BS-EN-10029 : 1991 —_———— eee Cooperating organizations ‘The European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the national standards “organizations of the following countries, Austria Oesterreichisches Normungsinstitut Belgium Institut belge de normalisation Denmark Dansk Standardiseringsraad Finland ‘Suomen Standardisoimislito, x: France Association francaise de normalisation Germany Deutsches Institut fir Normung e.V. Greece Hellenic Organization for Standardization Ieeland ‘Technological Institute of Iceland Ireland National Standards Authority of Ireland Italy Ente Nazionale Italiano di Unificazione Luxembourg Inspection du Travail et des Mines ~ Netherlands Nederlands Normalisatie-instituut Norway Norges Standardiseringsforbund Portugal Instituto Portugués da Qualidade Spain Asociacién Espafiola de Normalizacién ¥ Certificacién Sweden Standardiseringskommissionen i Sverige Switzerland Association suisse de normalisation United Kingdom British Standards Institution “This British Standard was published under the authority of Amendments issued since publication the Standards Boar and cones Into effeet on 31 Oxtober 1001 Amd. No. | Date ‘Text affected © Bst 1991 ‘The following BSI references Felate tothe work on this ae a é standard Committe reference SM/2 Draft forcomment so/aza2 po} ISBN 0 580 201449BS EN 10029 : 1991 Contents Page ‘Cooperating organizations Inside front cover ‘National foreword i Foreword 2 ‘Text of EN 10029 3 National appendix NA (informative) Inside back cover National foreword ‘This British Standard has been prepared under the direction of the Iron and Steel Standards Policy Committee and is the English language version of EN 10029 "Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass’. It supersedes the technical content of clause 14 of BS 4360 : 1990, clause 18 of BS 1501 ; Part 1; 1980, clause 8 of BS 1501 : Part 2 : 1988 and clause 14 of BS 1601 : Part 3 : 1990. Amendments to BS 4360 : 1990, BS 1501 ; Part 1 : 1980, BS 1501 : Part 2: 1988 and BS 1501 : Part 3: 1990 will be published simultaneously with this standard. Compliance with a British Standard does not of itself confer immunity from legal obligations.