Professional Documents
Culture Documents
h190 360hd2 TG PDF
h190 360hd2 TG PDF
19
A
B
D E
Tow
Pin
For 90 degree Stacking Aisle add outside
turning radius 35 , plus dimension 24 ,
F
plus load length.
S1
35
23
33
S2
25
S3
G
S4
H190HD2 - H360HD2 SPECIFICATIONS
24
24
18
8
d
ht 9) oa ”
rig 21 l 2
7
g (1 ng 7
in 0 lo e x
ct 8. 2” id ):
16
se h 4 7 w D 2
er it x ” 0H 5)
nt w de 76 6 54 5)
l i le wi th 0-3 (3 54 52) )
ua ais ” wi 30
20
27
Eq le 67.0 D 2); d (H 9.6 (3 5 43 )
g 13 39.6 .9 (3 (3 6 643 3)
an and 80H loa 1 9 4 )
13 43.4 .4 (3 (3 6 936 6)
s -2 g
rk 0 on HD 2
2 1 3 3 )
14 43.4 .0 (3 (3 9 936
fo (H17 l 90 HD D 2S 1 5 0 3
H1 10 H 2 15 55. .0 (
H2 230 0HD D 2 1 55
H 23 0H D 2 1
H 5 H 2
H2 280 0HD D 2
H 30 0H D 2
H 3 H
H3 360
H
H190HD2 -H210HD2 SPECIFICATIONS
1 Manufacturer HYSTER HYSTER
2 Model designation H190HD2 H210HD2
3 Power: battery, diesel, LPG, electric mains Diesel Diesel
GENERAL
10 Axle loading with load, front/rear lbs (kg) 40127 (18198) 4831 (2191) 43333 (18198) 4525 (2191) 43333 (19652) 4525 (2052) 43333 (19652) 4525 (2052)
11 Axle loading without load, front/rear lbs (kg) 13814 (6265) 13503 (6124) 13733 (6265) 14280 (6124) 13733 (6228) 14280 (6476) 13733 (6228) 14280 (6476)
12 Tires Pneumatic Pneumatic Pneumatic Pneumatic
13 Tire size, front 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
WHEELS
14 Tire size, rear 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
15 Number of wheels, front/rear (X = driven) 4X / 2 4X / 2 4X / 2 4X / 2
16 Tread width, front in (mm) 86.2 (2190) 86.2 (2190) 86.2 (2190) 86.2 (2190)
17 Tread width, rear in (mm) 76.0 (1930) 76.0 (1930) 76.0 (1930) 76.0 (1930)
18 Mast tilt, a = forward /b = back degrees 15/12 15/12 15/12 15/12
19 Height of mast, lowered in (mm) 165.0 (4179) 165.0 (4179) 165.0 (4179) 165.0 (4179)
20 Lift height in (mm) 212.0 (5401) 212.0 (5401) 212.0 (5401) 212.0 (5401)
21 Height of mast, extended; without LBE in (mm) 270.0 (6846) 270.0 (6846) 270.0 (6846) 270.0 (6846)
22 Overhead guard height (including wiper) in (mm) 118.7 (3015) 118.7 (3015) 118.7 (3015) 118.7 (3015)
23 Length to face of forks w/std. carriage in (mm) 169.0 (4292) 169.0 (4292) 169.0 (4292) 169.0 (4292)
24 Load distance in (mm) 28.5 (725) 28.5 (725)
25
DIMENSIONS
Lifting speed unloaded (High Performance)* fpm (m/sec) N/A 124.0 (.63) N/A 124.0 (.63)
41 Lowering speed loaded (High Performance)* fpm (m/sec) N/A 98.4 (.50) N/A 98.4 (.50)
Lowering speed unloaded (High Performance)* fpm (m/sec) N/A 94.5 (.48) N/A 94.5 (.48)
42 Tilt speed deg/sec 5.0 5.0 5.0 5.0
43 Drawbar pull with load (at 1 mph/1.6km/h) lbs (kg) 196907 (89300) 211901 (96100) 190292 (86300) 211239 (95800)
Drawbar pull without load (at 1 mph/1.6km/h) lbs (kg) 79380 (36000) 79380 (36000) 80483 (36500) 80483 (36500)
44 Maximum drawbar pull with load lbs (kg) 230643 (104600) 257544 (116800) 230202 (104400) 257544 (116800)
Maximum drawbar pull without load lbs (kg) 79380 (36000) 79380 (36000) 80483 (36500) 80483 (36500)
45 Gradeability with load (at 1 mph/1.6km/h) % 51 53 47 49
Gradeability without load (at 1 mph/1.6km/h) % 32 32 31 31
Gradeability with load % 63 69 57 63
Gradeability without load % 32 32 31 31
46 Service brake air brakes / wet brakes air wet air wet
47 Engine manufacturer/type Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7
48 Engine output, in accordance with ISO 14396 hp (kW) 155 (116) 155 (116) 155 (116) 155 (116)
ENGINE
49 Engine torque lb-ft/rpm (Nm/rpm) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500)
50 Governed speed rpm 2300 2300 2300 2300
51 Number of cylinders/displacement in3 (cm3) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700)
52 Transmission 3-speed autoshift 3-speed autoshift 3-speed autoshift 3-speed autoshift
OTHER
53 Working pressure for attachments psi (bar) 2800 (193) 2800 (193) 2800 (193) 2799 (193)
54 Oil flow for attachments gpm (l/min) 26.4 (100) 26.4 (100) 26.4 (100) 26.4 (100)
CERTIFICATION: These Hyster® lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply
with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are
affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of
the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.
H230HD2 - H230HD2S SPECIFICATIONS
1 Manufacturer HYSTER HYSTER
2 Model designation H230HD2 H230HD2S
3 Power: battery, diesel, LPG, electric mains Diesel Diesel
GENERAL
10 Axle loading with load, front/rear lbs (kg) 48347 (21926) 5872 (2663) 48347 (21926) 5872 (2663) 55778 (25296) 4754 (2156) 55778 (25296) 4754 (2156)
11 Axle loading without load, front/rear lbs (kg) 15940 (7229) 16229 (7360) 15940 (7229) 16229 (7360) 15861 (7193) 16546 (7504) 15861 (7193) 16546 (7504)
12 Tires Pneumatic Pneumatic Pneumatic Pneumatic
13 Tire size, front 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
WHEELS
14 Tire size, rear 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
15 Number of wheels, front/rear (X = driven) 4X / 2 4X / 2 4X / 2 4X / 2
16 Tread width, front in (mm) 86.2 (2190) 86.2 (2190) 86.2 (2190) 86.2 (2190)
17 Tread width, rear in (mm) 76.0 (1930) 76.0 (1930) 76.0 (1930) 76.0 (1930)
18 Mast tilt, a = forward /b = back degrees 15/12 15/12 15/12 15/12
19 Height of mast, lowered in (mm) 176.0 (4453) 176.0 (4453) 176.0 (4453) 176.0 (4453)
20 Lift height in (mm) 213.0 (5411) 213.0 (5411) 213.0 (5411) 213.0 (5411)
21 Height of mast, extended; without LBE in (mm) 281.0 (7118) 281.0 (7118) 281.0 (7118) 281.0 (7118)
22 Overhead guard height (including wiper) in (mm) 119.4 (3033) 119.4 (3033) 119.4 (3033) 119.4 (3033)
23 Length to face of forks w/std. carriage in (mm) 177.0 (4495) 177.0 (4495) 168.1 (4269) 168.1 (4269)
24 Overall width - dry brake axle/wet brake axle* in (mm) 97.80 (2484) 96.30 (2446) 97.80 (2484) 96.30 (2446)
25
DIMENSIONS
Lifting speed unloaded (High Performance)* fpm (m/sec) N/A 94.5 (.48) N/A 94.5 (.48)
41 Lowering speed loaded (High Performance)* fpm (m/sec) N/A 98.4 (.50) N/A 98.4 (.50)
Lowering speed unloaded (High Performance)* fpm (m/sec) N/A 90.6 (.46) N/A 90.6 (.46)
42 Tilt speed deg/sec 5.0 5.0 5.0 5.0
43 Drawbar pull with load (at 1 mph/1.6km/h) lbs (kg) 189189 (85800) 67473 (30600) 189189 (85800) 199773 (90600)
Drawbar pull without load (at 1 mph/1.6km/h) lbs (kg) 90846 (41200) 90846 (41200) 90846 (41200) 90846 (41200)
44 Maximum drawbar pull with load lbs (kg) 220059 (99800) 243432 (110400) 220059 (99800) 243432 (110400)
Maximum drawbar pull without load lbs (kg) 90846 (41200) 90846 (41200) 90846 (41200) 90846 (41200)
45 Gradeability with load (at 1 mph/1.6km/h) % 38 40 38 40
Gradeability without load (at 1 mph/1.6km/h) % 31 31 31 31
Gradeability with load % 46 49 46 49
Gradeability without load % 31 31 31 31
46 Service brake air brakes / wet brakes air wet air wet
47 Engine manufacturer/type Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7
48 Engine output, in accordance with ISO 14396 hp (kW) 155 (116) 155 (116) 155 (116) 155 (116)
ENGINE
49 Engine torque lb-ft/rpm (Nm/rpm) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500)
50 Governed speed rpm 2300 2300 2300 2300
51 Number of cylinders/displacement in3 (cm3) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700)
52 Transmission 3-speed autoshift 3-speed autoshift 3-speed autoshift 3-speed autoshift
OTHER
53 Working pressure for attachments psi (bar) 2800 (193) 2801 (193) 2800 (193) 2800 (193)
54 Oil flow for attachments gpm (l/min) 26.4 (100) 26.4 (100) 26.4 (100) 26.4 (100)
CERTIFICATION: These Hyster® lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply
with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are
affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of
the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.
H250HD2 -H280HD2 SPECIFICATIONS
1 Manufacturer HYSTER HYSTER
2 Model designation H250HD2 H280HD2
3 Power: battery, diesel, LPG, electric mains Diesel Diesel
GENERAL
10 Axle loading with load, front/rear lbs (kg) 52772 (24773) 4810 (2672) 52772 (24773) 4810 (2672) 54624 (24770) 5892 (2672) 54624 (24770) 5892 (2672)
11 Axle loading without load, front/rear lbs (kg) 15938 (7136) 16643 (8308) 15938 (7136) 16643 (8308) 15735 (7136) 18319 (8308) 15735 (7136) 18319 (8308)
12 Tires Pneumatic Pneumatic Pneumatic Pneumatic
13 Tire size, front 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
WHEELS
14 Tire size, rear 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR 10.00-20 14PR
15 Number of wheels, front/rear (X = driven) 4X/2 4X/2 4X / 2 4X / 2
16 Tread width, front in (mm) 86.2 (2190) 86.2 (2190) 86.2 (2190) 86.2 (2190)
17 Tread width, rear in (mm) 76.0 (1930) 76.0 (1930) 76.0 (1930) 76.0 (1930)
18 Mast tilt, a = forward /b = back degrees 15/12 15/12 15/12 15/12
19 Height of mast, lowered in (mm) 176.0 (4453) 176.0 (4453) 176.0 (4453) 176.0 (4453)
20 Lift height in (mm) 213.0 (5411) 213.0 (5411) 213.0 (5411) 213.0 (5411)
21 Height of mast, extended; without LBE in (mm) 281.0 (7118) 281.0 (7118) 281.0 (7118) 281.0 (7118)
22 Overhead guard height (including wiper) in (mm) 119.4 (3033) 119.4 (3033) 119.4 (3033) 119.4 (3033)
23 Length to face of forks w/std. carriage in (mm) 177.0 (4495) 177.0 (4495) 177.0 (4495) 177.0 (4495)
24 Overall width - dry brake axle/wet brake axle* in (mm) 97.80 (2484) 96.30 (2446) 97.8 (2484) 96.30 (2446)
25
DIMENSIONS
Lifting speed unloaded (High Performance)* fpm (m/sec) N/A 94.5 (.48) N/A 94.5 (.48)
41 Lowering speed loaded (High Performance)* fpm (m/sec) N/A 98.4 (.50) N/A 98.4 (.50)
Lowering speed unloaded (High Performance)* fpm (m/sec) N/A 90.6 (.46) N/A 90.6 (.46)
42 Tilt speed deg/sec 5.0 5.0 5.0 5.0
43 Drawbar pull with load (at 1 mph/1.6km/h) lbs (kg) 187866 (85200) 198450 (90000) 187866 (85200) 198450 (90000)
Drawbar pull without load (at 1 mph/1.6km/h) lbs (kg) 99005 (44900) 99005 (44900) 99005 (44900) 99005 (44900)
44 Maximum drawbar pull with load lbs (kg) 218736 (99200) 243432 (110400) 218736 (99200) 243432 (110400)
Maximum drawbar pull without load lbs (kg) 99005 (44900) 99005 (44900) 99005 (44900) 99005 (44900)
45 Gradeability with load (at 1 mph/1.6km/h) % 32 34 32 34
Gradeability without load (at 1 mph/1.6km/h) % 30 30 30 30
Gradeability with load % 38 46 38 46
Gradeability without load % 30 30 30 30
46 Service brake air brakes / wet brakes air wet air wet
47 Engine manufacturer/type Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7
48 Engine output, in accordance with ISO 14396 hp (kW) 155 (116) 155 (116) 155 (116) 155 (116)
ENGINE
49 Engine torque lb-ft/rpm (Nm/rpm) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500)
50 Governed speed rpm 2300 2300 2300 2300
51 Number of cylinders/displacement in3 (cm3) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700)
52 Transmission 3-speed autoshift 3-speed autoshift 3-speed autoshift 3-speed autoshift
OTHER
53 Working pressure for attachments psi (bar) 2800 (193) 2801 (193) 2800 (193) 2801 (193)
54 Oil flow for attachments gpm (l/min) 26.4 (100) 26.4 (100) 26.4 (100) 26.4 (100)
CERTIFICATION: These Hyster® lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply
with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are
affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of
the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.
H300HD2 - H330HD2 SPECIFICATIONS
1 Manufacturer HYSTER HYSTER
2 Model designation H300HD2 H330HD2
3 Power: battery, diesel, LPG, electric mains Diesel Diesel
GENERAL
10 Axle loading with load, front/rear lbs (kg) 63352 (28731) 5138 (2330) 63352 (28731) 5138 (2330) 66646 (30225) 5660 (2567) 66646 (30225) 5660 (2567)
11 Axle loading without load, front/rear lbs (kg) 21988 (9972) 17836 (8089) 21988 (9972) 17836 (8089) 22101 (10023) 19336 (8769) 22101 (10023) 19336 (8769)
12 Tires Pneumatic Pneumatic Pneumatic Pneumatic
13 Tire size, front 12.00-20 16PR 12.00-20 16PR 12.00-20 16PR 12.00-20 16PR
WHEELS
14 Tire size, rear 12.00-20 16PR 12.00-20 16PR 12.00-20 16PR 12.00-20 16PR
15 Number of wheels, front/rear (X = driven) 4X / 2 4X / 2 4X / 2 4X / 2
16 Tread width, front in (mm) 89.6 (2276) 89.6 (2276) 89.6 (2276) 89.6 (2276)
17 Tread width, rear in (mm) 78.7 (2000) 78.7 (2000) 78.7 (2000) 78.7 (2000)
18 Mast tilt, a = forward /b = back degrees 15/12 15/12 15/12 15/12
19 Height of mast, lowered in (mm) 176.0 (4466) 176.0 (4466) 176.0 (4466) 176.0 (4466)
20 Lift height in (mm) 212.0 (5400) 212.0 (5400) 212.0 (5400) 212.0 (5400)
21 Height of mast, extended; without LBE in (mm) 281.0 (7120) 281.0 (7120) 281.0 (7120) 281.0 (7120)
22 Overhead guard height (including wiper) in (mm) 119.8 (3043) 119.8 (3043) 120.6 (3064) 120.6 (3064)
23 Length to face of forks w/std. carriage in (mm) 197.0 (5004) 197.0 (5004) 197.0 (5004) 197.0 (5004)
24 Load distance in (mm) 33.9 (862) 33.9 (862)
25
DIMENSIONS
Lifting speed unloaded (High Performance)* fpm (m/sec) N/A 98.4 (.50) N/A 98.4 (.50)
41 Lowering speed loaded (High Performance)* fpm (m/sec) N/A 98.4 (.50) N/A 98.4 (.50)
Lowering speed unloaded (High Performance)* fpm (m/sec) N/A 90.6 (.46) N/A 90.6 (.46)
42 Tilt speed deg/sec 3.9 3.9 3.9 3.9
43 Drawbar pull with load (at 1 mph/1.6km/h) lbs (kg) 215429 (97700) 233951 (106100) 207050 (94300) 225351 (102200)
Drawbar pull without load (at 1 mph/1.6km/h) lbs (kg) 113337 (51400) 113337 (51400) 118629 (52900) 118629 (52900)
44 Maximum drawbar pull with load lbs (kg) 261513 (118600) 287312 (130300) 249165 (113400) 275405 (124900)
Maximum drawbar pull without load lbs (kg) 113337 (51400) 113337 (51400) 118629 (52900) 116645 (52900)
45 Gradeability with load (at 1 mph/1.6km/h) % 36 38 31 33
Gradeability without load (at 1 mph/1.6km/h) % 33 33 33 33
Gradeability with load % 45 46 38 41
Gradeability without load % 33 33 33 33
46 Service brake air brakes / wet brakes air wet air wet
47 Engine manufacturer/type Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7
48 Engine output, in accordance with ISO 14396 hp (kW) 155 (116) 155 (116) 155 (116) 155 (116)
ENGINE
49 Engine torque lb-ft/rpm (Nm/rpm) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500) 440/1500 (597/1500)
50 Governed speed rpm 2300 2300 2300 2300
51 Number of cylinders/displacement in3 (cm3) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700) 6/409 (6/6700)
52 Transmission 3-speed autoshift 3-speed autoshift 3-speed autoshift 3-speed autoshift
OTHER
53 Working pressure for attachments psi (bar) 2800 (193) 2800 (193) 2800 (193) 2800 (193)
54 Oil flow for attachments gpm (l/min) 26.4 (100) 26.4 (100) 26.4 (100) 26.4 (100)
CERTIFICATION: These Hyster® lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply
with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are
affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of
the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.
H360HD2 SPECIFICATIONS
1 Manufacturer HYSTER
2 Model designation H360HD2
3 Power: battery, diesel, LPG, electric mains Diesel
GENERAL
10 Axle loading with load, front/rear lbs (kg) 72966 (33091) 6077 (2756) 72966 (33091) 6077 (2756)
11 Axle loading without load, front/rear lbs (kg) 22054 (10002) 21708 (9845) 22054 (10002) 21708 (9845)
12 Tires Pneumatic Pneumatic
13 Tire size, front 12.00-20 16PR 12.00-20 16PR
WHEELS
Lifting speed unloaded (High Performance)* fpm (m/sec) 98.4 (.50) 98.4 (.50)
41 Lowering speed loaded (High Performance)* fpm (m/sec) 98.4 (.50) 98.4 (.50)
Lowering speed unloaded (High Performance)* fpm (m/sec) 90.6 (.46) 90.6 (.46)
42 Tilt speed deg/sec 3.9 3.9
43 Drawbar pull with load (at 1 mph/1.6km/h) lbs (kg) 207050 (93900) 224028 (101600)
Drawbar pull without load (at 1 mph/1.6km/h) lbs (kg) 118629 (53800) 118629 (53800)
44 Maximum drawbar pull with load lbs (kg) 249165 (113000) 275405 (124900)
Maximum drawbar pull without load lbs (kg) 118629 (53800) 118629 (53800)
45 Gradeability with load (at 1 mph/1.6km/h) % 28 30
Gradeability without load (at 1 mph/1.6km/h) % 31 31
Gradeability with load % 35 37
Gradeability without load % 31 31
46 Service brake air brakes / wet brakes air wet
47 Engine manufacturer/type Cummins QSB6.7 Cummins QSB6.7
48 Engine output, in accordance with ISO 14396 hp (kW) 155 (116) 155 (116)
ENGINE
53 Working pressure for attachments psi (bar) 2800 (193) 2800 (193)
54 Oil flow for attachments gpm (l/min) 26.4 (100) 26.4 (100)
CERTIFICATION: These Hyster® lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply
with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are
affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of
the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.
H190HD2 - H360HD2 MAST DIMENSIONS
220 (5600) 120 (3045) 277 (7073) 56 (1435) 39494 (17914) 39258 (17807) 39644 (17982) 41143 (18662)
236 (6000) 126 (3178) 293 (7430) 61 (1568) 40375 (18314) 40140 (18207) 40525 (18382) 42025 (19062)
255 (6500) 132 (3345) 313 (7930) 68 (1735) 41478 (18814) 41242 (18707) 41628 (18882) 43127 (19562)
275 (7000) 139 (3511) 332 (8430) 74 (1901) 42580 (19314) 42344 (19207) 42730 (19382) 44229 (20062)
LOAD (LBS)
U.S. CUSTOMARY U.S. CUSTOMARY
30,000 30,000
20,000
RATED LOAD VS.H210HD
LOAD CENTER
20,000 RATED LOAD VS.H210HD
LOAD CENTER
25,000 H190HD Standard Pin Carriage 25,000 Non-Sideshift Fork Positioning
H190HD Carriage
15,000 15,000
(LBS)
(LBS)
U.S. CUSTOMARY U.S. CUSTOMARY
30,000 30,000
RATED
RATED
20,000 H210HD 20,000 H210HD
10,000 10,000
LOAD
LOAD
25,000 H190HD2 25,000 H190HD2
15,000 15,000
(LBS)
(LBS)
5,000 5,000
RATED
RATED
20,000 H210HD2 20,000 H210HD2
10,000 10,000
0 0
RATED LOAD
RATED LOAD
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
15,000 15,000
5,000 5,000
LOAD CENTER (IN) LOAD CENTER (IN)
10,000 10,000
0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
5,000 5,000
LOAD CENTER (IN) LOAD CENTER (IN)
0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
RATEDLOAD
LOADCENTER
VS. LOAD(IN)
CENTER RATEDLOAD
LOAD CENTER
VS. LOAD(IN)
CENTER
Integral Sideshift Carriage & Apron Style Dual Function Sideshifting /
Sideshifting Fork Positioning Carriage Fork Positioning Carriage
U.S. CUSTOMARY U.S. CUSTOMARY
30,000
RATED LOAD VS. LOAD CENTER 30,000
RATED LOAD VS. LOAD CENTER
Integral Sideshift Carriage & Apron Style Dual Function Sideshifting /
25,000 Sideshifting Fork Positioning Carriage
H190HD 25,000 H190HD Fork Positioning Carriage
LOAD (LBS)
LOAD (LBS)
(LBS)
RATED
LOAD
(LBS)
5,000 5,000
RATED
RATED
RATED LOAD
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
15,000 15,000
5,000 5,000
LOAD CENTER (IN) LOAD CENTER (IN)
10,000 10,000
0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
5,000 5,000
LOAD CENTER (IN) LOAD CENTER (IN)
0 0
0 10 20 30 40 50 60 Conversion
70 80 Factor:
90 100 1.0” = 25.4 mm; 1 lb = 0.45
0 kg
10 20 30 40 50 60 70 80 90 100
LOAD (LBS)
U.S. CUSTOMARY H280HD U.S.H280HD
CUSTOMARY
35,000
25,000 35,000
25,000
RATED LOAD VS. LOAD CENTER
H250HD2 RATED LOAD VS. LOAD CENTER
H250HD2
30,000
20,000 Standard Pin Carriage 30,000
20,000 Non-Sideshift Fork Positioning Carriage
(LBS)
(LBS)
H230HD U.S.H280HD
CUSTOMARY
2 H280HD 2
U.S. CUSTOMARY
RATED
RATED
25,000
35,000
15,000 25,000
35,000
15,000 H230HD
(LBS)LOAD
(LBS)LOAD
H250HD2 H250HD2
20,000
30,000
10,000 20,000
30,000
10,000
H230HD2 H280HD2 H280HD2
RATED
15,000
25,000
5,000
H230HD2S RATED 15,000
25,000 H230HD2
5,000
10 30 50 70 90 100 H230HD2S
RATED LOAD
0 20 40 60 80 100
10 20 30 50 70 90
RATED LOAD
0 40 60 80
10,000
20,000 LOAD CENTER (IN) 10,000
20,000 LOAD CENTER (IN)
H230HD2
5,000 H230HD2S
15,000 5,000 H230HD2
15,000
0 10 20 30 40 50 60 70 80 90 100
0 10H230HD
20 2S 30 40 50 60 70 80 90 100
10,000 LOAD CENTER (IN) 10,000 LOAD CENTER (IN)
5,000
5,000
0 10 20 30 40 50 60 70 80 90 100
0 10 20 30 40 50 60 70 80 90 100
RATED LOAD VS. LOAD CENTER RATED LOAD VS. LOAD CENTER
LOAD CENTER (IN) LOAD CENTER (IN) /
Integral Sideshift Carriage & Apron Style Dual Function Sideshifting
Sideshifting Fork Positioning Carriage Fork Positioning Carriage
U.S. CUSTOMARY U.S. CUSTOMARY
35,000 RATED LOAD VS. LOAD CENTER 35,000 RATED LOAD VS. LOAD CENTER
Integral Sideshift Carriage & Apron Style Dual Function Sideshifting /
H250HD
30,000 Sideshifting Fork Positioning Carriage 30,000 H250HD Fork Positioning Carriage
LOAD (LBS)
LOAD (LBS)
U.S. H280HD
CUSTOMARY U.S. CUSTOMARY
35,000
25,000 RATED LOAD VS. LOAD CENTER 35,000
25,000 RATED LOAD VS. LOAD CENTER
H280HD
Integral
H250HD2 Sideshift Carriage & Apron Style Dual Function Sideshifting /
30,000 30,000 H250HD2
20,000 Sideshifting Fork Positioning Carriage 20,000 Fork Positioning Carriage
(LBS)
(LBS)
U.S. CUSTOMARY
H280HD2 U.S. CUSTOMARY
RATED
RATED
25,000
H230HD 25,000 H230HD H280HD2
35,000
15,000 35,000
15,000
(LBS)LOAD
(LBS)LOAD
H250HD2
20,000
30,000 20,000
30,000 H250HD2
10,000 10,000
H230HD2 H280HD2
RATED
RATED
H230HD2
15,000
25,000 H230HD2S 15,000
25,000 H230HD2S H280HD2
5,000 5,000
RATED LOAD
RATED LOAD
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
10,000
20,000
LOAD CENTER (IN) 10,000
20,000
LOAD CENTER (IN)
H230HD2 H230HD2
5,000
15,000 H230HD2S 5,000
15,000 H230HD2S
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
5,000 5,000
0 10 20 30 40 50 60
Conversion
70 80
Factor:
90 100
1.0” = 25.4 mm; 1 lb = 0.45
0
kg
10 20 30 40 50 60 70 80 90 100
RAT(
U. S. CUSTOMARY
RATED LOAD
M
25,000
15,000 M
R
Hyster H300HD2 -H360HD2 Lift
10,000 Truck Rated Capacities
20,000 H300HD
M
•
M
Hyster H230-280HD Lift Truck 15,000
Rated Capacities
0 10 20 30 40 50 60 70 80 90 100
LOAD CENTER (IN)
•
R
Model H300HD2: 30,000 lbs. at 24” (13,608 kg at 600 mm) load center. •
Model H330HD2: 33,000 lbs. at 24” (14,969 kgLOAD
at 600 10,000 H330HD
40,000
RATED vs.mm) load center. 0 10 20 30 40 50 60 70 80 90 100
Model H360HD2: 36,000 lbs. at 24” (16,329
LOADkg at 600 mm) load center.
CENTER •
C
35,000 LOAD CENTER (IN)
LOAD (LBS)
Non-Sideshift Fork
Rated capacities are for trucks equipped with: Carriage
Positioning H360HD S•
40,000 H330HD
30,000
• VISTA mastRATED
® LOAD(5400
to 212.0” VS. LOAD
mm)CENTERRATED
(H300-360HD LOAD vs. RATED LOAD VS. LOAD CENTER
U. S. CUSTOMARY 2) maximum fork height H
• 98.5” (2,502 mm) (H300-360HD
Standard Pin Carriage LOAD CENTER
2) carriage 25,000
35,000 Non-Sideshift Fork Positioning Carriage cC
U.S. CUSTOMARY ) long forks as required
• 72.0” (1,829 mm) (H300-360HD s
(LBS)
2 Non-Sideshift Fork U.S. CUSTOMARY
H360HD Sa
RATED
35,000
Positioning Carriage 35,000
30,000 H300HD
20,000
Contact30,000
your dealer
H250HD for other capacity information.
U. S. CUSTOMARY H250HD H
m
RATED LOAD
30,000
25,000 cp
15,000
RATED LOAD (LBS)
SPECIFICATIONS
20,000
10,000
H300HD 25,000 pa
RATED LOAD VS. LOAD CENTER 0 10 20LOAD
RATED 30 VS.40 LOAD
50 60CENTER m
Lift Truck Rated Capacities
Non-Sideshift Fork Positioning Carriage 20,000 Standard 15,000
Features
Integral and
Sideshift Options
LOAD CENTER (IN)Style
70 80 90 100
Carriage/Apron 20,000
p
pm
H230HD
U.S. CUSTOMARY Sideshifting Fork Positioning Carriage 3i
Hyster H300-360HD Hyster H190-360HD
SPECIFICATIONS
15,000 U.S. CUSTOMARY
10,000 H230HD 15,000 pm
40,000 H330HD CAPACITY 40,000 0 10 20 30 40 50 60 70 80 90 100 pm
RATED LOAD vs. Standard Features
Lift Truck Rated Capacities 618 and Options
H330HD
2
10,000
Model H190HD: 19,000 lbs. at 24” (8 LOADkg atCENTER
600 mm) load center.
(IN) 10,000
2
m s
35,000 LOAD CENTER Model H210HD: 21,000 35,000lbs. at 24” (9 525 kg at 600 mm) load center. ip
(LBS)LOAD (LBS)
LOAD (LBS)
5,000 H360HD2 Integral Sideshift Carriage /
Model H230HD: 23,000 lbs. at 24” (10 433 kg at 600 mm) load center.
5,000 mS
0 10 20 30 40 50 60 70 Apron
80 90Style
100 Sideshifting Fork
30,000 H330HD
40,000 CAPACITY
Model H250HD: 25,000 40,000
30,0000 10
lbs. 20 30
at 24” (11 34040kg at 50 H360HD
60060
mm) 70 2 80
load center.90 100
RATED LOAD
LOAD CENTER (IN) Positioning vs.
Carriage H330HD m C
24”LOAD CENTER (IN)
25,000
35,000
LOAD CENTER Model H190HD:
U. S. CUSTOMARY
H280HD: 28,000 19,000 lbs.
25,000lbs.
35,000
lbs. atat 24” (8
(12618701kgkg atat600600mm)mm) load
loadcenter.
center. s
Model H210HD:
H300HD: 30,000 21,000 lbs. atat 24”
24” (9(13525608kgkgatat600 600mm) mm)load loadcenter.
center. pO
(LBS)
RATED
Model H280HD: 28,000 lbs. at 24” (12 701 kg at 600 mm) load center. &
25,000 U. S. CUSTOMARY 25,000
15,000 Rated capacities
Model H300HD: are 15,000
for truck
30,000 lbs. atequipped
24” (13 608 with:kg at 600 mm) load center. O f
• VISTA
Model mast to33,000
H330HD:
®
212.5” (5 lbs.398 mm)(14(H190-210HD),
at 24” 969 kg at 600213.0” mm) load (5 411mm)
center. Ll
H300HD
10,000
20,000 RATED LOAD VS. LOAD CENTER (230-280HD),
Model H360HD: 212.5” 20,000
10,000
36,000 (5lbs. RATED
398mm) LOAD
(H300-360HD)
H300HD
at 24” (16 329 kg VS.at 600
LOAD mm)CENTER
maximum forkcenter.
load height bw
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
Integral Sideshift Carriage & Apron Style • 92.5" (2 350 mm) (H190-280HD) Dual& Function
98.5” (2 502 Sideshifting
mm) (H300-360HD) / & s
15,000 LOAD CENTER (IN)
Sideshifting Fork Positioning Carriage Rated capacities are15,000
carriage for truck equipped ForkLOAD with: CENTER
Positioning Carriage (IN)
fs
U.S. CUSTOMARY 48.0" (1mast
• VISTA ®
to 212.5”
219 mm) (5 398 mm)
(H190-280HD) (H190-210HD),
& 72.0” U.S.(1CUSTOMARY
829 mm) 213.0” (5 411mm) long
(H300-360HD) lt
40,000
10,000 35,000
RATED LOAD VS. LOAD CENTER
H330HD (230-280HD),
forks as required 10,000
40,000
212.5”
35,000 (5 RATED LOAD VS. LOAD CENTER
398mm) (H300-360HD) maximum fork height
0 10 20 30 40 50 60 70 80 90 RATED100 LOAD vs. 0 10 20 30 40 50 60 70 80 90 100 w/
Non-Sideshift Fork Positioning Carriage • 92.5"your
Contact (2 350 mm)
dealerDual for(H190-280HD)
other H330HD
Function capacity & information.
98.5” (2 502 mm)
Sideshifting/Fork (H300-360HD)
Positioning
35,00030,000
H250HD
LOAD CENTER (IN) LOAD CENTER carriage 30,000 35,000 H250HD LOAD CENTER (IN) Carriage sv
U.S. CUSTOMARY U.S. CUSTOMARY es
(LBS)LOAD (LBS)
LOAD (LBS)
RATED LOAD (LBS)
axle • air with air system drier • 212.5” (5 398 mm) H360HD
2-stage no FL VISTA® •
RATED
20,000 15,000
30,000 Fork Positioning Carriage H230HD
2
p
Hyster 30,000
20,000
15,000 H300HDwith:
mast •H190-360HD
92.5” (2 350trucks are equipped
mm) (H190-280HD), 98.5”low-emissions,
(2 502 mm) Cummins (H300-360HD) turbo- hf
RATED LOAD
RATED LOAD
U. S. CUSTOMARY
25,000 charged
pin-type diesel
carriage engine
• •
48.0” 70
(1 amp
219 alternator
mm) •
(H190-280HD) overhead , exhaust
72.0” (1 •
829 Hyster
mm) 3-
(H300- ps
15,000 10,000 25,000
15,000
10,000
speed
360HD)autoshift
forks •transmission
2 brake w/backup • telescopic,
lights •tiltpullersteering
enginewheel
fan • • planetary
MONOTROL™ drive i
SPECIFICATIONS
riage /
ing Fork mirrors,
SuperLugmanual operator
off road compartment•side
tires (300-360HD) tilt forairservice
integral precleaneraccess, isolated
• U.L.
30,000
40,000 H360HD Conversion Factor: 1.0”mounting,
= 25.4 mm; 1 lb =for0.45 kg entry and exit, mechanical full suspension vinyl 26
H330HD Classificationhandrails
D operator
seat, floormat • load sensing steering • parts manual • 10.00 x 20-20 PR
25,000 25
H190HD2 - H360HD2 SPECIFICATIONS
MODEL A B C D E F G
in. (mm) in. (mm) in. (mm) percent in. (mm) in. (mm) in. (mm)
H190HD2 116.8 (2967) 119.4 (3033) 72.3 (1837) 70.0% 25.7 (653) 31.8 (809) 46.5 (1181)
H210HD2 116.8 (2967) 119.4 (3033) 72.3 (1837) 70.0% 25.7 (653) 31.8 (809) 46.5 (1181)
H230HD2 116.8 (2967) 119.4 (3033) 72.3 (1837) 75.0% 25.7 (653) 31.8 (809) 46.5 (1181)
H250HD2 116.8 (2967) 119.4 (3033) 72.3 (1837) 75.0% 25.7 (653) 31.8 (809) 46.5 (1181)
H280HD2 116.8 (2967) 119.4 (3033) 72.3 (1837) 75.0% 25.7 (653) 31.8 (809) 46.5 (1181)
H300HD2 118.0 (2990) 120.6 (3064) 74.7 (1899) 86.9% 26.9 (684) 31.8 (809) 46.5 (1181)
H330HD2 118.0 (2990) 120.6 (3064) 74.7 (1899) 86.9% 26.9 (684) 31.8 (809) 46.5 (1181)
H360HD2 118.0 (2990) 120.6 (3064) 74.7 (1899) 86.9% 26.9 (684) 31.8 (809) 46.5 (1181)
H190-210HD2 (2-Stage) 28.5 (725) 30.5 (775) 30.9 (785) 30.9 (785) 32.9 (836)
H190-210HD2 (3-Stage) 34.8 (885) 34.8 (885) 35.9 (911) 35.9 (911) N/A
H230-280HD2 (2-Stage) 29.9 (760) 31.9 (810) 32.2 (819) 32.2 (819) 33.9 (861)
H230-280HD2 (3-Stage) 34.8 (885) 34.8 (885) 35.9 (911) 35.9 (911) N/A
H300-360HD2 (2-Stage) 33.9 (862) 33.9 (862) 35.3 (896) 35.3 (896) 37.4 (949)
H300-360HD2 (3-Stage) 36.9 (937) 36.9 (937) 39.8 (1012) 39.8 (1012) N/A
MASTS ENGINE
Mast with nested channels provide excellent Cummins QSB 6.7Liter -155 hp Tier 3 compliant
visibility of the attachment and load. Pre-lubed engine features:
and sealed load rollers resist load forces. • 4 cycle; 6 cylinders; 409 cu. in. (6702 cm3)
displacement
CARRIAGES • Maximum torque is 440 ft.lbs. (597 N•m) at
Pin-type; integral pin-type fork positioner with 1,500 RPM
simultaneous or individual fork control; pin-type • Turbocharged and intercooled for maximum
integral sideshift; integral pin-type dual function efficiency
sideshift fork positioner; apron style sideshift fork • U.L. Classification D
positioner with simultaneous or individual fork • 4.02” (102 mm) bore
control. • 4.72” (120 mm) stroke
• Engine compartment features gull-wing doors
Overall width: 98.11” (2,492 mm) for the H190- for easy service access
280HD2. Overall width for the H300-360HD2 is
102.62” (2,667 mm) TRANSMISSION
• Exclusive Hyster TE-10 three-speed, fully-
Minimum inside-to-inside fork spacing - model reversing powershift transmission produces
and attachment dependent: ranges from 2.9” - smooth shifting, precise inching and fast
5.5” (75 mm - 140 mm) acceleration
• Cushioned clutch lock-up provides smooth
Maximum outside-to-outside fork spacing - model shifting and dampens drive line shock loads
and attachment dependent: ranges from 85.6” - • Standard steer column mounted lever provides
95.2” (2,176 mm - 2,420 mm) the operator the option of manual shift
capabilities
FORKS • A dash-mounted indicator light displays
2.5” x 8.0” x 48.0” - 60.0” (64 x 203 x 1,219 - 1,524 transmission mode status
mm) pallet forks for H190-210HD2 • A premium ZF WG161 transmission option is
2.5” x 8.0” x 48.0” - 72.0” (64 x 203 x 1,219 - 1,829 available for additional travel speed, drawbar
mm) pallet forks for H190HD2 pull, or for use in rugged applications
3.0” x 8.0” x 48.0” - 96.0” (76 x 203 x 1,219 - 2,438 HYDRAULIC SYSTEM
mm) pallet forks for H190-280HD2 • 3,050 PSI (21.0 mPa) hydraulic lift system;
3.0” x 8.0” x 48.0” - 72.0” (76 x 203 x 1,219 - 1,829 2,400 PSI (16.5 mPa) relief pressure in all
mm) polished and tapered forks for H190- auxiliary valve variations
280HD2 • Electro proportional hydraulic control valve
2.75” x 8.0” x 48.0” - 96.0” (70 x 203 x 1,219 - sections allow precise metering of hydraulic
2,438 mm) dual function sideshifting fork functions
positioner forks for H190-280HD2 • “O” Ring Face Seal hydraulic fittings are used
throughout the hydraulic system
3.5” x 8.0” x 72.0” - 96.0” (89 x 203 x 1,829 - 2,438
mm) pallet forks for H300-360HD2
Standard Features and Options