Professional Documents
Culture Documents
ESP8285
From ElectroDragon
Share
Contents
1 Breakout Board
1.1 Schematic
2 Embedded Soldering
2.1 Firmware note
2.2 Reference Link
3 Documents
Breakout Board
Front pins: GPIO12 GPIO13 GPIO14 GPIO4 GPIO5 GPIO15
Back pins: GPIO16 GPIO0 GND TX RX VCC
Pin arrangement for default firmware:
Schematic
Embedded Soldering
01 02
Firmware note
Change SPI mode to DOUT, flash to 8MBit, should esp8266 normal at commands firmware or nodemcu, mostly same.
Reference Link
Documents
esp8285_datasheet_en_V1.3
https://www.electrodragon.com/w/ESP8285 1/2
10/24/2018 ESP8285 - ElectroDragon
https://www.electrodragon.com/w/ESP8285 2/2