Professional Documents
Culture Documents
RCC52 Column Chart Generation
RCC52 Column Chart Generation
MATERIALS
fcu 30 N/mm² gm 1.15 steel Cover 30 mm
fy 500 N/mm² gm 1.5 concrete h agg 20 mm
steel class A
SECTION
h 400 mm
b 400 mm X X SINGLE AXIS
with 3 bars per face BENDING
All bars in 400 wide faces
BAR ARRANGEMENTS
Type Bar Ø Asc % Link Ø Bar c/c Nbal (kN) Nuz (kN) Checks
H 32 3.02 8 146.0 1113.7 4177.4 ok
H 25 1.84 8 149.5 1104.4 3385.1 ok
H 20 1.18 6 154.0 1106.9 2938.3 ok
H 16 0.75 6 156.0 1105.8 2652.3 ok
H 12 0.42 6 158.0 1106.2 2429.9 ok
H 10 0.00 6 159.0 0.0 0.0 < 0.4% - ignored
N:M INTERACTION CHART for 400 x 400 column, grade C30, 30 mm cover and
A X IA L C O M P R E S S IO N , N , kN
KEY
6H32
4500.00
2
4000.00 6H25
3500.00
6H20
3000.00 3000
6H16
2500.00
6H12
2000.00
1850
1500.00 1500
500.00 500 2
0.00
0.00 50.00 MOMENT
100.00 150.00 200.00 Mx 300.00 350.00 400.00 450.00
250.00
kNm
LOADCASES Load case N (kN) Mx' (kNm) Load case N (kN) Mx' (kNm)
A1 top 500 200 6 H20 4 1500 150 6 H16
A1 bot 1850 100 6 H16 5 1000 150 6 H12
A2 bot 3000 50 6 H25 6 1000 50 6 H12
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS I
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v4.0 on CD © 2006 TCC
CALCULATIONS
32 Bar diameter
d' = 54 mm d= 346 mm Asc = 4825.5 mm²
N=0 quadratic a = 4824.000 b= ### c = -9E+07
n max = 913.2 Interval = 5.497 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 88.26 93.76 99.25 104.75 110.25 115.74 121.24 126.74 132.23 137.73 143.23 148.72 154.22 159.72 165.21
Fc Conc comp force 425764 452281 478797 505313 531830 558346 584862 611379 637895 664412 690928 717444 743961 770477 796993
c strain Steel comp strain 0.00136 0.00148 0.00160 0.00170 0.00179 0.00187 0.00194 0.00201 0.00207 0.00213 0.00218 0.00223 0.00227 0.00232 0.00236
t strain Steel tens strain 0.01022 0.00942 0.00870 0.00806 0.00748 0.00696 0.00649 0.00606 0.00566 0.00529 0.00496 0.00464 0.00435 0.00408 0.00383
fsc Steel comp stress 258.32 283.43 305.76 325.74 343.73 360.02 374.82 388.34 400.74 412.15 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 623255 683837 737709 785928 829338 868625 904349 936975 966888 994414 1016688 1016688 1016688 1016688 1016688
Fst Steel tens force 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019
z Conc lever arm 306.28 303.81 301.34 298.86 296.39 293.92 291.44 288.97 286.49 284.02 281.55 279.07 276.60 274.13 271.65
N Fc + Fsc - Fst 0.00 87.10 167.49 242.22 312.15 377.95 440.19 499.34 555.76 609.81 658.60 685.11 711.63 738.15 764.66
M MOR 312.39 324.37 335.24 345.15 354.22 362.56 370.26 377.36 383.94 390.04 395.25 397.07 398.75 400.31 401.74
Labels for chart
N dif 87.10 80.39 74.73 69.93 65.80 62.24 59.14 56.43 54.04 48.79 26.52 26.52 26.52 26.52 26.52
M dif 11.98 10.87 9.91 9.08 8.34 7.69 7.11 6.58 6.10 5.20 1.82 1.69 1.56 1.43 1.29
25 Bar diameter
d' = 50.5 mm d = 349.5 mm Asc = 2945.2 mm²
N=0 quadratic a = 4824.000 b= ### c = -5E+07
n max = 922.5 Interval = 6.253 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 72.33 78.58 84.83 91.09 97.34 103.59 109.85 116.10 122.35 128.61 134.86 141.12 147.37 153.62 159.88
Fc Conc comp force 348909 379075 409242 439408 469574 499741 529907 560073 590240 620406 650572 680739 710905 741071 771238
c strain Steel comp strain 0.00106 0.00125 0.00142 0.00156 0.00168 0.00179 0.00189 0.00198 0.00206 0.00213 0.00219 0.00225 0.00230 0.00235 0.00239
t strain Steel tens strain 0.01341 0.01207 0.01092 0.00993 0.00907 0.00831 0.00764 0.00704 0.00650 0.00601 0.00557 0.00517 0.00480 0.00446 0.00415
fsc Steel comp stress 197.85 236.75 269.91 298.51 323.44 345.37 364.79 382.12 397.69 411.73 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 291361 348638 397470 439597 476312 508594 537200 562725 585641 606329 620537 620537 620537 620537 620537
Fst Steel tens force 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270
z Conc lever arm 316.95 314.14 311.32 308.51 305.70 302.88 300.07 297.25 294.44 291.63 288.81 286.00 283.18 280.37 277.56
N Fc + Fsc - Fst 0.00 87.44 166.44 238.73 305.62 368.06 426.84 482.53 535.61 586.46 630.84 661.01 691.17 721.34 751.50
M MOR 197.70 210.25 221.37 231.31 240.27 248.41 255.82 262.60 268.82 274.54 279.12 281.41 283.53 285.47 287.25
Labels for chart
N dif 87.44 79.00 72.29 66.88 62.45 58.77 55.69 53.08 50.85 44.37 30.17 30.17 30.17 30.17 30.17
M dif 12.55 11.12 9.94 8.96 8.13 7.41 6.78 6.22 5.72 4.58 2.29 2.12 1.95 1.78 1.61
20 Bar diameter
d' = 46 mm d= 354 mm Asc = 1885.0 mm²
N=0 quadratic a = 4824.000 b = 2.37E+05 c = -3E+07
n max = 934.3 Interval = 6.951 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 58.44 65.39 72.35 79.30 86.25 93.20 100.15 107.10 114.05 121.00 127.96 134.91 141.86 148.81 155.76
Fc Conc comp force 281933 315465 348998 382530 416063 449596 483128 516661 550194 583726 617259 650791 684324 717857 751389
c strain Steel comp strain 0.00075 0.00104 0.00127 0.00147 0.00163 0.00177 0.00189 0.00200 0.00209 0.00217 0.00224 0.00231 0.00237 0.00242 0.00247
t strain Steel tens strain 0.01770 0.01545 0.01363 0.01212 0.01087 0.00979 0.00887 0.00807 0.00736 0.00674 0.00618 0.00568 0.00523 0.00483 0.00445
fsc Steel comp stress 135.64 194.21 241.52 280.53 313.26 341.11 365.09 385.95 404.28 420.49 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 127840 183036 227625 264397 295241 321484 344085 363752 381021 396307 397144 397144 397144 397144 397144
Fst Steel tens force 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773
z Conc lever arm 327.70 324.57 321.44 318.32 315.19 312.06 308.93 305.80 302.68 299.55 296.42 293.29 290.16 287.04 283.91
N Fc + Fsc - Fst 0.00 88.73 166.85 237.15 301.53 361.31 417.44 470.64 521.44 570.26 604.63 638.16 671.69 705.23 738.76
M MOR 131.76 145.10 156.60 166.68 175.64 183.68 190.95 197.55 203.58 209.10 212.18 214.92 217.45 219.77 221.88
Labels for chart
N dif 88.73 78.12 70.30 64.38 59.78 56.13 53.20 50.80 48.82 34.37 33.53 33.53 33.53 33.53 33.53
M dif 13.34 11.49 10.08 8.96 8.04 7.27 6.61 6.03 5.51 3.08 2.74 2.53 2.32 2.11 1.90
16 Bar diameter
d' = 44 d= 356 mm Asc 1206.4 mm²
N=0 quadratic a = 4824.000 b = 1.52E+05 c = -2E+07
n max = 939.6 Interval = 7.428 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 48.28 55.71 63.14 70.56 77.99 85.42 92.85 100.27 107.70 115.13 122.56 129.99 137.41 144.84 152.27
Fc Conc comp force 232904 268736 304567 340398 376229 412061 447892 483723 519555 555386 591217 627048 662880 698711 734542
c strain Steel comp strain 0.00031 0.00074 0.00106 0.00132 0.00153 0.00170 0.00184 0.00196 0.00207 0.00216 0.00224 0.00232 0.00238 0.00244 0.00249
t strain Steel tens strain 0.02231 0.01887 0.01624 0.01416 0.01248 0.01109 0.00992 0.00893 0.00807 0.00732 0.00667 0.00609 0.00557 0.00510 0.00468
fsc Steel comp stress 48.66 133.72 198.76 250.11 291.68 326.02 354.87 379.44 400.63 419.08 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 29350 80656 119891 150865 175939 196653 214053 228874 241652 252781 254172 254172 254172 254172 254172
Fst Steel tens force 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255
z Conc lever arm 334.27 330.93 327.59 324.25 320.90 317.56 314.22 310.88 307.53 304.19 300.85 297.51 294.16 290.82 287.48
N Fc + Fsc - Fst 0.00 87.14 162.20 229.01 289.91 346.46 399.69 450.34 498.95 545.91 583.13 618.97 654.80 690.63 726.46
M MOR 87.01 100.50 111.87 121.72 130.40 138.16 145.17 151.53 157.34 162.65 166.20 169.29 172.15 174.76 177.14
Labels for chart
N dif 87.14 75.07 66.81 60.91 56.54 53.23 50.65 48.61 46.96 37.22 35.83 35.83 35.83 35.83 35.83
M dif 13.49 11.37 9.84 8.68 7.76 7.01 6.36 5.81 5.31 3.55 3.09 2.85 2.62 2.38 2.14
12 Bar diameter
d' = 42 d= 358 mm Asc 678.6 mm²
N=0 quadratic a = 4824.000 b = 8.54E+04 c = -1E+07
n max = 944.9 Interval = 7.931 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 37.47 45.40 53.33 61.27 69.20 77.13 85.06 92.99 100.92 108.85 116.78 124.71 132.65 140.58 148.51
Fc Conc comp force 180765 219024 257284 295543 333803 372063 410322 448582 486841 525101 563361 601620 639880 678139 716399
c strain Steel comp strain -0.00042 0.00026 0.00074 0.00110 0.00138 0.00159 0.00177 0.00192 0.00204 0.00215 0.00224 0.00232 0.00239 0.00245 0.00251
t strain Steel tens strain 0.02994 0.02410 0.01999 0.01695 0.01461 0.01275 0.01123 0.00997 0.00892 0.00801 0.00723 0.00655 0.00595 0.00541 0.00494
fsc Steel comp stress -97.99 39.07 135.36 206.72 261.72 305.41 340.96 370.44 395.28 416.51 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force -33246 13255 45926 70138 88800 103624 115683 125686 134116 141318 142972 142972 142972 142972 142972
Fst Steel tens force 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518
z Conc lever arm 341.14 337.57 334.00 330.43 326.86 323.29 319.72 316.15 312.59 309.02 305.45 301.88 298.31 294.74 291.17
N Fc + Fsc - Fst 0.00 84.76 155.69 218.16 275.08 328.17 378.49 426.75 473.44 518.90 558.81 597.07 635.33 673.59 711.85
M MOR 51.16 64.73 75.85 85.35 93.70 101.18 107.94 114.11 119.76 124.94 128.96 132.46 135.68 138.63 141.30
Labels for chart
N dif 84.76 70.93 62.47 56.92 53.08 50.32 48.26 46.69 45.46 39.91 38.26 38.26 38.26 38.26 38.26
M dif 13.57 11.11 9.50 8.35 7.47 6.76 6.17 5.65 5.18 4.03 3.49 3.22 2.95 2.67 2.40
10 Bar diameter
d' = 41 d= 0 mm Asc 0.0 mm²
N=0 quadratic a = 4824.000 b = 0.00E+00 c= ###
n max = 0.0 Interval = 0.000 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Fc Conc comp force 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
c strain Steel comp strain #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
t strain Steel tens strain #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
fsc Steel comp stress #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
fst Steel tens stress #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Fsc Steel comp force #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Fst Steel tens force #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
z Conc lever arm 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
N Fc + Fsc - Fst 0.00 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
M MOR #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Labels for chart
N dif #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
M dif #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
0 0 0 0 0 0
LOADCASES 200 100 50 150 150 50
404576719.xls 12/13/2018
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS II
Made by RMW Job No R68 COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005
Date 13-Dec-18 Originated from 'RCC52.xls' v4.0 on CD © 2006 TCC
404576719.xls 12/13/2018
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS III
Made by RMW Job No R68 COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Date 13-Dec-18 Originated from 'RCC52.xls' v4.0 on CD © 2006 TCC Date 13-Dec-18
56.51 51.27 46.73 42.77 39.29 36.21 33.49 31.06 28.89 26.93 25.17 23.58 22.13 20.81 19.61 18.51 0
-8.25 -7.49 -6.82 -6.24 -5.74 -5.29 -4.89 -4.53 -4.22 -3.93 -3.68 -3.44 -3.23 -3.04 -2.86 -2.70 0
34.49 31.29 28.52 26.10 23.98 22.10 20.44 18.96 17.63 16.44 15.36 14.39 13.51 12.70 11.97 11.30 0
-5.16 -4.68 -4.26 -3.90 -3.58 -3.30 -3.06 -2.83 -2.64 -2.46 -2.30 -2.15 -2.02 -1.90 -1.79 -1.69 0
22.07 20.03 18.25 16.71 15.35 14.15 13.08 12.13 11.28 10.52 9.83 9.21 8.64 8.13 7.66 7.23 0
-3.40 -3.08 -2.81 -2.57 -2.36 -2.18 -2.01 -1.87 -1.74 -1.62 -1.51 -1.42 -1.33 -1.25 -1.18 -1.11 0
14.13 12.82 11.68 10.69 9.82 9.05 8.37 7.77 7.22 6.73 6.29 5.89 5.53 5.20 4.90 4.63 0
-2.20 -2.00 -1.82 -1.67 -1.53 -1.41 -1.31 -1.21 -1.13 -1.05 -0.98 -0.92 -0.86 -0.81 -0.76 -0.72 0
7.95 7.21 6.57 6.01 5.52 5.09 4.71 4.37 4.06 3.79 3.54 3.32 3.11 2.93 2.76 2.60 0
-1.26 -1.14 -1.04 -0.95 -0.87 -0.80 -0.74 -0.69 -0.64 -0.60 -0.56 -0.52 -0.49 -0.46 -0.44 -0.41 0
#DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! 0
#DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! 0
404576719.xls 12/13/2018
Project Spreadsheets to BS 8110 LOADCASES
Location Columns at A1, A2 etc
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v4.0 on CD © 2006 TCC Date 13-Dec-18
LOADCASE 1
N = 500 M = 200
Nuz Mmax Status Nuz Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 377.4 ok 0 4177.4 377.4 377.36 499.34 6.5805 56.43
25 3385.1 264.6 ok 0 3385.1 264.65 262.60 482.53 6.2222 53.082
20 2938.3 201.0 ok 20 2938.3 201.04 197.55 470.64 6.0289 50.802
16 2652.3 157.5 Fails 0 2652.3 157.46 157.34 498.95 5.3094 46.96
12 2429.9 122.8 Fails 0 2429.9 122.78 119.76 473.44 5.1782 45.461
10 0 0.0 Fails 0 ### ### #DIV/0! 0 ### ###
20
LOADCASE 2
N= 1850 M = 100
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 319.4 ok 0 319.4 354.87 1514.7 -36.87 348.52
25 3385.1 217.1 ok 0 217.11 236.37 1660.8 -24.279 238.53
20 2938.3 160.3 ok 0 160.33 170.51 1755.5 -20.232 187.75
16 2652.3 122.5 ok 16 122.48 125.32 1826.4 -19.321 160.73
12 2429.9 92.0 Fails 0 92.002 105.33 1737.4 -17.387 146.86
10 0 0.0 Fails 0 ### #DIV/0! 0 ### ###
16
LOADCASE 3
N = 3000 M= 50
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 179.4 ok 0 179.41 186.93 2949 -28.281 191.74
25 3385.1 57.6 ok 25 57.569 59.79 2985.1 -6.3613 42.55
20 2938.3 0.0 Fails 0 ### 0.00 2938.3 0 0
16 2652.3 0.0 Fails 0 ### 0.00 2652.3 0 0
12 2429.9 0.0 Fails 0 ### 0.00 2429.9 0 0
10 0 0.0 Fails 0 ### #DIV/0! 0 ### ###
25
LOADCASE 4
N = 1500 M = 150
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 356.4 ok 0 356.4 396.53 1113.7 -41.658 400.91
25 3385.1 251.6 ok 0 251.64 261.27 1398.6 -24.902 262.22
20 2938.3 194.3 ok 0 194.34 207.88 1341.8 -18.356 214.46
16 2652.3 156.6 ok 16 156.6 157.83 1486 -15.316 173.87
12 2429.9 127.2 Fails 0 127.21 132.60 1433 -12.431 154.26
10 0 0.0 Fails 0 ### #DIV/0! 0 ### ###
16
LOADCASE 5
N = 1000 M = 150
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 407.3 ok 0 407.29 408.42 976.79 -2.0859 42.485
25 3385.1 295.3 ok 0 295.28 295.36 992.84 -0.402 34.525
20 2938.3 231.1 ok 0 231.12 230.78 973.49 0.4324 33.533
16 2652.3 187.4 ok 0 187.35 187.06 977.28 0.4594 35.831
12 2429.9 152.6 ok 12 152.64 152.38 979.67 0.4901 38.26
10 0 0.0 Fails 0 ### #DIV/0! 0 ### ###
12
LOADCASE 6
N = 1000 M= 50
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.4 407.3 ok 0 407.29 408.42 976.79 -2.0859 42.485
25 3385.1 295.3 ok 0 295.28 295.36 992.84 -0.402 34.525
20 2938.3 231.1 ok 0 231.12 230.78 973.49 0.4324 33.533
16 2652.3 187.4 ok 0 187.35 187.06 977.28 0.4594 35.831
12 2429.9 152.6 ok 12 152.64 152.38 979.67 0.4901 38.26
10 0 0.0 Fails 0 ### #DIV/0! 0 ### ###
12
Disclaimer
All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the significance and limitations of its
contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice
or information is accepted by MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-The
Concrete Centre software and publications are subject to revision from time to time and they should therefore ensure that they are in
possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The
Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800
Status of spreadsheet This spreadsheet is shareware but may not be used for commercial purposes until
Public release version. the user has registered with The Concrete Centre using the licence validation form
available on The Concrete Centre website www.concretecentre.com/rcdesign
Revision history RCC52 Column Chart generation