Maintenance and Service Manual
L Powershift @
7) Transmission &
Ct He HR MODEL 4 SPEED SHORT DROP Ill
See
COMPONENTS
CLARICHURTEH> ‘
‘SM HR28410 (Rev. 2-80)Service Publications
1-77 at 1-40, Rt. 18, Box 38
Statesville, NC 28677
TOWING OR PUSH STARTING
Before towing the vehicle, be sure to lift the NOTE: If the transmission has 4 wheel drive,
rear wheels off the ground or disconnect the disconnect both front and rear drivelines.
driveline to avoid damage
mission during towing.
to
the trans- Because of the design of the hydraulic
system, the engine cannot be started by
pushing or towing
‘Copyright Clark Equipment Company, 1891
npublahod mera A ight reve
mit Distibuton
No pat of this work maybe reread in any form under
fy mare wot tect wren pemision of Cla
Equpment Comesny.CLARK CLARK
MAINTENANCE & SERVICE MANUAL CORRECTIONS
FOR THE
28000 SERIES, 32000 SERIES & 34000 SERIES
Please keep this sheet with any 28000, 32000 or 34000 Mi
tenance and Service Manuals.
Use the following torque chart for the self locking elastic stop nut used on the input, output, idler
and P.T.O. shafts when repairing any of the above series transmissions.
Corrections will be made at the next individual Maintenance and Service Manual printing.
SELF LOCKING ELASTIC STOP NUT TORQUE
THREAD SIZE FT. LBS, TORQUE NEWTON METERS (N.m.)
1” - 20 150 - 200 203.4 - 271,1
| 1%" - 18 200 - 250 271,2 - 338,9 oh
1H" -18 300 - 350 406.8 - 474.5
I 1H" -12 7 400 - 450 542,4 - 610,1
9-172 3-08