= SHABRI ENTERPRISES
(A Complete Industrial Test House)
SHA BRI Accredited by NABL under ISO/I
ENTERPRISES —143-D Light Industrial Area Bhilai, C.
Tel. Phone No.: Office: 0788-2282628
E-Mail: bhilaitest’@gmaileom Web: www.bhilaitest.com
17025 for Chemical and Mechanical Testing
190026
| Price List w.e.f. 01/12/2018 valid till 31.03.2019
Up to Eight Element (Except Nitrogen &Boron)
Each Additional Element above 8 Elements
Sr.No. Test |_Rate per specimen(Rs.)
A |CHEMICALANALYSIS |
lon Spectro Analysis-Ferrous Base | .
a Element - _I 200 |
b. | Upto 5 Element (Except Nitrogen &Boron) (C.5,P,Si & Mn) | 400
| Nitrogen, Boron Each
| Spectro Analysis Non Ferrous Base (Cu)
(a. T Single Element : 250
ee :
|b. | Upto 8 Element (Except Nitrogen & Boron } 700
_| Each Additional Element above 8 Elements 60
|. | Nitrogen, Boron each 200
Unknown Sample to Confirm Grade 800
Mass of Zink Coating
“a Persample a our office
“b. [atclientsite 7000 (Max 50 samples )
eee ee ee - ah cla lll |
8. | MECHANICAL TESTS Rate per specimen(Rs.)
ile/ Transverse/ Compression/ Through THK _
Up to 15mm Thick/Dia 400
| 15mm to 30 mm Thick/Dia 450
Above 30mm Thick/Dia 500
ee _ fj =
rensile Test with 0.2% & 0.1% Proof Stress & Strain Diagram 100 extra on above price
using Electronic Extensometer
Proof Load Test for Bolt / Nut — ‘400
2. Bend Test — _
‘@ Upto 15mm Thick/Dia 200
35mm to 30 mm Thick/Dia 250
Above 30mm Thick/Dia i
3. Re-Bend Test on Torr Stee! Bar(After aging) _ 1
Up to 15mm Thick/Dia 300
| 35mm to 30 mm Thick/Dia 350
Above 30mm Thick/Dia = 0= SHABRI ENTERPRISES
(A Complete Industrial Test House)
SHABRI Accredited by NABL under ISO/IEC 17025 for Chemical and Mechanical Testing
ENTERPRISES —_143-D Light Industrial Area Bhil 90026
sommenccwnees ‘Tel. Phone No.: Office: 0788-2282628
E-Mail: bhilaitest@ gmail.com Web: www.bhilaitest.com
Rate per specimen (Rs.) |
‘Sr.No. | Test
a4 Impact Test —_
it room temperature (Set of three )
| Below 0 °C to -70°C (Set of three) |
| |
6 | Macro Etch Test (For Welded joints of Pipes) |
| Upto 4” NB 250
| 4"NB to 8" NB
8" NB to 12” NB
et
| Upto 4” NB
| 4"NB to 8" NB
[8"NBto12"NB
iardness test (3 readings)
| HRB/HRC
-Test with sample preparation (per sample)
[€._] SPECIMEN MACHINING CHARGE (cutting not included) | Rate per specimen (Rs.
1. | Tensile (Plates, Rounds, Structural’s, Ete.) Rounds |
[ a) | Upto 20 mm Thick/Dia. a 30 |
[b._| 20-40 mm Thick/Dia. — | 400 |
| 41-60 mm Thick/Dia. 450 :
[a _| Above 61 mm 500
2__| Impact Sample
For plate/welded sample
Upto 20 mm thick
| Cutting Charge(Coupon, Plates, Slabs, Pipes, Bars) MS{PCINon | SS/Aloy
| ferrous
| Upto 20 mm Thk
21 to 40 mm Thk
a ee
[41 to 60 mm Thk
[61 to 100 mm Thk= SHABRI ENTERPRISES
(A Complete Industrial Test House)
SHABRI Accredited by NABL under ISO/IEC 17025 for Chemical and Mechanical Testin
ENTERPRISES —_143-D Light Industrial Area Bhilai, C.G.-490026 “
Tel. Phone No.: Office: 0788-2282628
E-Mail: bhilaitest@gmail.com Web: www-bhilaitest.com
TESTING CHARGES.
| Sr.No. | Type of Testing (NDT) Rate List
T.__| PMI Testing at client site (Maximum of 50 samples per visit) Rs. 7000,
2.__| PMI Testing at our lab per sample Rs, 1000
| 3.__| PMI Testing at our lab per sample (Third party inspection) | Rs. 2000 5|
4. _ | Radiography testing upto 20 mm thick Rs. 5 per square inch
| | Radiography testing upto 40 mm thick Rs, 5.5 per square inch
| Radiography testing abvo 40 mm thick Rs. 6 per square inch
j Minimum visit charges Rs. 3000
4 Z oe Whichever is higher
Radiography of Test piece (Per Test Piece) Rs. 1000 |
6. | Ultrasonic Testing Per joint / Running Mtr. Rs.100 sl
| Minimum visit charges Rs. 2500
[Ee a - Whi igher
7, | Thickness gauging Rs.100
| | Minimum visit charges Rs. 2500
E | _ paar Whichever is higher
8. Stress relieving of weld joint ( Per joint/meter) Rs.2000 -
| Note : Glass wool should be provide by client Minimum visit charges Rs. 4000
| a - _____ Whichever is higher
9. | Magnetic particle testing (YOKE Type) Rs.150 per mtr.
| Magnetic particle testing with white contrast Rs.200 per mtr.
| Minimum visit charges Rs. 2500
L ‘Whichever is higher |