Professional Documents
Culture Documents
2001 Nissan Maxima PDF
2001 Nissan Maxima PDF
2001 Nissan Maxima PDF
Welcome to the growing family of new tenance requirements, assisting you in the MODIFICATION OF YOUR
NISSAN owners. This vehicle is delivered to safe operation of your vehicle. VEHICLE
you with confidence. It was produced using
the latest techniques and strict quality control. This vehicle should not be modified. Modi-
WARNING fication could affect its performance,
This manual was prepared to help you under- safety or durability, and may even violate
stand the operation and maintenance of your IMPORTANT SAFETY INFORMA- governmental regulations. In addition,
vehicle so that you may enjoy many miles of TION damage or performance problems result-
driving pleasure. Please read through this REMINDERS FOR SAFETY! ing from modification may not be covered
manual before operating your vehicle. under NISSAN warranties.
Follow these important driving rules to
A separate Warranty Information and Main- help ensure a safe and comfortable trip WHEN READING THE MANUAL
tenance Log Booklet (in U.S.), Warranty for you and your passengers!
and Roadside Assistance Information This manual includes information for all
booklet (in Canada) explains details about I Never drive under the influence of al- options available on this model. Therefore,
the warranties covering your vehicle and cohol or drugs. you may find some information that does
vehicle maintenance schedules. Addition- not apply to your vehicle.
I Always observe posted speed limits
ally, a separate Customer Care/Lemon Law and never drive too fast for condi- All information, specifications and illustrations
Booklet (U.S. only) will explain how to in this manual are those in effect at the time of
tions.
resolve any concerns you may have with printing. NISSAN reserves the right to change
your vehicle, as well as clarify your rights I Always use your seat belts and appro- specifications or design at any time without
under your state’s lemon law. priate child restraint systems. Preteen notice.
Your NISSAN dealer knows your vehicle best. children should be seated in the rear
When you require any service or have any seat.
questions, he will be glad to assist you with I Always provide information about the
the extensive resources available to him. proper use of vehicle safety features
READ FIRST — THEN DRIVE to all occupants of the vehicle.
SAFELY I Always review this Owner’s Manual
Before driving your vehicle please read for important safety information.
your Owner’s Manual carefully. This will
ensure familiarity with controls and main-
Z 00.1.17/A33-D/V5.0 X
IMPORTANT INFORMATION CALIFORNIA PROPOSITION 65
ABOUT THIS MANUAL WARNING
You will see various symbols in this manual.
They are used in the following ways: WARNING
WARNING Engine Exhaust, some of its constitu-
ents, and certain vehicle components
contain or emit chemicals known to State
This is used to indicate the presence of a of California to cause cancer and birth
hazard that could cause death or serious defects or other reproductive harm.
personal injury. To avoid or reduce the
risk, the procedures must be followed
precisely.
SIC0697
Z 00.1.17/A33-D/V5.0 X
Welcome To The World Of NISSAN
portation services to the supply of lubricants,
parts and accessories.
NISSAN pioneered the use of electronics and
computers in automobiles, and has led the indus-
try in improving both performance and fuel effi-
ciency through new engine designs and the use
of synthetic materials to reduce vehicle weight.
The company has also developed ways to build
quality into its vehicles at each stage of the
production process, both through extensive use
of automation and — most importantly —
through an awareness that people are the cen-
tral element in quality control.
From the time the parts arrived from our suppli-
ers until you took delivery of your new Nissan,
WFW0002 dozens of checks were made to ensure that only
the best job was being done in producing and
Your new NISSAN is the result of our dedication the facilities include the Nissan Manufacturing delivering your vehicle. NISSAN also takes great
to produce the finest in safe, reliable and eco- facility in Smyrna, Tennessee, vehicle styling care to ensure that when you take your NISSAN
nomical transportation. Your vehicle is the prod- design at Nissan Design International in San to your dealer for maintenance, the service tech-
uct of a successful worldwide company that Diego, California, and engineering at Nissan nician will perform his work according to the
manufactures cars and trucks in over 17 coun- Technical Center North America in Farmington quality standards that have been established by
tries and distributes them in 170 nations. Hills, Michigan. Additionally, NISSAN employs the factory.
nearly 18,000 people throughout the United
NISSAN vehicles are designed and manufac- States, Canada, and Mexico. An additional Safety has also been built into your NISSAN. As
tured by Nissan Motor Co., Ltd. which was 71,000 people work for the 1,500 NISSAN and you know, seat belts are an integral part of the
founded in Tokyo, Japan in 1933, and NISSAN INFINITI dealers across North America. safety systems that will help protect you and your
affiliates world wide, collectively growing to be- passengers in the event of a sudden stop or an
come the fifth largest automaker in the world. In NISSAN is also a substantial contributor to the accident. We urge you to use the seat belts every
addition to cars and trucks, NISSAN also makes Canadian economy. Nissan Canada Inc., its sup- time you drive the vehicle.
forklift trucks, marine engines, boats and other pliers and over 140 dealers employ approxi-
diversified products. mately 4,500 people. These include company The NISSAN story of growth and achievement
employees and the staffs of NISSAN dealers all reflects our major goal: to provide you, our
NISSAN has made a substantial and growing across Canada. In addition, many Canadians customer, with a vehicle that is built with quality
investment in North America. NISSAN’S commit- work for companies that supply NISSAN and and craftsmanship — a product that we can be
ment is nearly $4 billion dollars in capital invest- NISSAN dealers with materials and services proud to build and you can be proud to own.
ments in facilities across the continent. Some of ranging from operation of port facilities and trans-
Z 00.1.17/A33-D/V5.0 X
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES ...
Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN
dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.
However, if there is something that your The Consumer Affairs Department will ask for You can write to NISSAN with the information
NISSAN dealer cannot assist you with or you the following information: on the left at:
would like to provide NISSAN directly with — Your name, address, and telephone For U.S. mainland and Alaska customers
comments or questions, please contact our number Nissan North America, Inc.
(NISSAN’s) Consumer Affairs Department us- — Vehicle identification number (on dash- Consumer Affairs Department
ing our toll-free number: board) P.O. Box 191
For U.S. mainland customers — Date of purchase Gardena, California 90248-0191
— Current odometer reading For Hawaii customers
1-800-NISSAN-1 Nissan Motor Corporation in Hawaii
(1-800-647-7261) — Your NISSAN dealer’s name
— Your comments or questions 2880 Kilihau St.
For Hawaii customers Honolulu, Hawaii 96819
(808) 836-0888 (Oahu Number) OR
For Canada customers
For Canadian customers Nissan Canada Inc.
1-800-387-0122 5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Z 00.1.17/A33-D/V5.0 X
Table of Seats, restraints and supplemental air bag systems
Contents Instruments and controls
In case of emergency
Do-it-yourself
Maintenance
Index
Z 00.1.17/A33-D/V5.0 X
1 Seats, restraints and supplemental air bag
systems
Z 00.1.17/A33-D/V5.0 X
SEATS
WARNING
I Do not adjust the driver’s seat while
driving so full attention may be given
to vehicle operation. The seat may
move suddenly and could cause loss
of control of the vehicle.
I After adjustment, gently rock in the
seat to make sure it is securely
SSS0133 locked.
Z 00.1.17/A33-D/V5.0 X
SPA0097 SPA0099A
Z 00.1.17/A33-D/V5.0 X
FRONT POWER SEAT
ADJUSTMENT
WARNING
I Do not adjust the driver’s seat while
driving so full attention may be given
to vehicle operation.
I Do not leave children unattended in-
side the vehicle. They could unknow-
ingly activate switches or controls.
Unattended children could become
SPA0467 involved in serious accidents.
Lumbar support (Driver’s seat)
The lumbar support feature provides lower Operating tips
back support to the driver. Move the lever up I The motor has an auto-reset overload pro-
or down to adjust the seat lumbar area. tection circuit. If the motor stops during
operation, wait 30 seconds, then reactivate
the switch.
I Do not operate the power support seat
for a long period of time when the engine is
off. This will discharge the battery.
Z 00.1.17/A33-D/V5.0 X
SSS0148 SSS0147
Z 00.1.17/A33-D/V5.0 X
I Rear seats will not fold when the lock
levers are in lock position for security of
the trunk.
WARNING
I When returning the seatbacks to the
upright position, be certain that they
are completely secured in the latched
position. If they are not completely
secured in the right position, passen-
gers may be injured in an accident or
sudden stop.
SPA0467
I Never allow anyone to ride in the
Lumbar support (Driver’s seat) luggage area or on the rear seat when
The lumbar support feature provides lower it is in the fold-down position. Use of
back support to the driver. Move the lever up these areas by passengers without
or down to adjust the seat lumbar area. proper restraint can be extremely
dangerous in an accident or sudden
stop.
SSS0149
I Properly secure all cargo to help pre-
FOLDING REAR SEAT vent it from sliding or shifting. Do not
place cargo higher than the seat-
Interior trunk access backs. In a sudden stop or collision,
The trunk can be readily accessible from the unsecured cargo could cause per-
rear seat for loading and unloading, as shown. sonal injury.
Z 00.1.17/A33-D/V5.0 X
I Closely supervise children when they ment after someone else uses the seat.
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously
injured. Keep the car locked with the
rear seatback securely latched when
not in use, and prevent children’s
access to car keys.
SSS0125
WARNING
Head restraints should be adjusted
properly as they may provide significant
protection against injury in an accident.
Do not remove them. Check the adjust-
Z 00.1.17/A33-D/V5.0 X
I Active head restraints are designed
to supplement other safety systems.
Always wear seat belts. No system
can prevent all injuries in any acci-
dent.
I Do not attach anything to the head
restraint stalks. Doing so could im-
pair active head restraint function.
Z 00.1.17/A33-D/V5.0 X
SUPPLEMENTAL RESTRAINT
SYSTEM
PRECAUTIONS ON instructions and precautions on seat belt us-
SUPPLEMENTAL RESTRAINT age.)
SYSTEM After turning the ignition key to the ON
position, the supplemental air bag warning
This Supplemental Restraint System (SRS) light illuminates. The supplemental air bag
section contains important information con- warning light will turn off after about 7
cerning the driver and passenger supplemen- seconds if the system is operational.
tal air bags, supplemental side air bags and
pre-tensioner seat belts.
Supplemental front air bag system: This
system can help cushion the impact force to
the face and chest of the driver and front
passenger in certain frontal collisions.
Supplemental side air bag system (if so
equipped): This system can help cushion the
impact force to the head and the chest area of
the driver and front passenger in certain side
impact collisions. The supplemental side air
bag is designed to inflate on the side where the
vehicle is impacted.
These supplemental restraint systems are de-
SSS0150
signed to supplement the crash protection
provided by the driver and front passenger
ARMREST seat belts and are not a substitute for them.
Seat belts should always be correctly worn
Pull the armrest forward until it is horizontal. and the driver and front passenger seated a
suitable distance away from the steering
wheel, instrument panel and front door finish-
ers. (See “Seat belts” later in this section for
Z 00.1.17/A33-D/V5.0 X
wheel or instrument panel. Always
use the seat belts.
I Keep hands on the outside of the
steering wheel. Placing them inside
the steering wheel rim could increase
the risk that they are injured when the
supplemental front air bag inflates.
SSS0131
Z 00.1.17/A33-D/V5.0 X
SSS0132 SSS0006
SSS0007
Z 00.1.17/A33-D/V5.0 X
WARNING
I Never let children ride unrestrained
or extend their hands or face out of
the window. Do not attempt to hold
them in your lap or arms. Some ex-
amples of dangerous riding positions
are shown in the previous illustra-
tions.
I Children may be severely injured or
killed when the supplemental front air
SSS0008 SSS0099 bag or supplemental side air bag in-
flates if they are not properly re-
strained.
I Also never install a rear facing child
restraint in the front seat. An inflating
supplemental front air bag could se-
riously injure or kill your child. For
additional information, see “Child re-
straints” later in this section.
SSS0009 SSS0100
Z 00.1.17/A33-D/V5.0 X
SSS0101 SSS0140 SSS0159
Z 00.1.17/A33-D/V5.0 X
SSS0162 SSS0173
Supplemental front air bag system severity frontal collisions, although they may
inflate if the forces in another type of collision
The driver supplemental air bag is located in are similar to those of a higher severity frontal
the center of the steering wheel; the front impact. They may not inflate in certain frontal
passenger supplemental air bag is mounted in collisions. Vehicle damage (or lack of it) is not
the dashboard above the glove box. These always an indication of proper supplemental
systems are designed to meet optional certifi- air bag operation.
cation requirements under U.S. regulations.
They are also permitted in Canada. The op- When the supplemental front air bag inflates, a
tional certification allows front air bags to be fairly loud noise may be heard, followed by
designed to inflate somewhat less forcefully release of smoke. This smoke is not harmful
than previously. However, all of the informa- and does not indicate a fire, but care should be
tion, cautions and warnings in this manual taken not to inhale it, as it may cause irritation
still apply and must be followed. The front and choking. Those with a history of a breath-
air bags are designed to inflate in higher ing condition should get fresh air promptly.
Z 00.1.17/A33-D/V5.0 X
Supplemental front air bags along with the use
of seat belts, helps to cushion the impact force panel. Also, do not place any objects serious personal injury. Tampering
on the face and chest of the front occupants. between any occupant and the steer- includes changes to the steering
They can help save lives and reduce serious ing wheel or instrument panel. Such wheel and the instrument panel as-
injuries. However, an inflating front air bag objects may become dangerous pro- sembly by placing material over the
may cause facial abrasions or other injuries. jectiles and cause injury if the supple- steering wheel pad, above the dash-
Front air bags do not provide restraint to the mental front air bag inflates. board, or by installing additional trim
lower body. material around the air bag system.
I Right after inflation, several air bag
The seat belts should be correctly worn and system components will be hot. Do I Work around and on the supplemen-
the driver and passenger seated upright as far not touch them; you may severely tal front air bag system should be
as practical away from the steering wheel or burn yourself. done by an authorized NISSAN
dash board. Since the supplemental front air
dealer. Installation of electrical equip-
bags inflates quickly in order to help protect I No unauthorized changes should be
the front occupants, the force of the front air ment should also be done by an au-
made to any components or wiring of
bag inflating can increase the risk of injury if thorized NISSAN dealer. The SRS wir-
the supplemental front air bag sys-
the occupant is too close to or is against the air ing harnesses* should not be
tem. This is to prevent accidental
bag module during inflation. The air bag will modified or disconnected. Unautho-
inflation of the air bag or damage to
deflate quickly after the collision is over. rized electrical test equipment and
the air bag system.
After turning the ignition key to the ON probing devices should not be used
position, the supplemental air bag warning I Do not make unauthorized changes on the air bag system.
light illuminates. The supplemental air bag to your vehicle’s electrical system,
* The SRS wiring harnesses are cov-
warning light will turn off after about 7 suspension system or front end
ered with yellow insulation either just
seconds if the system is operational. structure. This could affect proper
before the harness connectors or
operation of the supplemental air bag
over the complete harness for easy
WARNING system.
identification.
I Tampering with the supplemental
I Do not place any objects on the steer- front air bag system may result in
ing wheel pad or on the instrument When selling your vehicle, we request that you
inform the buyer about the supplemental front
Z 00.1.17/A33-D/V5.0 X
air bag system and guide the buyer to the When the supplemental side air bag inflates, a
appropriate sections in this Owner’s Manual. fairly loud noise may be heard, followed by
release of smoke. This smoke is not harmful
and does not indicate a fire, but care should be
taken not to inhale it, as it may cause irritation
and choking. Those with a history of a breath-
ing condition should get fresh air promptly.
Supplemental side air bags along with the use
of seat belts, help to cushion the impact force
on the head and the chest of the front occu-
pants. They can help save lives and reduce
serious injuries. However, an inflating side air
bag may cause abrasions or other injuries.
SSS0165 Side air bags do not provide restraint to the
lower body.
Supplemental side air bag system (if
so equipped) The seat belts should be correctly worn and
the driver and passenger seated upright as far
The supplemental side air bags are located in as practical away from the supplemental side
the outside of the seatback of the front seats. air bag. Since the side air bag inflates quickly
The supplemental side air bag (on the driver or in order to help protect the front occupants, the
front passenger seat) is designed to inflate in force of the side air bag inflating can increase
higher severity side collisions, although it may the risk of injury if the occupant is too close to
inflate if the forces in another type of collision or is against the side air bag module during
are similar to those of a higher severity side inflation. The side air bag will deflate quickly
impact. It is designed to inflate on the side after the collision is over.
where the vehicle is impacted. It may not After turning the ignition key to the ON
inflate in certain side collisions. Vehicle dam- position, the supplemental air bag warning
age (or lack of it) is not always an indication of light illuminates. The supplemental air bag
proper supplemental side air bag operation. warning light will turn off after about 7
1-16 Seats, restraints and supplemental air bag systems
Z 00.1.17/A33-D/V5.0 X
seconds if the system is operational.
This could affect proper operation of before the harness connectors or
the supplemental side air bag sys- over the complete harness for easy
WARNING tem. identification.
I Do not place any objects near the I Tampering with the supplemental
seatback of the front seats. Also, do side air bag system may result in When selling your vehicle, we request that you
not place any objects (an umbrella, serious personal injury. Tampering inform the buyer about the supplemental side
bag, etc.) between the front door fin- includes changes to the front seats air bag system and guide the buyer to the
isher and the front seat. Such objects assembly by placing material near appropriate sections in this Owner’s Manual.
may become dangerous projectiles the seatback of the front seat, or by
Pre-tensioner seat belt system (For
and cause injury if the supplemental installing additional trim material,
such as seat covers, around the side front seats)
side air bag inflates.
air bag system.
I Right after inflation, several supple- WARNING
mental side air bag system compo- I Work around and on the supplemen-
nents will be hot. Do not touch them; tal side air bag system should be
done by an authorized NISSAN I The pre-tensioner seat belt cannot be
you may severely burn yourself.
dealer. Installation of electrical equip- reused after activation. It must be
I No unauthorized changes should be ment should also be done by an au- replaced together with the retractor
made to any components or wiring of thorized NISSAN dealer. The SRS wir- as a unit.
the supplemental side air bag sys- ing harnesses* should not be I If the vehicle becomes involved in a
tem. This is to prevent accidental modified or disconnected. Unautho- frontal collision but the pre-tensioner
inflation of the side air bag or damage rized electrical test equipment and is not activated, be sure to have the
to the side air bag system. probing devices should not be used pre-tensioner system checked and, if
I Do not make unauthorized changes on the side air bag system. necessary, replaced by your NISSAN
to your vehicle’s electrical system, * The SRS wiring harnesses are cov- dealer.
suspension system or side panel. ered with yellow insulation either just I No unauthorized changes should be
Z 00.1.17/A33-D/V5.0 X
The front seat pre-tensioner seat belt system
made to any components or wiring of activates in conjunction with the supplemental
the pre-tensioner seat belt system. front air bag. Working with the seat belt retrac-
This is to prevent accidental activa- tor, it helps tighten the seat belt the instant the
tion of the pre-tensioner seat belt or vehicle becomes involved in certain types of
damage to the pre-tensioner seat belt collisions, thereby restraining seat occupants.
operation. Tampering with the pre- The pre-tensioner is encased with the seat
tensioner seat belt system may result belt’s retractor. These seat belts are used the
in serious personal injury. same as conventional seat belts.
I Work around and on the pre- When the pre-tensioner seat belt activates,
tensioner system should be done by smoke is released and a loud noise may be
an authorized NISSAN dealer. Instal- heard. The smoke is not harmful, but care
should be taken not to inhale it as it may cause
lation of electrical equipment should
irritation and choking. Those with a history of a
also be done by an authorized breathing condition should get fresh air
NISSAN dealer. Unauthorized electri- promptly.
cal test equipment and probing de-
vices should not be used on the pre- If any abnormality occurs in the pre-tensioner
system, the supplemental air bag warning light
tensioner seat belt system.
will not come on, will flash intermittently
I If you need to dispose of the pre- or will turn on for 7 seconds and remain on
tensioner or scrap the vehicle, con- after the ignition key has been turned to the
tact an authorized NISSAN dealer. ON or START position. In this case, the pre-
tensioner seat belt may not function properly.
Correct pre-tensioner disposal proce-
dures are set forth in the appropriate When selling your vehicle, we request that you
NISSAN Service Manual. Incorrect inform the buyer about the pre-tensioner seat
disposal procedures could cause belt system and guide the buyer to the appro-
personal injury. priate sections in this Owner’s Manual.
Z 00.1.17/A33-D/V5.0 X
SPA0945B SPA1097
Z 00.1.17/A33-D/V5.0 X
light will turn off after about 7 seconds if the Repair and replacement procedure
system is operational. tensioner seat belt has in flated, the
If any of the following conditions occur, the The supplemental front air bags, supplemental air bag module will not function again
supplemental front air bag system, supple- side air bags and pre-tensioner seat belt are and must be replaced. The module
mental side air bag system, and pre-tensioner designed to inflate on a one-time-only basis. should be replaced by an authorized
seat belt need servicing: As a reminder, unless it is damaged, the NISSAN dealer. The supplemental
I The supplemental air bag warning light supplemental air bag warning light will remain
front air bag module or supplemental
remains on after approximately 7 seconds. illuminated after inflation has occurred. Repair
side air bag module cannot be re-
and replacement of these systems should be
I The supplemental air bag warning light paired.
done only by authorized NISSAN dealers.
flashes intermittently.
I The supplemental air bag warning light To ensure long-term functioning, these I The supplemental front air bag sys-
does not come on at all. systems must be inspected 10 years after tem, supplemental side air bag sys-
Under these conditions, the supplemental front the date of manufacture noted on the cer- tem and pre-tensioner seat belt
air bags, supplemental side air bags and/or tification label located on the driver side should be inspected by an authorized
pre-tensioner seat belt may not operate prop- center pillar. NISSAN dealer if there is any damage
erly. They must be checked and repaired. to the front end or side portion of the
Take your vehicle to the nearest authorized When maintenance work is required on the
vehicle.
NISSAN dealer. vehicle, the supplemental front air bags,
supplemental side air bags, related parts and I If you need to dispose of these
pre-tensioner seat belt should be pointed out supplemental systems or scrap the
WARNING to the person conducting the maintenance. vehicle, contact an authorized
The ignition key should always be in the LOCK NISSAN dealer.
If the supplemental air bag warning light position when working under the hood or in-
is on, it could mean that the supplemen- side the vehicle. Correct disposal procedures are set
tal front air bag system, supplemental forth in the appropriate NISSAN Ser-
side air bag system and/or pre-tensioner WARNING vice Manual. Incorrect disposal pro-
seat belt will not operate in an accident. cedures could cause personal injury.
I Once the supplemental front air bag,
supplemental side air bag and/or pre-
Z 00.1.17/A33-D/V5.0 X
SEAT BELTS
Z 00.1.17/A33-D/V5.0 X
I Position the lap belt as low and snug
as possible around the hips, not the
waist. A lap belt worn too high could
increase the risk of internal injuries in
an accident.
I Be sure the seat belt tongue is se-
curely fastened to the proper buckle.
I Do not wear the belt inside out or
twisted. Doing so may reduce its ef-
fectiveness.
I Do not allow more than one person to
SSS0136
use the same belt.
I Never carry more people in the ve- must be replaced together with the replaced unless the collision was mi-
hicle than there are seat belts. retractor. See your NISSAN dealer. nor and the belts show no damage
I If the seat belt warning light glows and continue to operate properly.
I Removal and installation of the pre-
Seat belt assemblies not in use dur-
continuously while the ignition is tensioner seat belt system compo-
ing a collision should also be in-
turned ON with all doors closed and nents should be done by an autho-
spected and replaced if either dam-
all seat belts fastened, it may indicate rized NISSAN dealer.
age or improper operation is noted.
a malfunction in the system. Have the I All seat belt assemblies including re-
system checked by your NISSAN tractors and attaching hardware
dealer. should be inspected after any colli-
sion by your NISSAN dealer. NISSAN
I Once the pre-tensioner seat belt has recommends that all seat belt assem-
activated, it cannot be reused and blies in use during a collision be
Z 00.1.17/A33-D/V5.0 X
All US states and provinces of Canada require
the use of approved child restraints for infants
and small children. (See “Child restraints” later
in this section.)
In addition, there are many types of child
restraints available for larger children which
should be used for maximum protection.
NISSAN recommends that all preteens and
children be restrained in the rear seat if
possible. According to accident statistics,
children are safer when properly restrained
in the rear seat than in the front seat.
This is especially important because your
SSS0016 SSS0014
vehicle has a supplemental restraint sys-
CHILD SAFETY tem (air bag system) for the front passen-
ger (see “Supplemental Restraint System”
Children need adults to help protect them.
WARNING earlier in this section for precautions).
They need to be properly restrained.
Infants and children need special pro- Infants and small children
The proper restraint depends on the child’s tection. The vehicle’s seat belts may not
size. Generally, infants (up to about 1 year and NISSAN recommends that infants and small
fit them properly. The shoulder belt may children be placed in child restraints that com-
less than 20 lb (9 kg) should be placed in rear
facing child restraints. Front facing child re- come too close to the face or neck. The ply with Federal Motor Vehicle Safety Stan-
straints are available for children who outgrow lap belt may not fit over their small hip dards or Canadian Motor Vehicle Safety Stan-
rear facing child restraints. bones. In an accident, an improperly dards. You should choose a child restraint that
fitting seat belt could cause serious or fits your vehicle and always follow the manu-
fatal injury. Always use appropriate child facturer’s instructions for installation and use.
restraints.
Z 00.1.17/A33-D/V5.0 X
Larger children PREGNANT WOMEN
Children who are too large for child restraint NISSAN recommends that pregnant women
systems should be seated and restrained by use seat belts. The seat belt should be worn
the seat belts which are provided. snug, and always position the lap belt as low
as possible around the hips, not the waist.
If the child’s seating position has a shoulder Place the shoulder belt over your shoulder and
belt that fits close to the face or neck, the use across your chest. Never run the lap/shoulder
of a booster seat (commercially available) may belt over your abdominal area. Contact your
help overcome this. The booster seat should doctor for specific recommendations.
raise the child so that the shoulder belt is
properly positioned across the top, middle INJURED PERSONS
portion of the shoulder and the lap belt is low NISSAN recommends that injured persons
on the hips. The booster seat should fit the use seat belts, depending on the injury. Check
vehicle seat and have a label certifying that it with your doctor for specific recommendations. SSS0018
complies with Federal Motor Vehicle Safety
Standards or Canadian Motor Vehicle Safety THREE-POINT TYPE SEAT BELT
Standards. Once the child has grown so the WITH RETRACTOR
shoulder belt is no longer on or near the face
and neck, use the shoulder belt without the
booster seat. WARNING
I Every person who drives or rides in
WARNING this vehicle should use a seat belt at
all times.
Never let a child stand or kneel on any I Do not ride in a moving vehicle when
seat and do not allow a child in the cargo the seatback is reclined. This can be
areas while the vehicle is moving. The dangerous. The shoulder belt will not
child could be seriously injured or killed be against your body. In an accident
in an accident or a sudden stop.
Z 00.1.17/A33-D/V5.0 X
SSS0020 SSS0102 SSS0061
Fastening the seat belts 3. Position the lap belt portion low and snug
you could be thrown into it and re- on the hips as shown.
ceive neck or other serious injuries. 1. Adjust the seat.
You could also slide under the lap 4. Pull the shoulder belt portion toward the
belt and receive serious internal inju- 2. Slowly pull the seat belt out of the retractor retractor to take up extra slack.
ries. and insert the tongue into the buckle until it
snaps. The front passenger and rear seat belts have a
I For most effective protection when cinching mechanism for child restraint installa-
the vehicle is in motion, the seat The retractor is designed to lock during a
sudden stop or on impact. A slow pulling tion. It is referred to as the automatic locking
should be upright. Always sit well mode.
back in the seat and adjust the seat motion will permit the belt to move, and
belt properly. allow you some freedom of movement in When the cinching mechanism is activated the
the seat. seat belt cannot be withdrawn again until the
seat belt tongue is detached from the buckle
and fully retracted. For additional information,
see “Child restraints” later in this section.
Z 00.1.17/A33-D/V5.0 X
The automatic locking mode should be forward. The retractor should lock and re-
used only for child restraint installation. strict further belt movement.
During normal seat belt use by a passen-
If the retractor does not lock during this check
ger, the locking mode should not be acti-
or if you have any questions about belt opera-
vated. If it is activated it may cause uncom-
tion, see your NISSAN dealer.
fortable seat belt tension.
WARNING
When fastening the seat belts, be certain
that seatbacks are completely secured
in the latched position. If they are not
completely secured in the right position,
passengers may be injured in an acci- SSS0021
dent or sudden stop.
Unfastening the seat belts
To unfasten the belt, press the button on the
buckle. The seat belt will automatically retract.
Checking seat belt operation
Your seat belt retractors are designed to lock
belt movement using two separate methods:
I when the belt is pulled quickly from the
retractor.
I when the vehicle slows down rapidly.
You can check their operation as follows:
I grasp the shoulder belt and pull quickly
1-26 Seats, restraints and supplemental air bag systems
Z 00.1.17/A33-D/V5.0 X
WARNING
I After adjustment, release the adjust-
ment button and try to move the
shoulder belt down to make sure it is
securely fixed in position.
I The shoulder belt anchor height
should be adjusted to the position
best for you. Failure to do so may
reduce the effectiveness of the entire
restraint system and increase the
SPA0829 SSS0152 chance or severity of injury in an
accident.
Center of rear seat (if so equipped) Shoulder belt height adjustment
Selecting correct set of seat belts: (For front seats)
SEAT BELT EXTENDERS
The center seat belt buckle is identified by the The shoulder belt anchor height should be
adjusted to the position best suited for you. If, because of body size or driving position, it is
CENTER mark. The center seat belt tongue not possible to properly fit the lap-shoulder belt
can be fastened only into the center seat belt (See “Precautions on seat belt usage” earlier
in this section.) To lower, push the release and fasten it, an extender is available which is
buckle. compatible with the installed seat belts. The
button, and then move the shoulder belt an-
chor to the desired position, so that the belt extender adds approximately 8 inches (200
passes over the shoulder. Release the adjust- mm) of length and may be used for either the
ment button to lock the shoulder belt anchor driver or front passenger seating position. See
into position. your NISSAN dealer for assistance if the ex-
tender is required.
To raise, move the adjuster up to the desired
position without pushing the button.
Z 00.1.17/A33-D/V5.0 X
CHILD RESTRAINTS
Z 00.1.17/A33-D/V5.0 X
Vehicle Safety Standard 213 or Canadian
I NISSAN recommends that the child Motor Vehicle Safety Standard 213. I Follow all of the child restraint manu-
restraint be installed in the rear seat. facturer’s instructions for installation
I check the child restraint in your vehicle to
According to accident statistics, chil- and use. When purchasing a child
be sure it is compatible with the vehicle’s
dren are safer when properly re- restraint, be sure to select one which
seat and seat belt system. Choose a child
strained in the rear seat than in the will fit your child and vehicle. It may
restraint that meets the guidelines of the
front seat. Society of Automotive Engineers recom- not be possible to properly install
some types of child restraints in your
I An improperly installed child re- mended practice J1819 for child restraint
installation. vehicle.
straint could lead to serious injury or
death in an accident. I If the child restraint is not anchored
I if the child restraint is compatible with your
properly, the risk of a child being
vehicle, place your child in the child re-
injured in a collision or a sudden stop
In general, child restraints are designed to be straint and check the various adjustments
to be sure the child restraint is compatible greatly increases.
installed with the lap portion of a three-point
with your child. Always follow all recom- I Adjustable seatbacks should be posi-
type seat belt. In addition, this vehicle is
mended procedures. tioned to fit the child restraint, but as
equipped with a universal child restraint lower
upright as possible.
anchor system, referred to as the LATCH All US states and Canadian provinces re-
(Lower Anchors and Tether for Children) sys- quire that infants and small children be I After attaching the child restraint,
tem. Some child restraints include two rigid or restrained in approved child restraints at test it before you place the child in it.
webbing-mounted attachments that can be all times while the vehicle is being oper- Tilt it from side to side. Try to tug it
connected to these lower anchors. For details, ated. forward and check to see if the belt
see “LATCH (Lower Anchors and Tether for holds the restraint in place. If the
Children) SYSTEM” later in this section. WARNING restraint is not secure, tighten the
Child restraints for infants and children of belt as necessary, or put the restraint
various sizes are offered by several manufac- I Improper use of a child restraint can in another seat and test it again.
turers. When selecting any child restraint, result in increased injuries for both I For a front facing child restraint,
keep the following points in mind: the infant or child and other occu- check to make sure the shoulder belt
I choose only a restraint with a label certify- pants in the vehicle.
ing that it complies with Federal Motor
Seats, restraints and supplemental air bag systems 1-29
Z 00.1.17/A33-D/V5.0 X
INSTALLATION ON REAR SEAT
does not go in front of the child’s face OUTBOARD OR CENTER
or neck. If it does, put the shoulder
POSITIONS
belt behind the child restraint. If you
must install a front facing child re-
straint in the front seat, see instruc- WARNING
tions later in this section.
I The three-point belt on your vehicle is
I When your child restraint is not in
equipped with a locking mode retrac-
use, store it in the trunk or keep it
tor which must be used when install-
secured with a seat belt to prevent it
ing a child restraint.
from being thrown around in case of
a sudden stop or accident. I Failure to do so will result in the child
restraint not being properly secured.
SSS0153
It could tip over or otherwise be un-
secured and cause injury to the child Front facing
CAUTION
in a sudden stop or collision.
When you install a child restraint in a rear
Remember that a child restraint left in a outboard or center seat, follow these steps:
closed vehicle can become very hot.
1. Position the child restraint on the seat. It
Check the seating surface and buckles can be placed in a front facing direction,
before placing your child in the child depending on the size of the child. Always
restraint. follow the restraint manufacturer’s instruc-
tions.
Z 00.1.17/A33-D/V5.0 X
SSS0154 SSS0043 SSS0107
2. Route the seat belt tongue through the child 3. Pull on the shoulder belt until all of the belt
restraint and insert it into the buckle until is fully extended. At this time, the belt
you hear and feel the latch engage. retractor is in the automatic locking mode
Be sure to follow the child restraint manu- (child restraint mode). It reverts back to
facturer’s instructions for belt routing. emergency locking mode when the belt is
fully retracted.
Z 00.1.17/A33-D/V5.0 X
retractor, the automatic locking mode (child
restraint mode) is canceled; the seat belt only
locks during a sudden stop or impact.
SSS0062 SSS0108
4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re-
to remove any slack in the belt. straint, use force to tilt the child restraint
from side to side, and tug it forward to make
sure that it is securely held in place.
6. Check that the retractor is in the automatic
locking mode by trying to pull more belt out
of the retractor. If you cannot pull any more
belt webbing out of the retractor, the belt is
in the automatic locking mode.
7. Check to make sure that the child restraint
is properly secured prior to each use. If the
belt is not locked, repeat steps 3 through 6.
After the child restraint is removed and the
seat belt is allowed to wind back into the
1-32 Seats, restraints and supplemental air bag systems
Z 00.1.17/A33-D/V5.0 X
SSS0155 SSS0156 SSS0046
Rear facing 2. Route the seat belt tongue through the child
restraint and insert it into the buckle until
When you install a child restraint in a rear you hear and feel the latch engage.
outboard or center seat, follow these steps: Be sure to follow the child restraint manu-
1. Position the child restraint on the seat. The facturer’s instructions for belt routing.
direction of the child restraint depends on
the type of the child restraint and the size of
the child. Always follow the restraint manu-
facturer’s instructions.
Z 00.1.17/A33-D/V5.0 X
SSS0045A SSS0109 SSS0110
3. Pull on the shoulder belt until all of the belt 4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re-
is fully extended. At this time, the belt to remove any slack in the belt. straint, use force to tilt the child restraint
retractor is in the automatic locking mode from side to side, and tug it forward to make
(child restraint mode). It reverts back to sure that it is securely held in place.
emergency locking mode when the belt is
fully retracted. 6. Check that the retractor is in the automatic
locking mode by trying to pull more belt out
of the retractor. If you cannot pull any more
belt webbing out of the retractor, the belt is
in the automatic locking mode.
7. Check to make sure that the child restraint
is properly secured prior to each use. If the
belt is not locked, repeat steps 3 through 6.
After the child restraint is removed and the
seat belt is allowed to wind back into the
1-34 Seats, restraints and supplemental air bag systems
Z 00.1.17/A33-D/V5.0 X
retractor, the automatic locking mode (child
restraint mode) is canceled; the seat belt only I Do not secure a child restraint in the
locks during a sudden stop or impact. center rear seating position using the
child restraint lower anchors. The
child restraint will not be secured
properly.
I The LATCH system anchors are de-
signed to withstand only those loads
imposed by correctly fitted child re-
straints. Under no circumstance are
they to be used for adult seat belts or
harnesses.
SSS0177A
Some child restraints include two rigid or
LATCH (LOWER ANCHORS AND webbing-mounted attachments that can be
TETHER FOR CHILDREN) connected to two anchors located at certain
SYSTEM seating positions in your vehicle. This system
is known as the LATCH (Lower Anchors and
Tether for Children) system. This system may
WARNING also be referred to as the ISOFIX or ISOFIX
compatible system. With this system, you do
I Attach LATCH system compatible not have to use a vehicle seat belt to secure
child restraints only at the locations the child restraint. Your vehicle is equipped
shown. If a child restraint is not se- with special anchor points that are used with
cured properly, your child could be LATCH system compatible child restraints.
seriously injured or killed in an Check your child restraint for a label stating
that it is compatible with the LATCH system.
accident.
This information may also be in the child
restraint owner’s manual. If you have such a
Seats, restraints and supplemental air bag systems 1-35
Z 00.1.17/A33-D/V5.0 X
child restraint, refer to the illustration for the
rear seating positions equipped with LATCH restraint will not be secured properly if
system anchors which can be used to secure the LATCH system anchors are ob-
the child restraint. structed.
The LATCH system anchors are located at the 1. To install the LATCH system compat-
rear of the seat cushion near the seatback. A ible child restraint, insert the child
label is attached to the seatback to help you restraint LATCH system anchor at-
locate the LATCH system anchors.
tachments into the anchor points on
Some child restraints may also require the use the rear seat. If the child restraint is
of a top tether strap. See “Top tether strap equipped with a top tether, see “Top
child restraint” later in this section for installa- tether strap child restraint” later in
tion instructions. this section for installation instruc-
When installing a child restraint, carefully read tions.
SSS0157
and follow the instructions in this manual and
those supplied with the child restraint. 2. After attaching the child restraint and
before placing the child in it, use TOP TETHER STRAP CHILD
When you install a LATCH system compatible force to tilt the child restraint from RESTRAINT
child restraint to the lower anchor attachments side to side and tug it forward to
in the rear seat, follow these steps. If your child restraint has a top tether strap, it
make sure that the child restraint is must be secured to the provided anchor point.
securely held in place. First, secure the child restraint with the rear
WARNING 3. Check to make sure that the child seat belt.
restraint is properly secured prior to Remove the anchor cover from the anchor
Inspect the lower anchors by inserting each use. point which is located directly behind the child
your fingers into the lower anchor area seat.
and feeling to make sure there are no
obstructions over the LATCH system Secure the top tether strap to the anchor
bracket.
anchors, such as seat belt webbing or
seat cushion material. The child Keep the removed cover in a secured place to
prevent loss or damage to the cover.
1-36 Seats, restraints and supplemental air bag systems
Z 00.1.17/A33-D/V5.0 X
WARNING
The child restraint anchor point is de-
signed to withstand only those loads
imposed by correctly fitted child re-
straints. Under no circumstance is it to
be used for adult seat belts or har-
nesses.
Z 00.1.17/A33-D/V5.0 X
ing a child restraint.
I Failure to use the retractor’s locking
mode will result in the child restraint
not being properly secured. The child
restraint could tip over or otherwise
be unsecured and cause injury to the
child in a sudden stop or collision.
SSS0135 SSS0055
Front facing 2. Route the seat belt tongue through the child
restraint and insert it into the buckle until
If you must install a child restraint in the front you hear and feel the latch engage. Be sure
seat, follow these steps: to follow the child restraint manufacturer’s
1. Position the child restraint on the front instructions for belt routing.
passenger seat. It should be placed in a
front facing direction only. Move the seat
to the rearmost position. Always follow the
child restraint manufacturer’s instructions.
Child restraints for infants must be used
in the rear facing direction and therefore
must not be used in the front seat.
Z 00.1.17/A33-D/V5.0 X
SSS0113 SSS0056 SSS0114
3. Pull on the shoulder belt until all of the belt 4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re-
is fully extended. At this time, the belt to remove any slack in the belt. straint, use force to tilt the child restraint
retractor is in the automatic locking mode from side to side, and tug it forward to make
(child restraint mode). It reverts back to sure that it is securely held in place.
emergency locking mode when the belt is
fully retracted. 6. Check that the retractor is in the automatic
locking mode by trying to pull more belt out
of the retractor. If you cannot pull any more
belt webbing out of the retractor, the belt is
in the automatic locking mode.
7. Check to make sure that the child restraint
is properly secured prior to each use. If the
lap belt is not locked, repeat steps 3
through 6.
After the child restraint is removed and the
Seats, restraints and supplemental air bag systems 1-39
Z 00.1.17/A33-D/V5.0 X
seat belt is allowed to wind back into the
retractor, the automatic locking mode (child
restraint mode) is canceled; the seat belt only
locks during a sudden stop or impact.
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
2 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
Integrated HomeLink Universal Transceiver Programming problem-Diagnosis ....................... 2-34
(if so equipped) ....................................................... 2-32 Clearing the programmed information................ 2-34
Programming HomeLink ................................... 2-33 Rolling code programming ................................. 2-34
Programming HomeLink for Canadian Reprogramming a single HomeLink button...... 2-35
customers ........................................................... 2-33 If your vehicle is stolen ...................................... 2-35
Operating the integrated HomeLink Universal
Transceiver ......................................................... 2-34
Z 00.1.17/A33-D/V5.0 X
INSTRUMENT PANEL
Z 00.1.17/A33-D/V5.0 X
METERS AND GAUGES
SIC1321
Z 00.1.17/A33-D/V5.0 X
Changing the display:
Pushing the reset knob changes the display as
follows:
TRIP A , TRIP B , TRIP A
Resetting the trip odometer:
Pushing the reset knob for more than 1 second
resets the trip odometer to zero.
SIC1227 SIC1249
Z 00.1.17/A33-D/V5.0 X
CAUTION
If the gauge indicates engine coolant
temperature over the normal range, stop
the vehicle as soon as safely possible. If
the engine is overheated, continued op-
eration of the vehicle may seriously
damage the engine. See “If your vehicle
overheats” in the “6. In case of emer-
gency” section for immediate action re-
quired.
SIC0173 SIC1565
Z 00.1.17/A33-D/V5.0 X
The low fuel warning light comes on when
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
gauge reaches E. There will be a small
reserve of fuel in the tank when the fuel
gauge needle reaches E.
The indicates that the fuel filler lid is
located on the driver’s side of the vehicle.
CAUTION
I If the vehicle runs out of fuel, the
malfunction indicator lamp
(MIL) may come on. Refuel as soon as
possible. After a few driving trips, the
lamp should turn off. If the lamp
remains on after a few driving trips,
have the vehicle inspected by an au-
thorized NISSAN dealer.
I For additional information, see the
“Malfunction indicator lamp (MIL)”
later in this section.
Z 00.1.17/A33-D/V5.0 X
WARNING/INDICATOR LIGHTS
AND AUDIBLE REMINDERS
Low washer fluid warning light (if so
Engine oil pressure warning light High beam indicator light (Blue)
equipped)
Charge warning light or Brake warning light Cruise main switch indicator light
Seat belt warning light Low fuel warning light Malfunction indicator lamp (MIL)
Trunk lid open warning light Turn signal/hazard indicator light Slip indicator light (if so equipped)
Z 00.1.17/A33-D/V5.0 X
gine off and check the alternator belt. If the belt Supplemental air bag warning
is loose, broken, missing or if the light remains light WARNING
on, see your NISSAN dealer immediately.
After turning the ignition key to the ON posi-
tion, the supplemental air bag warning light will If the supplemental air bag warning light
CAUTION illuminate. The supplemental air bag warning is on, it could mean that the supplemen-
light will turn off after about 7 seconds if the tal air bag system, supplemental side air
Do not continue driving if the belt is system is operational. bag system (if so equipped) and/or pre-
loose, broken or missing. tensioner seat belt will not operate in an
If any of the following conditions occur, the
supplemental front air bag, supplemental side accident.
air bag and pre-tensioner seat belt needs
Door open warning light servicing and your vehicle must be taken to
your nearest authorized NISSAN dealer.
Trunk lid open warning light
This light comes on when any of the doors are
not closed securely while the ignition key is I The supplemental air bag warning light This light comes on when the trunk lid is not
ON. remains on after approximately 7 seconds. closed securely while the ignition key is ON.
Seat belt warning light and I The supplemental air bag warning light Low washer fluid warning
chime flashes intermittently. light (if so equipped)
The light and chime remind you to fasten seat I The supplemental air bag warning light This light comes on when the washer tank fluid
belts. The light illuminates whenever the igni- does not come on at all. is at a low level. Add washer fluid as neces-
tion key is turned to ON, and will remain Unless checked and repaired, the Supplemen- sary. See “Window washer fluid” in the “8.
illuminated until the driver’s seat belt is fas- tal Restraint System and/or the pre-tensioner Do-it-yourself” section.
tened. At the same time, the chime will sound seat belt may not function properly. For addi-
for about 6 seconds unless the driver’s seat tional information, see “Supplemental restraint or Brake warning light
belt is securely fastened. system” in the “1. Seats, restraints and supple- This light functions for both the parking brake
mental air bag systems” section. and the foot brake systems.
See “Seat belts” in the “1. Seats, restraints and
supplemental air bag systems” section for pre- Parking brake indicator:
cautions on seat belt usage.
When the ignition key is in the ON position, the
Z 00.1.17/A33-D/V5.0 X
light comes on when the parking brake is If the light comes on while you are driving,
applied. pedal effort as well as greater pedal contact your NISSAN dealer for repair.
travel.
Low brake fluid warning light: Low fuel warning light
I If the brake fluid level is below the
The light warns of a low brake fluid level. If the This light comes on when the fuel in the tank is
MIN mark on the brake fluid reservoir,
light comes on while the engine is running with getting low. Refuel as soon as it is convenient,
do not drive until the brake system
the parking brake not applied, stop the vehicle preferably before the fuel gauge reaches E.
and perform the following: has been checked at a NISSAN
dealer. There will be a small reserve of fuel remain-
1. Check the brake fluid level. Add brake fluid ing in the tank when the fuel gauge needle
as necessary. See “Brake and clutch fluid” reaches E.
in the “Do-it-yourself” section. 2. If the brake fluid level is correct, have the
warning system checked by a NISSAN INDICATOR LIGHTS
dealer. Overdrive off indicator light
WARNING
or Anti-lock brake This light comes on during driving when the
I Your brake system may not be work- warning light (if so overdrive switch is pressed to prevent over-
ing properly if the warning light is on. drive operation.
equipped)
Driving could be dangerous. If you The O/D OFF indicator light comes on for 2
judge it to be safe, drive carefully to After turning the ignition key to the ON posi- seconds each time the ignition key is turned
the nearest service station for re- tion, the light will illuminate. The light will turn ON. This shows the light is functioning prop-
pairs. Otherwise, have your vehicle off after about 2 seconds if the system is erly.
towed because driving it could be operational.
If the O/D OFF indicator light blinks for
dangerous. If the light comes on while the engine is approximately 8 seconds after coming on for
running, it may indicate that the anti-lock brake 2 seconds, have your NISSAN dealer check
I Pressing the brake pedal with the
system is not functioning properly. Have the the transmission and repair it if necessary.
engine stopped and/or low brake fluid
system checked by your NISSAN dealer.
level may increase your stopping dis- The automatic transmission is equipped with
tance and braking will require greater If an abnormality occurs in the system, the an electronic fail-safe mode. This system al-
anti-lock function will cease but the ordinary lows the vehicle to be driven even in the event
brakes will continue to operate normally. of damage to the electrical circuits. If this
Instruments and controls 2-9
Z 00.1.17/A33-D/V5.0 X
occurs, the gears automatically engage and indicate the cruise control system is not func- vehicle. The lamp should turn off after
lock into third gear. tioning properly. Have the system checked by a few driving trips. If the lamp does
your NISSAN dealer. not turn off after a few driving trips, have the
See the “Driving the vehicle” in the “5. Starting
vehicle inspected by an authorized NISSAN
and driving” section for fail-safe before visiting Malfunction indicator lamp dealer. You do not need to have your
your NISSAN dealer. (MIL) vehicle towed to the dealer.
Turn signal/hazard indicator If the malfunction indicator lamp comes on I Malfunction indicator lamp blinking — An
lights steady or blinks while the engine is running, it engine misfire has been detected which
The light flashes when the turn signal switch may indicate a potential emission control mal- may damage the emission control system.
lever or hazard switch is turned on. function. To reduce or avoid emission control system
damage:
The malfunction indicator lamp may also come
High beam indicator light on steady if the fuel filler cap is loose or a) Do not drive at speeds above 45 MPH
(Blue) missing, or if the vehicle runs out of fuel. (72 km/h).
This light comes on when the headlight high Check to make sure the fuel filler cap is b) Avoid hard acceleration or deceleration.
beam is on and goes out when the low beam is installed and closed tightly, and that the ve- c) Avoid steep uphill grades.
selected. hicle has at least three gallons of fuel in the d) If possible, reduce the amount of cargo
fuel tank. being hauled or towed.
Cruise main switch indicator After a few driving trips, the lamp should The malfunction indicator lamp may stop
light turn off if no other potential emission control blinking and come on steady.
The light comes on when the cruise control system malfunction exists.
Have the vehicle inspected by an autho-
main switch is pushed. The light goes out Operation rized NISSAN dealer. You do not need to
when the main switch is pushed again. When have your vehicle towed to the dealer.
the cruise main switch indicator light comes The malfunction indicator lamp will come on in
on, the cruise control system is operational. one of two ways:
I Malfunction indicator lamp on steady — An
CAUTION
Cruise set indicator light
emission control system malfunction has
The light comes on while the vehicle speed is been detected. Check the fuel filler cap. If Continued vehicle operation without
controlled by the cruise control system. If the the fuel filler cap is loose or missing, tighten having the emission control system
light blinks while the engine is running, it may or install the cap and continue to drive the
2-10 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
b) If engine speed is above 4,000 rpm in a mission only as high as the indicated shift lever
checked and repaired as necessary selected gear. Use D range on low fric- position.
could lead to poor driveability, reduced tion road surfaces.
fuel economy, and possible damage to AUDIBLE REMINDERS
If the traction control system indicator light
the emission control system. Key reminder chime
comes on and stays on for an extended period
of time when the system is turned on, have The chime will sound if the driver side door is
Traction control system your vehicle checked by your NISSAN dealer. opened while the key is left in the ignition
indicator light (if so equipped) Slip indicator light (if so switch (ignition switch is turned off). Remove
the key and take it with you when leaving the
The traction control system indicator light equipped)
vehicle.
should come on when you turn the ignition key This light will blink on when your traction
to ON. The light will go off as you start the control system is limiting wheel spin. Slippery Light reminder chime
engine. If the indicator light does not come on road conditions may exist if the slip indicator The headlights will turn off when the front door
or go off, have the TCS checked by your light blinks on. If this happens, adjust your is opened with the light switch on unless the
NISSAN dealer. driving accordingly. ignition key is in the ON position.
If the light stays on or comes on when you are You may feel or hear the system working, but When you turn the headlight switch ON again
driving, there may be a problem with your this is normal. after the lights automatically turn off and when
traction control system and it may not operate
The light will blink on for a few seconds after you open the driver’s door, the lights will not
properly. Have the system checked by your
the traction control system stops limiting wheel turn off automatically and a chime will sound
NISSAN dealer.
spin. instead. See the battery saver system under
The traction control system indicator light may “Headlight switch” in this section for details.
come on for the following reasons. The slip indicator light also comes on when
you turn the ignition key to ON. The light will go Make sure to turn the light switch off when you
a) If the system is turned off by pressing leave the vehicle.
off as you start the engine. If the light does not
the button on the instrument panel, the come on or go off, have the TCS checked by Seat belt warning chime
indicator light will come on and stay on. your NISSAN dealer. The traction control sys-
To turn the system back on, press the tem operates in all transmission shift lever The chime will sound for about 6 seconds
button again. The indicator light will go positions. But the system can upshift the trans- unless the drivers seat belt is securely fas-
off. tened.
Instruments and controls 2-11
Z 00.1.17/A33-D/V5.0 X
SECURITY SYSTEMS
IC0005 SIC1228
Your vehicle has two types of security sys- How to activate the vehicle security
tems, as follows: system
I Vehicle Security System
1. Close all windows.
I Nissan Vehicle Immobilizer System
The system can be activated even if the
The security condition will be shown by the windows are open.
security indicator light.
2. Remove the key from the ignition switch.
VEHICLE SECURITY SYSTEM
3. Close and lock all doors, hood and trunk lid.
The vehicle security system provides visual
and audio alarm signals if parts of the vehicle Lock all doors by pressing the LOCK button
are disturbed. on the multi-remote controller. When using
the multi-remote controller, the hazard indi-
cators flash twice to indicate all doors are
locked.
2-12 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
4. Confirm that the SECURITY indicator light I The alarm automatically turns off after ap- the registered Nissan Vehicle Immobilizer Sys-
comes on. The SECURITY light glows for proximately 1 minute. However, the alarm tem key.
about 30 seconds and then blink. The sys- reactivates if the vehicle is tampered with
If the engine fails to start using the registered
tem is now activated. If, during this 30 again. The alarm can be shut off by unlock-
ing a door or trunk lid with the key, or by Nissan Vehicle Immobilizer System key, it may
second time period, the door is unlocked by
pressing the UNLOCK button on the multi- be due to interference caused by another
the key or the multi-remote controller, or the
remote controller. Nissan Vehicle Immobilizer System key, an
ignition key is turned to ACC or ON, the
automated toll road device or automated pay-
system will not activate. The alarm is activated by: ment device on the key ring. Restart the en-
I If the key is turned slowly toward the I Opening the door without using the key or gine using the following procedures:
front of the vehicle when locking the multi-remote controller. 1. Leave the ignition switch in the ON position
door, the system may not activate. If the
key is returned beyond the vertical po- I Opening the trunk lid without using the key for approximately 5 seconds.
or multi-remote controller.
sition toward the rear of the vehicle to 2. Turn the ignition switch to the OFF or LOCK
remove the key, the system may be I Opening the hood. position and wait approximately 10 sec-
deactivated. If the indicator light fails to onds.
glow for 30 seconds, unlock the door How to stop alarm
once and lock it again. 3. Repeat step 1 and 2 again.
The alarm will stop only by unlocking a door or
I Even when the driver and/or passengers trunk lid with the key, or by pressing the 4. Restart the engine while holding the device
are in the vehicle, the system will acti- UNLOCK button on multi-remote controller. (which may have caused the interference)
vate with all doors, hood and trunk lid The alarm will not stop if the ignition switch is separate from the registered Nissan Ve-
locked and ignition key off. Turn the turned to ACC or ON. hicle Immobilizer System key.
ignition key to ACC to turn the system If the system does not operate as de- If this procedure allows the engine to start,
off. scribed above, have it checked by your NISSAN recommends placing the regis-
Vehicle security system operation NISSAN dealer. tered Nissan Vehicle Immobilizer System
key on a separate key ring to avoid inter-
The security system will give the following NISSAN VEHICLE IMMOBILIZER ference from other devices.
alarm: SYSTEM
Statement related to section 15 of FCC
I The headlights blink and the horn sounds The Nissan Vehicle Immobilizer System will rules for Nissan Vehicle Immobilizer Sys-
intermittently. not allow the engine to start without the use of tem (CONT ASSY-IMMOBILIZER)
Instruments and controls 2-13
Z 00.1.17/A33-D/V5.0 X
WINDSHIELD WIPER AND
WASHER SWITCH
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions;
(1) This device may not cause harmful
interference, and (2) this device must ac-
cept any interference received, including
interference that may cause undesired op-
eration.
SIC1228 SIC1322A
Z 00.1.17/A33-D/V5.0 X
REAR WINDOW AND OUTSIDE
MIRROR (if so equipped)
DEFOGGER SWITCH
WARNING CAUTION
In freezing temperatures the washer so- When cleaning the inner side of the rear
lution may freeze on the windshield and window, be careful not to scratch or
obscure your vision which may lead to damage the rear window defogger.
an accident. Warm the windshield with
the defroster before you wash the wind-
shield.
CAUTION
SIC1502
The following could damage the washer
system: To defog/defrost the rear window glass and
outside mirrors, start the engine and push the
I Do not operate the washer continu- switch on. The indicator light will come on.
ously for more than 30 seconds. Push the switch again to turn the defogger off.
I Do not operate the washer if the res- It will automatically turn off in approximately 15
ervoir tank is empty. minutes.
Z 00.1.17/A33-D/V5.0 X
HEADLIGHT AND TURN SIGNAL
SWITCH
position, the headlight low or high beam
will turn off.
Turn the switch to the position:
The front clearance, side marker, tail, license
plate and instrument lights will come on.
Turn the switch to the position:
Headlights will come on and all the other lights
remain on.
SIC1229
Z 00.1.17/A33-D/V5.0 X
passenger’s door is opened.
I When the headlight switch remains in the
or position after the lights auto-
matically turn off, the lights will turn on
when the ignition switch is turned to the ON
or ACC position from the OFF position.
CAUTION
I When you turn on the headlight
switch after the lights automatically
turn off, the lights will not turn off
automatically. Be sure to turn the
SIC1230 IC1284MA
light switch to the OFF position when
Be sure not to put anything on top of the you leave the vehicle for extended Instrument brightness control
photo sensor located on the top left-hand periods of time, otherwise the battery
side of the instrument panel. The photo The instrument brightness control operates
will go dead.
sensor controls the autolamp; if it is cov- when the light switch is in the or
ered, the photo sensor reacts as if it is dark I Never leave the light switch on when position.
and the headlights will illuminate. the engine is not running for ex- Turn the control to adjust the brightness of
tended periods of time even if the instrument panel lights (except clock) and
Battery saver system headlights turn off automatically. power window switch lights.
I When the headlight switch is in the or When the control is turned to the right until a
position while the ignition switch is in click sound is heard, the light intensity will be
the ON position, the lights (including the at maximum. When the control is turned to the
front fog light) will automatically turn off 45 left until a click sound is heard, the light will be
seconds after the ignition switch has been turned off.
turned to the OFF position. However, the
lights will turn off if the driver’s or front
Instruments and controls 2-17
Z 00.1.17/A33-D/V5.0 X
FOG LIGHT SWITCH (if so
equipped)
Headlight beam select
To select the high beam, push the lever for-
WARNING
ward. Pull it back to select the low beam.
When the daytime running light system
Passing signal is active, tail lights on your vehicle are
Pulling the lever toward you will flash the not on. It is necessary at dusk to turn on
headlight high beam. your headlights. Failure to do so could
cause an accident injuring yourself and
Daytime running light system others.
(Canada only)
The headlights automatically illuminate at a TURN SIGNAL SWITCH
reduced intensity when the engine is started
with the parking brake released. The daytime Turn signal
running lights operate with the headlight switch SIC0880
in the OFF position or in the position. Move the lever up or down to signal the turning
direction. When the turn is completed, the turn To turn the fog lights on, turn the headlight
Turn the headlight switch to the position switch to the position, then turn the
for full illumination when driving at night. signals cancel automatically.
switch to the position. To turn them off,
If the parking brake is applied before the Lane change signal turn the switch to the OFF position.
engine is started, the daytime running lights do The headlights must be on for the fog lights to
To indicate a lane change, move the lever up
not illuminate. The daytime running lights illu- operate.
or down to the point where lights begin flash-
minate once the parking brake is released.
ing.
The daytime running lights will remain on until
the ignition switch is turned off.
Z 00.1.17/A33-D/V5.0 X
HAZARD WARNING FLASHER HORN
SWITCH
I Do not use the hazard warning flash-
ers while moving on the highway un-
less unusual circumstances force
you to drive so slowly that your ve-
hicle might become a hazard to other
traffic.
I Turn signals do not work when the
hazard warning flasher lights are on.
Push the switch on to warn other drivers when To sound the horn, push the center pad area of
you must stop or park under emergency con- the steering wheel.
ditions. All turn signal lights will flash.
Some state laws may prohibit the use of the
hazard warning flasher switch while driv-
ing.
WARNING
I If stopping for an emergency, be sure
to move the vehicle well off the road.
Z 00.1.17/A33-D/V5.0 X
HEATED SEATS (if so equipped)
The front seats are warmed by built-in heaters. I Do not use the seat heater for ex-
The switches located on the center console tended periods or when no one is
can be operated independently of each other. using the seat.
1. Start the engine. I Do not put anything on the seat which
insulates heat, such as a blanket,
2. Select heat range.
cushion, seat cover, etc. Otherwise,
I For low heat, press the top of the switch. the seat may become overheated.
I For high heat, press the bottom of the I Do not place anything hard or heavy
switch. on the seat or pierce it with a pin or
I For no heat, the switch has a center OFF similar object. This may result in
position between low and high. damage to the heater.
The indicator light in the switch will illumi-
nate when low or high is selected.
2-20 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
TRACTION CONTROL SYSTEM
(TCS) CANCEL SWITCH (if so POWER OUTLET
equipped)
draw. Do not use double adapters or
more than one electrical accessory.
I Use this power outlet with the engine
running. (If the engine is stopped,
this could result in a discharged bat-
tery.)
I Avoid using when the air conditioner,
headlights or rear window defogger
is on.
I Before inserting or disconnecting a
plug, be sure to turn off the power
SIC1065 SIC1533
switch of electrical accessory being
To cancel the Traction Control System (TCS), The power outlet is for powering electrical used or the ACC power of the vehicle.
push the TCS cancel switch. The indicator accessories such as cellular telephones.
I Push the plug in as far as it will go. If
will come on. Push it again to turn the
system back on. good contact is not made, the plug
CAUTION may overheat or the internal tempera-
See “Traction control system” in the “5. Start- ture fuse may blow.
ing and driving” section. I Use caution as the socket and plug
I When not in use, be sure to close the
may be hot during or immediately
cap. Do not allow water to contact the
after use.
socket.
I This power outlet is not designed for
use with a cigarette lighter unit.
I Do not use with accessories that ex-
ceed a 12 volt, 120W (10A) power
Z 00.1.17/A33-D/V5.0 X
CIGARETTE LIGHTER AND STORAGE
ASHTRAY (accessory)
WARNING
The cigarette lighter should not be used
while driving so full attention may be
given to vehicle operation.
CAUTION
The cigarette lighter socket is a power
source for the cigarette lighter element
SIC1233 only. The use of the cigarette lighter SIC1243
socket as a power source for any other
The cigarette lighter element is an accessory. accessory is not recommended. TRAYS
A genuine NISSAN cigarette lighter unit can be
purchased from your local NISSAN dealer.
WARNING
The cigarette lighter operates when the igni-
tion switch is in the ACC or ON position.
The storage tray should not be used
Push the lighter in all the way. When the lighter while driving so full attention may be
is heated, it will spring out. given to vehicle operation.
Return the lighter to its original position after
use.
Z 00.1.17/A33-D/V5.0 X
CAUTION
I Do not use for anything other than
glasses.
I Do not leave glasses in the glasses
case while parking in direct sunlight.
The heat may damage the glasses.
SIC1238 SIC1279A
Z 00.1.17/A33-D/V5.0 X
SIC1235 SPA0388
GLOVE BOX
CAUTION When locking or unlocking the glove box, use
the master key.
I Avoid abrupt starting and braking
when the cup holder is being used to The glove box may be opened by pulling the
handle.
prevent spilling the drink. If the liquid
is hot, it can scald you or your pas-
senger. WARNING
I Use only soft cups in the cup holder.
Keep glove box lid closed while driving
Hard objects can injure you in an
to help prevent injury in an accident or a
accident.
sudden stop.
Z 00.1.17/A33-D/V5.0 X
SIC1242A
Z 00.1.17/A33-D/V5.0 X
WINDOWS
WARNING
I Make sure that all passengers have
their hands, etc. inside the vehicle
before closing the windows. Use the
window lock switch to prevent unex-
pected use of the power windows.
I Do not leave children unattended in-
side the vehicle. They could unknow-
ingly activate switches or controls
Z 00.1.17/A33-D/V5.0 X
The auto reverse function can be activated
when the driver’s window is closed by auto-
matic operation when the ignition key is in the
ON position or for about 45 seconds after the
ignition key is turned to the OFF position.
I Depending on the environment or driv-
ing conditions, the auto reverse function
may be activated if an impact or load
similar to something being caught in the
window occurs.
WARNING
SIC0627B SPA0980 There are some small distances imme-
diately before the closed position which
The passenger side switch will open or close Automatic operation
only the corresponding window. To open or cannot be detected. Make sure that all
close the window, hold the switch down or up. To fully open or close the driver’s side window, passengers have their hands, etc., in-
completely press or lift the switch and release side the vehicle before closing the win-
Locking passenger’s windows it; it need not be held. The window will auto- dow.
When the lock button is pushed in, only the matically open or close all the way. To stop the
driver side window can be opened or closed. window, just press the switch on the opposite
Push it in again to cancel. side.
Auto reverse function (For driver’s
window)
If the control unit detects something caught in
the driver’s window as it moves up, the window
will be immediately lowered.
Z 00.1.17/A33-D/V5.0 X
SUNROOF (if so equipped)
Z 00.1.17/A33-D/V5.0 X
CLOCK INTERIOR LIGHT
WARNING
I In an accident you could be thrown
from the vehicle through an open
sunroof. Always use seat belts and
child restraints.
I Do not allow anyone to stand up or
extend any portion of their body out
of the opening while the vehicle is in
motion or while the sunroof is clos-
ing.
SIC0910 IC1226
Z 00.1.17/A33-D/V5.0 X
PERSONAL LIGHT
I The key is removed from the ignition switch These lights will turn on again when any of the
while all doors are closed. above operations is performed after the lights
have turned off automatically. (The lights will
The ceiling light will turn off while the 30 turn off 30 minutes after the latest operation of
second timer is activated, when: the above as well.)
I The driver’s door is locked either with the
multi-remote controller, a key, or the lock- CAUTION
unlock switch.
I The ignition switch is turned ON. I Turn off the interior, personal and
vanity mirror lights when you leave
When the interior light switch or personal
the vehicle.
light switch is in the ON position, the inte-
rior, personal, and vanity mirror lights will I Do not use for extended periods of
automatically turn off 30 minutes after the time with the engine stopped. This IC1019-B
ignition switch has been turned to the OFF could result in a discharged battery.
position. To turn on the light again, insert When the interior light or the personal light
the key into the ignition switch and move it switch is in the ON position, the interior,
to the ON position. personal, and vanity mirror lights will auto-
matically turn off 30 minutes after the igni-
After the above procedure, the interior, per-
tion switch has been turned to the OFF
sonal, and vanity mirror lights will automati-
position. To turn on the light again, insert
cally turn off 30 minutes after the latest opera-
the key into the ignition switch and move it
tion of the following with the ignition switch in
to the ON position.
the ACC or OFF position:
After the above procedure, the interior, per-
I Opening or closing any door
sonal, or vanity mirror lights will automatically
I Locking or unlocking with the multi-remote turn off 30 minutes after the latest operation of
controller, a key or the lock-unlock switch. the following with the ignition switch in the
ACC or OFF position:
I Inserting or removing a key from the ignition
switch I Opening or closing any door
2-30 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
VANITY MIRROR LIGHT (if so
equipped)
CAUTION
I Turn off the interior, personal and
vanity mirror lights when you leave
the vehicle.
I Do not use for extended periods of
time with the engine stopped. This
could result in a discharged battery.
IC1163-B SIC0186
I Locking or unlocking with the multi-remote The light on the vanity mirror will turn on when
controller, a key or the lock-unlock switch. the cover on the vanity mirror is opened.
I Inserting or removing a key from the ignition When the interior light or the personal light
switch switch is in the ON position, the interior,
personal, and vanity mirror lights will auto-
These lights will turn on again when any of the
matically turn off 30 minutes after the igni-
above operations is performed after the lights
tion switch has been turned to the OFF
have turned off automatically. (The lights will
position. To turn on the light again, insert
turn off 30 minutes after the latest operation of
the key into the ignition switch and move it
the above as well.)
to the ON position.
Z 00.1.17/A33-D/V5.0 X
INTEGRATED HomeLink
TRUNK LIGHT UNIVERSAL TRANSCEIVER (if so
equipped)
The light illuminates when the trunk lid is The Integrated HomeLink Universal Trans-
opened. When the trunk lid is closed, the light ceiver provides a convenient way to consoli- WARNING
will go off. date the functions of up to three individual
hand-held transmitters into one built-in device.
I Do not use the Integrated HomeLink
The Integrated HomeLink Universal Trans- Universal Transceiver with any ga-
ceiver power will automatically turn off 30 rage door opener that lacks safety
minutes after the ignition switch has been stop and reverse features as required
turned to the off position.
by federal safety standards. (These
Integrated HomeLink Universal Transceiver: standards became effective for
I Will operate most Radio Frequency (RF) opener models manufactured after
devices such as garage doors, gates, home April 1, 1982). A garage door opener
and office lighting, entry door locks and which cannot detect an object in the
security systems. path of a closing garage door and
then automatically stop and reverse,
I Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi- does not meet current federal safety
cle’s battery is discharged or is discon- standards. Using a garage door
nected, HomeLink will retain all program- opener without these features in-
ming. creases the risk of serious injury or
death.
Once the Integrated HomeLink Universal
Transceiver is programmed, retain the I During programming, your garage
original transmitter for future programming door or gate may open or close. Make
procedures (i.e., new vehicle purchases). sure that people and objects are clear
Upon sale of the vehicle, the programmed of the garage door or gate that you
Integrated HomeLink Universal Trans-
are programming.
ceiver buttons should be erased for secu-
rity purposes. For additional information, I Your vehicle’s engine should be
refer to “Programming HomeLink ” later in turned off while programming the In-
this section.
Z 00.1.17/A33-D/V5.0 X
3. Using both hands, simultaneously push the
tegrated HomeLink Universal Trans- hand-held transmitter button and the de-
ceiver. sired HomeLink button. Do not release the
buttons until step 4 has been completed.
NOTE:
Some garage door openers may require
the procedures noted under “Canadian
Programming”.
4. The HomeLink indicator light will flash,
first slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. The rapid flashing light
SPA0609A indicates the Integrated HomeLink Univer-
sal Transceiver has been successfully pro-
PROGRAMMING HomeLink grammed.
1. With the ignition key in the OFF position, To program the remaining two buttons, follow
press and hold the two outside buttons, and steps 2 through 4.
release when the indicator light begins to If, after repeated attempts, you do not suc-
flash (approximately 20 seconds). This pro- cessfully program the Integrated HomeLink
cedure erases the factory set default codes Universal Transceiver to learn the signal of the
and does not have to be followed when hand-held transmitter, refer to “Rolling Code
programming additional hand-held trans- Programming” later in this section.
mitters.
PROGRAMMING HomeLink FOR
2. Hold the end of the hand-held transmitter CANADIAN CUSTOMERS
(from the device you wish to train) approxi-
mately 2 to 5 inches (50 to 127 mm) away Prior to 1992, D.O.C. regulations required
from the surface of HomeLink keeping the hand-held transmitters to stop transmitting af-
indicator light in view. ter 2 seconds. To program your hand-held
Instruments and controls 2-33
Z 00.1.17/A33-D/V5.0 X
transmitter to HomeLink , continue to press I replace the hand-held transmitter batteries indicator light begins to flash (approximately
and hold the HomeLink button (note steps 2 with new batteries. 20 seconds).
through 4 under “Programming HomeLink ”)
I position the hand-held transmitter with its ROLLING CODE PROGRAMMING
while you press and re-press (“cycle”) your
battery area facing away from the
hand-held transmitter every 2 seconds until Rolling code garage door openers (or other
HomeLink surface.
the indicator light flashes rapidly (indicating rolling code devices) which are “code pro-
successful programming). I press and hold both the HomeLink and tected” and manufactured after 1996, may be
NOTE: hand-held transmitter buttons without inter- determined by the following.
ruption.
If programming a garage door opener, etc., A. Reference the garage door opener Owner’s
it is advised to unplug the device during I position the hand-held transmitter 2 to 5 Manual for verification.
the “cycling” process to prevent possible inches (50 to 127 mm) away from the
HomeLink surface. Hold the transmitter in B. The hand-held transmitter appears to pro-
damage to the garage door opener compo-
that position for up to 15 seconds. If gram the Integrated HomeLink Universal
nents.
HomeLink is not programmed within that Transceiver but does not activate the ga-
OPERATING THE INTEGRATED time, try holding the transmitter in another rage door.
HomeLink UNIVERSAL position - keeping the indicator light in view C. Press and hold the trained HomeLink but-
TRANSCEIVER at all times. ton. If the garage door opener has the
rolling code feature, the HomeLink indica-
The Integrated HomeLink Universal Trans- If you continue to have programming difficul-
tor light will flash rapidly, then remains on
ceiver (once programmed) may now be used ties, please contact the NISSAN Consumer after 2 seconds.
to activate the garage door, etc. To operate, Affairs Department. The phone numbers are
simply press the appropriate programmed In- located in the Foreword of this Owner’s To program the Integrated HomeLink Univer-
tegrated HomeLink Universal Transceiver Manual. sal Transceiver to a garage door opener with
button. The red indicator light will illuminate the rolling code feature, follow these instruc-
while the signal is being transmitted. CLEARING THE PROGRAMMED tions after completing the “Programming
INFORMATION HomeLink ” (the aid of a second person may
PROGRAMMING make the following procedures quicker and
PROBLEM-DIAGNOSIS Individual buttons cannot be cleared, however easier).
to clear all programming, press and hold the
If the HomeLink does not quickly learn the two outside buttons and release when the 1. Locate the training button on the garage
hand-held transmitter information: door opener motor unit. Exact location and
2-34 Instruments and controls
Z 00.1.17/A33-D/V5.0 X
color of the button may vary by garage door versal Transceiver button, complete the follow- manufacturer or dealer of those devices for
opener brand. If there is difficulty locating ing. additional information.
the training button, reference the garage When your vehicle is recovered, you will
1. Press and hold the desired HomeLink
door opener Owner’s Manual. need to reprogram the Integrated
button. Do not release the button until step
2. Press the training button on the garage 4 has been completed. HomeLink Universal Transceiver with
door opener motor unit (which may activate your new transmitter information.
2. When the indicator light begins to flash
a training light). FCC Notice:
slowly (after 20 seconds), position the
NOTE: hand-held transmitter 2 to 5 inches (50 to This device complies with FCC rules part
127 mm) away from the HomeLink sur- 15. Operation is subject to the following
Following step 2, there are 30 seconds
in which to initiate step 3. face. two conditions: (1) This device may not
cause harmful interference and (2) This
3. Firmly press and release the programmed 3. Press and hold the hand-held transmitter
device must accept any interference that
HomeLink button. Press and release the button. may be received, including interference
HomeLink button a second time to com- 4. The HomeLink indicator light will flash, that may cause undesired operation.
plete the training process. (Some garage first slowly and then rapidly. When the
door openers may require you to do this The transmitter has been tested and com-
indicator light begins to flash rapidly, re- plies with FCC and DOC/MDC rules.
procedure a third time to complete the lease both buttons.
training.) Changes or modifications not expressly
The Integrated HomeLink Universal Trans- approved by the party responsible for com-
The garage door opener should now recognize ceiver button has now been reprogrammed. pliance could void the user’s authority to
the Integrated HomeLink Universal Trans- The new device can be activated by pushing operate the device.
ceiver and activate when the HomeLink but- the HomeLink button that was just pro-
ton is pressed. The remaining two buttons may DOC: ISTC 1763K1313
grammed. This procedure will not affect any
now be programmed (if not yet programmed, other programmed HomeLink buttons. FCC I.D.: CB2V67690
follow steps 2 through 4 in the “Programming
HomeLink ” procedures earlier in this section). IF YOUR VEHICLE IS STOLEN
REPROGRAMMING A SINGLE If your vehicle is stolen, you should change the
HomeLink BUTTON codes of any non-rolling code device that has
been programmed into HomeLink . Consult
To reprogram an Integrated HomeLink Uni- the Owner’s Manual of each device or call the
Instruments and controls 2-35
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
3 Pre-driving checks and adjustments
Z 00.1.17/A33-D/V5.0 X
KEYS
SIC1239B SPA1207B
You can only drive your vehicle using the safe place (such as your wallet), not in the
master or valet keys which are registered to vehicle. NISSAN does not record any key
the Nissan Vehicle Immobilizer System com- numbers so it is very important to keep track of
ponents in your vehicle. These keys have a your key number plate.
transponder chip in the key head. A key number is only necessary when you
The master key can be used for all the locks. have lost all keys and do not have one to
duplicate from. If you still have a key, this key
The valet key cannot be used for the trunk lid can be duplicated by your NISSAN dealer.
or glove box locks.
Nissan Vehicle Immobilizer System KEY -
To protect belongings when you leave a key Master and Valet keys:
with someone, give them the valet key only.
The key number is necessary when you need
Never leave these keys in the vehicle. extra Nissan Vehicle Immobilizer System
Record the key number on the key number keys. As many as 5 Nissan Vehicle Immobi-
plate supplied with your keys and keep it in a lizer System keys can be used with one ve-
3-2 Pre-driving checks and adjustments
Z 00.1.17/A33-D/V5.0 X
DOORS
WARNING
I Always have the doors locked while
driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping to
prevent persons from being thrown
from the vehicle. This also helps keep
children and others from unintention-
ally opening the doors, and will help
keep out intruders.
I Before opening any door, always look SPA0084 SPA0085
for and avoid oncoming traffic.
LOCKING WITH KEY LOCKING WITH INSIDE LOCK
I Do not leave children unattended in-
KNOB
side the vehicle. They could unknow- Power
ingly activate switches or controls. To individually lock the doors from the outside
The power door lock system allows you to lock move the inside lock knob to the LOCK posi-
Unattended children could become or unlock all doors simultaneously.
involved in serious accidents. tion, then close the door. To unlock, pull up the
I Turning the driver’s door key to the front of inside lock knob to the unlock position.
the vehicle will lock all doors. When locking the door without a key, be
I Turning the driver’s door key one time to sure not to leave the key inside the vehicle.
the rear of the vehicle will unlock the corre-
sponding door. From that position, return-
ing the key to neutral (where the key can
only be removed and inserted) and turning
it to the rear again within 5 seconds will
unlock all doors.
Pre-driving checks and adjustments 3-3
Z 00.1.17/A33-D/V5.0 X
MULTI-REMOTE CONTROL
SYSTEM
It is possible to lock/unlock all doors to release
the trunk lid and activate the panic alarm by
using the remote controller from outside the
vehicle.
Before locking the doors, make sure the
key is not left in the vehicle.
The remote controller can operate at a dis-
tance of approximately 33 ft (10 m) from the
vehicle. (The effective distance depends upon
the conditions around the vehicle.)
As many as four remote controllers can be
used with one vehicle. For information con-
cerning the purchase and use of additional
remote controllers, contact your NISSAN
SPA0944 SPA0086 dealer.
LOCKING WITH POWER DOOR CHILD SAFETY REAR DOOR The multi-remote controller will not function
LOCK SWITCH LOCK when:
All door locks will be engaged when the power Child safety locking helps prevent doors from I the battery is dead,
door lock switch is moved to the LOCK posi- being opened accidentally, especially when I the distance between the vehicle and the
tion with the driver’s or front passenger’s door small children are in the vehicle. remote controller is over 33 ft (10 m).
open. Then close the door and all doors will be
When the lever is in the lock position, the The panic alarm will not activate when the
locked.
rear door can be opened only from the key is in the ignition switch.
When the power door lock switch is moved to outside.
the LOCK position with front doors open while
a key is in the ignition switch, all doors will lock CAUTION
once and then unlock automatically.
The following conditions or occurrences
will damage the remote controller.
Z 00.1.17/A33-D/V5.0 X
In hazard indicator and horn mode, when the
I Do not allow the remote controller to LOCK button is pushed, the hazard indicator
become wet. flashes twice and the horn chirps once. When
the UNLOCK button is pushed, the hazard
I Do not drop the remote controller. indicator flashes once.
I Do not strike the remote controller If hazard indicator and horn mode is not nec-
sharply against another object. essary, you can switch to hazard indicator only
mode by following the switching procedure.
I Do not place the remote controller for
an extended period in an area where In hazard indicator only mode, when the LOCK
temperatures exceed 140°F (60°C). button is pushed, the hazard indicator flashes
twice. When the UNLOCK button is pushed,
If a multi-remote controller is lost or neither the hazard indicator nor the horn oper-
stolen, NISSAN recommends erasing ates.
the ID code of that controller. This will
(Switching procedure)
prevent the controller from unautho-
rized use to unlock the vehicle. For in- Push the LOCK and UNLOCK buttons on the
formation regarding the erasing proce- multi-remote controller simultaneously for
dure, please contact an authorized more than 2 seconds to switch from one mode
to the other.
NISSAN dealer.
When pushing the buttons to set hazard indi-
cator only mode, the hazard indicator flashes 3
HOW TO USE MULTI-REMOTE times.
CONTROL SYSTEM When pushing the buttons to set hazard indi-
Setting hazard indicator and horn cator and horn mode, the hazard indicator
flashes once and the horn chirps once.
mode
This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.
Z 00.1.17/A33-D/V5.0 X
SPA1260
Z 00.1.17/A33-D/V5.0 X
in the center q position with the ignition key
in any position except the ON position.
2. Push the UNLOCK button on the multi-
remote controller again within 5 seconds.
I All doors unlock
I The hazard indicator flashes once if all
doors are completely closed.
If the following operation is not carried out
within 5 minutes after pressing the
“UNLOCK” button, all doors will be locked
automatically.
I When any door is not opened.
I When the ignition key is not set in the
ON position.
The interior light can be turned off without
waiting for 30 seconds by turning the ignition
switch to the ON position or by locking the
doors with the multi-remote controller.
Z 00.1.17/A33-D/V5.0 X
cancel lever is in the CANCEL position. Recommended battery: Sanyo CR2025 or
It can be opened only with the key. equivalent
See “Trunk lid” later in this section for cancel Make sure that the ⊕ side faces the
lever. bottom case.
Using the panic alarm 3. Close the lid securely.
If you are near your vehicle and feel threat- 4. Push the remote controller button two or
ened, you may activate the alarm to call atten- three times to check its operation.
tion as follows:
See your NISSAN dealer if you need any
1. Push the PANIC button on the remote assistance for replacement.
controller for longer than 0.5 seconds.
If the battery is removed for any reason
2. The theft warning alarm and headlights will other than replacement, perform step 4
stay on for 30 seconds. above.
3. The panic alarm stops when: I Be careful not to touch a circuit board
I It has run for 30 seconds, or and a battery terminal.
I The LOCK or the UNLOCK button is I An improperly disposed battery can
pressed, or harm the environment. Always confirm
local regulations for battery disposal.
I The panic button or the trunk lid release
button is pushed on the multi-remote con- I The remote controller is water-resistant;
troller for longer than 0.5 seconds. SPA1046 however, if it does get wet, immediately
wipe completely dry.
BATTERY REPLACEMENT I When changing batteries, do not let dust
Replace the battery as follows: or oil get on the controller.
1. Open the lid using a suitable tool. FCC Notice:
2. Replace the battery with a new one. Changes or modifications not expressly
approved by the manufacturer compliance
3-8 Pre-driving checks and adjustments
Z 00.1.17/A33-D/V5.0 X
HOOD
SPA0984
Z 00.1.17/A33-D/V5.0 X
TRUNK LID
WARNING
I Do not drive with the trunk lid open.
This could allow dangerous exhaust
gases to be drawn into the vehicle.
See “Precautions when starting and
driving” in the “5. Starting and driv-
ing” section for exhaust gas.
I Closely supervise children when they
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously SPA0095
injured. Keep the car locked with the
trunk closed when not in use, and Cancel lever
prevent children’s access to car keys. When the lever is in the cancel position, the
trunk lid cannot be opened with the trunk lid
release button. It can be opened only with the
master key.
SPA0985
OPENER OPERATION
The trunk lid release button is located under
the driver’s arm rest.
To open the trunk lid, pull the release button.
To close, push the trunk lid down securely.
3-10 Pre-driving checks and adjustments
Z 00.1.17/A33-D/V5.0 X
vides a means of escape for children and
adults in the event they become locked inside
the trunk.
The handle is located on the back side of the
trunk lid inside the trunk compartment.
To open the trunk lid from the inside, pull
the release handle towards you until the
lock releases and push up on the trunk lid.
The release lever is made of a material that
glows in the dark after a brief exposure to
ambient light.
SPA0992 SPA1208
Z 00.1.17/A33-D/V5.0 X
FUEL FILLER LID
SPA0986 SPA0653
Z 00.1.17/A33-D/V5.0 X
STEERING WHEEL
after the fuel pump nozzle shuts off minate. If the lamp illuminates
automatically. because the fuel filler cap is loose or
Continued refueling may cause fuel missing, tighten or install the cap and
overflow, resulting in fuel spray and continue to drive the vehicle. The
possibly a fire. lamp should turn off after a few
driving trips. If the lamp does
I Use only a genuine fuel filler cap as a
not turn off after a few driving trips,
replacement. It has a built-in safety
have the vehicle inspected by an au-
valve needed for proper operation of
thorized NISSAN dealer.
the fuel system and emission control
system. An incorrect cap can result in I For additional information, see the
a serious malfunction and possible “Malfunction indicator lamp (MIL)” in
injury. the “2. Instruments and controls”
SPA0234
section.
I Never pour fuel into the throttle body
to attempt to start your vehicle. TILT OPERATION
Pull the lock lever and while holding down,
adjust the steering wheel up or down to the
CAUTION desired position.
Push the lock lever back into place to lock the
I If fuel is spilled on the car body, flush steering wheel in place.
it away with water to avoid paint dam-
age.
WARNING
I Tighten until the fuel filler cap clicks.
Failure to tighten the fuel filler cap Do not adjust the steering wheel while
properly may cause the mal- driving. You could lose control of your
function indicator lamp (MIL) to illu- vehicle and cause an accident.
Z 00.1.17/A33-D/V5.0 X
SUN VISORS MIRRORS
Z 00.1.17/A33-D/V5.0 X
ignition switch is in the ACC or ON position.
Turn the control knob to right or left to select
the right or left outside mirror, then adjust.
SPA0987 MPA0008
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
4 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
VENTILATORS
SAA0373 SAA0374
Adjust the air flow direction of ventilators. Open or close, and adjust the air flow direction
of ventilators.
: This symbol indicates that the vents
are closed when the vent switch is
moved to the left.
: This symbol indicates that the vents
are open when the vent switch is
moved to the right.
Z 00.1.17/A33-D/V5.0 X
HEATER AND AIR CONDITIONER (Manual)
CONTROLS
Fan control dial
This dial turns the fan on and off, and controls
fan speed.
Air flow control buttons
These buttons allow you to select the air flow
outlets.
— Air flows from center and side venti-
lators.
— Air flows from center and side venti-
SAA0468 lators and foot outlets.
— Air flows mainly from foot outlets.
animals.
WARNING — Air flows from defroster outlets and
I Do not use the recirculation mode for foot outlets.
I The air conditioner cooling function long periods as it may cause the
operates only when the engine is run- interior air to become stale and the — Air flows mainly from defroster out-
windows to fog up. lets.
ning.
I Do not leave children, impaired I Positioning of the heating or air con- Temperature control/MAX A/C lever
adults, or pets alone in your vehicle. ditioning controls should not be done This lever allows you to adjust the temperature
On hot, sunny days, temperatures in while driving, so full attention may be of the outlet air.
a closed vehicle could quickly be- given to vehicle operation.
MAX A/C:
come high enough to cause severe or
possibly fatal injuries to people or When the temperature control/MAX A/C lever
is moved to the left end, the air conditioner
cooling will start automatically and the A/C
Heater, air conditioner and audio systems 4-3
Z 00.1.17/A33-D/V5.0 X
indicator and air recirculation lights will turn on. HEATER OPERATION 4. Move the temperature control lever to the
desired position.
Air recirculation button Heating
Defrosting or defogging
OFF position: This mode is used to direct hot air from the
floor outlets. Some air will also come from the This mode is used to defrost/defog the win-
Outside air is drawn into the passenger com-
defrost vents. dows.
partment.
1. Push the button in.
Use the off position for normal heater, or air 1. Push the air recirculation button to the OFF
conditioner operation. position for normal heating. 2. Turn on the fan control dial.
ON position (Indicator light ON): 2. Push the button in. 3. Move the temperature control lever to the
desired position between the middle and
Interior air is recirculated inside the vehicle. 3. Turn on the fan control dial. the HOT position.
Push the air recirculation button to the ON 4. Move the temperature control lever to the I To quickly remove ice or fog from the
position when driving on a dusty road or to desired position between the middle and windows, turn on the fan control dial to 4
avoid traffic fumes and for maximum cooling the HOT position. and the temperature control lever to the full
when using the air conditioner.
For quick heating, move the air recirculation HOT position.
Air conditioning button button to the ON position. Be sure to return the I When the button is pushed, the air
Start the engine, move the fan control dial to air recirculation button to the OFF position for conditioner will automatically be turned on
the desired (1 to 4) position and push the air normal heating. to defog the windshield, and the air recircu-
conditioning button to turn on the air condi- late mode will automatically be turned off.
tioner. The indicator light will come on when
Ventilation
Outside air is drawn into the passenger
the air conditioner is on. To stop the air con- This mode directs outside air from the side and compartment to improve the defogging per-
ditioner, push the switch again to return it to center vents. formance.
the original position.
1. Push the air recirculation button to the OFF
The air conditioner cooling function oper- position.
ates only when the engine is running.
2. Push the button in.
3. Turn on the fan control dial.
Z 00.1.17/A33-D/V5.0 X
Bi-level heating recirculate mode will automatically be recirculation button to the OFF position for
turned off. normal cooling.
This mode directs outside air from the side and
center vents and hot air from the floor outlets. Outside air is drawn into the passenger Dehumidified heating
compartment to improve the defogging per-
1. Push the air recirculation button to the OFF This mode is used to heat and dehumidify.
formance.
position.
1. Push the air recirculation button to the OFF
2. Push the button in. AIR CONDITIONER OPERATION
position.
3. Turn on the fan control dial. Start the engine, move the fan control dial to
the desired (1 to 4) position and push in the air 2. Push the button in.
4. Normally move the temperature control le- conditioning button to activate the air condi- 3. Turn on the fan control dial.
ver to the midpoint between HOT and tioner. When the air conditioner is on, cooling
COLD. and dehumidifying functions will be added to 4. Push on the air conditioning button. The
the heater operation. indicator light will come on.
Heating and defogging
Cooling 5. Move the temperature control lever to the
This mode heats the interior and defogs the desired position.
windshield. This mode is used to cool and dehumidify.
1. Push the button in. Dehumidified defogging
1. Push the air recirculation button to the OFF
2. Turn on the fan control dial. position. This mode is used to defog the windows and
dehumidify.
3. Move the temperature control lever to the 2. Push the button in.
desired position between the middle and 1. Push the button in.
3. Turn on the fan control dial.
the HOT position. 2. Turn on the fan control dial.
4. Push on the air conditioning button. The
Operating tips indicator light will come on. 3. Push on the air conditioning button. The
indicator light will come on.
I Clear snow and ice from the wiper 5. Move the temperature control lever to the
blades and air inlet in front of the wind- desired position. 4. Move the temperature control lever to the
shield. This will improve heater opera- desired position.
For quick cooling when the outside tempera-
tion.
ture is high, move the air recirculation button to When the button is pushed, the air con-
I When the button is pushed, the air the ON position. Be sure to return the air ditioner will automatically be turned on to de-
Heater, air conditioner and audio systems 4-5
Z 00.1.17/A33-D/V5.0 X
fog the windshield, and the air recirculate quick heating, cooling or defrosting.
mode will automatically be turned off.
The air recirculation button should be in
Outside air is drawn into the passenger com- the OFF position for normal cooling, heat-
partment to improve the defogging perfor- ing and defrosting.
mance.
Operating tips
I Keep the windows and sun roof closed
while the air conditioner is in operation.
I After parking in the sun, drive for 2 or 3
minutes with the windows open to vent hot
air from the passenger compartment. Then,
close the windows. This will allow the air
conditioner to cool the interior more quickly.
I The air conditioning system should be
operated for about 10 minutes at least
once a month. This helps prevent dam-
age to the system due to lack of lubrica-
tion.
I If the coolant temperature gauge exceeds
the HOT position, turn the air conditioning
off. For additional information, see “If your
vehicle overheats” in the “6. In case of
emergency” section.
AIR FLOW CHARTS
The charts on the following pages show the
button and lever positions for maximum and
4-6 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
SAA0469 SAA0470
Z 00.1.17/A33-D/V5.0 X
SAA0471 SAA0472
Z 00.1.17/A33-D/V5.0 X
HEATER AND AIR CONDITIONER
(Automatic) (if so equipped)
On hot, sunny days, temperatures in
a closed vehicle could quickly be-
come high enough to cause severe or
possibly fatal injuries to people or
animals.
I Do not use the recirculation mode for
long periods as it may cause the
interior air to become stale and the
windows to fog up.
I Positioning of the heating or air con-
ditioning controls should not be done
while driving, so full attention may be
given to vehicle operation.
Z 00.1.17/A33-D/V5.0 X
1. Push the AUTO button on. (AUTO will be Dehumidified defogging Push the AUTO button to return to automatic
displayed.) control of the fan speed.
1. Push the DEF button on. (The indica-
2. Turn the temperature set dial to the left or tor light on the button will come on.) Air recirculation
right to set the desired temperature.
2. Turn the temperature set dial to the left or Push the air recirculation button to recir-
I Adjust the temperature set dial to about right to set the desired temperature. culate interior air inside the vehicle. The indi-
75°F (24°C) for normal operation.
cator light on the switch will come on.
I To quickly remove ice from the outside of
I The temperature of the passenger compart-
the windows, push the manual fan control Push it again to make the air inlet controlled
ment will be maintained automatically. Air
flow distribution and fan speed are also button and set to the maximum posi- automatically (FRESH, REC/FRE and
controlled automatically. tion . RECIRCULATION). The indicator will go out.
I As soon as possible after the windshield is The air recirculation button will not be acti-
Heating (ECON)
clean, push the AUTO button to return to vated when the air conditioner is in DEF mode.
The air conditioner does not activate. When the auto mode.
you need to heat only, use this mode. Air flow control
I When the DEF button is pushed, the
1. Push the ECON (Economy) button on. air conditioner will automatically be turned Pushing the manual air flow control button
(ECON will be displayed.) on at outside temperatures above 23°F selects the air outlet to:
2. Turn the temperature set dial to the left or (−5°C) to defog the windshield, and the air : Air flows from center and side ventila-
right to set the desired temperature. recirculate mode will automatically be tors.
turned off.
I The temperature of the passenger compart- : Air flows from center and side ventila-
ment will be maintained automatically. Air Outside air is drawn into the passenger tors and foot outlets.
flow distribution and fan speed are also compartment to improve the defogging per-
controlled automatically. formance. : Air flows mainly from foot outlets.
I Do not set the temperature lower than the MANUAL OPERATION : Air flow from defroster and foot out-
outside air temperature. Otherwise the sys- lets.
tem may not work properly. Fan speed control
To turn system off
I Not recommended if windows fog up. Push the fan control button to manually
control the fan speed. Push the OFF button.
Z 00.1.17/A33-D/V5.0 X
SERVICING AIR CONDITIONER
Z 00.1.17/A33-D/V5.0 X
AUDIO SYSTEM
Turn the ignition key to ACC or ON and press change. Buildings, terrain, signal distance and
the power on switch to turn on the radio. If you interference from other vehicles can work
listen to the radio with the engine not running, against ideal reception. Described below are
the key should be turned to the ACC position. some of the factors that can affect your radio
reception.
Radio reception is affected by station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains and other external
influences. Intermittent changes in reception
quality normally are caused by these external
influences.
Using a cellular phone in or near the ve-
hicle may influence radio reception quality.
Radio reception SAA0306
Your radio system is equipped with state-of-
the-art electronic circuits to enhance radio FM RADIO RECEPTION
reception. These circuits are designed to ex- Range: FM range is normally limited to 25 to
tend reception range, and to enhance the 30 miles (40 to 48 km), with monaural (single
quality of that reception. channel) FM having slightly more range than
However there are some general characteris- stereo FM. External influences may some-
tics of both FM and AM radio signals that can times interfere with FM station reception even
affect radio reception quality in a moving ve- if the FM station is within 25 miles (40 km). The
hicle, even when the finest equipment is used. strength of the FM signal is directly related to
These characteristics are completely normal in the distance between the transmitter and re-
a given reception area, and do not indicate any ceiver. FM signals follow a line-of-sight path,
malfunction in your radio system. exhibiting many of the same characteristics as
Remember that a moving vehicle is not the light. For example they will reflect off objects.
ideal place to listen to a radio. Because of the Fade and drift: As your vehicle moves away
movement, reception conditions will constantly
4-12 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
from a station transmitter, the signals will tend power lines, electric signs and even traffic head, capstan and pinch roller may col-
to fade and/or drift. lights. lect a tape coating residue as the tape is
played. This residue accumulation can
Static and flutter: During signal interference AUDIO OPERATION cause weak or wavering sound, and
from buildings, large hills or due to antenna PRECAUTIONS should be removed periodically with a
position, usually in conjunction with increased head cleaning tape. If the residue is not
distance from the station transmitter, static or Cassette player removed periodically, the player may
flutter can be heard. This can be reduced by need to be disassembled for cleaning.
adjusting the treble control counterclockwise I To maintain good quality sound,
to reduce treble response. NISSAN recommends using cassette
tapes of 60 minutes or shorter in length.
Multipath reception: Because of the reflective
characteristics of FM signals, direct and re- I Cassette tapes should be removed from
flected signals reach the receiver at the same the player when not in use. Store cas-
time. The signals may cancel each other, settes in their protective cases and away
resulting in momentary flutter or loss of sound. from direct sunlight, heat, dust, mois-
ture and magnetic sources.
AM RADIO RECEPTION
I Direct sunlight can cause the cassette to
AM signals, because of their low frequency,
become deformed. The use of deformed
can bend around objects and skip along the
cassettes may cause the cassette to jam
ground. In addition, the signals can be
in the player.
bounced off the ionosphere and bent back to
earth. Because of these characteristics. AM I Do not use cassettes with labels which
signals are also subject to interference as they are peeling and loose. If used, the label
travel from transmitter to receiver. could jam in the player.
Fading: Occurs while the vehicle is passing I If a cassette has loose tape, insert a
through freeway underpasses or in areas with pencil through one of the cassette hubs
many tall buildings. It can also occur for sev- and rewind the tape firmly around the
eral seconds during ionospheric turbulence hubs. Loose tape may cause tape jam-
even in areas where no obstacles exist. ming and wavering sound quality.
Static: Caused by thunderstorms, electrical I Over a period of time, the playback
Heater, air conditioner and audio systems 4-13
Z 00.1.17/A33-D/V5.0 X
disc DIGITAL AUDIO” logo on the disc I CDs that are warped, scratched, or
or packaging. have abnormal edges
I During cold weather or rainy days, the
player may malfunction due to the hu-
midity. If this occurs, remove the CD and
dehumidify or ventilate the player com-
pletely.
I The player may skip while driving on
rough roads.
I The CD player sometimes cannot func-
tion when the compartment temperature
is extremely high. Decrease the tem-
perature before use.
I Do not expose the CD to direct sunlight.
I CDs that are of poor quality, dirty,
scratched, covered with fingerprints, or
that have pin holes may not work prop-
erly.
I Do not use the following CDs as they
SAA0480 may cause the CD player to malfunction.
I 8 cm (3.1 in) discs with an adapter
I Recordable compact discs (CD-R)
Compact Disc (CD) player
I Rewritable compact discs (CD-RW)
I Only use high quality 4.7 inches (12 cm)
round discs that have the “COMPACT I CDs that are not round
I CDs with a paper label
4-14 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
FM-AM RADIO WITH CASSETTE
PLAYER
Audio main operation
Power/Volume control:
Turn the ignition key to ACC or ON, then push
the Power/Volume control knob. The mode
(radio or cassette) which was playing immedi-
ately before the system was turned off re-
sumes playing. When no cassette is loaded,
the radio comes on. Pushing the Power/
Volume control knob again turns the system
off.
Turn the Power/Volume control knob to adjust
the volume.
SAA0263
Z 00.1.17/A33-D/V5.0 X
FM-AM radio operation
FM-AM band select:
Push the FM-AM band select button to listen to
the radio and tune in the desired station.
Pushing the FM-AM band select button will
change the band FM1, FM2 or AM.
The FM stereo indicator, ST illuminates during
FM stereo reception. When the stereo broad-
cast signal is weak, the radio automatically
changes from stereo to monaural reception.
TUNE (Tuning):
SAA0235
Adjusting tone quality and speaker display reappears. Once the sound quality is
balance: set to the desired level, press the AUDIO WARNING
button repeatedly until the radio or cassette
To adjust BASS⋅TREB⋅FADER⋅BAL (Bass, tape display appears. The radio should not be tuned while
Treble, Fader, Balance), press the AUDIO driving so full attention may be given to
button until the desired mode (BAS, TRE, FAD Radio/Cassette tape priority mode vehicle operation.
or BAL) appears in the display.
In this mode, the radio station illuminates in the
Press the or button to adjust BASS display during radio operation. During cassette Push either manual tuning button or
and TREB to the desired level. Use the tape operation, TAPE illuminates in the dis- .
or button to adjust FADER or BAL play.
modes. FADER adjusts the sound level be- SEEK/SCAN tuning:
tween the front and rear speakers and BAL
Push the SEEK/SCAN tuning button or
adjusts the sound level between the right and
for less than 1.5 seconds. SEEK tuning
left speakers.
begins from high to low or low to high frequen-
After 10 seconds, the radio or cassette tape cies and stops at the next broadcasting sta-
4-16 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
tion. Pushing the button again continues the Station memory operations:
SEEK function. Once the highest broadcasting
Six stations can be set for the AM band. 12
station is reached, the radio continues in the
stations can be set for the FM band (six for
SEEK mode at the lowest broadcast station.
FM1, six for FM2).
Push the SEEK/SCAN tuning button or
for more than 1.5 seconds. SCAN illu- 1. Push the FM-AM band select button to
minates in the display window. SCAN tuning select AM, FM1, or FM2. The selected band
begins from high to low or low to high frequen- illuminates in the display.
cies and stops at each broadcasting station for 2. Tune to the desired station.
5 seconds. Pushing the button again during
this 5 second period stops SCAN tuning and 3. Push the desired select button for more
the radio remains tuned to that station. than 1.5 seconds. For example, in the
illustrations ch2 is to be memorized. The
radio mutes when the select button is
pushed.
4. When the sound resumes, memorizing is
complete.
5. Other station select buttons can be set in
the same manner.
If the battery cable is disconnected, or if the
radio fuse opens, the radio memory is can-
celled. In that case, reset the desired stations.
Cassette tape player operation
Turn the ignition key to ACC or ON, then
carefully insert a cassette tape into the tape
door.
The cassette tape automatically pulls into the
SAA0264 player. The word TAPE and moving digital
Heater, air conditioner and audio systems 4-17
Z 00.1.17/A33-D/V5.0 X
squares illuminate on the right side of the or REW button again, or the PLAY/STOP are trademarks of Dolby Laboratories
display window. button. Licensing Corporation.
Metal or chrome tape usage:
APS (automatic program
CAUTION search) FF, APS REW: The cassette player is automatically set to high
performance play when playing a metal or
Do not force the cassette tape into the Push either the APS FF or APS REW button chrome cassette tape.
tape door. This could cause player dam- while the cassette tape is playing. The tape
runs quickly, stops, then plays the next selec-
age. Ejecting the cassette tape:
tion. Either the FF or REW symbol flashes in
the display while searching for the selection. Push the EJECT button. The cassette tape
The cassette tape automatically changes di- automatically comes out.
This system searches at the blank intervals
rections to play the other side when the first between selections. If there is a blank interval
side is complete. At this time, the moving within one selection or there is no interval
digital squares illuminate on the left side of the between selections, the system may not stop
display window. in the desired or expected location.
PROG (program):
PLAY/STOP:
Push the PROG button. The moving digital
Push the PLAY/STOP button while the cas- squares illuminate on either the right or left
sette tape is playing to stop the tape. Push the side of the display window to indicate the side
button again to play the tape. of program play.
FF (fast forward), REW
(rewind): Dolby NR (Noise Reduction):
Push either the FF or REW button for the Push the Dolby NR button for Dolby NR
desired direction. encoded tapes to reduce high frequency tape
noise. The indicator light comes on.
The FF or REW symbol illuminates in the
Dolby NR is manufactured under license from
display.
Dolby Laboratories Licensing Corporation.
To stop the FF or REW function, press the FF DOLBY NR and the double-D symbol
4-18 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
FM-AM RADIO WITH CASSETTE
PLAYER AND COMPACT DISC
(CD) PLAYER
Audio main operation
Head unit
The radio has an FM diversity reception sys-
tem, which employs two antennas. One is a
rod type antenna; the other is an antenna
printed on the window. This system automati-
cally switches to the antenna which is receiv-
ing less noise.
The tape deck employs a permalloy head
which allows for improved reproduction of high
frequency ranges. Noise is also greatly re-
duced by the combined use of the Dolby NR
(Noise Reduction) system. The auto loudness
circuit enhances the low frequency range au-
tomatically in both radio reception and tape
and CD playback.
ON⋅OFF/Volume control:
Turn the ignition key to ACC or ON, and then
push the ON⋅OFF/VOL control knob while the
system is off to call up the mode (radio, tape or
CD) which was playing immediately before the
system was turned off. When no CD or tape is
loaded, the radio will come on. While the
SAA0380 system is on, pushing the ON⋅OFF/VOL con-
Heater, air conditioner and audio systems 4-19
Z 00.1.17/A33-D/V5.0 X
When FM/AM band select button is pushed
while the ignition switch is in the ACC or ON,
the radio will come on at the station last
played.
The last station played will also come on when
the power knob is turned to ON.
If a compact disc or tape is playing when the
FM/AM band select button is turned to ON, the
compact disc or tape will automatically be
turned off and the last radio station played will
come on.
The FM stereo indicator ST will glow during
SAA0381 FM stereo reception. When the stereo broad-
cast signal is weak, the radio will automatically
trol knob turns the system off. button also to adjust Fader (FAD) or
change from stereo to monaural reception.
Balance (BAL) modes. FAD adjusts the sound
To turn the radio off, press the ON⋅OFF/VOL
level between the front and rear speakers and
control knob. TUNE (Tuning):
BAL adjusts the sound between the right and
Turn the ON⋅OFF/VOL control knob to adjust left speakers. After 10 seconds, the radio or
the volume. cassette tape display reappears. Once the
sound quality is set to the desired level, press
WARNING
Adjusting tone quality and speaker
the AUDIO button repeatedly until the radio or
balance: The radio should not be tuned while
cassette tape display appears.
To adjust BASS, TRE (Treble), BAL (Balance) driving so full attention may be given to
and FAD (Fader), press the AUDIO button until FM-AM radio operation vehicle operation.
the desired mode BAS, TRE, FAD or BAL FM/AM band select:
appears in the display. Press the or
Pushing the FM/AM band select button will Use these buttons for manual tuning. To move
button to adjust Bass (BAS) and Treble
(TRE) to the desired level. Use the or change the band FM1, FM2 or AM. quickly through the channels, hold either of the
Z 00.1.17/A33-D/V5.0 X
TUNE buttons down for more than 0.5 sec- Station memory operations:
onds.
Twelve stations can be set for the FM band
SEEK/SCAN tuning: (six for FM1, six for FM2).
SEEK tuning: Six stations can be set for the AM band.
Push the SEEK/SCAN tuning button or 1. Tune to the desired station using the
for less than 1.5 seconds. SEEK tuning SEEK/SCAN or TUNE button.
begins from high to low or low to high frequen-
2. Push the desired station select button for
cies and stops at the next broadcasting sta-
more than 1.5 seconds. (For example, in
tion.
the diagram ch2 is to be memorized. The
SCAN tuning: radio mutes when the select button is
pushed.)
Push the SEEK/SCAN tuning button or
for more than 1.5 seconds. SCAN tuning 3. The indicator ch2 will then come on and the
begins from high to low or low to high frequen- sound will resume. Memorizing is now com-
cies and stops at each broadcasting station for plete.
10 seconds. Pushing the button again during
4. Other buttons can be set in the same
this 10 seconds period will stop SCAN tuning
manner.
and the radio will remain tuned to that station.
If the battery cable is disconnected, or if the
If the SEEK/SCAN tuning button is not pushed
fuse blows, the radio memory will be can-
within 10 seconds, SCAN tuning moves to the
celled. In that case, reset the desired stations.
next station.
Cassette tape player operation
Turn the ignition key to ACC or ON, and then
lightly insert the cassette tape into the tape
door. The cassette tape will be automatically
pulled into the player.
The radio or CD will turn off (if it is on) and the
SAA0382 cassette tape will begin to play.
Heater, air conditioner and audio systems 4-21
Z 00.1.17/A33-D/V5.0 X
tion, press the (fast forward) or (re- The cassette tape will automatically change
CAUTION wind) again, or the TAPE button. directions to play the other side when the first
side is completed.
APS (Automatic Program
Do not force the cassette tape into the Search) FF, APS REW: Dolby NR (Noise Reduction):
tape door. This could cause player dam-
When the (APS FF) button is pushed Push the Dolby NR button for Dolby NR
age.
while the tape is being played, the next pro- encoded tapes to reduce high frequency tape
gram will start to play from the beginning. Push noise. The indicator will come on.
If the system is turned off by pushing the the (APS FF) button several times to skip Dolby noise reduction manufactured under li-
ON⋅OFF/VOL control knob with the cassette through programs. The tape will advance the cense from Dolby Laboratories Licensing Cor-
tape still in the player, the tape will resume number of times the button is pushed (up to poration. Dolby NR and the double-D symbol
playing when the system is turned back on. nine programs). are trademarks of Dolby Laboratories
PLAY: When the (APS REW) button is pushed Licensing Corporation.
once, the program being played starts over
I When the TAPE button is pushed with the Metal or chrome tape usage:
from the beginning. Push the (APS
system turned off and a tape loaded, the REW) button several times to skip back sev- The cassette player will be automatically set to
system will come on and the tape will play. eral selections. The tape will go back the high performance play when playing a metal or
number of times the button is pushed. Either chrome cassette tape.
I When the TAPE button is pushed with
the FF or REW symbol flashes on the right
either the radio or compact disc turned on TAPE EJECT:
side of the display window while searching for
and the tape loaded, the compact disc or
the selection. When this button is pushed with the tape
the radio will automatically be turned off
and the tape will play. This system searches for the blank intervals loaded, the tape will be ejected.
between selections. If there is a blank interval When the tape is ejected while it is being
FF (Fast Forward), REW played, the system will be turned off.
within one program or there is no interval
(Rewind):
between programs, the system may not stop in
Push the (fast forward) button to fast the desired or expected location. Compact disc (CD) player operation
forward the tape. To rewind the tape, push the Turn the ignition key to the ACC or ON position
PROG (Program):
(rewind) button. Either the FF or REW and insert the compact disc into the slot with
symbol illuminates on the right side of the Push the PROG button to change the tape the label side facing up. The compact disc will
display window. To stop the FF or REW func- side while the tape is being played.
4-22 Heater, air conditioner and audio systems
Z 00.1.17/A33-D/V5.0 X
be guided automatically into the slot and start playing, the tape or radio will automatically be PROG (Program):
playing. turned off and the compact disc will start to
play. When the PROG button is pushed while the
After loading the disc, the number of tracks on compact disc is being played, the play pattern
the disc and the play time will appear on the FF (Fast Forward), REW will change as follows:
display. (Rewind):
no mark: All the programs will be played
If the radio or tape is already operating, it will When the (fast forward) or (rewind)
automatically turn off and the compact disc will repeatedly in sequence.
button is pushed while the compact disc is
play. being played, the compact disc will play while 1: Only one program (the one being played
fast forwarding or rewinding. When the button when the PROG button is pushed) will be
CAUTION is released, the compact disc will return to repeated.
normal play speed.
RANDOM: Programs will be played at random,
Do not force the compact disc into the APS (Automatic Program not following the sequence on the compact
slot. This could damage the player. Search) FF, APS REW: disc. The same program may be repeated
When the (APS FF) button is pushed twice.
while the compact disc is being played, the When the compact disc is ejected, the
If the system has been turned off while the
program next to the present one will start to
compact disc was playing, pushing the play pattern will automatically change to
play from its beginning. Push several times to
ON⋅OFF/VOL control knob will start the com- no mark.
skip through programs. The compact disc will
pact disc.
advance the number of times the button is CD EJECT:
8 cm diameter compact discs can also be used pushed. (When the last program on the com-
without an adapter. pact disc is skipped through, the first program When the CD EJECT button is pushed with the
will be played.) When the (APS REW) compact disc loaded, the compact disc will be
PLAY: ejected.
button is pushed, the program being played
When the CD/CHG button is pushed with the returns to its beginning. Push several times to When this button is pushed while the compact
system off and the compact disc loaded, the skip back through programs. The compact disc disc is being played, the compact disc will
system will turn on and the compact disc will will go back the number of times the button is
come out and the system will turn off.
start to play. pushed.
If the compact disc comes out and is not
When the CD/CHG button is pushed with the
removed, it will be pulled back into the slot
compact disc loaded but the tape or the radio
Heater, air conditioner and audio systems 4-23
Z 00.1.17/A33-D/V5.0 X
to protect it. (without 8 cm diameter com-
pact discs)
CD IN indicator:
CD IN indicator appears on the display when
the CD is loaded with the system on.
SAA0451 SAA0464
Z 00.1.17/A33-D/V5.0 X
CAR PHONE OR CB RADIO
Tuning or button for more than 1.5 sec- If equipped with a genuine NISSAN cellular
onds again. phone, your NISSAN features a non-
Memory change (radio): directional microphone in the steering column
ANTENNA cover, so it is not necessary to look at or speak
Push the tuning switch or for less
than 1.5 seconds to change the radio fre- Window antenna directly into the microphone when calling. To
quency. do so could detract from the driving operation
The antenna pattern is printed inside the rear and cause an accident. See the car phone
Seek tuning (radio): window. manual for operation.
Push the tuning switch or for more
Some models are pre-wired to accept the
than 1.5 seconds to seek the next or previous CAUTION genuine NISSAN cellular phone. In addition,
radio station.
the same model has the phone antenna built
APS (Automatic Program Search) FF, APS I Do not place metalized film near the into the rear glass window.
REW (tape/CD or CD changer): rear window glass or attach any metal
parts to it. This may cause poor re- When installing a CB, ham radio or car phone
Push the tuning switch or for less in your NISSAN, be sure to observe the follow-
1.5 seconds to return to the beginning of the ception or noise.
ing cautions, otherwise the new equipment
present program or skip to the next program. I When cleaning the inside of the rear may adversely affect the Engine control sys-
Push several times to skip back or skip
window, be careful not to scratch or tem and other electronic parts.
through programs.
damage the rear window antenna.
This system searches for the blank intervals Lightly wipe along the antenna with a
between selections. If there is a blank interval WARNING
dampened soft cloth.
within one program or there is no interval
between programs, the system may not stop in I A cellular telephone should not be
the desired or expected location. used while driving so full attention
FF REW (tape or CD changer): may be given to vehicle operation.
Some jurisdictions prohibit the use of
Push the tuning switch or for more cellular telephones while driving.
than 1.5 seconds to rewind or fast forward the
tape or to change the playing disc up or down.
To stop the FF or REW function, press the
Heater, air conditioner and audio systems 4-25
Z 00.1.17/A33-D/V5.0 X
I If you must make a call while your I Connect the ground wire from the CB
vehicle is in motion, the hands free radio chassis to the body.
cellular phone operational mode (if
I For details, consult an authorized
so equipped) is highly recommended.
NISSAN dealer.
Exercise extreme caution at all times
so full attention may be given to ve-
hicle operation.
I If a conversation in a moving vehicle
requires you to take notes, pull off the
road to a safe location and stop your
vehicle before doing so.
CAUTION
I Keep the antenna as far as possible
away from the Engine Control Module
(ECM).
I Keep the antenna wire more than 8 in
(20 cm) away from the Multiport Fuel
Injection harness. Do not route the
antenna wire next to any harness.
I Adjust the antenna standing-wave ra-
tio as recommended by the manufac-
turer.
Z 00.1.17/A33-D/V5.0 X
5 Starting and driving
Precautions when starting and driving...................... 5-2 Cruise control operations ................................... 5-14
Exhaust gas (Carbon monoxide).......................... 5-2 Break-in schedule ................................................... 5-15
Three way catalyst ............................................... 5-3 Increasing fuel economy ......................................... 5-16
Avoiding collision and rollover.............................. 5-3 Parking/parking on hills ........................................... 5-17
Drinking alcohol/drugs and driving ....................... 5-4 Power steering ........................................................ 5-18
Ignition switch............................................................ 5-4 Brake system .......................................................... 5-18
Automatic transmission ........................................ 5-4 Braking precautions............................................ 5-18
Manual transmission ............................................ 5-5 Anti-lock brake system (ABS) ........................... 5-19
Key positions ........................................................ 5-6 Traction control system (if so equipped)................. 5-20
Nissan Vehicle Immobilizer System .................... 5-6 Cold weather driving ............................................... 5-21
Before starting the engine......................................... 5-7 Freeing a frozen door lock ................................. 5-21
Starting the engine .................................................... 5-7 Anti-freeze .......................................................... 5-21
Driving the vehicle..................................................... 5-8 Battery ................................................................ 5-21
Automatic transmission ........................................ 5-8 Draining of coolant water ................................... 5-21
Manual transmission .......................................... 5-11 Tire equipment ................................................... 5-21
Parking brake .......................................................... 5-13 Special winter equipment ................................... 5-21
Cruise control .......................................................... 5-13 Driving on snow or ice ....................................... 5-22
Precautions on cruise control............................. 5-14 Engine block heater (if so equipped) ................. 5-22
Z 00.1.17/A33-D/V5.0 X
PRECAUTIONS WHEN STARTING
AND DRIVING
WARNING tain colorless and odorless carbon mon- nections must pass to a trailer
oxide. Carbon monoxide is dangerous. It through the seal on the trunk lid or
I Do not leave children, impaired can cause unconsciousness or death. the body, follow the manufacturer’s
recommendation to prevent carbon
adults, or pets alone in your vehicle. I If you suspect that exhaust fumes are
They could accidentally injure them- monoxide entry into the vehicle.
entering the vehicle, drive with all
selves or others through inadvertent windows fully open, and have the I If a special body or other equipment
operation of the vehicle. Also, on hot, vehicle inspected immediately. is added for recreational or other us-
sunny days, temperatures in a closed age, follow the manufacturer’s rec-
I Do not run the engine in closed
vehicle could quickly become high ommendation to prevent carbon
spaces such as a garage.
enough to cause severe or possibly monoxide entry into the vehicle.
fatal injuries to people or animals. I Do not park the vehicle with the en- (Some recreational vehicle appli-
gine running for any extended length ances such as stoves, refrigerator,
I Closely supervise children when they
of time. heaters, etc. may also generate car-
are around cars to prevent them from
bon monoxide.)
playing and becoming locked in the I Keep the trunk lid closed while driv-
trunk where they could be seriously ing, otherwise exhaust gases could I The exhaust system and body should
injured. Keep the car locked with the be drawn into the passenger com- be inspected by a qualified mechanic
trunk closed when not in use, and partment. If you must drive with the whenever:
prevent children’s access to car keys. trunk lid open, follow these precau-
a. The vehicle is raised for service.
tions:
b. You suspect that exhaust fumes
EXHAUST GAS (Carbon monoxide) 1. Open all the windows.
are entering into the passenger
2. Set the air recirculation switch compartment.
WARNING OFF and the fan control at 4 (high)
c. You notice a change in the sound
to circulate the air.
of the exhaust system.
Do not breathe exhaust gases; they con- I If electrical wiring or other cable con-
Z 00.1.17/A33-D/V5.0 X
AVOIDING COLLISION AND
d. You have had an accident involv- CAUTION ROLLOVER
ing damage to the exhaust system,
underbody, or rear of the vehicle. I Do not use leaded gasoline. Deposits
from leaded gasoline seriously re- WARNING
duce the three way catalyst’s ability
THREE WAY CATALYST Failure to operate this vehicle in a safe
to help reduce exhaust pollutants.
The three way catalyst is an emission control I Keep your engine tuned up. Malfunc- and prudent manner may result in loss
device installed in the exhaust system. Ex- tions in the ignition, fuel injection, or of control or an accident.
haust gases in the converter are burned at
electrical systems can cause over-
high temperatures to help reduce pollutants.
rich fuel flow into the three way cata- Be alert and drive defensively at all times.
lyst, causing it to overheat. Do not Obey all traffic regulations. Avoid excessive
WARNING keep driving if the engine misfires, or speed, high speed cornering, or sudden steer-
if noticeable loss of performance or ing maneuvers, because these driving prac-
I The exhaust gas and the exhaust sys- other unusual operating conditions tices could cause you to lose control of your
tem are very hot. Keep people, ani- are detected. Have the vehicle in- vehicle. As with any vehicle, a loss of con-
mals or flammable materials away spected promptly by an authorized trol could result in a collision with other
from the exhaust system compo- NISSAN dealer. vehicles or objects, or cause the vehicle to
nents. rollover, particularly if the loss of control
I Avoid driving with an extremely low
causes the vehicle to slide sideways. Be
I Do not stop or park the vehicle over fuel level. Running out of fuel could
attentive at all times, and avoid driving when
flammable materials such as dry cause the engine to misfire, damag-
tired. Never drive when under the influence of
grass, waste paper or rags. They may ing the three way catalyst. alcohol or drugs (including prescription or
ignite and cause a fire.
I Do not race the engine while warming over-the-counter drugs which may cause
it up. drowsiness). Always wear your seat belt. See
“Seat Belts” in the “1. Seats, restraints and
I Do not push or tow your vehicle to
supplemental air bag systems” section. And
start the engine.
also instruct your passengers to do so.
Z 00.1.17/A33-D/V5.0 X
IGNITION SWITCH
WARNING
Never drive under the influence of alco-
hol or drugs. Alcohol in the bloodstream
reduces coordination, delays reaction
time and impairs judgment. Driving after
drinking alcohol increases the likeli-
hood of being involved in an accident
injuring yourself and others. Addition-
ally, if you are injured in the accident, SSD0083
alcohol can increase the severity of the
injury. AUTOMATIC TRANSMISSION
On automatic transmission models, the igni-
NISSAN is committed to safe driving. But, you tion lock is designed so that the key cannot be
must choose not to drive under the influence of turned to LOCK and removed until the selector
alcohol. Every year thousands of people are lever is moved to the P (Park) position.
injured or killed in alcohol related accidents. When removing the key from the ignition,
Although the local laws vary on what is con- make sure the selector lever is in the P (Park)
sidered to be legally intoxicated, the fact is that position.
alcohol affects all people differently and most
people underestimate the effects of alcohol. If the selector lever is not returned to P (Park)
position, the key cannot be moved toward
Remember, drinking and driving don’t mix! LOCK.
And that’s true for drugs too (over the counter, When the key cannot be turned toward the
prescription, and illegal drugs). Don’t drive if
5-4 Starting and driving
Z 00.1.17/A33-D/V5.0 X
LOCK position, proceed as follows to remove
the key: WARNING
1. Move the selector lever into the P (Park)
position. Never remove or turn the key to the
LOCK position while driving. The steer-
2. Turn the ignition key slightly in the ON
ing wheel will lock. This may cause the
direction.
driver to lose control of the vehicle and
3. Turn the key toward the LOCK position. could result in serious vehicle damage
4. Remove the key. or personal injury.
Z 00.1.17/A33-D/V5.0 X
To lock the steering wheel, turn the key to KEY POSITIONS the registered Nissan Vehicle Immobilizer Sys-
the LOCK position. Remove the key. To tem key.
unlock the steering wheel, insert the key The switch includes an anti-theft steering lock
device. If the engine fails to start using the registered
and turn it gently while rotating the steer-
Nissan Vehicle Immobilizer System key, it may
ing wheel slightly right and left. LOCK (Normal parking position) (0) be due to interference caused by another
Nissan Vehicle Immobilizer System key, an
The ignition key can only be removed when
WARNING the switch is in this position.
automated toll road device or automated pay-
ment device on the key ring. Restart the en-
Never remove or turn the key to the OFF (1) gine using the following procedures:
LOCK position while driving. The steer- The engine can be turned off without locking 1. Leave the ignition switch in the ON position
ing wheel will lock. This may cause the the steering wheel. for approximately 5 seconds.
driver to lose control of the vehicle and
ACC (Accessories) (2) 2. Turn the ignition switch to the OFF or LOCK
could result in serious vehicle damage position and wait approximately 10 sec-
or personal injury. This position activates electrical accessories onds.
such as the radio when the engine is not
running. 3. Repeat step 1 and 2 again.
4. Restart the engine while holding the device
ON (Normal operating position) (3)
(which may have caused the interference)
This position turns on the ignition system and separate from the registered Nissan Ve-
the electrical accessories. hicle Immobilizer System key.
START (4) If this procedure allows the engine to start,
NISSAN recommends placing the registered
This position activates the starter motor, start- Nissan Vehicle Immobilizer System key on a
ing the engine. separate key ring to avoid interference from
other devices.
NISSAN VEHICLE IMMOBILIZER
SYSTEM
The Nissan Vehicle Immobilizer System will
not allow the engine to start without the use of
5-6 Starting and driving
Z 00.1.17/A33-D/V5.0 X
BEFORE STARTING THE ENGINE STARTING THE ENGINE
I Make sure the area around the vehicle is 1. Apply the parking brake. I In the summer, when restarting the
clear. engine within 30 minutes after it has
2. Automatic transmission: been stopped, keep the accelerator
I Maintenance items listed here should be
Move the selector lever to P (Park) or N pedal fully depressed while starting.
checked periodically, e.g., each time you
check engine oil. (Neutral). (P preferred.)
I Check that all windows and lights are clean. The selector lever cannot be moved out of CAUTION
P (Park) position and into any of the other
I Visually inspect tires for their appearance gear positions if the key is removed from Do not operate the starter for more than
and condition. Also check tires for proper the switch. 15 seconds at a time. If the engine does
inflation. not start, turn the key off and wait 10
The starter is designed not to operate if the
I Lock all doors. seconds before cranking again, other-
selector lever is in one of the driving posi-
I Position seat and adjust head restraints. tions. wise the starter could be damaged.
Z 00.1.17/A33-D/V5.0 X
DRIVING THE VEHICLE
The automatic transmission in your vehicle is 2. Release the parking brake and foot brake, CAUTION
electronically controlled by a transmission con- then gradually start the vehicle in motion.
trol module to produce maximum power and When stopping the vehicle on an uphill
smooth operation. WARNING grade, do not hold the vehicle by de-
pressing the accelerator pedal. The foot
Shown on the following pages are the recom- brakes should be used for this purpose.
mended operating procedures for this trans- I Do not depress the accelerator pedal
mission. Follow these procedures for maxi- while shifting from P or N to R, D, 2 or
mum vehicle performance and driving 1. Always depress the brake pedal
enjoyment. until shifting is completed. Failure to
do so could cause you to lose control
Starting the vehicle
and have an accident.
After starting the engine, fully depress the foot
brake pedal and push the selector lever button I Cold engine idle speed is high, so use
before shifting the selector lever to the R, N, D, caution when shifting into a forward
2 or 1 position. Be sure the vehicle is fully or reverse gear before the engine has
stopped before attempting to shift the selector warmed up.
lever.
I On slippery roads, do not downshift.
This automatic transmission is designed This may cause a loss of control.
so that the foot brake pedal must be de-
pressed before shifting from P (Park) posi- I Never shift to P or R while vehicle is
tion to any drive position while the ignition moving. This could cause an acci-
switch is ON. dent.
The selector lever cannot be moved out of
P (Park) position and into any of the other
gear positions if the key is removed from
the switch.
1. Keep the foot brake pedal depressed and
5-8 Starting and driving
Z 00.1.17/A33-D/V5.0 X
the parking brake first, then shift the lever into Do not exceed 37 MPH (60 km/h) in the 1 (Low
the P (Park) position. gear) position.
R (Reverse):
Use this position to back up. Always be sure
the vehicle is completely stopped. With the
brake pedal depressed, push in the select
lever button and move the lever to the R
(Reverse) position
N (Neutral):
Neither forward nor reverse gear is engaged.
The engine can be started in this position. You
may shift to N (Neutral) position and restart a
SD1003M
stalled engine while the vehicle is moving.
Shifting D (Drive):
Push the button to shift into P, R or from D to Use this position for all normal forward driving.
2. All other positions can be selected without
pushing the button. 2 (Second gear):
Z 00.1.17/A33-D/V5.0 X
To move the select lever, push the shift lock
release button and select lever button. The
select lever can be moved to N (Neutral).
To push the shift lock release button using a
screwdriver or other tool, follow the procedure
as illustrated.
If the lever cannot be moved out of P (Park)
have your NISSAN dealer check the automatic
transmission system as soon as possible.
WARNING
If the selector lever cannot be moved SSD0110
from the P position while the engine is
running and the brake pedal is de- Overdrive switch
pressed, the stop lights may not work.
Each time your vehicle is started, the transmis-
Malfunctioning stop lights could cause sion is automatically reset to overdrive ON.
an accident injuring yourself and others.
ON: For normal driving the overdrive switch
is engaged. The transmission is up-
Accelerator downshift shifted into overdrive as the vehicle
SSD0151 — In D position — speed increases.
Shift lock release For rapid passing or hill climbing, fully depress The overdrive does not engage until the
the accelerator pedal to the floor. This shifts engine has warmed up.
If the battery charge is low, the select lever
the transmission down into second gear or first OFF: Changed for driving up and down long
may not move from the P position even with gear, depending on the vehicle speed.
the brake pedal depressed and the select lever slopes where engine braking would be
button pushed. advantageous, push the overdrive
switch. The O/D OFF light illuminates.
5-10 Starting and driving
Z 00.1.17/A33-D/V5.0 X
When cruising at a low speed or climb- OFF and wait for 3 seconds. Then turn the
ing a gentle slope, you may feel uncom- key back to the ON position. The vehicle
fortable shift shocks as the transmission should return to its normal operating con-
shifts between third and overdrive re- dition. If it does not return to its normal
peatedly. In this case, press the over- operating condition, have your NISSAN
drive switch. The O/D OFF indicator light dealer check the transmission and repair if
comes on at this time. necessary.
Z 00.1.17/A33-D/V5.0 X
tral), then release the clutch pedal and shift Suggested up-shift speeds Suggested maximum speed in each
into R (Reverse) or 1 (Low gear) again. gear
Shown below are suggested vehicle speeds
for shifting into a higher gear. These sugges- Downshift to a lower gear if the engine is not
WARNING tions relate to fuel economy and vehicle per- running smoothly, or if you need to accelerate.
formance. Actual up-shift speeds will vary ac-
I Do not downshift abruptly on slippery cording to road conditions, the weather and Do not exceed the maximum suggested speed
roads. This may cause a loss of con- individual driving habits. (shown below) in any gear. For level road
driving, use the highest gear suggested for
trol. For normal acceleration in low altitude areas that speed. Always observe posted speed
I Do not over-rev the engine when [less than 4,000 ft (1,219 m)]: limits, and drive according to the road condi-
shifting to a lower gear. This may ACCEL shift CRUISE shift tions, which will ensure safe operation. Do not
cause a loss of control or engine Gear change point point over-rev the engine when shifting to a lower
damage. MPH (km/h) MPH (km/h) gear as it may cause engine damage or loss of
1st to 2nd 13 (21) 13 (21) vehicle control.
2nd to 3rd 23 (37) 16 (26) Gear MPH (km/h)
CAUTION 3rd to 4th 33 (53) 27 (43) 1st 30 (48)
4th to 5th 39 (63) 36 (58) 2nd 55 (88)
I Do not rest your foot on the clutch 3rd 80 (128)
For quick acceleration when the engine is cold
pedal while driving. This may cause or in high altitude areas [over 4,000 ft (1,219 4th —
clutch damage. m)]: 5th —
I Stop your vehicle completely before Gear change MPH (km/h)
shifting into R (Reverse).
1st to 2nd 15 (24)
I When the vehicle is stopped for a 2nd to 3rd 25 (40)
period of time, for example at a stop 3rd to 4th 40 (64)
light, shift to N (Neutral) and release
4th to 5th 45 (72)
the clutch pedal with the foot brake
applied.
Z 00.1.17/A33-D/V5.0 X
PARKING BRAKE CRUISE CONTROL
Z 00.1.17/A33-D/V5.0 X
I To pass another vehicle, depress the
engine damage. accelerator pedal. When you release the
pedal, the vehicle will return to the previ-
ously set speed.
PRECAUTIONS ON CRUISE
CONTROL I The vehicle may not maintain the set speed
when going up or down steep hills. If this
I If the cruise control system malfunctions, it happens, drive without the cruise control.
cancels automatically. The SET indicator
light on the meter panel then blinks to warn To cancel the preset speed, follow either of
the driver. these three methods:
I If the SET indicator light blinks, turn the a) Push the cancel switch; The SET indicator
cruise control main switch off and have the light will go out.
system checked by your NISSAN dealer. b) Tap the brake pedal; The SET indicator
SSD0193
I The SET indicator light may blink when the light will go out.
cruise control main switch is turned on CRUISE CONTROL OPERATIONS c) Turn the main switch off. Both the CRUISE
while pushing the RES/ACCEL, COAST/ indicator and SET indicator lights will go
SET, or CANCEL switch (located on the The cruise control allows driving at a speed out.
steering wheel). To properly set the cruise between 25 to 89 MPH (40 to 144 km/h)
control system, perform the preceding without keeping your foot on the accelerator I If you depress the brake pedal while push-
steps in the order indicated. pedal. ing the RES/ACCEL set switch and reset at
the cruising speed, turn the main switch off
To turn on the cruise control, push the main once and then turn it on again.
switch on. The CRUISE indicator light on the
meter panel will come on. I The cruise control will automatically be can-
celled if the vehicle slows down below
To set at cruising speed, accelerate your approximately 8 MPH (13 km/h).
vehicle to the desired speed, push the
COAST/SET switch and release it. (The SET I Depress the clutch pedal (manual transmis-
indicator light will come on.) Take your foot off sion), or move the selector lever to N (Neu-
the accelerator pedal. Your vehicle will main- tral) position (automatic transmission). The
tain the set speed. SET indicator light will go out.
5-14 Starting and driving
Z 00.1.17/A33-D/V5.0 X
BREAK-IN SCHEDULE
To reset at a faster cruising speed, use one the vehicle speed is over 25 MPH (40 km/h). During the first 1,000 miles (1,600 km), follow
of the following three methods: these recommendations for the future reliabil-
ity and economy of your new vehicle.
a) Depress the accelerator pedal. When the
vehicle attains the desired speed, push and I Avoid driving for long periods at constant
release the COAST/SET switch. speed, either fast or slow.
b) Push and hold the RES/ACCEL set switch. I Do not accelerate at full throttle in any gear.
When the vehicle attains the speed you I Avoid quick starts.
desire, release the switch.
I Avoid hard braking as much as possible.
c) Push, then quickly release the RES/ACCEL
set switch. Each time you do this, the set I Do not tow a trailer for the first 500 miles
speed will increase by about 1 MPH (1.6 (800 km).
km/h).
To reset at a slower cruising speed, use one
of the following three methods:
a) Lightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
COAST/SET switch and release it.
b) Push and hold the COAST/SET switch.
Release the switch when the vehicle slows
down to the desired speed.
c) Push, then quickly release the COAST/
SET switch. Each time you do this, the set
speed will decrease by about 1 MPH (1.6
km/h).
To resume the preset speed, push and re-
lease the RES/ACCEL set switch. The vehicle
will resume the last set cruising speed when
Starting and driving 5-15
Z 00.1.17/A33-D/V5.0 X
INCREASING FUEL ECONOMY
Z 00.1.17/A33-D/V5.0 X
PARKING/PARKING ON HILLS
WARNING
I Safe parking procedures require that
both the parking brake be set and the
transmission placed into P (Park) for
automatic transmission models or in
an appropriate gear for manual trans-
mission models. Failure to do so
could cause the vehicle to move un-
expectedly or roll away and result in
an accident.
Z 00.1.17/A33-D/V5.0 X
POWER STEERING BRAKE SYSTEM
Z 00.1.17/A33-D/V5.0 X
To help save the brakes and to prevent the system helps the driver maintain steering con- conditions are hazardous and extra care is
brakes from overheating, reduce speed and trol and helps to minimize swerving and spin- required while driving.
downshift to a lower gear before going down a ning on slippery surfaces.
slope or long grade. Overheated brakes may Self-test feature
reduce braking performance and could result Using the system
The anti-lock brake system consists of elec-
in loss of vehicle control. Depress the brake pedal and hold it down. tronic sensors, electric pumps, and hydraulic
solenoids controlled by a computer. The com-
WARNING WARNING puter has a built-in diagnostic feature that tests
the system each time you start the engine and
move the vehicle at a low speed in forward or
I While driving on a slippery surface, Do not pump the brake pedal. Doing so reverse. When the self-test occurs, you may
be careful when braking, accelerating may result in increased stopping dis- hear a clunk noise and/or feel a pulsation in
or downshifting. Abrupt braking or tances. the brake pedal. This is normal and is not an
accelerating could cause the wheels indication of any malfunction. If the computer
to skid and result in an accident. senses any malfunction, it switches the anti-
Normal operation lock brake system OFF and turns on the ABS
I If the engine is not running or is
turned off while driving, the power The anti-lock brake system will not operate at warning light in the dashboard. The brake
speeds below 3 to 6 MPH (5 to 10 km/h) to system will then behave normally, but without
assist for the brakes will not work.
completely stop the vehicle. (The speeds will anti-lock assistance.
Braking will be harder.
vary according to road conditions.) When the If the light comes on during the self check, or
anti-lock system senses that one or more while you are driving, you should take your
ANTI-LOCK BRAKE SYSTEM (ABS) wheels are close to locking up, the actuator vehicle to your NISSAN dealer for repair at
(under the hood) rapidly applies and releases your earliest convenience.
The anti-lock brake system controls the brakes hydraulic pressure (like pumping the brakes
at each wheel so the wheels will not lock when very quickly). While the actuator is working,
braking abruptly or when braking on slippery you may feel a pulsation in the brake pedal
WARNING
surfaces. The system detects the rotation and hear a noise or vibration from the actuator
speed at each wheel and varies the brake fluid under the hood. This is normal and indicates The anti-lock brake system is a sophis-
pressure to prevent each wheel from locking that the anti-lock system is working properly. ticated device, but it cannot prevent ac-
and sliding. By preventing wheel lockup, the However, the pulsation may indicate that road
Starting and driving 5-19
Z 00.1.17/A33-D/V5.0 X
TRACTION CONTROL SYSTEM (if
so equipped)
On slippery surfaces such as wet asphalt
cidents resulting from careless or dan- roads, vehicle wheels may spin when the on, this could cause the three way
gerous driving techniques. It can help vehicle is accelerated. This wheel spin re- catalyst to overheat and be damaged.
maintain vehicle control during braking duces acceleration, or causes the vehicle to To avoid this, the TCS will automati-
on slippery surfaces, but remember that swerve, thus decreasing vehicle stability. cally turn off. Shifting the gear selec-
the stopping distance on slippery sur- tor to D will reactivate the TCS.
The traction control system helps limit wheel
faces will be longer than on normal spin on slippery roads. The system operates
surfaces, even with the anti-lock sys- only if it senses one or both of the front wheels
tem. Stopping distances may also be spinning or beginning to lose traction. When WARNING
longer on rough, gravel or snow covered this happens, the system reduces engine
roads, or if you are using tire chains. power and may also upshift the transmission This system is designed to prevent the
Always maintain a safe distance from to help limit wheel spin. wheels from spinning. However, it does
the vehicle in front of you. Ultimately,
I Indicator light not prevent vehicle slipping or spinning
the responsibility for safety of self and
If a malfunction occurs in the traction con- due to abrupt steering operation at high
others rests in the hands of the driver.
trol system, the SLIP and indicator speeds or by careless or dangerous
Tire type and condition of tires may also lights come on in the meter panel. driving techniques. Be especially care-
affect braking effectiveness. As long as these warning lights are on, the ful when driving on slippery surfaces
traction control function is canceled. The and always drive safely.
I When replacing tires, install the vehicle will behaves like a model without
specified size of tires on all four the traction control system.
wheels.
I When installing a spare tire, make CAUTION
sure it is the proper size and type as
specified on the tire placard. See “Ve- I The traction control system is most
hicle identification” in the “10. Tech- effective when the transmission gear
nical and consumer information” sec- selector is in the D position.
tion for tire placard location. I If you drive in gear 1 or 2 with the TCS
Z 00.1.17/A33-D/V5.0 X
COLD WEATHER DRIVING
FREEING A FROZEN DOOR LOCK the “8. Do-it-yourself” section for changing installing tire chains. When installing tire
engine coolant. chains, make sure they are of proper size
To prevent a door lock from freezing, apply for the tires on your vehicle and are in-
de-icer or glycerin to it through the key hole. If TIRE EQUIPMENT stalled according to the chain manufactur-
the lock becomes frozen, heat the key before er’s suggestions. Use only SAE Class S
1. SUMMER tires are of a tread design to
inserting it into the key hole. chains. Other types may damage your
provide superior performance on dry pave-
ANTI-FREEZE ment. However, the performance of these vehicle. Use chain tensioners when recom-
tires will be substantially reduced in snowy mended by the tire chain manufacturer to
In the winter when it is anticipated that the and icy conditions. If you operate your ensure a tight fit. Loose end links of the tire
temperature will drop below 32°F (0°C), check vehicle on snowy or icy roads, NISSAN chain must be secured or removed to pre-
anti-freeze (ethylene glycol base) to assure recommends the use of MUD & SNOW or vent the possibility of whipping action dam-
proper winter protection. For additional infor- ALL SEASON tires on all four wheels. age to the fenders or underbody. If pos-
mation, see “Engine Cooling System” in the “8. Please consult your NISSAN dealer for the sible, avoid fully loading your vehicle when
Do-it-yourself” section. tire type, size, speed rating and availability using tire chains. In addition, drive at a
information. reduced speed. Otherwise, your vehicle
BATTERY may be damaged and/or vehicle handling
2. For additional traction on icy roads, studded and performance may be adversely af-
If the battery is not fully charged during ex-
tires may be used. However, some prov- fected.
tremely cold weather conditions, the battery inces and states prohibit their use. Check
fluid may freeze and damage the battery. To local, state and provincial laws before in- Never install tire chains on a T-type spare
maintain maximum efficiency, the battery stalling studded tires. tire. Do not use tire chains on dry roads.
should be checked regularly. For additional
information, see “Battery” in the “8. Do-it- Skid and traction capabilities of studded SPECIAL WINTER EQUIPMENT
yourself” section. snow tires, on wet or dry surfaces, may be
It is recommended that the following items be
poorer than that of non-studded snow tires.
carried in the vehicle during winter:
DRAINING OF COOLANT WATER
3. Tire chains may be used if desired. Make
I a scraper and stiff-bristled brush to remove
If the vehicle is to be left outside without sure they are of proper size for the tires on
ice and snow from the windows and wiper
anti-freeze, drain the cooling system by open- your vehicle and are installed according to
blades.
ing the drain valves located under the radiator the chain manufacturer’s suggestions. Use
and on the engine block. Refill before operat- of tire chains may be prohibited according I a sturdy, flat board to be placed under the
ing the vehicle. See “Engine cooling system” in to location. Check the local laws before jack to give it firm support.
Starting and driving 5-21
Z 00.1.17/A33-D/V5.0 X
I a shovel to dig the vehicle out of snow-
drifts. I Watch for slippery spots (glare ice). pronged (cheater) adapters. You can be
These may appear on an otherwise injured by an electrical shock if you use
I extra window washer fluid to refill the res-
clear road in shaded areas. If a patch an ungrounded connection.
ervoir tank.
of ice is seen ahead, brake before
DRIVING ON SNOW OR ICE reaching it. Try not to brake while
actually on the ice, and avoid any
WARNING sudden steering maneuvers.
I Do not use cruise control on slippery
I Wet ice (32°F, 0°C and freezing rain), roads.
very cold snow or ice can be slick and
very hard to drive on. The vehicle will I Snow can trap dangerous exhaust
have a lot less traction or grip under gases under your vehicle. Keep snow
these conditions. Try to avoid driving clear of the exhaust pipe and from
on wet ice until the road is salted or around your vehicle.
sanded.
I Whatever the condition, drive with ENGINE BLOCK HEATER (if so
caution. Accelerate and slow down equipped)
with care. If accelerating or down-
An engine block heater to assist extreme cold
shifting too fast, the drive wheels will temperature starting is available through your
lose even more traction. NISSAN dealer.
I Allow more stopping distance under
these conditions. Braking should be WARNING
started sooner than on dry pavement.
I Allow greater following distances on Do not use your heater with an un-
slippery roads. grounded electrical system or two-
Z 00.1.17/A33-D/V5.0 X
6 In case of emergency
Z 00.1.17/A33-D/V5.0 X
FLAT TIRE
Z 00.1.17/A33-D/V5.0 X
SCE0289
CAUTION
Do not use your hands to pry off wheel
caps. Doing so could result in personal
SCE0299 SCE0288 injury.
Z 00.1.17/A33-D/V5.0 X
SCE0286 CE1089
Z 00.1.17/A33-D/V5.0 X
I Use the correct jack up points; never
use any other part of the vehicle for
jack support.
I Never jack up the vehicle more than
necessary.
I Never use blocks on or under the
jack.
I Do not start or run engine while ve-
hicle is on the jack, as it may cause
the vehicle to move. This is especially
true for vehicles with limited slid dif-
CE1092
ferential carriers.
The jack should be used on level firm I Do not allow passengers to stay in
ground. WARNING the vehicle while it is on the jack.
2. Loosen each wheel nut one or two turns by
turning counterclockwise with the wheel nut I Never get under the vehicle while it is
wrench. Do not remove the wheel nuts supported only by the jack.
until the tire is off the ground.
I Use only the jack provided with your
3. Carefully raise the vehicle until the tire vehicle to lift the vehicle. Do not use
clears the ground. To lift the vehicle, se-
the jack provided with your vehicle
curely hold the jack lever and rod with both
hands as shown above. Remove the wheel on other vehicles.
nuts, and then remove the tire. The jack is designed only for lifting
your vehicle during a tire change.
Z 00.1.17/A33-D/V5.0 X
WARNING WARNING
I Incorrect wheel nuts or improperly Retighten the wheel nuts when the ve-
tightened wheel nuts can cause the hicle has been driven for 600 miles
wheel to become loose or come off. (1,000 km) (also in cases of a flat tire,
This could cause an accident. etc.).
I Do not use oil or grease on the wheel
studs or nuts. This could cause the
nuts to become loose.
2. Carefully put the wheel on and tighten the Adjust tire pressure to the COLD pressure.
wheel nuts finger tight. COLD pressure:
3. With the wheel nut wrench, tighten wheel After vehicle has been parked for three
nuts alternately and evenly until they are hours or more or driven less than 1 mile
tight. (1.6 km).
4. Lower the vehicle slowly until the tire COLD tire pressures are shown on the tire
touches the ground. Then, with the wheel placard affixed to the center console lid.
nut wrench, tighten the wheel nuts securely
in the sequence as illustrated.
Z 00.1.17/A33-D/V5.0 X
JUMP STARTING
Z 00.1.17/A33-D/V5.0 X
I The booster battery must be rated at
12 volts. Use of an improperly rated
battery can damage your vehicle.
I Whenever working on or near a bat-
tery, always wear suitable eye protec-
tors (for example, goggles or indus-
trial safety spectacles) and remove
rings, metal bands, or any other jew-
elry. Do not lean over the battery
when jump starting.
I Do not attempt to jump start a frozen
battery. It could explode and cause SCE0154A
serious injury.
the N (Neutral) position (On automatic
I Your vehicle has an automatic engine WARNING transmission models, move the selector
cooling fan. It could come on at any lever to the P (Park) position). Switch off all
time. Keep hands and other objects unnecessary electrical systems (light,
Always follow the instructions below.
away from it. heater, air conditioner, etc.).
Failure to do so could result in damage
to the charging system and cause per- 3. Remove vent caps on the battery (if so
sonal injury. equipped). Cover the battery with an old
cloth to reduce explosion hazard.
4. Connect jumper cables in the sequence as
1. If the booster battery is in another vehicle,
illustrated.
position the two vehicles to bring their bat-
teries into close proximity to each other.
Do not allow the two vehicles to touch.
2. Apply parking brake. Move the shift lever to
6-8 In case of emergency
Z 00.1.17/A33-D/V5.0 X
PUSH STARTING
CAUTION
Do not keep starter motor engaged for
more than 10 seconds. If the engine
does not start right away, turn the key
off and wait 3 to 4 seconds before trying
again.
Z 00.1.17/A33-D/V5.0 X
IF YOUR VEHICLE OVERHEATS
If your vehicle is overheating (indicated by an 5. Visually check if the cooling fan is running.
extremely high temperature gauge reading), or The radiator hoses and radiator should not
if you feel a lack of engine power, detect leak water.
abnormal noise, etc., take the following steps: If coolant is leaking or the cooling fan does
1. Move the vehicle safely off the road, apply not run, stop the engine.
the parking brake and move the shift lever
to the N (Neutral) position (automatic trans- WARNING
mission to the P (Park) position).
Do not stop the engine. I Be careful not to allow your hands,
2. Turn off the air conditioner switch. Open all hair, jewelry or clothing to come into
the windows, move the heater or air condi-
6-10 In case of emergency
Z 00.1.17/A33-D/V5.0 X
TOWING YOUR VEHICLE
WARNING
I Never ride in a vehicle that is being
towed.
I Never get under your vehicle after it
has been lifted by a tow truck.
SCE0202
Z 00.1.17/A33-D/V5.0 X
ground or four wheels on the ground transmission models with the rear
(forward or backward) as this may wheels on the ground (if you do not
cause serious and expensive damage use towing dollies): Always release
to the transmission. the parking brake.
If it is necessary to tow the vehicle
with the rear wheels raised, always
use towing dollies under the front
VEHICLE RECOVERY (Freeing a
wheels. stuck vehicle)
I When towing automatic transmission I Tow chains or cables must be attached only
to the main structural members of the ve-
models with the front wheels on tow-
hicle.
ing dollies, or when towing manual
transmission models with the front I Pulling devices should be routed so they do
wheels on the ground: not touch any part of the suspension, steer-
ing, brake or cooling systems.
I Turn the ignition key to the OFF
I Always pull the cable straight out from the
position, and secure the steering
front or rear of the vehicle. Never pull on the
wheel in a straight ahead position vehicle at an angle.
with a rope or similar device.
Never secure the steering wheel I Pulling devices such as ropes or canvas
by turning the ignition key to the straps are not recommended for use in
vehicle towing or recovery.
SCE0199 LOCK position. This may damage
the steering lock mechanism. I Stand clear of an stuck vehicle.
Z 00.1.17/A33-D/V5.0 X
WARNING
Do not spin your tires at high speed.
This could cause them to explode and
result in serious injury. Parts of your
vehicle could also overheat and be dam-
aged.
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
7 Appearance and care
Z 00.1.17/A33-D/V5.0 X
CLEANING EXTERIOR
Z 00.1.17/A33-D/V5.0 X
specified for use over clear coats, such as causing underbody and suspension corrosion.
Nissan Liquid or Spray Wax. Your Nissan Before the winter period and again in the
dealer can assist you in choosing the proper spring, the underseal must be checked and, if
product. necessary, re-treated.
I Wax your vehicle only after a thorough
washing. Follow the instructions supplied
with the wax.
I Do not use a wax containing any abrasives,
cutting compounds or cleaners that may
damage the vehicle finish.
I If the surface does not polish easily, use a
road tar remover and wax again.
SAI0014A
Machine compounding or aggressive pol-
ishing on a base coat/clear coat paint finish GLASS
may dull the finish or leave swirl marks.
When cleaning the rear window, it may be
REMOVING SPOTS easier to clean if the high-mounted stop light is
removed first.
Remove tar and oil spots, industrial dust, in-
sects, and tree sap as quickly as possible from Be careful when removing the high-mounted
the surface of the paint to avoid lasting dam- stop light to reduce the risk of damaging the
age or staining. Special cleaning products are high-mounted stop light wires.
available at your NISSAN dealer or any auto-
motive accessory store. The high-mounted stop light must be properly
reinstalled before driving your vehicle.
UNDERBODY
Use glass cleaner to remove smoke and dust
In areas where road salt is used in winter, the film from the glass surfaces. It is normal for
underbody must be cleaned regularly. This will glass to become coated with a film after the
prevent dirt and salt from building up and vehicle is parked in the hot sun. Glass cleaner
Appearance and care 7-3
Z 00.1.17/A33-D/V5.0 X
CLEANING INTERIOR
and a soft cloth will easily remove this film. Occasionally remove loose dust from the inte- FLOOR MATS
rior trim, plastic parts and seats using a
vacuum cleaner or soft brush. Wipe the vinyl The use of Genuine Nissan floor mats can
CAUTION and leather surfaces with a clean, soft cloth extend the life of your vehicle carpet and make
dampened in mild soap solution, then wipe it easier to clean the interior. No matter what
When cleaning the inside of the window, clean with a dry soft cloth. Before using any mats are used, be sure they are fitted for
do not use sharp-edged tools, abrasive fabric protector, read the manufacturer’s rec- your vehicle and are properly positioned in
cleaners or chlorine based disinfectant ommendations. Some fabric protectors con- the footwell to prevent interference with
cleaners. They could damage the elec- tain chemicals that may stain or bleach the pedal operation. Mats should be maintained
seat material. with regular cleaning and replaced if they
trical conductors, radio antenna ele-
become excessively worn.
ments or rear window defogger ele- Use a cloth dampened only with water, to
ments. clean the meter and gauge lens.
Z 00.1.17/A33-D/V5.0 X
CORROSION PROTECTION
Z 00.1.17/A33-D/V5.0 X
Temperature
A temperature increase will accelerate the rate
CAUTION
of corrosion to those parts which are not well
ventilated. I NEVER remove dirt, sand or other
debris from the passenger compart-
Air pollution ment by washing it out with a hose.
Industrial pollution, the presence of salt in the Remove dirt with a vacuum cleaner or
air in coastal areas, or heavy road salt use will broom.
accelerate the corrosion process. Road salt
I Never allow water or other liquids to
will also accelerate the disintegration of paint
surfaces. come in contact with electronic com-
ponents inside the vehicle as this
TO PROTECT YOUR VEHICLE may damage them.
FROM CORROSION:
I Wash and wax your vehicle often to keep Chemicals used for road surface de-icing are
the vehicle clean. extremely corrosive. They accelerate corro-
I Always check for minor damage to the paint sion and deterioration of underbody compo-
and repair it as soon as possible. nents such as the exhaust system, fuel and
brake lines, brake cables, floor pan and fend-
I Keep drain holes at the bottom of the doors ers.
open to avoid water accumulation.
In winter, the underbody must be cleaned
I Check the underbody for accumulation of periodically.
sand, dirt or salt. If present, wash with water
as soon as possible. For additional protection against rust and cor-
rosion, which may be required in some areas,
consult your local NISSAN dealer.
Z 00.1.17/A33-D/V5.0 X
8 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
MAINTENANCE PRECAUTIONS
8-2 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
engine oil, engine coolant and/or
other vehicle fluids can hurt the envi-
ronment. Always conform to local
regulations for disposal of vehicle
fluid.
Do-it-yourself 8-3
Z 00.1.17/A33-D/V5.0 X
ENGINE COMPARTMENT CHECK
LOCATIONS
SDI1183
8-4 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
ENGINE COOLING SYSTEM
Z 00.1.17/A33-D/V5.0 X
I Improper servicing can result in reduced 4. Close the radiator drain plug and the drain
heater performance and engine overheat- plug on the engine block securely.
ing. 5. See “Capacities and recommended
fuel/lubricants” in the “10. Technical and
WARNING consumer information” section for cooling
system capacity. Fill the radiator slowly with
I To avoid the danger of being scalded, the proper mixture of coolant and water. Fill
never change the coolant when the the reservoir tank up to the MAX level. Then
engine is hot. install the radiator cap.
I Never remove the radiator cap when
the engine is hot. Serious burns
could be caused by high pressure
fluid escaping from the radiator.
I Avoid direct skin contact with used
coolant. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.
I Keep coolant out of reach of children
and pets.
Z 00.1.17/A33-D/V5.0 X
ENGINE OIL
SDI0973 SDI0115
6. Start the engine, and warm it up until the CHECKING ENGINE OIL LEVEL
radiator fan operates. Then race the engine
two or three times under no load. Watch the 1. Park the vehicle on a level surface and
coolant temperature gauge for signs of apply parking brake.
overheating. 2. Run the engine until it reaches operating
7. Stop the engine. After it completely cools temperature.
down, refill the radiator up to the filler 3. Turn off the engine. Wait more than 10
opening. Fill the reservoir tank up to the minutes for the oil to drain back into the
MAX level. oil pan.
8. Check the radiator drain plug and the drain 4. Remove the dipstick and wipe it clean.
plug on the engine block for any sign of Reinsert it all the way.
leakage.
Do-it-yourself 8-7
Z 00.1.17/A33-D/V5.0 X
CAUTION
Oil level should be checked regularly.
Operating with insufficient amount of oil
can damage the engine, and such dam-
age is not covered by warranty.
SDI0534 SDI0974
5. Remove the dipstick again and check the CHANGING ENGINE OIL
oil level. It should be between the H and L
marks. If the oil level is below the L mark, 1. Park the vehicle on a level surface and
remove the oil filler cap and pour recom- apply the parking brake.
mended oil through the opening. Do not 2. Run the engine until it reaches operating
overfill. temperature.
6. Recheck oil level with dipstick. 3. Turn the engine off and wait more than 10
It is normal to add some oil between oil minutes.
maintenance intervals or during the 4. Place a large drain pan under the drain
break-in period, depending on the severity plug.
of operating conditions.
5. Remove the oil filler cap.
8-8 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
6. Remove the drain plug with a wrench and refill capacity. The drain and refill capacity
completely drain the oil. depends on the oil temperature and drain
time. Use these specifications for reference
If oil filter is to be changed, remove and only. Always use the dipstick to determine
replace it at this time. See later in “Engine when the proper amount of oil is in the
oil” for changing engine oil filter. engine.
9. Start the engine.
CAUTION
Check for leakage around the drain plug.
Correct as required.
Be careful not to burn yourself, as the
engine oil is hot. 10.Turn the engine off and wait more than 10
minutes. Check the oil level with the dip-
stick. Add engine oil if necessary.
I Waste oil must be disposed of properly.
11.Dispose of waste oil in the proper manner. SDI0975
I Check your local regulations.
CHANGING ENGINE OIL FILTER
7. Clean and re-install the drain plug and new WARNING
washer. Securely tighten the drain plug with 1. Park the vehicle on a level surface and
a wrench. I Prolonged and repeated contact with apply the parking brake.
Drain plug tightening torque: used engine oil may cause skin can- 2. Turn the engine off.
cer.
22 to 29 ft-lb 3. Loosen the oil filter with an oil filter wrench.
(29 to 39 N⋅m) I Try to avoid direct skin contact with (Depending on the engine model, a special
used oil. If skin contact is made, wash cap type wrench may be required. See
Do not use excessive force. your NISSAN dealer if in doubt.) Remove
thoroughly with soap or hand cleaner
8. Refill engine with recommended oil and as soon as possible. the oil filter by turning it by hand.
install the cap securely.
I Keep used engine oil out of reach of
See “Capacities and recommended children.
fuel/lubricants” in the “10. Technical and
consumer information” section for drain and
Do-it-yourself 8-9
Z 00.1.17/A33-D/V5.0 X
AUTOMATIC TRANSMISSION
FLUID
TEMPERATURE CONDITIONS
CAUTION FOR CHECKING
I The fluid level should be checked using the
Be careful not to burn yourself, as the HOT range on the dipstick after the follow-
engine oil may be hot. ing conditions have been met:
a) the engine should be warmed up to
4. Wipe the engine oil filter mounting surface operating temperature.
with a clean rag.
b) the vehicle should be driven at least 5
Be sure to remove any old rubber gasket minutes.
remaining on the mounting surface of the
engine. c) the automatic transmission fluid should
be warmed to between 122 and 176°F
5. Coat the rubber gasket on the new filter (50 and 80°C).
with clean engine oil. SSD0161
I The fluid can be checked at fluid tempera-
6. Screw in the oil filter until a slight resistance tures of 86 to 122°F (30 to 50°C) using the
is felt, then tighten additionally more than WARNING COLD range on the dipstick after the en-
2/3 turn. gine is warmed up and before driving. How-
Oil filter tightening torque: I When engine is running, keep hands, ever, the fluid should be re-checked using
jewelry and clothing away from any the HOT range.
10.85 to 15.19 ft-lb
(14.7 to 20.6 N⋅m) moving parts such as cooling fan and 1. Park the vehicle on a level surface and set
drive belt. the parking brake.
7. Start the engine and check for leakage
around the oil filter. Correct as required. I Automatic transmission fluid is poi- 2. Start the engine and then move the selector
sonous and should be stored care- lever through each gear range. Move the
8. Turn the engine off and wait several min- selector lever to P (Park) position after you
fully in marked containers out of the
utes. Check the oil level. Add engine oil if have moved it through all ranges.
necessary. reach of children.
8-10 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
POWER STEERING FLUID
CAUTION
I Do not overfill.
I Use only NISSAN Matic D (Continen-
tal US and Alaska) or Canada Nissan
automatic transmission fluid.
DexronTMIII/MerconTM or equivalent
may also be used. Outside the conti-
nental US and Alaska contact a
NISSAN dealer for more information
regarding suitable fluids, including
SDI1232 recommended brand(s) of DexronTM SDI1076
III/MerconTM automatic transmission
3. Check the fluid level with the engine idling. fluid. Check the fluid level in the reservoir tank.
4. Remove the dipstick and wipe it clean with The fluid level should be checked using the
lint-free paper. HOT range at fluid temperatures of 122 to
NOTE:
176°F (50 to 80°C) or using the COLD range at
5. Reinsert the dipstick into the charging pipe
If the vehicle has been driven for a long fluid temperatures of 32 to 86°F (0 to 30°C).
as far as it will go.
time at high speeds, or in city traffic in hot
6. Remove the dipstick and note the reading. weather, or if it is being used to pull a CAUTION
If the level is at the low side of either range, trailer, the accurate fluid level cannot be
add fluid to the charging pipe. read. You should wait until the fluid has I Do not overfill.
cooled down (about 30 minutes).
I Use Genuine Nissan PSFII or equiva-
lent.
Do-it-yourself 8-11
Z 00.1.17/A33-D/V5.0 X
BRAKE AND CLUTCH FLUID WINDOW WASHER FLUID
CAUTION
Do not spill the fluid on painted sur-
faces. This will damage the paint. If fluid
is spilled, wash with water.
SDI0119 SDI0961
8-12 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
BATTERY
Do-it-yourself 8-13
Z 00.1.17/A33-D/V5.0 X
If jump starting is necessary, see “Jump start-
tery which can generate heat, reduce ing” the “6. In case of emergency” section. If
battery life, and in some cases lead to the engine does not start by jump starting, the
an explosion. battery may have to be replaced. Contact your
NISSAN dealer.
I When working on or near a battery,
always wear suitable eye protection
and remove all jewelry.
I Battery posts, terminals and related
accessories contain lead and lead
compounds. Wash hands after han-
dling.
I Keep the battery out of the reach of
DI0137M
children.
Check the fluid level in each cell. It should be
between the MAX and MIN lines.
If it is necessary to add fluid, add only distilled
water to bring the level to the indicator in each
filler opening. Do not overfill.
1. Remove the cell plugs.
2. Add distilled water up to the MAX level.
3. Tighten cell plugs.
8-14 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
DRIVE BELTS SPARK PLUGS
CAUTION
Be sure to use the correct socket to
remove the spark plugs. An incorrect
SDI0141 socket can damage the spark plugs.
WARNING
Be sure the ignition key is in the OFF or
LOCK position. The engine could rotate
unexpectedly.
Do-it-yourself 8-15
Z 00.1.17/A33-D/V5.0 X
AIR CLEANER
REPLACING SPARK PLUGS The filter element should not be cleaned and
reused. Replace it according to the mainte-
Platinum-tipped spark plugs nance intervals. See “Periodic maintenance
It is not necessary to replace the platinum- schedules” in the “9. Maintenance” section for
tipped spark plugs as frequently as the con- maintenance intervals. When replacing the
ventional type spark plugs since they will last filter, wipe the inside of the air cleaner housing
much longer. Follow the maintenance sched- and the cover with a damp cloth.
ule but, do not reuse them by cleaning or
regapping. WARNING
If replacement is required, see your NISSAN
dealer for servicing. I Operating the engine with the air
Always replace with recommended cleaner removed can cause you or
platinum-tipped spark plugs. others to be burned. The air cleaner
8-16 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
WINDSHIELD WIPER BLADES
CLEANING
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the windshield with a
washer solution or a mild detergent. Your
windshield is clean if beads do not form when
rinsing with clear water.
Clean the blade by wiping it with a cloth
soaked in a washer solution or a mild deter-
gent. Then rinse the blade with clear water. If
your windshield is still not clear after cleaning DI1018M
the blades and using the wiper, replace the
blades. REPLACEMENT
1. Pull the wiper arm.
CAUTION
2. Push the lock pin, then remove the wiper After wiper blade replacement, return
blade. the wiper arm to its original position.
3. Insert the new wiper blade to the wiper arm
Otherwise it may be damaged when the
until a click sounds.
engine hood is opened.
Make sure the wiper blade contacts the
glass, otherwise the arm may be dam-
aged from wind pressure.
Do-it-yourself 8-17
Z 00.1.17/A33-D/V5.0 X
PARKING BRAKE AND BRAKE
PEDAL
SDI0125 DI1020MH
8-18 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
CLUTCH PEDAL
BRAKE BOOSTER
WARNING Check the brake booster function as follows:
See your NISSAN dealer and have it 1. With the engine off, press and release the
checked if the brake pedal height does brake pedal several times. When brake
pedal movement (distance of travel) re-
not return to normal.
mains the same from one pedal application
to the next, continue on to the next step.
Brake pad wear indicators 2. While depressing the brake pedal, start the
The disc brake pads on your vehicle have engine. The pedal height should drop a
audible wear indicators. When a brake pad little.
requires replacement, it will make a high 3. With the brake pedal depressed, stop the
pitched scraping or screeching sound when engine. Keeping the pedal depressed for
the vehicle is in motion whether or not the about 30 seconds, the pedal height should DI1021MC
brake pedal is depressed. Have the brakes not change.
checked as soon as possible if the wear indi- Press the pedal by hand and be sure the free
cator sound is heard. 4. Run the engine for one minute without travel is within the limits shown above. If free
depressing the brake pedal, then turn it off. travel is too little or too much, see your
Under some driving or climate conditions, oc- Depress the brake pedal several times. The NISSAN dealer.
casional brake squeak, squeal or other noise pedal travel distance will decrease gradu-
may be heard. Occasional brake noise during ally with each depression as the vacuum is
light to moderate stops is normal and does not released from the booster.
affect the function or performance of the brake
system. If the brakes do not operate properly, see your
NISSAN dealer.
Proper brake inspection intervals should
be followed. For additional information, see
“Periodic maintenance schedules” in the “9.
Maintenance” section for maintenance inter-
vals.
Do-it-yourself 8-19
Z 00.1.17/A33-D/V5.0 X
FUSES
SDI0964
ENGINE COMPARTMENT
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition key and headlight
switch are OFF.
2. Open the engine hood.
3. Remove the fusible link cover.
4. Remove the fuse with the fuse puller.
5. If the fuse is open, replace it with a new
fuse.
6. If a new fuse also opens, have the electrical
8-20 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
SDI0965 SDI0966
Z 00.1.17/A33-D/V5.0 X
MULTI-REMOTE CONTROLLER
BATTERY REPLACEMENT
Make sure that the ⊕ side faces the Industry Canada. Operation is subject to
bottom case. the following two conditions: (1) This de-
vice may not cause harmful interference,
3. Close the lid securely. and (2) this device must accept any inter-
4. Push the remote controller button two or ference received, including interference
three times to check its operation. that may cause undesired operation of the
device.
See your NISSAN dealer if you need any
assistance for replacement.
If the battery is removed for any reason
other than replacement, perform step 4
above.
I Be careful not to touch a circuit board
and a battery terminal.
I An improperly disposed battery can
harm the environment. Always confirm
local regulations for battery disposal.
I The remote controller is water-resistant;
however, if it does get wet, immediately
wipe completely dry.
I When changing batteries, do not let dust
SPA1046 or oil get on the controller.
Replace the battery as follows: FCC Notice:
1. Open the lid using a suitable tool. Changes or modifications not expressly
approved by the manufacturer compliance
2. Replace the battery with a new one.
could void the user’s authority to operate
Recommended battery: Sanyo CR2025 or the equipment. This device complies with
equivalent Part 15 of the FCC Rules and RSS-210 of
8-22 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
LIGHTS
SDI0976
Do-it-yourself 8-23
Z 00.1.17/A33-D/V5.0 X
HEADLIGHTS Replacing the headlight bulb
The headlight is a semi-sealed beam type 1. Disconnect the battery negative cable.
which uses a replaceable headlight (halogen)
2. Disconnect the electrical connector from
bulb. A bulb can be replaced from inside the
the rear end of the bulb.
engine compartment without removing the
headlight assembly. 3. Pull off the rubber cap.
4. Push and turn the retaining pin to loosen it.
CAUTION
5. Remove the headlight bulb. Do not shake
or rotate the bulb when removing it.
High pressure halogen gas is sealed
inside the halogen bulb. The bulb may 6. Install the new bulb in the reverse order of
break if the glass envelope is scratched removal.
or the bulb is dropped. Aiming is not necessary after replacing the
bulb. When aiming adjustment is neces-
When handling the bulb, do not touch sary, contact your NISSAN dealer.
the glass envelope.
SDI0967
8-24 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
EXTERIOR AND INTERIOR LIGHTS
CAUTION
Item Wattage (W) Bulb No.
I Do not touch the bulb. Front turn signal/Clearance light 27/8 S25
I Use the same number and wattage as Front side marker light 3.8 T10
originally installed: See an authorized NISSAN
Wattage 60/55 Front fog light (if so equipped)
dealer for assistance.
Bulb no. HB2
Rear combination light
I Do not leave the bulb out of the head-
Turn signal 21 PY21W
light reflector for a long period of time
as dust, moisture, and smoke may Stop/Tail 21/5 T20
enter the headlight body and affect
Back-up 13 T16
the performance of the headlight.
Rear side marker light 3.8 T10
License plate light 5
Interior light 10
Do-it-yourself 8-25
Z 00.1.17/A33-D/V5.0 X
SDI0968
MDI0006
Replacement procedures
All other lights are either type A, B, C or D.
When replacing a bulb, first remove the lens
and/or cover.
SDI0969
8-26 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
SDI0970
Do-it-yourself 8-27
Z 00.1.17/A33-D/V5.0 X
SDI0972
8-28 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
SDI0333A
SDI0971 SDI0756
Do-it-yourself 8-29
Z 00.1.17/A33-D/V5.0 X
TIRES AND WHEELS
Z 00.1.17/A33-D/V5.0 X
all year around, including snowy and icy road If you operate your vehicle in snowy or icy Never install tire chains on a T-type spare tire.
conditions. All season tires are identified by conditions, NISSAN recommends the use of Do not use the chains on dry roads.
ALL SEASON and/or M&S on the tire sidewall. snow or all season tires on all four wheels.
Snow tires have better snow traction than all
For additional traction on icy roads, studded
season tires and may be more appropriate in
tires may be used. However, some provinces
some areas.
and states prohibit their use. Check local, state
Summer tires and provincial laws before installing studded
tires. Skid and traction capabilities of studded
NISSAN specifies summer tires on some mod- snow tires, on wet or dry surfaces, may be
els to provide superior performance on dry poorer than that of non-studded snow tires.
roads. Summer tire performance in snow and
ice will be substantially reduced. Summer tires TIRE CHAINS
do not have the tire traction rating M&S on the
Use of tire chains may be prohibited according
tire sidewall.
to location. Check the local laws before install-
If you operate your vehicle in snowy or icy ing tire chains. When installing tire chains,
conditions, NISSAN recommends the use of make sure they are of proper size for the tires
snow or all season tires on all four wheels. on your vehicle and are installed according to
the chain manufacturer’s suggestions. Use
Snow tires only SAE class S chains. Other types may
damage your vehicle. Use chain tensioners
If snow tires are needed, it is necessary to
when recommended by the tire chain manu-
select tires equivalent in size and load rating to
facturer to ensure a tight fit. Loose end links of
the original equipment tires. If you do not, it
the tire chain must be secured or removed to
can adversely affect the safety and handling of
prevent the possibility of whipping action dam-
your vehicle.
age to the fenders or undercarriage. If pos-
Generally, snow tires will have lower speed sible, avoid fully loading your vehicle when
ratings than factory equipped tires and may using tire chains. In addition, drive at a re-
not match the potential maximum vehicle duced speed. Otherwise, your vehicle may be
speed. Never exceed the maximum speed damaged and/or vehicle handling and perfor-
rating of the tire. mance may be adversely affected.
Do-it-yourself 8-31
Z 00.1.17/A33-D/V5.0 X
WARNING
I After rotating the tires, adjust the tire
pressure.
I Retighten the wheel nuts when the
vehicle has been driven for 600 miles
(1,000 km) (also in cases of a flat tire,
etc.).
I Do not include the T-type spare tire or
any other small size spare tire in the
tire rotation.
DI0048-B MDI0004
8-32 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
Wheel balance service should be performed
Improper service for a T-type spare tire accidents and could result in serious with the wheels off the vehicle. Spin balancing
may result in serious personal injury. If it personal injury. the front wheels on the vehicle could lead to
is necessary to repair the T-type spare transmission damage.
I If the wheels are changed for any
tire, contact your NISSAN dealer.
reason, always replace with wheels Care of wheels
which have the same offset dimen-
sion. Wheels of a different offset I Wash the wheels when washing the vehicle
Replacing tires and wheels to maintain their appearance.
could cause early tire wear, possibly
When replacing a tire, use the same size, degraded vehicle handling character- I Clean the inner side of the wheels when the
speed rating and load carrying capacity as istics and/or interference with the wheel is changed or the underside of the
originally equipped. See “Specifications” in the vehicle is washed.
brake discs. Such interference can
“10. Technical and consumer information” sec-
lead to decreased braking efficiency I Do not use abrasive cleaners when wash-
tion for recommended types and sizes of tires
and/or early brake pad wear. ing the wheels.
and wheels.
I Do not install a deformed wheel or I Inspect wheel rims regularly for dents or
WARNING tire even if it has been repaired. Such corrosion. Such damage may cause loss of
wheels or tires could have structural pressure or poor seal at the tire bead.
I The use of tires other than those damage and could fail without warn-
I NISSAN recommends that the road wheels
recommended or the mixed use of ing.
be waxed to protect against road salt in
tires of different brands, construction I The use of retread tire is not recom- areas where it is used during winter.
(bias, bias-belted or radial), or tread mended.
patterns can adversely affect the ride, Spare tire (T-type spare tire)
braking, handling, ground clearance, US only. Canadian vehicles are equipped with
body-to-tire clearance, tire chain Wheel balance a full size spare tire.
clearance, speedometer calibration, Unbalanced wheels may affect vehicle han- Observe the following precautions if the T-type
headlight aim and bumper height. dling and tire life. Even with regular use, spare tire must be used, otherwise your ve-
Some of these effects may lead to wheels can get out of balance. Therefore, they hicle could be damaged or involved in an
should be balanced as required. accident.
Do-it-yourself 8-33
Z 00.1.17/A33-D/V5.0 X
CAUTION spare tire. Tire chains will not fit prop- spare tire at the same time.
erly on the T-type spare tire and may
I Do not tow a trailer while the T-type
I The T-type spare tire should be used cause damage to the vehicle.
spare tire is installed.
only for emergency. It should be re- I When driving on roads covered with
placed by the standard tire at the first snow or ice, the T-type spare tire
opportunity. should be used on the rear wheel and
I Drive carefully while the T-type spare the original tire used on the front
tire is installed. wheels (drive wheels). Use tire chains
only on the front two original tires.
Avoid sharp turns and abrupt braking
while driving. I Tire tread of the T-type spare tire will
wear at a faster rate than the original
I Periodically check the T-type spare tire. Replace the T-type spare tire as
tire inflation pressure, and always soon as the tread wear indicators
keep it at 60 psi (420 kPa, 4.2 bar). appear.
I Always keep the pressure of the full I Because the T-type spare tire is
size spare tire (if so equipped) at the smaller than the original tire, ground
recommended pressure for standard clearance is reduced. To avoid dam-
tires, as indicated on the tire placard. age to the vehicle do not drive over
For tire placard location, see “Tire obstacles. Also do not drive the ve-
placard” in the “10. Technical and hicle through an automatic car wash
consumer information”. since it may get caught.
I Do not drive your vehicle at speeds I Do not use the T-type spare tire on
faster than 50 MPH (80 km/h). other vehicles.
I Do not use tire chains on a T-type I Do not use more than one T-type
8-34 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
MEMO
Do-it-yourself 8-35
Z 00.1.17/A33-D/V5.0 X
MEMO
8-36 Do-it-yourself
Z 00.1.17/A33-D/V5.0 X
9 Maintenance
Z 00.1.17/A33-D/V5.0 X
Your new NISSAN has been designed to have However, under severe driving conditions, ad-
minimum maintenance requirements with ditional or more frequent maintenance will be
longer service intervals to save you both time required.
and money. However, some day-to-day and Where to go for service:
regular maintenance is essential to maintain
your NISSAN’s good mechanical condition, as If maintenance service is required or your
well as its emission and engine performance. vehicle appears to malfunction, have the sys-
tems checked and tuned by an authorized
It is the owner’s responsibility to make sure NISSAN dealer.
that the specified maintenance, as well as
general maintenance, is performed. NISSAN technicians are well-trained special-
ists and are kept up to date with the latest
As the vehicle owner, you are the only one service information through technical bulletins,
who can ensure that your vehicle receives the service tips, and in-dealership training pro-
proper maintenance care. You are a vital link grams. They are completely qualified to work
in the maintenance chain. on NISSAN’s vehicles before they work on
your vehicle, rather than after they have
General maintenance: worked on it.
General maintenance includes those items You can be confident that your NISSAN deal-
which should be checked during normal day- er’s service department performs the best job
to-day operation of the vehicle. They are es- to meet the maintenance requirements on your
sential if your vehicle is to continue to operate vehicle — in a reliable and economic way.
properly. It is your responsibility to perform
these procedures regularly as prescribed.
These checks or inspections can be done by
yourself, a qualified technician or, if you prefer,
your NISSAN dealer.
Periodic maintenance:
The maintenance items listed in this part are
required to be serviced at regular intervals.
9-2 Maintenance
Z 00.1.17/A33-D/V5.0 X
GENERAL MAINTENANCE
During the normal day-to-day operation of the loose nuts. Tighten if necessary. performing periodic maintenance, cleaning the
vehicle, general maintenance should be per- vehicle, etc.
Tire rotation*: Tires should be rotated every
formed regularly as prescribed in this section.
7,500 miles (12,000 km). Lights*: Make sure that the headlights, stop
If you detect any unusual sounds, vibrations or
lights, tail lights, turn signal lights, and other
smell, be sure to check for the cause or have Wheel alignment and balance: If the vehicle
your NISSAN dealer do it promptly. In addition, lights are all operating properly and installed
pulls to either side while driving on a straight
you should notify your NISSAN dealer if you securely. Also check headlight aim.
and level road, or if you detect uneven or
think that repairs are required. abnormal tire wear, there may be a need for Warning lights and chimes: Make sure that
When performing any checks or maintenance wheel alignment. all warning lights and chimes are operating
work, see “Maintenance precautions” in the “8. properly.
If the steering wheel or seat vibrates at normal
Do-it-yourself” section. highway speeds, wheel balancing may be Windshield wiper and washer*: Check that
EXPLANATION OF MAINTENANCE needed. the wipers and washer operate properly and
ITEMS that the wipers do not streak.
Windshield wiper blades*: Check for cracks
Additional information on the following or wear if they do not wipe properly. Windshield defroster: Check that the air
items with “*” is found in the “8. Do-it- comes out of the defroster outlets properly and
Doors and engine hood: Check that all doors
yourself” section. in good quantity when operating the heater or
and the engine hood operate smoothly as well
air conditioner.
Outside the vehicle as the trunk lid or back hatch. Also make sure
that all latches lock securely. Lubricate if nec- Steering wheel: Check for changes in the
The maintenance items listed here should be essary. Make sure that the secondary latch steering conditions, such as excessive free
performed from time to time, unless otherwise keeps the hood from opening when the pri- play, hard steering or strange noises.
specified. mary latch is released. Seats: Check seat position controls such as
Tires*: Check the pressure with a gauge pe- When driving in areas using road salt or other seat adjusters, seatback recliner, etc. to en-
riodically when at a service station, including corrosive materials, check lubrication fre- sure they operate smoothly and that all latches
the spare, and adjust to the specified pressure quently. lock securely in every position. Check that the
if necessary. Check carefully for damage, cuts head restraints move up and down smoothly
or excessive wear. Inside the vehicle and that the locks (if equipped) hold securely
in all latched positions.
Wheel nuts*: When checking the tires, make The maintenance items listed here should be
sure no nuts are missing, and check for any checked on a regular basis, such as when Seat belts: Check that all parts of the seat belt
Maintenance 9-3
Z 00.1.17/A33-D/V5.0 X
system (for example, buckles, anchors, adjust- Under the hood and the vehicle off. Check the lines for proper attachment,
ers and retractors) operate properly and leaks, cracks, etc.
smoothly, and are installed securely. Check The maintenance items listed here should be
checked periodically (for example, each time Automatic transaxle fluid level*: Check the
the belt webbing for cuts, fraying, wear or
you check the engine oil or refuel). level on the dipstick after putting the selector
damage.
lever in P (Park) position with the engine idling.
Accelerator pedal: Check the pedal for Windshield washer fluid*: Check that there
is adequate fluid in the tank. Exhaust system: Make sure there are no
smooth operation and make sure the pedal
loose supports, cracks or holes. If the sound of
does not catch or require uneven effort. Keep Engine coolant level*: Check the coolant
the floor mats away from the pedal. the exhaust seems unusual or there is a smell
level when the engine is cold. of exhaust fumes, immediately locate the
Clutch pedal*: Make sure the pedal operates Radiator and hoses: Check the front of the trouble and correct it. (See “Precautions when
smoothly and check that it has the proper free radiator and clean off any dirt, insects, leaves, starting and driving” in the “5. Starting and
play. driving” section for exhaust gas (carbon mon-
etc., that may have accumulated. Make sure
oxide).)
Brakes: Check that the brakes do not pull the the hoses have no cracks, deformation, dete-
vehicle to one side when applied. rioration or loose connections. Underbody: The underbody is frequently ex-
posed to corrosive substances such as those
Brake pedal and booster*: Check the pedal Brake and clutch fluid levels*: Make sure used on icy roads or to control dust. It is very
for smooth operation and make sure it has the that the brake and clutch fluid levels are be- important to remove these substances, other-
proper distance under it when depressed fully. tween the MAX and MIN lines on the reservoir. wise rust will form on the floor pan, frame, fuel
Check the brake booster function. Be sure to
Battery*: Check the fluid level in each cell. It lines and around the exhaust system. At the
keep floor mats away from the pedal.
should be between the MAX and MIN lines. end of winter, the underbody should be thor-
Parking brake*: Check that the lever has the oughly flushed with plain water, being careful
proper travel and make sure that the vehicle is Engine drive belts*: Make sure that no belt is to clean those areas where mud and dirt may
held securely on a fairly steep hill when only frayed, worn, cracked or oily. accumulate. For additional information, see
the parking brake is applied. “Cleaning exterior” in the “7. Appearance and
Engine oil level*: Check the level on the
care” section.
Automatic transaxle P (Park) position dipstick after parking the vehicle on a level
mechanism: On a fairly steep hill check that spot and turning off the engine. Fluid leaks: Check under the vehicle for fuel,
the vehicle is held securely with the selector oil, water or other fluid leaks after the vehicle
lever in the P (Park) position without applying Power steering fluid level* and lines: Check has been parked for a while. Water dripping
any brakes. the level in the reservoir tank with the engine from the air conditioner after use is normal. If
9-4 Maintenance
Z 00.1.17/A33-D/V5.0 X
PERIODIC MAINTENANCE
SCHEDULES
you should notice any leaks or if gasoline To ensure smooth, trouble-free, safe and eco- I driving in dusty conditions.
fumes are evident, check for the cause and nomical driving, NISSAN provides two differ-
I driving on rough, muddy, or salt spread
have it corrected immediately. ent maintenance schedules that may be used, roads.
depending upon the conditions in which you
usually drive. These schedules contain both I towing a trailer, using a camper or a
distance and time intervals, up to 60,000 miles car-top carrier.
(96,000 km)/48 months. For most people, the
odometer reading will indicate when service is SCHEDULE 2
needed. However, if you drive very little, your Follow Periodic Maintenance Schedule 2 if
vehicle should be serviced at the regular time none of the driving conditions shown in Sched-
intervals shown in the schedule. After 60,000 ule 1 apply to your driving habits.
miles (96,000 km) or 48 months, continue
the periodic maintenance at the same
mileage/time intervals.
SCHEDULE 1
Follow Periodic Maintenance Schedule 1 if
your driving habits frequently include one or
more of the following driving conditions:
I repeated short trips of less than 5 miles
(8 km).
I repeated short trips of less than 10 miles
(16 km) with outside temperatures re-
maining below freezing.
I operating in hot weather in stop-and-go
rush hour traffic.
I extensive idling and/or low speed driv-
ing for long distances, such as police,
taxi or door-to-door delivery use.
Maintenance 9-5
Z 00.1.17/A33-D/V5.0 X
Schedule 1
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATION MAINTENANCE INTERVAL
Perform at number of miles, Miles x 1,000 3.8 7.5 11.3 15 18.8 22.5 26.3 30 33.8 37.5 41.3 45 48.8 52.5 56.3 60
kilometers or months, which- (km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96)
ever comes first. Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48
Emission control system maintenance
Drive belts See NOTE (1) I*
Air cleaner filter See NOTE (2) [R] [R]
EVAP vapor lines I* I*
Fuel lines I* I*
Fuel filter See NOTE (3)
Engine coolant See NOTE (4) R*
Engine oil R R R R R R R R R R R R R R R R
Engine oil filter (Use part No. 15208-31U01 or equivalent) R R R R R R R R R R R R R R R R
Spark plugs (Use PLATINUM-TIPPED type) Replace every 105,000 miles (169,000 km)
Intake & exhaust valve clear-
See NOTE (5)
ance*
NOTE: (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months.
(2) If operating mainly in dusty conditions, more frequent maintenance may be required.
(3) Maintenance free item
(4) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months.
(5) If valve noise increases, inspect valve clearance.
★ Maintenance items and intervals with “*” are recommended by NISSAN for reliable vehicle operation. The owner need not
perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance
items and intervals are required.
9-6 Maintenance
Z 00.1.17/A33-D/V5.0 X
Schedule 1
Abbreviations: I = Inspect. Correct or replace if necessary.
MAINTENANCE OPERATION MAINTENANCE INTERVAL
Miles x 1,000 3.8 7.5 11.3 15 18.8 22.5 26.3 30 33.8 37.5 41.3 45 48.8 52.5 56.3 60
Perform at number of miles, kilometers or (km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96)
months, whichever comes first.
Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48
Exhaust system I I I I I I I I
NOTE: (1) If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) oil at
every 30,000 miles (48,000 km) or 24 months.
(2) Inspect the supplemental air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S. certification label.
(3) Refer to “Tire rotation” under the “General maintenance” heading earlier in this section.
Maintenance 9-7
Z 00.1.17/A33-D/V5.0 X
Schedule 2
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATION MAINTENANCE INTERVAL
Miles x 1,000 7.5 15 22.5 30 37.5 45 52.5 60
Perform at number of miles, kilometers
or months, whichever comes first. (km x 1,000) (12) (24) (36) (48) (60) (72) (84) (96)
Months 6 12 18 24 30 36 42 48
Emission control system maintenance
Drive belts See NOTE (1) I*
Air cleaner filter [R] [R]
EVAP vapor lines I* I*
Fuel lines I* I*
Fuel filter See NOTE (2)
Engine coolant See NOTE (3) R*
Engine oil R R R R R R R R
Engine oil filter (Use part No. 15208-31U01 or equivalent) R R R R R R R R
Spark plugs (Use PLATINUM-TIPPED type) Replace every 105,000 miles (169,000 km)
Intake & exhaust valve clearance* See NOTE (4)
NOTE: (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months.
(2) Maintenance free item
(3) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months.
(4) If valve noise increases, inspect valve clearance.
★ Maintenance items and intervals with “*” are recommended by NISSAN for reliable vehicle operation. The owner need not
perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance
items and intervals are required.
9-8 Maintenance
Z 00.1.17/A33-D/V5.0 X
Schedule 2
Abbreviations: I = Inspect. Correct or replace if necessary.
MAINTENANCE OPERATION MAINTENANCE INTERVAL
Exhaust system I I
NOTE: (1) Inspect the supplemental air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S. certification label.
(2) Refer to “Tire rotation” under the “General maintenance” heading earlier in this section.
Maintenance 9-9
Z 00.1.17/A33-D/V5.0 X
EXPLANATION OF MAINTENANCE conditions, the engine oil and oil filter should damage, looseness and leakage of oil or
ITEMS be replaced in accordance with the mainte- grease. Under severe driving conditions, they
nance schedule. However, under severe driv- may have to be inspected more frequently.
Additional information on the following ing conditions, they may have to be replaced
Exhaust system: Visually check the exhaust
items with “*” is found in the “8. Do-it- more frequently.
pipes, muffler, and hangers for proper attach-
yourself” section. Spark plugs*: Replace with new plugs having ment, leaks, cracks, chafing, abrasion, dete-
Emission control system the correct heat range. rioration, etc. Under severe driving conditions,
inspection should be performed more fre-
maintenance Intake & exhaust valve clearance: Check the quently.
valve clearance if valve noise increases.
Drive belts*: Check drive belts for wear, fray- Supplemental air bag, and supplemental
ing or cracking and also for proper tension. Chassis and body maintenance side air bag (if so equipped) systems: Main-
Replace the drive belts if found damaged. tenance for the supplemental air bags or
Brake lines & cables: Check the brake lines
Air cleaner filter: Under normal driving con- and hoses (including brake booster vacuum supplemental side air bags should be done by
ditions, the air cleaner filter should be replaced hoses, connections & check valve) and park- an authorized NISSAN dealer.
in accordance with the maintenance schedule. ing brake cables for proper attachment, leaks, Automatic Speed Control Device (ASCD)
However, driving the vehicle in dusty areas cracks, chafing, abrasion, deterioration, etc. vacuum hoses: Check vacuum hose (be-
may cause more rapid clogging of the element. tween ASCD actuator and ASCD pump) for
Brake pads & rotors: Check these and the
Consequently, the element may have to be breakage, cracks or fracture.
other neighboring brake components for wear,
replaced more frequently.
deterioration and leaks. Under severe driving
EVAP vapor lines: Check EVAP vapor lines conditions, they may have to be inspected
and connections for failure or looseness. If more frequently.
leaks are found, replace them.
Manual transaxle oil & automatic transaxle
Fuel lines: Check the fuel hoses, piping and fluid*: Check the fluid level and visually in-
connections for leaks, looseness or deteriora- spect for signs of leakage.
tion. Replace any parts if they are damaged.
Under severe driving conditions, the oil should
Engine coolant*: Drain and flush the cooling be replaced at the specified interval.
system.
Steering gear & linkage, axle & suspension
Engine oil & oil filter*: Under normal driving parts, and front drive shaft boots: Check for
9-10 Maintenance
Z 00.1.17/A33-D/V5.0 X
10 Technical and consumer information
Capacities and recommended fuel/lubricants ......... 10-2 Tire placard ...................................................... 10-12
Fuel recommendation......................................... 10-3 Air conditioner specification label..................... 10-12
Engine oil and oil filter recommendation............ 10-5 Installing front license plate................................... 10-13
Recommended SAE viscosity number............... 10-6 Vehicle loading information ................................... 10-14
Air conditioning system refrigerant and lubricant Terms ............................................................... 10-14
recommendations ............................................... 10-6 Determining vehicle load capacity.................... 10-14
Specifications .......................................................... 10-7 Loading tips ...................................................... 10-15
Engine ................................................................ 10-7 Towing a trailer ..................................................... 10-15
Tires and wheels ................................................ 10-9 Maximum load limits......................................... 10-16
Dimensions and weights .................................... 10-9
Towing safety ................................................... 10-17
When traveling or registering your vehicle in
Uniform tire quality grading ................................... 10-19
another country ..................................................... 10-10
Emission control system warranty ........................ 10-20
Vehicle identification ............................................. 10-10
Reporting safety defects (US only) ....................... 10-20
Vehicle identification number (VIN) plate......... 10-10
Vehicle identification number Readiness for inspection/maintenance (I/M) test
(Chassis number) ............................................. 10-10 (US only) ............................................................... 10-21
Engine serial number ....................................... 10-11 Owner’s Manual/Service Manual order
F.M.V.S.S. certification label ............................ 10-11 information............................................................. 10-22
Emission control information label ................... 10-11 In the event of a collision ...................................... 10-22
Z 00.1.17/A33-D/V5.0 X
CAPACITIES AND
RECOMMENDED
FUEL/LUBRICANTS
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
instructed in the “8. Do-it-yourself” section to determine the proper refill capacity.
Capacity (Approximate)
Recommended
US Imp specifications
Liter
measure measure
Fuel 18-1/2 gal 15-3/8 gal 70 Unleaded gasoline with an octane rating of at least 91 AKI (RON 96)*1
Engine oil*6
Drain and refill
With oil filter change 4-1/4 qt 3-1/2 qt 4.0 I API Certification Mark*2, *3
I API grade SG/SH, Energy Conserving I & II or API grade SJ, Energy
Conserving*2, *3
Without oil filter change 3-7/8 qt 3-1/4 qt 3.7 I ILSAC grade GF-I & GF-II*2, *3
Cooling system
With reservoir 8-1/8 qt 6-3/4 qt 7.7
Genuine NISSAN anti-freeze coolant or equivalent
Reservoir 3/4 qt 5/8 qt 0.7
Manual transmission gear oil — — — API GL-4, Viscosity SAE 75W-90 only
Nissan Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Auto-
Automatic transmission fluid
Refill to the proper oil level according to the instructions matic Transmission Fluid*4
Power steering fluid in the “8. Do-it-yourself” section. Genuine Nissan PSFII or equivalent*8
Brake and clutch fluid Genuine Nissan Brake Fluid*5 or equivalent DOT 3 (US FMVSS No. 116)
Multi-purpose grease — — — NLGI No. 2 (Lithium soap base)
Air conditioning system refrigerant — — — HFC-134a (R-134a)*7
Nissan A/C System Oil
Air conditioning system lubricants — — —
Type S or exact equivalent
*1: For additional information, see later in this paragraph for fuel recommendation.
*2: For additional information, see later in this paragraph for engine oil and oil filter recommendation.
*3: For additional information, see later in this paragraph for recommended SAE viscosity number.
*4: DexronTMIII/MerconTM or equivalent may also be used. Outside the continental United States and Alaska contact a NISSAN dealer for more information regarding
suitable fluids, including recommended brand(s) of DexronTMIII/MerconTM automatic transmission fluid.
*5: Available in mainland US through your NISSAN dealer.
*6: For additional information, see “Engine oil” in the “8. Do-it-yourself” section for changing engine oil.
*7: For additional information, see “Vehicle identification” in this section for air conditioner specification label.
*8: Genuine Nissan PSFII, Canada Nissan Automatic Transmission fluid, DexronTMIII/MerconTM or equivalent ATF may also be used.
10-2 Technical and consumer information
Z 00.1.17/A33-D/V5.0 X
FUEL RECOMMENDATION NISSAN supports efforts towards cleaner air priate cosolvents and corrosion inhibi-
and suggests that you use reformulated gaso- tors. If not properly formulated with ap-
Unleaded premium gasoline with an octane line when available. propriate cosolvents and corrosion
rating of at least 91 AKI (Anti-Knock Index) inhibitors, such methanol blends may
number (Research octane number 96) Gasoline containing oxygenates cause fuel system damage and/or ve-
Some fuel suppliers sell gasoline containing hicle performance problems. At this
If unleaded premium gasoline is not avail-
oxygenates such as ethanol, MTBE and time, sufficient data is not available to
able, unleaded regular gasoline with an
methanol with or without advertising their pres- ensure that all methanol blends are suit-
octane rating of at least 87 AKI (Research
ence. NISSAN does not recommend the use of able for use in NISSAN vehicles.
octane number 91) can be used.
fuels of which the oxygenate content and the If any undesirable driveability problems such
However, for maximum vehicle perfor- fuel compatibility for your NISSAN cannot be as engine stalling and hard hot starting are
mance, the use of unleaded premium gaso- readily determined. If in doubt, ask your ser- experienced after using oxygenate-blend fu-
line is recommended. vice station manager. els, immediately change to a non-oxygenate
If you use oxygenate-blend gasoline, please fuel or a fuel with a low blend of MTBE.
CAUTION take the following precautions as the usage of Take care not to spill gasoline during refu-
such fuels may cause vehicle performance eling. Gasoline containing oxygenates can
Using a fuel other than that specified problems and/or fuel system damage. cause paint damage.
could adversely affect the emission con-
I The fuel should be unleaded and have Aftermarket fuel additives
trol devices and systems, and could an octane rating no lower than that rec-
also affect the warranty coverage. ommended for unleaded gasoline. NISSAN does not recommend the use of any
fuel additives (i.e. fuel injector cleaner, octane
Under no circumstances should a I If an oxygenate-blend, excepting a booster, intake valve deposit removers, etc.)
leaded gasoline be used, since this will methanol blend, is used, it should con- which are sold commercially. Many of these
damage the three-way catalyst. tain no more than 10% oxygenate. additives intended for gum, varnish or deposit
(MTBE may, however, be added up to removal may contain active solvent or similar
15%.) ingredients that can be harmful to the fuel
Reformulated gasoline
I If a methanol blend is used, it should system and engine.
Some fuel suppliers are now producing refor- contain no more than 5% methanol (me-
mulated gasolines. These gasolines are spe- thyl alcohol, wood alcohol). It should
cially designed to reduce vehicle emissions. also contain a suitable amount of appro-
Technical and consumer information 10-3
Z 00.1.17/A33-D/V5.0 X
Octane rating tips are encountered, have your vehicle checked at
a NISSAN dealer or other competent service
In most parts of North America, you should use facility.
unleaded gasoline with an octane rating of at
least 87 or 91 AKI (Anti-Knock Index) number. However, now and then you may notice
However, you may use unleaded gasoline with light spark knock for a short time while
accelerating or driving up hills. This is no
an octane rating as low as 85 AKI number in
cause for concern, because you get the
these high altitude areas [over 4,000 ft (1,219
greatest fuel benefit when there is light
m)] such as: Colorado, Montana, New Mexico, spark knock for a short time under heavy
Utah, Wyoming, northeastern Nevada, south- engine load.
ern Idaho, western South Dakota, western
Nebraska, and that part of Texas which is
directly south of New Mexico.
Using unleaded gasoline with an octane
rating lower than stated above can cause
persistent, heavy spark knock. (Spark
knock is a metallic rapping noise.) If se-
vere, this can lead to engine damage. If you
detect a persistent heavy spark knock even
when using gasoline of the stated octane
rating, or if you hear steady spark knock
while holding a steady speed on level
roads, have your dealer correct the condi-
tion. Failure to correct the condition is
misuse of the vehicle, for which NISSAN is
not responsible.
Incorrect ignition timing will result in knocking,
after-run or overheating. This in turn may
cause excessive fuel consumption or damage
to the engine. If any of the above symptoms
10-4 Technical and consumer information
Z 00.1.17/A33-D/V5.0 X
however, meet the API quality and SAE vis-
cosity ratings specified for your vehicle. Do not
mix mineral based and synthetic type oils in
the engine at the same time.
Oil additives
NISSAN does not recommend the use of oil
additives. The use of an oil additive is not
necessary when the proper oil type is used
and maintenance intervals are followed.
Oil which may contain foreign matter or has
been previously used should not be used.
STI0077
Oil viscosity
The engine oil viscosity or thickness changes
ENGINE OIL AND OIL FILTER front of the container should be used. This type with temperature. Because of this, it is impor-
RECOMMENDATION of oil supersedes the existing API SG or SH tant that the engine oil viscosity be selected
and Energy Conserving I & II categories. based on the temperatures at which the ve-
Selecting the correct oil If you cannot find engine oil with the API hicle will be operated before the next oil
certification mark, use an API grade SG/SH, change. The recommended SAE viscosity
It is essential to choose the correct quality, and
Energy Conserving I & II or API grade SJ, number chart shows the recommended oil
viscosity oil to ensure satisfactory engine life
viscosities for the expected ambient tempera-
and performance. NISSAN recommends the Energy conserving oil. An oil with a single
tures. Choosing an oil viscosity other than that
use of a low friction oil (energy conserving oil) designation SG or SH, or in combination with
recommended could cause serious engine
in order to improve fuel economy and con- other categories (for example, SG/CC or damage.
serve energy. Oils which do not have the SG/CD) may also be used if one with the API
specified quality label should not be used as certification mark cannot be found. An ILSAC Selecting the correct oil filter
they could cause engine damage. grade GF-I & GF-II oil can also be used.
Your new vehicle is equipped with a high-
Only those engine oils with the American Pe- Mineral based or synthetic type oils may be quality genuine NISSAN oil filter. When replac-
troleum Institute (API) certification mark on the used in your NISSAN vehicle. These oils must ing, use the genuine oil filter or its equivalent
Technical and consumer information 10-5
Z 00.1.17/A33-D/V5.0 X
for the reason described in change intervals. RECOMMENDED SAE VISCOSITY AIR CONDITIONING SYSTEM
Change intervals NUMBER REFRIGERANT AND LUBRICANT
RECOMMENDATIONS
The oil and oil filter change intervals for your
engine are based on the use of the specified The air conditioning system in this NISSAN
quality oils and filters. Oil and filter other than vehicle must be charged with the refriger-
the specified quality, or oil and filter change ant HFC-134a (R-134a) and the lubricant,
intervals longer than recommended could re- Nissan A/C System Oil Type S or the exact
duce engine life. Damage to engines caused equivalents.
by improper maintenance or use of incorrect
oil and filter quality and/or viscosity is not
covered by the new NISSAN vehicle warran- CAUTION
ties.
Your engine was filled with a high quality The use of any other refrigerant or lubri-
engine oil when it was built. You do not have to cant will cause severe damage to the air
change the oil before the first recommended conditioning system and will require the
change interval. Oil and filter change intervals replacement of all air conditioner sys-
depend upon how you use your vehicle. Op- tem components.
eration under the following conditions may
require more frequent oil and filter changes.
The refrigerant HFC-134a (R-134a) in your
I repeated short distance driving at cold out- NISSAN vehicle will not harm the earth’s
side temperatures, ozone layer. Although this refrigerant does not
I driving in dusty conditions, affect the earth’s atmosphere, certain govern-
mental regulations require the recovery and
I extensive idling, TI1028-C
recycling of any refrigerant during automotive
I towing a trailer. SAE 5W-30 viscosity oil is preferred for all air conditioning system service. Your NISSAN
ambient temperatures. SAE 10W-30, dealer has the trained technicians and equip-
10W-40 viscosity oil may be used if the ment needed to recover and recycle your air
ambient temperature is above 0°F (−18°C). conditioning system refrigerant.
Z 00.1.17/A33-D/V5.0 X
SPECIFICATIONS
TI1009-A
Z 00.1.17/A33-D/V5.0 X
The spark ignition system of this vehicle
meets all requirements of the Canadian
Interference-Causing Equipment Regula-
tions.
Z 00.1.17/A33-D/V5.0 X
TIRES AND WHEELS DIMENSIONS AND WEIGHTS
Type Size Offset in (mm) Sedan
Z 00.1.17/A33-D/V5.0 X
WHEN TRAVELING OR
REGISTERING YOUR VEHICLE IN VEHICLE IDENTIFICATION
ANOTHER COUNTRY
When planning to travel in another country,
you should first find out if the fuel available is
suitable for your vehicle’s engine.
Using fuel with too low an octane rating may
cause engine damage. All gasoline vehicles
must be operated with unleaded engine gaso-
line. Therefore, avoid taking your vehicle to
areas where appropriate fuel is not available.
When transferring the registration of your
vehicle to another country, state, province
or district, it may be necessary to modify the
vehicle to meet local laws and regulations.
The laws and regulations for motor vehicle
STI0038 STI0187
emission control and safety standards vary
according to the country, state, province or VEHICLE IDENTIFICATION VEHICLE IDENTIFICATION
district; therefore, vehicle specifications may
differ. NUMBER (VIN) PLATE NUMBER (Chassis number)
When any vehicle is to be taken into an- The vehicle identification number plate is at- The number is stamped as shown.
other country, state, province or district tached as shown. This number is the identifi-
and registered, its modifications, transpor- cation for your vehicle and is used in the
tation, and registration are the responsibil- vehicle registration.
ity of the user. NISSAN is not responsible
for any inconvenience that may result.
Z 00.1.17/A33-D/V5.0 X
STI0047 STI0186 STI0188
Z 00.1.17/A33-D/V5.0 X
STI0206 STI0189
Z 00.1.17/A33-D/V5.0 X
INSTALLING FRONT LICENSE
PLATE
Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the vinyl
bag.
I License plate bracket
I J-nut x 2
I Screw x 2
I Screw grommet x 2
1. Temporarily place the license plate bracket
while aligning points q
A of the front bumper
fascia with holes q B in the license plate
bracket.
2. Remove the license plate bracket.
3. Carefully drill two pilot holes q
A using a 0.39
in (10 mm) drill bit at the marked locations.
(Be sure that the drill only goes through
the fascia, or damage to the nut may
occur.)
4. Insert grommets into the hole on the fascia.
5. Insert a flat-blade screwdriver into the
grommet hole to add 90° turn onto the part
qC .
Z 00.1.17/A33-D/V5.0 X
VEHICLE LOADING
INFORMATION
before placing the license plate bracket on I GVWR (Gross Vehicle Weight Rating) -
the fascia. WARNING maximum total weight (load) limit specified
7. Install the license plate bracket with screws. for the vehicle.
I It is extremely dangerous to ride in a I GAWR (Gross Axle Weight Rating) - maxi-
8. Install the license plate with bolts that are
no longer than 0.55 in (14 mm). cargo area inside of a vehicle. In a mum weight (load) limit specified for the
collision, people riding in these areas front or rear axle.
are more likely to be seriously injured
or killed
DETERMINING VEHICLE LOAD
CAPACITY
I Do not allow people to ride in any
area of your vehicle that is not The load capacity of this vehicle is determined
equipped with seats and seat belts. by weight, not by available cargo space. For
example, a luggage rack, bike carrier, cartop
I Be sure everyone in your vehicle is in carrier or similar equipment does not increase
a seat and using a seat belt properly. load carrying capacity of your vehicle.
To determine vehicle load capacity:
TERMS Vehicle weight can be determined by using a
It is important to familiarize yourself with the commercial-grade scale, found at places such
following terms before loading your vehicle: as a truck stop, gravel quarry, grain elevator,
or a scrap metal recycling facility.
I Curb Weight (actual weight of your vehicle)
- vehicle weight including: standard and 1. Determine the curb weight of your vehicle.
optional equipment, fluids, emergency 2. Compare the curb weight amount to the
tools, and spare tire assembly. This weight GVWR specified for your vehicle to deter-
does not include passengers and cargo. mine how much more weight your vehicle
can carry.
I GVW (Gross Vehicle Weight) - curb weight
plus the combined weight of passengers 3. After loading (cargo and passengers), re-
and cargo. weigh your vehicle to determine if either
GVWR or GAWR for your vehicle is ex-
10-14 Technical and consumer information
Z 00.1.17/A33-D/V5.0 X
TOWING A TRAILER
WARNING TI1011M
I Properly secure all cargo to help pre- Your new vehicle was designed to be used
vent it from sliding or shifting. Do not primarily to carry passengers and cargo. Re-
member that towing a trailer will place addi-
place cargo higher than the seat-
tional loads on your vehicle’s engine, drive
backs. In a sudden stop or collision, train, steering, braking and other systems.
unsecured cargo could cause per-
sonal injury. Information on trailer towing ability and the
special equipment required should be ob-
I Do not load your vehicle any heavier tained from your Nissan dealer. He can obtain
than the GVWR or the maximum front a Nissan Trailer Towing Guide for you.
and rear GAWRs. If you do, parts on
your vehicle can break, or it can
change the way your vehicle handles.
This could result in loss of control
Z 00.1.17/A33-D/V5.0 X
MAXIMUM LOAD LIMITS
equipment required may be obtained
Maximum trailer loads from an authorized NISSAN dealer.
Never allow the total trailer load to exceed
1,000 lb (454 kg). The total trailer load equals Tongue load
trailer weight plus its cargo weight. Towing
loads greater than 1,000 lb (454 kg) or using Keep the tongue load between 9 and 11% of
improper towing equipment could adversely the total trailer load. If the tongue load be-
affect vehicle handling, braking and perfor- comes excessive, rearrange cargo to allow for
mance. proper tongue load.
Z 00.1.17/A33-D/V5.0 X
vehicle and the trailer. The chain should be
TOWING LOAD/SPECIFICATION CHART I Do not modify the vehicle exhaust crossed and should be attached to the hitch,
Unit: lb (kg)
system, brake system, etc. to install a not to the vehicle bumper or axle. Be sure to
MAXIMUM trailer hitch. leave enough slack in the chain to permit
1,000 (454)
TOWING LOAD turning corners.
I To reduce the possibility of additional
MAXIMUM
110 (49)
damage if your vehicle is struck from Trailer lights
TONGUE LOAD the rear, where practical, remove the
Trailer lights should comply with federal and/or
hitch and/or receiver when not in use.
TOWING SAFETY After the hitch is removed, seal the
local regulations. When wiring the vehicle for
towing, connect the stop and tail light pickup
Trailer hitch bolt holes to prevent exhaust fumes,
into the vehicle electrical circuit at a point
water or dust from entering the pas- between the sensor and stop light or light
Choose a proper hitch for your vehicle and senger compartment.
trailer. A genuine NISSAN trailer hitch is avail- switch.
able from your NISSAN dealer (Canada only). I Regularly check that all hitch mount- Trailer brakes
Make sure the trailer hitch is securely attached ing bolts are securely mounted.
to the vehicle, to help avoid personal injury or If your trailer is equipped with a braking sys-
property damage due to sway caused by tem, make sure it conforms to federal and/or
crosswinds, rough road surfaces or passing Tire pressures local regulations and that it is properly in-
stalled.
trucks. I When towing a trailer, inflate the vehicle
tires to the recommended cold tire pressure
CAUTION indicated on the tire placard (located on the WARNING
inside of the center console lid).
I Trailer tire condition, size, load rating and Never connect a trailer brake system
I Do not use axle-mounted hitches.
proper inflation pressure should be in ac- directly to the vehicle brake system.
I The hitch should not be attached to cordance with the trailer and tire manufac-
or affect the operation of the impact- turers’ specifications.
absorbing bumper. Pre-towing tips
Safety chain
I Be certain your vehicle maintains a level
Always use a suitable chain between your position when a loaded and/or unloaded
Technical and consumer information 10-17
Z 00.1.17/A33-D/V5.0 X
trailer is hitched. Do not drive the vehicle if slope is not recommended; however, if you at intervals specified in the recommended
it has an abnormal nose-up or nose-down must do so, and if your vehicle is equipped maintenance schedule.
condition; check for improper tongue load, with automatic transmission, first block the
I When making a turn, your trailer wheels will
overload, worn suspension or other pos- wheels and apply the parking brake, and
be closer to the inside of the turn than your
sible causes of either condition. then move the transmission selector lever
vehicle wheels. To compensate for this,
into the P (Park) position. If you move the
I Always secure items in the trailer to prevent make a larger than normal turning radius
selector lever to the P (Park) position be-
load shifts while driving. during the turn.
fore blocking the wheels and applying the
I Be certain your rear view mirrors conform to parking brake, transmission damage could I Crosswinds and rough roads will adversely
all federal, state or local regulations. If not, occur. affect vehicle/trailer handling, possibly
install any mirrors required for towing be- causing vehicle sway. When being passed
I When going down a hill, shift into a lower
fore driving the vehicle. by larger vehicles, be prepared for possible
gear and use the engine braking effect.
changes in crosswinds that could affect
Trailer towing tips When ascending a long grade, downshift
vehicle handling. If swaying does occur,
the transmission to a lower gear and reduce
In order to gain skill and an understanding of firmly grip the steering wheel, steer straight
speed to reduce chances of engine over-
the vehicle’s behavior, you should practice ahead, and immediately (but gradually) re-
loading and/or overheating.
turning, stopping and backing up in an area duce vehicle speed. This combination will
which is free from traffic. Steering stability, and I If the engine coolant rises to an extremely help stabilize the vehicle. Never increase
braking performance will be somewhat differ- high temperature when the air conditioning speed.
ent than under normal driving conditions. system is on, turn off the air conditioner.
Coolant heat can be additionally vented by I Be careful when passing other vehicles.
I Always secure items in the trailer to prevent Passing while towing a trailer requires con-
opening the windows, switching the fan
load shift while driving. siderably more distance than normal pass-
control to high and setting the temperature
I Avoid abrupt starts, acceleration or stops. control to the HOT position. ing. Remember the length of the trailer
must also pass the other vehicle before you
I Avoid sharp turns or lane changes. I Trailer towing requires more fuel than nor- can safely change lanes.
mal circumstances.
I Always drive your vehicle at a moderate I To maintain engine braking efficiency and
speed. I Avoid towing a trailer for the first 500 miles
electrical charging performance, do not use
(800 km).
I Always block the wheels on both vehicle fifth gear (manual transmission) or over-
and trailer when parking. Parking on a I Have your vehicle serviced more often than drive (automatic transmission).
10-18 Technical and consumer information
Z 00.1.17/A33-D/V5.0 X
UNIFORM TIRE QUALITY
GRADING
I Avoid holding the brake pedal down too DOT (Department Of Transportation) Quality and concrete. A tire marked C may have poor
long or too frequently. This could cause the Grades: All passenger car tires must conform traction performance.
brakes to overheat, resulting in reduced to federal safety requirements in addition to
braking efficiency. these grades. WARNING
When towing a trailer, change oil in the Quality grades can be found where applicable
transmission more frequently. on the tire sidewall between tread shoulder The traction grade assigned to your ve-
See “Periodic maintenance schedules” in and maximum section width. For example: hicle tires is based on straight-ahead
the “9. Maintenance” section. Treadwear 200 Traction AA Temperature A braking traction tests, and does not in-
clude acceleration, cornering, hydro-
Treadwear planing, or peak traction characteristics.
Treadwear grade is a comparative rating
based on tire wear rate when tested under Temperature A, B and C
controlled conditions on specified government
test courses. For example, a tire graded 150 Temperature grades are A (the highest), B,
would wear one and a half (1-1/2) times as well and C. They represent a tire’s resistance to
on the government course as a tire graded heat build-up, and its ability to dissipate heat
100. However, relative tire performance de- when tested under controlled conditions on a
specified indoor laboratory test wheel. Sus-
pends on actual driving conditions, and may
tained high temperature can cause tire mate-
vary significantly from the norm due to varia-
rial to degenerate, reducing tire life. Excessive
tions in driving habits, service practices and temperatures can lead to sudden tire failure.
differences in road characteristics and climate. Grade C corresponds to a performance level
Traction AA, A, B and C which all passenger car tires must meet under
the Federal Motor Vehicle Safety Standard No.
The traction grades, from highest to lowest, 109. Grades A and B represent higher levels of
are AA, A, B, and C. Those grades represent performance on laboratory test wheels than
the tire’s ability to stop on wet pavement as the minimum required by law.
measured under controlled conditions on
specified government test surfaces of asphalt
Z 00.1.17/A33-D/V5.0 X
EMISSION CONTROL SYSTEM REPORTING SAFETY DEFECTS
WARRANTY (US only)
Your NISSAN is covered by the following If you believe that your vehicle has a
WARNING emission warranties. defect which could cause a crash or
For US: could cause injury or death, you should
The temperature grade for this tire is immediately inform the National High-
I Emission Defects Warranty way Traffic Safety Administration
established for a tire that is properly
inflated and not overloaded. Excessive I Emissions Performance Warranty (NHTSA) in addition to notifying
speed, underinflation, or excessive NISSAN.
For Canada:
loading, either separately or in combina- If NHTSA receives similar complaints,
tion, can cause heat buildup and pos- Emission Control System Warranty
it may open an investigation, and if it
sible tire failure. Details of these warranties may be found with finds that a safety defect exists in a
other vehicle warranties in your Warranty In- group of vehicles, it may order a recall
formation Booklet (Warranty and Roadside and remedy campaign. However,
Assistance Information (Canada only)) that NHTSA cannot become involved in
comes with your NISSAN. If you did not re-
ceive a Warranty Information Booklet (War-
individual problems between you, your
ranty and Roadside Assistance Information
dealer, or NISSAN.
(Canada only)), or it has become lost, you may To contact NHTSA, you may either call
obtain a replacement by writing to: the Auto Safety Hotline toll-free at
I Nissan North America, Inc. 1-800-424-9393 (or 366-0123 in Wash-
Consumer Affairs Department ington, D.C. area) or write to: NHTSA,
P.O. Box 191 U.S. Department of Transportation,
Gardena. CA. 90248-0191 Washington, D.C. 20590. You can also
I Nissan Canada Inc. obtain other information about motor
5290 Orbitor Drive vehicle safety from the Hotline.
Mississauga, Ontario, You may notify NISSAN by contacting
L4W 4Z5 our Consumer Affairs Department, toll-
free, at 1-800-NISSAN-1.
In Hawaii call (808) 836-0888.
Z 00.1.17/A33-D/V5.0 X
READINESS FOR INSPECTION/
MAINTENANCE (I/M) TEST (US
only)
Due to legal requirements in some states/ points between the C and H (normal oper- 3,000 rpm and maintain it for 5 consecutive
areas, your vehicle may be required to be in ating temperature). minutes.
what is called the ready condition for an 12.Turn the engine off.
2. Accelerate the vehicle to 55 MPH (88
Inspection/Maintenance (I/M) test of the emis-
km/h), then quickly release the accelerator 13.Repeat steps 1 through 8 at least one more
sion control system.
pedal completely and keep it released for at time.
The vehicle is set to the ready condition when least 6 seconds.
it is driven through certain driving patterns. If step 1 through 7 is interrupted, repeat the
3. Quickly depress the accelerator pedal for a preceding step. Any safe driving mode is ac-
Usually, the ready condition can be obtained
moment, then drive the vehicle at a speed ceptable between steps. Do not stop the en-
by ordinary usage of the vehicle.
of 53 to 60 MPH (86 to 96 km/h) for at least gine until step 7 is completed.
If a powertrain system component is repaired 5 minutes.
or the battery is disconnected, the vehicle may
4. Stop the vehicle.
be reset to a not ready condition. Before taking
the I/M test, drive the vehicle through the 5. Accelerate the vehicle to 35 MPH (55 km/h)
following pattern to set the vehicle to the ready and maintain the speed for 20 seconds.
condition. If you cannot or do not want to
6. Repeat steps 4 and 5 at least 3 times.
perform the driving pattern, an NISSAN dealer
can conduct it for you. 7. Accelerate the vehicle to 55 MPH (88 km/h)
and maintain the speed for at least 3 min-
utes.
WARNING
8. Stop the vehicle (shift lever in the “P” or “N”
Always drive the vehicle in a safe and position).
prudent manner according to traffic con- 9. Rev the engine up between 2,500 and
ditions, and obey all traffic laws. 3,500 rpm and hold it for 3 consecutive
minutes, then release the accelerator pedal
1. Start the engine when the engine coolant completely.
temperature gauge needle points to C. Al- 10.Wait 5 second at idle.
low the engine to idle until the gauge needle
11.Rev the engine up between 2,000 and
Technical and consumer information 10-21
Z 00.1.17/A33-D/V5.0 X
OWNER’S MANUAL/SERVICE
MANUAL ORDER INFORMATION
For current pricing and availability of genuine
NISSAN Owner’s Manuals for the 2000
model year and prior, see an authorized
NISSAN dealer, or contact:
DDS Distribution Services, Ltd.
20770 Westwood Dr.
Strongsville OH 44136
1-800-247-5321
In Canada:
To purchase a copy of a genuine NISSAN
Service Manual or Owner’s Manual please
contact your nearest NISSAN dealer. For the
A genuine NISSAN Service Manual is the best In the USA:
phone number and location of a NISSAN
source of service and repair information for
For current pricing and availability of genuine Dealer in your area call the NISSAN Satisfac-
your vehicle. Filled with wiring diagrams, illus-
NISSAN Service Manuals for the 2000 model tion Center at 1-800-387-0122 and a bilingual
trations and step-by-step diagnostic and ad-
year, contact: NISSAN representative will assist you.
justment procedures, this manual is the same
one used by the factory trained technicians Tweddle Litho Company Also available are Genuine NISSAN Service
working at authorized NISSAN dealerships. 1-800-639-8841 and Owner’s Manuals for older NISSAN mod-
Also available are genuine NISSAN Owner’s www.nissan-techinfo.com els.
Manuals, and genuine NISSAN Service and
Owner’s Manuals for older NISSAN models. For current pricing and availability of genuine IN THE EVENT OF A COLLISION
NISSAN Service Manuals for the 1999 model
year and prior, see an authorized NISSAN Unfortunately, accidents do occur. In this un-
dealer, or contact: likely event, there is some important informa-
DDS Distribution Services, Ltd. tion you should know. Many insurance compa-
20770 Westwood Dr. nies routinely authorize the use of non-
Strongsville OH 44136 genuine collision parts in order to cut costs,
1-800-247-5321 among other reasons.
Z 00.1.17/A33-D/V5.0 X
Insist on the use of Genuine Nissan your vehicle. And some states have enacted
Collision Parts! laws that restrict insurance companies from
authorizing the use of non-genuine collision
If you want your vehicle to be restored using parts during the new vehicle warranty. These
parts made to Nissan’s original exacting speci- laws help protect you, so you can take action
fications — if you want to help it to last and to protect yourself.
hold its resale value, the solution is simple.
Tell your insurance agent and your repair
It’s your right!
shop to only use Genuine Nissan Collision If you should need further information visit us
Parts. Nissan does not warrant non-Nissan at: www.nissandriven.com.
parts, nor does Nissan’s warranty apply to
damage caused by a non-genuine part.
Using Genuine Nissan Parts can help protect
your personal safety, preserve your warranty
protection and maintain the resale value of
your vehicle. And if your vehicle was leased,
using Genuine Nissan Parts may prevent or
limit unnecessary excess wear and tear ex-
penses at the end of your lease.
Nissan designs its hoods with crumple zones
to minimize the risk that the hood will penetrate
the windshield of your vehicle in an accident.
Non-genuine (imitation) parts may not provide
such built in safeguards. Also, non-genuine
parts often show premature wear, rust and
corrosion.
Why should you take a chance?
In over 40 states, the law says you must be
advised if non-genuine parts are used to repair
Technical and consumer information 10-23
Z 00.1.17/A33-D/V5.0 X
MEMO
Z 00.1.17/A33-D/V5.0 X
11 Index
Z 00.1.17/A33-D/V5.0 X
Top tether strap anchor point locations .... 1-36 Engine oil and oil filter recommendation... 10-5
D
With top tether strap.................................. 1-36 Engine oil viscosity.................................... 10-5
Child safety ..................................................... 1-23 Engine serial number .............................. 10-11
Daytime running light system ......................... 2-18
Child safety rear door lock................................ 3-4 Engine specifications................................. 10-7
Chimes ............................................................ 2-11 Defogger switch, Rear window and outside mirror
defogger switch............................................... 2-15 If your engine overheats ........................... 6-10
Circuit breaker, Fusible link ............................ 8-21 Starting the engine ...................................... 5-7
Cleaning exterior and interior .................... 7-2, 7-4 Dimensions and weights................................. 10-9
Door open warning light ................................... 2-8 Exhaust gas (Carbon monoxide) ...................... 5-2
Clock ............................................................... 2-29
Clutch Drive belts ....................................................... 8-15
Clutch pedal .............................................. 8-19 Driving F
Fluid........................................................... 8-12 Cold weather driving ................................. 5-21
Cold weather driving ....................................... 5-21 Driving with automatic transmission............ 5-8 F.M.V.S.S. certification label......................... 10-11
Compact Disc (CD) player (See audio Driving with manual transmission ............. 5-11 Filter, Air cleaner housing filter....................... 8-16
system) ........................................................... 4-22 Precautions when starting and driving ........ 5-2 Flashers (See hazard warning flasher
Compact disc (CD) player operation .............. 4-12 switch) ............................................................. 2-19
Compact spare tire ......................................... 8-33 Flat tire .............................................................. 6-2
E Floor mat cleaning ............................................ 7-4
Console box .................................................... 2-25
Controls Fluid
Economy, Fuel ................................................ 5-16 Automatic transmission fluid (ATF) ........... 8-10
Audio controls............................................ 4-12
Emission control information label................ 10-11 Brake and clutch fluid................................ 8-12
Audio controls (rear).................................. 4-12
Emission control system warranty ................ 10-20 Capacities and recommended fuel/
Audio controls (steering wheel)................. 4-12
Engine lubricants ................................................... 10-2
Heater and air conditioner controls ............. 4-3
Before starting the engine........................... 5-7 Engine coolant............................................. 8-5
Heater and semiautomatic air
Block heater .............................................. 5-22 Engine oil..................................................... 8-7
conditioner ................................................... 4-3
Capacities and recommended fuel/ Power steering fluid................................... 8-11
Coolant
lubricants ................................................... 10-2 Window washer fluid ................................. 8-12
Capacities and recommended fuel/
Changing engine coolant ............................ 8-6 Folding rear seat............................................... 1-6
lubricants ................................................... 10-2
Changing engine oil .................................... 8-8 Front air bag system (See supplemental restraint
Changing engine coolant ............................ 8-6
Changing engine oil filter ............................ 8-9 system) ........................................................... 1-14
Checking engine coolant level .................... 8-5
Checking engine coolant level .................... 8-5 Front manual seat adjustment .......................... 1-2
Corrosion protection ......................................... 7-5
Checking engine oil level ............................ 8-7 Front power seat adjustment ............................ 1-4
Cruise control.................................................. 5-13
Coolant temperature gauge ........................ 2-5 Fuel
Cup holder ...................................................... 2-23
Engine compartment check locations ......... 8-4 Capacities and recommended fuel/
Engine cooling system ................................ 8-5 lubricants ................................................... 10-2
Engine oil..................................................... 8-7 Filler cap.................................................... 3-12
11-2
Z 00.1.17/A33-D/V5.0 X
Filler lid ...................................................... 3-12 Headlight switch ........................................ 2-16
J
Filler lid and cap........................................ 3-12 Heated seats................................................... 2-20
Filler lid opener lever................................. 3-12 Heater
Jump starting .................................................... 6-7
Fuel economy............................................ 5-16 Engine coolant heater ............................... 5-22
Fuel octane rating ..................................... 10-3 Heater and air conditioner controls ............. 4-3
Fuel recommendation................................ 10-3 Heater operation.......................................... 4-3 K
Gauge.......................................................... 2-5 Heater operation, Semiautomatic air
conditioner ........................................................ 4-4 Keyless entry, (See multi-remote control
Fuses .............................................................. 8-20
HomeLink Universal Transceiver.................. 2-32 system) ............................................................. 3-4
Fusible links .................................................... 8-21
Hood, release ................................................... 3-9 Keys .................................................................. 3-2
Horn ................................................................ 2-19
G How to stop alarm, Vehicle security
L
system............................................................. 2-13
Garage door opener, Integrated HomeLink Label, Air conditioner specification label ...... 10-12
Universal Transceiver ..................................... 2-32 I Label, Emission control information label..... 10-11
Gas cap .......................................................... 3-12 Label, F.M.V.S.S. certification label.............. 10-11
Gauge ............................................................... 2-3 Ignition switch ................................................... 5-4 Labels
Engine coolant temperature gauge............. 2-5 Automatic transmission models .................. 5-4 Air bag warning labels............................... 1-19
Fuel gauge .................................................. 2-5 Key positions ............................................... 5-6 Air conditioner specification label................ 4-3
Odometer..................................................... 2-4 Manual transmission models....................... 5-5 Engine serial number .............................. 10-11
Speedometer ............................................... 2-4 Immobilizer system ......................................... 2-13 Vehicle identification number (VIN)......... 10-10
Tachometer ................................................. 2-4 Indicator lights and chimes (See warning/indicator License plate, Installing front license plate... 10-13
General maintenance ................................ 9-2, 9-3 lights and chimes)............................................. 2-9 Light
Glasses case .................................................. 2-23 Inside mirror .................................................... 3-14 Air bag warning light ................................. 1-19
Glove box........................................................ 2-24 Inspection/maintenance (I/M) test................. 10-21 Bulb replacement ...................................... 8-23
Glove box lock ................................................ 2-24 Instrument panel ............................................... 2-2 Headlamps (Bulb replacement)................. 8-24
Integrated HomeLink Universal Headlight switch ........................................ 2-16
Transceiver ..................................................... 2-32 Headlights (Bulb replacement).................. 8-24
H
Interior and cargo light.................................... 2-29 Interior and cargo light .............................. 2-29
Hazard warning flasher switch........................ 2-19 Interior light ..................................................... 2-29 Interior light................................................ 2-29
Head restraints ................................................. 1-7 Interior light replacement ................................ 8-25 Personal light............................................. 2-30
Headlamps, (Bulb replacement) ..................... 8-24 Replacement ............................................. 8-23
Headlights Trunk light.................................................. 2-32
(Bulb replacement) .................................... 8-24 Vanity mirror light ...................................... 2-31
11-3
Z 00.1.17/A33-D/V5.0 X
Warning/indicator lights and chimes .... 2-7, 2-9 Periodic maintenance schedules ...................... 9-5
N
Lights, Exterior and interior light Personal light .................................................. 2-30
replacement .................................................... 8-25 Power
Loading information (See vehicle loading Net, Cargo net ................................................ 2-25
Front seat adjustment ................................. 1-4
information) ................................................... 10-14 New vehicle break-in ...................................... 5-15
Power door lock .......................................... 3-3
Lock Nissan Vehicle immobilizer system ................ 2-12
Power outlet .............................................. 2-21
Door locks ................................................... 3-3 Nissan Vehicle Immobilizer System, Engine
start ................................................................... 5-6 Power steering fluid................................... 8-11
Glove box lock........................................... 2-24
Power steering system.............................. 5-18
Power door lock .......................................... 3-3
Power windows ......................................... 2-26
Trunk lid lock opener lever........................ 3-10 O Pre-tensioner seat belt system ....................... 1-17
Low fuel warning light ....................................... 2-9
Precautions
Odometer .......................................................... 2-4 Braking precautions................................... 5-18
M Oil Cruise control precautions ........................ 5-14
Capacities and recommended fuel/ Maintenance precautions ............................ 8-2
Maintenance lubricants ................................................... 10-2
On child restraints ..................................... 1-28
Battery ....................................................... 8-13 Changing engine oil .................................... 8-8
On seat belt usage.................................... 1-21
Explanation of maintenance items..... 9-3, 9-10 Changing engine oil filter ............................ 8-9
On supplemental restraint system .............. 1-9
General maintenance........................... 9-2, 9-3 Checking engine oil level ............................ 8-7
Precautions when starting and driving ........ 5-2
Inside the vehicle ................................. 9-2, 9-3 Engine oil..................................................... 8-7
Push starting ..................................................... 6-9
Maintenance precautions ............................ 8-2 Engine oil viscosity.................................... 10-5
Outside the vehicle .............................. 9-2, 9-3 Outside mirror ................................................. 3-15
Periodic maintenance schedules ................ 9-5 Outside mirror control ..................................... 3-15 R
Seat belt maintenance .............................. 1-27 Outside mirrors ............................................... 3-15
Overdrive switch ............................................. 5-10 Radio, Car phone or CB radio........................ 4-25
Manual front seat adjustment ........................... 1-2
Overheat, If your vehicle overheats................ 6-10 Readiness for inspection/maintenance (I/M) test
Meters and gauges ........................................... 2-3
(US only) ....................................................... 10-21
Mirror
Rear door lock, Child safety rear door lock...... 3-4
Inside mirror .............................................. 3-14 P Rear power point ............................................ 2-21
Outside mirror............................................ 3-15
Rear window and outside mirror defogger
Outside mirror control................................ 3-15 Parking switch .............................................................. 2-15
Outside mirrors.......................................... 3-15 Brake check............................................... 8-18 Registering your vehicle in another
Multi-remote control system.............................. 3-4 Parking brake check.................................. 5-13 country .......................................................... 10-10
Parking brake operation ............................ 5-13 Remote keyless entry, (See multi-remote control
Parking on hills.......................................... 5-13 system) ............................................................. 3-4
Parking/parking on hills .................................. 5-17 Reporting safety defects (US only)............... 10-20
11-4
Z 00.1.17/A33-D/V5.0 X
Rollover ............................................................. 5-3 Shifting Ignition switch automatic transmission
Automatic transmission ............................... 5-8 models ......................................................... 5-4
Manual transmission ................................. 5-11 Ignition switch manual transmission
S
Shoulder belt height adjustment, For front models ......................................................... 5-5
Safety seats ............................................................... 1-27 Overdrive switch........................................ 5-10
Child seat belts.......................................... 1-23 Side air bag system (See supplemental side air Power door lock switch ............................... 3-4
Reporting safety defects (US only) ......... 10-20 bag system) .................................................... 1-16 Rear window and outside mirror defogger
Towing safety .......................................... 10-17 Spark plugs ..................................................... 8-15 switch......................................................... 2-15
Seat Speedometer .................................................... 2-4 Traction control system cancel switch ...... 2-21
Belt extenders ........................................... 1-27 Starting Turn signal switch ..................................... 2-18
Belt maintenance....................................... 1-28 Before starting the engine........................... 5-7
Belt warning light....................................... 1-21 Jump starting............................................... 6-7 T
Belt warning light and chime....................... 2-8 Precautions when starting and driving ........ 5-2
Seat adjustment Push starting ............................................... 6-9 Tachometer ....................................................... 2-4
Front manual seat adjustment .................... 1-2 Starting the engine ...................................... 5-7 Temperature gauge, Engine coolant temperature
Front power seat adjustment ...................... 1-4 Steering gauge ................................................................ 2-5
Seat belt(s) Power steering fluid................................... 8-11 Theft (Nissan Vehicle Immobilizer System),
Child safety................................................ 1-23 Engine start..................................................... 2-13
Power steering system.............................. 5-18
Infants and small children ......................... 1-23 Three way catalyst............................................ 5-3
Tilting steering wheel ................................ 3-13
Injured persons.......................................... 1-24 Tilting steering wheel ...................................... 3-13
Storage ........................................................... 2-22
Larger children .......................................... 1-24 Tire
Sun shade....................................................... 2-28
Pre-tensioner seat belt system ................. 1-17 Flat tire ........................................................ 6-2
Sun visors ....................................................... 3-14 Uniform tire quality grading ..................... 10-19
Precautions on seat belt usage ................ 1-21
Supplemental air bag warning labels ............. 1-19 Tires
Pregnant women ....................................... 1-24
Seat belt cleaning........................................ 7-5 Supplemental air bag warning light......... 1-19, 2-8 Spare tire................................................... 8-35
Seat belts .................................................. 1-21 Supplemental front air bag system................. 1-14 Tire chains................................................. 8-33
Three-point type with retractor .................. 1-24 Supplemental restraint system ......................... 1-9 Tire placard ............................................. 10-12
Seat(s), Seats ................................................... 1-2 Precautions on supplemental restraint Tire pressure ............................................. 8-30
Seats, Heated seats ....................................... 2-20 system ......................................................... 1-9 Tire rotation ............................................... 8-32
Security system (Nissan Vehicle Immobilizer Supplemental side air bag system ................. 1-16 Type of tires .............................................. 8-30
System), Engine start ..................................... 2-13 Switch Top tether strap child restraints...................... 1-36
Security systems (See theft warning)............. 2-12 Hazard warning flasher switch .................. 2-19 Towing
Servicing air conditioner .......................... 4-3, 4-11 Headlight switch ........................................ 2-16 Tow truck towing ....................................... 6-11
Shift lock release ............................................ 5-10 Ignition switch.............................................. 5-4 Towing a trailer........................................ 10-15
11-5
Z 00.1.17/A33-D/V5.0 X
Towing load/specification chart ............... 10-15 Identification number (VIN) ..................... 10-10
Towing safety .......................................... 10-17 Loading information................................. 10-14
Traction control system .................................. 5-20 Vehicle recovery, (freeing a stuck vehicle)..... 6-12
Traction control system (TCS) cancel Ventilators ......................................................... 4-2
switch .............................................................. 2-21
Trailer towing ................................................ 10-15 W
Transceiver, Integrated HomeLink Universal
Transceiver ..................................................... 2-32 Warning, Hazard warning flasher switch ........ 2-19
Transmission Warning labels, Air bag warning labels .......... 1-19
Automatic transmission fluid (ATF) ........... 8-10 Warning light
Driving with automatic transmission............ 5-8 Air bag warning light .......................... 1-19, 2-8
Driving with manual transmission ............. 5-11 Brake warning light...................................... 2-8
Transmission selector lever lock Door open.................................................... 2-8
release....................................................... 5-10
Low fuel warning light ................................. 2-9
Transmitter (See multi-remote control
Seat belt warning light and chime............... 2-8
system) ............................................................. 3-4
Warning/indicator lights and chimes................. 2-7
Traveling or registering your vehicle in another
country .......................................................... 10-10 Warranty, Emission control system
warranty ........................................................ 10-20
Trunk
Washer switch, Windshield wiper and washer
Access through rear seat ............................ 1-6
switch .............................................................. 2-14
Lid lock opener lever................................. 3-10
Washing ............................................................ 7-2
Light........................................................... 2-32
Waxing .............................................................. 7-2
Turn signal switch ........................................... 2-18
Weights (See dimensions and weights) ......... 10-9
Wheels and tires, Cleaning aluminum alloy
U wheels ............................................................... 7-4
Window washer fluid....................................... 8-12
Underbody cleaning .......................................... 7-3 Window(s)
Uniform tire quality grading........................... 10-19 Cleaning ...................................................... 7-3
Power windows ......................................... 2-26
V Windshield wiper and washer switch.............. 2-14
Wiper
Vanity mirror light............................................ 2-31 Blades........................................................ 8-17
Vehicle Windshield wiper and washer switch ........ 2-14
Dimensions and weights ........................... 10-9
11-6
Z 00.1.17/A33-D/V5.0 X
GAS STATION INFORMATION
Z 00.1.17/A33-D/V5.0 X
Windshield washer fluid 8-12
Seat 1-2
Trunk release 3-10
Key 3-2
STI0205
Z 00.1.17/A33-D/V5.0 X