Open the �Qemu� tab. Open the �ASA� tab. Select the �Initrd� file. The filename I used was �asa802-k8.initrd.gz�. Press Open. Select the �Kernel� file. The filename I used was �asa802-k8.kernel�. Press Open. Hit the �Save� button. Press �Ok�. Click and drag an ASA Firewall to your topology screen and press the �Start� button. Minimze your Qemu screen (don�t close it). Press the �Console� button. After it�s done booting wait about 1 minute then type in the following: /mnt/disk0/lina_monitor Voila! you have a running ASA 8 Firewall in GNS3.
kernel options
console=ttyS0,9600n8 bigphysarea=16384 auto nousb ide1=noprobe hda=980,16,32