To print this pattern and instructions, you will need 7 sheets of legal sized paper (8 1%” X 14”)
@ Make sure this PDF is printed to “actual size”!
Failure to do so will cause your patter pieces to print too small!
Notes:
5/8” seam allowance has been added to all pieces. For best results, trim facing seam allowances
and press all seams open or flat (depending on the type of seam.) Precutting your pattern pieces
will help prevent confusion later. Take your time with this pattern! There are a lot of pieces but if
you take your time, you will likely have better results.
This pattern has been slightly modified a
from the original created by Kathy van Beuningen
and seam allowances have been added.
Size Guide (finished measurements): Side View $A
Inner Front View
Isize__| Gircumference|_Height
X-Small] 22 1/4" ects
[Small 223i vc NO
IMedium| 24" : Oo x
Large ral ¢ L NC
Ifyou are between sizes, 7 aa \
use the next sizeup. 7 a ~. XN
’ a ™N \
Imperial Officer Hat
Top \
Fabric: Cut 1
Lining: Cut 1
Facing: Cut 1
5/8” Seam Allowance
Original Pattern by Kathy van Beuningen Pattern modifications by Janet Ballweber
Email: kvanb@prodigy.net Email: jan@cyberseams.com
www.midwestgarrison.com Web: www.cyberseams.comOriginal Pattern by Kathy van Beuningen Pattern modifications by Janet Ballweber
Email: kvanb@prodigy.net Email: jan@cyberseams.com
www.midwestgarrison.com Web: www.cyberseams.comImperial Officer Hat
Crown
Fabric: Cut 2
Lining: Cut 2
Facing: Cut 2
\
A
5/8” Seam Allowance
Imperial Officer Hat
Crown
Fabric: Cut 2
Lining: Cut 2
Facing: Cut 2
\
\_
5/8” Seam Allowance
SS
=e
Original Pattern by Kathy van Beuningen Pattern modifications by Janet Ballweber
Email: kvanb@prodigy.net Email: jan@cyberseams.com
www.midwestgarrison.com Web: www.cyberseams.com