T6V NORD
CERTIFICATE
CONCERNING FACTORY PRODUCTION CONTROL
ACCORDING TO ANNEX ZA OF DIN EN 14399-1:2006
AND DIN EN 15048-1:2007,
“The Certification Body for Structural Metalic Products of TOV NORD Systeme GmbH & Co. KG hereby confirms in
‘accordance with the Regulation (EU) Number 306/2011 of 09 March 2011 that the company
DIV d.o.0, - Fasteners Factory
D Vv 10430 Samobor, Bobovica 10a
Republic of Croatia
has been cerlifed with their construction product
Components and assemblies from ferritic steels for high strength preloaded
and non-preloaded structural bolting assemblies M12 up to M36
according to DIN EN 14399-4, -8 and DIN EN 15048-1
= Detailed Scope see page 2 of the certificate —
‘which was subject to an initial inspection of the products by the manufacturer and that the construction product is
subjected to a continuous factory production contal
The Notified Body conducted an initial inspection ofthe plant and of the factory production control and performs
‘continuous monitoring and conformity assessment ofthe factory production control,
(Conformity Certifcation Procedure: System 2+)
Certificate No.: 0045-CPR-1736
Year of initial inspection: 2012
‘This certificate has been issued in accordance with the Construction Products Regulation and is valid provided the
provisions of the harmonised technical specification indicated are complied with and the manufacturing conditions
‘nthe plant or the factory production control are not modified to # major degree,
fous
Hamburg, 01. 12, 2013,
Validity endorsement Revieion etatus: Certification Body
Valid unt 19.12.2017 Rey.01 01.12.2013, - Structural Metallic Products -
TOVNORD Systems GmbH &.Co.KG 7 Ret t326WLe4t32 der TUV NORD Systems GmbH & Co. KG
Tol +4840) 40-8667.2703
Fax +4940) 40-8567.2710
femal Mhesse@tuev-nore de
Groae Gannstrase 29
22525 Hamburg
Germany
Noted Body), 1 number 45
Page 1 of 2TUV NORD Systems GmbH & Go. KG
Certification Body — Structural Metallic Products.
‘of TUV NORD Systems GmbH & Co. KG (Reg. No. 0045)
TUV NORD
‘Scope of the inspection of construction product manufacturers according to CPR.
Regulation (EU) No.: 305/2011 of 09 March 2011
‘Annex to Certificate
Date
Reference
Company
Place of manufacture
0045-CPR-1736
£04.12. 2013
+ 4326WL44192
: DIVd.o.0, - Fasteners Factory
£ 10430 Samobor, Bobovica 10a , Republic of Croatia
‘The following construction products are subject to factory production control and their conformity with the
‘harmonised technical specification mentioned is regularly checked and certied by the Certifcation Body for
Structural Metalic Products of TUV NORD Systems GmbH & Co. KG:
[Rem | —Nateval | — Standard —| Construction proauct Dinansions am]
ae Hexagon ead bats | Mi2=N6 7 HOG - EN'SO ‘0584
Sosa a8 DINEN 15048-1"—_| MI2—NGB / Flake Zine~ENISO 10689
1 [8858.58 | ew sso4e-,-2 | isoapr4. 1804017 | M12—MaB / electroplated EN IS0 4042
een bso winout surlace westmert
| Stud bolts ace. to
= DINEN 15048-1 win | 12-36 / HOG-EN 0 19984
sacues threaded both ends or | M12 M98 / Fiske Zine ~EN ISO 10089,
2 ese 88 EN 15048-1,-2 | as threaded rods ‘M12 ~ M36 / electroplated - EN ISO 4042
58, DINISO 1691-48 | Also Wfhoutsrtacereaiment
(ormoanes
Hexagon Nuts
= DINENSOHB-s, | W126 / HOG EN So 19884
3 EN 15048-1,-2 | iSO 4032, SO 4033 Also Without surface treatment
(or modified)
= M2 a6 / HDG - EN iSO 10664
WY too, | EN 18048-1.-2 | DINEN 1S048-1 | Alto Wthou surface treatment
ss Hexagon head bots | M12 —M96 / HOG-EN ISO 10884
ee | DINEN 4380-48 | MI2—M36 / Flake Zinc = EN ISO 10583
see £N14990-4,-8 | (modifecienain | N12 M36 / electroplated EN ISO 4042
posable) ‘Neo thou arte weamert
WW12—MG6 7 HOG-EN 180 10664
Hexagon nurs Wi2=Ma® / Hae Zine = EN SO 10583
6 |10 EN 1430048 | DINEN43064,.0 | MI2—M96 / electroplated “EN 160 4042
‘Aso thou arte teatent
Harness dane Washers Wi2=MG6 / HDG EN ISO 10884
7 | Hv300-370 | EN 14309-5,-6 | DIN EN 14399-5, -6 Also Without surface treatment
Signature editor: -
Geteston boo) ru tae Proacs
Page 20f2CERTIFICATE
CONCERNING FACTORY PRODUCTION CONTROL
ACCORDING TO ANNEX ZA OF DIN EN 14399-1:2006
AND DIN EN 15048-1:2007
‘The Certfcation Body for Structural Metalic Products of TUV NORD Systems GmbH & Co. KG hereby confirms in
‘accordance with the Regulation (EU) Number 305/2011 of 09 March 2011 that the company
Dr Vv Divd. Tvornica Vijaka
Boboviea 10 a, 10430 Samobor ;
IV gardijske brigade 44, 22300 Knin
Republic of Croatia
has been certified with their construction product
Components and assemblies from ferritic steels for high strength preloaded
and non-preloaded structural bolting assemblies M12 up to M36
according to DIN EN 14399-1 and DIN EN 15048-1
— Detailed Scope see page 2 of the certificate —
‘hich was subject to an inital inspection of the products by the manufacturer and thatthe construction product is
subjected to @ continuous factory production control
‘The Notified Body conducted an inal inspection ofthe plant and ofthe factory production control and performs
‘continuous monitoring and conformity assessment ofthe factory production control.
‘(Conformity Certification Procedure: System 2*)
Certificate No.: 0045-CPR-1736
‘Year of initial inspection: 2012
This certificate has been issued in accordance with the Construction Products Regulation and is valid provided the
provisions of the harmonised technical specification indicated are complied with and the manufacturing conditions
inthe plant or the factory production control are not modified to a major degree.
(paras
Catone”
Hamburg, 01.12.2013, i
Meshkov
Certification
- Structural Metallic Products -
75002
113119270 = Toy Nonb Sysema cr Eee
Validity endorsement:
Vali unt 19.12:
Rev. 02/ 29.02.2016
Ret.
ToyNono spionecinace ne Sp
vata Gahearase
ra igi aoe 2367
Bazi Hanbu Pox Tasco aoassrarto
many ‘email dmeshkov@tuev-nord de
Page 1 of2