Period 4 My Research and Design Process While I was looking at different types of speakers I came across a speaker with that was made out of a suitcase, so I got the idea to make a easily portable speaker. I used my sisters old vintage london suitcase to be the body of the speaker. The speakers I used were a two 3 inch woofers, one 4 inch woofer, and a 2.5 inch tweeter. The 4 inch speaker was placed on the back of the suitcase for more surround sound. The original idea was to make it battery powered, but it would have taken much longer to do so I scrapped the idea. Project Diagram in Sketchup I decided to use sketchup for the drawing because it was a simple design and didn’t need a lot of detail. (The drawing shows two 4 inch speakers and no tweeter because I changed plans last second). Tools Used -Hand Drill -Sheet metal cutter -Drill Press
-Wire Cutter -Screwdriver -Sauter Iron
-Hot Glue Gun
Materials Used -Sheet Metal -Sauter -Hot Glue -Lever Switch
-24volt AC adapter -Copper wire -
Steps to success -Cutting the holes for the speakers and tweeter
-Installing the speaker and tweeter with screws
-Sautering the connections between the speakers to the power output
- Installing the Amp and connecting it to the power
-Cutting the sheet metal to make the control panel
-Sautering the switches and AC power female part to the AMP