Prayush Rajbhandari 074/MSStE/016
2) Following are the results of SPT in sand. Determine the correct SPT Number (N:}e at various depth.
Note that the water table was not observed within a depth of 10.5m below the ground surface.
‘Assume that unit weight of sand is 17.3kN/m?
Referto
Solution,
Depth{m) Neo
15, 8
3.0 7
45 2
6.0 14
75 B
above example, e
jate the average soil friction angle («p’) for
to 2=7.5m.
For overburden pressure correction effective overburden pressure and hence unit weight,
of soil must be known.
Yoo 17.3kN/m?
00> Yoox Z
Here no water table is observed at 10.5 m.
06'= 09 ~ U= 09-0 = oe
Where uis pore water pressure.
‘And os is effective overburden pressure at corresponding depth,
Where, N’= Corrected value of observed N
y= Correction factor for overburden pressure
From Peck, Hanson and Thornburn (1974), we have
Cu=0.77 Logse(2000/ 0), where of is in KN/m?
SN. | Depth(m) | Nes | oe Gu (Na)eo (Na) Rounded
1 [4s 8 25.95 | 1.4529 | 11.6232 | 12
2 [30 7 S19 1221 | 85a7e [9
3/45 a2 [7785 | 1.0855 | 13.0262 | 13,
4 [60 14 [1038 | 0.9893_| 13.8505 [14
5 [75 13 [129.75 Joo? [1101 [42