Professional Documents
Culture Documents
P/N: 48001-1101
Copyright
© 2015, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: 48001-1101
Release:
Commit: 22369
Language: en-US
Modified: 2014-12-19
Formatted: 2015-01-11
General description
Corporate Headquarters
FLIR Systems, Inc. The FLIR A315 has features and functions that make it the natural choice for anyone who uses PC
27700 SW Parkway Ave. software to solve problems and for whom 320 × 240 pixel resolution is sufficient. Among its main
Wilsonville, OR 97070 features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with
USA software packages such as IMAQ Vision and Halcon.
Telephone: +1-503-498-3547 Key features:
Website
http://www.flir.com • Affordable.
• GigE compliant.
Customer support
• GenICam compliant.
http://support.flir.com • Trigg/synchronization/GPIO.
Disclaimer • 16-bit 320 × 240 pixel images at 60 Hz, signal, temperature linear, and radiometric.
• Compliant with any software that supports GenICam, including National Instruments IMAQ Vision
Specifications subject to change without further
and Stemmers Common Vision Blox.
notice. Camera models and accessories subject
• Lenses: 25° included, 15° and 45° optional.
to regional market considerations. License
procedures may apply. Products described herein Typical applications:
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any • High-end infrared machine vision that requires temperature measurement.
questions. • Slag detection.
• Food processing.
• Electronics testing.
• Power resistor testing.
• Automotive.
Detector data
Detector type Focal Plane Array (FPA), uncooled
microbolometer
Spectral range 7.5–13 µm
Detector pitch 25 µm
Detector time constant Typical 12 ms
1 (12) www.flir.com
FLIR A315
Measurement analysis
Atmospheric transmission correction Automatic, based on inputs for distance,
atmospheric temperature and relative humidity
Ethernet
Ethernet Control and image
Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,
ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),
uPnP
Digital input/output
Digital input, purpose Image tag (start, stop, general), Image flow ctrl.
(Stream on/off), Input ext. device
(programmatically read)
Power system
External power operation 12/24 VDC, 24 W absolute max
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data
Operating temperature range –15°C to +50°C (+5°F to +122°F)
2 (12) www.flir.com
FLIR A315
EMC
• EN 61000-6-2:2001 (Immunity)
• EN 61000-6-3:2001 (Emission)
• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 40 (IEC 60529)
Physical data
Weight 0.7 kg (1.54 lb.)
Shipping information
EAN-13 7332558003374
UPC-12 845188003128
Country of origin Sweden
3 (12) www.flir.com
FLIR A315
4 (12) www.flir.com
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
2
0,94in
24mm (3x)
1,38in
35mm
0,47in
3
3
1,31in 12mm (3x)
33,3mm (2x)
Camera with built-in IR lens f=18 mm (25°)
0,11in
2,9mm
1,29in
32,7mm (3x)
4
4
M4 (6x)
5
5
6,76in
172mm
7,16in
182mm
UNC 1/4-20 (3x)
6
6
7
7
1,38in
35mm
8
-
2,76in
70mm
-
Modified
Denomination
2012-04-18
Check
CAHA
1,31in
33,3mm
9
Drawn by
2,76in
70mm
R&D Thermography
Scale
1:1
A3
Drawing No.
10
T125002
Size
Sheet
A
1(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
2
0,94in
24mm (3x)
2,68in 1,62in
68mm 41,3mm
1,31in 0,47in
33,3mm (2x) 12mm (3x)
3
3
Camera with Lens IR f=4 mm (90°) incl support
4
4
3,36in
85,4mm
3,55in
90,1mm
4,65in
118,1mm
Optional
Lens support
5
5
10,41in
264,4mm
6
6
M4 (6x)
6,76in
172mm
UNC 1/4"-20 (3x)
7
7
8
-
Modified
Denomination
2012-04-18
Check
CAHA
9
Drawn by
3,25in
82,5mm
R&D Thermography
1,62in
41,3mm
Scale
1:1
A3
1,31in
Drawing No.
33,3mm
10
2,76in
70mm
T125002
For additional dimensions see page 1
Size
Sheet
A
2(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
0,94in
2
24mm (3x)
1,38in
1,85in 35mm
47mm
0,47in
1,31in 12mm (3x)
33,3mm (2x)
Camera with Lens IR f=10 mm (45°)
3
3
1,33in
34mm
1,51in
38,4mm
2,62in
66,4mm
4
4
M4 (6x)
8,37in
213mm
6,75in
171mm
5
5
UNC 1/4"-20 (3x)
6
6
7
7
1,38in
35mm
8
-
Modified
2,76in
70mm
Denomination
2012-04-18
Check
CAHA
1,31in
9
33,3mm
Drawn by
2,76in
70mm
R&D Thermography
Scale
1:1
A3
Drawing No.
10
T125002
For additional dimensions see page 1
Size
Sheet
A
3(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
2
0,94in
24mm (3x)
1,38in
2,28in
35mm
58mm
0,47in
Camera with Lens IR f=30 mm (15°)
3
0,77in
20mm
0,95in
24,3mm
2,06in
52,3mm (3x)
4
4
M4 (6x)
7,82in
199mm
6,75in
171mm
5
5
UNC 1/4"-20 (3x)
6
6
7
7
1,38in
35mm
2,76in
70mm
8
-
Modified
Denomination
2012-04-18
1,31in
33,3mm
Check
2,76in
CAHA
70mm
9
Drawn by
R&D Thermography
Scale
1:1
A3
Drawing No.
10
T125002
For additional dimensions see page 1
Size
Sheet
A
4(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
2
3,78in
96mm
3,48in
1,89in 88,5mm
48mm (2x)
2,14in
3
1,31in 54,3mm
33,3mm (2x)
Camera with Lens IR f=76 mm (6°) incl support
Optional
Lens support
4
4
3,98in
4,17in
101,1mm
105,8mm
Optional
Base support
5
5
2,15in
54,5mm
45mm ±0,1
1,77in ±0,00
4,29in
109mm
90mm ±0,1
3,54in ±0,00
11,03in
280mm
6
6
6,76in
172mm
UNC 1/4"-20 (5x)
7
7
8
-
Modified
1,89in
Denomination
48mm
2012-04-18
Check
CAHA
9
2,14in
54,3mm
Drawn by
1,38in
35mm
R&D Thermography
2,76in
4,27in
70mm
108,5mm
Scale
1:1
A3
Drawing No.
10
0,31in
T125002
8mm
Size
Sheet
A
5(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
2,17in
55mm
0,94in
24mm (3x)
1,62in
41,3mm
Object plane
0,47in
12mm (3x)
2
2,68in
68mm
0,83in
WD = 21mm
3
3
Camera with Close-up lens 1X (25 µm) incl support
6,38in
162mm
6,56in
166,8mm
4
4
7,67in
194,8mm
1,31in
Optional
33,3mm (2x)
Lens support
5
5
13,43in
341mm
6
6
M4 (6x)
UNC 1/4"-20 (3x)
6,76in
172mm
7
7
8
-
Modified
Denomination
2012-04-18
2,76in
70mm
Check
CAHA
9
Drawn by
R&D Thermography
3,25in
82,5mm
Scale
1:1
A3
1,62in
Drawing No.
41,3mm
10
T125002
For additional dimensions see page 1
1,31in
Size
Sheet
33,3mm
A
6(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
Object plane
2
0,94in
2,17in 24mm (3x)
55mm 1,38in
35mm
1,31in
1,3in
0,47in
33,3mm (2x) 12mm (3x)
WD = 33mm mm
Camera with Close-up lens 2X (50 µm)
3
3
1,2in
30,5mm
1,39in
35,2mm
2,49in
63,2mm (3x)
4
4
8,25in
M4 (6x)
209,5mm
6,76in
5
5
172mm
UNC 1/4"-20 (3x)
6
6
7
7
8
1,38in
35mm
-
Modified
2,76in
70mm
Denomination
2012-04-18
Check
CAHA
1,31in
9
33,3mm
Drawn by
2,76in
70mm
R&D Thermography
Scale
1:1
A3
Drawing No.
10
T125002
For additional dimensions see page 1
Size
Sheet
A
7(8)
D
F
B
A
E
C
G
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.
Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.
B
A
H
E
F
D
G
1
1
Object plane
0,94in
24mm (3x)
2
2
3,11in
1,38in
35mm
2,17in
WD = 79mm mm
55mm
0,47in
1,31in 12mm (3x)
33,3mm (2x)
Camera with Close-up lens 4X (100 µm)
3
3
1,2in
30,5mm
1,39in
35,2mm
2,49in
63,2mm (3x)
4
4
M4 (6x)
8,25in
209,5mm
6,76in
172mm
UNC 1/4"-20 (3x)
5
5
6
6
7
7
1,38in
35mm
8
-
2,76in
70mm
-
Modified
Denomination
2012-04-18
Check
CAHA
1,31in
33,3mm
9
Drawn by
2,76in
70mm
R&D Thermography
Scale
1:1
A3
Drawing No.
10
T125002
For additional dimensions see page 1
Size
Sheet
A
8(8)
D
F
B
A
E
C