Professional Documents
Culture Documents
Quality Form: Quality Result, Efficiency, Downtime History, No of Defects Etc. Caused by The Existing Design)
Quality Form: Quality Result, Efficiency, Downtime History, No of Defects Etc. Caused by The Existing Design)
Problems Encountered in the Existing Design. (you may present defect history or
quality result, efficiency, downtime history, no of defects etc. caused by the existing design)
Design
In this part present each components and the whole design along with the drawings and
computations design.
Shaft. (provide discussion about the shaft like specifications, used etc.)
Over-all Design.
Present the over-all design of your study
Document Code: DCAVRKMI-F-PS
MANUEL S. ENVERGA UNIVERSITY FOUNDATION
Lucena City Document Title: Project Study
An Autonomous University Page No.: Page 2 of 8
Revision No.: 0
Effectivity Date: August 2017
QUALITY FORM Prepared by: DCAVRKMI
Reviewed by: QMR
Approved by: President
Example:
Double Threaded Rod. It is designed as a power screw with single threaded left hand
and right hand screw to accurately adjust the opening of the guard and convert a rotational
Specification:
Pitch
Core diameter
Lead
a = 3.6 degrees
Where:
The adjustable guard must be adjusted by hand so, to compute the total torque require to
Where:
f = coefficient of friction
W = load (lb)
Document Code: DCAVRKMI-F-PS
MANUEL S. ENVERGA UNIVERSITY FOUNDATION
Lucena City Document Title: Project Study
An Autonomous University Page No.: Page 4 of 8
Revision No.: 0
Effectivity Date: August 2017
QUALITY FORM Prepared by: DCAVRKMI
Reviewed by: QMR
Approved by: President
Complete Design.
Bill of Materials. (Present the list of Material and prices, use table)
Document Code: DCAVRKMI-F-PS
MANUEL S. ENVERGA UNIVERSITY FOUNDATION
Lucena City Document Title: Project Study
An Autonomous University Page No.: Page 5 of 8
Revision No.: 0
Effectivity Date: August 2017
QUALITY FORM Prepared by: DCAVRKMI
Reviewed by: QMR
Approved by: President
Example
Table 4
Bill of Material
Components Complete Specification Unit Quantity Machining Total
Price price
Thickness – 30mm
Thickness- 25mm
Total 3,500
Example
Table 5
Testing Result
Trials Condition Result Remarks Action taken
1st Height of the Failed Inspection of big bottle came up Change the Guard
Guard is good, but during inspection of Height from 60mm
60mm small bottles, the body of the to 15mm.
small container cannot be
visualized because the height of
the Guard is too high for small
containers.
2nd Height of the Failed It is now good during inspection When running big
Guard is of the small bottle, but now, bottle at the line,
15mm during inspection of the big use the bigger
bottle, sometimes the bottle Guard, and when
toppling still occurred. running small
bottle, use smaller
size of guard.
3rd Two types of Successful Running big bottle will use big ---
Guard is size guard, and running small
available, the bottle will be using a smaller
small size guard.
15mm and the
big size 60mm
Document Code: DCAVRKMI-F-PS
MANUEL S. ENVERGA UNIVERSITY FOUNDATION
Lucena City Document Title: Project Study
An Autonomous University Page No.: Page 7 of 8
Revision No.: 0
Effectivity Date: August 2017
QUALITY FORM Prepared by: DCAVRKMI
Reviewed by: QMR
Approved by: President
Table 6
Evaluation Result
A. Functionality
Summary of Findings
Discuss all the result of your findings and present it based on your objectives.
There should have 3 Paragraphs (Design Result, Fabrication Result, Testing and
Evaluation Result)
Conclusion
1.
2.
3.
Recommendations
1.
2.
3.