You are on page 1of 1

Attempt all the following questions.

41a. What would be the WFT if 16 litres of paint was applied to an area (smooth) 12m x 8m?

41b. Calculate the DFT of a paint with 47% solids applied at 94 µm.

42a. ‘Linear’ is a type of polymer; identify two others

………………………………. …………………………….

42b. Epoxy coatings have……………………………………………………… type polymers

42c. Air drying Alkyd coatings have ………………………………………… type polymers

42d. Chlorinated rubber coatings are


Convertible Non-Convertible
(Delete as appropriate)

43. In less than thirty words describe the duties of a painting inspector.
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
44. Identify four types of normative document

.............................................................. ..............................................................

.............................................................. ..............................................................

45. Describe the Barrier method of protecting with paint


…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
…………………………………………………………………………………
………………………………………………………………

Identify two other methods of protecting by paint

…………………………………………………………………………………
…………………………………………………………………………………

Results

June 2009
Examiner Date

You might also like