PAPER SIGNALS
‘allow the ontine instructions ot geolpaporsignals
PARTS REQUIRED ‘SCORING + FOLDING
Hactronic tuft
+ Micro serve Doshed tines incicate
+ Adattut Fectnor HUZZAH €S°8268 WIth noodors
+ Mero Use cable (eate-syncing)
+ Maloffemato jumper wires
+ Aphone withthe Googl Assistant
(Android or ios devices)
aparstutt
+ Prior
+ ax" paper (@0-00ocordstock)
+ Adhesive tas crying paper glue.« uo stick glue
dots or doubo-sided tape)
+ Sclsors and o erat trite
+ smallPilips-head serewciver
+ Empty mechanical pencte score flds
+ Ruorforeutting and scoring
[NOTE These ara the ports wo used but yo
‘inl sar ones thet wok just Wel
PRINTING
Prin at 100% scale. Make sure you are not sealing the
tomplate to it the paper.
[-__ —{_tistine should be one inch,
CUTTING
Roughly cut allof the pioces out of the shoot frst thon
{ge back and carefully cut along the sleek lines.
ts. and @ erat knife for
so scissors fr larg
intricate areas,
The Paper Signals will look best
if you tuly cutoff the black tine
‘round the coleres pieces,
valley fol
Dashes with dots
incicate mountain fol
Allfoldinos should be scored
Using an empty mechanical
pene and a ult
Most pointy objects work for scoring, Be careful th
‘you dontt pierce the paper while scoring. Gach score
Tine snoule leave an indent, but nat brook the surface,
Pre-fold allot the parts along dotted Ines to make
‘assembly easier.
oLuING
indicate where tas
ght groy creas on the templat
}oule be gliod down,
Use « small amount of glue to adhere each tab. Too
uch will warp the papor and toke longor to dry.
\Whhon ging follow the ontine instructions. Moke sure
that you are matching each tab number to 0
numbered tab landing location,
{Additional glue orcas aro highlighted blue in tho
inetructions,