Professional Documents
Culture Documents
Installation Procedure ArcGIS.9.3
Installation Procedure ArcGIS.9.3
3 installation procedure
Step 1
Copy your ArcGIS Program to your disk for back up.
Step 2
License installation
1. Open the folder "…\arcgis9.3\crack" and observe that you have three folders there.
2. Doble clck the folder "license_server_setup" and run the file LMSetup.
4. Click the button “Browse” and then assign the file named “37102011.efl9” which is in the
address “….\arcgis9.3\crack\license_server_crack \ license_server_setup\” and then click
next. After a while proceed for the installation. When the installation is over then …
5. Select the option “NO, I will restart the compute Later” and then click OK.
6. By completing these steps License file should have been installed into the path
“C:\Program Files\ESRI\License\arcgis9x\”.
Step 3
Copy the Authentic exe and license files
Step 4
Configure the license file
5. Click the browse Button next to the address of “Path to the debug log file”. Observe that the
previously assigned addresses in all of the three panels disappear.
7. Click the Browse button next to the “Path to the license file”. Select the “Files of type as
License files (*.dat) and then select the file C:\Program
Files\ESRI\License\arcgis9x\37102011
1
8. Browse for the “Path to the lmgrd file” and select the file C:\Program
Files\ESRI\License\arcgis9x\lmgrd.exe.
9. Check in “Use services” and “Start server at power up”. (Please just ignore this step for
VISTA or window 2007 or black edition.)
10. Click Save service button and press Yes for saving.
11. Click Start/ stop/ Reread and press the button “Start Server.
13. If you get the information like “License can be checked out….” Then your license is set up
otherwise (such as “your license cannot be…”) you have to reinstall the license program
after uninstalling it.
Step 5
Install the ArcGIS main program
1. Go to the path G:\software\arcgis9.3\Desktop. Double click the set up.exe fill with the
computer icon and Wait for some time. Click next.
2. Select for “I Accept the license agreement.” and then click next.
4. Go on Clicking next for each dialog box until (or OK) the installation begins.
6. Wait until you get the message that “Your ARCGIS has been successfully installed.”
7. Click finish.
Step 6
Registering the Program
After the installation is over, still you have some steps more.
Note: You can access to your computer name by right clicking “my computer” in the desktop
and selecting properties.
2
"Availability": select "Arc Info Desktop (Floating)".
Step 7
Starting the ARCMAP
1. Open the ArcGIS program from the Start menu and enjoy GIS.
Success!
If you get your computer hanged or becomes slow times and again while you
are using ARCGIS then activate you ARCGIS License once again by following
the steps describe below.
I. For this, bring your cursor in the lower right corner of your monitor (near the
time display) and then right click.
IV. Click the tab image name to sort the processes running in your system
VII. Now go to the start menu and Click license manager and select for License
manager. Now select License Manager Tools.
VIII. Click the start/stop/Reread button and check the info “server start
successful” at the button.