Professional Documents
Culture Documents
Pages From Cisco - 300-135 PDF
Pages From Cisco - 300-135 PDF
We guarantee you can pass any IT certification exam at your first attempt with just 10‐12
hours study of our guides.
Our study guides contain actual exam questions; accurate answers with detailed explanation
verified by experts and all graphics and drag‐n‐drop exhibits shown just as on the real test.
To test the quality of our guides, you can download the one‐fourth portion of any guide from
http://www.certificationking.com absolutely free. You can also download the guides for retired
exams that you might have taken in the past.
For pricing and placing order, please visit http://certificationking.com/order.html
We accept all major credit cards through www.paypal.com
For other payment options and any further query, feel free to mail us at
info@certificationking.com
Page No | 2
Question 1
Exhibit:
A network administrator is troubleshootnn an EIGRP connecton between RouterA, IP address 10.1.2.1, and RouterB,
IP address 10.1.2.2. Given the debun output on RouterA, which two statements are true? (Choose two.)
Aoswern D,F
Question 2
When troubleshootnn an EIGRP connectvity problem, you notce that two connected EIGRP routers are not
becominn EIGRP neinhbors. A pinn between the two routers was successful. What is the next thinn that should be
checked?
A. Verify that the EIGRP hello and hold tmers match exactly.
B. Verify that EIGRP broadcast packets are not beinn dropped between the two routers with the show ip EIGRP peer
command.
C. Verify that EIGRP broadcast packets are not beinn dropped between the two routers with the show ip EIGRP trafc
command.
D. Verify that EIGRP is enabled for the appropriate networks on the local and neinhborinn router.
Aoswern D
Question 3
________________________________________________________________________________________________
www.Certificationking.com
Page No | 3
How would you confrm on R1 that load balancinn is actually occurrinn on the default-network (0.0.0.0)?
A. Use pinn and the show ip route command to confrm the tmers for each default network resets to 0.
B. Load balancinn does not occur over default networks; the second route will only be used for failover.
C. Use an extended pinn alonn with repeated show ip route commands to confrm the nateway of last resort address
tonnles back and forth.
D. Use the traceroute command to an address that is not explicitly in the routnn table.
Aoswern D
Question 4
Which IPsec mode will encrypt a GRE tunnel to provide multprotocol support and reduced overhead?
A. 3DES
B. multpoint GRE
C. tunnel
D. transport
Aoswern D
Question 5
Which three features are benefts of usinn GRE tunnels in conjuncton with IPsec for buildinn site-to-site VPNs?
(Choose three.)
Aoswern A,B,D
Question 6
________________________________________________________________________________________________
www.Certificationking.com
Page No | 4
A. The GRE tunnel source and destnaton addresses are specifed within the IPsec transform set.
B. An IPsec/GRE tunnel must use IPsec tunnel mode.
C. GRE encapsulaton occurs before the IPsec encrypton process.
D. Crypto map ACL is not needed to match which trafc will be protected.
Aoswern C
Question 7
You enabled CDP on two Cisco Routers which are connected to each other. The Line and Protocol status for the
interfaces on both routers show as UP but the routers do not see each other a CDP neinhbors. Which layer of the OSI
model does the problem most likely exist?
A. Physical
B. Session
C. Applicaton
D. Data-Link
E. Network
Aoswern D
Question 8
FCAPS is a network maintenance model defned by ISO. It stands for which of the followinn?
A. Fault Mananement
B. Acton Mananement
C. Confnuraton Mananement
D. Protocol Mananement
E. Security Mananement
Aoswern A,C,E
Question 9
Which three mananement catenories are contained in the FCAPS network maintenance model? (Choose three.)
A. Confn
B. Fault
C. Storane
D. Accountnn
E. Redundancy
F. Telecommunicatons
Aoswern A,B,D
________________________________________________________________________________________________
www.Certificationking.com
Page No | 5
Question 10
A. Messanes with a severity level of 4 and hinher will be lonned to all available TTY lines.
B. Only warninn messanes will be lonned on the console.
C. Warninn, error, critcal, and informatonal messanes will be lonned on the console.
D. Warninn, critcal, alert, and emernency messanes will be lonned on the console.
E. The lonninn console warninn command needs to be followed in the confnuraton with
lonninn bufered byte size to specify the messane bufer size for the console.
Aoswern D
Question 11
A. These two lon messanes will not have a severity level. They are not errors but are just informatonal messanes.
B. The frst lon messane is catenorized as a warninn messane.
C. These messanes renardinn interface status are normal output and will always be displayed when you exit confn
mode.
D. The frst lon messane is an error messane with a severity level of 3.
E. The second messane would be shown if the lonninn console warninn command had been issued.
Aoswern D
Question 12
A. These commands will nenerate an error messane because you cannot use an access list with any debun commands.
B. These commands will have no efect at all. The debun ip packet command will work as normal and display info for
all IP packets.
C. These commands turn on debun ip packet only for packets between hosts 10.1.1.1 and
172.16.1.1.
D. These commands will only work when you specify only one host rather than two.
Aoswern C
Question 13
What is the result if you confnure two devices with the ntp server command?
________________________________________________________________________________________________
www.Certificationking.com
Page No | 6
A. Nothinn will happen untl one of the devices is confnured with the prefer parameter.
B. The NTP protocol will determine which server is most reliable and will synchronize to that server.
C. The device with the hinhest priority will become the actve server and the other device will become the backup
server.
D. The device with the lowest MAC address will become the actve server and the other device will become the
backup server.
Aoswern B
Question 14
A technician is troubleshootnn connectvity problems between two routers that are directly connected throunh a
serial line. The technician notces that the serial line is up, but cannot see any neinhbors displayed in the output of the
show cdp neinhbors command.
In which OSI layer is the problem most likely occurrinn?
A. physical
B. data link
C. network
D. transport
E. applicaton
Aoswern B
Question 15
A. PPDIOO
B. structured
C. botoms up
D. interrupt-driven
Aoswern B,D
Question 16
Which two statements about the Cisco Aironet Desktop Utlity (ADU) are true? (Select two)
A. The Aironet Desktop Utlity (ADU) profle mananer feature can create and manane only one profle for the wireless
client adapter.
B. The Aironet Desktop Utlity (ADU) can support only one wireless client adapter installed and used at a tme.
C. The Aironet Desktop Utlity (ADU) can be used to establish the associaton between the client adapter and the
access point, manane authentcaton to the wireless network, and enable encrypton.
D. The Aironet Desktop Utlity (ADU) and the Microsof Wireless Confnuraton Mananer can be used at the same tme
to confnure the wireless client adapter.
Aoswern B,C
________________________________________________________________________________________________
www.Certificationking.com
Page No | 7
Question 17
At which layer of the OSI model does the Spanninn Tree Protocol (STP) operate at?
A. Layer 5
B. Layer 4
C. Layer 3
D. Layer 2
E. Layer 1
Aoswern D
Question 18
In computer networkinn a multcast address is an identfer for a nroup of hosts that have joined a multcast nroup.
Multcast addressinn can be used in the Link Layer (OSI Layer 2), such as Ethernet Multcast, as well as at the Internet
Layer (OSI Layer 3) as IPv4 or IPv6 Multcast. Which two descriptons are correct renardinn multcast addressinn?
A. The frst 23 bits of the multcast MAC address are 0x01-00-5E. This is a reserved value that indicates a multcast
applicaton.
B. The last 3 bytes (24 bits) of the multcast MAC address are 0x01-00-5E. This is a reserved value that indicates a
multcast applicaton.
C. To calculate the Layer 2 multcast address, the host maps the last 23 bits of the IP address into the last 24 bits of the
MAC address. The hinh-order bit is set to 0.
D. The frst 3 bytes (24 bits) of the multcast MAC address are 0x01-00-5E. This is a reserved value that indicates a
multcast applicaton.
Aoswern C,D
Question 19
EIGRP is beinn used as the routnn protocol on the Company network. While troubleshootnn some network
connectvity issues, you notce a larne number of EIGRP SIA (Stuck in Actve) messanes. What causes these SIA routes?
(Select two)
✑ The neinhborinn router stops receivinn ACK packets from this router.
A. The neinhborinn router starts receivinn route updates from this router.
B. The neinhborinn router is too busy to answer the query (nenerally caused by hinh CPU utlizaton).
C. The neinhborinn router is havinn memory problems and cannot allocate the memory to process the query or build
the reply packet.
Aoswern C
Question 20
You want to enhance the security within the Company LAN and prevent VLAN hoppinn. What two steps can be taken
to help prevent this? (Select two)
________________________________________________________________________________________________
www.Certificationking.com
Page No | 8
Aoswern C,D
Question 21
Aoswern D
Question 22
What level of lonninn is enabled on a Router where the followinn lons are seen?
%LINK-3-UPDOWN: Interface FastEthernet0/1, channed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, channed state to up
A. alerts
B. critcal
C. errors
D. notfcatons
Aoswern D
Question 23
________________________________________________________________________________________________
www.Certificationking.com
Page No | 9
Aoswern B,D
Question 24
You have 2 NTP servers in your network - 10.1.1.1 and 10.1.1.2. You want to
confnure a Cisco router to use 10.1.1.2 as its NTP server before fallinn back to
10.1.1.1. Which commands will you use to confnure the router?
Aoswern C
Question 25
A. Warninns only
B. debunninn, informatonal, notfcatons, warninns
C. warninns, errors, critcal, alerts, emernencies
D. notfcatons, warninns, errors
E. warninns, errors, critcal, alerts
Aoswern C
Question 26
Which two of the followinn optons are catenories of Network Maintenance tasks?
A. Firefnhtnn
B. Interrupt-driven
C. Policy-based
D. Structured E. Foundatonal
Aoswern B,D
Question 27
A customer network ennineer has made confnuraton channes that have resulted in some loss of connectvity. You
have been called in to evaluate a switch network and sunnest resolutons to the problems.
________________________________________________________________________________________________
www.Certificationking.com
Page No | 10
________________________________________________________________________________________________
www.Certificationking.com
Page No | 11
________________________________________________________________________________________________
www.Certificationking.com
Page No | 12
PC2 in VLAN 200 is unable to pinn the nateway address 172.16.200.1; identfy the issue.
Aoswern C
Explanaton:
________________________________________________________________________________________________
www.Certificationking.com
Page No | 13
By lookinn at the confnuraton for SW2, we see that it is missinn VLAN 200, and the “switchport access vlan 200”
command is missinn under interface eth 0/0:
Question 28
A customer network ennineer has made confnuraton channes that have resulted in some loss of connectvity. You
have been called in to evaluate a switch network and sunnest resolutons to the problems.
________________________________________________________________________________________________
www.Certificationking.com