Television system
Channel coverage
Picture tube
Antenna
Input
Output
‘Tape Spoed
Maximum
Recordingiplayback
time.
Speaker output
KV-13VM20 /20VM20
SERVICE MANUAL
RM-Y126
US Model
kv-13vM20
Chassis No. SCO-HT6A-A
kv-zovm20
Chassis No. SCC-H168-A
Canadian Model
kv-1avM20
Chassis No. SCC:HISB-A
KV-20VM20
Chassis No, SCC-HI5C-A
MODELS OF THE SAME SERIES
KV-13VM20 KV-20VM20
‘SPECIFICATIONS
‘American TV standard, NTSC COLOR
VHE: 219,
URE: 14-69)
CABLE TV: 1-125
MrGNSEE Trntrone tube
$9/inch picture measured diagonally
‘inch picture tube measured dagonaly
kvzovkizo
Tantron® Tube
20'inch picture measured diagonally
21-inch picture tube measured diagonally
750 external antenna terminal for
VHF/UHF F-TYPE
Video (phono jack): 1 Vp-p, 75-ohms
Unbalanced negative syne
‘Audio (phone jack): 400 mvs (100%
modulation) Impedance: 47 ke, Monaural
Earphone Jack
SP: 33.35mmisec
LP: 16.67mmisoc
EP: 11.12mm/sec
@hours in EP mode
eswxt
Speaker Size 68x 4.tomx1
‘Audio frequency _50Hz-20KHz
response
Power requirements 120V AC, 60Hz
Power consumption KV-13VM20: B5W(Standby mode 5 W)
KV-20VM20: 100WV(Stanaby mode 7 W)
Fastforward and Approx. 4min 30sec (T-120 Tape)
‘ewind time
Dimensions (wins) KV-19VM20: 15°" x 168" 15+
betes) 390 x 416 x 384 mm
kv-20ve0: 20" 20°" 3 19"
331x811 482 mm
Weight kv-ravazo:
Net: 14,65KG (82, ts)
Gross: 16.684 (0.7bs)
Kv-2nvieo:
Net: 28.34g (624 tho)
Gross; 30K (6.1 Ibs)
Supplied accessories Remote Commander RM-Y126 (1)
with 1 AA size (RE) battery
Antenna Adapter (1)
TRINITRON. COLOR VIDEO TV
SONY.Kv-13VM20/20VM20
RM-Y126
GEAR R
\
SPRING, ,
GEAR (L)
GEAR C
SPRING CC
SWITCH SPRING
IN
SWITCH LEVER: SPRING CUSHION
SHAFT D. ‘SPRING R.
Fig. A-9-1 Drive Gear Assembly
+ NOTE
1) When reassembling, seat the projections of Gear Rin the
holes of GearC when the projection of Gear Ris aligned
with the hole of Gear C and then keep the Gear C turned me
inthe clockwise direction
9-6. Gear RiFig. A-9-1)
1) Liftup the Gear R from the Shaft
9-7. Spring FiFig. A-9-2)
1) Remove the Spring R by releasing Hooks
* NOTE
1) When reassembling, be certain Spring Rin the parti) of
Gear R
9-8, Gear LFig. A-9-1)
1) Remove the Gear L from the shaft
9-9, Spring L (Fig. A-9-2)
1) Remove the Spring L by releasing Hooks frorn the Gear
L
* NOTE: (Refer to the Spring A Section)
Fig. A-9-2 Spring R
9-10. Switch Lover(Fig. A-9-1)
1) Remove the Switch Lever from the shaft9-2. DECK MECHANISM
+ Deck Mechanism Parts Location
KV-13VM20/20VM20
RM-Y126
Top Side
AUTO HEAD CLEANER ASSEMBLY:
DRUM BASE. :
DRUM ASSEMBLY —}
FULL ERASE HEAD:
ASSEMBLY
2, P3 SLANT:
ASSEMBLY
TENSION ARM 14
ASSEMBLY
‘SUPPLY REEL.
ASSEMBLY
A/C HEAD ASSEMBLY
LOADING MOTOR,
ASSEMBLY
— PINCH LEVER,
‘ASSEMBLY
TAKE-UP REEL
ASSEMBLY
BRACKETF 8.
‘ASSEMBLY
“IDLER GEAR AB
Bottom Side
CAPSTAN MOTOR:
ASSEMBLY
BOTTOM BRAcKET—
ASSEMBLY
MODE SWITCH:
PULLEY GEAR.
ASSEMBLY
FUNCTION PLATE:
LOADING GEAR,
‘ASSEMBLY
JUNCTION P C8
ASSEMBLY
CLUTCH GEAR
"ASSEMBLY