You are on page 1of 15

2001 Ford Escape

r
2001 STARTING & CHARGING SYSTEMS Generators & Regulators - Escape

go to next step. If battery voltage is not present, repair Light Green/Red wire between
generator and instrument cluster. See WIRING DIAGRAMS.
4. Start engine and let idle. Measure voltage between positive battery terminal and
generator terminal B+ (Yellow/White wire). See EigJ. If voltage is less than 0.5 volt,
replace generator. If voltage is 0.5 volt or more, repair Yellow/White wire between
generator and battery.

G94H32141

Fig. 1: Identifying Generator Terminals


Courtesy of FORD MOTOR CO.

You might also like