Professional Documents
Culture Documents
Version 1.0
NOTICE
This document contains information which is proprietary and confidential to Samsung Telecommunications
America (Samsung) and is protected by copyright. No information contained herein may be copied,
translated, transcribed, or duplicated by any method without the prior written consent of Samsung.
Samsung reserves the right to change information contained in this document without prior notice.
Samsung disclaims all warranties, either expressed or implied, including the warranties of merchantability
and fitness for a particular purpose. In no event shall Samsung be liable for any damages whatsoever
including direct, indirect, incidental, consequential, loss of business profits, or special damages, even if
Samsung is advised of the possibility of such damages. The preceding limitation may not apply in some
American states which do not allow the exclusion or limitation of liability for consequential or incidental
damages.
REVISION HISTORY
TABLE OF CONTENTS
1 TEST ITEMS....................................................................................................................6
1.1 THROUGHPUT....................................................................................................................................6
1.1.1 DL Cell Throughput (Max.)........................................................................................................................................6
1.1.1.1 Test conditions and requirements...........................................................................................................................6
1.1.1.2 Test procedure........................................................................................................................................................6
1.1.1.3 Pass/Fail criteria.....................................................................................................................................................7
1.1.2 UL Cell Throughput (Max.)........................................................................................................................................7
1.1.2.1 Test conditions and requirements...........................................................................................................................7
1.1.2.2 Test procedure........................................................................................................................................................7
1.1.2.3 Pass/Fail criteria.....................................................................................................................................................8
1.1.3 DL User Throughput (Ave.)........................................................................................................................................9
1.1.3.1 Test conditions and requirements...........................................................................................................................9
1.1.3.2 Test procedure........................................................................................................................................................9
1.1.3.3 Pass/Fail criteria.....................................................................................................................................................9
1.1.4 UL User Throughput (Ave.)......................................................................................................................................10
1.1.4.1 Test conditions and requirements.........................................................................................................................10
1.1.4.2 Test procedure......................................................................................................................................................10
1.1.4.3 Pass/Fail Criteria..................................................................................................................................................10
1.2 LATENCY.........................................................................................................................................11
1.2.1 Round Trip Time........................................................................................................................................................11
1.2.1.1 Test conditions and requirements.........................................................................................................................11
1.2.1.2 Test description....................................................................................................................................................12
1.2.1.3 Pass/Fail Criteria..................................................................................................................................................12
Appendix A – Acronyms.............................................................................................................................13
1 TEST ITEMS
1.1 Throughput
Two laptop computers to monitor the two UEs and two DM tools.
A location for test condition (Cell Near link condition) shall be predetermined in the single Cell
environment.
There is no throughput limit on the FTP server and backhaul.
System configuration is set to #2 UL - DL Configuration and #7 Special_subframe_configuration.
UEs and PCs are supported maximum throughput. (no limit)
If FTP is used, peak sector DL data rate shall be higher than 0.95 x acceptable ranges.
1. Locate the test UEs at a predefined place with near link condition in the single Cell environment.
2. The test point should be over the cell RF conditions. (RSRP: higher than -70dBm, SNR: higher than 30).
3. Connect the UEs to eNB. (Initial attachment)
4. Run FTP client at the PC and Connect to the FTP server.
1. Locate the test UE at a predefined place with near link condition in the single Cell environment.
2. The test point should be over the cell RF conditions. (RSRP: higher than -70dBm, SNR: higher than 30).
3. Connect the UE to eNB. (Initial attachment)
1.2 Latency
A vehicle for moving, a test UE, and a test laptop computer connected with GPS and the UE are
required.
2ms backhaul delay between eNB and EPC is assumed.
Assumes UE processing time = 1ms. (one way)
The network stability is certainly guaranteed.
The average round trip time shall be less than 40ms. (median of 95% tile)
Appendix A – Acronyms
DM Diagnostic Monitor
eNB E-UTRAN NodeB
EPC Evolved Packet Core
FTP File Transfer Protocol
GBR Guaranteed Bit Rate
KPI Key Performance Indicators
LTE Long Term Evolution
MIMO Multiple Input Multiple Output
MME Mobility Management Entity
OCNS Other Cell Noise Simulator
PCRF Policy and Charging Rules Function
PDN Packet Data Network
P-GW PDN Gateway
QCI QoS Class Identifier
RRC Radio Resource Control
RSRP Reference Signal Received Power
S-GW Serving Gateway
SIMO Single Input Multiple Output
SINR Signal to Interference and Noise power Ratio
TCP Transmission Control Protocol
UE User Equipment
UDP User Datagram Protocol