a CATERPILLAR
Machine shown may
Include optional equipment.
fa rpillar Engine
Flywheel power @ 2200 RPM 150 HPARL2 aw
(kilowatts OV) is che International System of Units equivalent of
horsepower)
‘Thenet power at the flywheel of the vehicle engine operating under
SAE standard ambient temperature and barometric conctions,
77° 28" Cand 2061" Hy/\00 KP, using 35 API grovity fuel oit
44¢60° P/13.6°C, and after deductions for fan, air cleaner, meffler,
tuater pump, lubricating ofl pump, facl pump, muffler and alter-
nator ‘No derauing is required up to 100000 3000 m aleieude
Caterpillar -stroke-eycle 3906 turbocharged diesel Engine with six
finders, 4.75°/121 mm bore, 6.0°1152 mm stroke, and 658 cu. in!
105 liters piston displacement.
Direct injection Caterpillar fuel system with individual, adjustment:
free injaction pumps and valves Cam-ground and tapered ali
alloy pistons with three-ring design; both compression rings ride in
iron band cast into piston, Piston undersides are enoled by oil spray.
Stollitefaced valves, valve rotators and valve seat inserts
Steel: backed aluminum alloy procision bearings. High carbon ston!
alloy crankshaft with herdened journals. Pressure lubrication with
Follow filtered ol anol cooler. Dry-type air cleaner with primary
and safety elements, automatic dust ejector and service indicator.
i aa i gl
{ig0 HPI112 kW.
| moldboard.
2évolt direct electric starting system with 95-amp alternator and
‘optional ether starting id
transmission
Caterpillar direct drive power shift. Single lover at operator's
right controls six forward and aix reverse speeds, Foot pedal
provides inching capability for close quarter maneuvering. "Transmie-
Sion lock prevents aceidental gar engagement. Machine won't move
oven if ongine is started with transmis
‘Speeds (at rated RPM):
Forward &
Reverse jst 2nd aid ath sth th
MPH 240 39 Gl Wl 182 258
lem 39° 63992 26D ALO
blade controls.
ull hydraulie conerols provide fast, constant control speed
regardless of engine speed. Lock valves in each imploment
circuit eliminates drift, Operator enero all blading operations with
four lovers — loft blade if, circle drive, eenterahift and right blade
lit Hydraulic systom lets operator use more chan one contrat without
decrease in control response speed.190G
Motor Grader
circle
olled Ring forging, 60.24°/1530 mm diameter. Uniform,
flame-cut teeth, Raised wear surfaces top and bottom pre
‘ont cnc txth from contacting support shoos, Hydraulially diven
‘orm and gear provide full $60" eircle rotation. Optional circle drive
sip clutch,
Blade bearn — width x thiekness
blade range
Cirle cent
Tat
Molaboard sideshitt, mechanical, right
Lat
“Optional hydraulic, right
Taft
1 x 1.26°(178 x 32 mm
Maximum shoulder reach outside of tires
Mechanical sideshift, right 60°/1829 mam
Taft 6'5°71956 mm
Hiydrastie, ight 50711829 mm
tafe 571.1508 mm
‘Maximum blade position, angle, both sides go"
‘Maximum lift above ground 18.25°/464 mam
17.25°/4938 mm
40° forward: 6° rearward
‘Maximum depth of eut
‘Optional hydraulic blade tip
“Por 14/4267 mm blade, add 12°/908 mm right o lot. With main
frame in crab position, add 317/940 mm eight oF lett
‘Midrange bank sloping 2:1 capability requires addition of optional
centershift eylinder extension.
moldboard
‘Wear-resistant, high-carbon steel with box-section reinforce
Length x height x thickness
12° 24° x 889658 x 610 x 22 mm
‘Cutting edge — Caterpillar through-hardened curved DH-2 steel and
132° T8 mmm diameter bolts
Width x thickness 6° x 62°7152 x 16 mm
drawbar
Box-section, 5.5" x 8.5" x 0.5°!140 x 89 x 13. mm A-frame
‘with sit widely spaced shoes to support the cree. All have
vertical and horizontal adjustment. Replaceable bronzealloy wear
Ntrips between circle and drawbar and support shoos and. circle
dliminate crele shoe grease fittings and extend wear lie,
frame
Front frame — flanged box-section structure runs from front
bolster to the articulation joint
‘Top and bottom plates —
width «thickness
Side plates
height x thickness
Minimum weight
Minimum vertical
section moduli
12" -88°V905 x 22-mm
9.75" x 0.977248 x 12 mm
108 Th. i161 kgm
121.9 inches eubed/1997-7 om cubed
frame — two box-seetioned channels integral with final drive
axles
Front — soll steel arched bar provides
Maximum ground clearance
Osellation
ront shes! lean angle
24.6°/625 mm
52° cotal
18° loft wr ight
Rear — full-‘loating, forged heat-treated stl.
tandems
Height x width 18990 «7.91467 x 201 mm
ideal thickness, outer 1148 mm
inner or mm
Drive chain piteh 2°51 mm
‘Wheel axle spacing 60°/1524 mm
steering
Front wheels — full two cylinder hydraulic stesring system
Steering range 50° left right
Frame — hydraulically aetuated stooring
20° lft-or right
Minimum turning radius (outside front tires)
‘7am
‘Using front whoo! steering, frame articulation and optional differen,
‘lal with unlock,
wheels
Interchangeable rims and wheel assemblies, Tuheless tres,
ie 100 ~ 24, 10 PR (@-2) craction type.
WA brakes
(System moots OSHA regulations)
Service — Four-wheel, alractuated, oil dise brakes are completely
sealed and adjustment-free. Low air pressure, below 60 psi] bar!
414 kPa in either circuit of the brake system, is indicated to the
fopecator by viaual Ine light) and avdible (horn) warnings.
Parking — Multiple oil dise Located in transmission ease, manly
actuated, springen gaged, ait disengaged. Push the red lever on the
{transmission control eonsole forward to actuate. This neutralizes the
‘transmission, engages the parking brake and activates the transmis
sion neutral lock te prevent machine movement engine is started
‘with transmission engaged,
Emergency — Dual circuit air system includes am individual circuit
to each tandem for added braking protection. A malfunetion in one
rout still leaves the machine with st least half its original braking
capacity for emergency stops
In the event of total oss of service brakes, the spring-nctusted, now:
modulated parkinglemergency brake can be applied to being the
machine toa stop, even if the alr supply Is interru peed, (Method not
recommended for repeated applications)
[il e
(ow profile ROPS eab is standard in U.S.A.)
ROPS (Rollover Protective Struetures) offered by Caterpillar for this
‘machine meet HOPS eritaria: SAF J396, SAF J1040e and ISO 3471,
‘They also meet FOPS (Falling Object Protective Structure) criteria
SAB J281 and IS0 $449, When properly installed and maintained,
ab with doors and windows closed mets OSHA und MSHA require
‘mens for operator sound exposure limits in ofect atime of manfac
ture when tested according to ANSUSAP J1160 SEPRO.
hydraulics
Closed center, constant prussure system with Caterpillar
variable displacement piston pump powers blade controls,
Wheel Jean, stecring, articulation and attachments. Dual level pump
capacity matches horsepower use to system needs. Hydraulic loek
valves in all implernent circuits prevent undesirable eylinder drift
Output @ 2200 engine RPM and
12150 pei bar/I4824 kPa 9 to 51 gpm. to 198 litersimin
depending’ on system requirementsservice refill capacities
US. Gallons Liters
8 2s
Fuel tank
Radiator 106
Cranicense Ta
Transmission, optional differential
‘nd final drive a 1
Tandem housings leach} 169 6
Hydric system 20 %
‘operating weight (approximate)
Basie operating welght includes lubricants, coslant, full fuel
tank, operator, 12/3688 mmm blade with manual sideshif,
1400 — 24,10 PRIG-21 feaction-type tires and low profile ROPS cab,
Le ka
Weight on fromt whoo 837 3800
Weight on rear wheel aisrs 9740
"Tota weight 29,850 13540
Equipped as above and including V-type acarifie
“ind 12/9658 mm blade with hydraule sideshif
Weight on front wheels 10,680 484d
Weight on rear wheels 21.698 Ost
Total weight 32.975 14685,
Ad weights of additional equipment from Attachment Selection lst
‘0 obtain total equipped operating welght.
attachment selection
(with approximate installed weights)
kg
Air conditioneriheater)pressuriaer 145,
Air dryer 1%
Alternator, 60-amp 5
‘Artculation indicator 1
Blade extensions, 21610 mm, right a lft 1
Blac ite aceumilator 16575
Blades:
Hydraulic sideshife with tip control:
12/9658 mm + 480208
14/4267 mm 56 48
Without tip control
22658 mm 160
14/4257 mm mm
Mechanical sideshift, 144267 mm 104
Blade, lost 25
Cab, ROPS, full eight, sound suppressed 65
1opY, HOPS, includes rear wall with window
Low profile 27
Fall eight 350 =159
dimensions (approximace)
le kg
‘Cutting edges, 8" x 752/208 x 19 mm
"With reversible overlay end bits
12856 mm blade as 61
94287 mm blade ie 4
Without reversible overlay end bits:
123858 mom blade % 48
14067 mm blade no 50
(Cylinder extension, centershitt 0M
Defroster fan, rear : 3 4
Differential, tandem drive train, wilock unlock eon
nd bits, reversible overlay 2) OT
;ngine compartment doors 26319
age, water temperaiare 1 5
Heater, eab, hot water, includes pressurizer % BD
Hydatie arrangements with one or more eddtional hydraulic valves
‘are available for hydraulic blade sideshift and tip: V-type seartier
land rear-mounted ripper-scarifer: and for attachments from other
suppliers, such as snow plows, snow wings and bulldozer
deck, hydraulic 210
Lighting systems:
Cab-mounted direetional signals oF
‘Light bar mounted directional signals om
Cab-mounted headlights 2) 5
Front mounted headlights (2) R
Center motinted fleodlignts (2) 4
‘Rearmounted 7 2
‘Warning beacon amber 4
“Mirror, otsde, right and lef, for eab or canopy 5
‘Musfle, sound suppression 0
Presereener 5 8
Pressurizer 2 6
Pash plate 1010 458
ims, 10°/254 mm, set of six.
for use with 14,00 ~ 24 tines ass
Ripper searfier, inchudes 3 shanks 248s 901
Scarifier, front, Vetype, with 11 teath 2.580 18
Seat, shock absorbing 13050
Spare tire and wheel sz a.
Starting ads:
ther 204
Low temporature 2 8
‘Tachograph drive %
‘Tre inflation lt wo 5
‘ites, set of ax
14,00 ~ 24, 12.PR traction 139
17'50 — 26, 12 PR eretion a
‘Too! it 3
Transmission guard without ripper 12
‘with ripper 1
Vandalism protection: avaiable are an instrument
panel guard and cap looks for hydreulte tank
Fadiator, fuel tank, teansmission gauge
and engine oll 17
Variable horsepower arrangement, 10
Windshield wiper, ear 8