a. Run->Change Security state->Reset MCU Security b. wait 10..15 seconds if not success, cancel process. c. check connection d. start from a 2. Remember MCU security byte value 3. Read, Write,... commands can be executed many times. 4. Set MCU security Run->Change Security state->Set MCU Security
MC9S12XEG128 D-FLASH
The up to 32 Kbytes D-Flash (Data Flash)
is a separate flash block with error correction coding intended for storing NVM data, Emulated EEPROM(EEE). Memory space in the D-Flash memory not required for EEE can be partitioned to provide nonvolatile memory space for applications. D-Flash partition can be from 0 to 32 KBytes. The program automaticaly detect D-Flash partition size. Supported Masks: 0M53J, 1M53J, 2M53J