Professional Documents
Culture Documents
SUNTEL CO.,LTD
Table of Contents
SAILOR® SART II 62
www.suntel.com.vn
SUBSEA SOLUTION
3
BRINGING CLARITY TO THE WORLD BELOW
The technology within underwater mapping is continuously advancing and providing higher quality data than ever
before. This technology is taking subsea construction, naval surveillance and the exploration and mapping of the
OUR MISSION OUR PHILOSOPHY sea floor to new levels, allowing efficient and accurate data capture from waters in sheltered ports to the harshest
We shall earn the respect and recognition for our Our success depends on the success of our customers. and most challenging environments.
dedication to provide innovative and reliable marine Actively listening to our customers and truly understanding
electronics that ensure optimal operation at sea. By their needs, and then translating these needs into Kongsberg Maritime is at the forefront of these KONGSBERG offers a broad range of echo sounders that
utilising and integrating our technology, experience successful products and solutions is central to achieving advancements; there are many challenges to be overcome can be operated from any platform, making them ideal for
and competencies in positioning, hydroacoustics, our goal. in the subsea environment and KONGSBERG has spent exploring anywhere from the shallowest waters in ports
communication, control, navigation, simulation and Our people are the key to our success and we empower over 60 years mastering the technology needed to lead and harbours to the world's deepest oceans.
automation, we aim to give our customers The Full Picture. them to achieve. Working together in a global network of the way within the maritime industry.
The Full Picture yields professional solutions and global knowledge, guided by our values, engenders innovation
services that make a difference enabling you to stay ahead and world class performance. Every day we have to think
of the competition. a little differently, because every client is unique. We aspire
to translate the imagination and dedication of our staff into
successful technologies and solutions. Our commitment is
to add value to your operations by providing you with The
Full Picture.
4 5
MULTIBEAM ECHO SOUNDERS FM Chirp
All EM® systems utilise both CW and FM Chirp.
Seabed Image
All EM® multibeam echo sounders produce and store
FM Chirp is used in order to increase the range without seabed image data simultaneously.
sacrificing resolution. For example, a 12ms FM pulse equals
to a 600us CW pulse in terms of resolution, but with FM Water column and extra detection
Chirp the transmit power is increased by 13dB. All systems are able to generate and log water column
data. Water column (WC) data can either be logged
Kongsberg Maritime is the leading manufacturer of transmit fan is divided into several sectors. Each sector can Dual swath together with the raw files or as separate WC files.
multibeam echosounders for shallow, medium and deep be controlled individually in real time, enabling the system In dual swath mode the systems generate two transmit In addition, the EM 2040 and EM 2040C can log
water applications and has delivered systems since the mid to actively stabilise pitch and yaw in real time. The receive swaths per ping resulting in twice the number of simultaneous extra detections. Extra detections are
1980's. Many of the systems have become the industry beams are also stabilised for roll movements in real-time. soundings given per ping. This gives a much denser profile soundings based on different user selectable criteria and
standard due to their unique features. The result is a uniform and dense survey pattern which of the seabed even with a narrow transmitter or when logged to the raw file as extra soundings. In conjunction
leaves no gaps or holes uncharted and no objects missed - surveying at high speed, leaving no gaps in the survey or with WC data, these extra detections give the user
KONGSBERG has developed it's echo sounders to suit even in poor weather conditions. lost targets. valuable information about features in the water column,
any platform; from large surface vessels to any vessel of such as the mast of a wreck or anchor chains.
opportunity, Autonomous Underwater Vehicles (AUVs), Depth compensation High density beam processing
Remotely Operated Vehicles (ROVs), Remote Surface All beams are compensated in real-time for heave, roll, yaw In high density mode more than one detection is derived Seafloor Information System (SIS)
Vehicles (RSVs) and Autonomous Surface Vehicles (ASVs). and pitch movement of the vessel. This feature enables the independently from each beam. This is achieved by using SIS is the standard software package for the EM
All EM® multibeam systems have a set of unique features system to measure and log the correct depth. more information from the phase detection curve resulting multibeam echo sounders. The software includes an
which are vital to meet the requirements conditions in a much higher resolution. The footprint is reduced to extensive set of graphical displays for data quality control,
set by the IHO S-44, the more demanding LINZ and Near field focusing less than 30% in the outer beams. all necessary operator controls for setting up and running
other specifications set by the survey industry. These The system applies beam focusing to both transmit and the system, data logging and system testing, as well as
requirements are met in any weather conditions. receive beams in order to obtain the maximum resolution system calibration and other required tools. SIS supports
inside the acoustic near field. During transmission, focusing online, real-time data cleaning to improve the overall
Sector transmission and real-time stabilisation is applied individually to each transmit sector to retain the survey efficiency.
In order to maximise the range capability and to suppress angular resolution and during reception dynamic focusing is
interference from multiples of strong bottom echoes, the applied to all receive beams.
2040C 2040C
2040P 2040P 2040C 2040C
2040M 2040M 2040C 2040C 2040P 2040P
2040 2040 2040C 2040C 2040P 2040P 2040M 2040M
712 712 2040C 2040C 2040P 2040P 2040M 2040M 2040 2040
302 302 2040P 2040P 2040M 2040M 2040 2040 712 712
122 122 2040C 2040M
2040C 2040M 2040 2040 712 712 302 302
2040C 2040C
2040P 2040
2040P 2040 712 712 302 302 122 122
2040C 50 m 2040C 2040P
200 m 2040P
2040M
500 m 712
2040M
550 m 712m
600 302 3600302
m 122 122
7000 m 11000 m
2040P 2040P2040M 2040M
2040 302
2040 302 122 122
2040M 2040M2040 2040
712 712
122 122
2040 2040 712 712
302 302
712 712 302 302
122 122
302 302 122 122
122 122
6 7
WORKING IN SHALLOW WATERS EM® 2040 EM® 2040P EM® 2040C
A good knowledge of shallow water bathymetry is needed The EM 2040 is a flexible multibeam echo sounder for very The EM 2040P is a highly portable, shallow water The EM 2040C is a compact version of the EM 2040
to manage navigation channels, ports, harbours, lakes and high resolution bathymetry. It surpasses even the strictest multibeam echo sounder based on EM 2040 technology. system, designed for compactness and to provide a
dams. It is also essential to archaeological and construction requirements set by the survey industry. It is a very Designed for easy transport and quick deployment on portable solution for shallow water applications.
surveys, cable landfalls and hydrodynamic modelling. high resolution wide-band system for any shallow water any vessel of opportunity, the system offers survey The system has an operating range of 0.5 to 500m. The
application. It can be fixed or temporarily hull mounted, performance up to and exceeding the IHO-S44 special frequency range is from 200 - 400 kHz in 10 kHz, user
Multibeam echo sounder systems must be able to operate over the bow or side mounted and integrated on ROV, order and the more stringent LINZ specification. As such, selectable steps.
on shallow draft vessels, be easy to deploy, easy to use AUVs and ASVs. it is an ideal for any application, from high resolution
and produce clean data to provide accurate results quickly. mapping and inspection to shallow water surveys. In shallow waters an extra sonar head can be added
Kongsberg Maritime delivers integrated systems for For shallow water applications an extra RX (receiver for increased swath performance and will increase the
topographic and bathymetric measurement. transducer) can be added for increased swath coverage, The operating frequency range for the EM 2040P is from coverage up to 10 times the water depth. A single head will
giving a dual RX configuration. This will increase the 200 to 400 kHz. This allows a great deal of choice when typically cover 4.3 times the water depth. In very shallow
Our systems can include multibeam bathymetry for coverage to up to 10 times the water depth, while with a selecting the best frequency for the application; 300 kHz waters, a swath width of up to 14-15 times the water
mapping the seabed and subsea structures and a marine single RX the coverage will typically be 5.5 times the water for near bottom, 200 kHz for deeper waters, and 400 kHz depth has been achieved under favourable conditions
laser scanner for mapping shorelines. depth. In very shallow waters, a swath width of up to 14-15 for very high resolution inspection. (noise and seabed dependent).
times the water depth has been achieved under favourable
Third party software integration conditions (noise and seabed dependent). Due to the large operating bandwidth available the system The transmitter and receiver are integrated in a common
The EM 2040, EM 2040P and EM 2040C can be By utilising the much longer FM Chirp pulses, the has an output sample rate of more than 60 kHz, this allows sonar head that has the same dimensions as the EM
integrated with third party topside software such as maximum depth capability is 600m with a maximum swath the system to operate effectively with very short pulse 3002. These small heads are suited to permanent or
HYPACK®, EIVA®, QINSy®, Triton® and MB-Systems. coverage of up to 850m. lengths. By utilising both CW and FM chirp pulses, the portable deployment on the hull or over the bow or ideal
Through third party software, the system can be system can achieve a much longer range capability whilst for installation temporary on very small boats or vessel of
easily integrated with third party laser scanners and The bandwidth used by the system ranges from 200 to maintaining high resolution. Due to a highly sophisticated opportunity or ASV.
other sensors. Subsequently, our delivery can include a 400kHz which allows it to operate effectively with very beam-former, the system produces the cleanest real-time
multibeam for mapping the seabed and subsea structure short pulse lengths down to 25 ms. With the sampling rate data of any multibeam available today; almost no data The transducers are depth rated down to 50m, but a
and a marine laser scanner for mapping of shorelines, quay matching the pulse length, the accuracy can be expected processing is necessary. pressure-rated sonar head for 1500m is available for
walls, bridges and other constructions. to be better than 10mm (ct/4). installation on ROVs and AUVs.
The EM 2040P can also be delivered with dual swath
Extra Detection The system can be delivered with different transducer capability giving a sufficient sounding density along track
A new feature available on all systems that use EM 2040 sizes for different resolutions, either as an 0.7 x 0.7 (TX x at a high vessel speed. This allows faster, more efficient
technology is Extra Detection. This enables the user to RX) degree system or for maximum resolution as an 0.4 x and cost reduced operations.
identify, classify and map objects above the seafloor and in 0.7 degree system. The transducers are depth rated down
the water column, i.e the shallowest point on a shipwreck. to 6000m as standard. The system comes with a new, small and portable
splashproof Processing Unit.
EM 2040 using QINSy and RIGL laser at EM 2040P results - From top left clockwise: 1. Bay Wreckage,
Vooraanzicht Ijmuiden. Image courtesy of 2. Harbour Survey, 3. River bay, 4. Finding the Loch Ness
GeoPlus Holland and QPS. Monster. Images 1, 2 & 3 courtesy of SHOM, France
8 9
GEOSWATH PLUS data and bathymetry information to compute calibrated M3® MULTIMODE MULTIBEAM SONAR The M3’s innovative design solves this technical challenge
KONGSBERG GeoSwath Plus systems acquire wide swath backscatter values, which allow reliable interpretation and Kongsberg Mesotech’s proven M3 MultiMode Multibeam by using two sets of complementary transducers in the
bathymetry and high resolution side scan data classification of seabed types. Sonar is the only instrument in its price range that same head. The M3 generates both imaging and swath
simultaneously. The use of phase measuring bathymetric The system can be deployed on dedicated survey vessels produces high-quality imaging records and 3D bathymetric data in the same head. Point it down for bathymetric
sonar technology yields wide sea floor coverage, making and vessels of opportunity in over-the-side, bow, moon datasets using the same sonar head. measurement; point it forward with a slight downward
GeoSwath Plus a highly productive survey tool for shallow pool or hull mounted configurations. tilt for sea floor imaging; point it forward for obstacle
water environments. Bathymetric multibeams have different requirements than avoidance, point it sideways for structural inspection or
GeoSwath Plus Compact: A portable solution imaging sonars. A bathymetric multibeam sonar needs a vessel hull inspection.
Depth information is limited only by the strength of the GeoSwath Plus Compact is the portable system solution wide opening angle across track, and narrow beam along
signal that is backscattered from the sea floor, enabling specifically designed for small craft operation. It consists of track angle. The M3 system can be used for a wide range of
swath coverage of up to 12 times the water depth. a compact lightweight dual transducer head and a water applications such as shallow water surveying, pipeline
The co-registered and geo-referenced side scan data can protected compact deck unit supplied by 24 VDC. The A forward-looking imaging sonar needs a wide beam profiling surveying, dredging monitoring and verification,
be normalised and classified using the GeoTexture system is operated via a rugged laptop computer. across track and wide beam along track. This is why engineering inspection of small ports and harbours and
software package. It makes use of beam pattern, motion it’s impossible for a conventional bathymetric sonar to outflow and cooling water intake inspections of dams,
function well as a forward-looking imaging sonar. bridges and piers.
GeoSwath Plus (500 kHz) data imaging ripples from a M3 Sonar - Bathymetric Capture, Maqtacquac Headpond
river survey. Image by the Canadian Hydrographic Service. Survey. Image courtesy of UNB-Ocean Mapping Group.
10 11
WORKING IN MEDIUM TO DEEP WATERS
EM® 712
EM 712 is the next generation, high to very high resolution The system configuration can be tailored to the user
multibeam echo sounder system for shallow to medium requirements, allowing for beam widths from 0.25x0.5
water depths and takes the technology to the next level. degrees to 2x2 degrees and a selection of different
The EM 712 has a much greater range and swath coverage models; a full performance version which utilises both FM
and includes more features than the standard EM 710. The Chirp and CW pulses, a shallow version which utilises CW
EM 712 introduces a 0.5 x 0.5 beam opening angle to the pulses only, and a reduced depth version. Both the shallow
market - a world first. and the reduced depth versions can be easily upgraded to
full performance.
The EM 712 has a bandwidth from 40kHz to 100kHz,
and due to the new receiver transducer technology and
new low-noise electronics, the acquisition depth has
been increased to more than 3500m with an across track
coverage up to 5.5 x the water depth. This enables a
maximum coverage of close to 4200m (dependent upon
the size of the arrays).
14 15
MARITIME BROADBAND RADIO (MBR) REMOTE SERVICES
Operating as a maritime ‘Information Highway’, Maritime More efficient data acquisition is made possible with K-Remote uses online systems and health monitoring to Online service for instant analysis and assistance:
Broadband Radio (MBR) connects crews and their vessels the main vessel receiving data streams from a launcher provide KONGSBERG customer support with remote • operational support and guidance
using a high speed, high capacity digital communication utilising MBR. The hydrographer can operate several access to ensure reliability. • inspection of on-board systems and interfaces
channel with ‘Fast Track’ priority options. launchers to secure optimum survey result. • preparation and investigation prior to service visits
The global network solution consists of two groups • remote update of on-board systems.
Optimised to securely carry a diverse array of operational MBR allows for bi-directional connectivity between assets of devices, communication hubs and node network • remote commissioning
information spanning from real-time video streams to with the utilisation of IP technology. The use of end-to-end devices. All network traffic between network devices
systems data, MBR enables remotely situated teams to IP connectivity provides cost efficient integration and an are encrypted. Any IP-based communication link can be
work together seamlessly, co-ordinating systems and interoperable solution for seamless data exchange. utilised as a communication carrier.
activities for optimal performance, safety and operational
success. The novel antenna design represents a breakthrough
in wireless data exchange, with unsurpassed capability
Information from several sensors on separate vessels to transfer data in even heavily obstructed areas. The
can be shared in real time, allowing the operators to consistent dataflow maximises efficiency in applications
communicate and make decisions based on a common and operations, and minimises the risk of interruption or
operational understanding. delay of operations due to lack of communication.
16 17
SCANNING SONARS Side scan sonar
Side scan sonars make it possible to efficiently search
Combined systems
Side scan sonar is available for the EA440 and EA440 SP
large areas. Our systems provide high resolution images hydrographic echo sounders. These combined systems are
of the seafloor that are ideal for mapping shipping ideal for surveying shallow water areas such as harbours,
hazards, detecting debris, search and recovery operations, or for fixing the geographic location of detected objects.
monitoring underwater structures, archaeological research
and mine counter measure activities. The side scan sonar is available in a single and dual
Scanning sonar for underwater inspection build-up around bridge piers is potentially one of the transducer configuration. The system can be fixed
Underwater inspection of man-made structures is vital most dangerous conditions the inspection diver faces; PulSAR mounted in the hull or over-the-side and can easily
as they age. In addition, water currents, corrosion, and It introduces the possibility of entanglement, and even PulSAR acquires high resolution acoustic images of the installed on any vessel of opportunity. A vessel installation
damage from storms and vessels may impact structure worse, diver entrapment if the debris moves. seabed. The system is deployed on a rugged towfish eliminates the need for a towing sidescan.
integrity. in order to get closer to the seafloor and ensure the
KONGSBERG's range of high resolution imaging and grazing angles needed to achieve high quality data. A One or several vertical channels can be used for normal
Diving inspections are often challenged by high current, profiling sonar heads continues its leadership in visualising water protected deck unit with in-build GPS and a small, echo sounding in addition to a dual sidescan.
deep water, lack of visibility and debris accumulation underwater structures (such as bridges, docks, piers cable hand reel allow operation from small open vessels.
around the structure. In addition to preventing the and dams, etc.) and is used in a multitude of underwater Large areas can be surveyed efficiently revealing small
diver from completing a thorough inspection, debris construction and survey applications. objects and structures in great detail. The system uses
a frequency range of 550kHz to 1MHz. Within this
bandwidth source signals, both FM and CW, can be
selected in order to optimise the range and resolution for
the given survey task.
18 19
SYNTHETIC APERTURE SONAR HISAS 1032 sonar image of a shipwreck filled with
chemical munitions, sunk after WW2. Area shown
200 x 100m. Depth is encoded as hue (from 642
m red to 647 m blue), echo strength encoded as
brightness. Copyright Norwegian Defence Research
Establishment (FFI).
HISAS® 1032 is a High Resolution Interferometric As the height map is generated at near image resolution,
Synthetic Aperture Sonar system capable of providing it is possible to generate bathymetric estimates both at
very high resolution images and detailed bathymetry of the side scan and full synthetic aperture sonar resolution. This
seabed. allows rapid collection of large swathes of bathymetric
information at low processing cost, while simultaneously
The system was originally developed for demanding providing extremely detailed bathymetric imagery for
military mine countermeasure operations, where there is a selected regions.
need to detect and classify small objects on the sea floor
in a challenging, clutter filled environment. By merging HISAS 1032 side scan bathymetry with data
The sonar is installed on board HUGIN, a medium size AUV from the EM 2040 multibeam echo sounder, a single swath
in Kongsberg Maritime’s family of AUVs. of up to 20 times the altitude of the AUV above the sea
floor can be generated. Kongsberg Maritime develops and
HISAS has a range-independent resolution of manufactures the AUV, the aided inertial navigation system
approximately 3 x 3 cm out to a distance of more than 200 and the synthetic aperture sonar in-house. The result is
m from both sides of the AUV at a speed of 2 m/s, which smooth system integration, optimal performance and high
allows for detection and correct classification of mines quality data.
and other small objects. It has a typical area coverage rate
better than 2 km/hr.
Below left: Coral and sand, collected in April 2011 near the
Great Barrier Reef, Australia
Below: Norwegian tanker 'Holmengraa', sunk off the coast
of Horten 28 December 1944 under an allied air-raid. Data
collected 2012, imagery courtesy of FFI
20 21
SUB BOTTOM PROFILERS The end result is a 3D displays of sub-bottom sediments.
All beams can be take into account the bottom slope.
GeoPulse Plus - Digital technology
GeoPulse Plus is Kongsberg Maritime’s high resolution
digital sub-bottom profiler. Depending on the survey task,
The transmit waveform is a linear FM chirp ranging from the source signal used can vary within the frequency
2.5kHz to 7 kHz, providing a maximum vertical resolution band 1.5kHz to 18kHz. This allows for optimal resolution
of approximately 0.3ms In addition, the system can use and sub-sea floor penetration whether it is used for
other pulses like CW, hyperbolic chirp and Ricker. mapping deep ocean geology, or determining the mud
Our sub bottom profiler systems (SBP) are ideal for Sub-Bottom Profilers identify, characterise and measure thickness in a silted harbour. Other options include the CW
identifying and characterising layers of sediment or rock layers of sediment or rock under the sea floor. A high constant ping rate can be maintained even in deep pinger waveform or FM chirp signals. The system can be
under the sea floor, going beyond the capabilities of waters via a multi-pulse operating mode. The system can deployed on the hull of dedicated survey vessels, towed to
standard echo sounders. They are commonly used for Both SBP systems have electronic roll, pitch and heave be synchronised with the EM 122 or EM 302 multibeam bring it closer to the target in deep waters or as a portable
geological surveys, dredging operations and locating stabilised beams. The systems have significantly reduced echo sounders, and is offered as a 3, 6 or 12 degree over-the-side system mounted on vessels of opportunity.
objects such as pipelines. beam widths compared to conventional sub-bottom system.
profilers. This is achieved by having one linear transmit The system is operated directly from the deck unit or
All of Kongsberg Maritime’s profilers have excellent array mounted along the vessel keel and one linear a laptop computer with an ethernet interface to the
penetration, high resolution and cover all depth ranges. hydrophone array mounted orthogonally to the keel. Using deck unit. The sonar electronics are mounted close
a large transmit array increases the source level due to the to the transducers in all deployment options, and the
Options for versatility injection of more power without any risk of cavitation. This signal is transmitted to the deck unit via a lossless digital
The SBP 120 and SBP 300 systems are commonly installed increases the directivity of the transmitter and improves connection. Data is acquired with the transmit transducers
as an extension to the EM 122 and EM 302 multibeam the suppression of acoustic noise and reduces greatly the or alternatively with a hydrophone.
echo sounder systems, and consist primarily of a separate reverberation volume.
low frequency transmitter transducer and a transceiver
cabinet. The receiving transducer of both the EM 122 The SBP makes a fan of 11 narrow beams across-track per
and the EM 302 is wide band, and can therefore also be ping inside a 30 degree sector. This multibeam capacity is
utilised by the SBP 120 and SBP 300 respectively, thus useful for finding and resolving specular returns in rough
enabling sub-bottom profiling capacity. terrain, detecting buried objects and obtaining information
about the angular response of sediments in the sea floor.
22 23
GeoChirp 3D - Higher resolution in 3D
GeoChirp 3D provides three dimensional acoustic images The acoustic source array consists of four Parametric Profilers PS 120
of shallow, sub-seabed objects. It transfers the well GeoPulse Plus transducers and 60 hydrophone arrays. The TOPAS family of sub bottom systems are parametric The PS 120 is designed to operate from 2m to over 400m,
established principles of conventional 3D reflection seismic RTK GPS positioning and heading antennas together with profilers designed for high resolution profiling and with a penetration capacity of greater than 20m with a
technology, used in hydrocarbon exploration, to high a motion reference unit (MRU) allow the determination of object detection. The systems are designed around beamwidth of 4-6 degrees.
resolution chirp sub bottom profiler technology. Typical geo-referenced source and receiver positions. the parametric end-fire antenna principle that gives a
applications include marine archaeology, pre-construction high directivity and a low frequency beam from a small All TOPAS systems can be hull mounted with electronic
and piling surveys, mine countermeasure and unexploded The data acquisition deck unit combines seismic and transducer area. roll, pitch stabilised beams, which make them an efficient
ordinance operations and marine geology and geophysics. navigation data capture in one system. It is controlled by a tool in all kinds of accurate, high resolution survey
graphical user interface suited to survey planning and data PS 18 operations.
All acoustic sources, hydrophone receivers and positioning quality control. Data is stored in SEG-Y format. Third party The PS 18 operates in water depths from about 20m to full
components are incorporated into a surface tow body. industry standard 3D seismic processing and visualisation ocean depth with a penetration capacity of greater than They can optionally perform sequential beam scanning
This rigid frame can be deployed from small vessels. software can be offered as part of the survey package. 200m and a beamwidth of 4.5 degrees. over a sector of up to 90 degrees generating a sub-bottom
swath for building 3D displays of sub-bottom sediments.
PS 40
The PS 40 is designed to operate from less than 5m to
over 1000m, with a penetration capacity of more than 75m
with a beamwidth of 3-5 degrees.
24 25
SINGLEBEAM ECHO SOUNDERS Deep water applications
The EA600 is the standard system for research, seismic
Multi channel systems
The EA MCU is a hydrographic sweep system specifically
and other vessels requiring full ocean depth capability. designed for use in channels, rivers and other shallow
It is easy to install and it supports up to four channels. bodies of water. Its precise depth and bottom detection
Each channel can be selected among a preset list of capabilities provide consistent and accurate data over an
frequencies, ranging from 10 kHz to 710 kHz. In deep entire sweep.
water application the EA 600 can send multiple pulses at The system readily detects obstacles and objects on the
Singlebeam echo sounders are used on a wide range of A variety of highly efficient transducers are available to suit the same time to maintain a high ping rate. The system bottom. Its very high ping rate ensures that it finds very
vessels, providing amongst other applications water depth all operational needs, from extreme shallow (0.2m) down also have a pinger mode for accurate depth tracking of small objects, even when they are covered by sediments.
information for navigation and surveying. to 3000m water depths, as well as side-scan applications. acoustic pingers. Both the depth and bottom profile can be monitored
Low frequency transducers, typically 10 and 15kHz may be simultaneously using a standard echogram and a waterfall
Kongsberg Maritime’s EA series is the most supplied for sub-bottom light but with a maximum depth display. The system comes with a user friendly topside
comprehensive and high performance range of range of 300m. software.
hydrographic echo sounders on the market. They can be
adapted for any application and are available as single or Each wide band transceiver has up to four channels, and
multiple frequency units ranging from 10 kHz to 500 kHz. several units can be controlled from the same operating
All channels are independently controlled but have software. The EA440 system has a dynamic range of 160
simultaneous transmission. dB with a non-saturating receiver, allowing the time varied
gain to be applied in the software.
The new EA series offers a completely new and intuitive
operator software. In addition to raw data storage, the In addition to displaying vertical depth, a common option
system can store XYZ, SEG-Y, and XTF echogram data as is to add two 500kHz side scan transducers and a 15kHz
bitmap and annotation. The raw data can be used to replay frequency transducer for sub-bottom profiling.
and generate additional data. Several software packages from third party vendors can
be used simultaneously.
Shallow water applications The system can be powered from a 12 - 15V power source
The EA440 is a new single beam system based on or from the mains.
wideband technology with operating frequencies from 30
kHz up to 500 kHz, with a range limited low frequency The system can also be delivered as a portable, splash
option. By utilising FM chirp the system has an increased proof version - the EA440 SP.
range performance without sacrificing resolution.
26 27
INTEGRATED SOLUTIONS POSITION REFERENCE SYSTEMS
ECOSYSTEM MONITORING
AND SEABED SENSORS
MARINE ROBOTICS
28 29
TECHNICAL SPECIFICATIONS
DUAL HEAD
SINGLE RX
EM® 2040C
EM® 2040C
EM® 2040P
EM® 2040
EM® 2040
DUAL RX
SYSTEM
EM® 712
EM® 302
EM® 122
Linear CW,
OPERATING PRINCIPLE Parametric Linear Linear CW
Chirp
M3
FREQUENCY RANGE (kHz) 0.5 - 6 1 - 10 2 - 30 2.5 - 6.5 2 - 12 1.5 - 18
OPERATING
200 - 400 40 - 100 30 12 500 DEPTH RANGE (m) 10 - 11000 5 - 2000 2 - 400 10 - 11000 5 - 3000* 5 - 4000*
FREQUENCY (kHz)
MAX VERTICAL RESOLUTION (m) 0.2 0.1 0.04 0.25 0.1 0.06
DEPTH RANGE (m) 0.5 - 600 0.5 - 490 0.5 - 510 3 - 3600 10 - 7000 50 - 11000 0.2 - 50
MAX PENETRATION (m)
Note: dependent on substrate
200 80 50 200 80 80
>800 m >850 m 500 m >550 m >800m 4200 m >8 m >35 m 175 m
140° 200° 130° 200° 140° Hull with
MAX COVERAGE INSTALLATION Hull Hull / over the side Hull / over the side / towed
(gravel)
5.5 x 10 x 4x 10 x 5.5 x 140° 143° 150° 120° EM® 122/302
water water water water water 5.5 x water 5.5 x water 6 x water 3.5 x water
depth depth depth depth depth depth depth depth depth
*Dependent on the number of transducers in the array
TX: 0.4, 0.7 TX: 1.0 TX: 0.25, 0.5, 1, 2 TX: 0,5, 1, 2, 4 TX: 0,5, 1, 2 TX: 3.0
BEAM WIDTHS
(degrees)
RX: 0.7 RX: 1.0 RX: 0.5, 1, 2 RX: 1, 2, 4 RX: 1, 2, 4 RX: 1.6
SYSTEM ACCURACY
(better than)
10 mm 0.2 % x water depth 10 mm
SIDE SCAN SONAR
MAX NO. OF
Up to Up to Up to Up to Up to
SOUNDINGS PER Up to 1600 Up to 864 Up to 256
PING
800 1600 800 1600 800 SYSTEM EA440 side scan PulSAR HiSAS 1032
MAX NO. OF SOUNDINGS PER PING > 5000 raw data points
PULSE FORM CW
TRANSDUCER 4000 m
30 31
LIFE CYCLE SUPPORT GLOBAL SUPPORT 24/7
We are always there, wherever you need us As part of our commitment to total customer satisfaction,
Designed to purpose – maintained to last Evergreen
KONGSBERG customer services organisation is designed we offer a wide variety of services to meet individual
Our life cycle management service will assist our We offer continuous hardware and software upgrade to
to provide high-quality, global support, whenever and customers’ operational needs. KONGSBERG support 24
customers throughout all the phases, from design to keep your vessel at maximum efficiency. Our system is
wherever it is needed. We are committed to providing is a solution designed to give round-the-clock support.
commissioning and during the operational life time. designed with consistent boundaries between individual
easy access to support and service, and to responding For mission-critical operations, KONGSBERG support 24
systems and control segments. This design strategy makes
promptly to your needs. Support and service activities are can be extended to include remote monitoring.
Solid in-house competence, both in system design and it easy to add new functionality or complete new control
supervised from our headquarters in Norway, with service We can adapt the level of support needs by offering
user competence enables us to provide solutions that are segments thus enable us to offer up-grades step by step
and support centres at strategic locations around the service agreements, on-site spare part stocks and quick
fit to purpose and thus yields efficiency in operation. to keep your system evergreen.
globe – where you are and the action is. on-site response arrangements.
Our common base technology provides robust designs,
with few and reliable parts, an excellent foundation to Training
maximize the output at competitive costs. Qualified personnel are one of your major assets in efficient
and safe operations. Thus, we offer modular training
The distributed and open system design employs an courses for all major subjects – from operator training to Svalbard
industry standard communication network. Standard technical training that keeps your crew fit on the job.
hardware components used for various applications and
the open network approach results in:
• Increased reliability
• Competitive life-cycle support
• Easy up-grade solutions
Norway (35) Finland
Russia
Canada (5) UK (11) Denmark
Ireland Poland (2)
Germany
Netherlands Hungary
France
USA (14)
Spain Italy (2)
Greece South Korea (6)
UAE (3) China (4)
Venezuela Nigeria
Malaysia
PLANNING & DESIGN PROJECT ENGINEERING INSTALLATION & OPERATION & MODERNISATION Singapore (4)
& DEVELOPMENT COMMISSIONING MAINTENANCE Brazil (3)
On-line support »
Australia (2)
Technical support » South Africa
Technical consulting »
32 33
Noise-reducing stereo headphones 1
IP68 water-resistant
connectors : Removable hand strap
Colour-coded connection
Telescopic pole
Microphone/Loudspeaker
Articulated water-resistant
camera head supplied with
removable plugs allowing
camera to be waterproof
Lighting with 8 levels up to 2m
of intensity
34
THE ADVANTAGES THAT MAKE THE DIFFERENCE
AN ERGONOMIC CONTROL BOX :
uu Lightweight and compact
uu Extra-wide colour screen
uu High brightness screen for viewing in full daylight
uu Menu and intuitive navigation
uu Run time: 2.5 hours
uu Easily replaceable lightweight compact rechargeable battery.
uu Battery compatible with LEADER Search, LEADER Hasty and LEADER Scan control boxes.
uu Backup pack for 10 AAA batteries (not supplied). Makes the device functional even if the
battery cannot be charged during rescue operation.
A MULTIFUNCTION DEVICE :
FUNCTIONS IN SEARCH CAMERA MODE
360°
260°
AVAILABLE VERSIONS
1 control box 1 control box 1 control box
1 control box 1 control box +1 articulated +1 articulated +1 water-resistant
Contents of case
+1 pole (2.4m) +1 pole (4m) camera camera camera
on 90m reel on 180m reel on 90m reel
36
SEARCH CAMERA CHARACTERISTICS
CAMERA HEAD
Diameter 47 mm for entering standard 51 mm core holes
Camera articulation 170° (85° to right and 85° to left)
Field of view 260° in total
Type of articulation Rotation by electric motor
Camera articulation control From control box
Water resistance Yes, to 2 m when plug fitted to camera unit (waterproof mode)
Lighting type 8 LEDs with 8 levels of illumination.
Microphone/loudspeaker Integrated into camera head for half-duplex communication with victim
Response frequency 300 Hz to 3500 Hz
Weight 1.4 kg 2 kg
Removable pistol grip Yes
Yes, intended location at the back of the control box to
Pole/control box
fix an "articulated arm" which will allow the user to link
mounting system
the control box at the pole.
POWER SUPPLY
CONTROL BOX BATTERY CHARGER + TRANSFORMER
Dimensions L 6.5 x W 13 x H 3 cm Charger dimensions H 10.5 x W 4.5 x L 3.5 cm
Weight 280 g Charger weight 200 g
Type 4 Lithium Ion Polymer cells. 37 Wh Charger input voltage 100 - 240 VAC / 50-60 Hz
Capacity 2500 mA/hour International connection adaptors Yes: UK, EU, AUS, USA
Run time 2 hours 30 min
Charging time 3 hours 30 min
SPARE BATTERY PACK
Recharging cycles 500
Dimensions L 6.5 x W 13 x H 3 cm
Charging temperature 0° to +45°C
Weight with 10 batteries (not supplied) 300 g
Water and dust resistance IP54
Type and number of batteries required 10 x AAA-LR03 lithium batteries
Battery compatible and inter- Yes with LEADER Search, LEADER Scan
Approx. 1 h 30 m depending on the
changeable and LEADER Hasty Run time
standard cell batteries brand
Continuously displayed on control box
Charge level indication
screen
Articulated water-resistant
camera head supplied with Up to 3 wireless
Wireless connection
removable plugs allowing seismic sensors
camera to be waterproof
up to 2 m
INCLUDED ACCESSORIES :
38
22
THE ADVANTAGES THAT MAKE THE DIFFERENCE
AN ERGONOMIC CONTROL BOX :
uu Compact and lightweight uu Battery compatible with LEADER Search, LEADER Cam and
uu Extra-wide colour screen LEADER Scan control boxes.
uu High brightness screen for viewing in full daylight uu Backup pack for 10 AAA batteries (not supplied). Makes the device
uu Intuitive navigation interface and menu functional even if the battery cannot be charged during rescue
uu Run time: 2.5 hours operation.
uu Easily replaceable lightweight compact rechargeable battery.
A MULTIFUNCTION DEVICE :
IN SEARCH CAMERA IN SEISMIC SEARCH
FUNCTIONS
MODE MODE
AVAILABLE VERSIONS
1 control box + 1 control box + 1 control box + 1 control box + 1 control box + 1 control box +
Contents of case 1 sensor + 2 sensors + 3 sensors + 1 sensor + 2 sensors + 3 sensors +
1 pole (2.4m) 1 pole (2.4m) 1 pole (2.4m) 1 pole (4m) 1 pole (4m) 1 pole (4m)
TRANSPORT CASE
Startup time < 1 minute
Keyboard Phosphorescent
3 metal ports for connecting headphones, camera and TRANSPORT CASE
Connections
antenna Rigid impact-resistant
Material
Memory card Slot for micro SD card for recording photos and videos polypropylene shell
Software updating By specific LEADER USB stick Integral pressure equalising
Suitable for air transport
Operating temperatures From -10° to +60°C valve
Antenna for interconnection of seismic Removable and articulated for a range of up to 100m in Empty weight 7.80 kg
sensors with seismic sensors in unobstructed space Loaded case weight 16 kg
Yes, intended position on back of control box for attaching Water and dust resistance IP67
Control unit/pole mounting system
the supplied articulated arm to connect control unit to pole Number of wheels 2
40
SEARCH CAMERA CHARACTERISTICS
POLE CAMERA UNIT
2.4 m version 4 m version 47 mm for entering standard 51 mm
Diameter
Material Carbon fiber core holes
Retracted: 1.10 m Retracted: 1.10 m Camera articulation 170° (85° to right and 85° to left)
Dimensions
Extended: 2.40 m Extended: 4 m Field of view 260° in total
Weight 1.4 kg 2 kg Type of articulation Rotation by electric motor
Detachable grip Yes Camera articulation control From control box
Yes, intended position on top of pole for attaching the Yes, to 2 m when plug fitted to camera
Pole/control box Water resistance
supplied articulated arm to connect the control unit and unit (Waterproof mode)
mounting system
pole together Lighting type 8 LEDs with 8 levels of illumination.
Integrated into camera for half-duplex
CAMERA Microphone/loudspeaker
communication with victim
Type of optics Lens
Response frequency 300 Hz to 3500 Hz
Lens Scratch-proof sapphire
Focal length F = 3mm fixed
Opening 90°
POWER SUPPLY
CONTROL BOX BATTERY CHARGER + TRANSFORMER
Dimensions L 6.5 x H 13 x W 3 cm Charger dimensions H 10.5 x W 4.5 x L3.5 cm
Weight 280 g Charger weight 200 g
Type 4 Lithium Ion Polymer cells. 37 Wh Charger input voltage 100 - 240 VAC / 50-60 Hz
Capacity 2500 mA/hour International connection adaptors Yes: UK, EU, AUS, USA
Run time 2 hours 30 min
SPARE BATTERY PACK
Charging time 3 hours 30 min
Dimensions L 6.5 x H 13 x W 3 cm
Recharging cycles 500
Weight with 10 batteries (not supplied) 300 g
Charging temperature 0° to +45°C
Type and number of batteries required 10 x AAA-LR03 lithium batteries
Water and dust resistance IP54
Approx. 1 h 30 m depending on
Battery compatible and inter- Yes with LEADER Search, LEADER Cam and Run time
standard cell batteries brand
changeable LEADER Scan
Charge level indication Displayed on control box screen WIRELESS SENSORS POWER SUPPLY
Type and number of batteries required 3 x AAA - LR03 alkaline batteries
Approx. 8 hrs depending of
Run time
the standard cell batteries brand
Antenna
with 30 m range
Easily interchangeable
sensor battery
ULTRA-SENSITIVE UWB
MOVEMENT SENSOR
KEY POINTS
uu Compact and lightweight uu Intuitive navigation interface
uu Detects movement from up to 30 m away in open field uu Ability to save data during search
uu Detects breathing from up to 10 m away uu Battery indicator visible outside of sensor
uu Real-time movement detection uu Easily interchangeable battery
uu Wireless or wired connection
INCLUDED ACCESSORIES :
42
THE ADVANTAGES THAT MAKE THE DIFFERENCE
AN ERGONOMIC CONTROL BOX :
uu Compact and lightweight uu Battery compatible with LEADER Search, LEADER Cam and
uu Extra-wide colour screen LEADER Hasty control boxes.
uu High brightness screen for viewing in full daylight uu Back up pack for 10 AAA batteries (not supplied). Makes
uu Menu and intuitive navigation the device functional even if the battery cannot be charged
uu Run time: 2.5 hours with one battery during rescue operation.
uu Quickly replaceable lightweight compact rechargeable
battery.
A MULTIFUNCTION DEVICE :
The control box screen indicates the
FUNCTION IN UWB SEARCH MODE
depth at which the victim is located and
gives visual indications on his or her GENERAL FUNCTIONS
movements : Screen brightness adjustment Yes
uu Displays small or large movements Left- and right-handed use Yes
(respiratory movements or movements
Indication of charge of control box battery Yes
of a finger, for example)
Choice of connection to the control box (USB or Wi-Fi) Yes
uu Displays frequency of movement
(suggesting whether human life or not) Indication of status of connection of control box to sensor
Yes
(starting, ready to be connected, connected, not connected, error)
Data recorded (useful for examining search history, re-examining
Yes
data or during training)
2 SEARCH MODES :
AUTOMATIC search mode for rapid deployment. The apparatus
automatically analyses several predefined areas and coud detect
up to 10 alive persons. If distance set up from 0 to 30m, it will Yes
search for 1 person (biggest movement) each 3 meters: 0-3,
3-6…27-30.
MANUAL search mode defined by user with selection of search
Yes
area (Choice of minimum and maximum depth of search area)
FUNCTIONS AVAILABLE IN SEARCH MODE
Set minimum search depth (start) Yes
Set maximum search depth (end) Yes
Large or small movement indicator Yes
OSCILLOGRAM FUNCTION
An arrow is placed at the depth where movement is detected.
This enables the operator to :
uu Confirm the presence of movements in the selected search
area. (If it detects several movements it will concentrate Yes
on the strongest movement)
uu Display the frequency of the detected movement.
SCREEN
Type TFT LCD
Resolution 7’’ - 800 x 480 px WVGA
Brightness 1000 candela/m2
Backlighting LED
Colours 16-bit RGB
Transparent thermoplastic: 3 mm colourless scratch-resistant
Protection
PMMA
44
UWB SEARCH EQUIPMENT CHARACTERISTICS
UWB SENSOR
Material Sensor contained in a waterproof and shockproof orange ABS case
Technology UWB: Ultra Wide Band
Search distance Up to 30 m in open air
Accuracy Approx. 1 m
- Wi-Fi connection to control unit with more than 30 m range. Eliminates cable management problems
Type of connection to control unit
- Waterproof USB connection with 5 m of cable: Alternative in case of nearby interference preventing Wi-Fi use
Dimensions with antenna L 43 x W 24.4 x H 34.1 cm
Weight (including battery) 6.7 kg
POWER SUPPLY
CONTROL BOX BATTERY UWB SENSOR BATTERY
Dimensions L 6.5 x W 13 x H 3 cm Dimensions L 9.7 x W 14.6 x H 3.8 cm
Weight 280 g Weight 621 g
Type 4 Lithium Ion Polymer cells (Wh) Type Li-Ion Endura CUE - D75
Capacity 2500 mA.h Capacity 4.9A / 59W
Run time 5 hours Run time 5 hours
Charging time 3.5 hours Charging time 4 hours
Recharging cycles 500 Recharging cycles 500
Charging temperature 0° to +45°C Charging temperature 0 to 40°C
Water and dust resistance IP54 Charge level indication Visible on outside of sensor
Battery compatible and Yes with LEADER Search, LEADER Cam and
interchangeable LEADER Hasty CHARGER + TRANSFORMER FOR UWB SENSOR
Charge level indication Displayed on control box screen Charger dimensions H 8.3 x D 14.2 x L 2.8 cm
Charger weight 360 g
CHARGER + TRANSFORMER FOR CONTROL BOX Charger input voltage 100 - 240 VAC / 50-60 Hz
Charger dimensions H 10.5 x D 4.5 x L 3.5 cm International connection adaptors Yes: UK, EU, AUS, USA
Charger weight 200 g
Charger input voltage 100 - 240 VAC / 50-60 Hz
International connection adaptors Yes: UK, EU, AUS, USA
Up to 3 wired
Noise-reducing stereo headphones 1 seismic sensors
with 8 m of cable each
Communication probe
included in the complete version
(3 wired + 3 wireless sensors)
(optional in other versions)
Wireless connection
INCLUDED ACCESSORIES:
46
THE ADVANTAGES THAT MAKE THE DIFFERENCE
AN ERGONOMIC CONTROL BOX :
uu Lightweight uu Easily replaceable lightweight compact rechargeable battery.
uu Compact uu Battery compatible with LEADER Hasty, LEADER Cam and LEADER
uu Extra-wide colour screen Scan control boxes.
uu High brightness screen for viewing in full daylight uu Backup pack for 10 AAA batteries (not supplied). Makes the device
uu Menu and intuitive navigation. functional even if the battery cannot be charged during rescue
uu Run time: 5 hours operation.
A MULTIFUNCTION DEVICE :
FUNCTION* IN SEISMIC SEARCH MODE
Mono or Stereo listening mode* (selected sensors heard in one or both ears) Yes
*Usable simultaneously
AVAILABLE VERSIONS
1 control box +
1 control box + 1 control box + 1 control box + 1 control box +
Contents of case 3 wired sensors +
2 wired sensors 3 wired sensors 2 wireless sensors 3 wireless sensors
3 wireless sensors
SCREEN
Type TFT LCD
Resolution 5’’ - 800 x 480 px WVGA
Brightness 1000 candela /m2
Backlighting LED
Colours 16-bit RGB
Protection Transparent thermoplastic: 3 mm colourless scratch-resistant PMMA
48
SEISMIC SEARCH EQUIPMENT CHARACTERISTICS
SEISMIC SENSORS
Wireless connection to control unit Wired connection to control unit
Dimensions with antenna Height 212 mm x Diameter 90 mm Height 85 mm x Diameter 90 mm
Weight (with standard cell batteries) 840 g 1400 g
Up to 3 sensors with 100 m range each in unobstructed Up to 3 sensors, each with 8 m of anti-abrasion high-viz
Specificity
space orange cable
Sensor/control box communication frequency 2.4 GHz -
Water and dust resistance IP67
Shock resistance Yes
Audio response frequency 1 Hz to 3000 Hz
Run time Approximately 8 hrs depending on battery make -
Individual control of each sensor from control box Each sensor can be listened to alone or simultaneously with the second sensor.
Low-pass filter: Removes high sounds. Adjustable from 600 to 3000 Hz
Noise-reducing filters adjustable from control box
High-pass filter: Removes deep sounds. Adjustable from 20 to 300 Hz
Mono or Stereo listening mode For listening to the selected sensors in both ears, right ear only or left ear only
Yellow trackers above each bar graph for clear reading of peaks. Red tracker identifies the highest seismic peak,
On-screen display trackers
staying on screen for an additional brief period.
POWER SUPPLY
CHARGER + TRANSFORMER CONTROL BOX BATTERY
Charger dimensions H 10.5 x W 4.5 x L 3.5 cm Dimensions L 6.5 x W 13 x H 3 cm
Charger weight 200 g Weight 280 g
Charger input voltage 100 - 240 VAC / 50-60 Hz Type 4 Lithium Ion Polymer cells. 37 Wh
International connection adaptors Yes: UK, EU, AUS, USA Capacity 2500 mA/hour
Run time 5 hours
Charging time 3 hours 30 min
SPARE BATTERY PACK
Recharging cycles 500
Dimensions L 6.5 x W 13 x H 3 cm
Charging temperature 0° to +45°C
Weight with 10 batteries (not supplied) 300 g
Water and dust resistance IP54
Type and number of batteries required 10 x AAA-LR03 lithium batteries
Battery compatible and Yes with LEADER Hasty, LEADER Cam and
Approx. 1 h 30 m depending
Run time interchangeable LEADER Scan
on battery make
Charge level indication Continuously displayed on control box screen
WIRELESS SENSORS POWER SUPPLY
Type and number of batteries required 3 x AAA - LR03 alkaline batteries
Approx. 8 hrs depending of
Run time
the standard cell batteries brand
TRANSPORT CASE
TRANSPORT CASE RESPONDER'S BACKPACK
Material Rigid impact-resistant polypropylene shell Material Polyester 1200
Suitable for air transport Integral pressure equalising valve Dimensions L 57 x W 47 x D 20 cm
Dimensions L 65 x W 51 x H 24.2 cm Empty weight 2.5 kg
Empty weight 7 kg Colour Red
Loaded case weight (maximum configuration) 25.6 kg
Water and dust resistance IP67
Protective case
Portable, lightweight and
waterproof
Telescopic Sight
To pinpoint the laser on Rigid tripod
the targeted area
Monitor screen:
- Intuitive selection of menus
- Displays distance to target
- Illustrates realtime movement on screen
- Displays measurements in either
Metric or Imperial (mm or inches)
- OLED screen for excellent clarity
50
THE ADVANTAGES THAT MAKE THE DIFFERENCE
uu Detects a 5-mm movement at a distance of 30 m. uu 2 lasers can be connected to the device to simultaneously
uu A telescopic sight allows operator to point the laser monitor 2 sides of an unstable building for the safety of
accurately at targeted unstable structure. rescue teams working around or inside the structure.
uu Multiple maximum movement thresholds (from 5 to 100 mm) uu Various modes available for distinguishing between alarms,
can be selected. When a movement is sensed that exceeds faults, etc.
the selected threshold, the sound alarm is triggered (98 dB). uu Filters out brief interruptions of beam (birds flying through
uu Continuously monitors detected movements and displays beam, people briefly crossing beam etc.)
changes on its screen for real-time awareness.
CHARACTERISTICS
Continuous T°C of use
Dim. Backup power
Model Weight operation and
LxHxD run time**
power supply storage
LEADER Sentry B1 - Ref D11.06.010
Shockproof and waterproof case (when closed) containing
console control monitor
15,5 hrs with
1 x class 2* laser with 4 m of anti-scuff high-viz orange cable 650 approx. 8 x AA lithium batteries
1 x robust tripod, height-adjustable to avoid interference with x 510 15.5 (not supplied)
site activity (1.80 m max) with 1 integral hook for attaching x 242 kg
ballast at its centre cm 7 hrs with
+ 1 ball joint for mounting the laser on the tripod. 8 x AA alkaline supplied batteries
T°C of use :
8 x AA alkaline batteries + 1 x 110/220V 50/60 Hz mains power 12V
-25°C
pack with adaptors + 1 x 12V cable with vehicule AC adaptor. vehicle
to
supply
LEADER Sentry B2 - Ref D11.06.011 +50°C
Shockproof and waterproof case (when closed) containing 2 connected lasers: 9 hrs with
or 8x AA lithium batteries (not supplied)
console control monitor T°C of
1 connected laser: 15,5 hrs with storage :
1 x class 2* laser with 4 m of anti-scuff high-viz 110/220V 8x AA lithium batteries (not supplied) -40°C
orange cable 50/60 Hz
approx. to
1 x class 2* laser with 20 m of anti-scuff high-viz orange cable 670 mains. 2 connected lasers: 3 hrs with
26.5 +70°C
2 x robust tripods, height-adjustable to avoid interference with x 510 8x AA alkaline supplied batteries
kg
site activity (1.80 m max) with 1 integral hook for attaching x 372 1 connected laser: 7 hrs with
ballast at its centre cm 8x AA alkaline supplied batteries
+ 2 ball joints for mounting the laser on the tripod. or
6 hrs (2 lasers) and 14 hrs (1 laser)
16 x AA alkaline batteries + 1 x 110/220V 50/60 Hz mains by using the 2nd set of batteries
power pack with adaptors + 1 x 12V cable with vehicle AC (Thanks to the
adaptor. 16 alkaline supplied batteries)
*Output power is less than 1 mW. In case of exposure, the natural reflex to blink and turn the head away is sufficient to protect from risk of injury.
**Maximum run time (Unit ON - flash and alarm OFF)
OPTIONAL ACCESSORIES
Model Ref Use temperature Storage temperature
Sucker attachment
Alternative to tripod for -25°C to +50°C -40°C to +70°C
mounting laser on smooth
surfaces (glass, vehicles etc.) D11.06.014
52
MINEHOUNDTM VMR3 Dual-Sensor Mine
Detector for EOD and Search Applications
MINEHOUNDTM VMR3 is a proven Vallon GmbH Commercial-Off-The-Shelf (COTS) product. The advanced Ground Penetrating Radar
(GPR) technology incorporated into MINEHOUNDTM has been developed by Cobham.
Proven high-performance dual-sensor hand-held detector for worldwide Counter-IED and mine clearance operations.
53
Virtual Reality (VR) Handheld Detector
Training System
54
Virtual Reality (VR) Handheld Detector
Training System
55
AMULET Robot-Mounted Mine Detection
System for EOD and Search Applications
56
AMULET Robot-Mounted Mine Detection
System for EOD and Search Applications
Simple to train
AMULET is also very simple to train. Cobham
can additionally provide a virtual-reality
(VR) training system to support AMULET
deployments. These VR trainers provide
a number of instructor-configurable
representative scenarios. Different buried
threat-types can be positioned within a fully
synthetic environment and presented to
students prior to operational use.
57
AMULET Vehicle-Mounted Mine Detection
System for EOD and Search Applications
58
AMULET Vehicle-Mounted Mine Detection
System for EOD and Search Applications
59
SAILOR® 5051 AIS-SART
AIS Search And Rescue Transponder
The SAILOR 5051 AIS-SART is Features include: The SAILOR 5051 AIS-SART can under most
a manual deployment survivor Ship or survival craft options flags be exchange with the SAILOR SART II
location device intended for use as the mandatory SOLAS carriage product.
Internationally approved
For detailed information, see the dedicated
on life-rafts or survival crafts. It Waterproof to 10 meters Product Sheet for SAILOR SART II.
meets IMO SOLAS requirements Floats
and is an alternative to the well
Compact and lightweight
known SAILOR SART II radar
Non-hazardous battery for safe
SART.
transportation
The SAILOR 5051 AIS-SART is compact Min. 96 hour operational battery life
and easy to operate and deploy. It is a 6 year battery life
portable device packed inside a quick LED visual indication of operation
release carry bag for fast evacuation. Built-in test facility
Mounting options
The SAILOR 5051 AIS-SART transmits
target survivor information including High visibility yellow carry case
structured alert messages, GPS position Integral multi-channel GPS
information and a unique serial identity
number. Once activated, the SAILOR 5051
AIS-SART transmits continually for mini-
mum 96 hours. An in built GPS provides
accurate position information to assist a
quick recovery of survivors.
60
SAILOR® 5051 AIS-SART
AIS Search And Rescue Transponder
5051
AIS SART
BATTERY
Type Lithium metal
Operating life 96 hours minimum
Storage 6 years’
Service Replaceable
61
SAILOR® SART II
9 GHz Search And Rescue Transponder
All products from the SAILOR Features include: The SAILOR SART II can under most flags
product programme are designed Ship or survival craft options be exchange with the SAILOR 5051 AIS-
for the rough conditions at sea SART as the mandatory SOLAS carriage
Waterproof to 10 m
and the SAILOR SART II is no product. For detailed information, see the
Maintenance free dedicated Product Sheet for SAILOR 5051
exception. The SAILOR SART II Replaceable, 5 year battery pack AIS-SART.
is small and easy to use, offering
Audio/visual indication of operation
safety in critical situations.
Built-in test facility
Integral lanyard
The SAILOR SART II is a 9 GHz
X-band self contained, water- Mounting options – internal/external
proof radar transponder intend-
ed for emergency use at sea. It
has been designed for assisting
rescue operations in accordance
with IMO, SOLAS requirements.
62
SAILOR® SART II
9 GHz Search And Rescue Transponder
264mm
55mm
90mm
284mm
GENERAL SPECIFICATIONS
Receiver Response 9.2-9.5GHz, sensitivity better than –50dBm
Transmitter Response 12 forward and return sweeps through the
range 9.2-9.5GHz
Nominal sweep times 7.5μs forward
and 0.4μs return
Minimum recovery time following excitation,
less than 10μs
Response reply to receiver signal less
than 0.5μs
Radiated Power (ERP) Not less than 400mW (+26dBm)
Duration of Operation 96 hours in standby condition followed by
a minimum 8 hours of transmission while
being continually interrogated with a pulse
repetition frequency of 1kHz
Temperature Range -20°C to +55°C operational
-30°C to +65°C storage
Antenna Characteristics Vertical beamwidth at least +/- 12.5 degree
relative to the horizontal plane of the radar
transponder. Azimuthal beamwidth
omni-directional to +/- 2dB
Effective Antenna Height 1 meter or greater
Weight 530g (with mast and bracket)
Dimensions 264 mm long x 90 mm diameter
Depth with bracket 101 mm
TRANSPORTATION
UN 3091 Class 9 hazard restrictions apply.
63
SAILOR® SE-II AND SGE-II EPIRBs
Emergency Position Indicating Radio Beacon
The SAILOR SE-II and SGE-II When shipped the beacon is programmed Once removed from its mounting brack-
Satellite EPIRBs are satellite with a unique serial number which must et, activation happens automatically by
distress beacons designed to be registered with the national authorities. immersion of the water or manually by a
operate in conjunction with the Where national authorities allow, the protected push button on the rear of the
Cospas-Sarsat international sat- beacon can be re-programmed with the EPIRB. An additional self-test button runs
vessels satellite or radio call sign. This is a short diagnostic check and indicates
ellite search and rescue system.
done by the distributor using an infra-red that the EPIRB is ready for use. The spe-
light pen connected to a Windows based cially designed bracket prevent uninten-
For GMDSS compliance, the SAILOR
computer. The SAILOR EPIRB is supplied tional activation in carry-off situations.
406MHz Satellite EPIRB has a slimline fully
with a fully enclosed automatic float free
enclosed float free housing which allows
housing which allows it to be self-tested
self-testing of the EPIRB in question. The
while in the housing. For non GMDSS use
SAILOR EPIRB is also available with a quick
the unit can be supplied in a quick release
release bulkhead mounting bracket for
bulkhead mounting bracket.
carry-off situations.
Features include:
GMDSS compliant
Global distress alerting
Satellite location
Small and lightweight
Fully enclosed housing
5-year shelf life
Built-in GPS (model SGE-II only)
64
SAILOR® SE-II AND SGE-II EPIRBs
Emergency Position Indicating Radio Beacon
134 147
130
435
390
255
115 108
Float-free housing
GENERAL SPECIFICATIONS
Message formats Serialised, MMSI and radio call sign
Programming Via RS232 light pen and Windows based PC
Temperature Operating -20°C to +55°C (Class 2)
Temperature Storage -30°C to +70°C
Battery life 5 years storage then 48 hours operation
Sealing depth Waterproof to 10m
Weight 770g (1.7lb)
406MHz TRANSMITTER
Frequency 406.025MHz +/-1kHz
Output power 5 Watts
Modulation Typical phase
VISUAL LOCATION
Intensity 0.75Cd light output minimum
Flash rate 23 flashes per minute
Strope light type Two high intensity LEDs
65
ND-SV003
See Through Wall Radar System
66
System Overview
ND-SV003 See Through Wall Radar System is specially designed for localization of
living people behind walls or optically nontransparent obstacles during antiterrorism
operations, natural disaster rescue missions, avalanche recovery search, or locating
people trapped in smoke filled rooms.
Based on its highlighted feature of long range, high resolution and strong
penetrability, the ND-SV003 provides a best-in-class solution for government
agencies, such as Police force, SWAT, Drug Enforcement Officers, Army, Navy, Air
Force and Fire department.
System Configuration
The system consists of the radar host, removable battery, battery charger and
terminal PAD. The radar host is including transmitter module, receiver module and
signal processing module for complete detection. The Terminal PAD is a tablet,
which displays the target information inside the building. It can be operated remotely
by a field engineer in a secondary location or attached to the radar host and
operated as one unit.
System Advantages
Strong penetration
It is able to penetrate a 50cm brick & concrete solid wall to detect the human
target within 30m.
Real time
It is able to detect and display multiple moving targets in real time.
High resolution
±5cm in distance, ±0.5m in position (depending on situations)
67
Technical Specifications
Radar system UWB pulse radar
Antenna type Enhancement mode medium offset UWB antenna
Central frequency 0.7~2GHz
Concrete, soil, rock, wood, cement, plaster, brick,
Penetrable material reinforced concrete, adobe, drywall and other standard
building materials
Penetrability Penetrate 50cm brick & concrete solid wall
Wall thickness 50cm
Through-wall penetrability
Detection range Stationary alive entity
Remote control distance ≥150m in open space
Field angle ≥±60°
Detecting angle and
Horizontal area ≥5800m2
detection range
Cone-shape volume ≥48000m³
Range resolution ±5cm
Angular resolution ±2°
Cross range ±0.5m@10m (depending on situations)
Simultaneous detection of static and living objects
Detecting mode
Multiple targets, two dimension positioning
Number of target ≥5
Medium offset mode Air/wall/ruins
GPS Yes
Component Radar host Terminal PAD
Overall dimension and Size 620mm*320mm*160mm 200mm*136mm*21mm
weight Weight 5Kg 0.65Kg
Working hour ≥8h ≥4h(per battery)
Operation system Andriod 4.2.1
Professional software ND Defense SV series Software
Operation temperature -30℃~70℃
IP class IP65
Application area Rescue, emergency treatment, public security
Remote expert support Yes
68
ND-MU001
Multi-rotors UAV
69
Product Description
ND-MU001 Multi-rotors UAV is a specially designed hydrogen fuel cell
powered multi-rotors UAV. Compared with normal multi-rotor drones which
use lithium ion batteries, the ND-MU001 has much longer endurance and
accordingly enables wider applications.
Special Features
Powered by hydrogen fuel cells
3 hours of flight time
Able to carry a variety of equipment
Easy to Operate
Customization can be done according to user’s requirements
70
Technical Specifications
Height 700mm
Wind resistance ≥6
71
TM
72
TM
For the purpose of configuring microwave downlink systems, BMS groups the systems into
three categories:
Short Range Omni Tx Omni Rx
Medium Range Omni Tx High Gain Rx
Long Range High Gain Tx High Gain Rx
The antennas used on the transmit and receive sites are the primary factors that determine the
range of each system. Maximum distances are based on the frequency, transmitter power,
antenna gain, and losses from system cabling. Systems in the 2 GHz frequency range tend to
perform better than systems in the 6 GHz range.
73
74
For more information on our
products and services please contact:
+84.982900000
75
www.suntel.com.vn