panduan
beesmant 3.3
SVPPOMES bY USBK/USBNBK 4eam SD/MI ana SMPPanavan Feesmart verst 33
CARA SETTING SERVER DAN CLIENT
‘SETTING IP ADDRESS SERVER DAN CLIENT
1. Masuk ke network and sharing center melalui control panel
‘View your basi network information and setup connections
Wer yor tives
Change sdanced sheng Unidentified net decenype _ Nonetoteccess
ange Pale neat omens: Ehemetd
Hg se enencmneciener neve
Setup aon ca po YH coment 2 otras poe
ES} Trove tems
Dngose and pa eter: elon get reubesheciag Woman.
2._ Pili salah satu dan Klik kanan pilih properties sesuai kabel yang tertancap di server
ee
‘asBotOthana. all nnn be 5
4. Setting IP addres server dan klik OK semisal : 192.168.1.22 sedangkan subnet mask
otomatis setelah itu klik OK
sumoriea bi Zan, aBEE\ OSMART
‘cn toee Paavan Peesmart versi 33
Intemet Protocol Version 4 (TCP/IPud) Properties 4
General
‘You can get IP settings assigned automaticaly f your network supports
this capabilty. Otherwise, you need to ask your network administrator
forthe appropriate IP settings.
(obtain an P adéress automaticly
Wee the folowing 1P address:
address: 182.68. 0.
‘Subnet mask: 255 255.255. 0
Obtain DNS server address automaticaly
vetate settings pon ext aaa
[oo [cone
5. Untuk setting Client sama prosedumya (urut no 14 diatas), akan tetapi harus
dliperhatikan cara pengisian IP addresnya harus berbeda dengan server. Sebagai contoh:
Server:
TP address 2192.1681.22
Subnet mask :255.255.255.0
Client 1:
Paddress 192.168.1.23
Subnet mask 1 255,255.256.0
Default gateway —: 192.168.1.22 (IP server)
Client 2:
BP address 1192.168.1.24
Subnet mask + 255,255.256.0
Default gateway: 192.168.1.22 (IP server)
Dan seterusnya
‘svroriea by Zan 2