Professional Documents
Culture Documents
ST Issue 5
Limiting conditions
Body design conditions ANSI 600
PMA - Maximum allowable
pressure 103 bar g 1
TMA - Maximum allowable
temperature 525°C
PMO - Maximum operating
pressure 62 bar g 4
TMO - Maximum operating
temperature 525°C
Maximum operating TD62 - 80% of upstream pressure
PMOB -
backpressure: TD62L - 50% of upstream pressure 12
Designed for a maximum cold hydraulic test pressure of 155 bar g
3
Operating range
525
Temperature°C
400
300
200
Steam
100 saturation
0 curve
0 20 40 60 62* 80 103
Pressure bar g
The product must not be used in this region.
* PMO Maximum operating pressure for saturated steam service.
PMOB Maximum operating backpressure:
TD62 - 80% of upstream pressure
TD62L - 50% of upstream pressure
Note: Minimum pressure for satisfactory operation is:
TD62 1.4 bar g TD62L 8 bar g
Materials
No. Part Material No. Part Material
*1 Body Steel ASTM A217 Gr. WC 6 Spirally wound stainless steel 'Metaflex'
10 Cover gasket
2 Cover Steel ASTM A217 Gr. WC 6 with exfoliated; graphite filler Type C
3 Strainer cap Steel ASTM A217 Gr. WC 6 11 Name-plate Stainless steel
4 Strainer screen Stainless steel 100 mesh 316L 12 Cap gasket Reinforced exfoliated graphite
5 Insulating cover Aluminium BS 1470 1200 S1C H4 * Note: Item 7 (seat) is vacuum brazed into Item 1 (body).
6 Disc Chromium steel BS 4659 Gr. BD2
*7 Seat Chromium steel BS 4659 Gr. BD2 Certification
This product is available with certification to EN 10204 3.1.B.
8 Cover studs Steel ASTM A193 Gr. B16
Note: All certification / inspection requirements must be stated at
9 Cover nuts Steel ASTM A194 Gr. 8M the time of order placement.
Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification. © Copyright 2002
Dimensions /weights (approximate) in mm and kg Spare parts
The spare parts available are shown in heavy outline. Parts drawn
Size A B C D E F Weight in broken line are not supplied as spares.
½" 79 92 92 51 20 51 2.08 Available spares
¾" 79 92 92 51 20 51 2.08 Insulating cover 5
1" 84 100 92 46 20 51 2.43 Set of cover studs and nuts (set of 4) 8, 9
Disc (packet of 3) 6
F Withdrawal distance Strainer screen 100 mesh 4
Set of gaskets (packet of 3 of each) 10, 12
How to order spares
Always order spares by using the description given in the column
C headed 'Available spares' and state the size and type of trap.
Example: 1 - Strainer screen for a Spirax Sarco ½" TD62L
thermodynamic steam trap.
D 9
6
E Withdrawal distance
Capacities 10
500 8
400
300 TD62
200
Condensate kg /h
2L
100 TD6
50
40 4
30
20
1.4 2 3 4 5 10 20 30 40 50 62
Differential pressure bar (x 100 = kPa) 12
TD62 and TD62L Thermodynamic Steam Trap (Screwed /Socket Weld) TI-P068-08 ST Issue 5