Professional Documents
Culture Documents
What are the friction details provide to upper & lower die?
Select one:
a. Graphite+water_Hot(Steel)
b. Soap_cold(Steel)
c. Soap_cold(Aluminium)
d. Graphite+water_Hot(aluminium)
Select one:
a. 70.2
b. 12.5
c. 62.3
d. 45.7
For assigning press details, initially upper die velocity in mm/sec is
Select one:
a. -100
b. -300
c. -200
d. 0
Under the forming control tab, the effective strain rate is reset to
Select one:
a. 0.0001
b. 0.01
c. 0.1
d. 0.001
During post processing, at the end of 3rd stage, the maximum nodal force in N is
Select one:
a. 12.4
b. 11.4
c. 7.4
d. 9.4
how many CAD models required for this forging simulation?
Select one:
a. 6
b. 7
c. 5
d. 8
The type of simulation, initially assign at the creation of new file is 3D without flash.
Select one:
True
False
During post processing; which of the following option available under the deformation tab
Select one:
a. Flow line
b. Under fill
c. Die contact
d. Effective stress
The die stopping distance during forming control in 2nd stage is
Select one:
a. 45.7
b. 62.3
c. 112.5
d. 12.5