ondrives
n Gears Manufacturing
Gear Tooth Calculator
[Normal module a 6.2000 mm
[Normal pressure angle an 20.0000 °
Helix angle 8 5.0000 °
[Number of teeth z 15
Profile shift coefficient x 0.0000
Normal tooth tolerance DIN 3867 e 25
[Diameter of measurement ball input) Dit 0.0000 mm
[Spanned teeth for measurement (input) k 0
[Gear Reference Profile DIN 867
|Dedendum coefficient he 4.2500
JRoot radius factor op (0.2000
[Addendum coefficient hop 1.0000
Hip alteration Kem 0.0000 mm
[Transverse module me 62237 mm
[Transverse pressure angle ae 20.0703 °
[Base helix angle 4.6978 °
Reference diameter d 93.3552 mm
Hip diameter do 105.7552 mam
Root diameter ay | 7.6354 | 77.7453 | mm
Normal tooth allowance Am | -0.0800 | -0.0400 | mm
INormal tooth thickness at reference diameter | 9.6589 | 9.6989 [mm
INormal tooth thickness at tip diameter son | 3.9901 | 4.0354 [mm
[Generating profile shift coefficient xe | 0.0177 | 0.0089)
[Generating profile shift coefficient at undercut limit Eoin 02318
[Measuring pin / ball diameter Dir 10.8000 mm
[Radial single ball distance Ma | 54.0917 | 54.1350 | mm
[Distance over two balls Max [107.6499 [ 107.7360 [mm
[Distance over two pins Maa | 108.1834 | 108.2699 | mm
Cee eed
INumber of teeth for span measurement k 2
[Base tangent length (Span) wi | 28.6964 | 28.7340 [mm
|Warning: The gear has undercut. Please increase xE to a value larger 0.231772
Ondrives Led, Foxwood Industrial Park, Chesterfield, Derbyshire, S41 SRN, UK
Tel: #44(0) 124645500
sales@ondrives.com wewwondrves.comondrives
n Gears Manufacturing
‘The method and sign convention is as by ISO 21771 using a none topping DIN 867 1.25 / 0.20/ 1.00
reference profile,
Caleulation is valid for a value of 1 normal module and above. Reference diameter 10mm and upto and
including 10000mmn,
‘A negative sign Is used for the number of teeth of an internal gear but all diameters are always positive.
Helix angle is always entered as a positive value, Results are the same for left and right helix.
If diameter of measurement ball (input) and spanned teeth for measurement (input) are left blank, default
values are calculated
Distance aver two pins per DIN 3960,
This calculation is provided free of charge by Ondrives Ltd. The software is tested and no errors are
known, but there is no warranty for the correctness of the results and for availability of the calculation. The
usage is at own risk.
Transverse Gear Profile
Ondrives Led, Foxwood Industrial Park, Chesterfield, Derbyshire, S41 SRN, UK
Tel: #44(0) 124645500
sales@ondrives.com wewwondrves.com