THE WADDELOW DESTGN
TRI-Q STRAIGHT CANARD
MANUFACTURING SEQUENCE
Foan block layout is identica} to plano Page 5-2 and 5-5 of 1st Canary
except a1) ends are ot et 90° thus making all blocks rectangles that
is all comers are 90°.
Shear web is cut at 90° to watertino, not half round - there in no
zound spar
Proceed to layout and hot wire out the cores per plans on ne 5-2 and
5-3. .
‘The shear web is out at exactly the centro of the round sper cut out
Gut centercore UL 152 to Bh 15 u
Cut outboard cores Bh 48.8 to Bb 100
from one piece 5142" long
Mark and identify all BL and Level Lines on cach core
cand/out off fish teil on all coren to produce o mmooth xadius at the
top and bottom of the shear wob faceCANARP LAYUP- EXPLODED ViEW
Bip SHEARER
RemporceMent
=
ai? SHEAR WEB
SPARCAPS @23C
SECTION A-A
Antodelow
4/60