RF 2.4G Wireless Air mouse
User Manual
1. Introduction
This product is a double-sided remote controller with the combined function of mouse, full
keyboard and android remote control. With using this product. peopie can easily operate
their devices of PC, android TV Box, smart TV and set-up box. The operating system of
that device can be Windows, Mac, Windows or Linux.
2. Product features
(1) Elegant and ergonomic, Classic double-sided, Full QWERTY keyboard design.
(2) Very low power consumption RF 2.4G technology, and very strong anti-interference
ability. LED indicator for connection status.
(3) Support for ow voltage: 3.3-4.5 V.
(4) Intelligent anti-jigger algorithm. The mouse cursor is operated smooth and stable.
3. Key definition
The function definition of the keys shall be:
(1) LED indicator
(2) Volume -
(3) Volume +
(4) Power On/Off
(5) Up
(6) Down
(7) Left
(8) Right
(9) Mouse_L when Mouse function is On. (“Enter” when Mouse function is switched off)
(10) Mouse_R (Long press for 2 seconds to Home )
(11) menu
(12) = Mouse switch: press one times of the button, tum mouse function On/Off
s
2, Keep pushing g button to open microphone, release close the
microphone. Support wireless microphone call, voice search need to install
driver software
Remarks: There are two versions of the machine4. Specification
With using advanced 6 axes solution of 3 axes G-Sensor + 3 axis Gyroscope sensor.
RF 2.4 GHz wireless communication.
Operating distance up to 8 to 10 meters.
Frequency Range: 2402~2483MHz.
Working current < < 15 mA
Sleep current < < 30 uA
Rechargeable lithium battery.
Bi-color (red and blue) indication LED.
Remote control size 160 * 48° 14 mm (length * width * height)
Weight: 75 9
USB type: USB2.0
System: Compatible with Windows, Mac OS, Linux, Android.
5. Sleep and wake up
Advanced low power design. When there is no any operating onto the remote for 20
seconds it will enter to sleep mode. User can wake it up by operating any key.
6. Notice
(1)Low battery warning: when the battery is low, the Red LED light appeared slow flash
in a row. ise charge as soon as possible
(2) indication LED
In this product, there is a red and blue bi-color LED to indicate the status. blue LED for
connection and working status, and Red LED for charging status.
Red LED:
Constantly ON: Charging is on-going.
OFF: Charging is completed.
Kindly not
(1)Thanks to our product is produced with 6-axis gyroscope, it cannot accurately
positioned when putting it in different environment, falling down from a high palce, and
lacking of power. Then caused the drifting problem of the Air mouse pointer.
Regarding this matter, pls recharge and recalibrate it.
un-stablize move. Press “OK"+" Retum’for 3 seconds.simply
place the remote on an even surface for a few seconds until the cursor stablized then
calibration is done.
(2) Pairing :
1, press “volume +” continuously the press “volume -” buttons on side A when
the LED will be flicking, pair mode is on.
2,Plug USB dongle into and wait about 3 seconds, LED will stop flicking, then pairing
is successful.
(3)Cursor speed regulation:
From slow to fast: Press OK and Volume + button, blue light twinkle, cursor speed
faster after the light off
From fast to slow: Press OK and VOIUME - button, blue light twinkle, cursor speed
slower after the tight off.
(4) Press “Fn‘one times, the F1-F10 and punctuation symbol! will be locked, and press
“Fn‘again, it will be released