ASME B31.3
INTERPRETATIONS NO. 14
Replies to Technical Inquiries
April 1, 1995, Through March 31, 1996
General Information
thas been agreed to publish interpretations issued by the B31 Committee concerning B31.3 as part
of the update service to the Code. The interpretations have been assigned numbers in chronological order.
Each interpretation applies to the Edition or Addenda stated in the interpretation, or if none is stated,
to the Edition or Addenda in effect on the date of issuance of the interpretation. Subsequent revisions
to the Code may have superseded the reply, These interpretations are not part of the Code or its
Addenda.
These replies are taken verbatim from the original letters, except for @ few typographical and
editorial corrections made for the purpose of improved clarity. In some instances, a review of the
interpretation revealed a need for corrections of a technical nature. In these cases, a revised reply bearing
the original interpretation number with the suffix R is presented.
ASME procedures provide for reconsideration of these interpretations when or if additional infor-
mation is available which the inquirer believes might affect the interpretation. Further, persons aggrieved
bby an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the
Statement of Policy in the Code documents, ASME does not “approve,” “certify,” “rate,” or “endorse”
any item, construction, proprietary device, or activity.
For detailed instructions on preparation of technical inquiries to the B31 Committee, refer to
Appendix Z.
Code Reference and Subject Indexes
Code Reference and Subject Indexes have been prepared to assist the user in locating interpretations
by location or by subject matter in the Code. They cover interpretations issued from Volume 1 up to
and including the present volume, and will be updated with each volume
aaaB31.3
Subject
Fig. 3232.2, Minimum Temperatures Without Impact Testing for Carbon Stet Materials
Maximum Allowable External Loads
Para, 3002 Definitions
Para 302224, Design Ceteia Allowances for Presure and Temperature Variations, and Para
322.63), Pressure Relioving Devices... aoe 7
Para. 3043.3 Reinforcement of Welded Branch Connections
Para. 328.2 Welding Qualifcaions
Para. 3282.2(@), Procedure Qualification by Others
Para, 3284.3, Preparation for Welding Alignment
Para 3311.3) and Table 3311.1, Heat Treatment Requirements
Para, 34.3.3 Defective Components and Workmanship
Para, A308 1.1 (a), Pressure Design of Nonmetalic Piping Components
Para AS04111 (a), Presure Design of Nonmetlic Piping Components
Pera. K204.1.2 Straight Pipe Under Internal Presure
‘Table 3232.2, Minimum Temperatures Without Impact Testing for Carbon Stel Materials
Table 35.1.1, Postweld Heat Treatment
Table 3813.2 Acceptance Criteria for Weids
Table 361324 Acceptance Criteria for Welds
‘Table 341.3.2A Acceptance Criteris for Welds
File No.
Bs195.010
B31-95.007
B31-95-002
B31-95.012,
BBLS.
3198-005,
31-98-05,
B31-98-003,
B1-96.064
B31-98.032
1B31.95.057
BBI95-058,
BBL95-016
BBL-95018,
195.036
31.98.00!
B31-98.009,
BBLS034
159