Professional Documents
Culture Documents
Composite Beams Flowchart
Composite Beams Flowchart
00
Ecm 31475.81 Mpa gm1 1.00
fy 355.00 Mpa gmv 1.25
L 6300.00 mm
CONSTRUCTION STAGE
Loads to take into account
1- SW of concrete slab
2- SW of metal deck
3- SW of steel beam
4- Variable action of construction load: 0.75 kPa or 1.5*3*3kN at middle span
Profile: UB 254x146x43
Check the steel section for:
1- Shear resistance given by the steel beam Vsd = 54.00
2- Bending resistance and interaction of M-V Msd = 104.30
3- Lateral torsional buckling of the steel beam Msd = 104.30
4- Deflection due to SD (d1,cs) and LL (d2,cs) d1,cs = 13.52
COMPOSITE STAGE
Loads to take into account
1- SW of concrete slab
2- SW of metal deck
3- SW of steel beam
4- Floor finishes
5- Any other variable action
Method 2
Calculate deflection due to Floor finishes (d1,comp) using nLT:
nLT = 20.02
Calculate Jid using n above
Calculate deflection due to LL (d2,comp) using nST:
nST = 6.67
Calculate Jid using n above
Final deflection: d1,cs+d1,comp+d2,comp < L/250
Live load deflection: d2,comp < L/360
1 #REF!
ff,end_support = 1150.00 mm 2 #DIV/0!
19.00 mm smin = 95.00 mm 3 #REF!
415.60 kNm ratio = 0.44 OK 0
5 0
A RITEGNI TORSIONALI
RITEGNI TORSIONALI