Professional Documents
Culture Documents
Summer Camp Development
Summer Camp Development
1
C. PELAN LOKASI WISDEC 19
WISDEC LOCATION MAP
• WISDEC Banting, Selangor 20
• WISDEC Kota Kinabalu, Sabah 21
2
• Pembuatan perabot (sofa) 38
Furniture making (sofa)
• Pembuatan perabot (kabinet hiasan) 39
Furniture making (display cabinet)
• Teknologi dan operasi mesin kerja kayu – CNC Router 40
Technology and operation of wood working machines – CNC Router
• Kemasiapan kreatif dalam industri perabot dan produk berasaskan kayu 41
Creative finishing industry and wood based product
• Strategi pemasaran kreatif dan inovatif 42
Creative and innovative marketing strategy
• Pengkosan dan belanjawan produk 43
Product costing and budgetting
• Perancangan dan kawalan dalam industri perabot 44
Planning and control in furniture industry
G. PAKATAN STRATEGIK 59
STRATEGIC ALLIANCES
H. BORANG PERMOHONAN 61
APPLICATION FORM
3
A. PUSAT PEMBANGUNAN KEMAHIRAN INDUSTRI KAYU
WOOD INDUSTRY SKILLS DEVELOPMENT CENTRE
PUSAT PEMBANGUNAN KEMAHIRAN INDUSTRI KAYU
PENDAHULUAN
Lembaga Perindustrian Kayu Malaysia (MTIB) adalah sebuah Badan Berkanun Persekutuan yang bertanggungjawab terhadap pembangunan
industri perkayuan negara. Dalam melaksanakan tanggungjawab tersebut, MTIB telah mengambilkira aspek pembangunan sumber
manusia sebagai salah satu elemen yang amat kritikal yang perlu diberi penekanan, supaya industri perkayuan dapat mempertingkatkan
produktiviti, kecekapan, kualiti serta mempunyai produk yang bernilai tambah.
Oleh itu, bagi melaksanakan peranan tersebut dengan lebih berkesan, maka MTIB telah menubuhkan Pusat Pembangunan Kemahiran
Industri Kayu atau Wood Industry Skills Development Centre (WISDEC) di Banting, Selangor dalam tahun 1995 dan satu lagi di Kota
Kinabalu, Sabah dalam tahun 2005. Penubuhan WISDEC adalah selaras dengan matlamat negara iaitu untuk mempercepatkan
pemindahan teknologi dan tahap pemprosesan bagi produk kayu bernilai tambah seperti perabot, tanggam dan kayu kumai. Objektif
utama penubuhan WISDEC adalah:
• Menggalakkan pemindahan teknologi melalui latihan teknikal bagi memodenkan industri pemprosesan kayu; dan
VISI
WISDEC menjadi sebuah institusi unggul untuk latihan dan khidmat nasihat teknikal dalam pemprosesan hiliran kayu.
MISI
Mempertingkatkan pembangunan sumber manusia industri kayu, khasnya sektor pemprosesan hiliran kayu untuk meningkatkan produktiviti
dan daya saing industri berkenaan.
6
WOOD INDUSTRY SKILLS DEVELOPMENT CENTRE
INTRODUCTION
The Malaysian Timber Industry Board (MTIB) is a government agency, which is responsible for the development of timber industry. In the
implementation of its functions, MTIB has taken into account the aspect of human resource development as one of the critical elements
which needs to be stressed in order to enhance productivity, efficiency, quality and value-added products of the wood-based industry.
As an instrument to implement this role, MTIB established the Wood Industry Skills Development Centre (WISDEC) in Banting, Selangor
in 1995 and in Kota Kinabalu, Sabah in 2005.
The establishment of WISDEC is in line with the national aspiration to accelerate transfer of technology and processing level of value-
added timber products such as furniture, joinery and moulding. The main objectives of WISDEC are:
MISSION
To enhance the development of human resources in the timber industry, with special emphasis on downstream processing, for increased
productivity and competitiveness.
7
B. MAKLUMAT PROGRAM WISDEC
InFORMATION ON WISDEC PROGRAMME
MAKLUMAT PROGRAM LATIHAN
PROGRAM LATIHAN
Program latihan yang ditawarkan oleh WISDEC terdiri dari tiga kategori iaitu:
• Kursus ini hanya akan dijalankan pada hari Sabtu dan Ahad serta akan bermula dari bulan Mac 2013 sehingga September
2013.
Kaedah Latihan
Kaedah latihan menekankan latihan secara ‘hands-on’ yang mana peserta akan menggunakan kebanyakan masa untuk menjalani
kerja-kerja praktikal. Ini dilengkapkan lagi dengan latihan secara formal di dalam kelas. Lawatan juga diaturkan untuk memberi lebih
pendedahan.
Kemudahan Latihan
WISDEC mempunyai kemudahan latihan yang lengkap bagi menjalankan program latihan. WISDEC dilengkapi dengan bilik latihan, bilik
latihan komputer, bengkel kerja kayu, mesin-mesin kerja kayu, pusat sumber dan kelengkapan latihan lain.
Tenaga Pengajar
Selain daripada pegawai-pegawai WISDEC, tenaga pengajar luar juga adalah terdiri daripada mereka yang berpengalaman dalam industri
perkayuan, pusat penyelidikan dan institusi pengajian tinggi.
11
Sijil Kursus
MTIB mengeluarkan Sijil Kehadiran (Certificate of Attendance) kursus kepada setiap peserta yang mengikuti kursus dengan sepenuhnya.
Untuk Kursus Pengeringan Kayu, Sijil Kelayakan (Certificate of Competency) akan dianugerahkan kepada peserta-peserta yang lulus
dalam peperiksaan dengan jayanya. Bagi Skim Perantisan Industri Berasaskan Kayu (Perabot), peserta akan dianugerahkan:
i) Sijil Kemahiran Malaysia (Tahap 1 dan 2) oleh Jabatan Pembangunan Kemahiran (JPK).
ii) Sijil Perantisan oleh Pembangunan Sumber Manusia Berhad (PSMB) dan MTIB.
Insentif Latihan
MTIB merupakan di antara agensi yang telah disenaraikan sebagai Institusi Latihan Yang Diluluskan di bawah Kaedah-kaedah Cukai
Pendapatan (Potongan Bagi Latihan Yang Diluluskan) 1992. Syarikat-syarikat yang menghantar pekerja mereka untuk mengikuti kursus-
kursus yang dianjurkan oleh MTIB, boleh menikmati potongan cukai yang sewajarnya di bawah kaedah-kaedah ini.
Industri perkayuan juga boleh menikmati insentif latihan melalui skim-skim yang berkaitan dari PSMB. Skim-skim tersebut adalah:
i) Skim Bantuan Latihan (SBL) dengan syarat segala keperluan PSMB dipenuhi.
ii) Skim PROLUS - Beberapa kursus MTIB telah mendapat taraf ‘Approved Training Programme’ (ATP).
iii) Diskaun sebanyak 10 peratus untuk yuran kursus, akan diberi kepada syarikat / individu yang memenuhi mana-mana syarat
keperluan di bawah:
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
a) Mendaftar dan membuat bayaran yuran kursus sekurang-kurangnya satu bulan sebelum kursus yang dipohon dilangsungkan;
atau
b) Menghantar dua (2) atau lebih peserta dalam kursus yang dipohon pada jangkamasa yang sama; atau
c) Menyertai sebarang kursus bagi kali ketiga (3) atau lebih dalam satu tahun kalendar kursus.
Insuran
Peserta akan dilindungi oleh polisi insuran semasa latihan.
12
Pendaftaran / Bayaran / Yuran
Bayaran hendaklah dibuat dalam bentuk kiriman wang / wang pos / bank draf / cek berpalang, di atas nama Lembaga Perindustrian
Kayu Malaysia. Segala pembayaran hendaklah dibuat selewat-lewatnya satu minggu sebelum tarikh kursus dijalankan. WISDEC berhak
untuk tidak memulangkan bayaran yuran kursus sekiranya pemohon / peserta tidak hadir tanpa alasan yang munasabah. WISDEC berhak
meminda, membatalkan dan mengubah program, tenaga pengajar, tarikh serta tempat latihan.
Permohonan Kursus
Permohonan untuk mengikuti kursus boleh dibuat melalui borang permohonan yang disertakan di bahagian J. Maklumat mengenai kursus
juga boleh diperolehi melalui laman web MTIB (www.mtib.gov.my).
PROGRAM KONSULTANSI
Khidmat Perundingan
- WISDEC juga menawarkan khidmat perundingan di dalam dan luar negara di dalam Pemeringkatan Kayu, Pemprosesan Kayu,
Pengeluaran Perabot, Pengeringan Tanur dan lain-lain lagi. Sejajar dengan menyampaikan salah satu cabaran memastikan
penggunaan hutan berkekalan, WISDEC telah membuktikan kualiti latihan yang tinggi, khidmat yang dipanjangkan dan khidmat
perundingan untuk memudahkan pembangunan kerjaya Kursus ini memfokuskan inovasi dan rekabentuk tanpa batasan dengan
menggunakan bahan-bahan, identiti dan kemahiran pertukangan.
13
Information on TRAINING PROGRAMME
TRAINING PROGRAMME
The training programme offered by WISDEC is divided into three categories:
• This course will only be conducted on Saturday and Sunday and will start from the month of March 2013 until September
2013.
14
• Timber Drying Course
- This course is jointly organized by MTIB, Forest Research Institute Malaysia (FRIM) and University Putra Malaysia (UPM).
Participants who successfully complete the training as well as pass the examination will be awarded a ‘Certificate of
Competency’.
All courses offered are based on the task according to National Occupational Skills Standards (NOSS) that has been certified by
the Department of Skills Development (DSD). NOSS is a document that outlines the competency level required by a person skilled
workers working in Malaysia for any field and level of employment and the path to achieving the competency.
Key Features-NOSS:-
- Based on job.
- Conforming to career structure in a field of work.
- Prepared by industry experts and skilled workers who carry outwork.
The following is offered in the NOSS WISDEC:
RB: SOURCE BASIS (RESOURCE BASED)
RB-050-1 = furniture maker
RB-050-2 = Right Furniture Maker
RB-070-1 = Timber Operators
RB-070-2 = Wood Senior Operator
RB-071-1 = Wood Working Machine Operators
RB-071-2 = Senior Operator Woodworking Machine
RB-072-1 = Operator finish work
Training Methodology
Training methodology emphasizes on hands-on training where the participants spend most of their time doing their practical work. This
approach is complemented by the formal training in the classroom. Visits are also arranged for greater exposure.
Training Facilities
WISDEC has training facilities to execute its training programme. It is equipped with training rooms, computer lab, wood working workshop,
wood working machines, resource centre and other training facilities.
15
Award Of Certificate
MTIB will issue a Certificate of Attendance to its participants who successfully complete a course. A Certificate of Competency will be
awarded to the participants who successfully pass their exam for the Timber Drying Course. Participants who successfully complete the
Apprenticeship Scheme shall receive the following certificates:
i) Malaysian Skills Certificate (SKM Level 1 & 2) from Department of Skills Development.
ii) Certificate from Pembangunan Sumber Manusia Berhad (PSMB) and MTIB.
Training Incentives
MTIB is listed as an approved training provider under Tax Regulation (Deduction for approved training) 1992. Companies which send their
employee for training at MTIB will enjoy a tax deduction under this regulation.
Training incentive is also available under PSMB schemes. These schemes are:
i) Training assistance scheme (SBL).
ii) PROLUS scheme - Several of MTIB courses are recognized under the (Approved Training Programme).
iii) 10% discount of course fee will be given for those who fulfill the following conditions:-
a) Payment is made at least one month before the commencement of the course; or
b) Two (2) or more participants from a company attending the same course and duration; or
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
c) Participates in any course for the third (3) time or more in a calendar year.
Accommodation rate
Place Rate
WISDEC Banting, Selangor: 1. Terrace House RM 20.00 / participant / night
2. Condominium RM 50.00 / participant / night
WISDEC Kota Kinabalu, Sabah: Villa WISDEC RM 30.00 / participant / night
Insurance
Participants are covered with insurance policy during the training.
16
Registration / Payment / Fees
The payment should be made to Lembaga Perindustrian Kayu Malaysia by money order / postal order / bank draft / crossed cheque.
Payment should be made at least one week before the commencement of the course. No refund will be made if a participant is absent
without reasonable cause. WISDEC has the right to make any amendments, cancel and change the programme, speaker, date or training
venue.
Application
Applications for the training programme could be made through application form as attached in Appendix J. Please visit us at www.mtib.
gov.my for further information on the training programme.
CONSULTANCY PROGRAMME
Consultancy Services
- WISDEC meets the salient needs of the timber industry not only with training but extension and consultancy services locally and
internationally as well in Timber Grading, Wood Processing, Furniture Production and Kiln Drying etc. In tandem with addressing
one of the challenges of ensuring sustainable forest utilization, WISDEC has been providing high quality training, extension and
consultancy services to facilitate capacity development in industry particularly for the promotion of value-added products derived
from downstream processing.
17
C. PELAN LOKASI WISDEC
WISDEC LOCATION MAP
WISDEC SELANGOR
PELAN LOKASI
(Location Map)
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
WISDEC
Lot 167, Jalan 3,
Kompleks Perabot Olak Lempit,
42700 Banting, Selangor Darul Ehsan.
Tel: 03-3149 2924 Fax: 03-3149 2122
20
WISDEC SABAH
1. OBJEKTIF 1. OBJECTIVE
i. Untuk memberi pendedahan mengenai penggunaan asas i. To provide basic knowledge on the utilization of AutoCAD
AutoCAD dalam reka bentuk perabot for furniture design
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
Pengurus, eksekutif, penyelia, ketua bahagian, pekerja Managers, executives, supervisors, line leaders, operators,
pengeluaran, pereka bentuk, agensi kerajaan dan swasta designers, related government agencies and private
yang berkaitan
5. TARIKH 5. DATE
4-7 Februari 2013 (4 hari) – 28 jam 4-7 February 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 700 / peserta RM 700 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
24
PENGECAMAN SPESIS-SPESIS IDENTIFICATION OF MALAYSIAN
KOD: WR 302
KAYU MALAYSIA TIMBER SPECIES
1. OBJEKTIF 1. OBJECTIVES
i. Untuk memberi kefahaman cara mengenal kayu i. To provide understanding on wood identification
ii. Untuk mempertingkatkan kemahiran mengenal pasti jenis- ii. To enhance skills on identification of Commercial of
jenis kayu yang komersial di Malaysia Malaysian timbers
iii. Untuk memahami kegunaan dan kesesuaian penggunaan iii. To enhance knowledge on utilization and application of
kayu wood
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 525 / peserta RM 525 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
25
PENGGUNAAN CAD DALAM APPLICATION OF CAD IN
KOD: WD 409
1. OBJEKTIF 1. OBJECTIVE
i. Untuk memberi kemahiran dan pendedahan mengenai i. To provide skills and exposure on the utilization of
penggunaan AutoCAD dalam reka bentuk perabot AutoCAD for furniture design
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
yang berkaitan
5. TARIKH 5. DATE
Selangor – 25-28 Februari 2013 (4 hari) – 28 jam Selangor – 25-28 Februari 2013 (4 days) – 28 hours
Sabah – 20-22 September 2013 (3 hari) – 21 jam Sabah – 20-22 September 2013 (3 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Selangor / Sabah WISDEC Selangor / Sabah
7. YURAN 7. FEE
Selangor – RM 700 / peserta Selangor – RM 700 / participant
Sabah – RM 375 / peserta Sabah – RM 375 / participant
8. PENYELARAS 8. COORDINATOR
Selangor – Rohaiza Abdul Kadir Zailani Selangor – Rohaiza Abdul Kadir Zailani
Sabah – Mohd Faizal Abdul Rodzak Sabah – Mohd Faizal Abdul Rodzak
26
LEAN MANUFACTURING – LEAN MANUFACTURING –
KOD: WM 426
THE TOYOTA WAY THE TOYOTA WAY
1. OBJEKTIF 1. OBJECTIVE
i. Untuk memberi pengetahuan dalam pelaksanaan “Lean i. To give implementation knowledge on Lean Manufacturing
Manufactuirng – The Toyota Way” di dalam sistem industri – The Toyota Way in Malaysia furniture industry system
perabot di Malaysia
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 350 / peserta RM 350 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
27
PEMBUATAN PERABOT FURNITURE MAKING
KOD: WC 405
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan pengetahuan dalam pembuatan kabinet i. To Enhance knowledge on making of kitchen cabinet
dapur ii. To provide skills on furniture making, utilization of
ii. Untuk memberi kemahiran dalam pengunaan mesin kerja woodworking machines, equipments and materials.
kayu, bahan dan peralatan
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
25-28 Mac 2013 (4 hari) – 28 jam 25-28 Mac 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 700 / peserta RM 700 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
28
ASAS WOOD PROTECTION
KOD: WP 303
PERLINDUNGAN KAYU (BASIC)
1. OBJEKTIF 1. OBJECTIVES
i. Untuk memberi penerangan dan pendedahan mengenai i. To give an explanation and exposure about the basic
asas-asas perlindungan kayu domestik protection for domestic woods
ii. Untuk mempraktikkan kaedah serta teknik-teknik asas ii. To practice the methods and basic techniques to protect
perlindungan kayu berdasarkan jenis, saiz dan gred wood in term of size, types and grade
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 525 / peserta RM 525 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
29
KAWALAN KUALITI FURNITURE QUALITY
KOD: WM 427
PERABOT CONTROL
1. OBJEKTIF 1. OBJECTIVE
i. Untuk mengekalkan piawai kualiti bagi memastikan i. To maintain quality standards in order to ensure customer
kepuasan pelanggan dan mengurangkan kos yang terlibat satisfaction and to reduce the costs associated with the
akibat kerosakan produk scrapping of defective goods
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
9-10 April 2013 (2 hari) – 14 jam 9-10 April 2013 (2 days) – 14 hours
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 350 / peserta RM 350 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
30
PEMBUATAN KNOCK DOWN
KOD: WC 410
PERABOT FURNITURE
1. OBJEKTIF 1. OBJECTIVES
i. Untuk memberi pengetahuan mengenai konsep perabot i. To provide knowledge of prefabricated furniture concept
pasang siap dan aksesori yang bersesuaian dengan and accessories that are compatible
konsep tersebut ii. To provide skills in manufacturing furniture using
ii. Untuk memberi kemahiran dalam pembuatan perabot prefabricated concept
menggunakan konsep pasang siap
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
22-25 April 2013 (4 hari) – 28 jam 22-25 April 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 700 / peserta RM 700 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
31
PEMBANGUNAN FURNITURE DESIGN
KOD: WD 415
1. OBJEKTIF 1. OBJECTIVES
i. Untuk meningkatkan pengetahuan dalam pembangunan i. Enhanced knowledge in furniture design development
reka bentuk perabot ii. Developed skills in CAD Applications, specifications
ii. Untuk memberi kemahiran dalam aplikasi CAD, development and materials
pembangunan spesifikasi dan bahan mentah
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
Selangor – 13-16 Mei 2013 (4 hari) – 28 jam Selangor – 13-16 May 2013 (4 days) – 28 hours
Sabah – 27-29 April 2013 (3 hari) – 21 jam Sabah – 27-29 April 2013 (3 days) – 21 hours
6. TEMPAT 6. VENUE
WISDEC Selangor / Sabah WISDEC Selangor / Sabah
7. YURAN 7. FEE
Selangor – RM 700 / peserta Selangor – RM 700 / participant
Sabah – RM 375 / peserta Sabah – RM 375 / participant
8. PENYELARAS 8. COORDINATOR
Selangor – Rohaiza Abdul Kadir Zailani Selangor – Rohaiza Abdul Kadir Zailani
Sabah – Mohd Faizal Abdul Rodzak Sabah – Mohd Faizal Abdul Rodzak
32
PENGERINGAN KAYU (CoC) KILN DRYING (CoC)
KOD: WP 301
1. OBJEKTIF 1. OBJECTIVES
i. Untuk meningkatkan kefahaman mengenai pengeringan i. To increase the understanding of timber drying
kayu ii. To upgrade skills on timber drying technology
ii. Untuk meningkatkan kemahiran dalam teknologi
pengeringan kayu
4. PEPERIKSAAN 4. EXAMINATION
Peserta dikehendaki lulus dalam peperiksaan. Peserta Participants are required to pass a mandatory examination.
yang berjaya akan menerima Sijil Kelayakan Operator Successful participant will be awarded a Certificate of
Pengeringan Tanur Competency as Dry Kiln Operator
5. TARIKH 5. TARIKH
Selangor – 10-28 Jun 2013 (19 hari) – 133 jam Selangor – 10-28 Jun 2013 (19 days) – 133 hours
Sabah – 10-28 Jun 2013 (19 hari) – 133 jam Sabah – 10-28 Jun 2013 (19 days) – 133 hours
6. TEMPAT 6. TEMPAT
Selangor – FRIM, Kepong Selangor – FRIM, Kepong
Sabah – WISDEC Sabah Sabah – WISDEC Sabah
7. YURAN 7. YURAN
RM 1,500 / peserta RM 1,500 / peserta
8. PENYELARAS 8. PENYELARAS
Selangor – Rohaiza Abdul Kadir Zailani Selangor – Rohaiza Abdul Kadir Zailani
Sabah – Mohd Faizal Abdul Rodzak Sabah – Mohd Faizal Abdul Rodzak
33
OPERASI DAN PENYELENGGARAAN OPERATION AND MAINTENANCE OF
KOD: WT 409
1. OBJEKTIF 1. OBJECTIVES
i. Untuk meningkatkan pengetahuan tentang operasi dan i. To enhance knowledge on operation and maintenance of
penyelenggaraan mesin kerja kayu wood working machines
ii. Untuk memberi kemahiran di dalam mengendalikan ii. To provide skills in handling tools and wood working
peralatan dan mesin kerja kayu machines
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
5. TARIKH 5. DATE
2-4 September 2013 (3 hari) – 21 jam 2-4 September 2013(3 days) – 21 hours
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 525 / peserta RM 525 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
34
KEMASIAPAN PRODUK KAYU – TEKNIK WOOD PRODUCT FINISHING – COMPETENCY
KOD: WF 402
PENYEMBURAN UNTUK MENINGKATKAN OF SPRAYING TECHNIQUE TO INCREASE
KECEKAPAN KUALITI KAYU WOOD QUALITY FINISHING
1. OBJEKTIF 1. OBJECTIVE
i. Untuk meningkatkan pengetahuan dan kemahiran i. To upgrade knowledge and skills in spraying techniques
dalam teknik-teknik penyemburan untuk meningkatkan for increase efficiency and high quality wood product
kecekapan dan kualiti produk kayu
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali / Lawatan Lectures / Hands on training / Visit
5. TARIKH 5. DATE
23-26 September 2013 (4 days) – 28 jam 23-26 September 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Selangor WISDEC Selangor
7. YURAN 7. FEE
RM 700 / peserta RM 700 / participant
8. PENYELARAS 8. COORDINATOR
Rohaiza Binti Abdul Kadir Zailani / Rohaiza Binti Abdul Kadir Zailani /
Mohd Shairazi Yahya Mohd Shairazi Yahya
35
REKABENTUK DALAMAN INTERIOR DESIGN
KOD: WD 411
1. OBJEKTIF 1. OBJECTIVES
i. Platform terkini berkenaan perkembangan rekabentuk i. As a platform in latest status on the interior designing
dalaman (perabot ruang tamu) development (living room furniture)
ii. Meningkatkan kemahiran peserta dalam merekabantuk ii. To enhance participant skills in living room designing in
perabot ruang tamu seiring dengan kehendak semasa line with current needs
3. METODOLOGI 3. METHODOLOGY
Teori dan amali rekabentuk Lectures / Practical on design
5. TARIKH 5. DATE
13-16 April 2013 (4 hari) – 28 jam 13-16 April 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 500 / peserta RM 500 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
36
PENGENALAN KEPADA INTRODUCTION TO
KOD: WE 404
KREATIVITI DAN INOVASI INNOVATION AND CREATIVITY
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan pengetahuan dan daya kreativiti dalam i. Enhance knowledge and creativity in problem solving
penyelesaian masalah ii. Studying relationship between creativity and innovation
ii. Mempelajari perhubungan diantara kreativiti dan inovasi towards excellence
ke arah kecemerlangan inovasi iii. Studying technique of problems solving on individual,
iii. Mempelajari teknik penyelesaian masalah individu, group and organization
kumpulan dan organisasi
3. METODOLOGI 3. METHODOLOGY
Syarahan / LDK Lectures / Group activities
5. TARIKH 5. DATE
11-12 Mei 2013 (2 hari) – 14 jam 11-12 May 2013 (2 days) – 14 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 250 / peserta RM 250 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
37
PEMBUATAN PERABOT FURNITURE MAKING
KOD: WC 409
(SOFA) (SOFA)
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan pengetahuan dalam pembuatan perabot i. To enhance knowledge on making furniture (sofa)
(sofa) ii. To provide skills on furniture making (sofa),
ii. Memberi kemahiran dalam pembuatan perabot (sofa) utilization of woodworking machines in
penggunaan mesin yang digunakan dalam teknologi upholstery technology
upholstery
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali Lectures / Practical
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
5. TARIKH 5. DATE
18-21 Mei 2013 (4 hari) – 28 jam 18-21 May 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 500 / peserta RM 500 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
38
PEMBUATAN PERABOT FURNITURE MAKING
KOD: WC 406
(KABINET HIASAN) (DISPLAY CABINET)
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan pengetahuan dalam pembuatan kabinet i. Enhance knowledge in making of display cabinet
hiasan ii. Upgrade skills on determining material and tools
ii. Meningkatkan kemahiran dalam penentuan bahan dan iii. Ability to evaluate quality and costing
peralatan
iii. Menilai kualiti dan kos pembuatan kabinet hiasan
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali Lectures / Practical
5. TARIKH 5. DATE
8-11 Jun 2013 (4 hari) – 28 jam 8-11 June 2013 (4 days) – 28 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 500 / peserta RM 500 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
39
TEKNOLOGI DAN OPERASI MESIN TECHNOLOGY AND OPERATION OF WOOD
KOD: WT 403
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan kefahaman dalam pengaturcaraan mesin i. Enhance understanding on CNC machines
CNC programming
ii. Memahirkan peserta berkenaan panel kawalan dan ii. Up skills participants on CNC operation of
operasi mesin CNC panel machines
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali Lectures / Practical
Pengurus, penyelia, ketua Bbahagian, pekerja pengeluaran Managers, supervisors, line leaders, operators and
dan individu berminat interested individuals
5. TARIKH 5. DATE
24-26 Ogos 2013 (3 hari) – 21 jam 24-26 August 2013 (3 days) – 21 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 375 / peserta RM 375 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
40
KEMASIAPAN KREATIF DALAM CREATIVE FINISHING INDUSTRY
KOD: WF 404
INDUSTRI PERABOT DAN PRODUK AND WOOD BASED
BERASASKAN KAYU PRODUCT
(Sukatan Sijil Kemahiran Malaysia) (Sub-module from Malaysian Skills Certificate)
1. OBJEKTIF 1. OBJECTIVES
i. Untuk memberi pengetahuan mengenai jenis-jenis bahan i. Developing knowledge on finishing materials and it
kemasiapan dan ciri-cirinya contents
ii. Untuk memberi kefahaman tentang teknik-teknik ii. Provide understanding on the technique and its
kemasiapan dan aplikasinya applications
3. METODOLOGI 3. METHODOLOGY
Syarahan / Amali Lectures / Practical
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 500 / peserta RM 500 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
41
STRATEGI PEMASARAN KREATIF CREATIVE AND INNOVATIVE
KOD: WE 403
1. OBJEKTIF 1. OBJECTIVES
i. Memahami kepentingan peningkatan jumlah pelanggan i. Understanding importance of customers to determine
bagi menentukan prestasi perniagaan business performance.
ii. Mengetahui strategi dan kaedah-kaedah jualan berkesan ii. Strategy to increase total of customers and sales method
bagi meningkatkan prestasi jualan to increase sales performance.
iii. Mengetahui kepentingan perkhidmatan syarikat selepas iii. Importance of after sales service to increase sales
jualan bagi meningkatkan prestasi jualan performance.
3. METODOLOGI 3. METHODOLOGY
Syarahan / LDK Lectures / Group activities
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
5. TARIKH 5. DATE
28-29 September 2013 (2 hari) – 14 jam 28-29 September 2013 (2 days) – 14 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 250 / peserta RM 250 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
42
PENGKOSAN DAN BELANJAWAN PRODUCT COSTING AND
KOD: WM 411
PRODUK BUDGETTING
1. OBJEKTIF 1. OBJECTIVES
i. Untuk meningkatkan kefahaman mengenai pengkosan i. Enhanced understanding on budgeting and
dan belanjawan produk costing
ii. Memberi pengetahuan mengenai teknik-teknik pengkosan ii. Provide knowledge on product costing
harga produk technique
iii. Mengetahui kriteria utama dalam mempengaruhi kos iii. Major criteria affecting product costing
penghasilan produk iv. To learn and apply calculation method to
iv. Mempelajari dan mengaplikasi kaedah pengiraan sebenar determine product price
bagi penentuan harga produk
3. METODOLOGI 3. METHODOLOGY
Syarahan / Kajian kes / LDK Lectures / Case study / Group activities
5. TARIKH 5. DATE
19-20 Oktober 2013 (2 hari) – 14 jam 19-20 October 2013 (2 days) – 14 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 250 / peserta RM 250 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
43
PERANCANGAN DAN KAWALAN DALAM PLANNING AND CONTROL IN
KOD: WM 413
1. OBJEKTIF 1. OBJECTIVES
i. Meningkatkan pengetahuan dan teknik dalam i. Enhancing knowledge and techniques on production
perancangan pengeluaran planning
ii. Mengenalpasti elemen-elemen kos dalam pengeluaran ii. Identify the cost element in furniture production
perabot iii. Planning and controlling production cost
iii. Merancang dan mengawal kos pengeluaran
3. METODOLOGI 3. METHODOLOGY
Syarahan / Kajian kes / LDK Lectures / Case study / Group activities
5. TARIKH 5. DATE
26-27 Oktober 2013 (2 hari) – 14 jam 26-27 October 2013 (2 days) – 14 hours
6. TEMPAT 6. VENUE
WISDEC Sabah WISDEC Sabah
7. YURAN 7. FEE
RM 250 / peserta RM 250 / participant
8. PENYELARAS 8. COORDINATOR
Mohd Faizal Abdul Rodzak / Mohd Faizal Abdul Rodzak /
Hamdi Haji Mawardi Hamdi Haji Mawardi
44
E. KURSUS HUJUNG MINGGU YANG DITAWARKAN OLEH WISDEC
WEEKEND COURSES OFFERED BY WISDEC
KURSUS HUJUNG MINGGU YANG DITAWARKAN OLEH WISDEC
WISDEC Selangor
Metodologi : Teori dan amali
Tajuk Kursus Kandungan Kursus
Jangka masa kursus : 7 jam
KABINET HIASAN • Pengenalan kepada bahan mentah
(DIY FURNITURE) Jangkaan tarikh kursus : Mac 2013 sehingga September 2013
• Pengenalan kepada alatan tangan
Sasaran peserta : Pengusaha dan individu yang berminat
• Pengenalan kepada aksesori yang
diperlukan Tempat : WISDEC Selangor
• Teknik mengambil ukuran Yuran : Percuma
• Teknik pemasangan
Penyelaras : Pn. Rohaiza Abd Kadir Zailani /
• Teknik kemasiapan ala vintage En. Mohd Shairazi Yahya
WISDEC Sabah
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
46
WEEKEND COURSES
Weekend courses offered by WISDEC are as follows:
WISDEC Selangor
Methodology : Theory and Practice
Course Title Course Contents
Course length : 7 hours
DECORATIVE • Introduction to raw material
CABINET Expected date of the course : Mac 2013 untill September 2012
• Introduction to hands tools
(DIY FURNITURE) Target participants : Craft entreprenuer and interested
• Introduction to cabinet accessory
individuals
• Technique in dimension
measurement Venue : WISDEC Selangor
• Installation techniques Yuran : Free
• Vintage finishing technique
Coordinator : Mrs. Rohaiza Abd Kadir Zailani /
Mr. Mohd Shairazi Yahya
WISDEC Sabah
47
F. PROGRAM LATIHAN BELIA
YOUTH TRAINING PROGRAMMES
CERTIFICATE IN FURNITURE DESIGN AND MAKING (FDM)
1. INTRODUCTION
The Furniture Design and Making (FDM) is a programme which offers industrial skills training and knowledge on the wood-based
industry to young designers and fresh graduates.
Upon completing the programme, trainees will be able to contribute professionally towards sustaining the growth of the Malaysian
wood-based industry.
3. CAREER OPPORTUNITIES
Students will gain an in-depth insight into the professional process of solid timber furniture making from designing as well as translating
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
design into product making. After course completion, trainees may decide to pursue their career with furniture companies as designers
or to be self-employed.
4. IMPLEMENTATION
Entry requirements:-
a. Diploma or Bachelor’s Degree in furniture design.
b. Age between 18 to 25 years.
c. Has strong interest in the field and has intention to work with the industry or wish to be an entrepreneur.
Training Methodology
This programme emphasizes on hands-on training where trainees are given continuous practical application exercises, along with formal
classroom training by competent and highly experienced trainers from WISDEC as well as members of the timber industry. Students
will learn materials in furniture making, machines and tools in fine woodworking, development and construction of furniture in wood,
drawing and design; and business skills. This approach is extremely important as practical activities will enhance the effectiveness of
the training. The trainees are also taken on visits to factories for better exposure to the industry and to ensure a more complete training
experience.
50
Competencies Module:-
The programme is structured for attainment of specific competencies. Details of the module is as below:-
Duration of programme
2 months
Certification
Upon successfully completing the programme, trainees will be awarded the Certificate of Competency which is recognized by MTIB
and the industry.
51
PROFESSIONAL MANAGEMENT DEVELOPMENT PROGRAMME (PMD)
1. INTRODUCTION
1.1 The Professional Management Development Programme (PMD) is a programme which offers industrial skills training and
knowledge on the wood-based industry to young executives and fresh graduates. The structured practical training also involves
exposure to business practices in the industry.
1.2 Upon completing the programme, trainees will be able to contribute professionally towards sustaining the growth of the Malaysian
wood-based industry.
3. CAREER OPPORTUNITIES
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
3.1 The Malaysian timber industry stands as one of the most promising sectors in the plantation and commodities arena. Since the
launch of the First Industrial Master Plan in 1986, the wood-based industry has been accorded as one of the most promoted
industry. As a result of that the industry has grown rapidly and has become a major source of revenue for the country. Consequently,
there are great prospects for the graduates of this programme to be quickly and easily absorbed by the industry.
3.2 Graduates who undergo this programme will be equipped with skills and knowledge related to the wood-based industry. The
experience and ‘hands-on’ skills gained will enable the trainees to contribute to the development of a competitive wood-based
industry. This programme is designed to generate graduates who are able to manage, plan, market and undertake business
development practices.
4. IMPLEMENTATION
4.1 Entry requirements:-
a. Diploma or Bachelor’s Degree in any field.
b. Has strong interest in the field and has intention to work with the industry or wish to be an entrepreneur.
52
4.3 Competencies Module:-
a. The programme is structured for attainment of specific competencies. Details of the module is as below:-
4.6 Certification
Upon successfully completing the programme, trainees will be awarded the Certificate of Competency which is recognized by
MTIB and the industry.
53
CERTIFICATE IN TIMBER PROCESSING AND FINISHING TECHNOLOGY (TPF)
1. INTRODUCTION
The Certificate in Timber Processing and Finishing Technology (TPF) is a programme which provides an avenue for youths to enhance
skills and knowledge on the wood- based industry. The intensive hands-on training provides a structured skills enhancement programme
and is designed to produce competent, effective and skilled workforce to support the nation’s growing wood-based industry.
3. CAREER OPPORTUNITIES
The Malaysian timber industry stands as one of the most promising sectors in the plantation and commodities arena. Since the launch
of the First Industrial Master Plan in 1986, the wood-based industry has been accorded as one of the most promoted industry in the
sector. As a result of that the industry has grown rapidly and has become a major source of revenue for the country. Consequently,
there are great prospects for the graduates of this programme to be quickly and easily absorbed by the industry.
4. IMPLEMENTATION
Entry requirements:-
a. Pass in PMR, SPM, SPMV or its equivalent.
b. Age between 18 to 30 years.
c. Has strong interest in the field and has intention to work with the industry.
Training Methodology
This programme emphasizes on hands-on training where trainees are given continuous practical application exercises, along with
formal classroom training by competent and highly experienced trainers from WISDEC as well as members of the timber industry. This
approach is extremely important as practical activities will enhance the effectiveness of the training. The trainees are also taken on
visits to factories for better exposure to the industry and to ensure a more complete training experience.
54
Competencies Module:-
The programme is structured for attainment of specific competencies. Details of the module (Level 1) is as below:-
M01-5 KD/ Preservation I 90 hrs F01-3 Rules in set-up finishing shop 18 hrs
M01-6 Inventory, Safety & Health 18 hrs
F01-4 Layout and Finishing Flow 12 hrs
M01-7 Material Handling 30 hrs
M01-8 Industrial Attachment I 72 hrs F01-5 Finishing Materials 12 hrs
Total 420 hrs
F01-6 Finishing Equipments and Systems 30 hrs
Code Production Module Duration
P01-1 Safety 18 hrs F01-7 Technique and Process of Finishing 120 hrs
Medium of Instruction
The medium of instruction will be in English and Bahasa Melayu.
Duration of programme
12 months
Certification
Upon successfully completing the programme, trainees will be awarded the Certificate of Competency which is recognized by MTIB
and the industry.
55
WOOD-BASED INDUSTRY APPRENTICESHIP SCHEME (FURNITURE)
The scheme has been developed with a combination of theoretical training at selected training institutions, which emphasize on skills
training and structured on-the-job training at the premises of sponsoring employers.
2. IMPLEMENTATION
Sources of Apprentices/Entry Qualification
The target group of this scheme is PMR/SPM holders. Employers may recruit apprentices from their own sources or from PSMB’s
potential candidates database. The employers and Training Providers are also tree to advertise for candidates. Apprentices must have
at least a pass in Mathematics and English to qualify for the Wood-based Industry Apprenticeship Scheme (Furniture).
Curriculum
Training providers and sponsoring employers must use the curriculum provided by PSMB. The curriculum has been developed by
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
PSMB in collaboration with the Malaysian Timber Industry Board (MTIB) after extensive discussions with the industry. The functional
areas covered are:-
a. Phases 1 - Furniture Production Operation
b. Phase 2 - Furniture Production Line Leader
The curriculum is divided into 2 phases comprising of 38 weeks in Off-The-Job training. Upon completion of each training block at the
premises of training providers, apprentices will undergo 26 weeks of On-The-Job training at the premises of sponsoring employers to
provide ‘real-life’ learning. In general, the scheme consists of 30% theoretical and 70% practical training.
Competencies Module:-
The programme is structured for attainment of specific competencies. Details of the module is as below:-
56
Level 1 Furniture Maker RB-050-1
M2 Wood sizing 90 50
M3 Wood forming 90 50
M5 Membrane pressing 40 20
M7 Furniture assembling 90 80
English Communication 60 -
M2 Wood sizing II 30 50
M3 Wood lamination 50 50
M4 Wood forming II 30 50
M7 Furniture packaging 80 50
English Communication 60 -
57
Medium of Instruction
The medium of instruction will be in English.
Duration of Training
Certification
Upon successfully completing the competency test conducted by Department of Skills Development, apprentices will be awarded with
the Malaysian Skill Certificate Level 1 and Level 2.
Course Fee
The course fee of the Wood-based Apprenticeship Scheme (Furniture) will be paid by PSMB under the Apprenticeship Fund, which
was set up to assist employers, particularly small and medium employers. However, for the course fee to be paid by PSMB under the
Apprenticeship Fund, apprentices must be sponsored by employers registered with PSMB.
Monthly Allowance
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
Apprentices are eligible to get monthly allowance of between RM350.00 – RM500.00 from sponsoring employers.
58
G. PAKATAN STRATEGIK
STRATEGIC ALLIANCES
STRATEGIC ALLIANCES / PAKATAN STRATEGIK
WISDEC telah diiktiraf di peringkat tempatan dan antarabangsa WISDEC has been recognized locally and internationally as a
sebagai penyedia latihan dan khidmat perundingan bagi industri provider of training and consulting services for the wood-based
berasaskan kayu. industry.
Persatuan Kayu-kayan
• FIRA (United Kingdom)
Timber Trade Associations
• Malaysian Wood Industries Association
(MWIA) • ACIMALL, SCM & ACM (Itali)
• Malaysian Furniture Promotion Council
(MFPC) • Weinig & Alterdorf (Jerman)
• Malaysia Furniture Industry Council (MFIC)
• JICA (Jepun)
Institut Pengajian Tinggi
Higher Learning Institutions
• Universiti Putra Malaysia (UPM) • MTCP (Taiwan)
• Universiti Malaysia Kelantan (UMK)
PROGRAM LATIHAN MTIB 2013 / MTIB TRAINING PROGRAMME 2013
Organisasi Penyelidikan
Research Organizations
• Institut Penyelidikan Perhutanan Malaysia
(FRIM)
• Lembaga Minyak Sawit Malaysia (MPOB)
Badan-badan Kerajaan
Government Agencies
• Pembangunan Sumber Manusia Berhad
(PSMB)
• Jabatan Pembangunan Kemahiran (JPK)
• Jabatan Perhutanan Semenanjung Malaysia
(JPSM)
• PUSAKA Sarawak
60
H. BORANG PERMOHONAN
APPLICATION FORM
BORANG PERMOHONAN
Pengarah Pengarah
Pusat Pembangunan Kemahiran Industri Kayu (WISDEC) Pusat Pembangunan Kemahiran Industri Kayu (WISDEC)
Lot 167, Jalan 3, Kompleks Perabot Olak Lempit Lot 4, Fasa 1, Jalan Timur 6
42700 Banting, Selangor Taman Perindustrian Kota Kinabalu
U/p : i) Kamaruddin Othman Peti Surat 177, Pos Mini Indah Permai
atau
ii) Muhamad Faizul Razilah 88450 Kota Kinabalu, Sabah
Tel : 03-3149 2924, 03-3149 2630 Tel : 088-498 822
Faks : 03-3149 2122 Faks : 088-498 811 / 088-498 833
E-mel : wisdec@mtib.gov.my E-mel : mtibsabah@mtib.gov.my
Tuan,
..........................................................................................................................................................................................................................
Tandatangan : .............................................................................
Tarikh : .............................................................................
Bersama-sama ini disertakan *cek / bank draft / kiriman wang / wang pos no : ..................................... bernilai RM.....................................
sebagai yuran penyertaan. Sila sediakan bayaran atas nama LEMBAGA PERINDUSTRIAN KAYU MALAYSIA.
Sir,
MTIB TRAINING PROGRAMME 2013
Address : .............................................................................................................................................................................................
..........................................................................................................................................................................................................................
Signature : .............................................................................
Date : .............................................................................
Enclosed is the *cheque / bank draft / money order / postal order no: ........................................ amounted RM ..........................................
for the course fee. Payment should be made payable to LEMBAGA PERINDUSTRIAN KAYU MALAYSIA.