Professional Documents
Culture Documents
Teenage
Teenage
10代工学は未来の製品と
コミュニケーションを生
み出すスタジオです。
engineering wireless audio view cart projects guides 私たちのミッションは
先端工学を用いて上質で
synthesizers checkout instagram downloads 機能的なデザインの
製品を作り出すことです。
2017 august designs soundcloud contact 是非、新たなスタイルで
youtube press 音楽をお楽しみください。
PO-32 programmable
drum and percussion
user guide ガイド
tonic
synthesizer
download as PDF
break away
hanger
selected
built-in
tempo
microphone
play / rec mode
indicates write time / node /
mode is active
additional info
lock tab sound
parameters A / B
alarm
pattern knob A / B
to select pattern hold
pattern and press 1-16
bpm accent
press to select tempo
hold to set master volume 1-16
hold step 1-16 + m
to set multiplier
effects
to use effects hold FX
and press 1-16
play / stop
sound 1-16
pattern 1-16
effects 1-16
write
1 ‒ getting started
insert two fresh AAA set time by turning knob A press sound + pattern. set reset the clock by removing
batteries. pay attention to for hours and knob B for alarm clock by turning A for the batteries and start over.
plus and minus poles. minutes. press any key to hours and B for minutes.
confirm and exit. (disable alarm by turning
knob A all the way down.)
press any key 1-16 to set
pattern for the alarm.
2 ‒ play
hold pattern and press any key from 1-16 to select press play to start playing. a pattern consists of 16
pattern. blinking led indicates active pattern. press play again to stop. steps.
3 ‒ making a beat
hold sound and press any key from 1-16 to select sound. press write to toggle rec press 1-16 to enter sound /
mode. ensure rec symbol is notes in grid. active steps
lit on screen. will be lit. press play to
listen to your pattern.
while playing, hold FX and press any key 1-16 to add effects. to record effects, first hold write while turning
enter rec mode with write button (ensure rec symbol is lit). to clear effects, hold FX in knobs to write sound
rec mode without pressing any other key. parameter changes over
time. when in rec mode,
hold a step and turn knobs
to adjust parameters for
that step.
to accentuate beats, press hold bpm and turn A to press bpm to switch tempo. hold bpm and turn B to
acc + 1-16 when in play adjust the swing. the bpm will be displayed in fine-tune tempo (from 60 to
mode. to program the upper right corner of 240 bpm).
accentuated steps, press the screen.
acc + 1-16 when in rec HIP HOP (80 bpm)
mode. DISCO (120 bpm)
TENCHO (140 bpm)
hold bpm and press any key while playing, hold write
1-16 to adjust master and press any key 1-16 to
volume. note: be careful punch in notes. notes will be
with the volume setting quantized along with
when using headphones. current swing setting.
only exceed volume setting release write when finished.
5 with caution.
5 ‒ making a song
pattern 1-16
hold write + pattern and press acc + pattern to clear hold pattern and select one pattern can be selected
press 1-16 to paste the the active pattern. which patterns 1-16 to chain multiple times. example
active pattern to the by pressing corresponding 1,1,1,4 plays pattern 1 three
corresponding new slot. keys 1-16. up to 64 patterns times then moves on to
can be chained. pattern 4. after last pattern
is played the sequence will
start over again.
6 ‒ data
it is possible to transfer on the transmitting unit: to receive via microphone: to receive via line in:
sound and pattern data press write + sound to press acc + sound to enter connect a 3.5mm stereo
directly between units, transmit data to receiving receive mode. place mic on cable from transmitting unit
using the built-in speaker unit. before transmitting receiving unit close to to receiving unit. press acc
and microphone, or using make sure the receiving unit speaker on transmitting + sound to enter receive
the line in/out connectors. is in receive mode. unit. send data from mode. send data from
transmitting unit. transmitting unit.
sound and pattern data can backup using built-in restore using microphone:
be stored to any recording speaker: first make sure press acc + sound to enter
device for saving and recording device is close to receive mode. place pocket
sharing. you can backup the pocket operator speaker. operator mic close to
data via built-in speaker or then start recording and recording device and start
line out. press write + sound to playback.
transmit data.
restore using line in:
backup using line out: first connect a cable from
connect a cable from recording device to
pocket operator line out to receiving pocket operator
recording device. then start unit. press acc + sound to
recording and press write + enter receive mode. send
sound to transmit data. data from recording device.
7 ‒ microtonic transfer
microtonic
vst/au
to replace a sound 1-16 on tweak a sound in microtonic to receive via microphone: to receive via line in:
PO-32 tonic use microtonic (knob A on PO-32 tonic press acc + sound to enter connect a 3.5mm audio
standalone version, or the represents pitch, knob B receive mode. place mic on cable from computer to
vst/au plugin in any daw of represents morph) and receiving unit close to receiving unit. press acc +
choice. press [the TE logo] on the computer speaker. press sound to enter receive
interface to prepare for destination button in mode. press destination
transfer. microtonic and the transfer button in microtonic to start
will start. the transfer.
it is possible to sync connect a standard stereo hold acc and press bpm on there are 5 sync modes.
multiple pocket operators audio cable between the master unit to toggle sync default mode is SY0.
with a click track using line units. the master unit will modes. press repeatedly to when sync is used the
in and out. control the tempo of the toggle between different signal will be split between
slave unit. audio (right) and sync (left).
warning: sync levels should
not exceed 5vpp (volt peak-
to-peak).
sync scenarios
example A: sync three pocket operator units. example B: sync external device such as volca,
iPhone, computer or synckontrol to PO-32.
audio
example C: sync an external device to two pocket example D: sync PO-32 to an external device.
operator units.
break away
hanger don't have
a pro case?
buy here.
make sure
the folding stand
is also removed.
to mount the pro case to a pocket operator, wrap the pro case around the edges of the unit.
first you need to break away the hanger and remove make sure the edges of the case is tightly fit.
the folding stand.
english chile