Professional Documents
Culture Documents
01 WM - Fixed Bins
01 WM - Fixed Bins
In this storage type each bin is fixed for a particular material in MMR wm-2 view and always material
will be placed or removed from that bin only.
Pre-requisites:
1) In the storage type put away strategy should – (F) and add to existing stock must be selected
and removal Strategy should be P (fixed bin from MMR).
2) No need of storage section check is not required because in the placement process, the system
directly picks the fixed bin from MMR with respective strategy.
Storage section search and storage bin search are not required for the fixed bin process
because SUT and Storage section search and not active in storage type 005.(Fixed BIN)
Test Scenario:
Create Material Master in WM view-1 maintain the stock removal and stock placement
Indicator.
WM View-2 maintain the storage bin (where the stock will be place to this fixed bins)
Maximum Qty allowed per bin is mentioned in the WM-View 2, and then it will not allow
more than that qty.
Step 2: Create PO
Step 3: Create GR w.r.t PO
Step 4: Created TO w.r.t TR 142, because of fixed bin the material is placed in A-01 bin,
which is maintained in MMR WM View -2 Storage Bin.
Removal Process:
Step 1: Goods Issue
Step 2: Create TO