(a) For applicants from AICTE approved colleges and polytechnics approved by AICTE. No On institutions course fee is charged for participants sponsored by AICTE approved institutions. However, Rs 1000/- Prof./Dr./Mr./Ms.____________________________ caution-money has to be sent by the provisionally Modern Scenario in Welding is an employee of our institute and his/her application is hereby sponsored. The applicant will selected participants, which will be returned only when participant joins the course. Participants Technology be permitted to attend the short-term course from Government departments and industries are For Engineering College Teachers, “Modern Scenario in Welding Technology” at IIT also eligible, provided they meet their T.A. and D. Practicing Engineers and Scientists Guwahati to be held from 16th March to 20th March, A. and pay a course fee of Rs. 2500 and Rs. 5000 2015, if selected. respectively. All payments must be made in the form 16th March – 20th March 2015 of a DD drawn on any Nationalized Bank and in favor of QIP IIT Guwahati, payable at Guwahati. Coordinators Date: Signature of sponsoring authority FINANCIAL ASSISTANCE Limited number of participants from the AICTE recognized institutions will be eligible for III AC to Dr. Pankaj Biswas & Dr.Sachin D. Kore and fro railway fare* via shortest route from the place of work and free lodging during the course Official Seal: Designation period. Only the candidates attending the full course will be eligible for T.A. and D.A. *Tatkal (b) For applicants from industries and reservation charges will not be reimbursed. Government departments BOARDING AND LODGING DD No. Date: Boarding and lodging facilities will be provided for the selected candidates from AICTE approved Bank: institutions in the hostel or guest house (based on availability) of the institute during the course period. Amount:
Signature of the applicant
The duly sponsored application should be mailed
to:
Dr. Pankaj Biswas / Dr. Sachin D. Kore
Assistant Professor IMPORTANT DATES Department of Mechanical Engineering Last date of receipt of duly filled applications: 25th Indian Institute of Technology Guwahati January 2015. Intimation of selection by e-mail: Guwahati – 781039, Assam, India 30th January 2015. Considering postal delay, it is Tel.: 0361-2582675 / 2582652 advised that a scanned copy of duly signed form Fax: 0361-2582699 countersigned by the Head of the Department (for Department of Mechanical Engineering Email: pankaj.biswas@iitg.ernet.in sponsored candidates) be sent by e-mail. Indian Institute of Technology G uwahati sdk@iitg.ernet.in For announcement and updates please visit: Guwahati – 781039 http://www.iitg.ac.in/pankaj.biswas or http://www.iitg.ac.in/sdk Assam, India OBJECTIVE VENUE QIP Short Term Course Welding is an inevitable technology in various The short term course will be arranged in the industries such as automobile, ship building, Conference Hall, IIT Guwahati. aeronautical, home appliances, etc. manufacturing industry over 30% of the expenditure In Modern Scenario in Welding is spent on welding. It is also observed that the most Technology of the failure of structure is caused due to poor welding with defects. Hence it is extremely 16th March – 20th March 2015 important to study and analyze the modern and conventional welding processes. This course will Application Form also cover welding defects and inspection with their remedies to improve the weld quality. This course 1. Name (Block letter): will also highlight safety precautions to be followed in welding. It will give fundamental knowledge of 2. Designation & Pay-scale: physics in various welding processes and will also 3. Organization: highlight the importance and applications of modern welding techniques. The course will enable 4. Date of Birth: participants to learn finite element analysis of ABOUT IIT GUWAHATI 5. Address for communication: welded structures. The campus of IIT Guwahati is spread over 285 COURSE CONTENT hectares of land on the north bank of River Outlines of the broad topics that will be covered Brahmaputra at around 20 km from the Guwahati during the course are as follows: city. With the majestic Brahmaputra on one side, Pin Code: Telephone No.: • Introduction of Welding and with hills and vast open spaces on others, the • Industrial welding drawing and symbols campus provides an ideal setting for advanced Mobile: Fax: • Welding edge preparation learning and research. Guwahati city is gateway to E-mail: • Welding safety beautiful North-Eastern region of the country and linked with all major cities by rail, road and air. The 6. Academic Qualification (Please tick) • Welding principle and power source • Present trend in welding technology scenic panorama of the valley, the remarkable (a) B.Tech. (b) M.Tech. (c) Ph.D. • Welding defects and inspections architecture, the local points of art and culture have made the city to one of the most popular destinations 7. Specialization: • Welding metallurgy in the country. The average temperate in the city 8. Experience (in years) • Fatigue in Welding during the period of the course varies from 20-25oC. • Finite Element Analysis of Welded Structures (a) Teaching (b) Industrial (c) Research • Modern Welding technologies like: o Friction Stir Welding 9. Amount of TA requirement as per o Activated TIG Welding entitlement mentioned in the brochure (only o Magnetic Pulse Welding for AICTE approved colleges) Rs.: o Submerged Arc Welding 10. Gender: (a) Male (b) Female o Plasma Arc assisted friction stir welding o Single and Double sided arc welding Please register me for the course of “Modern SPEAKERS Scenario in Welding Technology” to be held at IIT The faculty members of IIT Guwahati, eminent Guwahati during 16th - 20th March, 2015 speakers invited from premier institutions of India and experts from industries. COURSE MATERIAL Place: Each of the participants will be provided with a set Date: Signature of the applicant of lecture notes in the soft format.