Professional Documents
Culture Documents
Examples
Examples
BOX PROJECTS
* Bassreflex box
An example of a simple bassreflex box using the
Peerless 832732 loudspeaker unit. Measured data
is imported.
FILTER PROJECTS
* simple3way
A simulation of a three way filter, the optimization work
took about 12 minutes, although no optimization function exist
one wery quickly reach good results.
+ Open the bass network dialog and modifuy e.g C11, look at the
"summed frequency response diagram" and see how the frequency
response changes, note that you can used the arrow-up/down keys
to increase/decrease the component values.
* advanced3way
A three way filter with 4th order slopes, the total time to
acieve this was about 60 minutes starting from scratch. Note the
implemententation of the notch filter in network 3 to cope with the
3dB peak at 11kHz. Click on the R1--R4 buttons to get a view of
the capabilities of the system optimizer.
* active3way
An active filter example with 4th order slopes, the total time
to achieve this was about 45 minutes staring from scratch. Note
especially the notch filter in network 3 that serves to suppress
a 3dB peak at 11kHz.
* advanced2way
A two way filter that makes full use of the Store/Recall functionality
this example is suitable for testing the emulator for the first time.
* series2way
A two way series topology filter project.
* series3way
A three way series topology filter project.
Hope the examples gives a good notion of LspCAD's abilities and
also helps you getting started.