DIN 29994PTX1 83 MM 2794446 OOLO749 5 mm
UDC 621.882.082.22 : 621.643.414 DEUTSCHE NORM July 1983
Pipe threads
for tubes and fittings
Parallel internal thread and taper external thread
e Thread dimensions
Whitworth-Rohrgewinde fr Gewinderohre und Fittings; zylindrisches ‘Supersedes November 1975 edition
Innengewinde und kegeliges Aussengewinde; Gewindemasse
In keeping with current practice in standards published by the International Organization for Standardization (ISO),
‘2 comma has been used throughout as the decimal marker.
For connection with International Standard ISO 7/1 ~ 1982 published by the International Organization for Stand-
ardization (180), soe Explanatory notes.
Dimensions in mm
1 Field of application
This standard applies to joints between parallel internal threads on valves,
‘external threads,
|f necossary, a suitable jointing medium may be used on the throad to ensure a tight joint.
ittings, threaded flanges, ote. and taper
2.2 Taper external thread (letter symbol R)
(tapor 1: 16)
i
a] p=
BY] 1 = oososo10
13] i1,Doeeszrp
$a) a lotaronoe
ay
4 -the proto of tne para! interna thread conforms to
o
e@ §}] tnscoF oso 2ze Pos
te (gauge plene)
g &
i Aniof tad
2 137 278 P
Designation of an R 1/2 taper external pipe thread:
Pipe thread DIN 2999 — R 1/2
Designation of an Rp 1/2 parallel internal’ pipe thread:
Pipe thread DIN 2999 — Rp 1/2
Continued on pages 2 t0 4
Tints for Gerpan Standards (OR Norman) ‘DIN 2999 Part 1 Engl Price group 5
‘Salas No. 0108;DIN 2999*PTH) 63 MM 2794446 OOL0750 _ mm
Page 2 DIN 2999 Part 1
Table 1. Nominal dimensions
7 2 [3 a 7 a
Nominal Minor
‘Thread size e | Gauge diam- | Pitch
of pipe | !enath eter
External | Internal
‘thread_| thread a P
Rp Vie a0. S561 | 0907
Rp 40 8,566 | 0.907
Rp 60" 17,448 | 1,337
R% | RD% 34 14,950 | 1.337
RA [RDA 82 e631 | 1.814
R% | Rp% 85. 24,117 | 1,814
Ri [Rpt 704 30,281 | 2,309 x
RI” | Rpt” 127 38,052 | 2.300 | 11 | 1.470 | 0517 | 10.1
[RI [Rp1@ [127 44,545 | 2,309 | 11 | 1479 | 0317 | 19.1
a2 | Rp? 15,9 56,656 | 2,309 | 11 | 1.479 | 0,817 | 23.4
R2% | Rp? 75 72,226 | 3.809 | 11 | 1.479 | 0817 | 267
RS [RDS 20.6 “84,926 | 2,00 | 11] 1.470 | 0517 | 20.8
Ra [Rea 00 [25,4 1 | i10,072 |~2,909-| 11 1479"| 0.917 | 358
Re [Rps 125 | 28.6 138,472 | 2,909-| 11 |1.470-| 0.917 | 40.1
Re [Ree 50 [28,6 | 163,630 [162,351 | 160,872 | 2,309 [11 | 1.479 | 0317 | 40,1,
Lengths of thread, permissible deviations, limits of sizes,
Maximum length of useful thread
‘ot less than useful length of thread /,)
Reference plane >|
Parallel intornal thread (gauge plano)
spaced LPDPZ
Reference plane
(gauge plane)
Extonsion
of fength
‘of engagement
by wrenching
|_End of tongost pormittod internal throad
athand ongogement |
4. distance of gauge plane from start of thread ¢ = extension of length of engagement caused by plus
'» mean fitting allowance when using tool deviation of internal thread
=,Imporfect thread at tip of thread, due to the
deviation of the somifinished product
4) An Internally threaded part shall make allowance for accommodating @ pie thread up to thrgad length fy for 2
at maximum. .
2) With a free run-out, thé length 2 of useful internal thread shall not be less than 80% of fy for @ at minimum.
3) The dimensions in the reference plane (gauge plane) conform to the nominal dimensions given in table 1.»DIN 2999xPTxL 83 MM 2794444 OOL0751 3 mm
DIN 2099 Part 1 Page 3
Table 2. Permissible deviations, limits of sizes and fitting allowance for external thraads
7 z a a 5 Cn a 3
a o a
‘Thread | Permissible deviations Limits of sizes Number oo
size Turns of threads ‘minimum
of thread =| Moximum | Minimum = min
zt 08 ae an 2% 2s Ta 56
= £09 49 a4 2% 25 74 56
zt ea) 7.3 ar 2% 37. a4
#1 £13 77 54 2% a7) [88
=t =18 70.0 ea 2% “50 15,0 1a
zt “E18 113 7. 2% 60 16,8 127
zt 23 | 127 at 2a oo 19.4 46
1 223 15,0 10.4 2% ea 2a | 168
=t £23 15,0 04 | 2a ea 2a 768
=t 223 13,2 13,6 3% 75 26,7 at
z1a | #36 21,0 14,0 4 2.2 30,2 23.2
=a #35 | 241 7.4 4 92 33,8 268
tA £95 289 a “10.4 39,3 32,8
zt 235 321 | 254 5 16 43,6 36,6
rare E86 32.1 26.4 5 116 43.6 36.6
‘Table 3. Permissible deviations for internal threads
7 z 3 7
Permissible deviations ane | .
ivaedsize | efiandstaneay orate | Poi von a
Turns of thread ‘
Bee 0071 = ma],
or oor 214 =
7 Rp 40,104 bi £17
Rew £0,104 1 #17 B
RBA “eons TE #23 :
RP % ~ 0,142, | bi” +23
Rp 0.160 zim [eee
| Rpt £0,180 etm +29
Api 0160 zw 228
Apa £0160 =r mn
Rp2\2 = £0,217 £1 £35
Rp £0,217 | Ewe +3,5
Apa E027 Za 36
Rp& £0217 r £1” £35
Fpé 0.237 EA E85
These permissible deviations are 1/16 of e.