The home of the turntable
THE VINYL énGiné
For more turntable manuals and setup information
please visit www.vinylengine.comORDER NO. $07905-T052
Technical Information
All Direct Drive Automatic Turntable Systems
Subject: Incomplete auto return
= SYMPTOM
When the tone arm is in auto return mode, the
tone arm may fail to stay on the arm rest during
its auto return operation.
(See Fig. 1)
® If the above-mentioned trouble occurs, take
the proper countermeasure according to the
given instruction,
Tone. acm
™ CAUSE
The return rubber may not move off the return
pin, depending on its surface condition.
Therefore, when the actuating plate moves in
the direction of the arrow (+), the return pin
also moves along with it.
This causes the tone arm to slip off the arm rest.
(See Fig. 2)
™ REMEDY Actuating plate
Sparingly apply MOLYTONE GREASE #380 « a “Tone erm
Fixing plate ass'y
to the return rubber tip. (See Fig. 2)
Return rubber
Fig. 2
@ ENFORCEMENT
Necessary counter measures have already been taken for all DD automatic turntables manufactured on
and after Feb. 9, 1979.
+ For products after serial No.C1119209C1XX, Counter measures have.already been taken.
rsosecermy, | mam
Shen of imi ie SUN
Technics grote, ttetoair
an