Professional Documents
Culture Documents
Side Reinforcement in Beams
Side Reinforcement in Beams
Home / Reference Guides / Concrete Design - BS 8110 / Beam Design to BS 8110 / Side Reinforcement in Beams
To control cracking in beams with a total depth ˃ 750mm, side bars are provided in the side faces of the
beam.1
Where
b = breadth of sec on
IF
b > 500mm
THEN
b = 500
The diameter of the bar to be used is subject to qualifica on by the user therefore;
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2016/BS/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_Design/… 1/2
15/12/2018 Side Reinforcement in Beams
The distribu on of these bars is over a distance of two-third of the beam’s overall depth measured from its
tension face.
The number of side bars in each ver cal face of the beam is given by;
where
Parent topic
• Design Parameters for Longitudinal Bars
1. BS 8110-1:1997 3.12.11.2.6
2. BS 8110-1:1997 3.12.5.4
3. BS 8110-1:1997 3.12.11.2.6
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2016/BS/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_Design/… 2/2