SINGAPORE STANDARD
CP 29 : 1998
(ICS 13.220.30)
CODE OF PRACTICE FOR
Fire hydrant systems and
hese reels
crating Amendment No. 1, Novembs
Singapore Productivity and Standards Board
4 Science Park Drive
Singapore 118221 SINGAFORE
PSBSINGAPORE STANDARD
CP 29 : 1998
(ICS 13,220.30)
CODE OF PRACTICE FOR
Fire hydrant systems and
hese reels
(acerporating Amendment No. 1, November 1938)
All rights reserved. Unless otherwise speci
tendard may be reproduced of utilised in any form or by airy sears,
lectronic or mechanical, including photocopying and microfilming, without
permission in writing from PSB at the address below:
sd, no part of this Singapore
Singapore Productivity and Standards Board
4 Science Park Drive
Singapore 118221
ISBN 9971-67-653-2CP.29: 1998
This Singapore Standard having been approved by the Construction industry Practice Committee wars
endorsed by the Standards Council on 25 March 1998.
First published, 1984
First revision, 1998
The Construction Industry Practice Committee appointed by the Standards Council consists of the
following members:
Name Organisation
Chairman: MrLam Siew Wah Standards Council
Secretary: Ms Tan Sock Cheng Singapore Productivity and Standards Board
Members: Assoc Prof Ang Chee Kiong Institution of Engineers Singapore
Mr Boo Gook Kwang Singapore Civil Defence Force
Mr Chee Keng Yan Association of Consulting Engineers, Singapore
Mr Giam Siang Hai ‘Singapore Contractors Association Limited
Mi Ho Siong Hin Department of Industrial Safety
Er. Hui Beng Hong Institution of Engineers Singapore
Mr Paul Low Singapore Institute of Architects
‘Assoc Prof Gary Ung Khim Chye National University of Singapore
Mr Neo Poh Ke: Housing and Development Board
Mr Gilbert Tsn Peng Cheng Singapore ‘onfederation of Industres
Mr Tan Sievg Leng Public Works Departr-ent
‘Assoc Prof Yio ¥v: on Kwong Nanvang Technological University
Ce-cpted
Meml+s > Drdimmy Chen Wie Yiig Indnvidual Capac:
Driau Yat Sun Individual Capacity
Mr Teh Ker si Individual Capacity
‘The Technical Committee appointed by the Construction Industry Practice Committee and responsibie
for the preparation of this standard consists of representatives trom the following organisations:
Name