Professional Documents
Culture Documents
Vishay Semiconductors
FEATURES
• Current transfer ratio, 50 % typical
• Leakage current, 1.0 nA typical
A 1 8 E
• Two isolated channels per package
C 2 7 C • Compliant to RoHS Directive and in
C
accordance to WEEE 2002/96/EC
3 6 C
A 4 5 E AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
i179073 • CSA 93751
• BSI IEC 60950; IEC 60065
DESCRIPTION
The MCT6 is a two channel optocoupler for high density
applications. Each channel consists of an optically coupled
pair with a gallium arsenide infrared LED and a silicon NPN
phototransistor. Signal information, including a DC level,
can be transmitted by the device while maintaining a high
degree of electrical isolation between input and output.
The MCT6 is especially designed for driving medium-speed
logic, where it may be used to eliminate troublesome ground
loop and noise problems. It can also be used to replace
relays and transformers in many digital interface
applications, as well as analog applications such as CRT
modulation.
ORDERING INFORMATION
DIP
M C T 6 - X 0 0 # T
1.4 1.5
Normalized to:
1.3 VCE = 10 V, IF = 10 mA,TA = 25 °C
Tamb = - 55 °C
1.0
0.5
0.9 Tamb = 85 °C
NCTR(SAT)
0.8 NCTR
0.7 0.0
0.1 1 10 100 0.1 1 10 100
IF - Forward Current (mA) IF - LED Current (mA)
iilct6_01 iilct6_03
Fig. 1 - Forward Voltage vs. Forward Current Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5 1.5
Normalized to:
Normalized to:
VCE = 10 V, IF = 10 mA VCE = 10 V, IF = 10 mA
NCTR - Normalized CTR
NCTR - Normalized CTR
Tamb = 25 °C Tamb = 25 °C
1.0 CTRCE(sat) VCE = 0.4 V 1.0
CTRCE(sat) VCE = 0.4 V
Tamb = 70 °C
0.5 0.5
NCTR(SAT)
NCTR NCTR(SAT)
NCTR
0.0 0.0
0.1 1 10 100 0.1 1 10 100
IF - LED Current (mA) IF - LED Current (mA)
iilct6_02 iilct6_04
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current LED Current
0.5 10 1.5
tpLH
NCTR(SAT)
NCTR
0.0 1 1.0
0.1 1 10 100 0.1 1 10 100
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. Fig. 8 - Propagation Delay vs. Collector Load Resistor
LED Current
IF
35
30
ICE - Collector Current (mA)
25 50 °C
20
70 °C t PHL
15 25 °C
85 °C t PLH
10 VO
5 tS
50 %
0
0 10 20 30 40 50 60
tF
IF - LED Current (mA) iilct6_09 tD tR
iilct6_06
Fig. 6 - Collector Emitter Current vs. Temperature and LED Current Fig. 9 - Switching Timing
105
104
I CEO - Collector Emitter (nA)
V CC = 5 V
103
102
Vce = 10 V IF = 10 mA
101
Typical
100 VO
10- 1 f = 10 kHz,
R L = 100 Ω
-2 DF = 50 %
10
- 20 0 20 40 60 80 100
Tamb - Ambient Temperature (°C)
iilct6_10
iilct6_07
4 3 2 1
6.645 ± 0.165
5 6 7 8
ISO method A
9.77 ± 0.14
0.95 ± 0.19
7.62 typ.
0.79
4° typ.
3.555 ± 0.255
6.095 ± 0.255
1.27 10°
0.70 ± 0.19 3.045 ± 0.255
3° to 9°
0.51 ± 0.05
2.54 typ.
i178006
0.25 ± 0.05
Option 7 Option 9
9.53
7.62 typ. 10.03
7.62 ref.
0.7 4.6
4.1 0.102
0.249
8 min. 0.30 typ.
0.51
1.02
8.4 min. 15° max.
8 min.
10.3 max.
0.76 0.76
R 0.25 R 0.25
2.54 2.54
1.78 1.78
PACKAGE MARKING
MCT6
V WWY H 68
Notes
• Only options 1 and 7 reflected in the package marking
• The VDE logo is only marked on option 1 parts
• Tape and reel suffix (T) is not part of the package marking
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.