AER
USER MANUAL
Bluetooth 4.1 Headset
Read this user manual carefully and completely before using the
product.
Important safety information
1.Do not listen at high volume levels for long periods of time to
prevent hearing damage.
2.Do not use the product if there is any potential danger.
3.Do not turn the volume too high to hear sounds around you, turn
down the volume if you feel a tinnitus or the volume is too high.
4.Do not use the product in an environment that requires your special
attention(e.g. in traffic).
5.Keep the product, accessories and packaging parts out of reach of
children, to prevent accidents and choking hazards.
6.Always keep the product dry to avoid corrosion .
7.Do not use the product if you feel obvious discomfort, irritation or
have other adverse reactions.
8.Do not expose the product to extreme temperatures below -15°C.
(5°F) or above 55°C (131°F) , to maintain the lifespan of headset or
battery.
Delivery includes
Bluetooth headset 1pc
USB charging cable 1pc
User manual 1pce
Charaingand battery scanned by GreedyKid
Only use charging cable supplied by nine SeneryeAseaAX
to the headset.
Warni
The DC voltage should be 5V and oad. Merced pgaisation to
Charging Greedy Kidz( @gmail.com
The headset built-in battery is rechargeable and non-detathable. Do
not replace the battery.
1. Switch off the headset before charging.
coe 1 eee2. Connect the smaller plug of the charging cable to the USB socket
of the headset; connect the other plug to the USB socket of your
computer or other charging device; the LED lights up red and the
headset is being charged.
3. When the headset is fully charged(about 1.5~2hrs), the LED lights
up blue or LED goes out.
Headset Overview
Scan button
Play/Pause button
Pairing mode
Keep the MF button pressed until the LED remains blue.
Reconnection mode
Keep the MF button pressed until the LED flashes blue.
Switch the headset off
Keep the MF Button pressed until the LED flashes blue then goes off.
Pair the headset with your mobile phone
1. Keep the distance between the headset and your mobile phone ( or
other Bluetooth device) within 1 meter. The closer, the better.
2. Keep the MF button pressed until the LED remains blue. the
headset is in pairing mode.
3. Switch on the Blue i f, r. ile. phone, on which
start a search for Best HRA AY Pee Re
4, From the found BI ices, io” to establish a
Bluetooth connection tees nace pear tharie thedefault
PIN cade""0000". and mone compensation to
5. Once the headset is paired with the mobile phone, the LED flashes
blue. GreedyKidz@gmail.com
eee 2D eeeAttention: If pairing is not successful within 60 seconds, the LED
goes off and the Bluetooth pairing ends. Repeat the pairing
procedure.
Disconnect the headset with your mobile phone
1. Switch the headset off.
2. Or switch off the Bluetooth function of your mobile phone,
3. Or take the headset from your mobile phone 20m (GO0ft) away or
even farther.
Reconnect the paired headset to your mobile phone
1.Keep the distance between the headset and your mobile phone( or
other Bluetooth device) within 1 meter. The closer, the better
2.Keep the MF button pressed until the LED flashes blue. The
headset is in reconnection mode.
3.Switch on the Bluetooth function of your mobile phone, The
headset will automatically reconnect to It
Answer a call
Press the MF button once, or use your mobile phone to answer It
End a call
Press the MF button once. Or use your mobile phone to end it
Reject a call
After hearing a beep, keep the MF button pressed for around 2
seconds or use your mobile phone to reject it
Call waiting (need to be supported by your mobile phone)
When you are on call 1, there comes call 2) to answer oall 2 and
keep call 1: keep the MF button pressed for around 2 seconds
When call 2 ends, to switch back to call 1; keep the MF button
pressed for around 2 seconds
Redial the last call
Press the MF button twice
Voice dialing(need to be supported by your mobile phone)
Keep the MF button pressed for around 2 seconds
scanned by GreedyKid
please send your thanx
and money compensation to
GreedyKidz@gmail.com
eee 3 cee
|
/
RES