Professional Documents
Culture Documents
7700R2x2 HD PDF
7700R2x2 HD PDF
The 7700R2x2 series modules are bypass protection routers for high definition The 7700R2x2-HD provides additional MPEG-2 feed redundancy switching. By
1.5 GB/s or standard definition 270Mb/s serial digital video signals. These providing automatic smart switching of the main signal to a back up signal, the
modules have two SD/HD compatible inputs signals (program and back up) 7700R2x2-HD offers protection to digital compressed signals. The user can
that support all popular ST 292-1 video formats as well as 525/625 line SMPTE customize all monitored and switching rules to meet Broadcast, Cable, Satellite
ST 259-1 video formats. These modules also provide three re-clocked primary and IPTV needs.
outputs, and one re-clocked backup output. Based on a programmable set of
input signal monitors, the main program or the back-up input signals can be The 7700R2X2-HD and 7700R2X2-HES occupy one card slot and can be
automatically routed to the primary program outputs to ensure the delivery of a housed in the 1RU 7801FR frame that holds up to four single or two dual slot
valid program output in the case of an input signal fault. Switching can also be modules, the 3RU 7800FR frame that has a 15-slot capacity, the portable 3RU
controlled and monitored using module GPIOs, card edge controls or remotely 350FR frame that has a 7-slot capacity, or a standalone enclosure that holds
using either network control panels (CP-2116E, CP-2232E) or VistaLINK® PRO. a single module.
The program output is bypass relay protected and provides protection on the
program path. If the module is removed from the enclosure or power to the The 7700R2x2-HD Supports:
module is lost, the program path is maintained. HD/SD-SDI and ASI TS Monitoring with Smart Switch Protection
The 7700R2X2-HES incorporates Evertz® proprietary SoftSwitch™ technology The 7700R2x2-HES Supports:
with full audio proc for clean video and “popless” embedded audio switching. HD/SD-SDI Monitoring with Smart Switch Protection and Embedded Clean
Line synchronizers on the video inputs can accommodate differences in timing Switch
of up to ±1/2 a line on the video inputs. The 7700RD2X2-HD provides two
monitoring down-converted outputs.
Rev. 14-1
7700R2x2-HD, 7700R2x2-HES, 7700RD2x2-HD
2x2 HD/SD Modular Bypass Protection Routers
7700R2X2-HD
INPUT
1
HD/SD BYPASS
Input 1 HD/SD
PGM
Eq.
(Program) OUT
Cable
1
Driver
Preview
HD/SD Output PREV
Input 2 HD/SD Cable (Back-up) OUT
Eq. Driver
(Back-up)
BNC can be either Input or Output
INPUT
Genlock 2
2 GPI
VistaLINK®
Control 2 1
Video Status Interface
Router State
GPI Status 2 1
GPI Control GPO
Genlock Alphanumeric Card Edge
(Optional) Status Display
Card Edge
Control
7700RD2X2-HD
INPUT
HD/SD Program 1
Input 1 HD/SD Monitoring
Eq. Downconverter Monitor
(Program) BYPASS
Output
PGM
Cable OUT 1
Driver
Audio & Video
Monitoring
Cable 3 Program PGM
Driver Outputs OUT 2
Genlock Genlock
Cable
1
Driver PREV
GPI
2 OUT
Audio & Video
Monitoring Preview
Cable Output
GPO
Driver 1 INPUT
(Back-up) 2
2
1
PGM
2
VistaLINK®
Video Status Control Interface MONITOR
Router State OUTPUT GENLOCK
GPI Status
GPI Control
PREV
Alphanumeric Card Edge
Status Display
Card Edge
Control
7700R2X2-HES
INPUT
1
HD/SD
HD/SD
Input 1 Eq. BYPASS
(Program) PGM
Cable
Driver
OUT
1
2 Program
Audio & Video Outputs
Monitoring Cable
Driver PGM
Embedded OUT
Intelligain™
TM 2
Clean SoftSwitch
Switch Cable
Driver GLCK/
Program 3 / PGM
Audio & Video OUT3
Genlock
Monitoring
HD/SD Preview
PREV
OUT
Input 2 Intelligain™ Cable
Output
Driver
(Back-up) HD/SD
Eq. (Back-up)
INPUT
BNC can be either Input or Output 2
Genlock
1
2 GPI
VistaLINK® 2 1
Video Status Control
Frame Router State
Interface
Genlock 2 1
GPIO
GPO
Rev. 14-1
7700R2x2-HD, 7700R2x2-HES, 7700RD2x2-HD
2x2 HD/SD Modular Bypass Protection Routers
Specifications
Serial Video Input: Downconverted Serial Video Outputs Input to Output Processing Delay (HD input video on
Standard: Auto-detects standard 1.485Gb/s (7700RD2x2-HD only): 7700RD2x2-HD only):
ST 292-1 (1080i/59.94, 1080i/50, Standard: SMPTE ST 259M-1, 270Mb/s Downconverter Video Delay:
720p/59.94, 720p/50) Number of Outputs: 1 Program 1 preview Approximately 1 to 2 frames
SMPTE ST 260-1, Connector: BNC per IEC 61169-8 Annex A depending on input video format,
SMPTE ST 274, Signal Level: 800mV nominal processing mode
SMPTE ST 296, DC Offset: 0V ±0.5V
SMPTE ST 349-1 (HD or SD carrier) Rise and Fall Time: 750ps nominal Electrical:
270Mb/s SMPTE ST 259-1 Overshoot: < 10% of amplitude Voltage: +12V DC
(525i/59.94 or 625i/50), DVB-ASI Return Loss: > 15dB at 270Mb/s Power:
(7700R2x2-HD only) Jitter: < 0.2 UI 7700R2x2-HD: 10W
Connector: 2 BNC per IEC 61169-8 Annex A 7700R2x2-HES: 10W
Input Equalization: Automatic to 100m @ 1.5Gb/s with Genlock Input: 7700RD2x2-HD: 14W
Belden 1694A or equivalent cable Type: NTSC or PAL Color Black 1V p-p EMI/RFI: Complies with FCC regulations for
Return Loss: > 20dB up to 270MHz HD Tri-level Sync class A devices
> 12dB up to 1.5GHz Connector: BNC per IEC 61169-8 Annex A Complies with EU EMC directive
Termination: High impedance or internal 75Ω
Reclocked Serial Video Router Outputs: (jumper selectable) Physical (number of slots):
Standard: Same as input 350FR, 7700FR-C, 7800FR:
Number of Outputs: 3 Program outputs reclocked, GPIO Control Port: 7700R2x2-HD: 1
(1 output is bypass relay protected) Number of Inputs: 2 7700R2x2-HES: 1
1 preview output Number of Outputs: 2 7700RD2x2-HD: 2
Connector: BNC per IEC 61169-8 Annex A Type: Opto-isolated, active low with
Signal Level: 800mV nominal internal pull-ups to +5 or +12V
DC Offset: 0V ±0.5V (jumper settable)
Rise and Fall Time: Connector: 6-pin removable terminal block
HD: 200ps nominal Signal Level: Closure to ground
SD: 900ps nominal
Overshoot:: < 10% of amplitude
Return Loss: > 20dB up to 270MHz
> 15dB at 1.5Gb/s
Jitter: < 0.16 UI (HD) or < 0.10 UI (SD)
Ordering Information
7700R2x2-HD 2x2 HD/SD Modular Bypass Protection Router CP-2232E Remote Control Panel
7700R2x2-HES 2x2 HD/SD Modular Bypass Protection Router with SoftSwitch™ Rear Plate Suffix
7700RD2x2-HD 2x2 HD/SD Modular Bypass Protection Router with dual HD +3RU 3RU Rear Plate for use with 350FR, 7700FR-C or 7800FR
Downconverter Multiframe
+SA Standalone Enclosure Rear Plate
Ordering Options Rear Plate must be specified at time of order
(Eg. Model +3RU) Enclosures
350FR 3RU Portable Multiframe which holds up to 7 single slot modules
+IG Integrated IntelliGain™ Audio and Loudness Processor 7700FR-C 3RU Multiframe which holds up to 15 single slot modules
(on 7700R2x2-HES only) 7800FR 3RU Multiframe which holds up to 15 single slot modules
7801FR 1RU Multiframe which holds up to 4 single or 2 dual slot modules
+BPRP Bypass relay protection for preview output S7701FR Standalone Enclosure
(In addition to program output, 7700R2X2-HD and
7700R2X2-HES only)
The Complete Solution Provider
Accessories
7700FC VistaLINK® Frame Controller
CP-2116E-H Remote Control Panel
Rev. 14-1