Professional Documents
Culture Documents
Cat55 PDF
Cat55 PDF
UniJet ® System
B UniJet® Nozzle Bodies, Nozzle
Assemblies, Quick UniJet®
System, UniJet® Spray Tips,
Blow-Off Nozzle
General Purpose
C Nozzles
D Air Atomizing
Nozzles Basic Nozzle Installations, Nozzle
Body Assemblies, Spray Set-Ups,
Automatic Air Actuated Nozzles,
Humidification, Accessories
E Spray Guns
Automatic and AutoJet®, GunJet®, Extensions,
Manually Actuated Accessories, Adapters
F Special Purpose
Nozzles Rotary and Stationary Tank Washing
Nozzles, Foam Control, Self-Cleaning,
Tube Cleaning, Hot Melt GlueTips,
DescaleJet®, CasterJet®,
SprayDry®, AirJet®, Adjustable ball
type nozzles, Clip-Eyelet®,
WindJet®, Manifold System,
Moisturizing/coating header,
Flowback Nozzle Lances
G Fluidline
Accessories Split-Eyelet Connectors,
Adjustable Ball Fittings, Valves,
Pressure Regulators, Gauges,
Filters, Strainers, Swivel
Connectors, Quick Couplers
Tank mixing eductor
Introduction
Includes an overview of Spraying Systems Co.,
spray characteristics, engineering discussions, and
nozzle maintenance information.
B UniJet® System
Another “catalog within a catalog” featuring over
400 interchangeable spray tip designs that fit into the
popular UniJet bodies and retainer cap assemblies.
E Spray Guns
A complete listing of all Spraying Systems’ automatic
and manually actuated spray guns.
Appendix
Trademark ownership, Spraying Systems’ worldwide
organization, master index, and technical support
materials.
Complete nozzle or accessory ordering information is
included on virtually every product page. For a complete
product listing by trademark name, see Table of Contents,
Yohka Ichipa, Japan
page 3. For additional product information, contact your
local Spraying Systems’ representative.
Spray Patterns
Hollow Cone The hollow cone spray pattern is
essentially a circular ring of liquid.
This pattern is generally formed by
use of an inlet tangential to a whirl
chamber, or by an internal grooved
vane immediately upstream from
the orifice. The whirling liquid
results in a hollow cone configura-
tion as it leaves the orifice.
INTRODUCTION
inlet pipe connection. In the
deflector design, the deflection
surface diverts the spray pattern
away from the axis of the inlet
pipe connection.
Straight-through elliptical orifice
spray nozzles normally produce
flat spray patterns with tapering
edges. This characteristic is useful
in establishing overlapping patterns
between adjacent sprays on a
multiple-nozzle header. The result-
ing distribution across the entire
sprayed surface can therefore
be uniform.
Flat spray nozzles with non-
tapered or “even” edges are
usually used in cleaning applica-
tions that require uniform impact
across the entire pattern width
without overlapping the sprays.
Engineering Discussions
Key Performance Considerations
8 Important in selecting spray nozzles for specific applications
Capacity
All capacity tabulations in this Nozzle capacity varies with
catalog are based on water. spraying pressure. In general,
INTRODUCTION
Specific Conversion
Weight of Solution
Gravity Factors
7.0 lbs. per gallon .84 1.09
8.0 lbs. per gallon .96 1.02
8.34 lbs. per gallon – WATER 1.00 1.00
9.0 lbs. per gallon 1.08 .96
10.0 lbs. per gallon 1.20 .91
11.0 lbs. per gallon 1.32 .87
12.0 lbs. per gallon 1.44 .83
14.0 lbs. per gallon 1.68 .77
INTRODUCTION
This table lists the theoretical 2" 4" 6" 8" 10" 12" 15" 18" 24" 30" 36" 48"
coverage of spray patterns as
5° 0.2" 0.4" 0.5" 0.7" 0.9" 1.1" 1.3" 1.6" 2.1" 2.6" 3.1" 4.2"
calculated from the included Theoretical 10° 0.4" 0.7" 1.1" 1.4" 1.8" 2.1" 2.6" 3.1" 4.2" 5.2" 6.3" 8.4"
spray angle of the spray and the Coverage 15° 0.5" 1.1" 1.6" 2.1" 2.6" 3.2" 3.9" 4.7" 6.3" 7.9" 9.5" 12.6"
distance from the nozzle orifice. 20° 0.7" 1.4" 2.1" 2.8" 3.5" 4.2" 5.3" 6.4" 8.5" 10.6" 12.7" 16.9"
angle varies with spray distance. 25° 0.9" 1.8" 2.7" 3.5" 4.4" 5.3" 6.6" 8.0" 10.6" 13.3" 15.9" 21.2"
These values are based on the If the spray coverage require- 30° 1.1" 2.1" 3.2" 4.3" 5.4" 6.4" 8.1" 9.7" 12.8" 16.1" 19.3" 25.7"
assumption that the spray angle 35° 1.3" 2.5" 3.8" 5.0" 6.3" 7.6" 9.5" 11.3" 15.5" 18.9" 22.7" 30.3"
ment is critical, write for specific
remains the same throughout the 40° 1.5" 2.9" 4.4" 5.8" 7.3" 8.7" 10.9" 13.1" 17.5" 21.8" 26.2" 34.9"
spray coverage data. Liquids 45° 1.7" 3.3" 5.0" 6.6" 8.3" 9.9" 12.4" 14.9" 19.9" 24.8" 29.8" 39.7"
entire spray distance. In actual more viscous than water form 50° 1.9" 3.7" 5.6" 7.5" 9.3" 11.2" 14.0" 16.8" 22.4" 28.0" 33.6" 44.8"
practice, the tabulated spray 55°
relatively smaller spray angles 2.1" 4.2" 6.3" 8.3" 10.3" 12.5" 15.6" 18.7" 25.0" 31.2" 37.5" 50.0"
angle does not hold for long 60° 2.3" 4.6" 6.9" 9.2" 11.5" 13.8" 17.3" 20.6" 27.7" 34.6" 41.6" 55.4"
(or even a solid stream),
spray distances. Write for data 65° 2.5" 5.1" 7.6" 10.2" 12.7" 15.3" 19.2" 22.9" 30.5" 38.2" 45.8" 61.2"
depending upon viscosity, nozzle 70° 2.8" 5.6" 8.4" 11.2" 14.0" 16.8" 21.0" 25.2" 33.6" 42.0" 50.4" 67.2"
sheets on actual spray coverage. 75°
capacity and spraying pressure. 3.1" 6.1" 9.2" 12.3" 15.3" 18.4" 23.0" 27.6" 36.8" 46.0" 55.2" 73.6"
Tabulated spray angles indicate Liquids with surface tensions 80° 3.4" 6.7" 10.1" 13.4" 16.8" 20.2" 25.2" 30.3" 40.3" 50.4" 60.4" 80.6"
approximate spray coverages lower than water will produce 85° 3.7" 7.3" 11.0" 14.7" 18.3" 22.0" 27.5" 33.0" 44.0" 55.0" 66.0" 88.0"
90° 4.0" 8.0" 12.0" 16.0" 20.0" 24.0" 30.0" 36.0" 48.0" 60.0" 72.0" 96.0"
based on water. In actual relatively wider spray angles than 95° 4.4" 8.7" 13.1" 17.5" 21.8" 26.2" 32.8" 39.3" 52.4" 65.5" 78.6" 105"
spraying, the effective spray those listed for water. 100° 4.8" 9.5" 14.3" 19.1" 23.8" 28.6" 35.8" 43.0" 57.2" 71.6" 85.9" 114"
110° 5.7" 11.4" 17.1" 22.8" 28.5" 34.3" 42.8" 51.4" 68.5" 85.6" 103"
120° 6.9" 13.9" 20.8" 27.7" 34.6" 41.6" 52.0" 62.4" 83.2" 104"
130° 8.6" 17.2" 25.7" 34.3" 42.9" 51.5" 64.4" 77.3" 103"
140° 10.9" 21.9" 32.9" 43.8" 54.8" 65.7" 82.2" 98.6"
150° 14.9" 29.8" 44.7" 59.6" 74.5" 89.5" 112"
160° 22.7" 45.4" 68.0" 90.6" 113"
170° 45.8" 91.6"
Impact Spray
Spray
Percent Impact
Per sq. inch of
Operating Pressure
Pattern
Impact, or the impingement of a Then from the chart on the right Angle Theoretical The values given in the tabulation
Type Total Impact*
spray onto the target surface, can obtain the impact per square sections of this catalog indicate
INTRODUCTION
be expressed in several different inch of the theoretical total impact Flat Fan 15° 30% the most commonly used pres-
ways. The most useful impact and multiply by the theoretical 25° 18% sure ranges for the associated
35° 13%
value with regard to spray nozzle total. The result is the spray 40° 12% spray nozzle or accessory.
performance is the Impact per impact in lbs./sq. in. The greatest 50° 10% Some spray nozzles and
Square Inch. Basically, this value impact in lbs./sq. inch is obtained 65° 7% accessories can perform below
depends on the spray pattern by solid stream nozzles and can 80° 5% or above the pressures shown,
distribution and the spray angle. be calculated by the formula: 1.9 Full Cone 15° 11% while others can be modified at
30° 2.5%
To obtain the Impact per Square x (spraying pressure, psi). 50° 1% our factory or redesigned to
Inch (pounds per square inch) of 65° 0.4% accommodate the requirements
a given nozzle first determine the 80° 0.2% of specific new applications.
theoretical total impact using 100° 0.1%
Hollow Cone 60° 80° 1 to 2% You should contact your local
the formula:.
Spraying Systems Co. repre-
* At 12" (30 cm) distance from the nozzle.
sentative when information on
the performance of spray
Theoretical Total Impact Spraying Water (pound - force) = nozzles or accessories outside
.0526 x (gpm at spraying pressure) x √spraying pressure, psi of the pressure range given in
this catalog is required.
Specific Gravity
Specific gravity is the ratio of A formula that can be used
the mass of a given volume of instead of the chart below is:
liquid to the mass of the same
volume of water. In spraying,
the main effect of the specific Capacity of liquid being sprayed = 1
gravity of a liquid (other than Capacity of water x √ Specific gravity
water) is on the capacity of the
spray nozzle. Since the values
For technical assistance with
in this catalog are based on
specific applications, contact
spraying water, a conversion
your local Spraying Systems Co.
factor can be applied to deter-
representative.
mine the nozzle capacity when
using a liquid other than water.
1.5
1.4
1.3
Key:
Conversion Factor
0.6
0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0
INTRODUCTION
resists change in the shape or 70°F (21°C). Although liquid size; acting, in this respect, like pressures. A higher surface
arrangement of its elements temperature changes do not a membrane under tension. tension reduces the spray angle,
during flow. Liquid viscosity is a affect the spray performance of Any portion of the liquid surface particularly on hollow cone and
primary factor affecting spray a nozzle they often affect exerts a tension upon adjacent flat fan spray nozzles. Low surface
pattern formation and, to a lesser viscosity, surface tension, and portions or upon other objects tensions can allow a nozzle to be
degree, capacity. High viscosity specific gravity which do with which it is in contact. This operated at a lower pressure. See
liquids require a higher minimum influence spray nozzle force is in the plane of the the summary chart below for the
pressure to begin formation of a performance. For the effects of surface and its amount per unit general effects of surface tension
spray pattern and provide narrow- temperature changes on spray of length is surface tension. Its on spray nozzle performance.
er spray angles as compared to nozzle performance see the value for water is about 73 dynes
those of water. The general summary chart below. per cm at 70°F (21°C). The main
effects of a viscosity other than effects of surface tension are on
that of water are shown in the minimum operating pressure,
summary chart below. spray angle and drop size.
Silicon Carbide
accessories in a wide range of spray nozzles and accessories, Boron Carbide INCOLOY (Reaction Bonded)
materials to meet the needs Spraying Systems Co. has Brass INCONEL Silicon Carbide
of all spraying applications. For accumulated much application Bronze KEL-F (Sintered)
Cast Iron KYNAR Stainless Steels
each “standard” nozzle there is a experience dealing with special
Ceramic Lead
selection of “standard” materials requirements involving corrosive, (all grades)
Chrome Carbide LUCITE
which have been determined to hot, and abrasive liquids; Steel
Copper MONEL
STELLITE
meet the usual requirements of suspensions; and corrosive CPVC Naval Brass
Tantalum
the applications most commonly environments. We would be Cupro Nickel Nickel
DELRIN Nylon TEFLON
associated with that type of pleased to discuss your special 317 LMN Stainless Steel
Ductile Iron Polycarbonate
nozzle. Additionally, Spraying application requirements, includ- Titanium
DURANICKEL Polyethylene
Systems Co. nozzles can be ing choices of suitable nozzle DURONZE polypropylene Tungsten Carbide
manufactured from materials materials. The list at right EVERDUR Polyurethane ULTIMET
other than those shown in the tabulates some of the materials FRP PVC VITON
nozzle tabulation sections of from which we have fabricated Graphite REFRAX ZIRCALLOY
this catalog. spray nozzles and accessories. Hard Rubber Reinforced Polyester Zirconium
Plated or coated nozzles can See Appendix for trademark credits.
also be supplied on request.
Dimensions
The catalog tabulations show orifice dimensions as “Nom.” (nominal).
Specific dimensions are available on request.
Spray performance data and nozzle dimensions are also available in
U.S. Units. Write for information.
Table of Equivalents
Volumetric Units—Equivalents Liquid Pressure—Equivalents
Volumetric Cubic Pound Liquid
Unit Fluid US Cubic Cubic Pressure Lb/In2 Ft Atmo- Inch kPa
Centi- of Liter Kg/Cm2 Bar
Ounce Gallon Foot Meter (psi) Water sphere Mercury (kilopascal)
meter Water
Cubic Lb/In2 (psi) • 2.31 0.070 0.068 0.069 2.04 6.895
Centimeter • 0.034 2.2 x10–3 0.001 2.64x10–4 3.53x10–5 1.0x10–6 Ft Water 0.433 • 0.030 0.029 0.030 0.882 2.99
Fluid Ounce 29.4 • 0.065 0.030 7.81x10–3 1.04x10–3 2.96x10–5 Kg/Cm2 14.2 32.8 • 0.968 0.981 29.0 98
Pound of Atmosphere 14.7 33.9 1.03 • 1.01 29.9 101
Water 454 15.4 • 0.454 0.12 0.016 4.54x10–4
Bar 14.5 33.5 1.02 0.987 • 29.5 100
Liter 1000 33.8 2.2 • 0.264 0.035 0.001
Inch
US Gallon 3785 128 8.34 3.785 • 0.134 3.78x10–3 Mercury 0.491 1.13 0.035 0.033 0,034 • 3.4
Cubic Foot 28320 958 62.4 28.3 7.48 • 0.028 kPa
Cubic Meter 1.0 x106 3.38x104 2202 1000 264 35.3 • (kilopascal) 0.145 0.335 0.01 0.009 0.01 0.296 •
INTRODUCTION
for your application. And, however, nozzles require
just like other production daily attention. Most
equipment, nozzles require nozzle applications fall
maintenance: regular between these extremes.
inspection, cleaning, and At the very least, you
even replacement in order should visually check for
to preserve final produc- damage during every
tion quality and to maintain preventive maintenance
production processes on a shutdown. Additional
cost-efficient basis. maintenance scheduling
How often should you depends on application
specifications, the liquid
inspect spray nozzles? used and nozzle material.
The type and frequency of
your maintenance schedule
depends on your particular
application. In some
for your particular application, the flow meter or collecting spray are parallel.
you should check these five in a container and the results
factors on a regular basis: compared to specifications or to
the performance of new nozzles.
Product quality/application
results. Quality control inspec- Spray pressure. Pressure in the
tion could reveal product defects nozzle manifold can be checked
caused by poor spraying perfor- using a properly calibrated
mance such as uneven coating, pressure gauge.
streaking, or structural imperfec- Spray pattern. In many instances
tions from improper product you can visually check for pattern
cooling. Application-specific uniformity. Changes caused by
measurements can also help you orifice damage, clogging or
evaluate spraying performance; caking are usually noticeable.
for example, check the dust However, to detect gradual
content of the air for dust sup- orifice wear you may need
pression; and check the relative special measuring equipment.
humidity for humidity control.
Uniform spray distribution across a header or manifold is demonstrated on a spray collection table. If even one
spray nozzle is defective, the faulty spray pattern will affect the distribution, which can be a serious problem in most applications.
section A
QuickJet
Inlet Pipe
Adjustable
Conn. NPT or
Ball Fitting
BSPT (M)
Body Type
1
⁄4 x QJ 1
⁄4
⁄ x QJ
38 3
⁄8
1⁄2 x QJ 1
⁄2
Material Codes
Split-Eyelet QuickJet bodies Adjustable Ball Fitting Type no material code = Brass
Male & Female threaded
QuickJet bodies readily adapt provide a quick and easy way to QuickJet nozzle bodies provide SS = 303 Stainless Steel
to most manifold and header mount QuickJet spray tips to a adjustable positioning of QuickJet 316SS = 316 Stainless Steel
installations. The bodies are manifold or header. The assem- spray tips within a 50¡ included
COMPLETE ADJUSTABLE
precision-machined from stain- bly consists of QuickJet body angle of adjustment. Locking BALL FITTING
less steel or brass, and can be and seal, clamps, bolts and screws hold the adjustment posi- QUICKJET NOZZLE
produced in other materials gasket. The gasket, made of tion even when jarred or sub- BODY/SEAL
upon request, seal included. Buna-N material, provides a jected to vibration. Seal included. SPRAY
leak-proof seal. Write for Data Write for Data Sheet 23286. 1/4 x QJ-SS + TIP
Sheet 19208.
Pipe Body Material
Size Type Code
Pipe Body Material Pipe Body Material COMPLETE QUICKJET COMPLETE QUICKJET
Size Type Code Size Type Code PROMAX NOZZLE KYNAR NOZZLE
BODY/SEAL BODY/SEAL
SPRAY SPRAY
1/4 QPP- VI + TIP 1/4 QQ - KY + TIP
Pipe Body Seal Pipe Body Material
Size Type Material Size Type Code
Code
Spray Characteristics
NOZZLE BODIES are available NOZZLE BODIES are molded NOZZLE BODIES are made
QUICKJET SYSTEM
in 303 or 316 stainless steel or of ProMax, a chemically- of heat and chemical-resistant
brass. Male or female threads in coupled, engineering grade of KYNAR PVDF thermoplastic. Male
1⁄8), 1⁄4), 3⁄8), and 1⁄2) sizes. polypropylene. Available with threads come in 1⁄8), 1⁄4), and
NPT or BSPT male threads in 3⁄8) sizes.
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
QA and QLA series small Many additional capacities and
capacity Quick WhirlJet spray spray angles are obtained by
tips feature removable caps, interchanging capsÉask for
original design whirlchambers, Data Sheets 3055, 3986, 3987,
and uniform spray distribution 15350 & 15362M for performance
Éplus the convenience of quick- data on other combinations.
connect 1Ú4 turn installation and
QJJ AND QJJL accurate automatic alignment.
MALE BODIES
HOLLOW CONE
PERFORMANCE DATA
QUICK Body CAPACITY SPRAY
Nozzle Orifice
WHIRLJET Inlet (gallons per minute) ANGLE
Inlet Capacity Diam. Diam.
Conn. TIP TYPE Nom.
Size Nom.
NPT or BSPT Inches 3 5 10 15 20 30 40 60 80 100 7 20 80
QA QLA Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
SEAL ⓦ 0.5 ⁄
1 32 ⁄
3 64 .05 .06 .07 .09 .10 .12 .14 .16 34° 50° 69°
Buna-N (standard) ⓦ 1 ⁄
1 16 ⁄
1 16 .10 .12 .14 .17 .20 .24 .28 .31 53° 67°
VITON (optional) ⓦ 2 5⁄64 5⁄64 .20 .25 .28 .35 .40 .48 .56 .63 48° 62° 71°
18
⁄ , 1⁄4, 3⁄8, 1⁄2 ⓦ 3 3⁄32 3⁄32 .21 .30 .37 .42 .52 .60 .73 .85 .95 51° 65° 78°
ⓦ 5 9⁄64 9⁄64 .27 .35 .50 .61 .70 .86 1.0 1.2 1.4 1.6 63° 73° 79°
ⓦ 8 5⁄32 5⁄32 .44 .56 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 61° 69° 73°
ⓦ 10 3⁄16 11⁄64 .55 .71 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 63° 70° 74°
14 ⁄ , 3⁄8, 1⁄2 ⓦ 15 15⁄64 13⁄64 .82 1.1 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 63° 71° 72°
ⓦ 20 9⁄32 1⁄ 4 1.1 1.4 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 63° 70° 74°
ⓦ 25 19⁄64 19⁄64 1.4 1.8 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 63° 70° 74°
ⓦ 30 21⁄64 5⁄16 1.6 2.1 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 63° 70° 74°
38
⁄ , 1⁄2 ⓦ 15-30.1 15⁄64 5⁄16 1.3 1.6 2.3 2.8 3.2 4.0 4.6 5.6 6.5 7.3 40° 50° 54°
ⓦ 25-30.1 19⁄64 5⁄16 1.5 2.0 2.8 3.4 4.0 4.8 5.6 6.9 8.0 8.9 40° 47° 51°
ⓦ 50-50.1 11⁄32 3⁄8 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 40° 47° 50°
ⓦ 50-50.3 11⁄32 3⁄8 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 72° 76° 78°
ⓦ 40 3⁄8 23⁄64 2.2 2.8 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 72° 76° 78°
12⁄ ⓦ 50 3⁄8 7⁄16 2.7 3.5 5.0 6.1 7.1 8.5 10.0 12.3 14.2 15.8 74° 79° 82°
SPRAY TIP ⓦ 60 3⁄8 33⁄64 3.3 4.3 6.0 7.3 8.5 10.4 12.0 14.7 17.0 19.0 77° 82° 86°
(See Chart) Material Material Codes
Q Q no material code = Brass
Q Q SS = 303 Stainless Steel
QUICKJET SYSTEM
(standard connection) (large connection)
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
QA-W and QLA-W series small Additional capacities and spray
capacity Quick WhirlJet spray angles can be obtained by inter-
tips feature a hollow cone spray changing capsÉask for Data
pattern with a ring-shaped Sheets 5412, 5414 and 15356M
impact area and spray angles of on other performance data.
88¡ to 144¡Éplus the conve-
nience of quick-connect.
QJJ AND QJJL
MALE BODIES PERFORMANCE DATA
HOLLOW CONE
QUICK Body CAPACITY SPRAY
Nozzle Orifice
WHIRLJET Inlet (gallons per minute) ANGLE
Inlet Capacity Diam. Diam.
Conn. TIP TYPE Nom.
Size Nom.
NPT or BSPT Inches 5 7 10 15 20 30 40 60 80 10 20 80
QA QLA Inches psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ 1-1W ⁄
1 16 1 16
⁄ .10 .12 .14 .17 .20 .25 .28 110° 117° 111°
ⓦ 1-5W ⁄
1 16 18
⁄ .17 .21 .24 .29 .34 .42 .48 100° 123° 124°
SEAL ⓦ 1-10W 1⁄16 11 64
⁄ .21 .26 .30 .36 .42 .51 .60 140° 144° 139°
ⓦ 1-15W 1⁄16 7⁄32
.24 .29 .34 .42 .48 .59 .68 105° 128° 132°
Buna-N (standard)
ⓦ 2-5W 5⁄64 1⁄8
.29 .34 .42 .49 .60 .68 .84 .89 118° 123° 113°
VITON (optional) ⓦ 2-10W 5⁄64 11⁄64
.35 .41 .51 .59 .72 .82 1.0 1.2 138° 136° 126°
14 ⓦ 5-5W 9⁄64 1⁄8
.42 .50 .61 .71 .86 1.0 1.2 1.4 114° 113° 104°
⁄ , 3⁄8, 1⁄2
ⓦ 5-10W 9⁄64 11⁄64
.46 .54 .65 .80 .92 1.1 1.3 1.6 1.8 130° 130° 119°
ⓦ 5-15W 9⁄64 7⁄32
.52 .64 .77 .94 1.1 1.3 1.5 1.8 2.2 130° 132° 120°
ⓦ 8-10W 5⁄32 11⁄64
.64 .75 .90 1.1 1.3 1.6 1.8 2.2 2.5 129° 122° 103°
ⓦ 10-10W 3⁄16 11⁄64
.71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 120° 108° 95°
ⓦ 8-15W 5⁄32 7⁄32
.78 .92 1.1 1.4 1.6 1.9 2.2 2.7 3.1 129° 122° 107°
ⓦ 10-15W 3⁄16 7⁄32
.86 1.0 1.2 1.5 1.7 2.1 2.4 3.0 3.4 120° 108° 97°
ⓦ 15-15W 15⁄64 7⁄32
1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 101° 95° 88°
ⓦ 15-15W ⁄
15 64 7 32
⁄ 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 116° 106° 95°
ⓦ 15-20W ⁄
15 64 15 64
⁄ 1.2 1.5 1.7 2.1 2.5 3.0 3.5 4.3 4.9 113° 108° 98°
38 ⓦ 20-20W 9⁄32 15 64
⁄ 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 106° 102° 95°
⁄ , 1⁄2
ⓦ 15-30W 15⁄64 5⁄16
1.6 1.8 2.2 2.7 3.1 3.8 4.4 5.4 6.2 116° 110° 102°
ⓦ 25-25W 19⁄64 19⁄64
1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 105° 100° 93°
ⓦ 25-30W 19⁄64 5⁄16
2.0 2.3 2.8 3.4 4.0 4.9 5.6 6.9 7.9 105° 101° 94°
SPRAY TIP 12
⁄ ⓦ 50-50W 3⁄8 7⁄16
3.5 4.2 5.0 6.1 7.1 8.6 10.0 12.3 14.2 110° 102° 93°
(See Chart) Material Material Codes
Q Q no material code = Brass
Q Q SS = 303 Stainless Steel
DIMENSIONS & WEIGHTS
Pipe B
Inlet
STANDARD BODY TYPE COMMON APPLICATIONS Nozzle A Hex C H
L
Weight
Conn. Type Max. Min. Max.
(F) (M) ⓦ Washing gas and air to
NPT or
remove fly ash and other QJ + QA 1 7⁄8) 1) ⁄)
78 15⁄32) 21⁄16) 21⁄4) 5 oz.
BSPT QJ QJL QJJ QJJL QJJ + QA 113⁄16) ⁄)
78 ⁄)
78 15⁄32) 21⁄8) 23⁄16) 4 oz.
products of combustion QJL + QLA 23⁄16) 11⁄8) 13⁄16) 15⁄16) 21⁄2) 29⁄16) 7 oz.
14
⁄ ⓦ ⓦ
ⓦ Gas cooling QJJL + QLA 27⁄32) 1 ⁄8)
1 13⁄16) 15⁄16) 29⁄16) 219⁄32) 7 oz.
38
⁄ ⓦ ⓦ ⓦ ⓦ
1⁄2
ⓦ ⓦ ⓦ ⓦ ⓦ Water cooling
PERFORMANCE DATA
2 5 64
⁄ 5 64
⁄ .14 .17 .20 .28 .35 .40 .49 .57 .63 53° 70° 80°
2-3 5 64
⁄ 3 32
⁄ .17 .20 .24 .34 .42 .48 .59 .68 .76 61° 76° 83°
QJJ 2-5 5⁄64 7 64
⁄ .20 .23 .28 .40 .48 .56 .69 .79 .89 63° 81° 90°
MALE BODY 2-8 5
⁄64 9⁄64 .23 .28 .33 .47 .57 .66 .81 .93 1.0 71° 87° 95°
2-10 5⁄64 11⁄64 .25 .30 .36 .51 .62 .72 .88 1.0 1.1 72° 94° 104°
2-15 5⁄64 13⁄64 .28 .33 .39 .55 .68 .78 .96 1.1 1.2 77° 100° 111°
HOLLOW CONE
2-20 5⁄64 15⁄64 .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 81° 103° 113°
3-2 3⁄32 5⁄64 .18 .22 .26 .37 .45 .52 .64 .74 .82 58° 67° 76°
3 3
⁄32 3⁄32 .21 .23 .30 .43 .52 .60 .73 .85 .95 55° 79° 80°
3-5 3⁄32 7⁄64 .25 .30 .36 .51 .62 .72 .88 1.0 1.1 72° 82° 86°
3-8 3⁄32 9⁄64 .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 73° 88° 92°
3-10 3⁄32 11⁄64 .34 .40 .48 .68 .83 .96 1.2 1.4 1.5 81° 94° 97°
3-15 3⁄32 13⁄64 .39 .46 .55 .78 .95 1.1 1.3 1.6 1.7 83° 93° 100°
3-20 3
⁄32 15⁄64 .44 .52 .62 .88 1.1 1.2 1.5 1.8 2.0 90° 100° 107°
SEAL
5-2 9⁄64 5⁄64 .36 .51 .62 .72 .88 1.0 1.1 61° 67°
Buna-N (standard) .58 .71 .82 1.0 1.2 1.3
5-3 9⁄64 3⁄32 .34 .41 57° 68° 69°
VITON (optional) 5 9⁄64 7⁄64 .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 70° 75° 79°
5-8 9⁄64 9⁄64 .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 80° 78° 82°
14
⁄ , 3⁄8, 1⁄2 5-10 9
⁄64 11⁄64 .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 80° 87° 89°
5-15 9⁄64 13⁄64 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 83° 91° 95°
5-20 9⁄64 15⁄64 .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 88° 98° 102°
8-5 11⁄64 7⁄64 .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 60° 68° 71°
8 11⁄64 9⁄64
.44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 65° 72° 74°
8-10 11
⁄64 11⁄64
.51 .66 .79 .94 1.3 1.6 1.9 2.3 2.7 3.0 73° 81° 81°
8-15 11⁄64 13⁄64
.59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 78° 84° 87°
8-20 11⁄64 15⁄64
.65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 84° 89° 92°
10-5 3⁄16 7⁄64 .54 .65 .92 1.1 1.3 1.6 1.8 2.0 55° 64° 67°
10-8 3⁄16 9⁄64 .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 60° 64° 66°
10 3
⁄16 11⁄64
.55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 70° 76° 75°
10-15 3⁄16 13⁄64
.67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 76° 81° 79°
10-20 3⁄16 15⁄64
.75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 78° 85° 98°
SPRAY TIP 15-5 15⁄64 7⁄64 .76 1.1 1.3 1.5 1.9 2.2 2.4 65° 60°
(See Chart) 15-8 15⁄64 9⁄64 .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 55° 68° 64°
15-10 15⁄64 11⁄64 .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 65° 75° 71°
15 15⁄64 13⁄64
.82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 70° 72° 75°
15-20 15⁄64 15⁄64 .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 78° 80° 82°
QUICKJET SYSTEM
(standard connection) pattern with a ring-shaped
impact area. They are molded of
highly durable polypropylene to
withstand temperatures up to
QJ 160¡F (71¡C)Éplus very strong
FEMALE BODY and corrosion-resistant.
PERFORMANCE DATA
2-5W 5 64
⁄ 18
⁄ .20 .23 .28 .40 .48 .56 .69 .79 .89 126° 135° 131°
2-8W 5 64
⁄ 5 32
⁄ .22 .26 .31 .44 .54 .62 .76 .88 .98 121° 133° 130°
QJJ 2-10W 5⁄64 11 64
⁄ .24 .28 .34 .48 .59 .68 .83 .96 1.1 121° 135° 127°
MALE BODY 2-15W 5⁄64 7⁄32 .27 .32 .38 .54 .66 .76 .93 1.1 1.2 120° 133° 132°
2-20W 5⁄64 15⁄64 .30 .35 .42 .60 .73 .84 1.0 1.2 1.3 111° 132° 135°
HOLLOW CONE
3-5W 3⁄32 1⁄8 .25 .30 .36 .51 .62 .72 .88 1.0 1.1 133° 131° 109°
3-8W 3⁄32 5⁄32 .30 .35 .42 .60 .73 .84 1.0 1.2 1.3 133° 131° 110°
3-10W 3⁄32 11⁄64 .37 .44 .52 .74 .90 1.0 1.3 1.5 1.6 128° 130° 115°
3-15W 3⁄32 7⁄32 .40 .47 .56 .79 .97 1.1 1.4 1.6 1.8 128° 130° 118°
3-20W 3⁄32 15⁄64 .42 .49 .59 .83 1.0 1.2 1.5 1.7 1.9 119° 134° 136°
5-5W 9⁄64 1⁄8 .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 125° 112° 98°
5-8W 9⁄64 5⁄32 .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 125° 112° 97°
5-10W 9⁄64 11⁄64 .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 125° 118° 102°
SEAL 5-15W 9⁄64 7⁄32 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 130° 125° 105°
5-20W 9⁄64 15⁄64 .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 125° 125° 112°
Buna-N (standard) 1
⁄4, 3⁄8, 1⁄2
VITON (optional) 8-5W 11⁄64 1⁄8 .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 119° 102° 99°
8-8W 11⁄64 5⁄32
.44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 112° 100° 87°
8-10W 11⁄64 11⁄64
.50 .64 .76 .91 1.3 1.6 1.8 2.2 2.6 2.9 115° 102° 90°
8-15W 11⁄64 7⁄32
.59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 121° 110° 98°
8-20W 11⁄64 15⁄64
.65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 121° 113° 106°
10-5W 3⁄16 1⁄8 .54 .65 .92 1.1 1.3 1.6 1.8 2.0 115° 98° 85°
10-8W 3⁄16 5⁄32 .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 110° 95° 84°
10-10W 3⁄16 11⁄64
.55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 111° 97° 89°
10-15W 3⁄16 7⁄32
.67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 113° 104° 97°
10-20W 3⁄16 15⁄64
.75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 118° 107° 102°
15-5W 15⁄64 1⁄8 .76 1.1 1.3 1.5 1.9 2.2 2.4 91° 80°
15-8W 15⁄64 5⁄32 .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 102° 93° 80°
15-10W 15⁄64 11⁄64 .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 107° 97° 83°
15-15W 15⁄64 7⁄32
.82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 110° 98° 90°
15-20W 15⁄64 15⁄64 .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 112° 105° 100°
SPRAY TIP Material Code: PP = Polypropylene
(See Chart)
COMMON APPLICATIONS DIMENSIONS & WEIGHTS
ⓦ Water cooling
DIMENSIONS
Nozzle Weight
ⓦ Aerating
Type A B C H L
ⓦ Wetting
Pipe STANDARD BODY TYPE
14
⁄ QJ+QAP-W 111⁄16) ⁄)
78 ⁄)
78 ⁄ )
15 32 21⁄16) 2.1 oz.
Inlet ⓦ Chemical processes 14
⁄ QJJ+QAP-W 1.8 oz.
Conn. (F) (M)
NPT or
3⁄8QJ+QAP-W 13⁄4) ⁄)
78 ⁄)
78 15⁄32) 21⁄8) 2.3 oz.
3⁄8QJJ+QAP-W
BSPT QJ QJJ 2.0 oz.
14
⁄ ⓦ ⓦ
1⁄2QJ+QAP-W 17⁄8) 1) ⁄)
78 15⁄32) 21⁄4) 3.0 oz.
38
⁄ ⓦ ⓦ ORDERING INFORMATION 1⁄2QJJ+QAP-W 111⁄16) 7⁄8) ⁄)
78 15⁄32) 23⁄16) 2.6 oz.
1⁄2
ⓦ ⓦ QUICKJET
COMPLETE NOZZLE
SPRAY TIP
NOZZLE
BODY + QAP - PP - 10 - 10W
Tip Material Capacity
Type Code Size
QUICK SPRAY NOZZLE TIPS
STANDARD SPRAY ANGLE
A
8 QG QLG
Quick FullJet Quick FullJet
spray nozzle tip spray nozzle tip
QUICKJET SYSTEM
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
QG and QLG series Quick These Quick FullJet spray tip
FullJet spray tip assemblies assemblies feature a solid cone-
feature removable caps and shaped spray pattern with a
vanes. When combined with a round impact area. The spray
QuickJet nozzle body, these angles of 43¡ to 106¡ are
tips allow quick-connect 1Ú4 turn produced in a uniform spray of
QJJ AND QJJL installation without the use medium to large sized droplets
MALE BODIES of tools. over a wide range of flow rates
and pressures.
FULL CONE
PERFORMANCE DATA
Nozzle Maxi- CAPACITY
QUICK Orifice SPRAY
Inlet mum
FULLJET (gallons per minute) ANGLE
Conn. Capacity Diam. Free
TIP TYPE Nom. Passage
NPT or Size
Diam.* 5 7 10 20 30 40 60 80 100 150 7 20 80
Inches
BSPT QG QLG Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
SEAL
Buna-N (standard) ⓦ 1 1 32
⁄ .025 .10 .14 .17 .19 .23 .26 .30 .36 58° 53°
VITON (optional) ⓦ 1.5 3 64
⁄ .025 .13 .15 .21 .25 .29 .35 .40 .44 .53 52° 65° 59°
18 ⓦ 2 3⁄64 .040 .14 .17 .20 .28 .34 .38 .46 .53 .59 .70 43° 50° 46°
⁄ , 1⁄4, 3⁄8, 1⁄2
ⓦ 3 1⁄16 .040 .22 .26 .30 .42 .50 .57 .69 .79 .88 1.1 52° 65° 59°
ⓦ 3.5 1⁄16 .050 .25 .30 .35 .48 .58 .67 .81 .92 1.0 1.3 43° 50° 46°
ⓦ 5 5⁄64 .050 .36 .42 .50 .69 .82 .95 1.2 1.3 1.5 1.8 52° 65° 59°
1 ⓦ 6.5 3⁄32 1⁄16
.47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3 45° 50° 46°
⁄4, 3⁄8, 1⁄2
ⓦ 10 7⁄64 1⁄16
.73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6 58° 67° 61°
ⓦ 9.5 7⁄64 3⁄32
.69 .80 .95 1.3 1.6 1.8 2.2 2.5 2.8 3.4 45° 50° 46°
⁄ , 1⁄2
38
ⓦ 15 9⁄64 3⁄32
1.1 1.3 1.5 2.1 2.5 2.9 3.5 4.0 4.4 5.3 64° 67° 61°
ⓦ 22 3⁄16 7⁄64
1.6 1.9 2.2 3.0 3.7 4.2 5.1 5.8 6.4 7.8 87° 90° 82°
ⓦ 16 9⁄64 1⁄8
1.2 1.4 1.6 2.2 2.7 3.1 3.7 4.3 4.7 5.7 48° 50° 46°
1 ⓦ 25 3⁄16 1⁄8
1.8 2.1 2.5 3.5 4.2 4.8 5.8 6.7 7.4 8.9 64° 67° 61°
⁄2
ⓦ 32 13⁄64 9⁄64
2.3 2.7 3.2 4.4 5.3 6.1 7.4 8.5 9.4 11.3 72° 75° 68°
ⓦ 40 1⁄4 9⁄64
2.9 3.2 4.0 5.5 6.6 7.6 9.2 10.6 11.8 14.3 88° 91° 83°
Material Material Codes *Foreign matter with maximum diameter as listed
SPRAY TIP Q Q no material code = Brass can pass through nozzle without clogging.
(See Chart)
Q Q SS = 303 Stainless Steel
QUICKJET SYSTEM
(standard connection) (large connection)
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
The QH and QLH Quick FullJet The spray tips are easily
nozzles produce a full cone spray installed into or removed from
pattern with spray angles from the QuickJet bodies, for speed
43¡ to 90¡ depending on tip capac- and convenience. The model
ity and pressure. These nozzles QLH, with its larger size and
feature a non-removable vane connection, is rated for larger
QJJ AND QJJL that contributes to uniform distrib- 3.5 gpm (13.3 l/min) capacity
MALE BODIES ution across the impact area. applications.
FULL CONE
PERFORMANCE DATA
Nozzle QUICK Maxi- CAPACITY SPRAY
Orifice mum
Inlet FULLJET (gallons per minute) ANGLE
Capacity Diam. Free
Conn. TIP TYPE
Size Nom. Passage
NPT or 5 7 10 20 30 40 60 80 100 150 7 20 80
Inches Diam.*
BSPT QH QLH Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
SEAL
Buna-N (standard)
18
⁄ , 1⁄4, 3⁄8, 1⁄2 ⓦ 3.5 1 16
⁄ .050 .25 .30 .35 .48 .58 .67 .81 .92 1.0 1.3 43° 50° 46°
VITON (optional) 1 ⓦ 6.5 3 32
⁄ 1⁄16
.47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3 45° 50° 46°
⁄4, 3⁄8, 1⁄2
ⓦ 10 7⁄64 1⁄16
.73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6 58° 67° 61°
3 ⓦ 15 9⁄64 3⁄32
1.1 1.3 1.5 2.1 2.5 2.9 3.5 4.0 4.4 5.3 64° 67° 61°
⁄8, 1⁄2
ⓦ 22 11⁄64 7⁄64
1.6 1.9 2.2 3.0 3.7 4.2 5.1 5.8 6.4 7.8 87° 90° 82°
1
⁄2 ⓦ 25 3⁄16 1⁄8
1.8 2.1 2.5 3.5 4.2 4.8 5.8 6.7 7.4 8.9 64° 67° 61°
Material Material Codes *Foreign matter with maximum diameter as listed
Q Q no material code = Brass can pass through nozzle without clogging.
Q Q SS = 303 Stainless Steel
ⓦ Gas scrubbing
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
The QH-W and QLH-W (larger The spray tips are easily installed
body style) Quick FullJet nozzles into or removed from the
produce a full cone spray pattern QuickJet bodies for quick and
with spray angles from 102¡ to effortless changeout. The tips for
120¡ depending on tip capacity both the standard and large
and pressure. These nozzles versions are available in either
feature a non-removable vane brass or stainless steel.
that contributes to uniform distri-
QJJ AND QJJL
bution across the impact area.
MALE BODIES
FULL CONE
PERFORMANCE DATA
Nozzle QUICK Maxi- CAPACITY SPRAY
Inlet Orifice mum
FULLJET (gallons per minute) ANGLE
Conn. Capacity Diam. Free
TIP TYPE
NPT or Size Nom. Passage
5 7 10 20 30 40 60 80 7 20 80
BSPT Inches Diam.*
QH-W QLH-W Inches psi psi psi psi psi psi psi psi psi psi psi
SEAL
Buna-N (standard) ⓦ 2.8W 1 16
⁄ .040 .28 .38 .45 .51 .61 .70 120° 120° 102°
VITON (optional) ⓦ 5.6W 3 32
⁄ .040 .48 .56 .76 .91 1.0 1.2 1.4 120° 120° 102°
18
⁄, ⁄, ⁄, ⁄14 38 12
ⓦ 8W 3 32
⁄ .050 .68 .80 1.1 1.3 1.5 1.8 2.0 120° 120° 103°
ⓦ 10W 7⁄64 .050 .74 .86 1.0 1.4 1.6 1.8 2.2 2.5 112° 120° 103°
ⓦ 12W 1⁄8 .050 .89 1.0 1.2 1.6 1.9 2.2 2.6 3.0 114° 120° 103°
14
⁄ , 3⁄8, 1⁄2 ⓦ 14W 9⁄64 1⁄16
1.0 1.2 1.4 1.9 2.3 2.6 3.1 3.5 114° 120° 103°
3
⁄8, 1⁄2 ⓦ 20W 11⁄64 3⁄32
1.5 1.7 2.0 2.7 3.2 3.7 4.4 5.0 114° 120° 104°
1
⁄2 ⓦ 50W 17⁄64 5⁄32
3.7 4.3 5.0 6.8 8.1 9.2 11.0 12.5 114° 120° 112°
Material Material Codes *Foreign matter with maximum diameter as listed
Q Q no material code = Brass can pass through nozzle without clogging.
Q Q SS = 303 Stainless Steel
QUICKJET SYSTEM
(standard connection) (large connection)
QJ AND QJL
FEMALE BODIES
DESIGN FEATURES
QH-SQ and QLH-SQ Quick The spray nozzle tips feature
FullJet spray tips feature an a solid cone-shaped spray
integral cap and non-removable patternÉand are well-suited for
vane. When combined with a installations requiring complete
QuickJet nozzle body, these coverage of rectangular areas or
tips allow quick-connect 1Ú4 turn spray zones. The spray angles
installation without the use vary from 40¡ to 82¡.
QJJ AND QJJL of tools.
MALE BODIES
FULL CONE
PERFORMANCE DATA
Nozzle QUICK Maxi- CAPACITY SPRAY
Inlet Orifice mum
FULLJET (gallons per minute) ANGLE
Conn. Capacity Diam. Free
TIP TYPE
NPT or Size Nom. Passage
5 7 10 20 30 40 60 80 100 150 7 20 80
BSPT Inches Diam.*
QH QLH Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
SEAL
Buna-N (standard) 1 ⓦ 3.6SQ 1
⁄16 .050 .26 .31 .36 .50 .60 .69 .83 .95 1.1 1.3 40° 52° 47°
⁄8, 1⁄4, 3⁄8, 1⁄2
VITON (optional) ⓦ 6SQ 3
⁄32 .050 .43 .51 .60 .83 1.0 1.1 1.4 1.6 1.8 2.1 60° 66° 60°
ⓦ 10SQ 7
⁄64 1⁄16
.72 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 62° 67° 61°
⁄ , 3⁄8, 1⁄2
14 ⓦ 12SQ 1
⁄8 1⁄16
.86 1.0 1.2 1.7 2.0 2.3 2.8 3.2 3.5 4.3 70° 75° 68°
ⓦ 14.5SQ .154 1
⁄16 1.1 1.2 1.45 2.0 2.4 2.8 3.3 3.8 4.2 5.1 78° 82° 75°
3
⁄8, 1⁄2 ⓦ 18SQ 5
⁄32 3⁄32
1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.3 6.4 71° 75° 68°
1
⁄2 ⓦ 36SQ 1
⁄4 1⁄8
2.6 3.1 3.6 5.0 6.0 6.9 8.3 9.5 10.5 13.0 78° 82° 75°
Material Material Codes *Foreign matter with maximum diameter as listed
Q Q no material code = Brass can pass through nozzle without clogging.
Q Q SS = 303 Stainless Steel
ⓦ Dust control
Pipe STANDARD BODY TYPE ⓦ Fire protection ORDERING INFORMATION
Inlet
Conn. (F) (M) QUICKJET
NPT or COMPLETE NOZZLE
BSPT QJ QJL QJJ QJJL
SPRAY TIP
18
⁄ ⓦ ⓦ
NOZZLE
1⁄4
ⓦ ⓦ
BODY + QH - SS 12SQ
3⁄8
ⓦ ⓦ
1⁄2
ⓦ ⓦ ⓦ ⓦ Tip Material Capacity
Type Code Size
QUICK SPRAY NOZZLE TIPS
NARROW ANGLE (15° AND 30° SERIES)
A
12 QG15 QG30 QLG15 QLG30
Quick FullJet Quick FullJet Quick FullJet Quick FullJet
spray nozzle tip spray nozzle tip spray nozzle tip spray nozzle tip
QUICKJET SYSTEM
QJ AND QJL
FEMALE BODIES
use of tools.
PERFORMANCE DATA
Nozzle QUICK CAPACITY SPRAY
Inlet FULLJET Orifice ANGLE
Capacity (gallons per minute)
Conn. TIP TYPE Diam.
NPT or Size Nom.
10 20 30 40 60 80 100 150 200 300 10 40 100
BSPT QG QLG Inches
SEAL psi psi psi psi psi psi psi psi psi psi psi psi psi
Buna-N (standard) ⓦ 1507 1 16
⁄ .35 .50 .61 .70 .86 .99 1.1 1.4 1.6 1.9 13° 15° 15°
1
VITON (optional) ⁄8, 1⁄4, 3⁄8, 1⁄2
ⓦ 1514 3 32
⁄ .70 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 13° 15° 15°
1
⁄4, 3⁄8, 1⁄2 ⓦ 1530 1⁄8
1.5 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 13° 15° 15°
3
⁄8, 1⁄2 ⓦ 1550 11⁄64
2.5 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 13° 15° 15°
1
⁄2 ⓦ 1590 7⁄32
4.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 20 25 13° 15° 15°
Material Material Codes
Q Q no material code = Brass
Q Q SS = 303 Stainless Steel
QUICKJET SYSTEM
(standard connection) (large connection)
QJ AND QJL
FEMALE BODIES
FULL CONE
PERFORMANCE DATA
Nozzle QUICK Maxi- CAPACITY SPRAY
Orifice mum
Inlet FULLJET (gallons per minute) ANGLE
Conn. Capacity Diam. Free
TIP TYPE
Size Nom. Passage
NPT or 5 7 10 15 20 30 40 60 80 5 10 80
Inches Diam.*
BSPT QG QLG Inches psi psi psi psi psi psi psi psi psi psi psi psi
SEAL
Buna-N (standard) ⓦ 2.8W 1 16
⁄ .040 .28 .33 .38 .45 .51 .61 .70 120° 102°
VITON (optional) 18 ⓦ 4.3W 5 64
⁄ .040 .43 .51 .58 .70 .79 .95 1.1 120° 102°
⁄, ⁄, ⁄, ⁄
14 38 12
ⓦ 5.6W 3 32
⁄ .040 .48 .56 .67 .76 .91 1.0 1.2 1.4 120° 102°
ⓦ 8W 3⁄32 .050 .68 .80 .96 1.1 1.3 1.5 1.8 2.0 120° 103°
ⓦ 10W 7⁄64 .050 .74 .86 1.0 1.2 1.4 1.6 1.8 2.2 2.5 112° 120° 103°
14 ⁄ , 3⁄8, 1⁄2 ⓦ 12W 1⁄8 .050 .89 1.0 1.2 1.4 1.6 1.9 2.2 2.6 3.0 114° 120° 103°
ⓦ 14W 9⁄64 1⁄16
1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 114° 120° 103°
ⓦ 17W 5⁄32 1⁄16
1.3 1.5 1.7 2.0 2.3 2.8 3.1 3.7 4.2 114° 120° 103°
3
⁄8, 1⁄2 ⓦ 20W 11⁄64 3⁄32
1.5 1.7 2.0 2.4 2.7 3.2 3.7 4.4 5.0 114° 120° 104°
ⓦ 24W 3⁄16 3⁄32
1.8 2.1 2.4 2.9 3.3 3.9 4.4 5.3 6.0 114° 120° 104°
ⓦ 27W 13⁄64 7⁄64
2.0 2.3 2.7 3.2 3.7 4.4 5.0 5.9 6.7 114° 120° 106°
ⓦ 30W 7⁄32 7⁄64
2.2 2.6 3.0 3.6 4.1 4.9 5.5 6.6 7.5 114° 120° 108°
ⓦ 35W 15⁄64 1⁄8
2.6 3.0 3.5 4.2 4.8 5.7 6.4 7.7 8.7 114° 120° 108°
⁄
12 ⓦ 40W 1⁄4 1⁄8
3.0 3.4 4.0 4.8 5.4 6.5 7.4 8.8 10.0 114° 120° 108°
ⓦ 45W 1⁄4 9⁄64
3.3 3.9 4.5 5.4 6.1 7.3 8.3 9.9 11.2 114° 120° 110°
ⓦ 50W 17⁄64 5⁄32
3.7 4.3 5.0 6.0 6.8 8.1 9.2 11.0 12.5 114° 120° 112°
Material Material Codes *Foreign matter with maximum diameter as listed
SPRAY TIP Q Q no material code = Brass can pass through nozzle without clogging.
(See Chart) Q Q SS = 303 Stainless Steel
Wide Angle
Spray Tips Standard Spray Tips
3
/8 QPP
NOZZLE BODY
DESIGN FEATURES
Spraying Systems’ ProMax ProMax material is resistant to The gray nozzle bodies are
Quick FullJet nozzles are molded caking and build-up. An optional available with NPT or BSPT
of a glass-reinforced, engineering external O-ring is available for male threads in 1⁄8), 1⁄4) and 3⁄8)
grade of polypropylene that additional protection against sizes. An internal VITON O-ring
combines exceptional durability contaminants that might make provides a positive seal between
with chemical resistance. The tip removal difficult in harsh body and tip.
simple, three-piece assembly environments. Each tip produces a uniform and
features a unique locking design
1
/8 QPP The tip and body assemblies are consistent full cone spray pattern
that makes tip changing quick
NOZZLE BODY designed with a built-in stop that for accurate coverage across the
and easy. When installed the tip assures full engagement of the header.
automatically locks into place. full cone spray tip when installed.
Tips are color-coded by flow rate This eliminates time consuming
for easy identification. manual adjustment.
Internal VITON Spray tip changeout is accom- ProMax Quick FullJet spray tips
O-ring plished in seconds. A simple are available in capacities rang-
90° turn of the tip removes or ing from 0.67 to 2.9 gpm at 40
installs it. This is done by hand, psi (2.6 to 11.2 l/min at 3.0 bar).
without tools.
ⓦ Chemical manufacturing
ⓦ Metal finishing
ⓦ Food processing
ⓦ Cooling
ⓦ Coating
SPRAY TIP
(See Chart)
QUICK SPRAY NOZZLES
ProMax® spray nozzle system (CONT.)
A
DESIGN FEATURES 15
ⓦ Quick connect design makes ⓦ Reinforced polypropylene ⓦ Nozzle body threads are
tip changing fast. No tools construction for strength and available in 1/8", 1/4", or 3/8"
QUICKJET SYSTEM
required. chemical resistance. sizes…NPT or BSPT.
ⓦ Spray tips are color-coded for
capacity. Nozzle bodies are
light gray.
ProMax QuickJet nozzle maximum pressures
ⓦ Internal stop for positive align-
at various temperatures
ment of tip.
bar psi
ⓦ Standard internal VITON
O-ring. 10 150
ⓦ Optional external O-ring
PRESSURE
suggested for applications 7 100 OPERATING
where nozzle becomes coated REGION
3.5 50
with spray material – for easier
tip removal. 0 0
40 60 80 100 120 140 160 180 200 (°F)
4 16 27 38 49 60 71 82 93 (°C)
LIQUID TEMPERATURE
FULL CONE
PERFORMANCE DATA
ProMax Quick FullJet Spray Nozzle Performance – Wide Angle (120° at 10 psi)
Inlet Connection Spray Tip Spray Tip CAPACITY (gallons per minute)
1/8" 1/4" 3/8" Number Color 10 psi 15 psi 20 psi 30 psi 40 psi 60 psi 80 psi
• • • QPH-3.5 Orange .25 .30 .35 .48 .58 .67 .81 .92 1.0 1.3
• • • QPH-5 Green .36 .42 .50 .69 .82 .95 1.2 1.3 1.5 1.8
• • QPH-6.5 Yellow .47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3
• • QPH-10 Blue .73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6
• • QPH-15 Red 1.1 1.3 1.5 2.1 2.5 2.9 3.5 4.0 4.4 5.3
A
16 H-KY
Quick FullJet
spray tip
QUICKJET SYSTEM
QQ
MALE BODY
DESIGN FEATURES
H-KY Quick FullJet spray tips Maximum pressures up to
are made of KYNAR PVDF 125 psi (9 bar) may be attained
thermoplastic to provide the at lower temperatures. A quarter
excellent chemical and heat turn is all it takes to remove a
resistance required in PCB worn tip for fast cleaning or
SEAL production…performing at replacement.
EPDM (standard) pressures up to 75 psi (5 bar) at
VITON (optional)
temperatures up to 160° F (71°C).
FULL CONE
PERFORMANCE DATA
Nozzle CAPACITY SPRAY
Inlet QuickJet Quick Orifice (gallons per minute) ANGLE
Conn. Nozzle FullJet Tip Diam.
NPT or Body Type & Capacity (Inches) 10 20 30 40 60 80 100 7 20 80
BSPT (M) & Material Size
psi psi psi psi psi psi psi psi psi psi
SPRAY TIP 18
⁄ , 1⁄4, 3⁄8 QQ-KY H-KY6 5 64
⁄ .60 .83 .99 1.1 1.4 1.6 1.7 67° 75° 63°
(See Chart) 61° 70° 64°
H-KY8 3 32
⁄ .80 1.1 1.3 1.5 1.8 2.1 2.3
1
⁄4, 3⁄8 QQ-KY 1.0 1.4 1.7 1.9 2.4 2.7 3.0 75° 78° 75°
H-KY10 7⁄64
Pipe Inlet
STANDARD BODY TYPE DIMENSIONS & WEIGHTS ORDERING INFORMATION
Conn. NPT (M)
or BSPT COMPLETE QUICKJET
QQ Nozzle Max. Max. Weight KYNAR NOZZLE
Type Length Hex kg
18
⁄ ⓦ BODY/SEAL
14
⁄ ⓦ 1/8QQ-KY+H-KY 13⁄4) ⁄)
78 .47 oz. SPRAY
3⁄8
ⓦ 1/4QQ-KY+H-KY 13⁄4) ⁄)
78 .5 oz. 1/4 QQ - KY + TIP
3/8QQ-KY+H-KY 13⁄4) ⁄)
78 .54 oz.
Inlet Body Material See
Connection Type Code Chart
Pipe
Size
QUICK SPRAY NOZZLES (IN KYNAR ®)
SIZED FOR STRIPPERS, ETCHERS & DEVELOPERS
A
QSU-KY QSVV-KY 17
Quick VeeJet Quick VeeJet
miniature spray tips miniature spray tips
QUICKJET SYSTEM
QJJS
MALE BODY
DESIGN FEATURES
QSU-KY and QSVV-KY Quick strippers and other applications
SEAL
VeeJet miniature flat spray tips where space is severely limited.
EPDM (standard)
VITON (optional) are made of KYNAR PVDF ther- For that reason QuickJet minia-
moplastic to provide the excellent ture spray nozzles measure under
chemical and heat resistance one inch when fully assembled
required in PCB production. and installed in the spray bar…
These miniature spray tips are plus the convenience of
especially well-suited for automatic spray tip alignment.
FLAT SPRAY
PERFORMANCE DATA
SPRAY TIP
(See Chart) Nozzle CAPACITY SPRAY
Inlet QuickJet Quick VeeJet Orifice (gallons per minute) ANGLE
Conn. Nozzle Tip Type Diam.
NPT or Body Type & Capacity (Inches) 10 20 30 40 60 80 100 20 40 80
BPST (M) & Material Size psi psi psi psi psi psi psi psi psi psi
QSVV-KY11003 .043 .15 .21 .26 .30 .37 .42 .47 99° 110° 120°
QSVV-KY8004 .052 .20 .28 .35 .40 .49 .57 .63 71° 80° 86°
QSVV-KY8006 .062 .30 .42 .52 .60 .73 .85 .95 72° 80° 85°
18 QSVV-KY8008 .072 .40 .56 .69 .80 .98 1.1 1.3 72° 80° 84°
⁄ , 1⁄4 QJJS-KY
QSU-KY8010 5⁄64
.50 .71 .86 1.0 1.2 1.4 1.6 73° 80° 84°
QSU-KY8015 3⁄32
.75 1.1 1.3 1.5 1.8 2.1 2.4 74° 80° 83°
QSU-KY8020 7⁄64
1.0 1.4 1.7 2.0 2.5 2.8 3.2 74° 80° 83°
QSU-KY9520 7⁄64
1.0 1.4 1.7 2.0 2.5 2.8 3.2 90° 95° 100°
Material Code: KY = KYNAR
Pipe Inlet
STANDARD BODY TYPE DIMENSIONS & WEIGHTS ORDERING INFORMATION
Conn. NPT (M)
or BSPT COMPLETE QUICKJET
QJJS Nozzle Max. Max. KYNAR NOZZLE
Weight
Type Length Hex
18
⁄ ⓦ BODY/SEAL
14
⁄ ⓦ SPRAY
1/8QJJS-KY+QS--KY-- 13⁄32) ⁄)
12 .5 oz. 1/4 QJJS - KY + TIP
1/4QJJS-KY+QS--KY-- 15⁄32) ⁄ )
9 16 .5 oz.
Inlet Body Material See
Connection Type Code Chart
Pipe
Size
QUICK SPRAY NOZZLE TIPS
DESIGN FEATURES
Quick VeeJet flat spray tips offer QSVV and QSU series Quick
the advantages of standard VeeJet tips combine high impact
VeeJet nozzles and save time flat spray patterns with small tip
with quick-connect 1⁄4 turn size. QSVV tips offer flow rates
installation and automatic below 1 gpm at 40 psi (3.9 l/min
spray pattern alignment. at 3 bar), while QSU tips provide
flow rates of 1 gpm (3.9 l/min) or
QVV series Quick VeeJet tips
greater at 40 psi (3 bar). They
offer flow rates below 1 gpm at
are ideal for applications where
40 psi (3.9 l/min at 3 bar).
smaller physical size and weight
QU and QLU series tips provide are important.
FLAT SPRAY/SOLID STREAM
SPRAY TIP
(See Chart)
QUICK
SPRAY NOZZLE TIPS
PERFORMANCE DATA
A
MATCHING NOZZLE BODY
Spray QUICK
VEEJET
Equiv.
CAPACITY
(gallons per minute)
SPRAY
ANGLE
19
Angle Capacity Orifice
SIZE WITH SPRAY TIP at SPRAY TIPS
Size Diam.
40 psi 5 10 20 30 40 60 80 100 200 300 20 40 80 200
CAPACITY SIZE QSVV QVV QSU QU QLU Inches psi
QUICKJET SYSTEM
psi psi psi psi psi psi psi psi psi psi psi psi psi
11001 ⓦ .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 94° 110° 121° 124°
TO PROVIDE PROPER SPRAY 110015 ⓦ .031 .05 .07 .11 97° 110° 121° 124°
.13 .15 .18 .21 .24 .34 .41
PERFORMANCE, THE BODY 11002 ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 98° 110° 120° 123°
SIZE SHOULD BE LARGE 11003 ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 99° 110° 120° 123°
11004 ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 100° 110° 119° 122°
ENOUGH TO MATCH THE 110° 11005 ⓦ .057 .18 .25 .35 .43 .50 100° 110° 118° 122°
.61 .71 .79 1.1 1.4
SPRAY TIP CAPACITY. 11006 ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 101° 110° 117° 122°
TABLES BELOW LIST THE 11008 ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 102° 110° 117° 121°
11010 ⓦ 5⁄64 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 103° 110° 117° 119°
MAXIMUM TIP CAPACITY 11015 ⓦ 3⁄32 .53 .75 1.1 1.3 1.5 1.8 2.1 104° 110° 117° 118°
2.4 3.4 4.1
SIZE FOR EACH BODY SIZE. 11020 ⓦ 7⁄64 .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 105° 110° 117° 118°
9501 ⓦ .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 81° 95° 105° 113°
95015 ⓦ .031 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 82° 95° 105° 113°
9502 ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 82° 95° 105° 113°
QUICKJET MINIATURE 9503 ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 83° 95° 104° 111°
NOZZLE BODIES TO BE USED 9504 ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 84° 95° 103° 108°
9505 ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 84° 95° 102° 107°
WITH QSVV AND QSU SPRAY 9506 ⓦ .062 .21 .30 .42 86° 95° 101° 106°
.52 .60 .73 .85 .95 1.3 1.6
NOZZLE TIPS. 9508 ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 87° 95° 100° 105°
9510 ⓦ 5⁄64 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 89° 95° 100° 105°
MAXI- STANDARD 95° 9515 ⓦ 3⁄32 .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 90° 95° 100° 105°
PIPE 9520 ⓦ ⓦ 7⁄64 .71 1.0 1.4 1.7 90° 95° 100° 105°
MUM INLET BODY TYPE 2.0 2.5 2.8 3.2 4.5 5.5
TIP 9530 ⓦ 9⁄64 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 91° 95° 101° 105°
FLAT SPRAY
CONN. (F) (M) 9540 ⓦ 5⁄32 1.4 2.0 2.8 3.5 92° 95° 100° 105°
CAPAC- NPT OR
4.0 4.9 5.7 6.3 8.9 11.0
ITY 9550 ⓦ 11⁄64 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 93° 95° 99° 103°
BSPT — QJJS 9560 ⓦ 3⁄16 2.1 3.0 4.2 5.2 93° 95° 99° 103°
SIZE 6.0 7.3 8.5 9.5 13.4 16.4
9570 ⓦ 13⁄64 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 93° 95° 99° 103°
--08 18
⁄ NA ⓦ 95100 ⓦ 1⁄4 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 93° 95° 99° 102°
95150 ⓦ 19⁄64 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 93° 95° 99° 102°
--20 ⁄
14 NA ⓦ 800050 ⓦ .018 .035 .043 .050 .06 .07 61° 80° 95° 101°
.08 .11 .14
NA = Not Available 800067 ⓦ .021 .03 .05 .06 .067 .08 .09 .11 .15 .18 67° 80° 94° 99°
8001 ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 68° 80° 89° 92°
80015 ⓦ .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 68° 80° 89° 92°
8002 ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 69° 80° 88° 91°
QUICKJET REGULAR NOZZLE 8003 ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 70° 80° 87° 90°
BODIES TO BE USED WITH 8004 ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 71° 80° 86° 89°
8005 ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 71° 80° 86° 89°
QVV AND QU SPRAY 8006 ⓦ ⓦ .062 .21 .30 .42 .52 .60 72° 80° 85° 88°
.73 .85 .95 1.3 1.6
NOZZLE TIPS. 80° 8008 ⓦ ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 72° 80° 84° 87°
8010 ⓦ ⓦ 5⁄64 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 73° 80° 84° 87°
MAXI- STANDARD 8015 ⓦ ⓦ 3⁄32 .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 74° 80° 83° 86°
PIPE ⓦ ⓦ 74°
MUM INLET BODY TYPE 8020 7⁄64 .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 80° 83° 86°
TIP 8030 ⓦ 9⁄64 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 74° 80° 83° 86°
CONN. (F) (M) ⓦ 74°
CAPAC- NPT OR
8040 5⁄32 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 80° 83° 86°
ITY 8050 ⓦ 11⁄64 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 74° 80° 83° 85°
BSPT QJ QJJ ⓦ 75°
SIZE 8060 3⁄16 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 80° 83° 85°
8070 ⓦ 13⁄64 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 75° 80° 83° 86°
--50 1
⁄8 ⓦ ⓦ 80100 ⓦ 1⁄4
3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 75° 80° 83° 86°
80150 ⓦ 19⁄64
5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 73° 80° 84° 86°
14
⁄ ⓦ ⓦ 80200 ⓦ 11⁄32
7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 74° 80° 82° 85°
730023 ⓦ .012 .016 .020 .023 .028 .032 .036 .051 .063 50° 73° 89° 97°
--80 38
⁄ ⓦ ⓦ 730039 ⓦ .016 .020 .028 .034 .039 .048 .055 .062 .087 .11 53° 73° 87° 93°
730077 ⓦ .022 .039 .055 .067 .077 .09 .11 .12 .17 .21 53° 73° 86° 92°
12
⁄ ⓦ ⓦ 730116 ⓦ .028 .04 .06 .08 .10 .116 .14 .16 .18 .26 .32 54° 73° 85° 90°
730154 ⓦ .032 .05 .08 .11 .13 .154 .19 .22 .24 .34 .42 55° 73° 84° 88°
730231 ⓦ .040 .08 .12 .16 .20 .231 .28 .33 .37 .52 .63 56° 73° 83° 87°
73° 730308 ⓦ .045 .11 .15 .22 .27 .308 .38 .44 .49 .69 .84 58° 73° 82° 86°
730385 ⓦ .051 .14 .19 .27 .33 .385 .47 .54 .61 .86 1.1 59° 73° 81° 85°
QUICKJET LARGE NOZZLE 730462 ⓦ .056 .16 .23 .33 .40 .462 .57 .65 .73 1.0 1.3 60° 73° 80° 84°
730616 ⓦ .065 .22 .31 .44 .53 .616 .75 .87 .98 1.4 1.7 63° 73° 79° 83°
BODIES TO BE USED WITH 730770 ⓦ .072 .27 .38 .54 .67 .770 64° 73° 77° 82°
.94 1.1 1.2 1.7 2.1
QLU SPRAY NOZZLE TIPS. 730924 ⓦ .078 .33 .46 .65 .80 .924 1.1 1.3 1.5 2.1 2.5 65° 73° 77° 80°
650017 ⓦ .011 .012 .015 .017 .021 .024 .027 .038 .047 44° 65° 77° 86°
MAXI- PIPE STANDARD 650025 ⓦ .013 .018 .022 .025 .031 .035 .040 .06 45° 65° 77° 84°
.07
MUM INLET BODY TYPE 650033 ⓦ .015 .023 .029 .033 .040 .047 .052 .07 47° 65° 76° 83°
.09
TIP CONN. 650050 ⓦ .018 .035 .043 .050 .060 .07 .08 .11 48° 65° 75° 82°
(F) (M) .14
CAPAC- NPT OR 650067 ⓦ .021 .03 .05 .06 .067 .08 .09 .11 .15 50° 65° 75° 81°
.18
ITY BSPT 6501 ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 51° 65° 74° 80°
QJL QJJL .27
SIZE 65° 65015 ⓦ .031 .07 .11 .13 .15 .18 .21 .24 .34 51° 65° 74° 80°
.41
6502 ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 52° 65° 73° 79°
38
⁄ ⓦ ⓦ
6503 ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 53° 65° 72° 78°
--250 6504 ⓦ .052 .14 .20 .28 .35 .40 53° 65° 72° 76°
.49 .57 .63 .89 1.1
⁄
12 ⓦ ⓦ 6505 ⓦ .057 .18 .25 .35 .43 .50 53° 65° 72° 76°
.61 .71 .79 1.1 1.4
6506 ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 54° 65° 72° 75°
6508 ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 55° 65° 71° 74°
QUICK
SPRAY NOZZLE TIPS
TYPICAL ASSEMBLY
A FOR MINIATURE
QUICK VEEJET
SPRAY NOZZLES
PERFORMANCE DATA
20 Spray QUICK
VEEJET
Equiv.
CAPACITY
(gallons per minute)
SPRAY
ANGLE
Angle Capacity Diam.
at SPRAY TIPS
Size Nom.
40 psi 5 10 20 30 40 60 80 100 200 300 20 40 80 200
Inches
QUICKJET SYSTEM
QSVV QVV QSU QU QLU psi psi psi psi psi psi psi psi psi psi psi psi psi psi
6510 ⓦ 5 64
⁄ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 56° 65° 71° 74°
6515 ⓦ 3 32
⁄ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 56° 65° 70° 73°
6520 ⓦ 7⁄64
.71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 57° 65° 70° 73°
QJJS 6530 ⓦ 9⁄64
1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 58° 65° 69° 72°
MALE BODY 6540 ⓦ 5⁄32
1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 59° 65° 68° 72°
65° 6550 ⓦ 11⁄64
1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 60° 65° 68° 71°
6560 ⓦ 3⁄16
2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 60° 65° 68° 71°
6570 ⓦ 13⁄64
2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 60° 65° 68° 71°
65100 ⓦ 1⁄4
3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 58° 65° 69° 70°
65150 ⓦ 19⁄64
5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 59° 65° 68° 70°
SEAL 65200 ⓦ 11⁄32
7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 60° 65° 67° 69°
Buna-N (standard) 500017 ⓦ .011 .012 .015 .017 .021 .024 .027 .038 .047 27° 50° 65° 74°
VITON (optional) 500025 ⓦ .013 .018 .022 .025 .031 .035 .040 .06 .07 29° 50° 64° 71°
500033 ⓦ .015 .023 .029 .033 .040 .047 .052 .07 .09 30° 50° 62° 68°
500050 ⓦ .018 .035 .043 .050 .06 .07 .08 .11 .14 32° 50° 60° 66°
500067 ⓦ .021 .05 .06 .067 .08 .09 .11 .15 .18 35° 50° 60° 66°
5001 ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 37° 50° 59° 65°
50015 ⓦ .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 38° 50° 58° 64°
5002 ⓦ .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 39° 50° 57° 63°
5003 ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 40° 50° 56° 62°
5004 ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 42° 50° 56° 61°
SPRAY TIP 50° 5005 ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 44° 50° 56° 61°
(See Chart) 5006 ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 45° 50° 56° 60°
FLAT SPRAY
5008 ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 45° 50° 55° 60°
5010 ⓦ 5⁄64
.35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 45° 50° 55° 59°
5015 ⓦ 3⁄32
.53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 45° 50° 55° 59°
5020 ⓦ 7⁄64
.71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 45° 50° 55° 59°
5030 ⓦ 9⁄64
1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 45° 50° 55° 59°
TYPICAL SPRAY 5040 ⓦ 5⁄32
1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 46° 50° 54° 59°
8.9 11.0
NOZZLE ASSEMBLY 5050 ⓦ 11⁄64
1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 46° 50° 54° 59°
11.2 13.7
FOR QVV, QU & QLU 5060 ⓦ 3⁄16
2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 46° 50° 54° 59°
13.4 16.4
SPRAY TIPS 5070 ⓦ 13⁄64
2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 46° 50° 54° 59°
15.7 19.2
50100 ⓦ 1⁄4
3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 44° 50° 52° 54°
50120 ⓦ 17⁄64
4.2 6.0 8.5 10.4 12.0 14.7 17.0 19.0 27 33 44° 50° 53° 55°
50150 ⓦ 19⁄64
5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 45° 50° 52° 55°
50200 ⓦ 11⁄32
7.1 10.0 14.1 17.3 20 25 28 32 44 55 46° 50° 52° 55°
400017 ⓦ .011 .012 .015 .017 .021 .024 .027 .038 .047 21° 40° 54° 61°
400025 ⓦ .013 .018 .022 .025 .031 .035 .040 .06 .07 22° 40° 53° 60°
400033 ⓦ .015 .023 .029 .033 .040 .047 .052 .07 .09 22° 40° 53° 60°
400050 ⓦ .018 .035 .043 .050 .06 .07 .08 .11 .14 22° 40° 53° 60°
QJ AND QJL 400067 ⓦ .021 .05 .06 .067 .08 .09 .11 .15 .18 24° 40° 53° 60°
FEMALE BODIES 4001 ⓦ .026 .07 .09 .10 .12 .14 .16 .22 .27 26° 40° 52° 59°
40015 ⓦ .031 .11 .13 .15 .18 .21 .24 .34 .41 27° 40° 52° 59°
4002 ⓦ .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 29° 40° 51° 58°
4003 ⓦ .043 .15 .21 .26 .30 .37 .42 .47 .67 .82 30° 40° 50° 57°
4004 ⓦ .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 30° 40° 50° 56°
4005 ⓦ .057 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 31° 40° 49° 55°
4006 ⓦ .062 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 31° 40° 49° 55°
40° 4008 ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 31° 40° 47° 53°
4010 ⓦ 5⁄64
.35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 32° 40° 45° 48°
QJJ AND QJJL 4015 ⓦ 3⁄32
.53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 32° 40° 45° 48°
MALE BODIES 4020 ⓦ 7⁄64
.71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 32° 40° 45° 48°
4030 ⓦ 9⁄64
1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 33° 40° 45° 48°
4040 ⓦ 5⁄32
1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 34° 40° 45° 48°
4050 ⓦ 11⁄64
1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 35° 40° 45° 48°
4060 ⓦ 3⁄16
2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 35° 40° 45° 48°
4070 ⓦ 13⁄64
2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 35° 40° 45° 48°
40100 ⓦ 1⁄4
3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 34° 40° 43° 46°
SEAL 40150 ⓦ 19⁄64
5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 35° 40° 43° 44°
Buna-N (standard) 40200 ⓦ 11⁄32
7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 36° 40° 42° 44°
VITON (optional) 250017 ⓦ .011 .015 .017 .021 .024 .027 .038 .047 25° 35° 47°
250025 ⓦ .013 .022 .025 .031 .035 .040 .06 .07 25° 35° 45°
250033 ⓦ .015 029 .033 .040 .047 .052 .07 .09 25° 34° 44°
250050 ⓦ .018 .043 .050 .06 .07 .08 .11 .14 25° 34° 43°
250067 ⓦ .021 .06 .067 .08 .09 .11 .15 .18 25° 34° 42°
25° 2501 ⓦ .026 .07 .09 .10 .12 .14 .16 .22 .27 14° 25° 34° 42°
25015 ⓦ .031 .11 .13 .15 .18 .21 .24 .34 .41 15° 25° 34° 41°
2502 ⓦ .036 .14 .17 .20 .25 .28 .32 .45 .55 15° 25° 33° 40°
2503 ⓦ .043 .21 .26 .30 .37 .42 .47 .67 .82 15° 25° 33° 40°
2504 ⓦ .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 16° 25° 32° 39°
SPRAY TIP 2505 ⓦ .057 .25 .35 .43 .50 .61 .71 16° 25° 32° 39°
.79 1.1 1.4
(See Chart) 2506 ⓦ .062 .30 .42 .52 .60 .73 .85 17° 25° 31° 38°
.95 1.3 1.6
Material Material Codes
Q Q Q Q Q no material code = Brass
Q Q Q Q Q SS = 303 Stainless Steel
QUICK
SPRAY NOZZLE TIPS
TYPICAL ASSEMBLY
FOR MINIATURE
QUICK VEEJET
SPRAY NOZZLES
PERFORMANCE DATA
A
Spray QUICK Equiv. CAPACITY SPRAY 21
Angle Capacity VEEJET Orifice (gallons per minute) ANGLE
at Size SPRAY TIPS Diam.
40 psi 5 10 20 30 40 60 80 100 200 300 20 40 80 200
Inches
QUICKJET SYSTEM
QSVV QVV QSU QU QLU psi psi psi psi psi psi psi psi psi psi psi psi psi psi
2508 ⓦ .072 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 17° 25° 31° 38°
2510 ⓦ 5⁄64 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 18° 25° 31° 37°
2515 ⓦ 3⁄32 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 18° 25° 31° 37°
QJJS 2520 ⓦ 7⁄64 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 19° 25° 31° 37°
MALE BODY 2530 ⓦ 9⁄64 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 20° 25° 30° 36°
25° 2540 ⓦ 5⁄32 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 21° 25° 29° 35°
2550 ⓦ 11⁄64 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 21° 25° 29° 35°
2560 ⓦ 3⁄16 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 22° 25° 29° 35°
2570 ⓦ 13⁄64 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 22° 25° 29° 35°
25100 ⓦ 1⁄4 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 23° 25° 28° 32°
SEAL 25150 ⓦ 19⁄64 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 24° 25° 28° 30°
Buna-N (standard) 25200 ⓦ 11⁄32 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 24° 25° 26° 29°
VITON (optional) 150017 ⓦ .011 .015 .017 .021 .024 .027 .038 .047 15° 30° 37°
150025 ⓦ .013 .022 .025 .031 .035 .040 .06 .07 15° 28° 34°
150033 ⓦ .015 .029 .033 .040 .047 .052 .07 .09 15° 27° 32°
150050 ⓦ .018 .043 .050 .06 .07 .08 .11 .14 15° 26° 30°
150067 ⓦ .021 .06 .067 .08 .09 .11 .15 .18 15° 25° 29°
1501 ⓦ .026 .09 .10 .12 .14 .16 .22 .27 15° 24° 28°
15015 ⓦ .031 .13 .15 .18 .21 .24 .34 .41 15° 23° 27°
15° 1502 ⓦ .036 .14 .17 .20 .25 .28 .32 .45 .55 6° 15° 22° 27°
1503 ⓦ .043 .21 .26 .30 .37 .42 .47 .67 .82 6° 15° 22° 27°
SPRAY TIP 1504 ⓦ .052 .28 .35 .40 .49 .57 .63 .89 1.1 7° 15° 21° 26°
(See Chart) 1505 ⓦ .057 .35 .43 .50 .61 .71 .79 1.1 1.4 7° 15° 21° 26°
FLAT SPRAY
1506 ⓦ .062 .42 .52 .60 .73 .85 .95 1.3 1.6 8° 15° 21° 26°
1508 ⓦ .072 .56 .69 .80 .98 1.1 1.3 1.8 2.2 9° 15° 20° 25°
1510 ⓦ 5⁄64 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 10° 15° 19° 24°
1515 ⓦ 3⁄32 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 10° 15° 19° 24°
1520 ⓦ 7⁄64 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 10° 15° 19° 23°
TYPICAL SPRAY
NOZZLE ASSEMBLY 000009 ⓦ .008 .003 .005 .006 .008 .009 .011 .013 .014 .020 .025
FOR QVV, QU & QLU 000012 ⓦ .010 .004 .006 .008 .01 .012 .015 .017 .019 .027 .033
SPRAY TIPS 000019 ⓦ .012 .007 .009 .013 .016 .019 .023 .027 .03 .043 .052
000021 ⓦ .0135 .007 .01 .015 .018 .021 .026 .03 .033 .047 .058
000050 ⓦ .020 .018 .025 .035 .043 .050 .06 .07 .08 .11 .14
000067 ⓦ .023 .024 .033 .05 .06 .067 .08 .09 .11 .15 .18
0001 ⓦ .028 .035 .05 .07 .09 .10 .12 .14 .16 .22 .27
00015 ⓦ .033 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41
0002 ⓦ .039 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55
0003 ⓦ ⓦ .047 .10 .15 .21 .26 .30 .37 .42 .47 .67 .82
0004 ⓦ ⓦ .055 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1
0005 ⓦ .061 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4
QJ AND QJL
0006 ⓦ ⓦ .067 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6
FEMALE BODIES
0° 0008 ⓦ ⓦ .078 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 0°
0010 ⓦ .086 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 SOLID STREAM
0015 ⓦ .107 .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1
0020 ⓦ .125 .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5
0030 ⓦ 9⁄64 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2
0040 ⓦ 5⁄32 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 9.0 11.0
0050 ⓦ 11⁄64 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7
0060 ⓦ 3⁄16 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4
0070 ⓦ 13⁄64 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2
QJJ AND QJJL 0080 ⓦ 13⁄64 2.8 4.0 5.6 6.9 8.0 9.8 11.3 12.6 17.9 22
MALE BODIES 00100 ⓦ 15⁄64 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27
00120 ⓦ 1⁄4 4.2 6.0 8.5 10.4 12.0 14.7 17.0 19.0 27 33
00150 ⓦ 19⁄64 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41
00200 ⓦ 21⁄64 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55
00250 ⓦ 3⁄8 8.8 12.5 17.7 22 25 31 35 40 56 68
Material Material Codes
Q Q Q Q Q no material code = Brass
SEAL
Buna-N (standard) Q Q Q Q Q SS = 303 Stainless Steel
VITON (optional)
ORDERING INFORMATION
QUICKJET
COMPLETE NOZZLE
SPRAY TIP
NOZZLE
SPRAY TIP BODY + QVV - SS 11010
(See Chart)
Tip Material Capacity
Type Code Size
QUICK SPRAY NOZZLES
ProMax® spray nozzle system
A
22 QPT
ProMax Quick VeeJet
flat spray tips
QUICKJET SYSTEM
3
/8 QPP
NOZZLE BODY
White Gray Black Orange
1.0 gpm 1.5 gpm 2.0 gpm 3.0 gpm
(3.8 l/min) (5.7 l/min) (7.6 l/min) (11.4 l/min)
DESIGN FEATURES
ProMax Quick VeeJet flat spray Accurate alignment Engineered for performance
nozzles are molded of a The tip and body assemblies The ProMax QuickJet spray
chemically-coupled, glass- are designed with a built-in stop nozzle system is the product of
reinforced, engineering grade of to assure correct alignment of several years quick connect
polypropylene that combines the flat spray each time it’s experience.
exceptional durability with installed. Eliminates time Spray tip changeout is quick and
chemical resistance. The simple, consuming manual alignment.
1
/8 QPP effortless even in harsh environ-
three-part assembly features a
NOZZLE BODY ments where chemical buildup
unique locking design that Eight capacities
can be a problem.
makes tip changing quick and ProMax Quick VeeJet spray tips
effortless. When being installed, are available in eight capacities Each tip produces a uniform
the spray tip is automatically from 1 to 7 gpm at 40 psi (3.8 to and consistent tapered edge
locked into correct alignment. 26 l/min at 2.8 bar). Each capac- flat spray pattern for accurate
Internal VITON The tips are color-coded by flow ity size is available in any of six coverage across the header
O-ring rate for easy identification. with overlapping sprays.
spray angles, 25°, 40°, 50°, 65°,
Spray tip changeout can be 80°, and 95°.
accomplished in seconds. You The gray nozzle bodies are
simply turn the tip 90° to remove available with NPT or BSPT male
or install it. Tip installation and threads in 1⁄8), 1⁄4), and 3⁄8) sizes.
Optional external removal is done by hand, without A standard internal VITON
O-ring tools. The tip is contoured for easy
COMMON APPLICATIONS
O-ring provides a positive seal
gripping. The ProMax nozzle between body and tip. ⓦ Parts washing/rinsing
material is resistant to caking and ⓦ Chemical manufacturing
build-up. An optional external
O-ring is available for additional ⓦ Metal finishing
protection against contaminants ⓦ Food processing
that might make tip changeout
ⓦ Cooling
difficult in a harsh environment.
ⓦ Coating
SPRAY TIP
(See Chart)
QUICK SPRAY NOZZLES
ProMax® spray nozzle system (CONT.)
FEATURES
A
23
ⓦ Quick connect design makes ⓦ Reinforced polypropylene ⓦ Nozzle body threads are
tip changing fast. No tools construction for strength and available in 1⁄8), 1⁄4), or 3⁄8)
QUICKJET SYSTEM
required. chemical resistance. sizes…NPT or BSPT (M).
ⓦ Spray tips are color-coded for ⓦ Maximum pressures to 250 ⓦ Maximum temperatures to
capacity. Nozzle bodies are psi at 40°F (17.2 bar at 4°C). 200°F at 100 psi (93°C at 7 bar).
light gray.
ⓦ Internal stop for positive align-
ment of tip. ProMax QuickJet nozzle maximum pressures
ⓦ Standard internal VITON at various temperatures
O-ring. bar psi
ⓦ Optional external O-ring 17 250
suggested for applications
where nozzle becomes coated 14 200
with spray material – for easier
10 150
tip removal.
OPERATING
PRESSURE
ⓦ Spray angles of 25°, 40°, 50°, 7 100
REGION
65°, 80° and 95°.
3.5 50
0 0
40 60 80 100 120 140 160 180 200 (°F)
FLAT SPRAY
4 16 27 38 49 60 71 82 93 (°C)
LIQUID TEMPERATURE
PERFORMANCE DATA
ProMax Quick VeeJet Flat Spray Tips CAPACITY (gallons per minute)
A simple 90° hand turn of the Tip
Spray Angle at 40 psi
spray tip quickly installs or Color 5 10 20 30 40 60 80 100 200
removes the spray tip from the 25° 40° 50° 65° 80° 95° psi psi psi psi psi psi psi psi psi
body. Installed tips are auto- QPT2510* QPT4010 QPT5010 QPT6510 QPT8010 QPT9510 White .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2
matically aligned. .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4
QPT2515* QPT4015 QPT5015 QPT6515 QPT8015 QPT9515 Gray
QPT2520* QPT4020 QPT5020 QPT6520 QPT8020 QPT9520 Black .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5
QPT2530 QPT4030 QPT5030 QPT6530 QPT8030 QPT9530 Orange 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7
QPT2540 QPT4040 QPT5040 QPT6540 QPT8040 QPT9540 Green 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9
QPT2550** QPT4050** QPT5050** QPT6550** QPT8050** QPT9550** Yellow 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2
QPT2560** QPT4060** QPT5060** QPT6560** QPT8060** QPT9560** Blue 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4
QPT2570** QPT4070** QPT5070** QPT6570** QPT8070** QPT9570** Red 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7
* Not recommended below 0.5 bar.
** For 1⁄4) and 3⁄8) bodies only.
QJL
FEMALE BODY
DESIGN FEATURES
The QLP Quick FlatJet spray These spray nozzle tips feature
nozzle tips offer a one piece a very high impact flat spray pat-
design with the convenience of tern with narrow spray angles…
a quick-connect 1⁄4 turn instal- plus producing a uniform spray
lation and automatic spray distribution of medium sized
QJJL alignment without the use of droplets. The spray pattern has
MALE BODY tools. Large unobstructed flow very sharply defined edges.
passages are machined to help
FLAT SPRAY
PERFORMANCE DATA
CAPACITY SPRAY
Orifice
Nozzle (gallons per minute) ANGLE
Capacity Diam.
Inlet Conn.
SEAL NPT or BSPT
Size Nom.
15 20 30 40 60 80 100 150 15 40 100
Buna-N (standard) Inches
psi psi psi psi psi psi psi psi psi psi psi
VITON (optional)
5060 3 16
⁄ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 42° 50° 53°
50125 17 64
⁄ 7.6 8.8 10.8 12.5 15.3 17.7 19.7 24 38° 50° 59°
3
⁄, ⁄
8 12
3560 11 64
⁄ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 29° 35° 39°
3580 13 64
⁄ 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 26° 35° 40°
Material Material Codes
Q no material code = Brass
Q SS = 303 Stainless Steel
SPRAY ANGLE
Pipe Inlet
STANDARD BODY TYPE COMMON APPLICATIONS ORDERING INFORMATION
Conn. NPT (F) (M)
or BSPT ⓦ Washing crushed stone and QUICKJET
QJL QJJL COMPLETE NOZZLE
gravel
38
⁄ ⓦ ⓦ
ⓦ High impact washing SPRAY TIP
12
⁄ ⓦ ⓦ NOZZLE
ⓦ Degreasing BODY + QLP - SS 5060
ⓦ Fruit and vegetable washing
Tip Material Capacity
ⓦ Paper machine “deckle” spray Type Code Size
QUICK SPRAY NOZZLE TIPS
WIDE ANGLE (FOR LIQUID, AIR AND STEAM)
TYPICAL ASSEMBLY
A
FOR QTK QTK QSTK 25
SPRAY TIP
Quick FloodJet Quick FloodJet
spray tip miniature spray tip
QUICKJET SYSTEM
QJ
FEMALE BODY
DESIGN FEATURES
QJJ QTK Quick FloodJet spray tips The QSTK series Mini-Quick
MALE BODY provide a wide range of small FloodJet spray nozzle tips offer
and medium capacity sizes. a variety of low capacity sizes,
These spray tips feature a wide and feature a very small tip size,
angle flat spray pattern with saving you valuable space in
medium impact…producing all confined applications.
SEAL uniform spray distribution of
Buna-N (standard) medium sized droplets.
FLAT SPRAY
VITON (optional)
PERFORMANCE DATA LIQUID
QUICK CAPACITY SPRAY
Nozzle Orifice
FLOODJET (gallons per minute) ANGLE
Inlet Conn. Capacity Diam.
TIP TYPE Nom.
NPT or BSPT Size
3 5 7 10 15 20 30 40 60 7 20 60
Inches
QTK QSTK psi psi psi psi psi psi psi psi psi psi psi psi
QJEG
FEMALE BODY
DESIGN FEATURES
QEG Quick WashJet spray nozzle They also offer a safety lock
tips produce a uniform spray feature which prevents the
distribution of medium-sized drop- spray tips from releasing at
lets. The orifices are precision- high pressures.
machined for accurate control
*For applications at higher
of flow rates. All these spray tips
pressures consult factory for
provide you with the benefit of a
recommendations and
quick-connect 1⁄4 turn installation
performance data.
and automatic spray alignment.
FLAT SPRAY
QJJEG
MALE BODY PERFORMANCE DATA
Nozzle CAPACITY
SPRAY ANGLE
Inlet (gallons per minute)
Capacity
Conn. Size
NPT or ** 300 400 500 600 700 800 1000 1500 2000 2500 3000
00° 15° 25° 40° 50° 65° psi psi psi psi psi psi psi psi psi psi psi
BSPT
ⓦ 02 .55 .63 .71 .77 .84 .89 1.0 1.2 1.4 1.6 1.7
SEAL ⓦ 03 .82 .95 1.1 1.2 1.3 1.4 1.5 1.8 2.1 2.4 2.6
Buna-N (standard) ⓦ ⓦ ⓦ ⓦ ⓦ 04 1.1 1.3 1.4 1.6 1.7 1.8 2.0 2.5 2.8 3.2 3.5
VITON (optional) ⓦ ⓦ ⓦ ⓦ ⓦ 045 1.2 1.4 1.6 1.7 1.9 2.0 2.3 2.8 3.2 3.6 3.9
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 05 1.4 1.6 1.8 1.9 2.1 2.2 2.5 3.1 3.5 4.0 4.3
ⓦ ⓦ ⓦ ⓦ 055 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.4 3.9 4.3 4.8
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 06 1.6 1.9 2.1 2.3 2.5 2.7 3.0 3.7 4.2 4.7 5.2
ⓦ ⓦ ⓦ ⓦ 065 1.8 2.1 2.3 2.5 2.7 2.9 3.3 4.0 4.6 5.1 5.6
18
⁄ , 1⁄4 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 07 1.9 2.2 2.5 2.7 2.9 3.1 3.5 4.3 4.9 5.5 6.1
ⓦ ⓦ 075 2.1 2.4 2.7 2.9 3.1 3.4 3.8 4.6 5.3 5.9 6.5
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 08 2.2 2.5 2.8 3.1 3.4 3.6 4.0 4.9 5.7 6.3 6.9
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 09 2.5 2.9 3.2 3.5 3.8 4.0 4.5 5.5 6.4 7.1 7.8
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 10 2.7 3.2 3.5 3.9 4.2 4.5 5.0 6.1 7.1 7.9 8.7
ⓦ ⓦ ⓦ ⓦ ⓦ 15 4.1 4.7 5.3 5.8 6.3 6.7 7.5 9.2 10.6 11.9 13.0
ⓦ ⓦ ⓦ ⓦ ⓦ 20 5.5 6.3 7.1 7.7 8.4 8.9 10.0 12.3 14.1 15.8 17.3
**00° = Solid Stream
Pipe Inlet
STANDARD BODY TYPE occasional clogging problems 1
⁄8QJJEG + QEG 9
⁄16) 131⁄64) 1.2 oz.
Conn. NPT (F) (M) 1
⁄4QJEG + QEG 5
⁄8) 1 ⁄64)
33
1.5 oz.
ⓦ Pressure wash application
or BSPT QJEG QJJEG with nozzles mounted in hard 1
⁄4QJJEG + QEG 9
⁄16) 131⁄64) 1.3 oz.
18
⁄ ⓦ ⓦ to reach places
1⁄4
ⓦ ⓦ
ORDERING INFORMATION
QUICKJET
COMPLETE NOZZLE
NOZZLE BODY SPRAY TIP
section B
2
UNIJET SYSTEM
NOZZLE BODIES STRAINERS, ETC. SPRAY TIPS PLATES OUTLET FITTINGS RETAINERS
Metal Hose
Slotted Type Standard Metering Shank Outlet
Nozzle Strainer Full Cone Orifice
Wall Mounting
Adapter
NPT or BSPT
Square (M) Outlet
Full Cone
Channel Mount Cup Type
Nozzle Strainer
Reducing NPT
NPT or BSPT or BSPT (F)
(F) Outlet Outlet Adapter
Wide Spray
Full Cone
Fused Bronze
Nozzle Strainer
Hose Shank
INDEX TO UNIJET
Flat Fan
Type SPRAY TIPS
Disc Type UniJet spray tips are available
Nozzle Strainer in a wide variety of materials,
FloodJet® capacities, and spray patterns.
Type For specific information about
spray tips, consult the appropriate
Combination Strainer
Check Valve spray pattern section.
Split-Eyelet
Blow-Off page Flat Spray page
Type UniJet® System TP..................................B16-B19
Components ....................B2-B5 TK .........................................B20
Check Valve Quick UniJet® High Pressure
System.............................B6, B7
WashJet® EG.........................................B21
Type
Hollow Cone TC.................................B22, B23
Swivel TX, T-W ...................................B8
Jet Stabilizer
D .....................................B9, B10 Fine Spray
Tungsten
Carbide TN, TNSSTC ........................B24
Full Cone
23825, HV ORIFICES, 11430,
TG .........................................B11
Threaded BLOW-OFF NOZZLES .........B25
TG-SQ ..................................B12
Fine Spray 22624, 23945........................B26
TG-W ....................................B13
TH-W ....................................B14
D ...........................................B15
Diaphragm Fogger Spray
Check Valve
UNIJET® STANDARD NOZZLE SPLIT-EYELET BODIES
BODIES
NOZZLE ASSEMBLY B
UniJet nozzles consist of a
nozzle body, a spray tip, and a
3
tip retainer. Additional compo-
nents such as strainers, check
valves, special adapters and
metering orifices can also be
included in the assembly.
UNIJET SYSTEM
UniJet nozzle bodies and tip 7421 series UniJet split eyelet
Nozzle Bodies retainers are available as stock nozzle bodies provide a fast and
Standard UniJet nozzle bodies items in brass, aluminum, nylon, economical way of installing
have pipe thread (male or mild steel, 303 stainless steel, UniJet nozzles on pipe or tubing.
female) inlet connections in !\°" and 316 stainless steel. Inlet Drill a (\‹¤" (7.2 mm) hole in the
to !\¤" sizes. All outlet connections connections are !\°", !\›", #\°" or pipe and clamp the assembly in
are !!\⁄fl"-16 male thread to fit !\¤" NPT or BSPT (male or place for a positive, leak-proof
UniJet tip retainers and adapters. female). Outlet connections are seal. This cuts costs by elimi-
!!\⁄fl"-16 male thread to fit UniJet nating cutting, threading and
The UniJet system also provides
tip retainers and adapters. brazing operations. Connector
special nozzle bodies. Nozzle
bodies are machined from solid
bodies with hose shanks, swivels,
split-eyelet clamps, adjustable + Nozzle
Inlet
Conn.
Nozzle Body
Sub-Assembly
Order Number Material
bar stock in brass or stainless
steel. The body inlet extends
mounting clamps and diaphragm NPT or
BSPT Female Male well into the pipe to retard the
check valves are all available.
1/8T 1/8TT Brass entry of sediment and minimize
Spray Tips 1/8 clogging. Split-eyelet connectors
1/8T-SS 1/8TT-SS Stainless
UniJet spray tips offer a wide Steel fit on piping !\¤"-1". They are de-
selection of spray patterns, 1/4T 1/4TT Brass signed for use at pressures up to
capacities, and materials. Flat 1/4T-NYB 1/4TT-NYB Nylon 250 psi (17 bar) and provide flow
spray, full cone, hollow cone and rates up to 3 gpm (11.4 l/min).
solid stream patterns, as well as + 1/4 1/4T-I 1/4TT-I Steel
1/4T-SS 1/4TT-SS Stainless *Split Eyelet To Clamp On
metering orifices and atomizing Steel Nozzle
Body Sub-
tips are all available in the UniJet 3/8T 3/8TT Brass Assembly
Body Tubing Pipe
system. Capacities range from 3/8 Mat. O.D. Size
Order No.
3/8T-SS 3/8TT-SS Stainless
0.003 to 25 gpm (0.01 to 94 l/min). Steel
13⁄16),
7421-1/2T Brass
1/2T 1/2TT Brass 20-22 mm 12⁄)
Tip Retainers
1/2 7⁄8)
1/2T-SS 1/2TT-SS Stainless 7421-1/2T-SS SS
UniJet tip retainers fit all UniJet
nozzle bodies. Tip retainers hold + Steel
7421-3/4T Brass 1),
25-27 mm 34⁄)
spray tips and other nozzle com-
7421-3/4T-SS SS 11⁄16)
ponents firmly in place. Adapters
with !!\⁄fl"-16 inlet thread are 7421-1T Brass 11⁄4),
32-35 mm 1)
available with NPT or BSPT out- 7421-1T-SS SS 13⁄8)
lets, hose shank connections and *Also available in stainless steel.
wall mount connections for use
in place of standard retainers. SHUT-OFF
Type 8360 diaphragm check Type 4664B nozzle bodies are UniJet swivel nozzle bodies allow Outlet connections are !!\⁄fl"-16
valve nozzle bodies feature a available in brass or aluminum exact positioning of spray nozzles male thread for use with UniJet
nylon body with a stainless steel with a stainless steel valve seat. at any angle within the swivel arc nozzle components. Construction
valve seat. The outlet is in line They feature !\°" NPT or BSPT range. A locknut holds the swivel is of brass or aluminum and the
with the !\›" NPT or BSPT (M) (F) inlet connection at a 90° in place with no slipping. swivels operate at pressures up
inlet. Maximum capacity of this angle to the UniJet thread outlet. to 125 psi (9 bar).
UniJet swivel nozzle bodies
unit is 2 gpm (7.6 l/min). Maximum flow rate for this unit is feature single or double outlets
1.5 gpm (5.7 l/min).
Type 8355 diaphragm check and arc ranges of 280° or 360°. Swivel Order No. (Brass)
valve nozzle bodies feature a Type 6135A diaphragm check They are available with !\°" or ⁄ ) NPT or BSPT (F) 1⁄4) NPT or BSPT(F)
18
nylon body and valve seat. Inlet valve nozzle bodies are construct- !\›" NPT or BSPT (F) inlet
5000-1⁄8T 5000-1⁄4T
connections are a choice of !\°" ed of brass throughout. Inlet connections. 4202-2-1⁄8T 4202-2-1⁄4T
or !\›" NPT or BSPT (F) and are connections are available in !\›" 7620B-T 7620-T
at a 90° angle to the UniJet or #\°" NPT or BSPT (F) and are 7450B-2T 7450-2T
thread outlet. Type 8355 nozzle at a 90° angle to the UniJet
bodies offer a maximum flow thread outlet. Maximum capacity
rate of 2.5 gpm (9.5 l/min). is 4 gpm (15 l/min).
STRAINERS AND CHECK VALVES JET STABILIZER ADAPTERS
5053 4067 11950 4865
B
5
Type 5053 strainers feature
a brass, stainless steel, or Type 4067 cup strainers are UniJet 11950 Jet Stabilizers Type 4865 wall mounting
polypropylene body with a stainless steel throughout, and increase spray projection adapters are made of brass or
stainless steel screen. Mesh offer mesh screen sizes of 50, distance and spray impact on flat stainless steel. They feature a
100 or 200. spray tips which are mounted at 3Ú4) NPT or BSPT male external
screen sizes of 24, 50, 100 or
UNIJET SYSTEM
200 are available. a 90¡ angle to the liquid supply thread which permits mounting
line. Available in brass, aluminum the nozzle assembly into a tank
Strainer Strainer 7630 and stainless steel; all with a wall or other supporting member.
Order No. Body Material stainless steel guide vane. Write Write for Data Sheet 4865.
5053*--SS Brass for Data Sheet 12098-1.
8079-PP-*
6051-SS-*
Polypropylene
Stainless Steel
4676
*mesh size
Type 7630 disc strainers are
PLATES
4514 constructed entirely of stainless
4916
steel. Mesh screen sizes of 50, Type 4676 adapters are made of
100 or 200 are available. Write brass or stainless steel. They
for Data Sheet 10168. feature outlet connections of 1Ú8),
1Ú4), 3Ú8), or 1Ú2) NPT or BSPT
Type 4514 slotted strainers are Type 4916 metering plates are female thread. Write for Data
available in brass, aluminum, or 9106 made of stainless steel. They Sheet 10896.
nylon. They are available in a are supplied in eighty-two orifice
choice of milled slot sizes diameter sizes ranging from .008)
equivalent to 16, 25, or 50 mesh to .250) (.2 mm to 6.35 mm). OUTLET FITTINGS
screens. They provide a liquid capacity Outlet fittings are used with 1325
Type 9106 fused bronze filters range at 30 psi (2 bar) of .0073 tip retainers to provide a different
Strainer Available Mesh are equivalent to a 300 mesh gpm to 6.9 gpm (.03 I/min to 26 outlet connection.
Order No. Material Sizes screen. They provide effective I/min). Write for Data Sheets
4514*--10
Brass or
50 filtering action of the liquid. 11739, 12417, and 23471-2.
6406
Nylon
Brass, Aluminum
4514*--20 25
or Nylon
4514*--32
Brass, Aluminum
16 11750 3942
or Nylon
Type 6406 adapters have an
*Above numbers for brass. For nylon add
“NY”. For aluminum add “AL”. overall length of 15Ú16) (2.38 cm).
They are made of brass, mild
steel or aluminum, with a 1Ú8) NPT
Type 11750 check valves are
4193A designed for use in larger Type 3942 plug plates are used
or BSPT male outlet connection.
capacity nozzles where in place of spray tips to shut off
strainers are not required. The
check ball opens at 5 psi (0.35
liquid flow. They are made in a 6250
choice of brass or stainless steel.
bar) or 10 psi (.7 bar), and
Type 4193A strainers include
allows flows up to 1.5 gpm
a built-in check valve. 4193A
strainers are available with
(5.7 I/min). Type 11750 check TIP RETAINERS Type 6250 adapters have an
valves are available in brass, overall length of 9Ú16) (1.43 cm).
brass, stainless steel,
aluminum, or polypropylene
stainless steel, aluminum, or 1325 They are made of brass,
polypropylene with a stainless stainless steel, or mild steel,
bodies. Springs, balls, and
steel ball and spring. Write for with female 1Ú8) NPT or BSPT
screens are stainless steel.
Data Sheet 11750. outlet connections.
Mesh sizes available: 24, 50,
100, 200. Springs with opening
pressures of 5 psi (.35 bar),
10 psi (.7 bar), 20 psi (1.4 bar),
Type 1325 tip retainers are used 4928
to hold the nozzle assembly
40 psi (2.8 bar). Write for Data
together. They are made of
Sheet 4193A.
brass, stainless steel, steel or
CHECK VALVE nylon. Inlet connections are
STRAINER ORDER NUMBER 11Ú16)-16 female thread.
Type 4928 adapters have an
4193A-SS- 5 -50SS Tip Retainer overall length of 1) (2.54 cm).
Material They are made of brass,
Order No.
Material Spring Screen 1325 Brass aluminum or stainless steel,
Code Opening Mesh
Pressure 1325-SS Stainless Steel with a 1Ú8) NPT or BSPT female
(psi) 8027-NYB Nylon outlet connection.
QUICK
SPRAY NOZZLE SYSTEM
Hand twist to
Hand twist to right “CLICK”
left “CLICK” and cap is on
and cap is off. ready to spray.
Can be mounted to !\¤", #\›", or 1" Mounts to !\¤", #\›", or 1" pipe Includes the Quick UniJet System This assembly includes the
pipe. Features ChemSaver® drip- with #\°" (9.5mm) hole. Assembly feature with male !\›" NPT or Quick UniJet System with
free shut-off, requiring 10 psi accommodates pressures to BSPT connection. Maximum !\›" NPT or BSPT female
(.7 bar) at nozzle to open check 300 psi (20 bar). Types operating pressure to 300 psi connection. Maximum operating
valve, EPDM diaphragm with QJ17560 and QJ7421 in 1⁄2" (20 bar). pressure to 300 psi (20 bar).
optional VITON available. Assembly and 3⁄4" sizes can be mounted
requires #\°" (9.5mm) hole in pipe for to a flat surface using the Pipe Pipe
Part No. Part No.
Connection Connection
mounting. Maximum operating mounting hole provided in the
pressure 300 psi (20 bar). upper clamp sub-assembly. QJ Q\‰TT-NYB Q\‰" NPT or BSPT (M) QJ Q\‰T-NYB Q\‰" NPT or BSPT (F)
QJT-NYB ⁄ ) - 16
11 16
QUICK
COLOR-CODED CAPS
UNIJET SYSTEM
gasket CP19438-EPR
up to 300 psi (20 bar). EPDM
Cap Ð The caps are designed Standard
Quick UniJet Cap
with grooves that fit locating lugs
on the nozzle body. Caps are
made of nylon and are available CP19438-VI
for use with all UniJet spray tips. VITON
optional
Quick UniJet Cap and Seat Gasket Set
ORDERING INFORMATION
Part Number
Quick UniJet Caps For Use with Spray Tips
Quick UniJet Quick UniJet Cap &
Cap Only Seat Gasket Set
18999-EPR**
(EPDM Standard) **Used with
Disc-Core Sprays
CP25607- * -NY — (Insert Core
18999-VI** into Seal)
D-Disc Core (VITON optional)
Permits use of standard !\°" and !\›" nozzles. Can be used for
— QJ 4676** mounting pressure gauge at the nozzle. See Data Sheet No. 20055
for more information.
* Specify color code (see chart). Unless otherwise specified, a Yellow (6) Cap will be supplied.
** These Quick UniJet Caps available only in black.
How to Order: For cap and seat gasket set, specify set no. and color code. Example: 25612-3-NYR
For cap only, specify part no. and color code. Example: CP25611-3-NY
For seat gasket, specify part no. Example: CP19438-EPR
SPRAY NOZZLE TIPS
HOLLOW CONE
TX T-W
B Hollow Cone spray tip
standard spray
Hollow Cone spray tip
wide spray
8
T
FEMALE BODY
UNIJET SYSTEM
OR
DESIGN FEATURES
TX series UniJet hollow cone T-W series tips feature the same
tips feature extra fine spray spray characteristics and con-
atomization with a uniform struction as TX tips with an extra
distribution at relatively low wide hollow cone spray angle.
pressures and capacities.
PERFORMANCE DATA
CAPACITY
gph (gallons per hour) at SPRAY
Tip No. Inlet Orifice psi (pound per square inch) ANGLE*
and Openings Screen
Capacity Diam. Mesh
TT in Inches 20 30 40 60 80 100 150 200 400 20 40
Size
psi psi psi psi psi psi psi psi psi psi psi
MALE BODY
TX.60 One .012 x .010 .014" 200 .71 .80 .88 1.0 1.2 1.6
TX1 One .016 x .015 .020" 100 .89 1.0 1.2 1.3 1.5 1.7 1.9 2.6 54°
TX1.25 One .020 x .020 .022" 100 1.1 1.25 1.5 1.7 1.8 2.2 2.4 3.2 59°
HOLLOW CONE
TX1.5 One .024 x .020 .024" 100 1.3 1.5 1.8 2.0 2.2 2.6 2.9 3.9 63°
TX2 One .028 x .024 .028" 100 1.5 1.8 2.0 2.4 2.7 3.0 3.6 4.0 5.5 40° 68°
TX2.5 One .030 x .029 .031" 100 1.8 2.2 2.5 3.0 3.4 3.7 4.4 5.0 6.8 48° 70°
TX3 One .036 x .034 .034" 100 2.2 2.6 3.0 3.6 4.1 4.5 5.3 6.1 8.2 57° 72°
TX4 One .040 x .034 .041" 50 2.9 3.5 4.0 4.8 5.5 6.1 7.3 8.3 11.4 61° 73°
TX5 Two .032 x .032 .044" 50 3.6 4.4 5.0 6.0 6.9 7.6 9.1 10.4 14.3 63° 73°
TX6 Two .040 x .032 .047" 50 4.4 5.3 6.0 7.2 8.2 9.1 11.0 12.5 17.1 65° 74°
TX8 Two .040 x .036 .055" 50 5.7 7.0 8.0 9.7 11.1 12.4 15.0 17.3 24.0 66° 74°
SCREEN STRAINER TX10 Two .050 x .030 .060" 50 7.2 8.7 10.0 12.1 13.9 15.5 18.8 21.6 30.1 68° 75°
TX12 Two .050 x .034 .067" 50 8.6 10.5 12.0 14.6 16.7 18.6 22.6 25.9 36.1 69° 76°
TX14 Two .055 x .034 .070" 50 9.9 12.1 14.0 17.1 19.7 22.1 27.0 31.1 43.9 70° 76°
TX18 Two .060 x .031 .079" 50 12.8 15.6 18.0 22.0 25.4 28.4 34.7 40.0 56.4 71° 77°
TX22 Two .065 x .030 .086" 50 15.6 19.1 22.0 26.9 31.0 34.7 42.4 48.9 68.9 71° 78°
TX26 Two .065 x .030 .094" 50 18.4 22.5 26.0 31.8 36.7 41.0 50.1 57.8 81.5 72° 78°
*Spray Angle of all above tips is 80° at 100 psi.
CAPACITY
gph (gallons per hour) at SPRAY
Tip No. Inlet Orifice psi (pound per square inch) ANGLE
SPRAY TIP and Openings Screen
Capacity Diam. Mesh
(See Chart) in Inches 10 15 20 30 40 60 80 100 20 40 80
Size
psi psi psi psi psi psi psi psi psi psi psi
T2W Two .016 x .015 .031" 100 1.4 1.7 2.0 2.5 2.8 3.2 130° 140° 136°
T3W Two .020 x .019 .039" 100 1.8 2.1 2.6 3.0 3.7 4.3 4.8 138° 140° 137°
T4W Two .024 x .021 .044" 50 2.5 2.8 3.5 4.0 4.9 5.7 6.3 140° 140° 138°
T5W Two .028 x .027 .050" 50 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 140° 140° 138°
T6W Two .032 x .026 .055" 50 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 140° 140° 138°
T8W Two .036 x .029 .063" 50 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.7 140° 140° 136°
T10W Two .040 x .030 .070" 50 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 140° 140° 136°
T12W Two .044 x .029 .078" 50 6.0 7.3 8.5 11.3 12.0 14.7 17.0 19.0 140° 140° 136°
TIP RETAINER
D
Hollow Cone spray nozzle
disc and core type B
9
T
FEMALE BODY
UNIJET SYSTEM
OR
DESIGN FEATURES
The D series disc and core type They feature a disc and core type
UniJet hollow cone nozzles construction in stainless steel,
provide a finely atomized, brass or tungsten carbide for
uniform spray pattern. This type excellent wear resistance.
of nozzle is often used for Complete nozzle assemblies
spraying materials which contain include a nozzle body and tip
suspended abrasivesÉand also retainer, slotted strainer, core and
engineered to assure accurate orifice disc.
TT spray performance.
MALE BODY
HOLLOW CONE
COMMON APPLICATIONS DIMENSIONS & WEIGHTS
ⓦ Fugitive dust control
Nozzle Max. Max.
ⓦ Gas cooling
SLOTTED STRAINER Type Length Hex Weight
ⓦ Spraying abrasive liquids
1/4T + D 17⁄16) ⁄ )
13 16 21⁄4 oz.
ⓦ Washing gas/air to capture
particulates 1/4TT + D 1⁄)
12 ⁄ )
13 16 2 oz.
ⓦ Applications requiring in-line
CORE hollow cone sprays
(See Chart)
1/4TT + D4 - 25 HSS
Nozzle Orifice Core Core
Body Disc No. Material
No.
TIP RETAINER
SPRAY NOZZLE
“D” TYPE HOLLOW CONE
SPRAY NOZZLE
PERFORMANCE DATA
B Nozzle No.
Orifice Core Orifice
CAPACITY
gpm (gallons per minute) at
psi (pounds per square inch)
SPRAY
ANGLE
10 Disc No. Diam.
10 20 30 40 60 80 100 150 200 300 20 40 80
Type T Type TT No.
Fem. Conn. Male Conn. psi psi psi psi psi psi psi psi psi psi psi psi psi
Q\‰TD1-13 Q\‰TTD1-13 D1 13 .031" .059 .066 .078 .088 .097 .115 .128 .152 51° 62°
Q\‰TD1.5-13 Q\‰TTD1.5-13 D1.5 13 .036" .057 .067 .075 .088 .098 .110 .127 .142 .167 38° 55° 66°
T Q\‰TD2-13 Q\‰TTD2-13 D2 13 .041" .064 .075 .08 .10 .11 .12 .14 .16 .18 49° 67° 72°
Q\‰TD3-13 Q\‰TTD3-13 D3 13 .047" .071 .08 .09 .11 .12 .13 .16 .18 .20 53° 70° 75°
FEMALE BODY
UNIJET SYSTEM
Q\‰TD4-13 Q\‰TTD4-13 D4 13 .063" .070 .09 .11 .12 .14 .16 .17 .20 .23 .27 69° 79° 83°
OR
Q\‰TD1-23 Q\‰TTD1-23 D1 23 .031" .064 .072 .080 .096 .107 .124 .139 .164 47° 58°
Q\‰TD1.5-23 Q\‰TTD1.5-23 D1.5 23 .036" .064 .076 .086 .103 .117 .130 .155 .175 .210 34° 51° 62°
Q\‰TD2-23 Q\‰TTD2-23 D2 23 .041" .078 .092 .10 .13 .14 .16 .19 .21 .25 51° 63° 70°
Q\‰TD3-23 Q\‰TTD3-23 D3 23 .047" .065 .087 .10 .12 .14 .16 .18 .21 .24 .28 58° 69° 75°
Q\‰TD4-23 Q\‰TTD4-23 D4 23 .063" .082 .113 .14 .15 .19 .21 .23 .28 .32 .38 68° 82° 87°
Q\‰TD5-23 Q\‰TTD5-23 D5 23 .078" .095 .13 .16 .18 .22 .25 .28 .34 .38 .46 79° 89° 94°
Q\‰TD6-23 Q\‰TTD6-23 D6 23 .094" .112 .15 .19 .21 .26 .29 .32 .39 .45 .54 84° 93° 98°
Q\‰TD1-25 Q\‰TTD1-25 D1 25 .031" .088 .101 .122 .138 .156 .185 .210 .255 27° 43°
Q\‰TD1.5-25 Q\‰TTD1.5-25 D1.5 25 .036" .118 .135 .162 .185 .205 .245 .280 .33 38° 49°
Q\‰TD2-25 Q\‰TTD2-25 D2 25 .041" .12 .14 .16 .19 .22 .25 .29 .34 .41 39° 51° 58°
Q\‰TD3-25 Q\‰TTD3-25 D3 25 .047" .10 .14 .17 .19 .23 .26 .29 .35 .40 .48 52° 61° 67°
Q\‰TD4-25 Q\‰TTD4-25 D4 25 .063" .15 .21 .25 .29 .35 .40 .45 .54 .62 .75 67° 74° 80°
Q\‰TD5-25 Q\‰TTD5-25 D5 25 .078" .18 .25 .30 .35 .42 .48 .54 .65 .75 .90 73° 79° 84°
Q\‰TD6-25 Q\‰TTD6-25 D6 25 .094" .23 .32 .39 .44 .54 .62 .70 .85 .97 1.19 79° 85° 89°
Q\‰TD7-25 Q\‰TTD7-25 D7 25 .109" .26 .37 .45 .52 .63 .73 .81 .98 1.18 1.37 85° 91° 93°
TT .31 .43 .53 .61 .75 .89 .97 1.19 1.36 91° 96° 97°
Q\‰TD8-25 Q\‰TTD8-25 D8 25 .125" 1.68
MALE BODY Q\‰TD10-25 Q\‰TTD10-25 D10 25 .156" .38 .54 .65 .76 .93 1.07 1.21 1.48 1.71 2.1 97° 102° 103°
Q\‰TD12-25 Q\‰TTD12-25 D12 25 .188" .46 .61 .80 .93 1.15 1.32 1.47 1.81 2.09 2.55 103° 109° 112°
Q\‰TD14-25 Q\‰TTD14-25 D14 25 .219" .51 .72 .88 1.03 1.26 1.47 1.65 2.02 2.34 2.89 108° 113° 114°
HOLLOW CONE
Q\‰TD1-45 Q\‰TTD1-45 D1 45 .031" .125 .148 .170 .190 .225 .257 .310 22° 34°
Q\‰TD1.5-45 Q\‰TTD1.5-45 D1.5 45 .036" .14 .16 .20 .23 .25 .31 .35 .43 33° 44°
Q\‰TD2-45 Q\‰TTD2-45 D2 45 .041" .14 .18 .20 .25 .28 .32 .38 .44 .53 32° 46° 55°
Q\‰TD3-45 Q\‰TTD3-45 D3 45 .047" .17 .20 .23 .28 .33 .36 .44 .51 .62 40° 53° 60°
Q\‰TD4-45 Q\‰TTD4-45 D4 45 .063" .18 .25 .31 .36 .43 .50 .56 .68 .78 .95 62° 69° 72°
Q\‰TD5-45 Q\‰TTD5-45 D5 45 .078" .23 .32 .39 .45 .55 .64 .71 .86 .99 1.22 67° 73° 76°
Q\‰TD6-45 Q\‰TTD6-45 D6 45 .094" .29 .41 .50 .58 .72 .83 .93 1.15 1.33 1.64 73° 79° 81°
SLOTTED STRAINER Q\‰TD7-45 Q\‰TTD7-45 D7 45 .109" .33 .48 .59 .68 .84 .97 1.11 1.35 1.57 1.94 81° 86° 87°
Q\‰TD8-45 Q\‰TTD8-45 D8 45 .125" .41 .59 .72 .84 1.04 1.21 1.35 1.68 1.94 2.40 86° 90° 90°
Q\‰TD10-45 Q\‰TTD10-45 D10 45 .156" .54 .77 .94 1.10 1.35 1.57 1.77 2.18 2.50 3.10 90° 93° 93°
Q\‰TD12-45 Q\‰TTD12-45 D12 45 .188" .67 .95 1.17 1.36 1.68 1.95 2.20 2.69 3.11 3.80 97° 100° 102°
Q\‰TD14-45 Q\‰TTD14-45 D14 45 .219" .75 1.07 1.32 1.53 1.89 2.19 2.45 3.00 3.49 4.30 101° 104° 105°
Q\‰TD16-45 Q\‰TTD16-45 D16 45 .250" .86 1.25 1.54 1.79 2.20 2.57 2.89 3.54 4.11 5.20 108° 111° 112°
Q\‰TD1-46 Q\‰TTD1-46 D1 46 .031" .145 .178 .205 .23 .28 .32 .39 13° 15°
CORE Q\‰TD1.5-46 Q\‰TTD1.5-46 D1.5 46 .036" .213 .260 .300 .33 .41 .46 .56 15° 17°
(See Chart) Q\‰TD2-46 Q\‰TTD2-46 D2 46 .041" .24 .27 .33 .37 .42 .50 .57 .68 18° 21°
Q\‰TD3-46 Q\‰TTD3-46 D3 46 .047" .23 .28 .32 .39 .45 .51 .61 .70 .86 14° 20° 24°
Q\‰TD4-46 Q\‰TTD4-46 D4 46 .063" .28 .39 .48 .56 .68 .78 .88 1.07 1.27 1.52 23° 29° 33°
Q\‰TD5-46 Q\‰TTD5-46 D5 46 .078" .38 .54 .66 .77 .94 1.10 1.25 1.50 1.73 2.13 33° 39° 42°
Q\‰TD6-46 Q\‰TTD6-46 D6 46 .094" .55 .78 .95 1.10 1.35 1.58 1.73 2.16 2.50 3.06 42° 48° 50°
Q\‰TD7-46 Q\‰TTD7-46 D7 46 .109" .98 1.22 1.39 1.72 1.97 2.22 2.73 .315 3.85 48° 53° 56°
Q\‰TD8-46 Q\‰TTD8-46 D8 46 .125" 1.59 1.84 2.25 2.62 2.93 3.60 4.17 5.05 60° 62°
Q\‰TD10-46 Q\‰TTD10-46 D10 46 .156" 2.15 2.48 3.05 3.53 3.96 4.83 5.59 6.8 66° 68°
DISC
(See Chart) Q\‰TD1-56 Q\‰TTD1-56 D1 56 .031" .180 .208 .23 .28 .33 .40 13°
Q\‰TD1.5-56 Q\‰TTD1.5-56 D1.5 56 .036" .262 .302 .33 .41 .47 .57 15°
STRAINER NOTE: For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 13 and 23ÉSlotted
Strainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For all other larger capacity Discs and
CoresÉSlotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied.
TIP RETAINER
SPRAY NOZZLE TIP
FULL CONE (STANDARD SPRAY ANGLE)
TG
Full Cone Spray Nozzle Tip
B
11
T
FEMALE BODY
UNIJET SYSTEM
OR
DESIGN FEATURES
TG series UniJet full cone spray The spray tips feature a solid
tip assemblies feature all the cone-shaped spray pattern with
useful options of the UniJet a round impact area. A unique
System such as interchangeable design results in a uniform spray
nozzle strainers, nozzle check distribution, and superior control
valves and swivel connectors, characteristics.
plus a selection of flow rate
capacities that fills out the low
end of the FullJet¨ nozzle family.
PERFORMANCE DATA
TT
MALE BODY Nozzle Maximum CAPACITY SPRAY
Inlet Orifice Free (gallons per minute) ANGLE
Conn. Capacity Diam. Passage
NPT or Size Nom. Diam.*
5 7 10 20 30 40 60 80 100 150 7 20 80
FULL CONE
BSPT Inches Inches
psi psi psi psi psi psi psi psi psi psi psi psi psi
0.3 .020 .016 .042 .052 .060 .073 .085 .095 .12 50° 61°
0.4 .022 .018 .057 .069 .080 .098 .11 .13 .16 56° 63°
0.5 .024 .020 .071 .087 .10 .12 .14 .16 .19 56° 63°
0.6 .027 .020 .085 .10 .12 .15 .17 .19 .23 54° 62°
0.7 .030 .020 .10 .12 .14 .17 .20 .22 .27 54° 63°
1/4 1 .036 .025 .14 .17 .19 .23 .26 .30 .36 58° 53°
SPRAY TIP 2 .047 .040 .20 .28 .34 .38 .46 .53 .59 .77 50° 46°
(See Chart) 3 .062 .040 .30 .42 .50 .57 .69 .79 .88 1.1 65° 59°
3.5 .067 .050 .35 .48 .58 .67 .81 .92 1.0 1.3 50° 46°
5 .082 .050 .50 .69 .82 .95 1.2 1.3 1.5 1.8 65° 59°
6.5 E\´„ Q\ŒÁ .47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3 45° 50° 46°
10 U\Á‰ Q\ŒÁ .73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6 58° 67° 61°
Material Material Codes *Foreign matter with maximum diameter as listed
Q no material code = Brass can pass through nozzle without clogging.
Q SS = 303 Stainless Steel
TG-SQ
B Full Cone Nozzle Tip
square spray
12
T
FEMALE BODY
UNIJET SYSTEM
OR
DESIGN FEATURES
TG-SQ series UniJet full cone They are well-suited for installa-
spray tips feature a solid cone- tions requiring complete coverage
shaped spray pattern with a of rectangular areas or spray
square impact area. The spray zones. All spray tip assemblies
tips produce a uniform spray of feature all the useful options of
medium to large size droplets the UniJet System plus a wide
across their entire spray area. selection of flow rate capacities.
TT
MALE BODY
PERFORMANCE DATA
FULL CONE
1/4 12SQ Q\ˆ Q\ŒÁ .86 1.0 1.2 1.7 2.0 2.3 2.8 3.2 3.5 4.3 70° 75° 68°
SPRAY TIP 3/8 18SQ T\´„ E\´„ 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.3 6.4 71° 75° 68°
(See Chart) Material Material Code *Foreign matter with maximum diameter as listed
Q no material code = Brass can pass through nozzle without clogging.
Q SS = 303 Stainless Steel
ⓦ Dust control
ⓦ Fire protection
ORDERING INFORMATION
UNIJET
COMPLETE NOZZLE
SPRAY TIP
NOZZLE
BODY + TG - 12SQ
Tip Material Capacity
Type Code Size
SPRAY NOZZLE TIP
FULL CONE (WIDE ANGLE)
STANDARD TYPE
TG-W
Full Cone Nozzle Tip
Wide Angle Spray B
13
T
FEMALE BODY
UNIJET SYSTEM
OR
DESIGN FEATURES
TG-W Wide Angle full cone a round impact area and spray
spray tips produce a uniform angles of 102¡ to 120¡Éproviding
spray of medium to coarse a wide selection of low flow
droplets across their entire spray rates. The uniform spray distribu-
areaÉ giving excellent results in tion results from a unique internal
spraying applications requiring designÉand engineered to
complete coverage. The wide assure accurate and consistent
angle spray tips feature a solid performance.
cone-shaped spray pattern with
TT
MALE BODY
PERFORMANCE DATA
Maximum CAPACITY SPRAY
Nozzle Orifice
FULL CONE
Free (gallons per minute) ANGLE
Inlet Conn. Capacity Diam.
Passage
NPT or Size Nom.
Diam.* 5 7 10 15 20 30 40 60 80 5 10 80
BSPT Inches
Inches psi psi psi psi psi psi psi psi psi psi psi psi
2.8W Q\ŒÁ .040 .28 .33 .38 .45 .51 .61 .70 120° 102°
4.3W T\Á‰ .040 .43 .51 .58 .70 .79 .95 1.1 120° 102°
1/8
SCREEN STRAINER 5.6W E\´„ .040 .48 .56 .67 .76 .91 1.0 1.2 1.4 120° 102°
8W E\´„ .050 .68 .80 .96 1.1 1.3 1.5 1.8 2.0 120° 103°
10W U\Á‰ .050 .74 .86 1.0 1.2 1.4 1.6 1.8 2.2 2.5 112° 120° 103°
1/4 12W Q\ˆ .050 .89 1.0 1.2 1.4 1.6 1.9 2.2 2.6 3.0 114° 120° 103°
14W O\Á‰ Q\ŒÁ 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 114° 120° 103°
Material Material Code *Foreign matter with maximum diameter as listed
Q no material code = Brass can pass through nozzle without clogging.
Q SS = 303 Stainless Steel
COMMON APPLICATIONS
SPRAY TIP
(See Chart) ⓦ Washing & rinsing processes ⓦ Scrubbing, washing and ⓦ Breaking up and deaerating
cooling of flue gases to foam
ⓦ Quenching & cooling of coke,
remove fly ash and other
primary metals and other ⓦ Creating and dispersing
products of combustion
materials droplets in chemical reaction
ⓦ Deluging combustible materials processing
ⓦ Suppression of fugitive dust
and storage tanks for fire
in the processing of bulk ores,
suppression and prevention
coal, limestone, sand and gravel
TIP RETAINER
MESH SELECTION
DIMENSIONS & WEIGHTS ORDERING INFORMATION
GUIDE UNIJET
Equivalent Recommended Nozzle Max. Max. COMPLETE NOZZLE
Orifice Screen Type Length Hex Weight
Diameter Mesh SPRAY TIP
1/4T + TG-W wT\´„" QE\ŒÁ" 3.0 oz. NOZZLE
UP THROUGH
200 BODY + TG - SS 14W
.018" (.46 mm) 1/4TT + TG-W wU\´„" QE\ŒÁ" 2.5 oz.
.019" (.47 mm) Tip Material Capacity
Type Code Size
THROUGH 100
.031" (.79 mm)
.032" (.80 mm)
50
AND LARGER
SPRAY NOZZLE TIP
FULL CONE (WIDE ANGLE)
STANDARD TYPE
TH-W
B Full Cone Nozzle Tip
Wide Angle Spray
14
UNIJET SYSTEM
T
FEMALE BODY
OR DESIGN FEATURES
TH-W Wide Angle full cone The spray tips produce a uniform
spray tips are designed so that spray of medium to coarse
the spray tip serves as tip and dropletsÉfeaturing a solid
tip retainer in one. The spray tip cone-shaped spray pattern with
threads directly into UniJet a round impact area and spray
bodies Uniform spray distribution angles of 102¡ to 120¡. They were
results from a unique internal engineered to assure accurate
design. and consistent performance.
PERFORMANCE DATA
TT
MALE BODY
Maximum CAPACITY SPRAY
FULL CONE
Nozzle Orifice
Free (gallons per minute) ANGLE
Inlet Conn. Capacity Diam. Passage
NPT or Size Nom. Diam.* 5 7 10 15 20 30 40 60 80 5 20 80
BSPT Inches Inches psi psi psi psi psi psi psi psi psi psi psi psi
2.8W Q\ŒÁ .040 .28 .33 .38 .45 .51 .61 .70 120° 102°
4.3W T\Á‰ .040 .43 .51 .58 .70 .79 .95 1.1 120° 102°
1/8
5.6W E\´„ .040 .48 .56 .67 .76 .91 1.0 1.2 1.4 120° 102°
8W E\´„ .050 .68 .80 .96 1.1 1.3 1.5 1.8 2.0 120° 103°
10W U\Á‰ .050 .74 .86 1.0 1.2 1.4 1.6 1.8 2.2 2.5 112° 120° 103°
1/4
14W O\Á‰ Q\ŒÁ 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 114° 120° 103°
17W T\´„ Q\ŒÁ 1.3 1.5 1.7 2.0 2.3 2.8 3.1 3.7 4.2 114° 120° 103°
20W QQ\Á‰ E\´„ 1.5 1.7 2.0 2.4 2.7 3.2 3.7 4.4 5.0 114° 120° 104°
3/8
24W E\ŒÁ E\´„ 1.8 2.1 2.4 2.9 3.3 3.9 4.4 5.3 6.0 114° 120° 104°
27W QE\Á‰ U\Á‰ 2.0 2.3 2.7 3.2 3.7 4.4 5.0 5.9 6.7 114° 120° 106°
30W U\´„ U\Á‰ 2.2 2.6 3.0 3.6 4.1 4.9 5.5 6.6 7.5 114° 120° 108°
1/2
35W QT\Á‰ Q\ˆ 2.6 3.0 3.5 4.2 4.8 5.7 6.4 7.7 8.7 114° 120° 108°
Material Material Code *Foreign matter with maximum diameter as listed
SPRAY TIP Q SS = 303 Stainless Steel can pass through nozzle without clogging.
AND RETAINER
(See Chart)
COMMON APPLICATIONS ORDERING INFORMATION
ⓦ Washing & rinsing processes ores, coal, limestone, sand UNIJET
and gravel COMPLETE NOZZLE
ⓦ Quenching & cooling of coke,
primary metals and other ⓦ Scrubbing, washing and SPRAY TIP
materials cooling of flue gases to NOZZLE
remove fly ash and other
BODY + TH - SS 10W
ⓦ Suppression of fugitive dust
products of combustion Tip Material Capacity
in the processing of bulk
Type Code Size
UNIJET SYSTEM
OR Complete nozzle assemblies
include a nozzle body and tip
retainer, slotted strainer, core
and orifice disc.
PERFORMANCE DATA
CAPACITY
gpm (gallons per minute) at SPRAY
Nozzle No. Orifice Core Orifice ANGLE
psi (pounds per square inch)
Disc No. Diam.
Type T Type TT No. 10 20 30 40 60 80 100 150 200 300 20 40 80
Fem. Conn. Male Conn. psi psi psi psi psi psi psi psi psi psi psi psi psi
Q\‰TD1-31 Q\‰TTD1-31 D1 31 .031" .08 .11 .13 .15 .18 .20 .23 .27 .31 .37 49° 47° 43°
Q\‰TD1.5-31 Q\‰TTD1.5-31 D1.5 31 .036" .10 .14 .17 .19 .23 .26 .29 .35 .40 .48 57° 65° 53°
TT Q\‰TD2-31 Q\‰TTD2-31 D2 31 .041" .12 .16 .19 .22 .26 .30 .33 .40 .45 .55 62° 63° 61°
MALE BODY Q\‰TD3-31 Q\‰TTD3-31 D3 31 .047" .13 .18 .21 .24 .29 .33 .37 .44 .50 .60 63° 65° 63°
Q\‰TD1-33 Q\‰TTD1-33 D1 33 .031" .09 .11 .12 .14 .17 .20 .22 .26 .30 .37 27° 32° 35°
Q\‰TD1.5-33 Q\‰TTD1.5-33 D1.5 33 .036" .12 .15 .17 .19 .23 .26 .30 .36 .41 .50 37° 43° 45°
FULL CONE
Q\‰TD2-33 Q\‰TTD2-33 D2 33 .041" .13 .17 .21 .24 .29 .33 .37 .45 .52 .63 45° 52° 55°
Q\‰TD3-33 Q\‰TTD3-33 D3 33 .047" .15 .21 .25 .29 .36 .41 .45 .55 .63 .76 48° 54° 57°
Q\‰TD4-33 Q\‰TTD4-33 D4 33 .063" .20 .28 .34 .39 .47 .54 .60 .73 .83 1.02 50° 56° 61°
Q\‰TD1-35 Q\‰TTD1-35 D1 35 .031" .08 .11 .13 .14 .17 .20 .22 .26 .29 .35 19° 23° 26°
Q\‰TD1.5-35 Q\‰TTD1.5-35 D1.5 35 .036" .10 .14 .17 .19 .23 .26 .29 .34 .39 .46 23° 27° 29°
Q\‰TD2-35 Q\‰TTD2-35 D2 35 .041" .14 .18 .24 .25 .30 .34 .37 .45 .51 .60 40° 44° 47°
Q\‰TD3-35 Q\‰TTD3-35 D3 35 .047" .16 .22 .26 .30 .36 .41 .45 .55 .62 .74 45° 50° 52°
SLOTTED STRAINER Q\‰TD4-35 Q\‰TTD4-35 D4 35 .063" .27 .37 .44 .50 .60 .70 .79 .93 1.1 1.3 68° 70° 71°
Q\‰TD5-35 Q\‰TTD5-35 D5 35 .078" .34 .48 .58 .66 .80 .92 1.0 1.2 1.4 1.7 67° 69° 71°
Q\‰TD2-56 Q\‰TTD2-56 D2 56 .041" .21 .25 .30 .35 .39 .47 .55 .67 14° 17°
Q\‰TD3-56 Q\‰TTD3-56 D3 56 .047" .29 .34 .41 .48 .53 .65 .75 .92 20° 23°
Q\‰TD4-56 Q\‰TTD4-56 D4 56 .063" .39 .48 .55 .67 .78 .87 1.06 1.23 1.51 20° 26° 29°
Q\‰TD5-56 Q\‰TTD5-56 D5 56 .078" .38 .54 .66 .76 .93 1.08 1.20 1.47 1.69 2.08 26° 32° 34°
CORE Q\‰TD6-56 Q\‰TTD6-56 D6 56 .094" .55 .78 .95 1.10 1.35 1.55 1.74 2.13 2.46 3.02 34° 39° 41°
Q\‰TD7-56 Q\‰TTD7-56 D7 56 .109" .76 1.07 1.32 1.52 1.86 2.15 2.40 2.94 3.40 4.16 45° 52° 54°
(See Chart) Q\‰TD8-56 Q\‰TTD8-56 D8 56 .125" .96 1.36 1.67 1.93 2.36 2.73 3.05 3.73 4.32 5.28 52° 57° 59°
Q\‰TD10-56 Q\‰TTD10-56 D10 56 .156" 1.35 1.91 2.34 2.70 3.31 3.82 4.26 5.22 6.03 7.39 62° 65° 67°
STRAINER NOTE: For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or core
Nos. 31 and 33ÉSlotted Strainer No. 4514-20 equivalent to 25 mesh screen
size is supplied. For all other larger capacity Discs and CoresÉSlotted
Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied.
DISC
(See Chart)
DIMENSIONS & WEIGHTS ORDERING INFORMATION
UNIJET
Nozzle Max. Max. COMPLETE NOZZLE
Type Length Hex Weight
ORIFICE
DISC & CORE
1/4T + D 1U\ŒÁ" QE\ŒÁ" 21⁄4 oz. NOZZLE
1/4TT + D 1Q\„" QE\ŒÁ" 2 oz.
BODY + D2 - 56 HSS
Orifice Core Core
TIP RETAINER Disc No. Material
No.
COMMON APPLICATIONS
ⓦ Spraying wettable powders
and abrasive liquids
ⓦ Dust supression in processing
coal, ores, gravel
ⓦ Scrubbing and washing of gases
SPRAY NOZZLE TIP
FLAT SPRAY
(STANDARD TYPE)
TP
B
16
DESIGN FEATURES
T
FEMALE BODY TP flat spray tips feature a high All TP spray tips are precision
UNIJET SYSTEM
TT
MALE BODY
ⓦ Pressure cleaning
ⓦ Sand, coal and gravel
washing
PERFORMANCE DATA
Spray
Angle Capacity
Equiv.
Orifice
CAPACITY
(gallons per minute)
SPRAY
ANGLE
B
at Size Diam.
5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
17
40 psi Inches
psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
11001 .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 94° 110° 121° 124°
110015 .031 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 97° 110° 121° 124°
T 11002 .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 98° 110° 120° 123°
FEMALE BODY 11003 .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 99° 110° 120° 123°
UNIJET SYSTEM
11004 .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 100° 110° 119° 122°
OR .18 .25 .35 .43
110° 11005 .057 .50 .61 .71 .79 1.1 1.4 1.8 100° 110° 118° 122°
11006 .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 101° 110° 117° 122°
11008 .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 102° 110° 117° 121°
11010 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 103° 110° 117° 119°
11015 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 104° 110° 117° 118°
11020 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 105° 110° 117° 118°
11030 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 105° 110° 117° 118°
9501 .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 81° 95° 105° 113°
95015 .031 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 82° 95° 105° 113°
9502 .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 82° 95° 105° 113°
9503 .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 83° 95° 104° 111°
9504 .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 84° 95° 103° 108°
9505 .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 84° 95° 102° 107°
9506 .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 86° 95° 101° 106°
TT 95° 9508 .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 87° 95° 100° 105°
MALE BODY 9510 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 89° 95° 100° 105°
9515 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 90° 95° 100° 105°
9520 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 90° 95° 100° 105°
9530 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 91° 95° 101° 105°
9540 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 92° 95° 100° 105°
FLAT SPRAY
9550 QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 93° 95° 99° 103°
9560 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 93° 95° 99° 103°
9570 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 93° 95° 99° 103°
800050 .018 .035 .043 .050 .06 .07 .08 .11 .14 .18 61° 80° 95° 101°
800067 .021 .03 .05 .06 .067 .08 .09 .11 .15 .18 .24 67° 80° 94° 99°
8001 .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 68° 80° 89° 92°
80015 .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 68° 80° 89° 92°
SCREEN STRAINER .07 .10 .14
8002 .036 .17 .20 .25 .28 .32 .45 .55 .71 69° 80° 88° 91°
8003 .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 70° 80° 87° 90°
8004 .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 71° 80° 86° 89°
8005 .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 71° 80° 86° 89°
80° 8006 .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 72° 80° 85° 88°
8008 .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 72° 80° 84° 87°
8010 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 73° 80° 84° 87°
8015 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 74° 80° 83° 86°
8020 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 74° 80° 83° 86°
8030 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 74° 80° 83° 86°
SPRAY TIP 8040 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 74° 80° 83° 86°
(See Chart) 8050 QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 74° 80° 83° 85°
8060 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 75° 80° 83° 85°
8070 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 75° 80° 83° 86°
730023 .012 .016 .020 .023 .028 .032 .036 .051 .063 .081 50° 73° 89° 97°
730039 .016 .020 .028 .034 .039 .048 .055 .062 .087 .11 .14 53° 73° 87° 93°
730077 .022 .039 .055 .067 .077 .09 .11 .12 .17 .21 .27 53° 73° 86° 92°
730116 .028 .04 .06 .08 .10 .116 .14 .16 .18 .26 .32 .41 54° 73° 85° 90°
730154 .032 .05 .08 .11 .13 .154 .19 .22 .24 .34 .42 .54 55° 73° 84° 88°
73° 730231 .040 .08 .12 .16 .20 .231 .28 .33 .37 .52 .63 .82 56° 73° 83° 87°
730308 .045 .11 .15 .22 .27 .308 .38 .44 .49 .69 .84 1.1 58° 73° 82° 86°
730385 .051 .14 .19 .27 .33 .385 .47 .54 .61 .86 1.1 1.4 59° 73° 81° 85°
730462 .056 .16 .23 .33 .40 .462 .57 .65 .73 1.0 1.3 1.6 60° 73° 80° 84°
TIP RETAINER .22 .31 .44
730616 .065 .53 .616 .75 .87 .98 1.4 1.7 2.2 63° 73° 79° 83°
730770 .072 .27 .38 .54 .67 .770 .94 1.1 1.2 1.7 2.1 2.7 64° 73° 77° 82°
730924 .078 .33 .46 .65 .80 .924 1.1 1.3 1.5 2.1 2.5 3.3 65° 73° 77° 80°
MESH SELECTION
GUIDE 650017 .011 .012 .015 .017 .021 .024 .027 .038 .047 .06 44° 65° 77° 86°
650025 .013 .018 .022 .025 .031 .035 .040 .06 .07 .09 45° 65° 77° 84°
Equivalent Recommended .023 .029 .033 47° 65°
650033 .015 .040 .047 .052 .07 .09 .12 76° 83°
Orifice Screen .035 .043 .050 48° 65°
650050 .018 .060 .07 .08 .11 .14 .18 75° 82°
Diameter Mesh .03 .05 .06 .067 50° 65°
650067 .021 .08 .09 .11 .15 .18 .24 75° 81°
UP THROUGH 6501 .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 51° 65° 74° 80°
200 65° 65015 .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 51° 65° 74° 80°
.018" (.46 mm)
6502 .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 52° 65° 73° 79°
.019" (.47 mm) 6503 .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 53° 65° 72° 78°
THROUGH 100 6504 .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 53° 65° 72° 76°
.031" (.79 mm) 6505 .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 53° 65° 72° 76°
.032" (.80 mm) 6506 .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 54° 65° 72° 75°
50 .28 .40 .56 .69 .80 55° 65°
AND LARGER 6508 .072 .98 1.1 1.3 1.8 2.2 2.8 71° 74°
SPRAY NOZZLE TIP
FLAT SPRAY
PERFORMANCE DATA
B Spray
Capacity
Equiv.
Orifice
CAPACITY
(gallons per minute)
SPRAY
ANGLE
18 Angle at
40 psi Size Diam.
5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
Inches
psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
6510 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 56° 65° 71° 74°
6515 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 56° 65° 70° 73°
T 6520 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 57° 65° 70° 73°
FEMALE BODY 65° 6530 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 58° 65° 69° 72°
UNIJET SYSTEM
6540 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 59° 65° 68° 72°
OR 1.8 2.5 3.5 4.3 5.0
6550 QQ\Á‰ 6.1 7.1 7.9 11.2 13.7 17.7 60° 65° 68° 71°
6560 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 60° 65° 68° 71°
6570 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 60° 65° 68° 71°
500017 .011 .012 .015 .017 .021 .024 .027 .038 .047 .06 27° 50° 65° 74°
500025 .013 .018 .022 .025 .031 .035 .040 .06 .07 .09 29° 50° 64° 71°
500033 .015 .023 .029 .033 .040 .047 .052 .07 .09 .12 30° 50° 62° 68°
500050 .018 .035 .043 .050 .06 .07 .08 .11 .14 .18 32° 50° 60° 66°
500067 .021 .05 .06 .067 .08 .09 .11 .15 .18 .24 35° 50° 60° 66°
5001 .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 37° 50° 59° 65°
50015 .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 38° 50° 58° 64°
5002 .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 39° 50° 57° 63°
5003 .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 40° 50° 56° 62°
50° 5004 .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 42° 50° 56° 61°
5005 .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 44° 50° 56° 61°
TT 5006 .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 45° 50° 56° 60°
MALE BODY 5008 .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 45° 50° 55° 60°
5010 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 45° 50° 55° 59°
5015 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 45° 50° 55° 59°
5020 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 45° 50° 55° 59°
5030 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 45° 50° 55° 59°
FLAT SPRAY
5040 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 46° 50° 54° 59°
5050 QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 46° 50° 54° 59°
5060 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 46° 50° 54° 59°
5070 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 46° 50° 54° 59°
400017 .011 .012 .015 .017 .021 .024 .027 .038 .047 .06 21° 40° 54° 61°
400025 .013 .018 .022 .025 .031 .035 .040 .06 .07 .09 22° 40° 53° 60°
400033 .015 .023 .029 .033 .040 .047 .052 .07 .09 .12 22° 40° 53° 60°
SCREEN STRAINER .035 .043
400050 .018 .050 .06 .07 .08 .11 .14 .18 22° 40° 53° 60°
400067 .021 .05 .06 .067 .08 .09 .11 .15 .18 .24 24° 40° 53° 60°
4001 .026 .07 .09 .10 .12 .14 .16 .22 .27 .35 26° 40° 52° 59°
40015 .031 .11 .13 .15 .18 .21 .24 .34 .41 .53 27° 40° 52° 59°
4002 .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 29° 40° 51° 58°
4003 .043 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 30° 40° 50° 57°
40° 4004 .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 30° 40° 50° 56°
4005 .057 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 31° 40° 49° 55°
4006 .062 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 31° 40° 49° 55°
4008 .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 31° 40° 47° 53°
SPRAY TIP 4010 T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 32° 40° 45° 48°
(See Chart) 4015 E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 32° 40° 45° 48°
4020 U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 32° 40° 45° 48°
4030 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 33° 40° 45° 48°
4040 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 34° 40° 45° 48°
4050 QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 35° 40° 45° 48°
4060 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 35° 40° 45° 48°
4070 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 35° 40° 45° 48°
250017 .011 .015 .017 .021 .024 .027 .038 .047 .06 25° 35° 47°
250025 .013 .022 .025 .031 .035 .040 .06 .07 .09 25° 35° 45°
250033 .015 .029 .033 .040 .047 .052 .07 .09 .12 25° 34° 44°
250050 .018 .043 .050 .06 .07 .08 .11 .14 .18 25° 34° 43°
250067 .021 .06 .067 .08 .09 .11 .15 .18 .24 25° 34° 42°
TIP RETAINER .07 .09
25° 2501 .026 .10 .12 .14 .16 .22 .27 .35 14° 25° 34° 42°
25015 .031 .11 .13 .15 .18 .21 .24 .34 .41 .53 15° 25° 34° 41°
2502 .036 .14 .17 .20 .25 .28 .32 .45 .55 .71 15° 25° 33° 40°
2503 .043 .21 .26 .30 .37 .42 .47 .67 .82 1.1 15° 25° 33° 40°
MESH SELECTION 2504 .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 16° 25° 32° 39°
GUIDE 2505 .057 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 16° 25° 32° 39°
Equivalent Recommended 2506 .062 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 17° 25° 31° 38°
Orifice Screen Material Material Code
Diameter Mesh
Q no material code = Brass
UP THROUGH Q SS = 303 Stainless Steel
200
.018" (.46 mm)
.019" (.47 mm)
THROUGH 100
.031" (.79 mm)
.032" (.80 mm)
50
AND LARGER
SPRAY NOZZLE TIP
FLAT SPRAY
PERFORMANCE DATA
Spray Equiv.
Angle Capacity Orifice
CAPACITY
(gallons per minute)
SPRAY
ANGLE
B
at Size Diam. 5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
19
40 psi Inches psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
2508 .072 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 17° 25° 31° 38°
2510 T\Á‰ .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 18° 25° 31° 37°
T 2515 E\´„ .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 18° 25° 31° 37°
FEMALE BODY 2520 U\Á‰ 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 19° 25° 31° 37°
UNIJET SYSTEM
25° 2530 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 20° 25° 30° 36°
OR 1.4 2.0 2.8 3.5 4.0 4.9 21° 25°
2540 T\´„ 5.7 6.3 8.9 11.0 14.2 29° 35°
2550 QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 21° 25° 29° 35°
2560 E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 22° 25° 29° 35°
2570 QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 22° 25° 29° 35°
150017 .011 .015 017 .021 .024 .027 .038 .047 .06 15° 30° 37°
150025 .013 .022 .025 .031 .035 .040 .06 .07 .09 15° 28° 34°
150033 .015 .029 .033 .040 .047 .052 .07 .09 .12 15° 27° 32°
150050 .018 .043 .050 .06 .07 .08 .11 .14 .18 15° 26° 30°
150067 .021 .06 .067 .08 .09 .11 .15 .18 .24 15° 25° 29°
1501 .026 .09 .10 .12 .14 .16 .22 .27 .35 15° 24° 28°
15015 .031 .13 .15 .18 .21 .24 .34 .41 .53 15° 23° 27°
1502 .036 .14 .17 .20 .25 .28 .32 .45 .55 .71 6° 15° 22° 27°
1503 .043 .21 .26 .30 .37 .42 .47 .67 .82 1.1 6° 15° 22° 27°
15° 1504 .052 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 7° 15° 21° 26°
TT 1505 .057 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 7° 15° 21° 26°
MALE BODY 1506 .062 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 8° 15° 21° 26°
1508 .072 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 9° 15° 20° 25°
1510 T\Á‰ .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 10° 15° 19° 24°
1515 E\´„ .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 10° 15° 19° 24°
1520 U\Á‰ 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 10° 15° 19° 23°
FLAT SPRAY
1530 O\Á‰ 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 10° 15° 19° 21°
1540 T\´„ 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 10° 15° 18° 21°
1550 QQ\Á‰ 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 11° 15° 18° 21°
1560 E\ŒÁ 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 11° 15° 18° 21°
1570 QE\Á‰ 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 11° 15° 18° 21°
000009 .008 .003 .005 .006 .008 .009 .011 .013 .014 .020 .025 .032
000012 .010 .004 .006 .008 .01 .012 .015 .017 .019 .027 .033 .042
SCREEN STRAINER .007 .009 .013 .016 .019
000019 .012 .023 .027 .03 .043 .052 .067
000021 .0135 .007 .01 .015 .018 .021 .026 .03 .033 .047 .058 .074
000050 .020 .018 .025 .035 .043 .050 .06 .07 .08 .11 .14 .18
000067 .023 .024 .033 .05 .06 .067 .08 .09 .11 .15 .18 .24
0001 .028 .035 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35
00015 .033 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53
0002 .039 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 0°
0° 0003 .047 .10 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 SOLID STREAM
0004 .055 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4
0005 .061 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8
SPRAY TIP 0006 .067 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1
(See Chart) 0008 .078 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8
0010 .086 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5
0015 .107 .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3
0020 .125 .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1
0030 O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6
0040 T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 9.0 11.0 14.2
Material Material Code
Q no material code = Brass
Q SS = 303 Stainless Steel
TIP RETAINER
Precision-machined deflector
OR provides accurate control of
spray angle. TK spray tips are
compatible with standard UniJet
AIR AND STEAM nozzle bodies.
COVERAGE
CAPACITY—in scfm CAPACITY—
Orifice at 6"
(standard cubic feet for STEAM
Capacity Diam. per minute) (pounds per hour)
Distance
Size Nom. from Nozzle
Inches
10 20 40 50 10 20 40 50 10 50
psi psi psi psi psi psi psi psi psi psi
.50 .024 .16 .22 .35 .41 .35 .49 .78 .92 2" 5"
TT .75 .028 .22 .31 .50 .59 .50 .70 1.1 1.3 2Q\„" 5Q\„"
MALE BODY 1 .033 .34 .48 .75 .89 .76 1.1 1.7 2.0 3" 6"
1.5 .041 .54 .75 1.2 1.4 1.2 1.7 2.7 3.2 3Q\„" 6Q\„"
COMMON APPLICATIONS 2 .046 .68 .95 1.5 1.8 1.5 2.1 3.4 4.0 4" 7Q\„"
2.5 .052 .94 1.3 2.1 2.5 2.1 2.9 4.7 5.6 4" 7Q\„"
ⓦ Spraying eliminator plates 3 .057 1.1 1.6 2.5 3.0 2.5 3.6 5.7 6.7 5" 8"
FLAT SPRAY
ⓦ Cooling conveyor belts 4 .065 1.4 2.0 3.0 3.8 3.1 4.5 6.8 8.6 5" 9"
5 .073 1.9 2.6 4.2 4.9 4.2 5.9 9.3 11.0 6" 10Q\„"
ⓦ Film washing 7.5 .091 2.8 4.0 6.3 7.5 6.4 8.9 14.2 16.8 6" 10Q\„"
10 .104 3.9 5.5 8.6 10.2 8.7 12.2 19.3 22.9 7" 11"
ⓦ Water curtain
15 .129 6.4 9.0 14.3 16.8 14.3 20.2 31.9 37.7 7" 12"
ⓦ Spray cooling 20 .148 7.9 11.2 17.7 20.9 17.7 25.0 39.5 46.7 8Q\„" 14Q\„"
30 .180 11.4 16.0 25.4 30.0 25.5 35.7 56.9 67.2 8Q\„" 15Q\„"
SCREEN STRAINER ⓦ Fire protection
LIQUID DATA
CAPACITY SPRAY
Orifice
(gallons per minute) ANGLE
Capacity Diam.
Size Nom.
3 5 7 10 15 20 30 40 60 7 20 60
Inches
psi psi psi psi psi psi psi psi psi psi psi psi
HIGH PRESSURE
UNIJET SYSTEM
UNIJET FEMALE BODY
DESIGN FEATURES
EG WashJet spray tips produce for spray alignment. The orifice
a uniform spray distribution of is also recessed to protect
medium-sized droplets. The against damage. EG spray tips
GASKET
spray tip orifice is precision- are designed to be used with
machined to accurately control high pressure 11430 UniJet
flow rates. Milled flats on the nozzle bodies. These high
spray tip are parallel to the plane pressure WashJet spray tips
of the spray pattern, providing a feature a high impact solid
quick visual reference stream or a flat spray pattern
with spray angles of 0¡ to 65¡.
SCREEN STRAINER
PERFORMANCE DATA
FLAT SPRAY
WASHJET SPRAY TIPS CAPACITY
Spray Angle at 40 psi (gallons per minute)
Capacity
00° Size 300 400 500 600 700 800 1000 1500 2000 2500 3000
(Solid 15° 25° 40° 50° 65°
Stream) psi psi psi psi psi psi psi psi psi psi psi
TIP GASKET ⓦ 015 .41 .47 .53 .58 .63 .67 .75 .92 1.1 1.2 1.3
ⓦ 02 .55 .63 .71 .77 .84 .89 1.0 1.2 1.4 1.6 1.7
ⓦ ⓦ ⓦ 03 .82 .95 1.1 1.2 1.3 1.4 1.5 1.8 2.1 2.4 2.6
ⓦ ⓦ ⓦ ⓦ ⓦ 04 1.1 1.3 1.4 1.6 1.7 1.8 2.0 2.5 2.8 3.2 3.5
ⓦ ⓦ ⓦ ⓦ 045 1.2 1.4 1.6 1.7 1.9 2.0 2.3 2.8 3.2 3.6 3.9
ⓦ ⓦ ⓦ ⓦ 05 1.4 1.6 1.8 1.9 2.1 2.2 2.5 3.1 3.5 4.0 4.3
ⓦ ⓦ ⓦ ⓦ 055 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.4 3.9 4.3 4.8
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 06 1.6 1.9 2.1 2.3 2.5 2.7 3.0 3.7 4.2 4.7 5.2
ⓦ ⓦ 065 1.8 2.1 2.3 2.5 2.7 2.9 3.3 4.0 4.6 5.1 5.6
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 07 1.9 2.2 2.5 2.7 2.9 3.1 3.5 4.3 4.9 5.5 6.1
ⓦ ⓦ ⓦ ⓦ ⓦ 08 2.2 2.5 2.8 3.1 3.4 3.6 4.0 4.9 5.7 6.3 6.9
SPRAY TIP ⓦ ⓦ ⓦ ⓦ ⓦ 09 2.5 2.9 3.2 3.5 3.8 4.0 4.5 5.5 6.4 7.1 7.8
ⓦ ⓦ ⓦ ⓦ ⓦ 10 2.7 3.2 3.5 3.9 4.2 4.5 5.0 6.1 7.1 7.9 8.7
(See Chart) ⓦ 3.3
12 3.8 4.2 4.6 5.0 5.4 6.0 7.3 8.5 9.5 10.4
ⓦ ⓦ ⓦ 13 3.6 4.1 4.6 5.0 5.4 5.8 6.5 8.0 9.2 10.3 11.3
ⓦ ⓦ ⓦ 15 4.1 4.7 5.3 5.8 6.3 6.7 7.5 9.2 10.6 11.9 13.0
B TO BE USED WITH
TYPE “TC” HIGH PRESSURE
FLAT SPRAY TIP
Tungsten carbide orifice
UniJet flat spray tip
maximum erosion resistance.
The tip orifice insert is recessed
in a solid stainless steel tip body
22
to protect against damage.
TC tips provide a high impact flat
spray pattern with spray angles of
5¡ to 110¡.They produce a uniform
spray distribution of small-sized
UNIJET SYSTEM
1100039-TC .016 .14 .20 .24 .28 18" 9509-TC .076 3.2 4.5 5.5 6.4 23"
1100050-TC .018 .18 .25 .30 .36 19" 9510-TC .078 3.5 5.0 6.1 7.1 23"
1100067-TC .021 .24 .33 .41 .47 21" 9511-TC .085 3.9 5.5 6.7 7.8 23"
SCREEN STRAINER
1100080-TC .023 .28 .40 .49 .57 22" 9512-TC .089 4.3 6.0 7.4 8.5 23"
11001-TC .026 .35 .50 .61 .72 23" 9515-TC .099 5.3 7.5 9.2 10.6 23"
110015-TC .031 .53 .75 .91 1.1 25" 800011-TC .009 .039 .055 .067 .078 10Q\„"
11002-TC .036 .71 1.0 1.2 1.4 26" 800017-TC .011 .06 .08 .10 .12 11Q\„"
11003-TC .043 1.1 1.5 1.8 2.1 27" 800025-TC .013 .09 .12 .15 .18 12Q\„"
11004-TC .052 1.4 2.0 2.5 2.8 28" 800033-TC .015 .12 .16 .20 .23 13"
TIP GASKET 11005-TC .057 1.8 2.5 3.1 3.5 28" 800039-TC .016 .14 .20 .24 .28 14"
11006-TC .062 2.1 3.0 3.7 4.2 28" 800050-TC .018 .18 .25 .30 .36 15"
11007-TC .067 2.5 3.5 4.3 5.0 28" 800067-TC .021 .24 .33 .41 .47 17"
11008-TC .072 2.8 4.0 4.9 5.7 28" 800080-TC .023 .28 .40 .49 .57 17"
11009-TC .076 3.2 4.5 5.5 6.4 28" 8001-TC .026 .35 .50 .61 .72 19"
11010-TC .078 3.5 5.0 6.1 7.1 28" 80015-TC .031 .53 .75 .91 1.1 19"
11012-TC .089 4.3 6.0 7.4 8.5 28" 8002-TC .036 .71 1.0 1.2 1.4 19"
950017-TC .011 .06 .08 .10 .12 13" 8003-TC .043 1.1 1.5 1.8 2.1 19"
950025-TC .013 .09 .12 .15 .18 14" 8004-TC .052 1.4 2.0 2.5 2.8 19"
SPRAY TIP
950033-TC .015 .12 .16 .20 .23 15" 8005-TC .057 1.8 2.5 3.1 3.5 19"
(See Chart) 950039-TC .016 .14 .20 .24 .28 16" 8006-TC .062 2.1 3.0 3.7 4.2 19"
950050-TC .018 .18 .25 .30 .36 17" 8007-TC .067 2.5 3.5 4.3 5.0 19"
950067-TC .021 .24 .33 .41 .47 19" 8008-TC .072 2.8 4.0 4.9 5.7 19"
950080-TC .023 .28 .40 .49 .57 19" 8009-TC .076 3.2 4.5 5.5 6.4 19"
9501-TC .026 .35 .50 .61 .72 21" 8010-TC .078 3.5 5.0 6.1 7.1 19"
95015-TC .031 .53 .75 .91 1.1 21" 8011-TC .085 3.9 5.5 6.7 7.8 19"
9502-TC .036 .71 1.0 1.2 1.4 22" 8012-TC .089 4.3 6.0 7.4 8.5 19"
9503-TC .043 1.1 1.5 1.8 2.1 22" 8013-TC .093 4.6 6.5 8.0 9.2 19"
9504-TC .052 1.4 2.0 2.5 2.8 23" 8014-TC .096 4.9 7.0 8.6 9.9 19"
9505-TC .057 1.8 2.5 3.1 3.5 23" 8015-TC .099 5.3 7.5 9.2 10.6 19"
9506-TC .062 2.1 3.0 3.7 4.2 23" 730023-TC .012 .08 .11 .14 .16 11Q\„"
HIGH PRESSURE
730039-TC .016 .14 .20 .24 .28 13"
TIP RETAINER
UP THROUGH
200
11430-1/4 - SS 100
.018" (.46 mm) 11430 - Q\‰ + TC 2Q\´„" QE\ŒÁ" 2.5 oz.
Nozzle Connection Material Strainer
.019" (.47 mm) Body Size Code Screen
THROUGH 100 Mesh
.031" (.79 mm) Size
UNIJET SYSTEM
650033-TC .015 .12 .16 .20 .23 11" 250017-TC .011 .06 .08 .10 .12 6"
650039-TC .016 .14 .20 .24 .28 12" 250025-TC .013 .09 .12 .15 .18 6"
650044-TC .017 .16 .22 .27 .31 12Q\„" 250033-TC .015 .12 .16 .20 .23 7"
650050-TC .018 .18 .25 .30 .36 13" 250039-TC .016 .14 .20 .24 .28 7"
650055-TC .019 .19 .28 .34 .39 13" 250050-TC .018 .18 .25 .30 .36 7"
HIGH PRESSURE 650067-TC .021 .24 .33 .41 .47 15" 250055-TC .019 .19 .28 .34 .39 7"
UNIJET FEMALE BODY 650080-TC .023 .28 .40 .49 .57 15" 250067-TC .021 .24 .33 .41 .47 8"
6501-TC .026 .35 .50 .61 .72 16" 250080-TC .023 .28 .40 .49 .57 8Q\„"
65015-TC .031 .53 .75 .91 1.1 16" 2501-TC .026 .35 .50 .61 .72 9"
6502-TC .036 .71 1.0 1.2 1.4 16" 25015-TC .031 .53 .75 .91 1.1 9"
6503-TC .043 1.1 1.5 1.8 2.1 16" 2502-TC .036 .71 1.0 1.2 1.4 9"
6504-TC .052 1.4 2.0 2.5 2.8 16" 2503-TC .043 1.1 1.5 1.8 2.1 9"
GASKET 6505-TC .057 1.8 2.5 3.1 3.5 16" 2504-TC .052 1.4 2.0 2.5 2.8 9"
6506-TC .062 2.1 3.0 3.7 4.2 16" 2506-TC .062 2.1 3.0 3.7 4.2 9"
6507-TC .067 2.5 3.5 4.3 5.0 16" 2508-TC .072 2.8 4.0 4.9 5.7 9"
6508-TC .072 2.8 4.0 4.9 5.7 16" 150004-TC .005 .014 .020 .025 .028 4"
6509-TC .076 3.2 4.5 5.5 6.4 16" 150006-TC .006 .021 .030 .037 .042 4"
6510-TC .078 3.5 5.0 6.1 7.1 16" 150008-TC .007 .028 .040 .049 .057 4Q\„"
6511-TC .085 3.9 5.5 6.7 7.8 16" 150011-TC .009 .039 .055 .067 .078 4Q\„"
6512-TC .089 4.3 6.0 7.4 8.5 16" 150017-TC .011 .06 .08 .10 .12 5"
6513-TC .093 4.6 6.5 8.0 9.2 16" 150025-TC .013 .09 .12 .15 .18 5"
FLAT SPRAY
6514-TC .096 4.9 7.0 8.6 9.9 16" 150033-TC .015 .12 .16 .20 .23 5Q\„"
6515-TC .099 5.3 7.5 9.2 10.6 16" 150039-TC .016 .14 .20 .24 .28 6"
SCREEN STRAINER 500008-TC .007 .028 .04 .049 .057 7E\‰" 150044-TC .017 .16 .22 .27 .31 6"
500011-TC .009 .039 .055 .067 .078 8" 150050-TC .018 .18 .25 .30 .36 6"
500017-TC .011 .06 .08 .10 .12 8Q\„" 150067-TC .021 .24 .33 .41 .47 6Q\„"
500025-TC .013 .09 .12 .15 .18 9" 150080-TC .023 .28 .40 .49 .57 7"
500033-TC .015 .12 .16 .20 .23 10" 1501-TC .026 .35 .50 .61 .72 7"
500039-TC .016 .14 .20 .24 .28 10Q\„" 15015-TC .031 .53 .75 .91 1.1 7"
500044-TC .017 .16 .22 .27 .31 10Q\„" 1502-TC .036 .71 1.0 1.2 1.4 7"
TIP GASKET 500050-TC .018 .18 .25 .30 .36 11" 1503-TC .043 1.1 1.5 1.8 2.1 7"
500055-TC .019 .19 .28 .34 .39 11" 1504-TC .052 1.4 2.0 2.5 2.8 7"
500067-TC .021 .24 .33 .41 .47 12" 1505-TC .057 1.8 2.5 3.1 3.5 7"
500080-TC .023 .28 .40 .49 .57 13" 1506-TC .062 2.1 3.0 3.7 4.2 7"
5001-TC .026 .35 .50 .61 .72 14" 1508-TC .072 2.8 4.0 4.9 5.7 7"
50015-TC .031 .53 .75 .91 1.1 14" 100004-TC .005 .014 .020 .025 .028 3"
5002-TC .036 .71 1.0 1.2 1.4 14" 100008-TC .007 .028 .040 .049 .057 3Q\„"
5003-TC .043 1.1 1.5 1.8 2.1 14" 100011-TC .009 .039 .055 .067 .078 3Q\„"
SPRAY TIP 5004-TC .052 1.4 2.0 2.5 2.8 14" 100017-TC .011 .06 .08 .10 .12 4"
(See Chart) 5005-TC .057 1.8 2.5 3.1 3.5 14" 100025-TC .013 .09 .12 .15 .18 4"
5006-TC .062 2.1 3.0 3.7 4.2 14" 100033-TC .015 .12 .16 .20 .23 4Q\„"
5007-TC .067 2.5 3.5 4.3 5.0 14" 100039-TC .016 .14 .20 .24 .28 5"
5008-TC .072 2.8 4.0 4.9 5.7 14" 100050-TC .018 .18 .25 .30 .36 5"
5010-TC .078 3.5 5.0 6.1 7.1 14" 100067-TC .021 .24 .33 .41 .47 5Q\„"
5015-TC .099 5.3 7.5 9.2 10.6 14" 100080-TC .023 .28 .40 .49 .57 5Q\„"
400004-TC .005 .014 .020 .025 .028 6Q\„" 1001-TC .026 .35 .50 .61 .72 6"
400006-TC .006 .021 .030 .037 .042 6Q\„" 10015-TC .031 .53 .75 .91 1.1 6"
400008-TC .007 .028 .040 .049 .057 6Q\„" 1002-TC .036 .71 1.0 1.2 1.4 6"
400011-TC .009 .039 .055 .067 .078 7" 050004-TC .005 .014 .020 .025 .028 2Q\„"
400017-TC .011 .06 .08 .10 .12 7Q\„" 050008-TC .007 .028 .040 .049 .057 2Q\„"
HIGH PRESSURE 400025-TC .013 .09 .12 .15 .18 8" 050011-TC .009 .039 .055 .067 .078 2Q\„"
TIP RETAINER 400033-TC .015 .12 .16 .20 .23 8Q\„" 050017-TC .011 .06 .08 .10 .12 3"
400039-TC .016 .14 .20 .24 .28 9" 050025-TC .013 .09 .12 .15 .18 3"
400044-TC .017 .16 .22 .27 .31 9Q\„" 050033-TC .015 .12 .16 .20 .23 3Q\„"
400050-TC .018 .18 .25 .30 .36 10" 050039-TC .016 .14 .20 .24 .28 4"
400055-TC .019 .19 .28 .34 .39 10" 050050-TC .018 .18 .25 .30 .36 4"
400067-TC .021 .24 .33 .41 .47 11" 050067-TC .021 .24 .33 .41 .47 4"
400080-TC .023 .28 .40 .49 .57 11" 0501-TC .026 .35 .50 .61 .72 4"
4001-TC .026 .35 .50 .61 .72 12" 05015-TC .031 .53 .75 .91 1.1 4"
40013-TC .029 .46 .65 .80 .92 12" 0502-TC .036 .71 1.0 1.2 1.4 4"
40015-TC .031 .53 .75 .91 1.1 12"
4002-TC .036 .71 1.0 1.2 1.4 12"
4003-TC .043 1.1 1.5 1.8 2.1 12" * Tabulated capacities based on water.
4004-TC .052 1.4 2.0 2.5 2.8 12" ** SPRAY PATTERN DIAMETER IS BASED ON LIQUID WITH
4005-TC .057 1.8 2.5 3.1 3.5 12" VISCOSITY of 20 seconds #4 Zahn Cup…spraying at 1,600 psi
4006-TC .062 2.1 3.0 3.7 4.2 12" (110 bar). Coverages will vary with viscosities and pressures.
4007-TC .067 2.5 3.5 4.3 5.0 12"
4008-TC .072 2.8 4.0 4.9 5.7 12"
4009-TC .076 3.2 4.5 5.5 6.4 12"
4015-TC .099 5.3 7.5 9.2 10.6 12"
SPRAY NOZZLE TIPS
FINE SPRAY (HOLLOW CONE)
STANDARD & HIGH PRESSURE
TN TNSSTC
B fine/hollow cone
UniJet spray tip
high pressure
tungsten carbide orifice
UniJet spray tip
24 T
FEMALE BODY
OR
UNIJET SYSTEM
DESIGN FEATURES
TT TN series UniJet spray tips have pattern with uniform distribution,
MALE BODY a core, body and orifice insert often achieving misting perfor-
and are applicable with the mance. All parts are precision-
UniJet nozzle system. The spray machined. Orifice inserts, cores,
tips produce very finely atomized and strainers are easily removed
droplets in a hollow cone spray for cleaning.
SCREEN STRAINER
PERFORMANCE DATA
SPRAY TIP
UniJet Orifice CAPACITY (gallons per hour) SPRAY ANGLE
(See Chart) Spray Diam. Core
HOLLOW CONE
Tip Nom. No. 30 40 60 100 200 300 500 700 1000 40 80 300
Type TN Inches psi psi psi psi psi psi psi psi psi psi psi psi
TN.60 .016 206 .95 1.3 1.6 2.1 2.5 3.0 35° 65°
TN1 .020 210 1.0 1.2 1.6 2.2 2.7 3.5 4.2 5.0 45° 62° 72°
TN1.5 .020 216 1.3 1.5 1.8 2.4 3.4 4.1 5.3 6.3 7.5 65° 70° 72°
TIP RETAINER TN2 .028 216 1.7 2.0 2.5 3.2 4.5 5.5 7.1 8.4 10.0 70° 75° 77°
TN3 .028 220 2.6 3.0 3.7 4.7 6.7 8.2 10.6 12.5 15.0 65° 70° 73°
TN4 .042 220 3.5 4.0 4.9 6.3 9.0 11.0 14.2 16.7 20 72° 81° 84°
TN6 .042 225 5.2 6.0 7.3 9.5 13.4 16.5 21 25 30 73° 79° 81°
TN8 .060 225 6.9 8.0 9.8 12.6 17.9 22 28 34 40 85° 89° 91°
TN10 .064 420 8.6 10.0 12.2 15.8 22 27 35 42 50 82° 84° 86°
TN12 .076 420 10.4 12.0 14.7 19.0 27 33 43 50 60 78° 82° 85°
TN14 .076 421 12.1 14.0 17.1 22 31 38 50 59 70 85° 88° 90°
TN18 .076 422 15.6 18.0 22 29 40 49 64 75 90 81° 84° 86°
TN22 .076 625 19.1 22 27 35 49 60 78 92 110 70° 72° 75°
TN26 .086 625 23 26 32 41 58 71 92 109 130 73° 74° 77°
HIGH PRESSURE
UNIJET FEMALE BODY
Approx.**
CAPACITY*— (gallons per minute)
Spray COMMON APPLICATIONS
Cone Spray Orifice at various pressures
Pattern ⓦ Evaporative cooling
TNSSTC Tip Diameter
GASKET Diameter
No. Inches 400 750 1000 1500 2000 (at 1 foot
ⓦ Moistening
psi psi psi psi psi distance)
ⓦ Humidifying
TNSSTC .80 .0135 .042 .058 .067 .082 .095 3"
TNSSTC .90 .016 .047 .065 .075 .092 .107 3" ⓦ Misting
TNSSTC 1 .020 .053 .072 .083 .10 .12 3Q\„"
TNSSTC 1.5 .020 .08 .11 .13 .15 .18 3Q\„" ⓦ Gas cooling
SCREEN STRAINER TNSSTC 2 .028 .11 .14 4Q\„"
.17 .21 .24
TNSSTC 3 .028 .16 .22 .25 .31 .35 6"
TNSSTC 4 .042 .21 .29 .33 .41 .47 8"
TNSSTC 6 .042 .32 .43 .50 .61 .71 10" ORDERING INFORMATION
TIP GASKET TNSSTC 8 .060 .42 .58 .67 .82 .94 12" UNIJET
TNSSTC 9 .060 .47 .65 .75 .92 1.1 14" COMPLETE NOZZLE
TNSSTC 10 .064 .53 .72 .83 1.0 1.2 16"
TNSSTC 12 .076 .63 .87 1.0 1.2 1.4 18" SPRAY TIP
TNSSTC 14 .076 .74 1.0 1.2 1.4 1.6 14" NOZZLE
TNSSTC 15 .081 .79 1.1 1.25 1.5 1.7 16" BODY + TN - SS 10
TNSSTC 16 .086 .84 1.2 1.33 1.6 1.9 18"
SPRAY TIP TNSSTC 18 .076 .95 1.3 16"
1.5 1.8 2.1 Tip Material Capacity
(See Chart) TNSSTC 20 .081 1.1 1.4 1.7 2.1 2.4 18" Type Code Size
TNSSTC 22 .076 1.2 1.6 1.8 2.3 2.6 12"
TNSSTC 24 .081 1.3 1.7 2.0 2.5 2.8 13"
TNSSTC 26 .086 1.4 1.9 2.2 2.7 3.1 14"
UNIJET SYSTEM
DESIGN FEATURES DESIGN FEATURES DESIGN FEATURES DESIGN FEATURES
This abrasive-resistant UniJet HV series orifices are useful in The 11430 UniJet nozzle assem- UniJet blow-off nozzle assemblies
spray nozzle with ceramic tip applications requiring a fine finish. bly is designed for use in high offer all the useful advantages
insert is widely used for seal They provide a flat spray pattern pressure applications up to 3000 of the UniJet system such as
coating of parking lots, driveways with more complete feathering of psi (200 bar). interchangeable nozzle tips and
and highways. The body and cap the spray pattern edges. components.
The assembly includes a nozzle
are constructed of brass, with a HV orifices fit at the inlet of body and a high pressure inter- Blow-off nozzles are specially
ceramic tip insert. A Buna-N UniJet TC tips. They feature a nal strainer in a choice of mesh designed for use with air and
gasket provides a tight seal. tungsten carbide orifice insert screen sizes. steam. They provide a uniform
The tip produces an 80¡ spray mounted in a nylon orifice holder, flat spray pattern.
The 11430 UniJet nozzle assem-
angle. Three nozzle capacities which serves as a gasket. bly is compatible with all UniJet UniJet blow-off nozzle assem-
are available: 5, 7, or 10 gpm at TC flat spray tips and UniJet blies are compatible with
40 psi (19.7, 28, or 39 l/min at TNSSTC hollow cone spray tips. standard UniJet nozzle bodies.
3 bar) with !\›", #\°" and !\¤" NPT Write for Data Sheet 11430.
or BSPT (M) connections. Write For more information about differ-
for Data Sheet 23825. ent types of blow-off nozzles, see
WindJet¨ in Section F, page 13.
LARGE DROPLET
TIP RETAINER
HOLLOW CONE NOZZLE
ing a nylon body, cap, and
23945 strainer sub-assembly, and a
wide angle spray polypropylene spray tip. The
14
⁄ " NPT or BSPT (M) nozzle is ideal for cooling
applications without misting.
TT
MALE BODY
DESIGN FEATURES ORDERING INFORMATION
The Model 23945 UniJet nozzle SPECIFY
COMMON APPLICATIONS
provides a gentle spray of large
ⓦ Food processing/meat packing droplets in a wide angle hollow 23945 -1/4TT- NYB - *
ⓦ Cooling applications without cone pattern with a thick annulus.
SCREEN STRAINER It is available in two sizes, featur- Model Body Material Size
misting Number Type
PERFORMANCE DATA
SPRAY TIP Capacities in gpm
(See Chart) Tip and Strainer
and Spray Angle at pressure psi
Nozzle Number Tip Number Sub-Assembly
Number 15 20 25 30 40 50 60
psi psi psi psi psi psi psi
.34 .40 .44 .48 .54 .59 .63
23945-1/4TT-NYB-2.8W CP23950-2.8W-PP 23951-2.8W
156° 152° 147° 146° 143° 141° 139°
.53 .61 .68 .75 .86 .96 1.05
23945-1/4TT-NYB-4.3W CP23949-4.3W-PPB 23951-4.3W
TIP RETAINER 140° 137° 134° 133° 131° 127° 126°
General Purpose
Spray nozzles
section C
INDEX
WhirlJet®
Small Capacity
Standard Angle A, AX, B, BX................... C2, C3
Wide Angle A-W, AX-W, B-W, BX-W....... C4
Extra Wide Angle E ........................................... C5
Medium-Large
Capacity C, CX, D......................... C6, C7
Large Capacity CRC, CF................................ C8
9360 Polypropylene AP, LAP, LBP.................. C9-C11
In-Line Series BD........................................ C12
Miner Nozzles BDM.................................... C13
30¡ HollowJet® G, H..................................... C13
High Pressure
SprayDry® AA, BB, AAA, 104....... C14, C15
Offset Type BA........................................ C16
DeflectoJet® 8686.....................................C16
SpiralJet®
Threaded Type BSJ...................................... C17
SpiralJet ®
C
2
GENERAL PURPOSE
COMMON APPLICATIONS
ⓦ Washing gas and air to
remove fly ash and other
products of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Water aerating
ACCESSORIES
ⓦ Pressure Regulators
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Swivel Connectors
ⓦ
AX B
ⓦ
BX
ⓦ ⓦ 0.5 Q\´„ E\Á‰
psi
.05
psi psi
.06
psi
.07
psi
.09
psi
.10
psi
.12
psi
.14
psi psi psi psi
GENERAL PURPOSE
ⓦ ⓦ ⓦ ⓦ 5 Q\ˆ Q\ˆ .27 .35 .50 .61 .70 .86 1.0 1.2 1.4 1.6 56° 67° 76°
ⓦ ⓦ ⓦ ⓦ 8 T\´„ T\´„ .44 .57 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 56° 65° 70°
ⓦ ⓦ ⓦ ⓦ 10 QQ\Á‰ QQ\Á‰ .55 .71 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 55° 65° 72°
ⓦ ⓦ ⓦ ⓦ 1 Q\ŒÁ Q\ŒÁ .10 .12 .14 .17 .20 .24 .28 .31 53° 67°
ⓦ ⓦ ⓦ ⓦ 2 T\Á‰ T\Á‰ .20 .25 .28 .35 .40 .48 .56 .63 62° 71°
ⓦ ⓦ ⓦ ⓦ 3 E\´„ E\´„ .21 .30 .37 .42 .52 .60 .73 .85 .95 51° 65° 78°
1/4 ⓦ ⓦ ⓦ ⓦ 5 O\Á‰ O\Á‰ .27 .35 .50 .61 .70 .86 1.0 1.2 1.4 1.6 63° 73° 79°
ⓦ ⓦ ⓦ ⓦ 8 T\´„ T\´„ .44 .56 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 61° 69° 73°
ⓦ ⓦ ⓦ ⓦ 10 E\ŒÁ QQ\Á‰ .55 .71 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 63° 70° 74°
ⓦ ⓦ ⓦ ⓦ 15 QT\Á‰ QE\Á‰ .82 1.1 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 63° 71° 72°
ⓦ ⓦ ⓦ ⓦ 5 O\Á‰ Q\ˆ .27 .35 .50 .61 .70 .86 1.0 1.2 1.4 1.6 64° 73° 79°
ⓦ ⓦ ⓦ ⓦ 8 QQ\Á‰ T\´„ .44 .56 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 62° 70° 74°
ⓦ ⓦ ⓦ ⓦ 10 QE\Á‰ QQ\Á‰ .55 .72 1.0 1.2 1.4 1.7 2.0 2.4 2.8 3.1 64° 72° 75°
ⓦ ⓦ ⓦ ⓦ 15 QT\Á‰ U\´„ .82 1.1 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 64° 72° 74°
ⓦ ⓦ ⓦ ⓦ 20 O\´„ Q\‰ 1.1 1.4 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 63° 70° 74°
3/8 ⓦ ⓦ ⓦ ⓦ 25 QO\Á‰ QO\Á‰ 1.4 1.8 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 63° 70° 74°
ⓦ ⓦ ⓦ ⓦ 30 WQ\Á‰ T\ŒÁ 1.6 2.1 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 63° 70° 74°
ⓦ ⓦ 15-30.1 QT\Á‰ T\ŒÁ 1.3 1.6 2.3 2.8 3.2 4.0 4.6 5.6 6.5 7.3 40° 50° 54°
ⓦ ⓦ 25-30.1 QO\Á‰ T\ŒÁ 1.5 2.0 2.8 3.4 4.0 4.8 5.6 6.9 8.0 8.9 40° 47° 51°
ⓦ ⓦ 50-50.1 QQ\´„ E\ˆ 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 40° 47° 50°
ⓦ ⓦ 50-50.3 QQ\´„ E\ˆ 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 72° 76° 78°
ⓦ ⓦ ⓦ ⓦ 25 E\ˆ Q\‰ 1.4 1.8 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 63° 66° 71°
ⓦ ⓦ ⓦ ⓦ 30 E\ˆ QO\Á‰ 1.6 2.1 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 67° 71° 75°
1/2 ⓦ ⓦ ⓦ ⓦ 40 E\ˆ WE\Á‰ 2.2 2.8 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 72° 76° 78°
ⓦ ⓦ ⓦ ⓦ 50 E\ˆ U\ŒÁ 2.7 3.5 5.0 6.1 7.1 8.5 10.0 12.3 14.2 15.8 74° 79° 82°
HOLLOW CONE
ⓦ ⓦ ⓦ ⓦ 60 E\ˆ EE\Á‰ 3.3 4.3 6.0 7.3 8.5 10.4 12.0 14.7 17.0 19.0 77° 82° 86°
ⓦ ⓦ ⓦ ⓦ 40 Q\„ T\ŒÁ 2.2 2.8 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 70° 73° 74°
ⓦ ⓦ ⓦ ⓦ 50 Q\„ E\ˆ 2.7 3.5 5.0 6.1 7.1 8.5 10.0 12.3 14.2 15.8 72° 75° 77°
ⓦ ⓦ ⓦ ⓦ 60 Q\„ U\ŒÁ 3.3 4.3 6.0 7.3 8.5 10.4 12.0 14.7 17.0 19.0 74° 76° 79°
3/4 ⓦ ⓦ ⓦ ⓦ 70 Q\„ Q\„ 3.8 5.0 7.0 8.5 9.9 12.1 14.0 17.1 19.8 22.0 76° 79° 83°
ⓦ ⓦ ⓦ ⓦ 80 Q\„ O\ŒÁ 4.4 5.7 8.0 9.8 11.3 13.8 16.0 19.6 23.0 25.0 78° 82° 84°
ⓦ ⓦ ⓦ ⓦ 90 Q\„ EU\Á‰ 4.9 6.4 9.0 11.0 12.7 15.6 18.0 22.0 25.0 29.0 81° 84° 84°
ⓦ ⓦ ⓦ ⓦ 100 Q\„ T\ˆ 5.5 7.1 10.0 12.2 14.1 17.3 20.0 25.0 28.0 32.0 83° 86° 86°
ⓦ ⓦ ⓦ ⓦ 110 Q\„ RE\Á‰ 6.0 7.8 11.0 13.5 15.5 19.0 22.0 27.0 31.0 35.0 85° 88° 88°
ⓦ ⓦ ⓦ ⓦ 120 Q\„ WE\´„ 6.6 8.5 12.0 14.7 17.0 21.0 24.0 29.0 34.0 38.0 87° 90° 90°
Standard Materials Material Code INTERMEDIATE CAPACITIES—Caps are interchangeable for
Q Q Q Q no material code = Brass in-between capacities within each pipe size group... write for
Q Q Q Q I = Mild Steel Data Sheets 3055, 3986 and 3987.
Q Q Q Q SS = 303 Stainless Steel Spray Dimension Data... write for Data Sheets 15350
Q Q Q Q 316SS = 316 Stainless Steel
and 15362.
Q Q PVC = Polyvinyl Chloride
1/8 ⓦ ⓦ ⓦ ⓦ 3-5W E\´„ Q\ˆ .29 .34 .42 .48 .59 .68 .83 .96 116° 110° 95°
ⓦ ⓦ ⓦ ⓦ 2-10W T\Á‰ QQ\Á‰ .35 .41 .51 .59 .72 .82 1.0 1.2 130° 135° 120°
ⓦ ⓦ ⓦ ⓦ 5-5W Q\ˆ Q\ˆ .42 .50 .61 .71 .86 1.0 1.2 1.4 116° 110° 92°
ⓦ ⓦ ⓦ ⓦ 5-10W Q\ˆ QQ\Á‰ .46 .54 .65 .80 .92 1.1 1.3 1.6 1.8 126° 121° 95°
ⓦ ⓦ ⓦ ⓦ 8-10W T\´„ QQ\Á‰ .64 .75 .90 1.1 1.3 1.6 1.8 2.2 2.5 124° 112° 90°
ⓦ ⓦ ⓦ ⓦ 1-1W Q\ŒÁ Q\ŒÁ .10 .12 .14 .17 .20 .25 .28 117° 111°
ⓦ ⓦ ⓦ ⓦ 1-5W Q\ŒÁ Q\ˆ .17 .21 .24 .29 .34 .42 .48 123° 124°
ⓦ ⓦ ⓦ ⓦ 1-10W Q\ŒÁ QQ\Á‰ .21 .26 .30 .36 .42 .51 .60 144° 139°
ⓦ ⓦ ⓦ ⓦ 1-15W Q\ŒÁ U\´„ .24 .29 .34 .42 .48 .59 .68 128° 132°
ⓦ ⓦ ⓦ ⓦ 2-5W T\Á‰ Q\ˆ .29 .34 .42 .49 .60 .68 .84 .89 118° 123° 113°
ⓦ ⓦ ⓦ ⓦ 2-10W T\Á‰ QQ\Á‰ .35 .41 .51 .59 .72 .82 1.0 1.2 138° 136° 126°
1/4 ⓦ ⓦ ⓦ ⓦ 5-5W O\Á‰ Q\ˆ .42 .50 .61 .71 .86 1.0 1.2 1.4 114° 113° 104°
ⓦ ⓦ ⓦ ⓦ 5-10W O\Á‰ QQ\Á‰ .46 .54 .65 .80 .92 1.1 1.3 1.6 1.8 130° 130° 119°
ⓦ ⓦ ⓦ ⓦ 5-15W O\Á‰ U\´„ .52 .64 .77 .94 1.1 1.3 1.5 1.8 2.2 130° 132° 120°
ⓦ ⓦ ⓦ ⓦ 8-10W T\´„ QQ\Á‰ .64 .75 .90 1.1 1.3 1.6 1.8 2.2 2.5 129° 122° 103°
ⓦ ⓦ ⓦ ⓦ 10-10W E\ŒÁ QQ\Á‰ .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 120° 108° 95°
DESIGN FEATURES ⓦ ⓦ ⓦ ⓦ 8-15W T\´„ U\´„ .78 .92 1.1 1.4 1.6 1.9 2.2 2.7 3.1 129° 122° 107°
ⓦ ⓦ ⓦ ⓦ 10-15W E\ŒÁ U\´„ .86 1.0 1.2 1.5 1.7 2.1 2.4 3.0 3.4 120° 108° 97°
Small capacity Wide Spray ⓦ ⓦ ⓦ ⓦ 15-15W QT\Á‰ U\´„ 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 101° 95° 88°
WhirlJet spray nozzles feature ⓦ ⓦ ⓦ ⓦ 5-10W O\Á‰ QQ\Á‰ .46 .54 .65 .80 .92 1.1 1.3 1.6 1.8 130° 123° 102°
a hollow cone spray pattern with ⓦ ⓦ ⓦ ⓦ 5-15W O\Á‰ U\´„ .52 .64 .77 .94 1.1 1.3 1.5 1.8 2.2 138° 131° 112°
ⓦ ⓦ ⓦ ⓦ 8-10W QQ\Á‰ QQ\Á‰ .64 .75 .90 1.1 1.3 1.6 1.8 2.2 2.5 122° 110° 96°
a ring-shaped impact area and ⓦ ⓦ ⓦ ⓦ 10-10W QE\Á‰ QQ\Á‰ .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 116° 108° 93°
spray angles of 88¡ to 144¡. ⓦ ⓦ ⓦ ⓦ 8-15W QQ\Á‰ U\´„ .78 .92 1.1 1.4 1.6 1.9 2.2 2.7 3.1 133° 120° 105°
ⓦ ⓦ ⓦ ⓦ 10-15W QE\Á‰ U\´„ .86 1.0 1.2 1.5 1.7 2.1 2.4 3.0 3.4 126° 115° 100°
They produce a uniform distribu- ⓦ ⓦ ⓦ ⓦ
HOLLOW CONE
3/8 8-25W QQ\Á‰ QO\Á‰ .92 1.1 1.3 1.6 1.9 2.3 2.6 3.2 3.7 122° 118° 109°
tion of small to medium-sized ⓦ ⓦ ⓦ ⓦ 10-20W QE\Á‰ QT\Á‰ .97 1.1 1.4 1.7 1.9 2.4 2.7 3.3 3.9 118° 112° 102°
droplets and have large and unob- ⓦ ⓦ ⓦ ⓦ 15-15W QT\Á‰ U\´„ 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 116° 106° 95°
structed flow passages which ⓦ ⓦ ⓦ ⓦ 15-20W QT\Á‰ QT\Á‰ 1.2 1.5 1.7 2.1 2.5 3.0 3.5 4.3 4.9 113° 108° 98°
ⓦ ⓦ ⓦ ⓦ 20-20W O\´„ QT\Á‰ 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 106° 102° 95°
minimize or eliminate clogging. ⓦ ⓦ ⓦ ⓦ 15-30W QT\Á‰ T\ŒÁ 1.6 1.8 2.2 2.7 3.1 3.8 4.4 5.4 6.2 116° 110° 102°
A-W and B-W series Wide Spray ⓦ ⓦ ⓦ ⓦ 25-25W QO\Á‰ QO\Á‰ 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 105° 100° 93°
ⓦ ⓦ ⓦ ⓦ 25-30W QO\Á‰ T\ŒÁ 2.0 2.3 2.8 3.4 4.0 4.9 5.6 6.9 7.9 105° 101° 94°
WhirlJet spray nozzles are
1/2 ⓦ ⓦ ⓦ ⓦ 50-50W E\ˆ U\ŒÁ 3.5 4.2 5.0 6.1 7.1 8.6 10.0 12.3 14.2 110° 102° 93°
precision-machined from solid
3/4 ⓦ ⓦ ⓦ ⓦ 80-80W Q\„ O\ŒÁ 5.7 6.7 8.0 9.8 11.3 13.8 16.0 19.6 23.0 115° 107° 97°
bar stock to exacting internal
Standard Materials Material Code
proportions. They have remov- Q Q Q Q no material code = Brass
able caps and the original Q Q Q Q I = Mild Steel
design WhirlJet whirlchamber. Q Q Q Q SS = 303 Stainless Steel
Q Q Q Q 316SS = 316 Stainless Steel
AX-W and BX-W series Wide
Q Q PVC = Polyvinyl Chloride
Spray WhirlJet spray nozzles
feature the same accurate
performance as the A-W and
B-W series, plus the added
advantage of the longer-life
COMMON APPLICATIONS ORDERING INFORMATION
ⓦ Washing gas and air to
slope bottom designÉto reduce
the Òdrilling effectÓ of the fluid remove fly ash and other
1/4 A - SS 10-10W
vortex in the whirlchamber. products of combustion Inlet Nozzle Material Capacity
Connec- Type Code Size
ⓦ Gas cooling tion
Pipe
ⓦ Water cooling Size
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Water aerating
SPRAY NOZZLES
EXTRA WIDE ANGLE
SMALL CAPACITY
E E
one-piece bar stock type one-piece cast type
1⁄8"-1⁄4" NPT or BSPT (F) 3⁄8"-1⁄2" NPT or BSPT (F)
C
5
PERFORMANCE DATA
GENERAL PURPOSE
Nozzle NOZZLE Body CAPACITY SPRAY
Inlet TYPE Inlet Orifice (gallons per minute) ANGLE
Capacity Diam. Diam.
Conn.
NPT or Size Nom. Nom. 3 5 7 10 15 20 30 40 60 80 100 7 20 80
BSPT E Inches Inches psi psi psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ 2 Q\ŒÁ Q\‰ .20 .25 .28 .35 .40 .49 .56 .63 165° 158°
1/8
ⓦ 5 E\´„ Q\‰ .27 .35 .42 .50 .61 .70 .86 1.0 1.2 1.4 1.6 164° 154° 147°
ⓦ 2 Q\ŒÁ Q\‰ .20 .25 .28 .35 .40 .49 .56 .63 165° 158°
ⓦ 5 E\´„ Q\‰ .27 .35 .42 .50 .61 .70 .86 1.0 1.2 1.4 1.6 164° 154° 147°
1/4 ⓦ 5.8 U\Á‰ Q\‰ .32 .41 .49 .58 .71 .82 1.0 1.2 1.4 1.6 1.8 164° 154° 147°
ⓦ 8 Q\ˆ T\ŒÁ .44 .56 .66 .80 .98 1.1 1.4 1.6 1.9 2.3 2.5 164° 160° 151°
ⓦ 10 O\Á‰ T\ŒÁ .55 .71 .84 1.0 1.2 1.4 1.7 2.0 2.4 2.8 3.2 164° 154° 147°
ⓦ 8 U\Á‰ EQ\Á‰ .44 .56 .66 .80 .98 1.1 1.4 1.6 1.9 2.3 2.5 164° 160° 157°
ⓦ 10 Q\ˆ EQ\Á‰ .55 .71 .84 1.0 1.2 1.4 1.7 2.0 2.4 2.8 3.2 164° 160° 157°
ⓦ 15 QQ\Á‰ EQ\Á‰ .82 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 165° 163° 155°
3/8 ⓦ 20 QE\Á‰ EQ\Á‰ 1.0 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 162° 152° 147°
ⓦ 25 QT\Á‰ EQ\Á‰ 1.4 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 162° 158° 154°
DESIGN FEATURES ⓦ 33 QU\Á‰ RQ\Á‰ 1.8 2.3 2.8 3.3 4.0 4.7 5.7 6.6 8.1 9.2 10.4 162° 154° 148°
Small capacity Extra Wide Spray ⓦ 53 E\ˆ RQ\Á‰ 2.9 3.8 4.4 5.3 6.5 7.5 9.2 10.6 13.0 15.0 16.8 159° 152° 149°
WhirlJet spray nozzles feature a ⓦ 25 U\´„ RQ\Á‰ 1.4 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 162° 158° 154°
ⓦ 30 Q\‰ RQ\Á‰ 1.6 2.1 2.5 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 163° 155° 148°
hollow cone spray pattern with a 1/2 ⓦ 40 QO\Á‰ RQ\Á‰ 2.2 2.8 3.4 4.0 4.9 5.6 6.9 8.0 9.8 11.3 12.6 160° 152° 144°
ring-shaped impact area and ⓦ 53 E\ˆ RQ\Á‰ 2.9 3.8 4.4 5.3 6.5 7.5 9.2 10.6 13.0 15.0 16.8 159° 152° 149°
HOLLOW CONE
spray angles of 144¡ to 165¡. Standard
Materials Material Code
They produce a uniform distribu- Q
tion of very small to medium- Q
no material code = Brass DIMENSIONS & WEIGHTS
SS = 303 Stainless Steel
sized droplets and have large un- Based on largest/heaviest version of each type.
obstructed flow passages which
minimize or eliminate clogging. Nozzle
Inlet Net
Capacity
Conn. Weight A B C D E L H
!\°" and !\›" E series nozzles are Size
NPT or oz.
machined from solid bar stock in BSPT
brass or stainless steel. Brass and 1/8 2, 5 1Q\„ T\ˆ" Sq. E\‰" QT\´„" 1Q\ŒÁ" WT\´„"
#\°" and !\¤" E series nozzles are Stainless Steel 1/4 2, 5 1Q\„ T\ˆ" Sq. QE\ŒÁ" QT\´„" 1Q\ˆ" WT\´„"
Bar Stock 1/4 8,10 2Q\‰ E\‰" Sq. U\ˆ" Q\„" 1Q\‰" U\ˆ"
machined from solid bar stock in
stainless steel and are precision- 8, 10, 15, 1Q\‰"
3/8 18 1E\ˆ" E\‰" 2" 1E\ˆ"
20, 25 Sq.
finished from castings in brass. Stainless Steel
3/8 33, 53
Bar Stock 1Q\„"
25, 30, 17 1T\ˆ" U\ˆ" 2E\ˆ" 1T\ˆ"
1/2 Sq.
40, 53
COMMON APPLICATIONS 3/8
8, 10, 15,
4Q\‰ U\ˆ" Oct. 1U\´„" QO\´„" E\ˆ" 1U\ŒÁ" 1QE\ŒÁ" 1Q\ŒÁ"
Cast 20, 25
ⓦ Moistening and wetting Brass 25,30,
operations Type 1/2 33,40, 6 1" Oct. 1U\ŒÁ" QQ\ŒÁ" Q\„" 1WT\´„" 2E\ŒÁ" 1Q\‰"
53
ⓦ Chemical reaction processing
C
6
GENERAL PURPOSE
ⓦ Aerating
GENERAL PURPOSE
ⓦ 4 WT\Á‰ 2.6 3.0 3.4 4.0 4.8 5.8 6.8 8.3 9.5 11.7 13.5 15.1 68° 71° 73°
U\ŒÁ
ⓦ 5 QT\´„ 3.3 3.8 4.2 5.0 6.0 7.3 8.4 10.4 11.9 14.6 16.9 18.9 74° 77° 80°
ⓦ 7 ET\Á‰ 4.6 5.3 5.9 7.0 8.4 10.3 11.9 14.5 16.7 21 24 26 77° 80° 83°
ⓦ 5 WT\Á‰ 3.3 3.8 4.2 5.0 6.0 7.3 8.4 10.4 11.9 14.6 16.9 18.9 59° 61° 63°
ⓦ 6 WO\Á‰ 3.9 4.5 5.1 6.0 7.2 8.8 10.2 12.4 14.3 17.5 20 23 62° 64° 66°
QO\´„
ⓦ 7 Q\„ 4.6 5.3 5.9 7.0 8.4 10.3 11.9 14.5 16.7 21 24 26 70° 71° 72°
ⓦ 10 WQ\´„ 6.5 7.6 8.4 10.0 11.9 14.6 16.9 21 24 29 34 38 73° 75° 77°
3/4 ⓦ 4 WE\Á‰ 2.6 3.0 3.4 4.0 4.8 5.8 6.8 8.3 9.5 11.7 13.5 15.1 65° 66° 67°
ⓦ 5 WU\Á‰ 3.3 3.8 4.2 5.0 6.0 7.3 8.4 10.4 11.9 14.6 16.9 18.9 68° 69° 70°
ⓦ 6 O\ŒÁ EQ\Á‰ 3.9 4.5 5.1 6.0 7.2 8.8 10.2 12.4 14.3 17.5 20 23 70° 73° 77°
ⓦ 7 ET\Á‰ 4.6 5.3 5.9 7.0 8.4 10.3 11.9 14.5 16.7 21 24 26 72° 75° 80°
ⓦ 10 WQ\´„ 6.5 7.6 8.4 10.0 11.9 14.6 16.9 21 24 29 34 38 77° 80° 84°
ⓦ ⓦ 7 WO\Á‰ 4.6 5.3 5.9 7.0 8.4 10.3 11.9 14.5 16.7 21 24 26 64° 65° 66°
ⓦ ⓦ 8 Q\„ 5.2 6.0 6.8 8.0 9.6 11.7 13.5 16.5 19.1 23 27 30 65° 66° 67°
1 ⓦ ⓦ 9
QQ\ŒÁ O\ŒÁ 5.9 6.8 7.6 9.0 10.8 13.2 15.2 18.6 22 26 30 34 66° 67° 69°
ⓦ ⓦ 10 EO\Á‰ 6.5 7.6 8.4 10.0 11.9 14.6 16.9 21 24 29 34 38 67° 69° 71°
ⓦ ⓦ 12 RE\Á‰ 7.8 9.1 10.2 12.0 14.3 17.5 20 25 29 35 41 45 70° 73° 75°
ⓦ ⓦ 15 QE\ŒÁ 9.8 11.3 12.7 15.0 17.9 22 25 31 36 44 51 57 76° 79° 81°
ⓦ ⓦ 10 O\ŒÁ 6.5 7.6 8.4 10.0 11.9 14.6 16.9 21 24 29 34 38 65° 67° 67°
ⓦ ⓦ 12 RQ\Á‰ 7.8 9.1 10.2 12.0 14.3 17.5 20 25 29 35 41 45 68° 70° 71°
1-1/4 ⓦ ⓦ 14 WU\´„ WE\´„ 9.2 10.6 11.8 14.0 16.7 21 24 29 34 41 47 53 71° 73° 75°
ⓦ ⓦ 16 TQ\Á‰ 10.5 12.1 13.5 16.0 19.1 23 27 33 38 47 54 60 74° 75° 77°
ⓦ ⓦ 20 YQ\Á‰ 13.1 15.1 16.9 20 24 29 34 41 48 59 68 76 76° 77° 79°
ⓦ ⓦ 16 QQ\ŒÁ 10.5 12.1 13.5 16.0 19.1 23 27 33 38 47 54 60 64° 67° 69°
ⓦ ⓦ 20 13.1 15.1 16.9 20 24 29 34 41 48 59 68 76 69° 72° 74°
HOLLOW CONE
1-1/2 1E\´„ TT\Á‰
ⓦ ⓦ 25 1Q\Á‰ 16.4 18.9 21 25 30 37 42 52 60 73 85 95 72° 74° 76°
ⓦ ⓦ 30 1Q\ˆ 20 23 25 30 36 44 51 62 72 88 101 113 74° 76° 78°
ⓦ ⓦ 30 QT\ŒÁ 20 23 25 30 36 44 51 62 72 88 101 113 66° 67° 70°
ⓦ ⓦ 35 1Q\ŒÁ 23 26 30 35 42 51 59 72 84 103 118 132 68° 70° 73°
2 ⓦ ⓦ 40
1U\ŒÁ 1E\ŒÁ 26 30 34 40 48 59 68 83 96 117 135 151 70° 72° 75°
ⓦ ⓦ 45 1QO\Á‰ 29 34 38 45 54 66 76 93 108 132 152 170 72° 74° 78°
ⓦ ⓦ 50 1WU\Á‰ 33 38 42 50 60 73 84 104 119 146 169 189 74° 77° 82°
ⓦ ⓦ 60 1O\ŒÁ 39 45 51 60 72 88 102 124 143 175 203 227 77° 79° 84°
ⓦ ⓦ 60 1WU\Á‰ 39 45 51 60 72 88 102 124 143 175 203 227 67° 68° 71°
ⓦ ⓦ 70 1QO\´„ 46 53 59 70 84 103 119 145 167 205 237 264 69° 71° 74°
2-1/2 ⓦ ⓦ 80 1U\ˆ 1RU\Á‰ 52 60 68 80 96 117 135 165 191 234 270 302 71° 73° 77°
ⓦ ⓦ 90 1U\ˆ 59 68 76 90 108 132 152 186 215 264 304 340 73° 75° 80°
ⓦ ⓦ 100 2 65 76 84 100 120 146 169 207 239 293 338 378 77° 79° 83°
Standard
Materials Material Code
Q Q Q no material code = Brass
Q Q Q I = Cast Iron
Q Q SS = 316 Stainless Steel (note: Q\„" and E\‰" not available in Stainless Steel)
C
8
GENERAL PURPOSE
ⓦ Chemical processes
ⓦ 12-45° O\ŒÁ 7.8 10.2 12.0 14.3 20 25 29 35 41 45 45° 49° 51°
1-1/4 ⓦ 14-45° WU\´„ WQ\´„ 9.2 11.8 14.0 16.7 24 29 34 41 47 53 45° 48° 51°
ⓦ 16-45° E\‰ 10.5 13.5 16.0 19.1 27 33 38 47 54 61 45° 48° 50°
ⓦ 20-45° U\ˆ 13.1 16.9 20.0 24 34 41 48 59 68 76 45° 47° 49°
ⓦ ⓦ 30-45° QT\ŒÁ 20 25 30 36 51 62 72 88 101 113 45° 49° 52°
ACCESSORIES ⓦ ⓦ 35-45° 1Q\ŒÁ 23 30 35 42 59 72 84 103 118 132 45° 49° 51°
2 ⓦ ⓦ 40-45° 1U\ŒÁ 1E\ŒÁ 26 34 40 48 68 83 96 117 135 151 45° 48° 50°
SEE SECTION G FOR ⓦ ⓦ 45-45° 1QU\Á‰ 29 38 45 54 76 93 108 132 152 170 45° 48° 50°
COMPLETE INFORMATION. ⓦ ⓦ 50-45° 1E\ˆ 33 42 50 60 84 104 119 146 169 189 45° 47° 49°
Split-Eyelet Connector ⓦ ⓦ 55-45° 1WO\Á‰ 36 46 55 66 93 114 131 161 186 208 45° 47° 49°
with Pressure Gauge ⓦ ⓦ ⓦ 70 1E\ˆ 46 59 70 84 119 145 167 205 237 264 65° 66° 69°
ⓦ ⓦ ⓦ 85 1EU\Á‰ 56 72 85 102 144 176 203 249 287 322 67° 68° 71°
ⓦ ⓦ ⓦ 100 1E\‰ 65 84 100 120 169 207 239 293 338 378 69° 72° 74°
ⓦ ⓦ ⓦ 120 2Q\ŒÁ 78 102 120 143 203 249 287 351 405 454 71° 73° 77°
3 ⓦ ⓦ ⓦ 140 2Q\‰ 2T\ŒÁ 92 118 140 167 237 290 335 410 474 530 73° 75° 80°
ⓦ ⓦ ⓦ 70-45° 1E\ˆ 46 59 70 84 119 145 167 205 237 264 45° 49° 52°
ⓦ ⓦ ⓦ 85-45° 1EU\Á‰ 56 72 85 102 144 176 203 249 287 322 45° 49° 51°
ⓦ ⓦ ⓦ 100-45° 1E\‰ 65 84 100 120 169 207 239 293 338 378 45° 48° 51°
ⓦ ⓦ ⓦ 120-45° 2Q\Á‰ 78 102 120 143 203 249 287 351 405 454 45° 48° 50°
ⓦ ⓦ ⓦ 140-45° 2T\ŒÁ 92 118 140 167 237 290 335 410 474 530 45° 47° 49°
ⓦ ⓦ ⓦ 150 2 98 127 150 179 254 310 359 440 507 567 66° 67° 70°
ⓦ ⓦ ⓦ 175 2WQ\Á‰ 115 148 175 209 296 362 418 512 592 661 68° 70° 71°
ⓦ ⓦ ⓦ 200 2QQ\ŒÁ 131 169 200 239 338 414 478 586 676 756 70° 72° 74°
Junction Box ⓦ ⓦ ⓦ 225 2QT\ŒÁ 147 190 225 269 380 466 538 660 761 851 72° 74° 77°
ⓦ ⓦ ⓦ 250 3Q\‰ 164 212 250 299 423 518 598 731 845 945 74° 76° 81°
4 ⓦ ⓦ ⓦ 275 3Q\ˆ 3T\ˆ 180 232 275 329 465 568 656 805 929 1040 78° 80° 83°
ⓦ ⓦ ⓦ 150-45° 2 98 127 150 179 254 310 359 440 507 567 45° 49° 52°
ⓦ ⓦ ⓦ 175-45° 2WQ\Á‰ 115 148 175 209 296 362 418 512 592 661 45° 49° 51°
ⓦ ⓦ ⓦ 200-45° 2QQ\ŒÁ 131 169 200 239 338 414 478 586 676 756 45° 48° 51°
ⓦ ⓦ ⓦ 225-45° 2QT\ŒÁ 147 190 225 269 380 466 538 660 761 851 45° 48° 50°
ⓦ ⓦ ⓦ 250-45° 3Q\‰ 164 212 250 299 423 518 598 731 845 945 45° 47° 49°
ⓦ ⓦ 250 2WO\Á‰ 164 212 250 299 423 518 598 731 845 945 65° 67° 69°
ⓦ ⓦ 300 2E\‰ 196 253 300 358 506 620 716 877 1010 1130 66° 68° 70°
ⓦ ⓦ 350 3 229 296 350 418 591 724 836 1020 1180 1320 68° 70° 72°
See page C6. ⓦ ⓦ 400 3Q\‰ 262 338 400 478 676 826 955 1170 1350 1510 70° 73° 75°
ⓦ ⓦ 450 3QT\´„ 294 380 450 537 760 930 1075 1315 1520 1700 72° 75° 77°
6 ⓦ ⓦ 500 4U\ˆ 3TE\Á‰ 327 422 500 597 845 1035 1195 1460 1690 1890 74° 76° 79°
ⓦ ⓦ 550 4QU\Á‰ 360 465 550 657 928 1140 1315 1610 1860 2080 76° 79° 83°
ⓦ ⓦ 625 5Q\ˆ 408 528 625 746 1055 1290 1490 1830 2110 2360 78° 81° 86°
ORDERING INFORMATION ⓦ ⓦ 440-65° 3QT\´„ 288 372 440 526 743 910 1050 1290 1485 1660 60° 61° 62°
ⓦ ⓦ 550-65° 4QU\Á‰ 360 465 550 657 928 1140 1315 1610 1860 2080 64° 65° 66°
ⓦ ⓦ 625-65° 5Q\ˆ 408 528 625 746 1055 1290 1490 1830 2110 2360 65° 66° 67°
2 CRC - SS 30-45°
Standard Materials
Material Code * Available in one-piece or two-piece models.
Inlet Nozzle Material Capacity Q Q
Connec- Type Code Size no material code = Brass
tion Q Q I = Cast Iron
Pipe Q Q
Size SS = 316 Stainless Steel
Q Consult your local Sales Representative
for specific material availability
SPRAY NOZZLES 9360 SERIES Patent No. 4,664,314
CENTER-POST STYLE—
POLYPROPYLENE
AP LAP LBP
polypropylene/ polypropylene/ polypropylene/
center-post design center-post design center-post design
1⁄4"-3⁄8" NPT or BSPT (F) 3⁄8"-1⁄2" NPT or BSPT (F) 3⁄8" NPT or BSPT (M)
C
9
GENERAL PURPOSE
DESIGN FEATURES
Center-Post WhirlJet spray long service life and excellent They produce excellent results
nozzles feature a hollow cone spray pattern uniformity by in applications where quick heat
spray pattern with a ring-shaped precisely controlling the fluid vor- transfer or effective airborne
impact area. tex in the nozzle whirlchamber. droplet impingement is required.
They are molded in fiberglass WhirlJet spray nozzles feature 9360-AP series Center-Post
reinforced polypropylene for large unobstructed flow WhirlJet spray nozzles are
good strength and corrosion passages to minimize or elim- available with standard and
resistance at temperatures to inate clogging, as well as good wide spray caps and NPT or
160¡F (71¡C). atomization of liquids at lower BSPT (F) inlet connections.
pressures.
The Center-Post feature is an
innovation that provides extra-
COMMON APPLICATIONS
HOLLOW CONE
ⓦ Water cooling
ⓦ Aerating
ⓦ Wetting
ⓦ Chemical processes
COOLING
HEATED
JARS
ACCESSORIES
Adjustable 124
Split-Eyelet Connector Other Accessories
Ball Fittings Strainer
ⓦ Pressure Regulators
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Swivel Connectors
2-15 ⓦ ⓦ T\Á‰ QE\Á‰ .28 .33 .39 .55 .68 .78 .96 1.1 1.2 77° 100° 111°
2-20 ⓦ ⓦ T\Á‰ QT\Á‰ .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 81° 103° 113°
3-2 ⓦ ⓦ E\´„ T\Á‰ .18 .22 .26 .37 .45 .52 .64 .74 .82 58° 67° 76° DIMENSIONS & WEIGHTS
3 ⓦ ⓦ E\´„ E\´„ .21 .23 .30 .43 .52 .60 .73 .85 .95 55° 79° 80°
3-5 ⓦ ⓦ E\´„ U\Á‰ .25 .30 .36 .51 .62 .72 .88 1.0 1.1 72° 82° 86° Based on largest/heaviest version of each type.
3-8 ⓦ ⓦ E\´„ O\Á‰ .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 73° 88° 92°
3-10 ⓦ ⓦ E\´„ QQ\Á‰ .34 .40 .48 .68 .83 .96 1.2 1.4 1.5 81° 94° 97°
Part No. “A” “B” “C”
3-15 ⓦ ⓦ E\´„ QE\Á‰ .39 .46 .55 .78 .95 1.1 1.3 1.6 1.7 83° 93° 100°
3-20 ⓦ ⓦ E\´„ QT\Á‰ .44 .52 .62 .88 1.1 1.2 1.5 1.8 2.0 90° 100° 107° 9360-1/4AP-PP 1U\ŒÁ" 1" 1Q\‰"
5-2 ⓦ ⓦ O\Á‰ T\Á‰ .36 .51 .62 .72 .88 1.0 1.1 61° 67° 9360-3/8AP-PP 1QU\´„" 1E\´„" 1T\ŒÁ"
5-3 ⓦ ⓦ O\Á‰ E\´„ .34 .41 .58 .71 .82 1.0 1.2 1.3 57° 68° 69°
5 ⓦ ⓦ O\Á‰ U\Á‰ .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 70° 75° 79°
5-8 ⓦ ⓦ O\Á‰ O\Á‰ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 80° 78° 82°
5-10 ⓦ ⓦ O\Á‰ QQ\Á‰ .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 80° 87° 89° Part No. “A” “B” “C”
5-15 ⓦ ⓦ O\Á‰ QE\Á‰ .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 83° 91° 95° 9360-3/8LAP-PP 1WO\´„" 1O\´„" 1Q\„"
5-20 ⓦ ⓦ O\Á‰ QT\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 88° 98° 102° 9360-3/8LBP-PP 2E\ŒÁ" 1O\ŒÁ" 1Q\„"
8-5 ⓦ ⓦ QQ\Á‰ U\Á‰ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 60° 68° 71° 9360-1/2LAP-PP 2Q\´„" 1QE\´„" 1O\ŒÁ"
8 ⓦ ⓦ QQ\Á‰ O\Á‰ .44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 65° 72° 74°
8-10 ⓦ ⓦ QQ\Á‰ QQ\Á‰ .51 .66 .79 .94 1.3 1.6 1.9 2.3 2.7 3.0 73° 81° 81°
8-15 ⓦ ⓦ QQ\Á‰ QE\Á‰ .59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 78° 84° 87°
8-20 ⓦ ⓦ QQ\Á‰ QT\Á‰ .65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 84° 89° 92°
10-5 ⓦ ⓦ E\ŒÁ U\Á‰ .54 .65 .92 1.1 1.3 1.6 1.8 2.0 55° 64° 67°
10-8 ⓦ ⓦ E\ŒÁ O\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 60° 64° 66°
10 ⓦ ⓦ E\ŒÁ QQ\Á‰ .55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 70° 76° 75°
10-15 ⓦ ⓦ E\ŒÁ QE\Á‰ .67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 76° 81° 79°
HOLLOW CONE
10-20 ⓦ ⓦ E\ŒÁ QT\Á‰ .75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 78° 85° 98°
15-5 ⓦ ⓦ QT\Á‰ U\Á‰ .76 1.1 1.3 1.5 1.9 2.2 2.4 65° 60°
15-8 ⓦ ⓦ QT\Á‰ O\Á‰ .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 55° 68° 64°
15-10 ⓦ ⓦ QT\Á‰ QQ\Á‰ .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 65° 75° 71°
15 ⓦ ⓦ QT\Á‰ QE\Á‰ .82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 70° 72° 75°
15-20 ⓦ ⓦ QT\Á‰ QT\Á‰ .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 78° 80° 82°
GENERAL PURPOSE
3-10W ⓦ ⓦ E\´„ QQ\Á‰ .37 .44 .52 .74 .90 1.0 1.3 1.5 1.6 128° 130° 115°
3-15W ⓦ ⓦ E\´„ U\´„ .40 .47 .56 .79 .97 1.1 1.4 1.6 1.8 128° 130° 118°
3-20W ⓦ ⓦ E\´„ QT\Á‰ .42 .49 .59 .83 1.0 1.2 1.5 1.7 1.9 119° 134° 136°
5-5W ⓦ ⓦ O\Á‰ Q\ˆ .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 125° 112° 98°
5-8W ⓦ ⓦ O\Á‰ T\´„ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 125° 112° 97°
5-10W ⓦ ⓦ O\Á‰ QQ\Á‰ .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 125° 118° 102°
5-15W ⓦ ⓦ O\Á‰ U\´„ .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 130° 125° 105°
5-20W ⓦ ⓦ O\Á‰ QT\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 125° 125° 112°
8-5W ⓦ ⓦ QQ\Á‰ Q\ˆ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 119° 102° 99°
8-8W ⓦ ⓦ QQ\Á‰ T\´„ .44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 112° 100° 87°
8-10W ⓦ ⓦ QQ\Á‰ QQ\Á‰ .50 .64 .76 .91 1.3 1.6 1.8 2.2 2.6 2.9 115° 102° 90°
8-15W ⓦ ⓦ QQ\Á‰ U\´„ .59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 121° 110° 98°
8-20W ⓦ ⓦ QQ\Á‰ QT\Á‰ .65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 121° 113° 106°
10-5W ⓦ ⓦ E\ŒÁ Q\ˆ .54 .65 .92 1.1 1.3 1.6 1.8 2.0 115° 98° 85°
10-8W ⓦ ⓦ E\ŒÁ T\´„ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 110° 95° 84°
10-10W ⓦ ⓦ E\ŒÁ QQ\Á‰ .55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 111° 97° 89°
10-15W ⓦ ⓦ E\ŒÁ U\´„ .67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 113° 104° 97°
10-20W ⓦ ⓦ E\ŒÁ QT\Á‰ 75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 118° 107° 102°
15-5W ⓦ ⓦ QT\Á‰ Q\ˆ .76 1.1 1.3 1.5 1.9 2.2 2.4 91° 80°
15-8W ⓦ ⓦ QT\Á‰ T\´„ .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 102° 93° 80°
15-10W ⓦ ⓦ QT\Á‰ QQ\Á‰ .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 107° 97° 83°
15-15W ⓦ ⓦ QT\Á‰ U\´„ .82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 110° 98° 90°
15-20W ⓦ ⓦ QT\Á‰ QT\Á‰ .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 112° 105° 100°
HOLLOW CONE
NOZZLE Body CAPACITY SPRAY
TYPE Inlet Orifice
Capacity LAP LBP Diam. (gallons per minute) ANGLE
Diam.
Size NPT or NPT or
Nom. Nom. 3 5 7 10 20 30 40 60 80 100 7 20 80
BSPT (F) BSPT (M)
3/8 1/2 3/8 Inches Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
20-8W ⓦ Q\‰ QQ\Á‰ .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 99° 96° 86°
20-10W ⓦ Q\‰ E\ŒÁ .97 1.2 1.4 2.0 2.4 2.8 3.4 3.9 4.4 101° 98° 88°
20-15W ⓦ Q\‰ U\´„ .99 1.3 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 104° 100° 91°
20-20W ⓦ Q\‰ Q\‰ 1.1 1.4 1.7 2.0 2.8 3.5 4.0 4.9 5.6 6.3 106° 101° 93°
20-25W ⓦ Q\‰ O\´„ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 109° 104° 95°
20-40W ⓦ Q\‰ QQ\´„ 1.6 2.0 2.4 2.9 4.0 5.0 5.7 7.0 8.1 9.0 110° 107° 98°
20-50W ⓦ Q\‰ QE\´„ 1.9 2.5 2.9 3.5 4.9 6.1 7.0 8.5 9.9 11.0 111° 108° 100°
25-8W ⓦ O\´„ QQ\Á‰ 1.2 1.7 2.1 2.4 2.9 3.4 3.8 89° 78°
25-10W ⓦ O\´„ E\ŒÁ 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 100° 92° 81°
25-15W ⓦ O\´„ U\´„ 1.3 1.6 1.9 2.7 3.3 3.8 4.6 5.3 6.0 102° 96° 85°
25-20W ⓦ O\´„ Q\‰ 1.2 1.5 1.8 2.2 3.1 3.7 4.3 5.3 6.1 6.8 104° 99° 88°
25-25W ⓦ O\´„ O\´„ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 107° 102° 91°
25-40W ⓦ O\´„ QQ\´„ 1.7 2.2 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 109° 105° 94°
25-50W ⓦ O\´„ QE\´„ 2.1 2.8 3.3 3.9 5.5 6.8 7.8 9.6 11.0 12.3 110° 108° 99°
40-10W ⓦ ⓦ ⓦ WE\Á‰ E\ŒÁ 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 95° 85° 80°
40-15W ⓦ ⓦ ⓦ WE\Á‰ U\´„ 1.3 1.7 2.0 2.4 3.4 4.2 4.9 5.9 6.9 7.7 97° 88° 82°
40-20W ⓦ ⓦ ⓦ WE\Á‰ Q\‰ 1.5 1.9 2.2 2.7 3.8 4.6 5.3 6.5 7.5 8.4 100° 94° 88°
40-25W ⓦ ⓦ ⓦ WE\Á‰ O\´„ 1.8 2.3 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 103° 97° 91°
40-40W ⓦ ⓦ ⓦ WE\Á‰ QQ\´„ 2.2 2.8 3.3 4.0 5.7 6.9 8.0 9.8 11.3 12.6 106° 99° 93°
40-50W ⓦ ⓦ ⓦ WE\Á‰ QE\´„ 2.8 3.6 4.2 5.0 7.1 8.7 10.0 12.3 14.1 15.9 109° 101° 96°
For other capacity sizes see Data Sheet 9360-2.
ORDERING INFORMATION
STANDARD
SPRAY NOZZLE
9360-3/8 AP- PP 3
Inlet Nozzle Material Capac-
Connec- Type Code ity
tion Size
Pipe
Size
SPRAY NOZZLES
IN-LINE SERIES
BD
removable cap
3⁄8"-11⁄2" NPT or BSPT (M)
C
12
GENERAL PURPOSE
NPT or Diam.
Size Nom. Nom. 3 5 7 10 15 20 30 40 60 80 100 7 20 80
BSPT (M) BD 38
⁄ BD— 1E\´„" 1Q\‰" QQ\ŒÁ" Hex. 1 oz.
Inches Inches psi psi psi psi psi psi psi psi psi psi psi psi psi psi 12
⁄ BD— 1O\´„" 1QT\´„" U\ˆ" Hex. 2 oz.
ⓦ 2 E\´„ T\Á‰ .20 .25 .28 .35 .40 .48 .56 .63 60° 70° 34
⁄ BD— 1Q\„" 1E\‰" 1Q\ŒÁ" Hex. 4 oz.
ⓦ 3 E\´„ E\´„ .21 .25 .30 .37 .42 .52 .60 .73 .85 .95 52° 64° 77° 11⁄2BD— 2E\ˆ" 2T\ˆ" 2" Hex. 21 oz.
3/8 ⓦ 5 U\Á‰ Q\ˆ .35 .42 .50 .61 .70 .86 1.0 1.2 1.4 1.6 56° 67° 76°
ⓦ 8 T\´„ T\´„ .56 .66 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 56° 65° 70°
ⓦ 10 T\´„ QQ\Á‰ .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 55° 65° 72°
ⓦ 20-10 *T\´„ QQ\Á‰ .97 1.1 1.4 1.7 1.9 2.4 2.7 3.3 3.8 4.3 61° 65° 67°
ⓦ 5 Q\ˆ O\Á‰ .35 .42 .50 .61 .70 .86 1.0 1.2 1.4 1.6 63° 73° 79°
ⓦ 8 T\´„ T\´„ .56 .66 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 61° 69° 73°
1/2 ⓦ 10 QQ\Á‰ QQ\Á‰ .55 .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 63° 70° 74°
ⓦ 15 *QQ\Á‰ QE\Á‰ .82 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 60° 67° 70°
ⓦ 20 *E\ŒÁ QT\Á‰ 1.1 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 63° 65° 69°
ⓦ 25 *QE\Á‰ O\´„ 1.4 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 59° 63° 68°
ⓦ 5 O\Á‰ Q\ˆ .27 .35 .42 .50 .61 .70 .86 1.0 1.2 1.4 1.6 64° 73° 79°
ⓦ 8 QQ\Á‰ T\´„ .44 .56 .66 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 62° 70° 74°
ⓦ 10 QE\Á‰ QQ\Á‰ .55 .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 64° 72° 75°
3/4 ⓦ 15 Q\‰ U\´„ .82 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 64° 72° 74°
ⓦ 20 O\´„ Q\‰ 1.1 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 63° 70° 74°
ⓦ 25 O\´„ QO\Á‰ 1.4 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 63° 70° 74°
ⓦ 50-50.3 *O\´„ E\ˆ 2.7 3.5 4.2 5.0 6.0 7.0 8.5 10.0 12.2 14.1 15.8 70° 72° 73°
ⓦ 40 *E\ˆ T\ŒÁ 2.2 2.8 3.3 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 70° 73° 74° ORDERING INFORMATION
ⓦ 50 *E\ˆ E\ˆ 2.7 3.5 4.2 5.0 6.1 7.1 8.7 10 12.3 14.2 15.8 72° 75° 77°
ⓦ
ⓦ
60
70
*E\ˆ
*E\ˆ
U\ŒÁ
Q\„
3.3
3.8
4.3 5.0 6.0 7.4 8.5
5.0 5.8 7.0 8.6 9.9
10.4
12.1
12 14.7 17.0 19 74° 76° 79°
14 17.1 19.8 22 76° 79° 83° 3/8 BD - SS 10
1-1/2 ⓦ 80 *E\ˆ O\ŒÁ 4.4 5.7 6.7 8.0 9.8 11.3 13.9 16 19.6 23 25 78° 82° 84°
ⓦ 90 *E\ˆ EU\Á‰ 4.9 6.4 7.5 9.0 11.0 12.7 15.6 18 22 25 29 81° 84° 84° Inlet Nozzle Material Capacity
ⓦ 100 *E\ˆ T\ˆ 5.5 7.1 8.4 10.0 12.2 14.1 17.3 20 25 28 32 83° 86° 86° Connection Type Code Size
ⓦ 110 *E\ˆ RE\Á‰ 6.0 7.8 9.2 11.0 13.5 15.5 19.0 22 27 31 35 85° 88° 88° Pipe
ⓦ 120 *E\ˆ WE\´„ 6.6 8.5 10.1 12.0 14.7 17.0 21 24 29 34 38 87° 90° 90° Size
Standard
Materials Material Code *Dual inlets, each in diameter specified.
Q no material code = Brass
Q SS = 303 Stainless Steel
“MINER NOZZLES”
GENERAL PURPOSE
ⓦ 20-10 QQ\Á‰ 1.4 1.9 2.7 4.3 6.0 7.4 8.5 9.5 61° 60° 49°
DESIGN FEATURES
The BDM series features a
bright yellow fiberglass rein-
forced nylon inlet body, a more ORDERING INFORMATION
recessed spray cap to protect
the orifice area from damage 3/8 BDM - 5
and self-locking thread to pre-
Inlet Nozzle Capacity
vent cap loss due to vibration. Connection Type Size
Pipe Size
Maximum recommended
operating pressure is 500 psi
(34 bar).
HOLLOW CONE
SPRAY NOZZLES
30° ANGLE SPRAY
G H H
three-piece nozzle two-piece nozzle three-piece cast type nozzle
NPT or BSPT (F) NPT or BSPT (F) NPT or BSPT (F)
DESIGN FEATURES
A complete selection of in-line with uniform distribution. Bar
hollow cone spray nozzles stock sizes available in brass,
producing narrow angle spray. mild steel or 303 stainless
Capacity selection from 1.5 - steel…larger cast type sizes in
4930 gpm (5.7 to 18,600 l/min). brass or 316 stainless steel.
Designed with an internal vane See Data Sheet 7120.
to produce hollow cone spray
SPRAY NOZZLES
HIGH PRESSURE
TUNGSTEN CARBIDE
TYPICAL SSTC PARTS
AASSTC BBSSTC AAASSTC
in-line spray angle-type spray angle-type spray
14
⁄ "-1⁄2" NPT or BSPT (F) 38
⁄ " NPT or BSPT (M) 12
⁄ " NPT or BSPT (F)
C BODY
14
ORIFICE INSERT
GENERAL PURPOSE
SPRING
GASKET
SLOPE-BOTTOM WHIRLCHAMBER
INSERT
DIMENSIONS & WEIGHTS
Based on largest/heaviest version of each type.
INLET CONN.
A Net
Nozzle Type Male NPT Female NPT B C D H CAP WITH ORIFICE INSERT
Hex. Weight
or BSPT or BSPT
14
⁄ AASSTC 14
⁄" 1E\ˆ" 2O\´„" 121⁄2 oz.
38
⁄ AASSTC 38
⁄" 1E\ˆ" 2O\´„"
1⁄2 AASSTC 1⁄2" 1E\ˆ" 2O\´„" 121⁄2 oz.
3⁄8 BBSSTC 38
⁄" 2" T\ˆ" 1E\ˆ" 2E\´„" 141⁄2 oz.
1⁄2 AAASSTC 12
⁄" 2" T\ˆ" 1E\ˆ" 2E\´„" 1 lb.
104-1⁄4 AA 14
⁄" 1E\‰" 2QQ\´„"
104-3⁄8 AA 3⁄8" 1E\‰" 2QQ\´„" 1Q\‰ lbs.
104-1⁄2 AA 1⁄2" 1E\‰" 2QQ\´„"
104-3⁄8 B 38
⁄" 2Q\„" U\ˆ" 1T\ˆ" 2U\´„" 1Q\„ lbs.
104-1⁄2 A 12
⁄" 2T\ŒÁ" U\ˆ" 1U\ŒÁ" 2U\´„" 1E\‰ lbs.
PERFORMANCE DATA
Nozzle NOZZLE TYPE CAPACITY (gallons per minute)
Inlet Capacity Orifice and SPRAY ANGLE
Conn. 104 SSTC Diam.
NPT or Size Inches 40 60 80 100 150 200 300 500 750 1,000 1,500 2,000 2,500 3,000 4,000 5,000
BSPT A B AA AA BB AAA psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
1/4
3/8
1/2
1
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
.055
.17
68°
.21
72°
.24
73°
.27
74°
.33
75°
.38
76°
.46
71°
.60
67°
.74
62°
.85 1.04 1.20 1.34 1.48 1.70 1.90
57° 55° 53° 51° 50° 48° 46°
C
1/4 ⓦ ⓦ
15
.27 .32 .37 .42 .52 .60 .73 .94 1.15 1.33 1.63 1.88 2.10 2.30 2.66 2.97
3/8 1.5 ⓦ ⓦ ⓦ ⓦ .070
78° 82° 83° 84° 80° 77° 75° 72° 65° 59° 57° 55° 53° 51° 49° 47°
1/2 ⓦ ⓦ ⓦ ⓦ
GENERAL PURPOSE
1/4 ⓦ ⓦ .34 .41 .48 .53 .66 .75 .92 1.19 1.46 1.69 2.07 2.39 2.67 2.93 3.38 3.78
3/8 2 ⓦ ⓦ ⓦ ⓦ .078
77° 81° 81° 81° 80° 79° 73° 68° 62° 57° 55° 53° 51° 50° 48° 46°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ .52 .64 .74 .82 1.01 1.16 1.43 1.84 2.24 2.60 3.18 3.68 4.11 4.50 5.20 5.81
3/8 3 ⓦ ⓦ ⓦ ⓦ .094
78° 79° 79° 78° 77° 76° 67° 59° 53° 48° 46° 44° 41° 39° 37° 35°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ .66 .81 .93 1.04 1.28 1.48 1.81 2.34 2.85 3.30 4.04 4.67 5.22 5.72 6.60 7.38
3/8 4 ⓦ ⓦ ⓦ ⓦ .109
76° 76° 77° 78° 77° 76° 67° 59° 53° 48° 46° 44° 41° 38° 35° 33°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ .85 1.04 1.20 1.34 1.64 1.90 2.32 2.99 3.65 4.23 5.18 5.98 6.69 7.33 8.46 9.46
3/8 5 ⓦ ⓦ ⓦ ⓦ .129
91° 91° 88° 86° 82° 79° 71° 63° 56° 50° 46° 45° 43° 40° 37° 34°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ 1.01 1.23 1.42 1.59 1.96 2.26 2.76 3.56 4.36 5.04 6.17 7.13 7.97 8.73 10.1 11.3
3/8 6 ⓦ ⓦ ⓦ ⓦ .136
89° 89° 86° 83° 80° 78° 69° 61° 56° 52° 48° 46° 43° 42° 40° 38°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ 1.09 1.33 1.53 1.72 2.12 2.44 2.98 3.86 4.69 5.45 6.67 7.71 8.62 9.44 10.9 12.2
3/8 7 ⓦ ⓦ ⓦ ⓦ .141
ⓦ ⓦ ⓦ
91° 88° 85° 83° 80° 78° 69° 60° 59° 58° 55° 53° 51° 48° 45° 42°
1/2 ⓦ
1/4 ⓦ ⓦ 1.36 1.66 1.92 2.14 2.64 3.02 3.72 4.79 5.84 6.79 8.32 9.60 10.7 11.8 13.6 15.2
3/8 8 ⓦ ⓦ ⓦ ⓦ .156
92° 89° 86° 83° 78° 74° 65° 57° 54° 52° 51° 50° 48° 46° 44° 42°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ 1.81 2.21 2.66 2.86 3.51 4.05 4.95 6.40 7.78 9.05 11.1 12.8 14.3 15.7 18.1 20.2
3/8 10 ⓦ ⓦ ⓦ ⓦ .177
94° 87° 85° 83° 79° 75° 67° 59° 57° 55° 48° 46° 44° 42° 40° 38°
1/2 ⓦ ⓦ ⓦ ⓦ
HOLLOW CONE
1/4 ⓦ ⓦ 2.93 3.60 4.13 4.62 5.67 6.55 8.02 10.3 12.6 14.6 17.9 20.6 23.1 25.3 29.2 32.6
3/8 15 ⓦ ⓦ ⓦ ⓦ .213
86° 82° 80° 78° 73° 68° 60° 52° 51° 50° 46° 44° 43° 40° 36° 32°
1/2 ⓦ ⓦ ⓦ ⓦ
1/4 ⓦ ⓦ 4.50 5.50 6.35 7.10 8.74 10.1 12.3 15.9 19.4 22.5 27.6 31.8 35.6 39.0 45.0 50.3
3/8 20 ⓦ ⓦ ⓦ ⓦ .250
80° 80° 80° 80° 72° 64° 55° 47° 46° 45° 42° 39° 37° 35° 32° 30°
1/2 ⓦ ⓦ ⓦ ⓦ
ORDERING INFORMATION
COMPLETE NOZZLE
ASSEMBLY
WHIRLCHAMBER
NOZZLE ORIFICE INSERT COMPLETE NOZZLE
BODY COMBINATION ASSEMBLY
ⓦ 20 O\´„ Q\‰ 1.4 2.0 2.8 4.0 4.9 6.3 63° 70° 74°
ⓦ 25 QO\Á‰ QO\Á‰ 1.8 2.5 3.5 5.0 6.1 7.9 63° 70° 74°
DESIGN FEATURES DIMENSIONS & WEIGHTS ⓦ 25 E\ˆ Q\‰ 1.8 2.5 3.5 5.0 6.1 7.9 63° 66° 71°
ⓦ 30 E\ˆ QO\Á‰ 2.1 3.0 4.2 6.0 7.3 9.5 67° 71° 75°
Offset type WhirlJet spray Based on largest/heaviest version of each type. 1/2 ⓦ 40 E\ˆ WE\Á‰ 2.8 4.0 5.7 8.0 9.8 12.6 72° 76° 78°
nozzles feature a hollow cone ⓦ 50 E\ˆ U\ŒÁ 3.5 5.0 7.1 10.0 12.3 15.8 74° 79° 82°
ⓦ 60 E\ˆ EE\Á‰ 4.2 6.0 8.5 12.0 14.7 19.0 77° 82° 86°
spray pattern with a ring-shaped
Standard
impact area. Materials Material Code
The caps are interchangeable Q no material code = Brass
within each pipe size group and Q SS = 303 Stainless Steel
Q 309SS = 309 Stainless Steel
wide angle caps are also avail-
able. Write for Data Sheet 14385 NPT or
for specifications. BSPT A B C Net ORDERING INFORMATION
Size Weight
Typical applications include
sulphur burning.
38
⁄ WQ\´„" 1O\ŒÁ" 1Q\„" 4 oz. 1/2 BA - SS 25
12
⁄ 1" 2" 2O\´„" 9Q\„ oz.
Inlet Nozzle Material Capac-
Performance features include Connec- Type Code ity
small droplet size and large, tion Size
Pipe
unobstructed, flow passages. Size
HOLLOW CONE
SPRAY NOZZLE
DEFLECTED SPRAY TYPE
C
17
GENERAL PURPOSE
Flow capacity at 40 psi (3 bar) They can also be produced from
DESIGN FEATURES ranges from 1.4 to 1050 gpm a wide variety of other materials
The Type BSJ nozzle produces (5.5 to 4140 l/min.). for specific applications.
a hollow cone spray pattern with Sizes 1⁄4) to 2) are available in
spray angles ranging from 50° to brass, cast 316 stainless steel,
an extra wide angle of 180°. and TEFLON or PVC materials.
These compact nozzles permit Brass version is available with
COMMON APPLICATIONS maximum liquid throughput for a hex design. Stainless steel with
ⓦ Flue gas desulphurization given pipe size, and the free flats. TEFLON and PVC nozzles ACCESSORIES
passage design minimizes with rounded design. In the
ⓦ Gas cooling Adjustable Ball Fittings
clogging. The compact size can larger 3) and 4) sizes, both
ⓦ Evaporative cooling be installed or retrofitted on most brass and stainless steel are
pipe systems, available in NPT
HOLLOW CONE
ⓦ Dust suppression available with “flats” only.
or BSPT (M) threads.
PERFORMANCE DATA
CAPACITY Split-Eyelet Connector
Pipe Size Spray Angle at 10 psi Free
Capacity Orifice (gallons per minute) Nozzle
NPT or Passage
BSPT (M) 50° 60° 90° 120° 180°
Size Diam.
Diam. 10 20 40 100 400** Length
psi psi psi psi psi
ⓦ ⓦ ⓦ ⓦ 07 ⁄ )
3 32 ⁄ )
3 32 .7 .99 1.4 2.2 4.4
1/4 ⓦ ⓦ ⓦ ⓦ ⓦ 13 ⁄)
18 18⁄) 1.3 1.8 2.6 4.1 8.2 17⁄8)
ⓦ ⓦ ⓦ ⓦ ⓦ 20 5⁄32) 1⁄8) 2.0 2.8 4.0 6.3 12.6
ⓦ ⓦ ⓦ ⓦ ⓦ 30 3⁄16) 1⁄8) 3.0 4.2 6.0 9.5 19.0
ⓦ ⓦ ⓦ ⓦ ⓦ 40 7⁄32) 1⁄8) 4.0 5.7 8.0 12.6 25
3/8 17⁄8)
ⓦ ⓦ ⓦ ⓦ ⓦ 53 1⁄4) 1⁄8) 5.3 7.5 10.6 16.8 34 Other Accessories
ⓦ ⓦ ⓦ ⓦ ⓦ 82 5⁄16) 1⁄8) 8.2 11.6 16.4 26 52 ⓦ Pressure Regulators
ⓦ ⓦ ⓦ ⓦ ⓦ 120 3⁄8) 3⁄16) 12.0 17.0 24 38 76
1/2 2 1⁄2) ⓦ Control Valves
ⓦ ⓦ ⓦ ⓦ ⓦ 164 7⁄16) 3⁄16) 16.4 23 33 52 104
3/4 ⓦ ⓦ ⓦ ⓦ ⓦ 210 1⁄2) 3⁄16) 21 30 42 66 133 2 3⁄4) ⓦ Solenoid Valves
ⓦ ⓦ ⓦ ⓦ 340 5⁄8) 1⁄4) 34 48 68 108 215
1 3 5⁄8) ⓦ Swivel Connectors
ⓦ ⓦ ⓦ ⓦ 470 3⁄4) 1⁄4) 47 66 94 149 297
ⓦ ⓦ ⓦ ⓦ 640 7⁄8) 5⁄16) 64 91 128 202 405 SEE SECTION G FOR
COMPLETE INFORMATION.
1-1/2 ⓦ ⓦ ⓦ ⓦ 820 1) 5⁄16) 82 116 164 259 519 4 3⁄8)
ⓦ ⓦ ⓦ ⓦ 960 11⁄8) 5⁄16) 96 136 192 304 607
ⓦ ⓦ ⓦ ⓦ 1400 13⁄8) 7⁄16) 140 198 280 443 885
2 6 7⁄8)
ⓦ ⓦ ⓦ ⓦ 1780 11⁄2) 7⁄16) 178 252 356 563 1125
ORDERING INFORMATION
ⓦ ⓦ ⓦ 2560 13⁄4) 9⁄16) 256 362 512 810 1620
3 8)
ⓦ ⓦ ⓦ 3360 2) 9⁄16) 336 475 672 1060 2120 COMPLETE NOZZLE
ⓦ
NUMBER
4 ⓦ ⓦ 5250 21⁄2) 5⁄8) 525 743 1050 1660 3320 9)
**At higher pressures, Brass and Cast Material Material Code 1/4 BSJ - SS 120 07
316 Stainless Steel nozzles are required. Q no material code = Brass
Q SS = Cast 316 Stainless Steel
Pipe Nozzle Material Spray Capac–
Size Type Code Angle ity
Q TEF = TEFLON Size
Q PVC = Polyvinyl Chloride
SPRAY NOZZLE
HOLLOW CONE FLANGE-TYPE NOZZLES
BFSJ
2), 3) & 4) sizes
C
18
GENERAL PURPOSE
PERFORMANCE DATA
CAPACITY Standard Materials
Spray Angle at 10 psi Free Reaction-bonded Silicon Carbide with
Connection Capacity Orifice (gallons per minute)
Passage F.R.P. Flange.
Size Size Diam. 10 20 40 100 400
60° 90° 120° 180° Diam. Material Code
psi psi psi psi psi SILCRB = Reaction-bonded
Silicon Carbide
2) ⓦ ⓦ ⓦ ⓦ 1400 13⁄8) ⁄ )
7 16 140 198 280 443 885
Flange ⓦ ⓦ ⓦ ⓦ 1780 11⁄2) ⁄ )
7 16 178 252 356 563 1125
3) ⓦ ⓦ ⓦ 2560 13⁄4) 9⁄16) 256 362 512 810 1620
9⁄16)
Flange ⓦ ⓦ ⓦ 3360 2) 336 475 672 1060 2120
4) Flange ⓦ ⓦ ⓦ 5250 21⁄2) 5⁄8) 525 743 1050 1660 3320
INDEX
FullJet®
Standard Spray Angle G, GG, H, HH...C20, C22,C23
Wall Mounted GD, GGD, HD......... C21-C23
Angle Type GA, GGA................ C21-C23
Square Spray G-SQ, GG-SQ,
H-SQ, HH-SQ........ C24, C25
Oval Spray G-VL, GG-VL.................. C26
Vaneless GANV, GGANV............... C27
DistriboJet® R, RR, RF.............. C28, C29
FullJet®
Narrow Angle -15° G15, GG15, H15............ C30
Narrow Angle -30° G30, GG30, HH30......... C31
Wide Angle G-W, GG-W,
H-W, HH-W............. C32-C34
Square Spray, Wide H-WSQ,
HH-WSQ............... C33, C34
Angle Type GA-W, GGA-W...... C33, C34
FullJet®
KYNAR Series HH-KY............................ C35
SpiralJet®
SpiralJet® Threaded HHSJ............................. C36
SpiralJet® Flanged HFSJ.............................. C37
SpiralJet®
Extra Large
Free Passage HHSJX.............................C38
SPRAY NOZZLES
STANDARD SPRAY ANGLE
STANDARD TYPE
G GG H HH
removable cap & vane removable cap & vane one-piece body one-piece body
1⁄8"-1⁄2" NPT or BSPT (F) 1⁄8"-1⁄2" NPT or BSPT (M) 3⁄4"-1" NPT or BSPT (F) 1⁄4"-1" NPT or BSPT (M)
C
20
GENERAL PURPOSE
H
removable vane/ mance. They produce excellent
cast body results in spraying applications
11⁄4"- 8" NPT or BSPT (F) requiring complete coverage of
an area or zone.
G and GG series FullJet nozzles
feature removable caps and
vanes and are well-suited for
header or manifold installations.
Their design makes it possible to
remove the working end (cap &
vane) from the nozzle for inspec-
tion or cleaning, without having
to remove the nozzle body from
the header.
H series Standard FullJet
DESIGN FEATURES nozzles (over 1") have vanes
FULL CONE
C
21
GENERAL PURPOSE
The wall mounting feature is Angle Type FullJet nozzles all
➚ FullJet Nozzle
Wall Mounted useful for installations where the
DESIGN FEATURES have removable caps and vanes
piping for the nozzles must be Angle Type FullJet nozzles for convenient inspection or
installed on the exterior of the feature a solid cone-shaped cleaning.
room, vessel, or pipeline into spray pattern with a round The right angle design is useful
which the nozzle will spray. impact area with the same wherever FullJet nozzles must
performance as Standard FullJet
➚
FULL CONE
performance as Standard FullJet COMMON APPLICATIONS
nozzles of similar size and ⓦ Spraying into chemical ⓦ Spraying into steam and
capacity. reaction vessels gas lines
Their wall mounting connection HD series Wall Mounted FullJet
ⓦ Spraying into storage tanks
is a male type pipe connection nozzles feature removable
and bins
the same size as the inlet vanes for sizes 1!\›" through 3".
connection.
FURNACE
EXHAUST GAS LINE
LINE
ACCESSORIES
Split-Eyelet Adjustable
TW Strainer Other Accessories
Connector Ball Fittings
ⓦ Pressure Gauges
ⓦ Pressure Regulators
ⓦ Pressure Relief Valves
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Check Valves
SEE SECTION G FOR
COMPLETE INFORMATION.
PERFORMANCE DATA
NOZZLE TYPE
Nozzle WALL Maxi-
STANDARD TYPE ANGLE Orifice mum CAPACITY SPRAY
Inlet MOUNTED Capac- Diam. Free (gallons per minute) ANGLE
Conn. ity Nom. Passage
(F) (M) (F) (M) (F) (M) Size
NPT or * Inches Diam.**
Conn. Conn. Conn. Conn. Conn. Conn.
BSPT Inches
5 7 10 20 30 40 60 80 100 150 7 20 80
G H GG HH HF GD HD GGD GA GGA psi psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ ⓦ ⓦ ⓦ 1
⁄
32 .025 .10 .14 .17 .19 .23 .26 .30 .36 58° 53°
ⓦ ⓦ ⁄
3 64 .025 .13 .15 .21 .25 .29 .35 .40 .44 .53 52° 65° 59°
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⁄
3 64 .040 .14 .17 .20 .28 .34 .38 .46 .53 .59 .70 43° 50° 46°
C 1/8 ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
1⁄16
1⁄16
5⁄64
.040
.050
.040
.22
.25
.28
.26
.30
.33
.30
.35
.39
.42
.48
.54
.50
.58
.65
.57
.67
.74
.69
.81
.89
.79
.92
1.0
.88
1.0
1.1
1.1
1.3
52°
43°
77°
65°
50°
84°
59°
46°
79°
22 ⓦ ⓦ ⓦ ⓦ ⓦ
ⓦ
ⓦ
ⓦ
5⁄64
3⁄32
.050
.050
.36
.44
.42
.52
.50
.61
.69
.84
.82
1.0
.95
1.1
1.2
1.4
1.3
1.6
1.5
1.8
1.8 52°
69°
65°
74°
59°
68°
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 3⁄32 1
⁄16 .47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3 45° 50° 46°
1/4 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
GENERAL PURPOSE
7⁄64 1⁄16
.73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6 58° 67° 61°
ⓦ ⓦ 1 ⁄8 1⁄16
.91 1.1 1.25 1.7 2.1 2.4 2.9 3.3 3.6 69° 74° 68°
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 7⁄64 3⁄32
.69 .80 .95 1.3 1.6 1.8 2.2 2.5 2.8 3.4 45° 50° 46°
3/8 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 9⁄64 3⁄32
1.1 1.3 1.5 2.1 2.5 2.9 3.5 4.0 4.4 5.3 64° 67° 61°
ⓦ ⓦ 5⁄32 7⁄64
1.5 1.7 2.0 2.8 3.4 3.8 4.6 5.3 5.9 76° 80° 73°
ⓦ ⓦ ⓦ ⓦ ⓦ 3⁄16 7⁄64
1.6 1.9 2.2 3.0 3.7 4.2 5.1 5.8 6.4 7.8 87° 90° 82°
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 9⁄64 1 ⁄8
1.2 1.4 1.6 2.2 2.7 3.1 3.7 4.3 4.7 5.7 48° 50° 46°
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 3⁄16 1 ⁄8
1.8 2.1 2.5 3.5 4.2 4.8 5.8 6.7 7.4 8.9 64° 67° 61°
1/2 ⓦ ⓦ ⓦ ⓦ 13⁄64 9⁄64
2.3 2.7 3.2 4.4 5.3 6.1 7.4 8.5 9.4 11.3 72° 75° 68°
ⓦ ⓦ ⓦ ⓦ ⓦ 1 ⁄4 9⁄64
2.9 3.2 4.0 5.5 6.6 7.6 9.2 10.6 11.8 14.3 88° 91° 83°
ⓦ ⓦ 17⁄64 5⁄32
3.6 4.2 5.0 6.9 8.2 9.5 11.6 13.2 14.7 91° 94° 86°
ⓦ ⓦ 3⁄16 11⁄64
2.1 2.5 3.0 4.1 4.9 5.6 6.8 7.8 8.6 10.4 48° 50° 46°
3/4 ⓦ ⓦ ⓦ 1 ⁄4 11⁄64
3.4 4.0 4.7 6.5 7.8 8.9 10.7 12.4 13.7 16.6 67° 70° 63°
ⓦ ⓦ ⓦ 3 ⁄8 13⁄64
6.0 7.0 8.3 11.4 13.8 15.8 19.1 22 24 29 89° 92° 84°
ⓦ ⓦ 15⁄64 7⁄32
3.6 4.2 5.0 6.8 8.2 9.4 11.5 13.1 14.5 17.6 48° 50° 46°
ⓦ ⓦ ⓦ 21⁄64 7⁄32
6.0 7.0 8.3 11.4 13.8 15.8 19.1 22 24 29 67° 68° 62°
1 ⓦ ⓦ ⓦ 3 ⁄8 7⁄32
6.9 8.0 9.4 13.0 15.6 17.8 21 25 27 33 72° 81° 82°
ⓦ ⓦ 15⁄32 7⁄32
8.6 10.0 12.0 16.5 19.9 23 27 31 35 42 78° 90° 94°
ⓦ ⓦ 15⁄32 1 ⁄4
10.2 12.0 14.2 19.4 24 27 32 37 41 50 89° 92° 84°
ⓦ 19⁄64 1 ⁄4
5.1 6.0 7.1 9.7 11.8 13.5 16.3 18.6 21 25 48° 50° 44°
ⓦ 3 ⁄8 1 ⁄4
8.7 10.0 12.0 16.5 19.9 23 27 31 35 42 64° 67° 58°
1-1/4 ⓦ ⓦ 27⁄64 1 ⁄4
10.2 12.0 14.1 19.4 24 27 33 37 41 50 66° 70° 60°
ⓦ ⓦ 31⁄64 1 ⁄4
12.0 14.0 16.5 23 27 32 38 41 48 58 77° 80° 70°
ⓦ 19⁄32 5⁄16
17.2 20 24 33 39 44 53 61 68 82 90° 93° 81°
ⓦ 3 ⁄8 11⁄32
8.7 10.0 12.0 16.5 19.9 23 27 31 35 42 48° 50° 44°
1-1/2 ⓦ 1 ⁄2 11⁄32
13.7 16.0 18.9 26 31 35 43 49 54 66 72° 74° 64°
ⓦ ⓦ 9⁄16 11⁄32
17.2 20 24 33 39 44 53 61 68 82 74° 76° 66°
FULL CONE
ⓦ ⓦ 23⁄32 13⁄32
26 30 36 48 58 66 80 91 102 123 91° 94° 82°
ⓦ 1 ⁄2 7⁄16
15 17 20 27 33 38 45 52 63 76 49° 50° 44°
ⓦ 11⁄16 7⁄16
26 30 36 48 58 66 80 91 102 123 72° 74° 64°
2 ⓦ ⓦ 3 ⁄4 7⁄16
30 35 42 57 68 76 93 108 121 147 75° 77° 68°
ⓦ ⓦ 53⁄64 7⁄16
34 40 47 64 77 88 108 124 137 166 78° 80° 70°
ⓦ ⓦ 15⁄16 9⁄16
43 50 59 82 99 113 135 156 173 210 83° 85° 75°
ⓦ 11⁄8 9⁄16
51 60 71 96 118 140 163 186 203 250 98° 100° 86°
ⓦ ⓦ 19⁄32 9⁄16
21 25 30 41 49 56 68 78 86 104 49° 50° 44°
ⓦ ⓦ 7 ⁄8 9⁄16
43 50 59 81 97 112 135 155 172 208 72° 74° 64°
2-1/2 ⓦ ⓦ 31⁄32 9⁄16
51 60 71 96 118 140 163 186 203 250 76° 78° 68°
ⓦ ⓦ 11⁄8 9⁄16
60 70 83 115 138 158 191 219 243 294 79° 82° 72°
ⓦ ⓦ 11⁄8 11⁄16
69 80 95 132 160 183 220 253 280 339 86° 88° 77°
ⓦ 11⁄4 11⁄16
77 90 108 148 180 202 248 282 316 383 95° 97° 84°
ⓦ 3 ⁄4 11⁄16
36 42 50 69 82 94 105 131 145 176 49° 50° 44°
ⓦ ⓦ 13⁄32 11⁄16
69 80 95 132 160 183 220 253 280 339 81° 84° 73°
3 ⓦ ⓦ 1 ⁄16
3 11⁄16
77 90 108 148 180 202 248 282 316 383 86° 89° 77°
ⓦ ⓦ 19⁄32 11⁄16
86 100 119 164 198 228 274 314 349 419 92° 95° 83°
ⓦ ⓦ 13⁄8 13⁄16
102 120 142 194 235 269 324 370 411 500 102° 105° 89°
ⓦ ⓦ 111⁄16 3 ⁄4
137 160 189 260 311 354 428 487 540 655 87° 90° 70°
4 ⓦ ⓦ 155⁄64 7 ⁄8
154 180 212 292 351 403 485 552 615 745 92° 95° 83°
ⓦ ⓦ 2 1 172 200 238 325 390 443 533 610 675 820 97° 100° 87°
ⓦ ⓦ 25⁄32 1 180 210 250 345 420 480 580 665 740 895 102° 105° 91°
ⓦ ⓦ 17⁄8 11⁄8 213 250 298 408 490 561 678 775 860 1040 89° 91° 80°
5 ⓦ ⓦ 25⁄64 11⁄8 240 280 330 452 546 625 751 860 955 1150 93° 96° 84°
ⓦ ⓦ 2 ⁄16
11
13⁄8 272 320 378 519 621 710 858 980 1100 1330 97° 100° 87°
ⓦ ⓦ 227⁄32 13⁄8 281 330 390 534 640 732 885 1020 1140 1380 102° 105° 91°
ⓦ ⓦ 213⁄32 15⁄8 301 350 413 568 680 775 932 1080 1210 1470 87° 90° 78°
6 ⓦ ⓦ 223⁄32 15⁄8 341 400 470 643 770 883 1080 1240 1370 1660 92° 95° 83°
ⓦ ⓦ 31⁄32 13⁄4 387 450 531 730 880 1010 1230 1400 1550 1880 97° 100° 87°
ⓦ ⓦ 37⁄32 13⁄4 412 480 569 780 940 1080 1310 1490 1670 2040 102° 105° 91°
ⓦ ⓦ 23⁄4 17⁄8 425 500 590 815 985 1130 1370 1560 1730 2100 78° 80° 70°
ⓦ ⓦ 35⁄32 17⁄8 512 600 708 960 1180 1400 1630 1860 2030 2500 86° 88° 77°
8 ⓦ ⓦ 319⁄32 17⁄8 600 700 830 1150 1380 1580 1910 2190 2430 2940 92° 95° 83°
ⓦ ⓦ 41⁄32 21⁄4 685 800 949 1320 1600 1830 2200 2530 2800 3390 102° 105° 91°
ⓦ ⓦ 47⁄8 21⁄4 772 900 1080 1480 1800 2020 2480 2820 3160 3830 106° 110° 96°
ⓦ 3 ⁄32
11
21⁄2 685 800 949 1320 1600 1830 2200 2530 2800 3390 78° 80° 70°
10 ⓦ 331⁄32 21⁄2 850 1000 1180 1630 1970 2260 2740 3130 3470 4200 86° 89° 77°
ⓦ 451⁄64 25⁄8 1030 1200 1420 1970 2380 2720 3290 3750 4170 5020 97° 100° 87°
ⓦ 55⁄16 25⁄8 1110 1300 1550 2130 2570 2930 3530 4050 4500 5430 103° 106° 92°
* Flange Connection
** Foreign matter with maximum diameter as listed can pass through nozzle without clogging
DIMENSIONS & WEIGHTS
Based on largest/heaviest version of each type. ANGLE TYPE
Nozzle Nozzle
Nozzle Inlet Conn. Net Nozzle Inlet Net
Type NPT or A B Conn.
Type NPT A B C D L
Weight Weight
BSPT
or
BSPT
C
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz. Q\ˆ QQ\ŒÁ" T\ˆ" O\ŒÁ" sq. EQ\´„" WO\´„" 1Q\„ oz. 23
G Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz. GA Q\‰ U\ˆ" WT\´„" QQ\ŒÁ" sq. 1U\´„" 1T\´„" 2 oz.
E\ˆ 1QE\ŒÁ" QE\ŒÁ" hex. 2Q\„ oz. E\ˆ 1" U\ˆ" QE\ŒÁ" sq. 1U\ŒÁ" 1O\´„" 3Q\‰ oz.
GENERAL PURPOSE
Q\„ 2Q\‰" 1" hex. 6 oz. Q\„ 1QU\´„" 1Q\ŒÁ" 1" sq. 2Q\´„" 1O\ŒÁ" 6Q\‰ oz.
Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz. Q\ˆ QQ\ŒÁ" WQ\´„" O\ŒÁ" sq. EQ\´„" QT\ŒÁ" 1Q\„ oz.
GG Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz. Q\‰ U\ˆ" QE\ŒÁ" QQ\ŒÁ" sq. 1Q\‰" 1T\´„" 2 oz.
E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz. GGA
E\ˆ 1" WO\´„" QE\ŒÁ" sq. 1U\ŒÁ" 1T\ŒÁ" 3Q\‰ oz.
Q\„ 2U\´„" 1" hex. 6 oz. Q\„ 1QU\´„" 1Q\ˆ" 1" sq. 2Q\´„" 1T\ˆ" 6Q\‰ oz.
FULL CONE
Cast E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz.
4 9U\ˆ" 5U\ŒÁ" dia. 18 lbs.
5 12Q\‰" 6E\‰" oct. 38 lbs. Q\„ 2QQ\Á‰" 1" hex. 4Q\„ oz.
6 14E\ˆ" 8" oct. 53 lbs.
8 18Q\„" 9Q\„" oct. 92 lbs. E\‰ 2Q\ˆ" 1Q\‰" dia. 6 oz.
1 2QQ\ŒÁ" 1Q\„" dia. 14 oz.
4 8Q\ˆ" 9" dia. 27 lbs. 1Q\‰ 3E\ˆ" 1U\ˆ" dia. 1Q\„ lbs.
5 10O\ŒÁ" 10" dia. 36 lbs. HD 1Q\„ 4Q\ŒÁ" 2Q\‰" dia. 2Q\„ lbs.
HF 6 12T\ˆ" 11" dia. 49 lbs. 2 5Q\ŒÁ" 2E\‰" dia. 4Q\„ lbs.
8 16T\ˆ" 13Q\„" dia. 106 lbs. 2Q\„ 6Q\‰" 3Q\‰" dia. 7 lbs.
10 20E\‰" 16" dia. 173 lbs. 3 7T\ŒÁ" 4" dia. 12E\‰ lbs.
*Bar stock nozzles only; SS in material code = 316 stainless steel for cast nozzles.
SPRAY NOZZLES
SQUARE SPRAY
C
24
GENERAL PURPOSE
DESIGN FEATURES
Square Spray FullJet nozzles distribution is the result of a of these components without
feature a solid cone-shaped unique vane design…with large removal of the nozzle body from
spray pattern with a square flow passages and superior its header or manifold.
impact area and spray angles of spray control characteristics. H-SQ series nozzles feature
40° to 105°. They are well-suited for installa- removable vanes.
Square Spray FullJets produce tions requiring complete NOTE: The sides of the square
a uniform spray of medium to coverage of rectangular areas flat spray pattern are offset
large droplets across their entire or spray zones. approximately 20° to 25° from
spray area over a wide range of G-SQ and GG-SQ series Square the groove positions of the
spraying pressures and flow Spray FullJet nozzles feature nozzles, depending upon
rates. This uniform spray removable caps and vanes…to spraying pressure and spray
allow the removal and inspection distance. Write for details.
FULL CONE
COMMON APPLICATIONS
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Scrubbers
ⓦ Liquor washers
ⓦ Dust control
ⓦ Fire protection
ACCESSORIES
Split-Eyelet Adjustable
TW Strainer Other Accessories
Connector Ball Fittings RINSE TANK
ⓦ Pressure Gauges
ⓦ Pressure Regulators
ⓦ Pressure Relief Valves
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Check Valves
SEE SECTION G FOR
COMPLETE INFORMATION.
PERFORMANCE DATA
Nozzle NOZZLE TYPE Orifice Max. CAPACITY SPRAY
Inlet (F) (M) Capacity Diam. Free (gallons per minute) ANGLE
Conn. Conn.
NPT or
Conn. Size Nom. Passage 5 7 10 20 30 40 60 80 100 150 7 20 80
BSPT G H GG HH Inches Diam. psi psi psi psi psi psi psi psi psi psi psi psi psi
Inches
1/8
ⓦ ⓦ ⓦ
ⓦ
3.6SQ
4.8SQ
Q\ŒÁ
T\Á‰
.050 .26 .31 .36 .50
.050 .34 .40 .48 .66
.60
.80
.69
.91
.83
1.1
.95
1.3
1.1
1.4
1.3
1.7
40°
48°
52°
63°
47°
57°
C
ⓦ ⓦ ⓦ 6SQ E\´„ .050 .43 .51 .60 .83 1.0 1.1 1.4 1.6 1.8 2.1 60° 66° 60° 25
ⓦ ⓦ ⓦ 10SQ U\Á‰ Q\ŒÁ .72 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 62° 67° 61°
1/4 ⓦ ⓦ ⓦ 12SQ Q\ˆ Q\ŒÁ .86 1.0 1.2 1.7 2.0 2.3 2.8 3.2 3.5 4.3 70° 75° 68°
GENERAL PURPOSE
ⓦ 14.5SQ .154 Q\ŒÁ 1.1 1.2 1.45 2.0 2.4 2.8 3.3 3.8 4.2 5.1 78° 82° 75°
3/8 ⓦ ⓦ ⓦ 18SQ T\´„ E\´„ 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.3 6.4 71° 75° 68°
1/2 ⓦ ⓦ ⓦ 29SQ U\´„ Q\ˆ 2.1 2.5 2.9 4.0 4.8 5.5 6.7 7.6 8.5 10.0 71° 75° 68°
ⓦ 36SQ Q\‰ Q\ˆ 2.6 3.1 3.6 5.0 6.0 6.9 8.3 9.5 10.5 13.0 78° 82° 75°
3/4 ⓦ 50SQ QU\Á‰ QQ\Á‰ 3.7 4.3 5.0 7.0 8.4 9.6 11.5 13.2 14.6 17.6 71° 75° 68°
1 ⓦ 106SQ WT\Á‰ U\´„ 7.6 8.9 10.6 14.5 17.5 20 24 28 31 37 78° 80° 73°
1-1/4 ⓦ 177SQ Q\„ Q\‰ 12.8 15.0 17.7 25 30 34 41 47 52 63 78° 80° 73°
1-1/2 ⓦ 230SQ O\ŒÁ QQ\´„ 16.6 19.5 23 32 38 44 53 61 67 80 73° 77° 70°
ⓦ 290SQ EO\Á‰ U\ŒÁ 21 25 29 40 48 55 67 76 85 100 66° 70° 64°
2 ⓦ 360SQ QQ\ŒÁ U\ŒÁ 26 31 36 50 60 69 83 95 105 130 70° 74° 67°
ⓦ 480SQ TE\Á‰ U\ŒÁ 34 40 48 66 80 91 110 125 138 166 79° 82° 74°
ⓦ 490SQ WT\´„ O\ŒÁ 35 41 49 67 81 92 113 128 142 170 62° 67° 61°
2-1/2 ⓦ 590SQ U\ˆ O\ŒÁ 43 50 59 81 99 113 136 155 173 208 75° 78° 71°
ⓦ 950SQ 1Q\ˆ QQ\ŒÁ 69 80 95 132 160 183 220 253 280 339 81° 84° 76°
5 ⓦ 2980SQ 1U\ˆ 1Q\ˆ 213 250 298 408 490 561 678 775 860 1040 89° 91° 83°
6 ⓦ 5690SQ 3U\´„ 1E\‰ 412 480 569 780 940 1080 1310 1490 1670 2040 102° 105° 95°
Standard Materials Material Code
Q Q Q Q no material code = Brass
Q Q Q Q I = Mild Steel
Q Q Q SS = 303 Stainless Steel (Bar Stock)
Q SS = 316 Stainless Steel (Cast Type)
Q Q Q 316SS = 316 Stainless Steel (Bar Stock)
FULL CONE
Q PVC = Polyvinyl Chloride
G GG ORDERING INFORMATION
Nozzle Nozzle
Inlet
Net Inlet
Net STANDARD
Conn. A B Weight
Conn. A B Weight
SPRAY NOZZLE
NPT or NPT or
BSPT BSPT
1/4 G - SS 12SQ
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz. Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz.
Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz. Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz. Inlet Nozzle Material Capacity
Connection Type Code Size
Pipe Size
H HH
Nozzle
Inlet Nozzle
Conn. Net Inlet
A B Net
NPT or Weight Conn. A B
BSPT NPT or Weight
BSPT
1 2E\‰" 1Q\„" dia. 13 oz.
1Q\‰ 3U\ŒÁ" 2Q\ŒÁ" dia. 1Q\‰ lbs. Q\ˆ U\ˆ" Q\„" dia. Q\„ oz.
1Q\„ 4Q\ŒÁ" 2T\ŒÁ" dia. 1E\‰ lbs. Q\‰ WO\´„" QU\´„" dia. Q\„ oz.
2 5U\ŒÁ" 3" dia. 3E\‰ lbs. E\ˆ 1E\ŒÁ" WQ\´„" dia. 1 oz.
2Q\„ 6U\ˆ" 3U\ŒÁ" dia. 4E\‰ lbs.
5 12Q\‰" 6E\‰" oct. 38 lbs. Q\„ 1E\ˆ" QE\ŒÁ" dia. 1Q\„ oz.
6 14E\ˆ" 8" oct. 53 lbs. E\‰ 1QO\´„" 1Q\ŒÁ" dia. 3Q\„ oz.
SPRAY NOZZLES
OVAL SPRAY
G-VL GG-VL
removable cap and vane removable cap and vane
3⁄8" NPT or BSPT (F) 3⁄8" NPT or BSPT (M)
C
26
GENERAL PURPOSE
PERFORMANCE DATA
Nozzle NOZZLE TYPE Max. CAPACITY (gallons per minute) SPRAY ANGLES
Inlet Free
Conn. (F) (M) Capacity Passage 15 psi 40 psi 100 psi 150 psi
15 30 40 60 80 100 150
NPT or Conn. Conn. Size
FULL CONE
ACCESSORIES
Adjustable
Split-Eyelet Connector Pressure Gauge Check Valve Other Accessories
Ball Fittings
ⓦ Pressure Regulator
ⓦ Pressure Relief Valves
ⓦ Solenoid Valves
ⓦ Control Valves
ⓦ TW Strainers
SEE SECTION G FOR
COMPLETE INFORMATION.
SPRAY NOZZLES
VANELESS
GANV GGANV
vaneless/removable cap vaneless/removable cap
1⁄4"- 1⁄2" NPT or BSPT (F) 1⁄4"- 1⁄2" NPT or BSPT (M)
C
27
GENERAL PURPOSE
DESIGN FEATURES
Vaneless FullJet nozzles feature Their coarse spray is projected requiring a full cone spray pat-
a solid cone-shaped spray from the nozzle at an axis 90° tern with coarser spray charac-
pattern with a round impact from the axis of the nozzle inlet. teristics and/or greater free
area; as well as completely passage dimensions through the
Vaneless FullJet nozzles are
unrestricted internal flow nozzle than other FullJet nozzles.
best suited for applications
passages…with no vane.
PERFORMANCE DATA
Nozzle NOZZLE TYPE Orifice Max. CAPACITY
SPRAY ANGLE
Inlet Capac- Diam. Free (gallons per minute)
Conn. (F) (M) ity Nom. Passage
NPT or Conn. Conn. Size Inches Diam. 5 7 10 15 20 30 40 60 80 100 7 20 80
BSPT GANV GGANV Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
ACCESSORIES ⓦ ⓦ 5 U\Á‰ T\Á‰ .35 .42 .50 .61 .71 .87 1.0 1.2 1.4 1.6 68° 75° 82°
ⓦ ⓦ 7 Q\ˆ E\´„ .49 .59 .70 .86 .99 1.2 1.4 1.7 2.0 2.2 68° 75° 82°
Split-Eyelet 1/4 ⓦ ⓦ 8 T\´„ U\Á‰ .57 .67 .80 .98 1.1 1.4 1.6 1.9 2.3 2.5 75° 80° 85°
ⓦ ⓦ 10 T\´„ Q\ˆ .71 .84 1.0 1.2 1.4 1.7 2.0 2.4 2.8 3.2 75° 80° 85°
FULL CONE
Connector
ⓦ ⓦ 11 T\´„ O\Á‰ .78 .92 1.1 1.3 1.6 1.9 2.2 2.7 3.1 3.5 75° 80° 85°
ⓦ ⓦ 11 QQ\Á‰ Q\ˆ .78 .92 1.1 1.3 1.6 1.9 2.2 2.7 3.1 3.5 75° 85° 83°
ⓦ ⓦ 13 QQ\Á‰ O\Á‰ .92 1.1 1.3 1.6 1.8 2.3 2.6 3.2 3.7 4.1 75° 85° 83°
ⓦ ⓦ 16 QQ\Á‰ T\´„ 1.1 1.3 1.6 2.0 2.3 2.8 3.2 3.9 4.5 5.1 75° 85° 83°
ⓦ ⓦ 20 U\´„ QQ\Á‰ 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.7 6.3 75° 85° 83°
3/8
ⓦ ⓦ 23 U\´„ E\ŒÁ 1.6 1.9 2.3 2.8 3.3 4.0 4.6 5.6 6.5 7.3 75° 85° 83°
ⓦ ⓦ 26 QT\Á‰ QE\Á‰ 1.8 2.2 2.6 3.2 3.7 4.5 5.2 6.4 7.4 8.2 75° 85° 83°
ⓦ ⓦ 29 QT\Á‰ U\´„ 2.1 2.4 2.9 3.6 4.1 5.0 5.8 7.1 8.2 9.2 75° 85° 83°
ⓦ ⓦ 33 QO\Á‰ QT\Á‰ 2.3 2.8 3.3 4.0 4.7 5.7 6.6 8.1 9.3 10.4 75° 85° 83°
Pressure Regulator Pressure ⓦ ⓦ 32 T\ŒÁ QE\Á‰ 2.2 2.7 3.2 3.9 4.5 5.5 6.4 7.8 9.1 10.1 85° 90° 95°
Control Valve Relief Valve ⓦ ⓦ 40 T\ŒÁ QT\Á‰ 2.8 3.3 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 85° 90° 95°
ⓦ ⓦ 48 T\ŒÁ O\´„ 3.4 4.0 4.8 5.9 6.8 8.3 9.6 11.8 13.6 15.2 85° 90° 95°
1/2
ⓦ ⓦ 56 WT\Á‰ QO\Á‰ 4.0 4.7 5.6 6.9 7.9 9.7 11.2 13.7 15.8 17.7 85° 90° 95°
ⓦ ⓦ 64 WT\Á‰ WQ\Á‰ 4.5 5.4 6.4 7.8 9.1 11.1 12.8 15.7 18.1 20 85° 90° 95°
ⓦ ⓦ 72 WT\Á‰ WE\Á‰ 5.1 6.0 7.2 8.8 10.2 12.5 14.4 17.6 20 23 85° 90° 95°
Material Material Code
Q Q no material code = Brass
Q Q SS = 303 Stainless Steel
Other Accessories DIMENSIONS & WEIGHTS Based on largest/heaviest version of each type. ORDERING INFORMATION
ⓦ Swivel Connectors STANDARD
SPRAY NOZZLE
ⓦ Check Valves
ⓦ Pressure Gauges 1/4 GANV - SS 10
ⓦ Solenoid Valves Inlet Nozzle Material Capacity
SEE SECTION G FOR Connection Type Code Size
Pipe Size
COMPLETE INFORMATION. Nozzle
Nozzle Inlet Conn. Net
C
A B D L Weight
Type NPT or sq.
BSPT oz.
R RR RF
2"-8" NPT or BSPT (F) 2"-8" NPT or BSPT (M) 4"-12" Flange
C
28
GENERAL PURPOSE
DESIGN FEATURES
DistriboJet series FullJet nozzles range of 1-60 psi (0.07-4 bar)
feature a solid cone-shaped with a full cone spray pattern
spray pattern with a round developing at 1 psi (0.07 bar).
impact area and spray angles DistriboJet nozzles produce very
from 50° to 95°. large droplets.
DistriboJet nozzles utilize an The 50° and 65° series have
internal vane…cast as part of specially designed grooved
the nozzle…with extra-large flow orifices for accurate flow rate
passages and a large open and spray angle control with
orifice to assure non-clogging their narrow sprays. These
operation. grooves are not necessary for
Their design allows an operating the 80° and 95° series, which
Nozzle Nozzle
Inlet Conn. Net Inlet Conn. Net Flange Net
R NPT or A B Weight RR NPT or A B Weight RF Size A B Weight
BSPT BSPT
2 4U\ŒÁ" 2QT\ŒÁ" dia. 3 lbs. 2 3Q\‰" 2E\ˆ" dia. 2 lbs. 4 6O\ŒÁ" 8U\ˆ" dia. 23 lbs.
2Q\„ 5QT\´„" 3QT\´„" dia. 5Q\„ lbs. 2Q\„ 4" 2U\ˆ" dia. 5Q\‰ lbs. 5 8E\ŒÁ" 9U\ˆ" dia. 39 lbs.
3 6Q\„" 4Q\ˆ" dia. 7Q\„ lbs. 3 4U\ˆ" 3Q\„" dia. 5E\‰ lbs. 6 9QE\ŒÁ" 10U\ˆ" dia. 45 lbs.
4 8Q\ˆ" 5" dia. 13Q\„ lbs. 4 6Q\„" 4Q\„" dia. 10 lbs. 8 13" 13E\ˆ" dia. 85 lbs.
5 10Q\´„" 6E\ˆ" dia. 33 lbs. 5 8Q\ˆ" 5O\ŒÁ" dia. 25 lbs. 12 19Q\„" 19" dia. 110 lbs.
6 11QE\ŒÁ" 7T\ˆ" dia. 38Q\„ lbs. 6 9E\‰" 6T\ˆ" dia. 29 lbs.
8 15T\ŒÁ" 9Q\„" dia. 75 lbs. 8 13" 8T\ˆ" dia. 56 lbs.
ⓦ Chemical processing
ACCESSORIES
Junction Box
CHEMICAL PROCESSING
TOWER
ⓦ ⓦ
Inches
45 1
psi psi psi psi psi psi psi psi psi psi
C
ⓦ ⓦ 45 1Q\ŒÁ 27 45 57 67 78 94 108 130 148 179 29
2 ⓦ ⓦ 45 1O\Á‰
ⓦ ⓦ 60
GENERAL PURPOSE
1QU\Á‰
36 60 76 89 104 126 144 174 199 239
ⓦ ⓦ 60 1WU\Á‰
ⓦ ⓦ 70 1QT\Á‰
ⓦ ⓦ 70 1QQ\´„ 42 70 88 103 122 147 168 202 232 278
2-1/2 ⓦ ⓦ 70 1U\ŒÁ
ⓦ ⓦ 90 1O\ŒÁ
54 90 113 133 157 189 216 260 297 358
ⓦ ⓦ 90 1RO\Á‰
ⓦ ⓦ 110 1ET\Á‰
ⓦ ⓦ 110 1RE\Á‰ 66 110 139 163 192 231 263 318 363 439
3 ⓦ ⓦ 110 1TE\Á‰
ⓦ ⓦ 140 1EQ\´„
84 140 177 207 243 293 335 404 463 557
ⓦ ⓦ 140 2Q\‰
ⓦ ⓦ ⓦ 160 1U\ˆ
ⓦ ⓦ ⓦ 160 2Q\Á‰ 97 160 203 237 279 337 384 466 532 642
ⓦ ⓦ ⓦ 160 2Q\ˆ
ⓦ ⓦ ⓦ 190 2E\Á‰
4
ⓦ ⓦ ⓦ 190 2QE\Á‰ 115 190 240 280 331 399 456 549 628 756
ⓦ ⓦ ⓦ 190 2E\ˆ
ⓦ ⓦ ⓦ 250 2T\ˆ
151 250 317 369 436 524 600 723 827 997
ⓦ ⓦ ⓦ 250 3Q\Á‰
ⓦ ⓦ ⓦ 250 2WE\Á‰
FULL CONE
ⓦ ⓦ ⓦ 250 2EE\Á‰ 151 250 317 369 436 524 600 723 827 997
ⓦ ⓦ ⓦ 250 2WQ\´„
ⓦ ⓦ ⓦ 280 2QT\´„
5
ⓦ ⓦ ⓦ 280 2WQ\´„ 168 280 354 413 487 587 671 809 927 1120
ⓦ ⓦ ⓦ 280 2TT\Á‰
ⓦ ⓦ ⓦ 380 3U\´„
229 380 480 560 660 795 909 1100 1260 1520
ⓦ ⓦ ⓦ 380 3WQ\´„
ⓦ ⓦ ⓦ 360 2TE\Á‰
ⓦ ⓦ ⓦ 360 3Q\Á‰ 217 360 456 532 624 755 863 1040 1190 1430
ⓦ ⓦ ⓦ 360 3E\ŒÁ
ⓦ ⓦ ⓦ 400 2EQ\´„
6
ⓦ ⓦ ⓦ 400 3E\ŒÁ 241 400 505 588 696 837 957 1160 1320 1590
ⓦ ⓦ ⓦ 400 3QE\´„
ⓦ ⓦ ⓦ 560 3TO\Á‰
337 560 710 827 975 1170 1340 1620 1850 2230
ⓦ ⓦ ⓦ 560 4Q\„
ⓦ ⓦ ⓦ 650 3TQ\Á‰
ⓦ ⓦ ⓦ 650 4Q\ŒÁ 393 650 823 962 1130 1370 1570 1880 2150 2600
ⓦ ⓦ ⓦ 650 4QQ\´„
ⓦ ⓦ ⓦ 750 4E\Á‰
8 ⓦ ⓦ ⓦ 750 4QE\´„ 453 750 949 1120 1310 1570 1800 2170 2480 2990
ⓦ ⓦ ⓦ 750 4WT\´„
ⓦ ⓦ ⓦ 850 4E\‰
512 850 1070 1260 1480 1780 2030 2450 2810 3390
ⓦ ⓦ ⓦ 850 5T\ŒÁ
ⓦ ⓦ ⓦ 1000 6Q\‰ 604 1000 1270 1480 1750 2110 2410 2890 3310 4000
ⓦ 1400 6QO\Á‰ 846 1400 1770 2070 2440 2940 3350 4040 4610 5560
ⓦ 1600 6TT\Á‰ 967 1600 2030 2360 2790 3360 3830 4610 5270 6350
ⓦ 1700 7E\ŒÁ 1030 1700 2150 2150 2960 3570 4070 4900 5600 6750
12
ⓦ 1800 7EE\Á‰ 1090 1800 2280 2660 3130 3780 4310 5190 5930 7150
ⓦ 2000 8U\´„ 1210 2000 2530 2960 3480 4200 4790 5770 6590 7940
ⓦ 2200 9E\Á‰ 1330 2200 2790 3250 3830 4620 5260 6340 7250 8730
Standard Materials Material Code
Q Q Q Q Q Q Q Q Q Q Q Q no material code = Brass
Q Q Q Q Q Q Q Q Q Q Q Q I = Cast Iron
Q Q Q Q Q Q Q Q Q Q Q Q SS = 316 Stainless Steel
SPRAY NOZZLES
NARROW ANGLE 15° SERIES
C
30
GENERAL PURPOSE
DESIGN FEATURES
Narrow Angle Injector FullJet G and GG type FullJet nozzles exacting dimensions to assure
nozzles feature a solid cone- have removable caps and vanes. optimal performance. Their
shaped spray pattern with a uniform spray distribution results
H and HH type Narrow Angle
round impact area. The narrow from a unique and original vane
FullJet nozzles have removable
spray angles of the 30° series, design…with large flow
vanes.
and to a greater extent the 15° passages and superior spray
series, produce uniform and Sizes !\°" through 1!\›" are from control characteristics.
coarse sprays with significantly bar stock; 1!\¤" and larger are cast.
higher impact per unit area than FullJet nozzles are precision-
wider angle FullJet nozzles at engineered and machined to
the same flow rate.
PERFORMANCE DATA ACCESSORIES
Nozzle NOZZLE TYPE Orifice CAPACITY SPRAY Split-Eyelet
Inlet (F) (M) Capacity Diam. (gallons per minute) ANGLE Connector
Conn.
NPT or Conn. Conn. Size Nom. 10 20 30 40 60 80 100 150 200 300 10 40 100
BSPT G H GG Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ ⓦ 1507 Q\ŒÁ .35 .50 .61 .70 .86 .99 1.1 1.4 1.6 1.9 13° 15° 15°
FULL CONE
1/8
ⓦ ⓦ 1514 E\´„ .70 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 13° 15° 15°
1/4 ⓦ ⓦ 1530 Q\ˆ 1.5 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 13° 15° 15°
3/8 ⓦ ⓦ 1550 QQ\Á‰ 2.5 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 13° 15° 15°
1/2 ⓦ ⓦ 1590 U\´„ 4.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 20 25 13° 15° 15°
3/4 ⓦ 15150 QO\Á‰ 7.5 10.6 13.0 15.0 18.4 21 24 29 34 41 13° 15° 15°
1 ⓦ 15280 WT\Á‰ 14.0 19.8 23 28 34 40 44 54 63 77 13° 15° 15° Adjustable
1-1/4 ⓦ 15430 EQ\Á‰ 22 30 37 43 53 61 68 83 96 118 14° 15° 15° Ball Fittings
1-1/2 ⓦ 15630 QO\´„ 32 45 55 63 77 89 100 122 141 173 14° 15° 15°
2 ⓦ 151150 TQ\Á‰ 58 81 100 115 141 162 182 223 257 315 14° 15° 15°
2-1/2 ⓦ 151750 EQ\´„ 87 124 152 175 214 247 277 339 391 479 14° 15° 15°
3 ⓦ 152500 1T\´„ 125 176 216 250 306 353 395 484 559 685 14° 15° 15°
4 ⓦ 154500 1O\ŒÁ 225 318 390 450 550 636 712 871 1006 1232 14° 15° 15°
5 ⓦ 157000 1TO\Á‰ 350 495 606 700 858 990 1108 1356 1565 1917 14° 15° 15°
Standard Material Material Code
Q Q Q no material code = Brass
Q Q Q TW
SS = 303 Stainless Steel (Bar Stock) Strainer
Q Q Q SS = 316 Stainless Steel (Cast Type)/303 SS
Caps 1Q\„" and Larger
Nozzle
Inlet
G
C
Conn. A B Net
Weight
31
NPT or
BSPT
GENERAL PURPOSE
Q\ˆ 1QE\´„" QQ\ŒÁ" hex. 2 oz.
Q\‰ 1QQ\ŒÁ" QE\ŒÁ" hex. 3 oz.
E\ˆ 2Q\ˆ" 1" hex. 6 oz.
Q\„ 2T\ˆ" 1Q\‰" hex. 11 oz.
E\‰ 3T\ŒÁ" 1Q\„" hex. 1Q\‰ lbs.
PERFORMANCE DATA
Nozzle Nozzle Type Orifice CAPACITY SPRAY
Inlet Capacity Diam. (gallons per minute) ANGLE
Conn. (F) (M)
NPT or Conn. Conn. Size Nom. 15 20 30 40 60 80 100 150 200 300 15 40 100
BSPT G GG HH Inches psi psi psi psi psi psi psi psi psi psi psi psi psi
GG ⓦ ⓦ 3001.4 Q\´„ .09 .10 .12 .14 .17 .20 .22 .27 .31 .38 17° 30° 31°
Nozzle 1/8 ⓦ ⓦ 3002.5 Q\´„ .15 .18 .22 .25 .31 .35 .40 .48 .56 .68 17° 30° 32°
Inlet ⓦ ⓦ 3004 E\Á‰ .25 .28 .35 .40 .49 .57 .63 .78 .90 1.1 26° 30° 32°
Conn. Net
A B ⓦ ⓦ 3007 Q\ŒÁ .43 .50 .61 .70 .86 .99 1.1 1.4 1.6 1.9 23°
NPT or Weight 30° 30°
BSPT 1/4 ⓦ ⓦ 3009 T\Á‰ .55 .64 .78 .90 1.1 1.3 1.4 1.7 2.0 2.5 23° 30° 30°
Q\ˆ 1QU\´„" QQ\ŒÁ" hex. 2 oz. 3/8 ⓦ ⓦ 3014 E\´„ .86 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 25° 30° 30°
Q\‰ 1WT\´„" QE\ŒÁ" hex. 3 oz.
E\ˆ 2E\ŒÁ" 1" hex. 6 oz. 1/2 ⓦ ⓦ 3030 Q\ˆ 1.8 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 26° 30° 31°
Q\„ 2E\‰" 1Q\‰" hex. 11 oz. 3/4 ⓦ ⓦ 3050 QQ\Á‰ 3.1 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 26° 30° 31°
E\‰ 3U\ŒÁ" 1Q\„" hex. 1Q\‰ lbs. ⓦ 3070 QE\Á‰ 4.3 5.0 6.1 7.0 8.6 9.9 11.1 13.6 15.7 19.2 27° 30° 30°
1
ⓦ 30100 Q\‰ 6.1 7.1 8.7 10.0 12.3 14.2 15.8 19.4 22 27 27° 30° 30°
ⓦ 30150 QO\Á‰ 9.2 10.6 13.0 15.0 18.4 21 24 29 34 41 27° 30° 30°
1-1/4
ⓦ 30200 QQ\´„ 12.3 14.2 17.3 20.0 25 28 32 39 45 55 27° 30° 30°
ⓦ 30250 E\ˆ 15 18 22 25 31 35 40 48 56 68 27° 30° 30°
1-1/2
FULL CONE
ⓦ 30300 QE\´„ 18 21 26 30 37 42 47 58 67 82 27° 30° 30°
H Bar Stock ⓦ 30350 U\ŒÁ 21 25 30 35 43 50 55 68 78 96 28° 30° 30°
Nozzle 2 ⓦ 30400 QT\´„ 25 28 35 40 49 57 63 78 90 110 28° 30° 30°
Inlet ⓦ 30500 QU\´„ 31 35 43 50 61 71 79 97 112 137 28° 30° 30°
Conn. Net
A B Weight ⓦ 30600 EU\Á‰ 37 42 52 60 74 85 95 116 134 164 28° 30° 30°
NPT or
BSPT ⓦ 30700 T\ˆ 43 50 61 70 86 99 111 136 157 192 28° 30° 30°
E\‰ 2WU\´„" 1Q\‰" dia. 15 oz. ⓦ 301000 E\‰ 61 71 87 100 123 141 158 194 223 274 28° 30° 30°
2-1/2
1 3T\ˆ" 1Q\„" dia. 1Q\‰ lbs. ⓦ 301100 WT\´„ 67 78 95 110 135 155 174 213 246 301 28° 30° 30°
1Q\‰ 4T\ˆ" 1U\ˆ" dia. 2Q\„ lbs. ⓦ 301200 QE\ŒÁ 73 85 104 120 147 170 190 232 268 328 28° 30° 30°
Standard Materials Material Code
Q Q Q no material code = Brass
Q Q Q SS = 303 Stainless Steel
Q Q 316SS = 316 Stainless Steel ACCESSORIES
HH
Split-Eyelet TW
Nozzle Connector Strainer
Inlet
Conn. Net
A B
NPT or Weight
BSPT
1 3T\ˆ" 1T\ŒÁ" dia. 1Q\‰ lbs.
1Q\‰ 5" 1QQ\ŒÁ" dia. 2Q\‰ lbs.
1Q\„ 6E\´„" 1U\ˆ" dia. 3Q\‰ lbs.
2 7U\ˆ" 2E\ˆ" dia. 7E\ˆ lbs.
2Q\„ 10E\ˆ" 2U\ˆ" dia. 12 lbs. ORDERING INFORMATION
STANDARD
SPRAY NOZZLE
C
32
GENERAL PURPOSE
DESIGN FEATURES
Wide Angle FullJets feature a applications requiring complete G-W and GG-W Wide Angle HH-W Wide Angle FullJet
solid cone-shaped spray pattern coverage of an area or zone. FullJet nozzles feature three- nozzles (!\›" to 1") feature two-
with a round impact area and piece construction (body/cap/ piece construction with non-
This uniform spray distribution
FULL CONE
spray angles of 120° to 125°. vane) with removable vane. This removable vanes.
results from a unique vane
style of nozzle is especially well-
They produce a uniform spray design and exacting internal H-W FullJet nozzles feature two-
suited for header and manifold
of medium to coarse droplets proportions…engineered to piece construction with removable
installations…allowing the
across their entire spray area…to assure accurate and consistent vanes (cast type).
removal and inspection of the
give excellent results in spraying performance.
cap and vane without removal of
the nozzle body from the header.
COMMON APPLICATIONS
ⓦ Washing & rinsing processes ⓦ Scrubbing, washing and ⓦ Breaking up and deaerating
cooling of flue gases to foam
ⓦ Quenching & cooling of
remove fly ash and other
coke, primary metals and ⓦ Creating and dispersing
products of combustion
other materials droplets in chemical reaction
ⓦ Deluging combustible materials processing
ⓦ Suppression of fugitive dust
and storage tanks for fire
in the processing of bulk
suppression and prevention
ores, coal, limestone, sand
and gravel
C
33
GENERAL PURPOSE
Wide Angle Square Spray Angle type FullJet nozzles have
DESIGN FEATURES FullJets feature a solid cone-
DESIGN FEATURES removable caps and vanes for
shaped spray pattern with a Angle Type Wide Spray FullJets convenient inspection and
square impact area and spray feature a spraying axis 90° from cleaning operations.
angles of 93°-115°. the axis of the nozzle inlet, a FullJet nozzles are precision-
solid cone-shaped spray pattern
Their uniform spray distribution engineered and manufactured to
with a round impact area, and a
of medium to large droplets is assure accurate and reliable
spray angle of 120°.
the result of the unique FullJet flow rate and spray pattern
nozzle vane design, exacting The angle type design is useful characteristics. Their unique
internal proportions, and wherever FullJet nozzles must internal vane with large flow
precision machining. be installed on an extension passages assures a uniform
over the center of a spray zone spray of well-formed droplets
The Wide Angle Square Spray
or mounted in a side-tapped across their entire spray area
type of FullJet is ideal for instal-
header. over a wide range of pressures
lations requiring uniform coverage
and flow rates.
FULL CONE
of rectangular areas or zones.
Sizes 1!\›" and larger are cast
type nozzles with removable
vanes.
Nozzle
DIMENSIONS & WEIGHTS Nozzle Inlet Net
Conn. A B C D L
Based on largest/heaviest version of each type. Type NPT or Weight
BSPT
Q\ˆ QQ\ŒÁ" T\ˆ" O\ŒÁ" sq. EQ\´„" WO\´„" 1Q\„ oz.
Q\‰ U\ˆ" WT\´„" QQ\ŒÁ" sq. 1U\´„" 1T\´„" 2 oz.
GA-W E\ˆ 1" U\ˆ" QE\ŒÁ" sq. 1U\ŒÁ" 1O\´„" 3Q\‰ oz.
Q\„ 1QU\´„" 1Q\ŒÁ" 1" sq. 2Q\´„" 1O\ŒÁ" 6Q\‰ oz.
G GG Q\ˆ QQ\ŒÁ" WQ\´„" O\ŒÁ" sq. EQ\´„" QT\ŒÁ" 1Q\„ oz.
Nozzle Nozzle Q\‰ U\ˆ" QE\ŒÁ" QQ\ŒÁ" sq. 1Q\‰" 1T\´„" 2 oz.
Inlet Inlet GGA-W
Net Net E\ˆ 1" WO\´„" QE\ŒÁ" sq. 1U\ŒÁ" 1T\ŒÁ" 3Q\‰ oz.
Conn. A B Conn. A B
NPT or Weight NPT or Weight Q\„ 1QU\´„" 1Q\ˆ" 1" sq. 2Q\´„" 1T\ˆ" 6Q\‰ oz.
BSPT BSPT
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz. Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz.
Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz. Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz.
E\ˆ 1QE\ŒÁ" QE\ŒÁ" hex. 2Q\„ oz. E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz.
Q\„ 2Q\‰" 1" hex. 6 oz. Q\„ 2U\´„" 1" hex. 6 oz.
ORDERING INFORMATION
STANDARD
SPRAY NOZZLE
PERFORMANCE DATA
NOZZLE TYPE SPRAY
Nozzle Maxi- CAPACITY
ANGLE Orifice mum (gallons per minute) ANGLE
C Inlet
Conn.
NPT or
(F)
STANDARD
Conn.
(M)
Conn.
SQUARE
(F) (M)
TYPE
(F) (M)
Conn. Conn. Conn. Conn.
Capacity Diam. Free
Size Nom. Passage
Inches Diam. 5 7 10 15 20 30 40 60 80 5 10 80
34 BSPT
G H GG HH H HH GA GGA
Inches psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ ⓦ 2.8W Q\ŒÁ .040 .28 .33 .38 .45 .51 .61 .70 120° 102°
GENERAL PURPOSE
ⓦ ⓦ ⓦ ⓦ 4.3W T\Á‰ .040 .43 .51 .58 .70 .79 .95 1.1 120° 102°
1/8 ⓦ ⓦ 5.6W .040 .48 .56 .67 120° 102°
E\´„ .76 .91 1.0 1.2 1.4
ⓦ ⓦ ⓦ ⓦ 8W E\´„ .050 .68 .80 .96 1.1 1.3 1.5 1.8 2.0 120° 103°
ⓦ ⓦ 10W U\Á‰ .050 .74 .86 1.0 1.2 1.4 1.6 1.8 2.2 2.5 112° 120° 103°
1/4 ⓦ ⓦ 12W Q\ˆ .050 .89 1.0 1.2 1.4 1.6 1.9 2.2 2.6 3.0 114° 120° 103°
ⓦ ⓦ ⓦ ⓦ ⓦ 14W O\Á‰ Q\ŒÁ 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 114° 120° 103°
ⓦ 14WSQ O\Á‰ Q\ŒÁ 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 99° 101° 93°
ⓦ ⓦ ⓦ 17W T\´„ Q\ŒÁ 1.3 1.5 1.7 2.0 2.3 2.8 3.1 3.7 4.2 114° 120° 103°
ⓦ 17WSQ T\´„ Q\ŒÁ 1.3 1.5 1.7 2.0 2.3 2.8 3.1 3.7 4.2 99° 101° 93°
ⓦ ⓦ ⓦ ⓦ ⓦ 20W QQ\Á‰ E\´„ 1.5 1.7 2.0 2.4 2.7 3.2 3.7 4.4 5.0 114° 120° 104°
3/8 ⓦ 20WSQ QQ\Á‰ E\´„ 1.5 1.7 2.0 2.4 2.7 3.2 3.7 4.4 5.0 104° 110° 94°
ⓦ ⓦ ⓦ 24W E\ŒÁ E\´„ 1.8 2.1 2.4 2.9 3.3 3.9 4.4 5.3 6.0 114° 120° 104°
ⓦ 24WSQ E\ŒÁ E\´„ 1.8 2.1 2.4 2.9 3.3 3.9 4.4 5.3 6.0 104° 110° 94°
ⓦ ⓦ ⓦ 27W QE\Á‰ U\Á‰ 2.0 2.3 2.7 3.2 3.7 4.4 5.0 5.9 6.7 114° 120° 106°
ⓦ 27WSQ QE\Á‰ U\Á‰ 2.0 2.3 2.7 3.2 3.7 4.4 5.0 5.9 6.7 104° 110° 98°
ⓦ ⓦ ⓦ 30W U\´„ U\Á‰ 2.2 2.6 3.0 3.6 4.1 4.9 5.5 6.6 7.5 114° 120° 108°
ⓦ 30WSQ U\´„ U\Á‰ 2.2 2.6 3.0 3.6 4.1 4.9 5.5 6.6 7.5 104° 110° 102°
ⓦ ⓦ ⓦ ⓦ ⓦ 35W QT\Á‰ Q\ˆ 2.6 3.0 3.5 4.2 4.8 5.7 6.4 7.7 8.7 114° 120° 108°
ⓦ 35WSQ QT\Á‰ Q\ˆ 2.6 3.0 3.5 4.2 4.8 5.7 6.4 7.7 8.7 104° 110° 102°
1/2 ⓦ ⓦ ⓦ 40W Q\‰ Q\ˆ 3.0 3.4 4.0 4.8 5.4 6.5 7.4 8.8 10.0 114° 120° 108°
ⓦ 40WSQ Q\‰ Q\ˆ 3.0 3.4 4.0 4.8 5.4 6.5 7.4 8.8 10.0 104° 110° 102°
ⓦ ⓦ ⓦ 45W Q\‰ O\Á‰ 3.3 3.9 4.5 5.4 6.1 7.3 8.3 9.9 11.2 114° 120° 110°
ⓦ 45WSQ Q\‰ O\Á‰ 3.3 3.9 4.5 5.4 6.1 7.3 8.3 9.9 11.2 104° 110° 102°
ⓦ ⓦ ⓦ ⓦ ⓦ 50W QU\Á‰ T\´„ 3.7 4.3 5.0 6.0 6.8 8.1 9.2 11.0 12.5 114° 120° 112°
ⓦ 50WSQ QU\Á‰ T\´„ 3.7 4.3 5.0 6.0 6.8 8.1 9.2 11.0 12.5 104° 110° 102°
FULL CONE
3/4 ⓦ ⓦ 6W WT\Á‰ QQ\Á‰ 5.2 6.0 7.0 8.4 9.5 11.4 12.9 15.4 17.5 115° 120° 112°
ⓦ ⓦ 71WSQ WT\Á‰ QQ\Á‰ 5.2 6.0 7.0 8.4 9.5 11.4 12.9 15.4 17.5 105° 110° 102°
ⓦ ⓦ 11W EE\Á‰ U\´„ 9.5 11.0 12.9 15.4 17.5 21 24 28 32 117° 120° 117°
1
ⓦ ⓦ 130WSQ EE\Á‰ U\´„ 9.5 11.0 12.9 15.4 17.5 21 24 28 32 107° 110° 107°
1-1/4 ⓦ 16W EO\Á‰ Q\‰ 13.8 16.0 18.7 22 25 30 34 41 47 118° 121° 119°
ⓦ 190WSQ EO\Á‰ U\´„ 13.8 16.0 18.7 22 25 30 34 41 47 108° 111° 109°
1-1/2 ⓦ 24W WE\´„ QE\´„ 21 24 28 34 38 46 52 62 70 119° 124° 119°
ⓦ 290WSQ WE\´„ T\ŒÁ 21 24 28 34 38 46 52 62 70 109° 114° 109°
3 ⓦ 95W 1E\ˆ QQ\ŒÁ 82 95 111 133 151 180 205 245 277 120° 125° 119°
ⓦ 1070WSQ 1E\ˆ QQ\ŒÁ 82 95 111 133 151 180 205 245 277 110° 115° 109°
4 ⓦ 188W 2 QE\ŒÁ 162 188 220 263 299 357 405 484 549 120° 125° 119°
Standard Materials Material Code
Q Q Q Q Q Q Q Q no material code = Brass
Q Q Q Q Q Q Q Q I = Mild Steel (Bar Stock) or Cast Iron (Cast)
Q Q Q Q Q Q Q Q SS = 303 Stainless Steel (Bar Stock) or 316 Stainless Steel (Cast)
Q Q Q Q Q Q Q 316SS = 316 Stainless Steel (Bar Stock)
Q Q PVC = Polyvinyl Chloride
ORDERING INFORMATION
STANDARD
SPRAY NOZZLE
1/4 GG - SS 14W
Inlet Nozzle Material Capacity
Connection Type Code Size
Pipe Size
SPRAY NOZZLES
KYNAR® SERIES
GENERAL PURPOSE
BSPT. They range in flow rates
from .25 gpm to 1.9 gpm at 40
psi (.97 l/min to 7.4 l/min at 3
bar), and handle temperatures to
DESIGN FEATURES 300°F (150°C) at 100 psi (7 bar).
The new natural KYNAR FullJet The nozzle body has standard
spray nozzle provides chemical hex sizes and a flange for easy
and corrosion resistance in an installation and removal using a
ultra-pure nozzle. The natural, standard socket wrench.
FULL CONE
1/8 4 .073 .40 .55 .66 .76 .91 1.0 1.2 52° 65° 59°
ⓦ Quenching and cooling
6 .089 .60 .83 .99 1.1 1.4 1.6 1.7 67° 75° 82°
ⓦ Dust suppression
6 .089 .60 .83 .99 1.1 1.4 1.6 1.7 67° 75° 82°
ⓦ Gas scrubbing 1/4
8 .096 .80 1.1 1.3 1.5 1.8 2.1 2.3 58° 70° 64°
ⓦ Deaerating
6 .089 .60 .83 .99 1.1 1.4 1.6 1.7 67° 75° 82°
3/8 8 .096 .80 1.1 1.3 1.5 1.8 2.1 2.3 58° 70° 64°
10 .109 1.0 1.4 1.7 1.9 2.4 2.7 3.0 58° 70° 64°
Nozzle Type
DIMENSIONS & WEIGHTS Nozzle Inlet
Connection
A
Hex
B
Diameter
L
Length
Net
Wt.
ORDERING INFORMATION
NPT (M) BSPT (M)
Q\ˆHH-KY BQ\ˆHH-KY Q\ˆ E\ˆ" T\ˆ" U\ˆ" 0.1 oz.
STANDARD
SPRAY NOZZLE
B Q\‰HH-KY BQ\‰HH-KY Q\‰ Q\„" E\‰" 1" 0.1 oz.
Dia.
E\ˆHH-KY BE\ˆHH-KY E\ˆ Q\„" E\‰" 1Q\´„" 0.2 oz. 1/8 HH - KY 1.3
Inlet Nozzle Material Capacity
Conn. Type Code Size
Pipe
L Size
A
Hex
Vane
Nozzle
Inlet
Connection
SPRAY NOZZLES
COMPACT, ONE PIECE, LARGE FLOW RATE
FULL CONE SPRAY NOZZLES
HHSJ HHSJ HHSJ
threaded/hex threaded/flats threaded/round
1⁄4)-2) NPT or BSPT (M) 1⁄4)-4) NPT or BSPT (M) 1⁄4)-4) NPT or BSPT (M)
C
36
GENERAL PURPOSE
HFSJ
2), 3) & 4) sizes
C
37
GENERAL PURPOSE
These larger capacity nozzles They are designed with precision
DESIGN FEATURES are size efficient…for maximum impact blade angles that
Type HFSJ (full cone) flange-type throughput for a given pipe size distribute the spray droplets for
nozzles provide good coverage and the large free passage excellent coverage. The flange-
for a variety of applications from resists clogging. type nozzles can be custom-
flue gas desulphurization and sized for your installation and
Flow capacities at 10 psi (.7 bar)
dust suppression to gas cooling. are available in several
range from 140 to 525 gpm (530
They are available with reaction- abrasion-resistant materials.
to 2020 l/min). These full cone
bonded silicon carbide tips on nozzles are available with 2), 3)
FRP flanges and up to 4) size
FULL CONE
and 4) flange mountings and
flange connections. spray angles from 60° to 170°.
PERFORMANCE DATA
Standard Material
CAPACITY Reaction-bonded Silicon Carbide with
Free (gallons per minute)
Connection Capacity Orifice F.R.P. Flange.
Passage
Size Size Diam. 10 20 40 100 400 Material Code
60° 90° 120° 150° 170° Diam.
psi psi psi psi psi SILCRB = Reaction-bonded
Silicon Carbide
2) ⓦ ⓦ ⓦ ⓦ ⓦ 1400 13⁄8) ⁄ )
7 16 140 198 280 443 885
Fläns* ⓦ ⓦ ⓦ ⓦ ⓦ 1780 11⁄2) ⁄ )
7 16 178 252 356 563 1125
3) ⓦ ⓦ ⓦ 2560 13⁄4) 9⁄16) 256 362 512 810 1620
9⁄16)
Fläns* ⓦ ⓦ ⓦ 3360 2) 336 475 672 1060 2120
4) Fläns* ⓦ ⓦ ⓦ 5250 21⁄2) 5⁄8) 525 743 1050 1660 3320
C
38
GENERAL PURPOSE
ⓦ Fire suppression & prevention simple one-piece design, the TEFLON, silicon carbide, material, size and application.
inlet orifice is the smallest ceramic, and PVC are available
opening that liquid passes upon request.
through. The outlet helix orifice Type HHSJX SpiralJet nozzles ACCESSORIES
is proportionately larger than the are available with either 90° or
inlet opening. This virtually Adjustable Ball Fittings
120° spray angle with full-cone
eliminates plugging and allows spray patterns. The HHSJX
for maximum liquid throughput.
PERFORMANCE DATA
Free CAPACITY
Pipe Size Spray Angle at 10 psi Orifice Nozzle Length
Capacity Passage (gallons per minute)
NPT or Diam. Split-Eyelet Connector
Size Diam. 10 20 40 100 400
BSPT (M) 90° 120° inches 90° & 120°
inches psi psi psi psi psi
P P 30 E\ŒÁ E\ŒÁ 3.0 4.2 6.0 9.5 19.0
P P 40 U\´„ U\´„ 4.0 5.7 8.0 12.6 25
3/8 2E\‰"
P P 53 Q\‰ Q\‰ 5.3 7.5 10.6 16.8 34
P P 82 T\ŒÁ T\ŒÁ 8.2 11.6 16.4 26 52
INDEX
VeeJet®
Standard Type H-VV, H-VVL,
H-U, U................. C40-C43
VeeJet®
KYNAR® Series HVV-KY, HU-KY.......... C44
FlatJet®
Narrow Angle–
High Impact P......................... C45, C46
FloodJet ®
Wide Angle
For Liquid, Air & Steam K................................. C47
WashJet®
High Pressure-Washing MEG/WEG, MEG-SSTC
QCMEG, MEF
23990, 24055......C48, C49
High Pressure-Coating
RotoClean® Attachments
and Kits for 106A, 220A.......... C50, C51
RotoClean® Attachment
and Kits for 225.................................C52
SPRAY NOZZLES
STANDARD TYPE
C
40
GENERAL PURPOSE
The H-VV and H-VVL series H-U and U series VeeJet spray
DESIGN FEATURES VeeJet nozzles feature flow rates nozzles feature flow rates of 1
Standard VeeJet spray nozzles below 1 gpm at 40 psi (3.9 liters gpm (3.9 liters per minute) and
feature a high impact solid per minute at 3 bar), and male greater at 40 psi (3 bar), and male
stream or flat spray pattern with pipe thread connections. They are pipe thread connections.
spray angles of 0° to 110°. also available with female pipe !\°" and !\›" H-U series nozzles are
connections by using DT in place
They produce a uniform distrib- available with female pipe connec-
of VV in the order number. H-VVL
ution of small to medium-sized tions by using DU in place of U in
series nozzles come equipped
droplets. the order number. See page C43
with built-in strainers (not available for materials.
Specially tapered spray pattern with female pipe connections).
edges provide even spray cover-
age when several nozzles with
overlapping patterns are required.
WASHING COAL
COMMON APPLICATIONS
ⓦ Cooling and quenching ⓦ Scrubbers
FLAT SPRAY
ACCESSORIES
Split-Eyelet Adjustable Pressure
Pressure Gauge 124 Strainer Control Valves Other Accessories
Connector Ball Fittings Relief Valves
ⓦ Check Valves
ⓦ Swivel Connectors
Jet Stabilizer Inlet Conn. NPT Conn. for Nozzle Height Net Weight
JET STABILIZERS DESIGN FEATURES Order No. or BSPT (M) NPT or BSPT (F) Inches oz.
Jet Stabilizers increase spray 11370–1⁄8 x 1⁄8 18
⁄ 18
⁄ 34⁄ 14
⁄
projection distance and spray 11370–1⁄4 x 1⁄4 14
⁄ 14
⁄ 15 16
⁄ 12
⁄
impact on flat spray nozzles. 11370–3⁄8 x 3⁄8 3⁄8 3⁄8 1 ⁄16
1 1
11370–1⁄2 x 1⁄2 1⁄2 1⁄2 1 ⁄4
1 1 ⁄4
3
When nozzles are mounted in 11370–3⁄4 x 3⁄4 3⁄4 3⁄4 11⁄2 31⁄2
tees, manifolds, or elbows, 11370–1 x 1 1 1 113⁄16 61⁄4
internal flow turbulence is created 11370–11⁄4 x 11⁄4 11⁄4 11⁄4 21⁄4 113⁄4
when the liquid turns the corner
and enters the nozzle. This ORDERING INFORMATION
turbulence can significantly distort
spray pattern uniformity. Jet JET
STABILIZER
Stabilizers minimize turbulence
and increase spray distance and 11370 - SS - 1/8X1/8
impact by concentrating the spray
Jet Material Connection
into a thinner, steadier pattern. Stabilizer Code Size
Type
PERFORMANCE DATA
SPRAY NOZZLES
Spray VEEJET NOZZLES Equiv. CAPACITY
Capa- NOZZLE TYPE/INLET CONNECTION (gallons per minute) SPRAY ANGLE
Angle Orifice
city
at 40 Diam.
Size H-VV H-VVL H-U U 5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
psi Inches
1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2 psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
11001 ⓦ ⓦ ⓦ ⓦ .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 94° 110° 121° 124°
110015 ⓦ ⓦ ⓦ ⓦ .031 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 97° 110° 121° 124°
11002 ⓦ ⓦ ⓦ ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 98° 110° 120° 123°
11003 ⓦ ⓦ ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 99° 110° 120° 123°
11004 ⓦ ⓦ ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 100° 110° 119° 122°
11005 ⓦ ⓦ ⓦ ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 100° 110° 118° 122°
110°
ⓦ ⓦ ⓦ ⓦ
11006
11008
11010
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ ⓦ
.062 .21 .30 .42 .52 .60 .73
.072 .28 .40 .56 .69 .80 .98
T\Á‰ .35 .50 .71 .86 1.0 1.2
.85 .95 1.3 1.6 2.1
1.1 1.3 1.8 2.2 2.8
1.4 1.6 2.2 2.7 3.5
101°
102°
103°
110°
110°
110°
117°
117°
117°
122°
121°
119°
C
11015 ⓦ ⓦ E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 104° 110° 117° 118° 41
11020 ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 105° 110° 117° 118°
950050 ⓦ ⓦ .018 .035 .043 .050 .06 .07 .08 .11 .14 .18 81° 95° 105° 113°
GENERAL PURPOSE
9501 ⓦ ⓦ ⓦ ⓦ .026 .03 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 81° 95° 105° 113°
95015 ⓦ ⓦ .031 .05 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 82° 95° 105° 113°
9502 ⓦ ⓦ ⓦ ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 82° 95° 105° 113°
9503 ⓦ ⓦ ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 83° 95° 104° 111°
9504 ⓦ ⓦ ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 84° 95° 103° 108°
9505 ⓦ ⓦ ⓦ ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 84° 95° 102° 107°
9506 ⓦ ⓦ ⓦ ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 86° 95° 101° 106°
9508 ⓦ ⓦ ⓦ ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 87° 95° 100° 105°
95° 9510 ⓦ ⓦ ⓦ T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 89° 95° 100° 105°
9515 ⓦ ⓦ ⓦ E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 90° 95° 100° 105°
9520 ⓦ ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 90° 95° 100° 105°
9530 ⓦ ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 91° 95° 101° 105°
9540 ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 92° 95° 100° 105°
9550 ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 93° 95° 99° 103°
9560 ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 93° 95° 99° 103°
9570 ⓦ ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 93° 95° 99° 103°
95100 ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 93° 95° 99° 102°
95150 ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 93° 95° 99° 102°
800050 ⓦ ⓦ ⓦ ⓦ .018 .035 .043 .050 .06 .07 .08 .11 .14 .18 61° 80° 95° 101°
800067 ⓦ ⓦ ⓦ ⓦ .021 .03 .05 .06 .067 .08 .09 .11 .15 .18 .24 67° 80° 94° 99°
8001 ⓦ ⓦ ⓦ ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 68° 80° 89° 92°
80015 ⓦ ⓦ ⓦ ⓦ .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 68° 80° 89° 92°
8002 ⓦ ⓦ ⓦ ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 69° 80° 88° 91°
8003 ⓦ ⓦ ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 70° 80° 87° 90°
8004 ⓦ ⓦ ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 71° 80° 86° 89°
ⓦ ⓦ ⓦ ⓦ
FLAT SPRAY
8005 .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 71° 80° 86° 89°
8006 ⓦ ⓦ ⓦ ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 72° 80° 85° 88°
8008 ⓦ ⓦ ⓦ ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 72° 80° 84° 87°
8010 ⓦ ⓦ ⓦ ⓦ T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 73° 80° 84° 87°
80°
8015 ⓦ ⓦ ⓦ E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 74° 80° 83° 86°
8020 ⓦ ⓦ ⓦ ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 74° 80° 83° 86°
8030 ⓦ ⓦ ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 74° 80° 83° 86°
8040 ⓦ ⓦ ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 74° 80° 83° 86°
8050 ⓦ ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 74° 80° 83° 85°
8060 ⓦ ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 75° 80° 83° 85°
8070 ⓦ ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 75° 80° 83° 86°
80100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 75° 80° 83° 86°
80150 ⓦ ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 73° 80° 84° 86°
80200 ⓦ ⓦ QQ\´„ 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 71 74° 80° 82° 85°
80400 ⓦ Q\„ 14.1 20.0 28 35 40 49 57 63 90 110 142 78° 80° 81° 83°
730077 ⓦ ⓦ ⓦ ⓦ .022 .039 .055 .067 .077 .09 .11 .12 .17 .21 .27 53° 73° 86° 92°
730154 ⓦ ⓦ ⓦ ⓦ .032 .05 .08 .11 .13 .154 .19 .22 .24 .34 .42 .54 55° 73° 84° 88°
730231 ⓦ ⓦ .040 .08 .12 .16 .20 .231 .28 .33 .37 .52 .63 .82 56° 73° 83° 87°
73°
730308 ⓦ ⓦ ⓦ ⓦ .045 .11 .15 .22 .27 .308 .38 .44 .49 .69 .84 1.1 58° 73° 82° 86°
730462 ⓦ ⓦ .056 .16 .23 .33 .40 .462 .57 .65 .73 1.0 1.3 1.6 60° 73° 80° 84°
730770 ⓦ ⓦ .072 .27 .38 .54 .67 .770 .94 1.1 1.2 1.7 2.1 2.7 64° 73° 77° 82°
650017 ⓦ ⓦ .011 .012 .015 .017 .021 .024 .027 .038 .047 .06 44° 65° 77° 86°
650033 ⓦ ⓦ .015 .023 .029 .033 .040 .047 .052 .07 .09 .12 47° 65° 76° 83°
650067 ⓦ ⓦ ⓦ ⓦ .021 .03 .05 .06 .067 .08 .09 .11 .15 .18 .24 50° 65° 75° 81°
6501 ⓦ ⓦ ⓦ ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 51° 65° 74° 80°
65015 ⓦ ⓦ ⓦ ⓦ .031 .07 .11 .13 .15 .18 .21 .24 .34 .41 .53 51° 65° 74° 80°
6502 ⓦ ⓦ ⓦ ⓦ .036 .07 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 52° 65° 73° 79°
65025 ⓦ ⓦ .040 .09 .13 .18 .22 .25 .31 .35 .40 .56 .68 .88 52° 65° 73° 79°
6503 ⓦ ⓦ ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 53° 65° 72° 78°
6504 ⓦ ⓦ ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 53° 65° 72° 76°
6505 ⓦ ⓦ ⓦ ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 53° 65° 72° 76°
65° 6506 ⓦ ⓦ ⓦ ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 54° 65° 72° 75°
6508 ⓦ ⓦ ⓦ ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 55° 65° 71° 74°
6510 ⓦ ⓦ ⓦ T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 56° 65° 71° 74°
6515 ⓦ ⓦ ⓦ ⓦ E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 56° 65° 70° 73°
6520 ⓦ ⓦ ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 57° 65° 70° 73°
6530 ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 58° 65° 69° 72°
6540 ⓦ ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 59° 65° 68° 72°
6550 ⓦ ⓦ ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 60° 65° 68° 71°
6560 ⓦ ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 60° 65° 68° 71°
6570 ⓦ ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 60° 65° 68° 71°
65100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 58° 65° 69° 70°
65150 ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 59° 65° 68° 70°
65200 ⓦ ⓦ QQ\´„ 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 71 60° 65° 67° 69°
PERFORMANCE DATA
Spray VEEJET NOZZLES Equiv. CAPACITY
Capa- (gallons per minute) SPRAY ANGLE
Angle NOZZLE TYPE/INLET CONNECTION Orifice
city
at 40 Diam.
Size H-VV H-VVL H-U U 5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
psi Inches
1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2 psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
5001 ⓦ ⓦ ⓦ ⓦ .026 .05 .07 .09 .10 .12 .14 .16 .22 .27 .35 37° 50° 59° 65°
5002 ⓦ ⓦ ⓦ ⓦ .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 39° 50° 57° 63°
5003 ⓦ ⓦ ⓦ ⓦ .043 .11 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 40° 50° 56° 62°
5004 ⓦ ⓦ ⓦ ⓦ .052 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 42° 50° 56° 61°
5005 ⓦ ⓦ ⓦ ⓦ .057 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 44° 50° 56° 61°
5006 ⓦ ⓦ ⓦ ⓦ .062 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 45° 50° 56° 60°
C 5008
5010
5015
ⓦ ⓦ ⓦ ⓦ
ⓦ ⓦ
ⓦ
ⓦ
ⓦ ⓦ
.072 .28 .40 .56 .69 .80 .98
T\Á‰
E\´„
.35 .50 .71 .86 1.0 1.2
.53 .75 1.1 1.3 1.5 1.8
1.1 1.3 1.8 2.2 2.8 45° 50° 55° 60°
1.4 1.6 2.2 2.7 3.5 45° 50° 55° 59°
2.1 2.4 3.4 4.1 5.3 45° 50° 55° 59°
42 5020 ⓦ ⓦ ⓦ ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 45° 50° 55° 59°
50°
5030 ⓦ ⓦ ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 45° 50° 55° 59°
5040 ⓦ ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 46° 50° 54° 59°
GENERAL PURPOSE
5050 ⓦ ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 46° 50° 54° 59°
5060 ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 46° 50° 54° 59°
5070 ⓦ ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 46° 50° 54° 59°
50100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 44° 50° 52° 54°
50120 ⓦ QU\Á‰ 4.2 6.0 8.5 10.4 12.0 14.7 17.0 19.0 27 33 42 44° 50° 53° 55°
50150 ⓦ ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 45° 50° 52° 55°
50200 ⓦ QQ\´„ 7.1 10.0 14.1 17.3 20 25 28 32 44 55 71 46° 50° 52° 55°
50400 ⓦ Q\„ 14.1 20 28 35 40 49 57 63 90 110 142 46° 50° 52° 55°
50500 ⓦ ⓦ EE\Á‰ 17.7 25 35 43 50 61 71 79 112 137 177 49° 50° 51° 54°
50580 ⓦ ET\Á‰ 21 29 41 50 58 71 82 92 130 159 205 49° 50° 51° 53°
50750 ⓦ T\ˆ 27 38 53 65 75 92 106 119 168 206 266 49° 50° 51° 53°
501000 ⓦ WE\´„ 35 50 71 87 100 123 142 158 223 273 353 49° 50° 51° 53°
501500 ⓦ TU\Á‰ 53 75 106 130 150 184 212 237 335 411 530 49° 50° 51° 52°
502000 ⓦ 1Q\´„ 71 100 142 173 200 245 283 316 447 547 707 49° 50° 51° 52°
4001 ⓦ ⓦ ⓦ ⓦ .026 .07 .09 .10 .12 .14 .16 .22 .27 .35 26° 40° 52° 59°
40015 ⓦ ⓦ ⓦ ⓦ .031 .11 .13 .15 .18 .21 .24 .34 .41 .53 27° 40° 52° 59°
4002 ⓦ ⓦ ⓦ ⓦ .036 .10 .14 .17 .20 .25 .28 .32 .45 .55 .71 29° 40° 51° 58°
4003 ⓦ ⓦ ⓦ ⓦ .043 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1 30° 40° 50° 57°
4004 ⓦ ⓦ ⓦ ⓦ .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 30° 40° 50° 56°
4005 ⓦ ⓦ ⓦ ⓦ .057 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 31° 40° 49° 55°
4006 ⓦ ⓦ ⓦ ⓦ .062 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 31° 40° 49° 55°
40°
4008 ⓦ ⓦ ⓦ ⓦ .072 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 31° 40° 47° 53°
4010 ⓦ ⓦ ⓦ T\Á‰ .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 32° 40° 45° 48°
4015 ⓦ ⓦ ⓦ E\´„ .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 32° 40° 45° 48°
4020 ⓦ ⓦ ⓦ ⓦ U\Á‰ .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 32° 40° 45° 48°
FLAT SPRAY
4030 ⓦ ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 33° 40° 45° 48°
4040 ⓦ ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 34° 40° 45° 48°
4050 ⓦ ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 35° 40° 45° 48°
4060 ⓦ ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 35° 40° 45° 48°
4070 ⓦ ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 35° 40° 45° 48°
40100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 34° 40° 43° 46°
40150 ⓦ ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 35° 40° 43° 44°
40200 ⓦ QQ\´„ 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 71 36° 40° 42° 44°
2501 ⓦ ⓦ ⓦ ⓦ .026 .07 .09 .10 .12 .14 .16 .22 .27 .35 14° 25° 34° 42°
2502 ⓦ ⓦ ⓦ ⓦ .036 .14 .17 .20 .25 .28 .32 .45 .55 .71 15° 25° 33° 40°
2503 ⓦ ⓦ ⓦ ⓦ .043 .21 .26 .30 .37 .42 .47 .67 .82 1.1 15° 25° 33° 40°
2504 ⓦ ⓦ ⓦ ⓦ .052 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 16° 25° 32° 39°
2505 ⓦ ⓦ ⓦ ⓦ .057 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 16° 25° 32° 39°
2506 ⓦ ⓦ ⓦ ⓦ .062 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 17° 25° 31° 38°
2508 ⓦ ⓦ ⓦ ⓦ .072 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 17° 25° 31° 38°
2510 ⓦ ⓦ T\Á‰ .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 18° 25° 31° 37°
2515 ⓦ ⓦ ⓦ E\´„ .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 18° 25° 31° 37°
2520 ⓦ ⓦ ⓦ U\Á‰ 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 19° 25° 31° 37°
25°
2530 ⓦ ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 20° 25° 30° 36°
2540 ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 21° 25° 29° 35°
2550 ⓦ ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 21° 25° 29° 35°
2560 ⓦ ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 22° 25° 29° 35°
2570 ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 22° 25° 29° 35°
25100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 23° 25° 28° 32°
25150 ⓦ ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53 24° 25° 28° 30°
25200 ⓦ QQ\´„ 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 71 24° 25° 26° 29°
25500 ⓦ ⓦ EE\Á‰ 17.7 25 35 43 50 61 71 79 112 137 177 24° 25° 26° 29°
25750 ⓦ T\ˆ 27 38 53 65 75 92 106 119 168 206 266 24° 25° 26° 28°
251000 ⓦ RU\Á‰ 35 50 71 87 100 123 142 158 223 273 353 24° 25° 26° 28°
1501 ⓦ ⓦ ⓦ ⓦ .026 .09 .10 .12 .14 .16 .22 .27 .35 15° 24° 28°
1502 ⓦ ⓦ .036 .14 .17 .20 .25 .28 .32 .45 .55 .71 6° 15° 22° 27°
1503 ⓦ ⓦ ⓦ ⓦ .043 .21 .26 .30 .37 .42 .47 .67 .82 1.1 6° 15° 22° 27°
1504 ⓦ ⓦ ⓦ ⓦ .052 .28 .35 .40 .49 .57 .63 .89 1.1 1.4 7° 15° 21° 26°
1505 ⓦ ⓦ ⓦ ⓦ .057 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8 7° 15° 21° 26°
1506 ⓦ ⓦ ⓦ ⓦ .062 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1 8° 15° 21° 26°
15° 1508 ⓦ ⓦ ⓦ ⓦ .072 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8 9° 15° 20° 25°
1510 ⓦ ⓦ T\Á‰ .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5 10° 15° 19° 24°
1515 ⓦ ⓦ ⓦ E\´„ .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3 10° 15° 19° 24°
1520 ⓦ ⓦ ⓦ U\Á‰ 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1 10° 15° 19° 23°
1530 ⓦ ⓦ ⓦ O\Á‰ 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6 10° 15° 19° 21°
1540 ⓦ ⓦ ⓦ T\´„ 2.0 2.8 3.5 4.0 4.9 5.7 6.3 8.9 11.0 14.2 10° 15° 18° 21°
1550 ⓦ ⓦ ⓦ QQ\Á‰ 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 11° 15° 18° 21°
SPRAY NOZZLES
PERFORMANCE DATA
Spray VEEJET NOZZLES Equiv. CAPACITY
Capa- NOZZLE TYPE/INLET CONNECTION (gallons per minute) SPRAY ANGLE
Angle Orifice
city
at 40 Diam.
Size H-VV H-VVL H-U U 5 10 20 30 40 60 80 100 200 300 500 20 40 80 200
psi Inches
1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2 psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
1560 ⓦ ⓦ E\ŒÁ 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21 11° 15° 18° 21°
1570 ⓦ ⓦ QE\Á‰ 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25 11° 15° 18° 21°
15100 ⓦ ⓦ Q\‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35 13° 15° 17° 18°
15° 15120
15150
ⓦ
ⓦ
ⓦ
QU\Á‰
QO\Á‰
4.2 6.0 8.5 10.4 12.0 14.7 17.0
5.3 7.5 10.6 13.0 15.0 18.4 21
19.0
24
27
34
33
41
42
53
13°
14°
15°
15°
17°
17°
18°
18° C
15200
15250 ⓦ
QQ\´„
E\ˆ
7.1 10.0 14.1 17.3 20.0 25 28
8.8 12.5 17.7 22 25 31 35
32
40
44
56
55
68
71
88
14°
14°
15°
15°
17°
16°
18°
17°
43
15500 ⓦ EE\Á‰ 17.7 25 35 43 50 61 71 79 112 137 177 14° 15° 16° 17°
151000 ⓦ RU\Á‰ 35 50 71 87 100 123 142 158 223 273 353 14° 15° 16° 17°
GENERAL PURPOSE
0003 ⓦ ⓦ .041 .10 .15 .21 .26 .30 .37 .42 .47 .67 .82 1.1
0004 ⓦ ⓦ .047 .14 .20 .28 .35 .40 .49 .57 .63 .89 1.1 1.4
0005 ⓦ ⓦ .053 .18 .25 .35 .43 .50 .61 .71 .79 1.1 1.4 1.8
0006 ⓦ ⓦ .058 .21 .30 .42 .52 .60 .73 .85 .95 1.3 1.6 2.1
0008 ⓦ ⓦ .067 .28 .40 .56 .69 .80 .98 1.1 1.3 1.8 2.2 2.8
0010 ⓦ ⓦ .073 .35 .50 .71 .86 1.0 1.2 1.4 1.6 2.2 2.7 3.5
0015 ⓦ ⓦ .092 .53 .75 1.1 1.3 1.5 1.8 2.1 2.4 3.4 4.1 5.3
0020 ⓦ ⓦ ⓦ .106 .71 1.0 1.4 1.7 2.0 2.5 2.8 3.2 4.5 5.5 7.1
0030 ⓦ ⓦ O\Á‰ 1.1 1.5 2.1 2.6 3.0 3.7 4.2 4.7 6.7 8.2 10.6
0040 ⓦ ⓦ T\´„ 1.4 2.0 2.8 3.5 4.0 4.9 5.7 6.3 9.0 11.0 14.2 0°
0050 ⓦ QQ\Á‰ 1.8 2.5 3.5 4.3 5.0 6.1 7.1 7.9 11.2 13.7 17.7 SOLID STREAM
0060 ⓦ E\ŒÁ 2.1 3.0 4.2 5.2 6.0 7.3 8.5 9.5 13.4 16.4 21
0070 ⓦ ⓦ QE\Á‰ 2.5 3.5 4.9 6.1 7.0 8.6 9.9 11.1 15.7 19.2 25
0° 0080 ⓦ ⓦ QE\Á‰ 2.8 4.0 5.6 6.9 8.0 9.8 11.3 12.6 17.9 22 28
00100 ⓦ QT\Á‰ 3.5 5.0 7.1 8.6 10.0 12.2 14.1 15.8 22 27 35
00120 ⓦ Q\‰ 4.2 6.0 8.5 10.4 12.0 14.7 17.0 19.0 27 33 42
00150 ⓦ QO\Á‰ 5.3 7.5 10.6 13.0 15.0 18.4 21 24 34 41 53
00200 ⓦ WQ\Á‰ 7.1 10.0 14.1 17.3 20.0 25 28 32 44 55 71
00250 ⓦ E\ˆ 8.8 12.5 17.7 22 25 31 35 40 56 68 88
00350 ⓦ U\ŒÁ 12.4 17.5 25 30 35 43 50 55 78 96 124
00700 ⓦ EO\Á‰ 25 35 50 61 70 86 98 111 157 192 247
001000 ⓦ E\‰ 35 50 71 87 100 123 142 158 223 273 353
001100 ⓦ WT\´„ 39 55 78 95 110 135 156 174 246 301 389
001400 ⓦ U\ˆ 50 70 99 121 140 171 198 221 313 383 495
001800 ⓦ 1 64 90 127 156 180 220 254 285 402 493 636
FLAT SPRAY
002000 ⓦ 1E\Á‰ 71 100 142 173 200 245 283 316 447 547 706
003500 ⓦ 1E\ˆ 125 175 247 303 350 428 494 553 783 958 1240
H-U
Nozzle Nozzle Net H-VV
Hex.
No. Length Weight U Nozzle Nozzle Net
Hex.
H1/8U Q\„" U\ˆ" Q\„ oz. Nozzle Nozzle Net No. Length Weight
Diameter
H1/4U O\ŒÁ" 1" E\‰ oz. No. Length Weight H1/8VV U\ˆ" Q\„ oz.
H3/8U QQ\ŒÁ" 1Q\‰" 1Q\„ oz. Q\„"
1U 1T\ŒÁ" 2Q\„" 9 oz. H1/8VVL 1QE\´„" E\‰ oz.
H1/2U U\ˆ" 1Q\„" 2Q\‰ oz. 1-1/4U 1QQ\ŒÁ" 3E\‰" 1Q\‰ lbs. H1/4VV WO\´„" E\‰ oz.
H3/4U 1Q\ŒÁ" 2" 5 oz. O\ŒÁ"
2U 2E\ˆ" 5" 4Q\‰ lbs. H1/4VVL 1Q\„" 1 oz.
HVV-KY HU-KY
connection sizes of !\°" and !\›"
NPT or BSPT. They range in flow
rates from .25 gpm to 2.0 gpm at
ⓦ Washing and rinsing 6505 .057 .25 .35 .43 .50 .61 .71 .79 53° 65° 72°
ⓦ Quenching and cooling 8002 .036 .10 .14 .17 .20 .25 .28 .32 69° 80° 88°
1/8 8003 .043 .15 .21 .26 .30 .37 .42 .47 70° 80° 87°
ⓦ Dust suppression 8004 .052 .20 .28 .35 .40 .49 .57 .63 71° 80° 86°
ⓦ Gas scrubbing 8006 .062 .30 .42 .52 .60 .73 .85 .95 72° 80° 85°
8008 .072 .40 .56 .69 .80 .98 1.1 1.3 72° 80° 84°
ⓦ Deaerating
8010 .078 .50 .71 .86 1.0 1.2 1.4 1.6 73° 80° 84°
1/4 8015 .094 .75 1.1 1.3 1.5 1.8 2.1 2.4 74° 80° 83°
8020 .109 1.0 1.4 1.7 2.0 2.5 2.8 3.2 74° 80° 83°
Nozzle Type
DIMENSIONS & WEIGHTS Inlet
Connection
A B C L Net ORDERING INFORMATION
NPT (M) BSPT (M) Hex Flats Dia. Length Wt.
A STANDARD
HQ\ˆVV-KY HBQ\ˆVV-KY Q\ˆ E\ˆ" Q\„" T\ˆ" U\ˆ" 0.1 oz. SPRAY NOZZLE
Hex
HQ\‰U-KY HBQ\‰U-KY Q\‰ Q\„" T\ˆ" E\‰" 1" 0.2 oz.
H 1/4 U - KY 8010
L
B Flats Nozzle Inlet Nozzle Material Orifice
C Type Conn. Type Code No.
Dia. Prefix Pipe
Size
Inlet
Connection
SPRAY NOZZLE
NARROW ANGLE
HIGH IMPACT
P
18
⁄ "-3⁄4" NPT or BSPT (M)
C
45
GENERAL PURPOSE
DESIGN FEATURES
FlatJet spray nozzles feature a P series FlatJet spray nozzles
very high impact flat spray offer a one-piece design with a
pattern with narrow spray angles. male pipe thread connection.
They produce a uniform spray Large unobstructed flow pas-
distribution of medium-sized sage minimizes clogging. The
droplets. The FlatJet spray precision-machined deflector
pattern has sharply defined plane produces a uniform, high
edges. impact spray pattern.
COMMON APPLICATIONS
ⓦ Washing crushed stone
and gravel
ⓦ High impact washing
FLAT SPRAY
ⓦ Degreasing
WASHING GRAVEL
ⓦ Fruit and vegetable washing
ACCESSORIES
Split-Eyelet Adjustable Pressure
Pressure Gauge 124 Strainer Control Valves Other Accessories
Connector Ball Fittings Relief Valves
ⓦ Check Valves
ⓦ Swivel Connectors
C ⓦ 5010 T\Á‰
psi psi psi
1.2
psi
1.4
psi
1.6 1.9
psi psi
34°
psi
50°
psi
60° 1U\´„
Angle
60°
sq.
T\ˆ 1 oz.
46 ⓦ ⓦ 5025 U\Á‰ 1.5 1.8 2.2 2.5 3.1 3.5 3.9 4.8 42° 50° 59° 1T\ˆ 42° E\‰ 3 oz.
ⓦ ⓦ 5040 O\Á‰ 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 39° 50° 60° 1WU\´„ 45° E\‰ 3 oz.
50° ⓦ 5060 E\ŒÁ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 42° 50° 53° 2T\´„ 37° 1 5 oz.
GENERAL PURPOSE
ⓦ 50100 QT\Á‰ 6.1 7.1 8.7 10.0 12.2 14.1 15.8 19.4 43° 50° 55° 2WU\´„ 40° 1Q\‰ 11Q\„ oz.
ⓦ 50125 QU\Á‰ 7.6 8.8 10.8 12.5 15.3 17.7 19.7 24 38° 50° 59° 2WU\´„ 38° 1Q\‰ 11 oz.
ⓦ 50160 QO\Á‰ 9.8 11.3 13.9 16.0 19.6 23 25 31 44° 50° 55° 2WU\´„ 37° 1Q\‰ 11 oz.
ⓦ 50200 WQ\Á‰ 12.2 14.2 17.0 20 24 28 32 39 46° 50° 53° 2WU\´„ 32° 1Q\‰ 11 oz.
ⓦ 4040 O\Á‰ 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 31° 40° 50° 2E\ˆ 35° U\ˆ 5 oz.
ⓦ 4050 T\´„ 3.1 3.5 4.3 5.0 6.1 7.1 8.0 9.7 31° 40° 49° 2Q\„ 33° 1 7 oz.
ⓦ 4060 QQ\Á‰ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 32° 40° 49° 2WU\´„ 33° 1 8 oz.
40° ⓦ 4070 QE\Á‰ 4.3 5.0 6.1 7.0 8.6 9.9 11.0 13.5 32° 40° 49° 2EQ\´„ 29° 1 9 oz.
ⓦ 4080 QE\Á‰ 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 32° 40° 48° 3Q\´„ 26° 1 9 oz.
ⓦ 4090 U\´„ 5.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 34° 40° 44° 3Q\´„ 28° 1 8 oz.
ⓦ 40100 QT\Á‰ 6.1 7.1 8.7 10.0 12.2 14.1 15.8 19.4 35° 40° 44° 3QE\´„ 28° 1 9 oz.
ⓦ 3504 E\Á‰ .25 .28 .35 .40 .49 .57 .63 .77 20° 35° 41° WO\´„ 40° U\ŒÁ Q\„ oz.
ⓦ 3510 T\Á‰ .61 .71 .87 1.0 1.2 1.4 1.6 1.9 18° 35° 39° 1U\ŒÁ 36° T\ˆ 2 oz.
ⓦ ⓦ 3520 U\Á‰ 1.2 1.4 1.7 2.0 2.4 2.8 3.2 3.9 24° 35° 40° 1WQ\´„ 30° E\‰ 2 oz.
ⓦ 3525 U\Á‰ 1.5 1.8 2.2 2.5 3.1 3.5 3.9 4.8 24° 35° 39° 1QT\ŒÁ 28° E\‰ 3 oz.
ⓦ 3530 Q\ˆ 1.8 2.1 2.6 3.0 3.7 4.2 4.7 5.8 26° 35° 41° 2Q\ŒÁ 28° E\‰ 3 oz.
35° ⓦ 3540 O\Á‰ 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 28° 35° 38° 2O\´„ 26° U\ˆ 4 oz.
ⓦ 3550 T\´„ 3.1 3.5 4.3 5.0 6.1 7.1 8.0 9.7 31° 35° 38° 2Q\„ 23° U\ˆ 5 oz.
ⓦ 3560 QQ\Á‰ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 29° 35° 39° 2U\ˆ 27° 1 8 oz.
ⓦ 3580 QE\Á‰ 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 26° 35° 40° 3E\ŒÁ 24° 1 9 oz.
ⓦ 35100 QT\Á‰ 6.1 7.1 8.7 10.0 12.2 14.1 15.8 19.4 26° 35° 40° 3Q\„ 19° 1 9 oz.
ⓦ 35160 QO\Á‰ 9.8 11.3 13.9 16.0 19.6 23 25 31 26° 35° 40° 4Q\„ 23° 1Q\‰ 1Q\‰ lbs.
ⓦ 35200 WQ\Á‰ 12.2 14.2 17.0 20 24 28 32 39 25° 35° 40° 4QE\ŒÁ 22° 1Q\‰ 1Q\‰ lbs.
25° ⓦ 2540 O\Á‰ 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 15° 25° 34° 2O\ŒÁ 25° E\‰ 4 oz.
ⓦ 1510 T\Á‰ .71 .87 1.0 1.2 1.4 1.6 1.9 15° 23° 1U\ˆ 22° T\ˆ 2 oz.
FLAT SPRAY
ⓦ 1520 U\Á‰ 1.4 1.7 2.0 2.4 2.8 3.2 3.9 15° 19° 2Q\ˆ 19° T\ˆ 2 oz.
ⓦ 1530 Q\ˆ 1.8 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6° 15° 24° 2WU\´„ 25° E\‰ 4 oz.
ⓦ 1540 O\Á‰ 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 8° 15° 21° 3T\ˆ 18° U\ˆ 8 oz.
15° ⓦ 1550 QQ\Á‰ 3.1 3.5 4.3 5.0 6.1 7.1 8.0 9.7 9° 15° 20° 3O\ŒÁ 15° U\ˆ 6 oz.
ⓦ 1560 E\ŒÁ 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 10° 15° 19° 4QT\ŒÁ 14° 1 12 oz.
ⓦ 1580 QE\Á‰ 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 11° 15° 18° 5Q\ˆ 14° 1 12 oz.
ⓦ 15100 QT\Á‰ 6.1 7.1 8.7 10.0 12.2 14.1 15.8 19.4 11° 15° 18° 5E\ˆ 14° 1 14 oz.
ⓦ 15200 WQ\Á‰ 12.2 14.2 17.0 20 24 28 32 39 12° 15° 18° 7Q\„ 14° 1Q\‰ 1 lbs.
Material Material Code
Q no material code = Brass
Q I = Mild Steel
Q SS = 303 Stainless Steel
Q 316SS = 316 Stainless Steel
ANGLE DE
DISPERSION
DIMENSIONS
ORDERING INFORMATION
STANDARD
SPRAY NOZZLE
3/8 P - SS 5060
Inlet Nozzle Material Capacity
Connection Type Code Size
Pipe Size
SPRAY NOZZLE
WIDE ANGLE
FOR LIQUID, AIR AND STEAM
K DESIGN FEATURES COMMON APPLICATIONS
1⁄8"-1" NPT or BSPT (M) FloodJet spray nozzles feature a
wide angle flat spray pattern with
medium impact. They produce
uniform spray distributions of
medium-sized droplets.
C
47
SPRAY AGITATION
GENERAL PURPOSE
AIR & STEAM ⓦ Spraying eliminator plates
CAPACITY—in scfm CAPACITY—for COVERAGE ⓦ Cooling conveyor belts
at 6" A round orifice and large,
Capac- Orifice (standard cubic feet STEAM Distance
ity Diam. per minute) (pounds per hour) unobstructed flow passages ⓦ Film washing
from Nozzle
Size Nom. minimize clogging problems.
Inches 10 20 40 50 10 20 40 50 10 50 ⓦ Water curtain
psi psi psi psi psi psi psi psi psi psi FloodJet nozzles are also
ⓦ Fire protection
suitable for use with air and
.50 .024 .16 .22 .35 .41 .35 .49 .78 .92 2" 5"
.75 .028 .22 .31 .50 .59 .50 .70 1.1 1.3 2Q\„" 5Q\„" steam. All FloodJet nozzles offer
1 .033 .34 .48 .75 .89 .76 1.1 1.7 2.0 3" 6" a precision-machined deflector
1.5 .041 .54 .75 1.2 1.4 1.2 1.7 2.7 3.2 3Q\„" 6Q\„" surface which provides DIMENSIONS & WEIGHTS
2 .046 .68 .95 1.5 1.8 1.5 2.1 3.4 4.0 4" 7Q\„" dependable, accurate control of Based on largest/heaviest version of each type.
2.5 .052 .94 1.3 2.1 2.5 2.1 2.9 4.7 5.6 4" 7Q\„" deflection and spray angle.
3 .057 1.1 1.6 2.5 3.0 2.5 3.6 5.7 6.7 5" 8"
4 .065 1.4 2.0 3.0 3.8 3.1 4.5 6.8 8.6 5" 9" The K series FloodJet nozzles Pipe
are precision-machined from Connection
5 .073 1.9 2.6 4.2 4.9 4.2 5.9 9.3 11.0 6" 10Q\„"
7.5 .091 2.8 4.0 6.3 7.5 6.4 8.9 14.2 16.8 6" 10Q\„" solid bar stock and have a male
pipe thread inlet connection. 75°
10 .104 3.9 5.5 8.6 10.2 8.7 12.2 19.3 22.9 7" 11" Deflection
15 .129 6.4 9.0 14.3 16.8 14.3 20.2 31.9 37.7 7" 12" Angle
20 .148 7.9 11.2 17.7 20.9 17.7 25.0 39.5 46.7 8Q\„" 14Q\„" Hex.
30 .180 11.4 16.0 25.4 30.0 25.5 35.7 56.9 67.2 8Q\„" 15Q\„"
FLAT SPRAY
LIQUID K
C
48
GENERAL PURPOSE
DESIGN FEATURES
WashJet high WashJet nozzles feature foam in a 40° flat spray pattern.
pressure spray specially hardened stainless At high pressures, they produce
nozzles feature a steel construction for longer wear a high impact 40° flat spray
high impact solid life and flow control accuracy. like that of the standard MEG
stream or flat WashJet nozzle.
MEG-TC WashJet spray nozzles
spray pattern provide the same performance 23990 Adjustable WashJet
with spray angles features as standard MEG nozzle provides spray angles
of 0° to 65°. nozzles with tungsten carbide from solid stream to an 80° flat
WashJet nozzles produce a orifice inserts for maximum spray pattern to 2500 psi (175
uniform spray distribution of erosion resistance. bar). The model 23990 nozzle
medium-sized droplets. The features a hardened stainless
QCMEG nozzles include color
WashJet nozzle orifice is precision- steel orifice for wear-resistance,
coded protective nozzle guards.
machined to accurately control long life. The outer covering is
The nozzles incorporate a 1⁄4)
FLAT SPRAY
Other Accessories
ⓦ Extensions
ⓦ Swivels
ⓦ ⓦ
ⓦ ⓦ
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
ⓦ ⓦ
ⓦ ⓦ
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
065 1.8
07 1.9
075 2.1
2.1
2.2
2.4
2.3
2.5
2.7
2.5 2.7 2.9 3.3 4.0
2.7 2.9 3.1 3.5 4.3
2.9 3.1 3.4 3.8 4.6
4.6
4.9
5.3
5.1
5.5
5.9
5.6
6.1
6.5
C
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 08 2.2 2.5 2.8 3.1 3.4 3.6 4.0 4.9 5.7 6.3 6.9 49
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 085 2.3 2.7 3.0 3.3 3.6 3.8 4.3 5.2 6.0 6.7 7.4
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 09 2.5 2.9 3.2 3.5 3.8 4.0 4.5 5.5 6.4 7.1 7.8
ⓦ ⓦ ⓦ
GENERAL PURPOSE
095 2.6 3.0 3.4 3.7 4.0 4.2 4.8 5.8 6.7 7.5 8.2
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 10 2.7 3.2 3.5 3.9 4.2 4.5 5.0 6.1 7.1 7.9 8.7
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 11 3.0 3.5 3.9 4.3 4.6 4.9 5.5 6.7 7.8 8.7 9.5
ⓦ 115 3.1 3.6 4.1 4.5 4.8 5.1 5.8 7.0 8.1 9.1 10.0
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 12 3.3 3.8 4.2 4.6 5.0 5.4 6.0 7.3 8.5 9.5 10.4
ⓦ ⓦ ⓦ 125 3.4 4.0 4.4 4.8 5.2 5.6 6.3 7.7 8.8 9.9 10.8
ⓦ ⓦ ⓦ ⓦ 13 3.6 4.1 4.6 5.0 5.4 5.8 6.5 8.0 9.2 10.3 11.3
ⓦ 14 3.8 4.4 4.9 5.4 5.9 6.3 7.0 8.6 9.9 11.1 12.1
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 15 4.1 4.7 5.3 5.8 6.3 6.7 7.5 9.2 10.6 11.9 13.0
ⓦ 16 4.4 5.1 5.7 6.2 6.7 7.2 8.0 9.8 11.3 12.6 13.9
ⓦ 18 4.9 5.7 6.4 7.0 7.5 8.0 9.0 11.0 12.7 14.2 15.6
ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 20 5.5 6.3 7.1 7.7 8.4 8.9 10.0 12.3 14.1 15.8 17.3
ⓦ ⓦ ⓦ ⓦ 25 6.9 7.9 8.9 9.7 10.5 11.2 12.5 15.3 17.7 19.8 22
ⓦ ⓦ ⓦ ⓦ ⓦ 30 8.2 9.5 10.6 11.6 12.5 13.4 15.0 18.4 21 24 26
ⓦ ⓦ ⓦ ⓦ 35 9.6 11.1 12.4 13.6 14.6 15.7 17.5 21 25 28 30
ⓦ ⓦ ⓦ ⓦ 40 11.0 12.6 14.1 15.5 16.7 17.9 20 24 28 32 35
ⓦ ⓦ ⓦ ⓦ 50 13.7 15.8 17.7 19.4 21 22 25 31 35 40 43
ⓦ ⓦ ⓦ ⓦ 60 16.4 19 21 23 25 27 30 37 42 47 52
ⓦ 70 19.2 22 25 27 29 31 35 43 49 55 61
ⓦ 80 22 25 28 31 33 36 40 49 57 63 69
ⓦ 90 25 28 32 35 38 40 45 55 64 71 78
*00° = Solid Stream
FLAT SPRAY
Spray Angle at 40 psi Size 300 400 500 600 700 800 1000 1500 2000 2500 3000 3500 4000
40° SPRAY NOZZLE
*00° 15° 25° 40° psi psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ ⓦ ⓦ ⓦ 04 1.1 1.3 1.4 1.6 1.7 1.8 2.0 2.5 2.8 3.2 3.5 3.7 4.0
1/4 MEG- 15 04
ⓦ ⓦ ⓦ ⓦ 045 1.2 1.4 1.6 1.7 1.9 2.0 2.3 2.8 3.2 3.6 3.9 4.2 4.5
ⓦ ⓦ ⓦ ⓦ ⓦ 05 1.4 1.6 1.8 1.9 2.1 2.2 2.5 3.1 3.5 4.0 4.3 4.7 5.0 Inlet Nozzle Spray Capacity
Connec- Type Angle Size
ⓦ ⓦ ⓦ ⓦ 055 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.4 3.9 4.3 4.8 5.1 5.5 tion
ⓦ ⓦ ⓦ ⓦ 06 1.6 1.9 2.1 2.3 2.5 2.7 3.0 3.7 4.2 4.7 5.2 5.6 6.0 Pipe
Size
ⓦ ⓦ ⓦ ⓦ 065 1.8 2.1 2.3 2.5 2.7 2.9 3.3 4.0 4.6 5.1 5.6 6.1 6.5
ⓦ ⓦ ⓦ ⓦ ⓦ 07 1.9 2.2 2.5 2.7 2.9 3.1 3.5 4.3 4.9 5.5 6.1 6.5 7.0
ⓦ ⓦ ⓦ ⓦ 075 2.1 2.4 2.7 2.9 3.1 3.4 3.8 4.6 5.3 5.9 6.5 7.0 7.5
ⓦ ⓦ ⓦ ⓦ ⓦ 08 2.2 2.5 2.8 3.1 3.4 3.6 4.0 4.9 5.7 6.3 6.9 7.5 8.0
ⓦ ⓦ ⓦ 09 2.5 2.9 3.2 3.5 3.8 4.0 4.5 5.5 6.4 7.1 7.8 8.4 9.0
ⓦ ⓦ ⓦ ⓦ ⓦ 10 2.7 3.2 3.5 3.9 4.2 4.5 5.0 6.1 7.1 7.9 8.7 9.4 10.0
ⓦ ⓦ ⓦ ⓦ 12 3.3 3.8 4.2 4.6 5.0 5.4 6.0 7.3 8.5 9.5 10.4 11.2 12.0
*00° = Solid Stream Tabulation is based on spraying water at temperature of 70°F (21°C).
M18 x 1 Metric
10660-NY
19079-NY
7894-NY
DEVILBISS
BINKS 50
ATLAS COPCO
50 106A-12 3⁄8 N.P.S. 7894-NY SPEE-FLO
106A-13 225-13 M18 x 1 Metric 7894-NY < DEICKE &
KOPPERSCHMIDT
GENERAL PURPOSE
The RotoClean attachment is 106A-14 225-14 1-14 9632-NY S.S. CO. 44 AUA
DESIGN FEATURES small and lightweight and oper- 106A-15 225-15 11⁄16-16 12552-NY BINKS 43
106A-16 225-16 5
⁄8-14 BSPP 11918-NY
The RotoClean attachment pro- ates at pressures up to 4000 psi 106A-17 220A-17 225-17 11⁄16-16 13358-NY WAGNER
vides a quick and easy method (275 bar). Models are available to
*Use Gasket No. 7894-NY for 106A-3
of unclogging spray tips without fit all leading brands of airless **Use Gasket No. 12552-NY for 106A-10
removing them from the spray spray guns.
gun in airless painting and high ORDERING INFORMATION
pressure spraying applications. COMPLETE 220A ROTOCLEAN ASSEMBLY
The RotoClean attaches to INSERT KITS ROTOCLEAN CYLINDER
NUMBER SUB-ASSEMBLY
the spray gun and includes a For For
tungsten carbide orifice insert
which can be rotated 180° by the
106A 220A AA 220A-2 + 18130-RC 2F
RotoClean handle to face the Cylinder
Sub-Assembly
opposite direction. This rotation
allows obstruction to be blown COMPLETE 106A ROTOCLEAN ASSEMBLY
out the larger opening in the ROTOCLEAN ORIFICE
back of the tip as liquid passes NUMBER INSERT KIT
through the spray gun.
AA 106A-2 + RC 2F
Orifice
FLAT SPRAY
WG WG .013 .09 .12 .15 .18 16Q\„" 9S .067 2.5 3.5 4.3 5.0 23"
WH WH .015 .12 .16 .20 .23 17" 9T .072 2.8 4.0 4.9 5.7 23"
WI WI .016 .14 .20 .24 .28 18" 9U .076 3.2 4.5 5.5 6.4 23"
WJ WJ .018 .18 .25 .30 .36 19" 9V .078 3.5 5.0 6.1 7.1 23"
WK WK .021 .24 .33 .41 .47 21" 9W .085 3.9 5.5 6.7 7.8 23"
WA WA .023 .28 .40 .49 .57 22" 9X .089 4.3 6.0 7.4 8.5 23"
WL WL .026 .35 .50 .61 .72 23" 9Z .099 5.3 7.5 9.2 10.6 23"
WM WM .031 .53 .75 .91 1.1 25" 8E 8E .009 .039 .055 .067 .078 10Q\„"
WN WN .036 .71 1.0 1.2 1.4 26" 8F 8F .011 .06 .08 .10 .12 11Q\„"
WO .043 1.1 1.5 1.8 2.1 27" 8G 8G .013 .09 .12 .15 .18 12Q\„"
WP .052 1.4 2.0 2.5 2.8 28" 8H 8H .015 .12 .16 .20 .23 13"
WQ .057 1.8 2.5 3.1 3.5 28" 8I 8I .016 .14 .20 .24 .28 14"
WR .062 2.1 3.0 3.7 4.2 28" 8J 8J .018 .18 .25 .30 .36 15"
WS .067 2.5 3.5 4.3 5.0 28" 8K 8K .021 .24 .33 .41 .47 17"
WT .072 2.8 4.0 4.9 5.7 28" 8A 8A .023 .28 .40 .49 .57 17"
* Tabulated capaci- WU .076 3.2 4.5 5.5 6.4 28" 8L 8L .026 .35 .50 .61 .72 19"
ties based on water. WV .078 3.5 5.0 6.1 7.1 28" 8M 8M .031 .53 .75 .91 1.1 19"
WX .089 4.3 6.0 7.4 8.5 28" 8N 8N .036 .71 1.0 1.2 1.4 19"
** SPRAY PATTERN 9F 9F .011 .06 .08 .10 .12 13" 8O .043 1.1 1.5 1.8 2.1 19"
WIDTH IS BASED 9G 9G .013 .09 .12 .15 .18 14" 8P .052 1.4 2.0 2.5 2.8 19"
ON LIQUID WITH 9H 9H .015 .12 .16 .20 .23 15" 8Q .057 1.8 2.5 3.1 3.5 19"
VISCOSITY of 20 9I 9I .016 .14 .20 .24 .28 16" 8R .062 2.1 3.0 3.7 4.2 19"
seconds #4 Zahn 9J 9J .018 .18 .25 .30 .36 17" 8S .067 2.5 3.5 4.3 5.0 19"
Cup…spraying at 9K 9K .021 .24 .33 .41 .47 19" 8T .072 2.8 4.0 4.9 5.7 19"
110 bar. Coverages 9A 9A .023 .28 .40 .49 .57 19" 8U .076 3.2 4.5 5.5 6.4 19"
will vary with 9L 9L .026 .35 .50 .61 .72 21" 8V .078 3.5 5.0 6.1 7.1 19"
viscosities and 9M 9M .031 .53 .75 .91 1.1 21" 8W .085 3.9 5.5 6.7 7.8 19"
pressures. 9N 9N .036 .71 1.0 1.2 1.4 22" 8X .089 4.3 6.0 7.4 8.5 19"
9O .043 1.1 1.5 1.8 2.1 22" *** .093 4.6 6.5 8.0 9.2 19"
***Available on 9P .052 1.4 2.0 2.5 2.8 23" *** .096 4.9 7.0 8.6 9.9 19"
special request. 9Q .057 1.8 2.5 3.1 3.5 23" 8Z .099 5.3 7.5 9.2 10.6 19"
9R .062 2.1 3.0 3.7 4.2 23"
7G 7G .012 .08 .11 .14 .16 11Q\„"
7I 7I .016 .14 .20 .24 .28 13"
RotoClean® ASSEMBLIES (CONT.)
PERFORMANCE DATA
RotoClean KITS CAPACITY* Approx.** RotoClean KITS Equiv- CAPACITY* Approx.**
Equiv- Spray Pattern
for 106A for 220A alent (gallons per minute) Spray Pattern for 106A for 220A alent (gallons per minute)
Width Orifice Width
Orifice (at 1 foot
Orifice Cylinder Diam. 500 1000 1500 2000 (at 1 foot Orifice Cylinder Diam. 500 1000 1500 2000
Insert Kit
6D
Sub-Asb. Inches
6D .007
psi
.028
psi
.04
psi
.049
psi
.057
distance)
8Q\„"
Insert Kit
3B
Sub-Asb. Inches
3B .005
psi
.014
psi
.020
psi psi
.025
distance)
.028 5"
C
6E 6E .009 .039 .055 .067 .078 9Q\‰" 3C 3C .006 .021 .030 .037 .042 5" 51
6F 6F .011 .06 .08 .10 .12 10" 3D 3D .007 .028 .040 .049 .057 5Q\„"
6G 6G .013 .09 .12 .15 .18 10Q\„" 3E 3E .009 .039 .055 .067 .078 5Q\„"
GENERAL PURPOSE
6H 6H .015 .12 .16 .20 .23 11" 3F 3F .011 .06 .08 .10 .12 6"
6I 6I .016 .14 .20 .24 .28 12" 3G 3G .013 .09 .12 .15 .18 6"
*** *** .017 .16 .22 .27 .31 12Q\„" 3H 3H .015 .12 .16 .20 .23 7"
6J 6J .018 .18 .25 .30 .36 13" 3I 3I .016 .14 .20 .24 .28 7"
*** *** .019 .19 .28 .34 .39 13" 3J 3J .018 .18 .25 .30 .36 7"
6K 6K .021 .24 .33 .41 .47 15" *** *** .019 .19 .28 .34 .39 7"
6A 6A .023 .28 .40 .49 .57 15" 3K 3K .021 .24 .33 .41 .47 8"
6L 6L .026 .35 .50 .61 .72 16" 3A 3A .023 .28 .40 .49 .57 8Q\„"
6M 6M .031 .53 .75 .91 1.1 16" 3L 3L .026 .35 .50 .61 .72 9"
6N 6N .036 .71 1.0 1.2 1.4 16" 3M 3M .031 .53 .75 .91 1.1 9"
6O .043 1.1 1.5 1.8 2.1 16" 3N 3N .036 .71 1.0 1.2 1.4 9"
6P .052 1.4 2.0 2.5 2.8 16" 3O .043 1.1 1.5 1.8 2.1 9"
6Q .057 1.8 2.5 3.1 3.5 16" 3P .052 1.4 2.0 2.5 2.8 9"
6R .062 2.1 3.0 3.7 4.2 16" 3R .062 2.1 3.0 3.7 4.2 9"
6S .067 2.5 3.5 4.3 5.0 16" 3T .072 2.8 4.0 4.9 5.7 9"
6T .072 2.8 4.0 4.9 5.7 16" 2B 2B .005 .014 .020 .025 .028 4"
6U .076 3.2 4.5 5.5 6.4 16" 2C 2C .006 .021 .030 .037 .042 4"
6V .078 3.5 5.0 6.1 7.1 16" 2D 2D .007 .028 .040 .049 .057 4Q\„"
6W .085 3.9 5.5 6.7 7.8 16" 2E 2E .009 .039 .055 .067 .078 4Q\„"
6X .089 4.3 6.0 7.4 8.5 16" 2F 2F .011 .06 .08 .10 .12 5"
*** .093 4.6 6.5 8.0 9.2 16" 2G 2G .013 .09 .12 .15 .18 5"
*** .096 4.9 7.0 8.6 9.9 16" 2H 2H .015 .12 .16 .20 .23 5Q\„"
6Z .099 5.3 7.5 9.2 10.6 16" 2I 2I .016 .14 .20 .24 .28 6"
5D 5D .007 .028 .04 .049 .057 7E\‰" *** *** .017 .16 .22 .27 .31 6"
5E 5E .009 .039 .055 .067 .078 8" 2J 2J .018 .18 .25 .30 .36 6"
2K 2K .021 .24 .33 .41 .47 6Q\„"
FLAT SPRAY
5F 5F .011 .06 .08 .10 .12 8Q\„"
5G 5G .013 .09 .12 .15 .18 9" 2A 2A .023 .28 .40 .49 .57 7"
5H 5H .015 .12 .16 .20 .23 10" 2L 2L .026 .35 .50 .61 .72 7"
5I 5I .016 .14 .20 .24 .28 10Q\„" 2M 2M .031 .53 .75 .91 1.1 7"
*** *** .017 .16 .22 .27 .31 10Q\„" 2N 2N .036 .71 1.0 1.2 1.4 7"
5J 5J .018 .18 .25 .30 .36 11" 2O .043 1.1 1.5 1.8 2.1 7"
*** *** .019 .19 .28 .34 .39 11" 2P .052 1.4 2.0 2.5 2.8 7"
5K 5K .021 .24 .33 .41 .47 12" 2Q .057 1.8 2.5 3.1 3.5 7"
5A 5A .023 .28 .40 .49 .57 13" 2R .062 2.1 3.0 3.7 4.2 7"
5L 5L .026 .35 .50 .61 .72 14" 2T .072 2.8 4.0 4.9 5.7 7"
5M 5M .031 .53 .75 .91 1.1 14" 1B 1B .005 .014 .020 .025 .028 3"
5N 5N .036 .71 1.0 1.2 1.4 14" 1D 1D .007 .028 .040 .049 .057 3Q\„"
5O .043 1.1 1.5 1.8 2.1 14" 1E 1E .009 .039 .055 .067 .078 3Q\„"
5P .052 1.4 2.0 2.5 2.8 14" 1F 1F .011 .06 .08 .10 .12 4"
5Q .057 1.8 2.5 3.1 3.5 14" 1G 1G .013 .09 .12 .15 .18 4"
5R .062 2.1 3.0 3.7 4.2 14" 1H 1H .015 .12 .16 .20 .23 4Q\„"
5S .067 2.5 3.5 4.3 5.0 14" 1I 1I .016 .14 .20 .24 .28 5"
5T .072 2.8 4.0 4.9 5.7 14" 1J 1J .018 .18 .25 .30 .36 5"
5V .078 3.5 5.0 6.1 7.1 14" 1K 1K .021 .24 .33 .41 .47 5Q\„"
5Z .099 5.3 7.5 9.2 10.6 14" 1A 1A .023 .28 .40 .49 .57 5Q\„"
4B 4B .005 .014 .020 .025 .028 6Q\„" 1L 1L .026 .35 .50 .61 .72 6"
4C 4C .006 .021 .030 .037 .042 6Q\„" 1M 1M .031 .53 .75 .91 1.1 6"
4D 4D .007 .028 .040 .049 .057 6Q\„" 1N 1N .036 .71 1.0 1.2 1.4 6"
4E 4E .009 .039 .055 .067 .078 7" 0B 0B .005 .014 .020 .025 .028 2Q\„"
4F 4F .011 .06 .08 .10 .12 7Q\„" 0D 0D .007 .028 .040 .049 .057 2Q\„"
4G 4G .013 .09 .12 .15 .18 8" 0E 0E .009 .039 .055 .067 .078 2Q\„"
4H 4H .015 .12 .16 .20 .23 8Q\„" 0F 0F .011 .06 .08 .10 .12 3"
4I 4I .016 .14 .20 .24 .28 9" 0G 0G .013 .09 .12 .15 .18 3"
*** *** .017 .16 .22 .27 .31 9Q\„" 0H 0H .015 .12 .16 .20 .23 3Q\„"
4J 4J .018 .18 .25 .30 .36 10" 0I 0I .016 .14 .20 .24 .28 4"
*** *** .019 .19 .28 .34 .39 10" 0J 0J .018 .18 .25 .30 .36 4"
4K 4K .021 .24 .33 .41 .47 11" 0K 0K .021 .24 .33 .41 .47 4"
4A 4A .023 .28 .40 .49 .57 11" 0L 0L .026 .35 .50 .61 .72 4"
4L 4L .026 .35 .50 .61 .72 12" 0M 0M .031 .53 .75 .91 1.1 4"
*** *** .029 .46 .65 .80 .92 12" 0N 0N .036 .71 1.0 1.2 1.4 4"
4M 4M .031 .53 .75 .91 1.1 12"
4N 4N .036 .71 1.0 1.2 1.4 12"
4O .043 1.1 1.5 1.8 2.1 12"
4P .052 1.4 2.0 2.5 2.8 12"
4Q .057 1.8 2.5 3.1 3.5 12" * Tabulated capacities based on water.
4R .062 2.1 3.0 3.7 4.2 12" ** SPRAY PATTERN WIDTH IS BASED ON LIQUID WITH VISCOSITY of 20 seconds #4
4S .067 2.5 3.5 4.3 5.0 12" Zahn Cup …spraying at 110 bar. Coverages will vary with viscosities and pressures.
4T .072 2.8 4.0 4.9 5.7 12" *** Available on special request.
4U .076 3.2 4.5 5.5 6.4 12"
4Z .099 5.3 7.5 9.2 10.6 12"
ATTACHMENTS
FOR AIRLESS SPRAY PAINTING GUNS
INDEX
FogJet®
Large Capacity/Wide Angle 7N, 7G.................C54
Hydraulic Atomizing
Fine Spray/Hollow Cone LN, LNN-W, LN-D,
N, NW, M............ C55
FogJet®
Large Capacity/Narrow Angle FF, F.................... C56
SPRAY NOZZLES
LARGE CAPACITY/WIDE ANGLE
SMALL DROPLET SIZE/MULTIPLE ORIFICE/FULL CONE
7N 7G Inlet DIMENSIONS
CAPACITY
(gallons per minute)
NPT or Nozzle Capacity
BSPT Type
atomizing spray caps FullJet spray caps Size A B C 20 40 60 80 100 125 150
1) NPT or BSPT (F) 34 ⁄ )-11⁄2) NPT or BSPT (F) Feet Feet Feet psi psi psi psi psi psi psi
.60 3* 31⁄2 11⁄2 .11 .12 .14
7N 1 3* 4 2 .12 .14 .16 .18 .21 .23
C 1.5
2
3*
3*
41⁄2
41⁄2
21⁄2
21⁄2
.17
.23
.21
.29
.25
.33
.28
.37
.31
.41
.34
.45
54 3 3* 51⁄2 31⁄2 .25 .35 .43 .50 .55 .62 .68
4 3* 51⁄2 31⁄2 .33 .47 .57 .66 .74 .83 .90
6 3* 6 4 .50 .70 .86 .98 1.1 1.2 1.4
GENERAL PURPOSE
Each cap has an internal core cap has an internal vane which 7G 1
5 61⁄2 41⁄4
.98 1.3 1.6 1.8 2.1 2.3 2.5
8 7 ⁄2
1 43⁄4
which is easily removed for is easily removed and replaced. 11 8 51⁄4
cleaning or replacement. 3 8 51⁄2
5 9 61⁄2
1.5 8 10 71⁄2 1.5 2.0 2.4 2.8 3.1 3.4 3.7
3/4 11 10 ⁄2
1 73⁄4
3 81⁄2 51⁄2
5 10 61⁄2
3 8 11 7 2.9 4.0 4.8 5.5 6.2 6.8 7.4
11 111⁄2 71⁄2
FINE SPRAY
A C B
3 91⁄2 6 ⁄4
1
5 11 7
5 8 12 73⁄4 4.8 6.7 8.1 9.2 10.3 11.3 12.4
11 121⁄2 8
3 11 91⁄2
5 121⁄2 10
10 8 131⁄2 11 9.8 13.5 16.4 18.9 21.0 23 25
11 14 12
1
DIMENSIONS & WEIGHTS 3
5
12
131⁄4
10
11
Based on largest/heaviest version of each type. 12.5 8 14 12 12 17 20 23 25 28 30
11 141⁄2 121⁄2
Pipe 3 133⁄4 9
Conn. H D Net 5 16 101⁄2
Nozzle No. NPT or 25 24 34 41 47 52 57 62
Inches Inches Weight 8 17 11
BSPT
11 171⁄2 111⁄2
3/4-7G1 34
⁄ 125⁄32 21⁄16 12 oz. 3 133⁄4 9
thru 3/4-7G3
5 16 101⁄2
3/4-7G5 34
⁄ 113⁄16 21⁄8 12 oz. 30 8 17 11 29 40 48 55 62 68 74
1
1-7G10 oder 11 171⁄2 111⁄2
1 2⁄3 16 2 ⁄
11 16 1 ⁄ lbs.
12
thru 1-7G12.5 1-1/2 3 133⁄4 9
1-7G25 5 16 101⁄2
1 35⁄16 41⁄16 31⁄2 lbs. 32 8 17 11 31 43 52 59 66 74 79
thru 1-7G40
11 171⁄2 111⁄2
1-1/2-7G25
11⁄2 3 4 33⁄4 lbs. 3 133⁄4 9
thru 1-1/2-7G45
5 16 101⁄2
1-1/2-7G50 11⁄2 33⁄16 41⁄4 31⁄2 lbs. 40 8 17 11 39 53 64 74 83 92 100
All 1-7N 1 23⁄32 21⁄2 11⁄2 lbs. 11 171⁄2 111⁄2
3 14 91⁄2
5 161⁄2 11
45 44 60 72 82 91 100 110
ORDERING INFORMATION 8 171⁄2 12
11 18 121⁄2
1-1/2
STANDARD Material Codes 3 141⁄2 101⁄2
SPRAY NOZZLE no material code = Brass 50
5 17 12
48 67 81 92 103 113 124
8 18 131⁄2
SS = 303 Stainless Steel 11 19 14
1-1/2 - 7G - SS 30 316SS = 316 Stainless Steel *And Up
Inlet Nozzle Material Capacity
Connection Type Code Size
Pipe Size
Hydraulic Atomizing NOZZLES
FINE ATOMIZING SPRAYS/HOLLOW CONE
C
55
GENERAL PURPOSE
M series atomizing nozzles LN-D and LNN-D series nozzles
DESIGN FEATURES feature a !\›" NPT or BSPT (M) offer a !\›" NPT or BSPT (M)
Fine spray atomizing nozzles use inlet connection and a remov- wall-mount design as well as a
the liquid pressure alone to pro- able core for easy cleaning or built-in strainer.
duce very finely atomized droplets replacement. ML series nozzles N-W and NN-W series nozzles
in a hollow cone spray pattern are supplied with strainers. feature the same construction
with uniform distribution, often N and NN series atomizing as N series nozzles with an extra
achieving misting performance. nozzles consist of a nozzle body, wide spray angle. LN-W and
All parts are precision-machined. an orifice insert in a cap, and a LNN-W series nozzles are
Orifice inserts, cores, and core. LN and LNN series nozzles supplied with strainers.
strainers are easily removed for are equipped with strainers. Note: Core and orifice inserts
inspection or cleaning. are stainless steel.
NOZZLE NO. Orifice CAPACITY (gallons per hour) SPRAY ANGLE
Type LN Type LNN Type LND Type LNND Type N Type NN Type M Diam. Core
Female Male Female Male Female Male Male Nom. No. 30 40 60 100 200 300 500 700 1000 40 80 300
Inches psi psi psi psi psi psi psi psi psi psi psi psi
Conn. Conn. Conn. Conn. Conn. Conn. Conn.
⁄ LN.60
14 ⁄ LNN.60
14 ⁄ LND.60
14 ⁄ LNND.60
14 ⁄ N.60
14 ⁄ NN.60
14
.016 206 .95 1.3 1.6 2.1 2.5 3.0 35° 65°
FINE SPRAY
⁄ LN1
14 ⁄ LNN1
14 ⁄ LND1
14 ⁄ LNND1
14 ⁄ N1
14 ⁄ NN1
14 ⁄ M1
14
.020 210 1.0 1.2 1.6 2.2 2.7 3.5 4.2 5.0 45° 62° 72°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN1.5 LNN1.5 LND1.5 LNND1.5 N1.5 NN1.5 M1.5 .020 216 1.3 1.5 1.8 2.4 3.4 4.1 5.3 6.3 7.5 65° 70° 72°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN2 LNN2 LND2 LNND2 N2 NN2 M2 .028 216 1.7 2.0 2.5 3.2 4.5 5.5 7.1 8.4 10.0 70° 75° 77°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN3 LNN3 LND3 LNND3 N3 NN3 M3 .028 220 2.6 3.0 3.7 4.7 6.7 8.2 10.6 12.5 15.0 65° 70° 73°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN4 LNN4 LND4 LNND4 N4 NN4 M4 .042 220 3.5 4.0 4.9 6.3 9.0 11.0 14.2 16.7 20 72° 81° 84°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN6 LNN6 LND6 LNND6 N6 NN6 M6 .042 225 5.2 6.0 7.3 9.5 13.4 16.5 21 25 30 73° 79° 81°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN8 LNN8 LND8 LNND8 N8 NN8 M8 .060 225 6.9 8.0 9.8 12.6 17.9 22 28 34 40 85° 89° 91°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN10 LNN10 LND10 LNND10 N10 NN10 M10 .064 420 8.6 10.0 12.2 15.8 22 27 35 42 50 82° 84° 86°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN12 LNN12 LND12 LNND12 N12 NN12 M12 .076 420 10.4 12.0 14.7 19.0 27 33 43 50 60 78° 82° 85°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN14 LNN14 LND14 LNND14 N14 NN14 M14 .076 421 12.1 14.0 17.1 22 31 38 50 59 70 85° 88° 90°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN18 LNN18 LND18 LNND18 N18 NN18 M18 .076 422 15.6 18.0 22 29 40 49 64 75 90 81° 84° 86°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN22 LNN22 LND22 LNND22 N22 NN22 M22 .076 625 19.1 22 27 35 49 60 78 92 110 70° 72° 75°
1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄ 4 1⁄4
LN26 LNN26 LND26 LNND26 N26 NN26 M26 .086 625 23 26 32 41 58 71 92 109 130 73° 74° 77°
Standard Materials Material Code
Q Q Q Q Q Q Q no material code = Brass COMMON APPLICATIONS
Q Q Q Q Q Q Q SS = 303 Stainless Steel
Q Q Q Q Q ⓦ Evaporative cooling
316SS = 316 Stainless Steel
Q Q ⓦ Moistening
PVC = Polyvinyl Chloride
C
56
GENERAL PURPOSE
section D
INDEX
Air Atomizing Nozzles Air Atomizing Nozzles
Basic Nozzle Installations and How to Order.... D2, D3 1/2J (Basic Nozzle Parts & Assemblies)................ D16
Air Atomizing Nozzles Pressure Spray Set-Ups
1/8J & 1/4J (Basic Nozzle Parts & Assemblies)...... D4 1/2J - Wide-Angle Round, Round & Flat Spray .... D17
Air Atomizing Nozzle Body Assemblies Spray Set-Ups
1/8J & 1/4J - W/Strainer, Miniature, Back Connect, 1/2J - Flat Spray (External Mix), 360° Circular
Extensions, Top Inlet, Steam Jacket, Thick Walls, Spray, Siphon Set-ups - Round Spray .................. D18
Thin Walls, Screw Mount, Top Inlet, 20470
Lube Gun, Swivel, Cluster Type, Twin Spray.......... D5 Air Atomizing Nozzles
1J (Basic Nozzle Parts & Assemblies)................... D19
Pressure Spray Set-Ups
1/8J & 1/4J - Round Spray, Deflected Flat Pressure Spray Set-Ups
Spray, Wide Angle Round Spray, 1J - Wide-Angle Round, Round & Flat Spray........ D20
360° Circular Spray, Flat Spray.................. D6, D7, D8 Spray Set-Ups
Siphon/Gravity-Fed Spray Set-Ups 1J - Flat Spray (External Mix),
1/8J & 1/4J - Round Spray, Flat Spray..................... D9 Siphon Set-up - Round Spray.................................D21
Pressure Spray Set-Ups (External Mix) JAU Automatic Air Actuated
1/8J & 1/4J - Flat Spray ....................................D10, 11 Nozzles Assemblies.....................................D22, D23
Air Atomizing Nozzles Automatic Adjustable AutoJet
1/8JJ (Basic Nozzle Parts & Assemblies)............... D12 Nozzle Assembly...................................................D24
Pressure Spray Set-Ups
Automatic Air Actuated Nozzles Assemblies... D25
1/8JJ - Round Spray, 360° Circular Spray,
Wide-Angle Round Spray, Flat Spray............ D13, D14 Humidification Nozzles.........................................D26
Siphon/Gravity-Fed Spray Set-Ups Humidification & Fluid Line
1/8JJ - Round Spray, Flat Spray............................. D15 Accessories................................................... D27-D28
Air Atomizing
D NOZZLES
2
AIR AIR
INLET INLET
LIQUID CONTAINER
LIQUID SHUT-OFF
LIQUID REGULATOR VALVE
AND GAUGE
TW
LIQUID STRAINER
The liquid is supplied to the nozzle under The liquid is supplied by either a liquid
pressure. Air and liquid can be externally or siphon or gravity feed. These set-ups are
internally mixed to produce a completely designed to draw liquid through the feed
atomized spray. line into the air flow where it is atomized.
Pages D4 - D11 Pages D12 - D15 Pages D16 - D18 Pages D19 - D21
D
3
AIR ATOMIZING
For complete nozzle assembly…in any nozzle series SS = 303 Stainless Steel
SSBR = Specifies Nickel-plated
NOZZLE BODY Brass Air Cap and
ASB., RETAINER SPRAY SET-UP 303 Stainless Steel
& GASKET Fluid Cap
316SS = 316 Stainless Steel
1/4 JN - SS + SU11 - SS LUC‡ = Lucite
PVC‡ = Polyvinyl Chloride
INLET CONN. NOZZLE BODY MATERIAL CODE SPRAY MATERIAL CODE
PIPE SIZE ASB. TYPE (BODY & RETAINER) SET-UP NO. (AIR & FLUID CAPS)
Air Fluid
Cap Cap
Air Atomizing
D NOZZLES
4
+
AIR ATOMIZING
PLUG
NO. 1159
MODEL 1/8J
MODEL 1/4J
SPRAY SET-UP
+
SHUT-OFF NEEDLE
MODEL 1/8JN ASSEMBLY
MODEL 1/4JN = + + + + + + NO. 12810
+
1 2 3 4 5 6
CLEAN-OUT NEEDLE
MODEL 1/8JCO ASSEMBLY
MODEL 1/4JCO NO. 11829
1. RETAINER RING – NO. 1158
2. AIR CAP
3. FLUID CAP +
4. FLUID CAP GASKET– NO. 3612
SHUT-OFF/CLEAN-OUT
5. NOZZLE BODY–NO. 1151 NEEDLE ASSEMBLY
MODEL 11005-1/8J
MODEL 11005-1/4J 6. BACK SEAL GASKET – NO. 10439 NO. 11140
NOZZLE
GENERAL INFORMATION PAGE
SERIES
Air Atomizing
NOZZLE ASSEMBLIES D
5
AIR ATOMIZING
4922-1 7545
Air Atomizing
D PRESSURE SPRAY SET-UPS
6
Fluid Cap
DESIGN FEATURES Air Cap
For the Round Spray pattern,
angle “A” is maintained through-
AIR ATOMIZING
ROUND
out distance “B”. Beyond “B”, the SPRAY
spray becomes turbulent and will PATTERN
project out to distance “D”. 3612 Gasket
ROUND SPRAY
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute) SPRAY DIMENSIONS
Spray Set-up
Spray Consists of LIQUID PRESSURE in psi (pounds per square inch)
Spray
Set-up Fluid and 10 psi 20 psi 30 psi 40 psi 60 psi Air Liquid Angle B D
No. Air Cap Air Air Air Air Air psi psi A in. feet
Combination Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Deg.
psi psi psi psi psi
10 .66 .55 14 1.50 .40 24 1.68 .56 32 1.86 .68 50 2.28 .98
Fluid Cap 12 .48 .67 18 1.23 .50 28 1.44 .63 36 1.62 .80 54 2.05 1.07 12 10 13° 12" 9'
2050 14 .36 .78 22 .99 .63 32 1.08 .82 40 1.32 .93 58 1.80 1.19 24 20 13° 13" 10'
SU11 + 24 .86 .70 36 .84 .96 44 1.08 1.07 62 1.56 1.36 36 30 13° 14" 11'
Air Cap 26 .72 .76 38 .72 1.03 48 .85 1.23 66 1.32 1.52 44 40 14° 15Q\„" 12Q\„'
67147 28 .60 .82 40 .66 1.11 50 .72 1.33 68 1.23 1.58 62 60 15° 17Q\„" 14Q\„'
30 .45 .93 42 .54 1.19 52 .66 1.38 70 1.11 1.66
10 .66 .66 18 1.44 .87 24 1.98 1.00 30 2.40 1.14 40 3.30 1.36
Fluid Cap 12 .54 .77 20 1.32 .98 28 1.68 1.17 34 2.16 1.29 46 2.94 1.54 12 10 12° 17" 12'
2050 14 .42 .90 22 1.20 1.06 32 1.44 1.35 38 1.92 1.47 52 2.58 1.83 20 20 13° 18" 13'
SU12A + 24 1.08 1.16 34 1.32 1.46 42 1.62 1.68 58 2.28 2.09 34 30 13° 19" 14'
Air Cap 26 .90 1.26 36 1.20 1.57 44 1.50 1.78 62 2.10 2.26 42 40 13° 20" 15'
73160 38 1.11 1.66 46 1.38 1.88 66 1.86 2.46 58 60 15° 22" 17'
40 1.02 1.76 48 1.32 1.98 70 1.68 2.67
12 1.26 .73 22 2.16 1.05 30 2.90 1.24 36 4.32 1.26 48 5.82 1.50
Fluid Cap 16 1.08 .94 26 1.74 1.26 34 2.46 1.42 40 3.85 1.36 52 5.28 1.65 22 10 12° 19" 13'
2850 20 .90 1.15 30 1.44 1.47 38 2.10 1.65 44 3.55 1.56 56 4.92 1.73 34 20 13° 20" 14'
SU12 + 22 .81 1.25 34 1.26 1.67 42 1.74 1.87 48 2.80 1.78 60 4.56 1.88 42 30 13° 21" 15'
Air Cap 24 .78 1.36 38 1.08 1.87 46 1.50 2.03 52 2.46 2.01 64 4.08 2.08 48 40 14° 22" 16'
73160 26 .77 1.43 40 1.02 1.96 50 1.24 2.25 56 2.16 2.20 68 3.72 2.25 60 60 15° 23Q\„" 17Q\„'
28 .76 1.56 42 .94 2.04 52 1.20 2.36 60 1.86 2.36 70 3.60 2.34
16 3.44 2.68 28 5.03 3.71 40 6.10 4.72 48 7.75 5.30 65 10.7 6.74
Fluid Cap 20 2.35 3.20 32 3.70 4.17 44 5.03 5.17 55 5.95 6.07 75 8.67 7.73 24 10 18° 26" 16'
40100 22 1.90 3.46 36 2.64 4.65 48 3.95 5.65 65 3.55 7.28 80 7.65 8.25 40 20 20° 30" 20'
SU22B + 24 1.54 3.70 40 1.85 5.13 55 2.30 6.50 75 1.95 8.50 85 6.65 8.80 55 30 20° 32" 22'
Air Cap 26 1.23 3.97 44 1.30 5.63 60 1.56 7.12 80 1.40 9.10 90 5.64 9.40 75 40 21° 36" 26'
1401110 28 .96 4.22 48 .90 6.10 65 1.08 7.75 85 1.00 9.70 95 4.63 10.0 85 60 21° 38" 30'
30 .72 4.48 50 .76 6.36 70 .73 8.35 90 .72 10.3 100 3.62 10.6
12 8.1 2.00 20 13.6 2.55 30 16.3 3.25 38 19.5 3.74 54 25.7 4.66
Fluid Cap 14 6.6 2.32 22 12.0 2.85 34 13.1 3.75 42 16.5 4.20 60 21.8 5.34 14 10 17° 24" 16'
60100 16 4.9 2.66 24 10.2 3.15 38 9.9 4.32 46 13.6 4.71 65 18.5 5.98 26 20 18° 27" 19'
SU22 + 18 3.4 3.00 26 8.6 3.45 40 8.7 4.61 50 10.8 5.30 70 15.2 6.68 40 30 20° 30" 22'
Air Cap 28 7.2 3.75 42 7.6 4.90 52 9.6 5.58 75 12.2 7.80 50 40 20° 31" 23'
1401110 30 5.9 4.05 44 6.6 5.20 54 8.6 5.85 80 10.0 8.14 70 60 21° 36" 28'
32 4.6 4.35 46 5.6 5.50 56 7.6 6.14 85 8.0 8.90
14 11.7 3.05 20 27.5 3.04 28 36.6 3.55 32 49.4 3.31 42 70.6 3.17
Fluid Cap 16 8.5 3.60 22 23.0 3.49 30 32.6 3.96 36 42.2 4.10 46 65.0 3.85 14 10 19° 35" 20'
100150 24 18.0 3.95 32 28.7 4.36 40 35.1 4.90 50 59.0 4.63 24 20 20° 39" 23'
SU42 + 26 14.4 4.40 34 24.8 4.78 44 28.0 5.66 54 53.2 5.40 34 30 21° 41" 25'
Air Cap 28 11.3 4.85 36 20.9 5.20 46 24.5 6.05 58 47.4 6.16 44 40 21° 42" 26'
1891125 38 17.5 5.60 48 21.3 6.45 65 37.8 7.54 54 60 22° 46" 30'
40 14.6 6.03 50 18.4 6.86 70 30.0 8.55
Air Atomizing
PRESSURE SPRAY SET-UPS D
7
Fluid Cap
DESIGN FEATURES Air Cap
For the Wide-Angle Round
Spray, dimensions “A”, “B”, and
AIR ATOMIZING
WIDE-ANGLE
“C” are the pattern widths at
ROUND
distances from the nozzle as SPRAY PATTERN
shown. The total distance of
6" 3612 Gasket
spray projection from the nozzle
9"
to the maximum dispersal point 15"
is represented by “D”. 1158 Retainer Ring
Air Atomizing
D PRESSURE SPRAY SET-UPS
8
Fluid Cap
DESIGN FEATURES
Air Cap
For the Flat Spray pattern, dimen-
sions “A”, “B”, and “C” are the
AIR ATOMIZING
FLAT SPRAY
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)
Spray Set-up
LIQUID PRESSURE in psi (pounds per square inch) SPRAY DIMENSIONS
Spray Consists of
Set-up Fluid and 10 psi 20 psi 30 psi 40 psi 60 psi
No. Air Cap Air Air Air Air Air Air Liquid A B C D
Combination Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm
psi psi psi psi psi psi psi in. in. in. feet
10 1.44 .84 18 2.17 1.12 28 2.49 1.47 38 2.77 1.84 55 3.41 2.43 16 10 10" 14" 18" 8Q\„'
Fluid Cap 12 1.25 .96 22 1.82 1.31 32 2.19 1.64 42 2.49 2.01 65 2.83 2.85 30 20 14" 19" 26" 10'
2050 14 1.09 1.08 26 1.50 1.50 36 1.89 1.82 46 2.20 2.19 75 2.26 3.26 40 30 15" 21" 30" 10Q\„'
SU13A + 16 .93 1.20 30 1.20 1.68 40 1.58 2.00 50 1.93 2.37 85 1.69 3.67 50 40 18Q\„" 24" 34" 11'
Air Cap 18 .79 1.32 34 .93 1.87 44 1.30 2.18 60 1.25 2.81 90 1.40 3.88 85 60 22" 29" 37" 13'
73328 20 .65 1.43 38 .68 2.07 48 1.03 2.36 65 .93 3.02 95 1.13 4.09
22 .53 1.55 40 .57 2.16 55 .65 2.68 70 .65 3.25 100 .88 4.29
12 2.17 .70 20 3.35 .96 30 3.98 1.27 38 4.66 1.49 65 4.8 2.38 16 10 14" 18" 28" 7'
Fluid Cap 14 1.80 .82 24 2.71 1.14 34 3.41 1.45 42 4.14 1.65 70 4.21 2.62 30 20 17" 24" 32" 8'
2850 16 1.45 .95 28 2.06 1.34 38 2.85 1.64 46 3.6 1.85 75 3.63 2.86 42 30 20" 26" 35" 8Q\„'
SU13 + 18 1.08 1.07 30 1.76 1.45 42 2.29 1.85 50 3.08 2.05 80 3.05 3.10 50 40 23" 30" 38" 9'
Air Cap 20 .77 1.2 32 1.44 1.56 46 1.72 2.07 60 1.76 2.58 85 2.48 3.35 80 60 23" 30" 38" 10Q\„'
73328 34 1.18 1.67 48 1.43 2.18 65 1.2 2.84 90 1.98 3.60
36 .94 1.78 50 1.2 2.28 70 .76 3.09 95 1.57 3.85
14 2.4 .89 22 3.2 1.13 34 3.4 1.63 40 4.4 1.77 60 5.0 2.53 20 10 4" 5" 7" 10'
Fluid Cap 16 2.1 1.05 26 2.8 1.38 38 2.9 1.86 44 3.8 1.99 65 4.4 2.73 34 20 5" 6" 8" 12'
2850 18 1.7 1.14 30 2.1 1.62 42 2.3 2.07 48 3.3 2.22 70 3.9 3.00 46 30 5" 7" 9" 13'
SUN13 + 20 1.4 1.26 34 1.5 1.87 46 1.8 2.36 54 2.6 2.55 75 3.4 3.25 54 40 6" 9" 11" 14'
Air Cap 24 .81 1.54 38 1.2 2.1 50 1.4 2.58 60 1.9 2.98 80 3.0 3.57 75 60 8" 10" 13" 16'
73335 28 .54 1.76 42 .72 2.38 60 .60 3.16 70 1.1 3.53 90 2.3 4.12
32 .30 1.96 48 .39 2.69 70 .33 3.65 85 .40 4.27 100 2.0 4.65
18 1.04 1.05 30 1.56 1.43 42 2.06 1.75 55 2.16 2.15 75 3.20 2.66 22 10 10" 13" 18" 6'
Fluid Cap 20 .80 1.15 34 1.10 1.61 44 1.80 1.85 60 1.60 2.38 80 2.66 2.90 38 20 14" 20" 27" 6Q\„'
2850 22 .62 1.25 36 .90 1.70 46 1.57 1.94 65 1.15 2.62 85 2.19 3.13 46 30 23" 29" 36" 6Q\„'
SU14 + 24 .47 1.35 38 .74 1.79 48 1.35 2.04 70 .76 2.85 90 1.75 3.36 60 40 24" 29" 37" 7'
Air Cap 26 .35 1.45 40 .60 1.88 50 1.13 2.13 80 60 25" 30" 38" 7Q\„'
73320 28 .25 1.55 42 .47 1.97 55 .70 2.36
44 .35 2.07
14 4.5 .80 24 7.5 1.24 34 9.5 1.74 44 11.1 2.2 56 19.8 2.56 16 10 4" 5" 6" 8'
Fluid Cap 16 2.9 .97 26 6.0 1.44 36 7.8 1.96 46 9.7 2.46 60 16.7 2.97 30 20 4" 5" 7" 10'
60100 18 2.0 1.17 28 4.5 1.68 38 6.5 2.2 48 8.4 2.69 65 13.5 3.5 40 30 5" 7" 9" 11'
SUN23 + 20 .84 1.42 30 3.4 1.82 40 5.2 2.53 52 5.7 3.3 70 9.7 4.33 52 40 6" 8" 11" 12'
Air Cap 32 2.4 2.06 42 4.1 2.65 56 3.9 3.84 80 4.8 5.73 70 60 8" 10" 14" 13'
125340 34 1.3 2.32 46 2.6 3.25 60 2.4 4.36 90 1.8 7.4
36 .80 2.61 50 1.1 3.72 65 1.1 5.04 95 .70 8.38
16 2.95 1.92 28 4.45 2.66 38 5.94 3.22 46 7.50 3.66 65 9.70 4.80 20 10 6" 7" 8" 10'
Fluid Cap 18 2.25 2.10 30 3.87 2.84 40 5.40 3.40 50 6.45 3.97 70 8.60 5.20 32 20 9" 11" 13" 10Q\„'
40100 20 1.72 2.30 32 3.30 3.04 42 4.86 3.55 52 5.90 4.15 75 7.50 5.60 42 30 10" 13" 18" 11'
SU23B + 22 1.32 2.50 34 2.78 3.22 44 4.32 3.74 54 5.40 4.32 80 6.40 6.00 54 40 12" 15" 18" 11Q\„'
Air Cap 24 1.00 2.70 36 2.28 3.40 46 3.78 3.93 56 4.87 4.50 85 5.30 6.48 75 60 13" 16" 19" 13'
125328 48 3.25 4.12 58 4.34 4.70 90 4.25 6.96
60 3.84 4.90
12 7.0 1.15 22 11.5 1.65 34 12.4 2.20 46 13.7 2.75 65 18.3 3.56 16 10 7" 9" 12" 11'
Fluid Cap 14 5.4 1.35 26 8.3 2.02 38 9.8 2.57 50 10.9 3.14 75 12.6 4.47 32 20 9" 12" 16" 11Q\„'
60100 16 4.2 1.57 30 6.0 2.40 42 7.8 2.95 54 8.7 3.51 80 10.6 4.95 46 30 10" 13" 17" 12'
SU23 + 18 3.3 1.69 32 5.1 2.60 46 5.9 3.34 56 7.8 3.70 85 8.7 5.40 56 40 12" 15" 19" 12Q\„'
Air Cap 20 2.7 1.97 34 4.3 2.78 48 5.0 3.52 60 6.4 4.06 90 6.9 5.85 85 60 13" 16" 20" 14Q\„'
125328 22 2.0 2.20 36 3.6 2.97 50 4.3 3.71 65 4.6 4.53 95 5.5 6.30
38 3.0 3.16 52 3.7 3.90 70 3.3 5.00 100 4.5 6.76
14 7.7 3.17 26 10.5 4.55 34 20.8 4.75 42 29.4 5.15 58 44.7 6.05 14 10 7" 8" 10" 11'
Fluid Cap 16 5.0 3.83 28 7.0 5.15 36 16.6 5.25 44 25.1 5.6 60 41.0 6.42 26 20 10" 12" 17" 12Q\„'
100150 38 12.8 5.8 46 20.8 6.05 65 31.4 7.45 38 30 10" 12" 18" 14'
SU43 + 40 9.5 6.35 48 16.7 6.6 70 22.5 8.75 48 40 13" 16" 21" 15'
Air Cap 42 6.7 6.85 50 13.1 7.15 75 15.0 10.1 70 60 14" 17" 23" 17'
189351 52 10.0 7.75 80 8.7 11.45
54 7.3 8.3
1/8J & 1/4J
Air Atomizing
SIPHON/GRAVITY-FED SPRAY SET-UPS D
9
Fluid Cap
DESIGN FEATURES AIR
Air Cap
For the Round and Flat Sprays, AIR
AIR ATOMIZING
out distance “B”. Beyond “B”, the ROUND SIPHON
HEIGHT
spray becomes turbulent and will SPRAY PATTERN
project out to distance “D”.
3612
When using a Siphon or Gravity- Gasket
Fed Liquid System, the liquid is
supplied by either a liquid siphon 1158 Retainer Ring
or gravity feed. These Set-ups
are designed to draw liquid
through the feed line into the air ROUND SPRAY AND FLAT Note: The No. 1158 Retainer Ring and
flow where it is atomized. SPRAY AIR CAPS 3612 Gasket must be ordered
Air Caps used in these Spray Set-ups separately from the Spray Set-up,
produce round spray and flat spray but are included in the standard
patterns. nozzle assembly. SEE PAGE D3
FOR ORDERING INFORMATION.
ROUND SPRAY
Spray Set-up ATOMIZING AIR SPRAY DIMENSIONS
LIQUID CAPACITY in gph (gallons per hour)
Spray Consists of At 8" Siphon Height
Set-up Fluid and Air Air Gravity Head Siphon Height Spray
No. Air Cap Air Angle B D
Press. Capacity psi inches feet
Combination psi scfm 18" 12" 6" 4" 8" 12" 24" 36" A
degrees
10 .40 .39 .35 .30 .23 .18 .14 10 18° 11" 6'
Fluid Cap 1650 .46 .43 .39 .34 .31 .28 .14 20 18°
20 .59 11" 6Q\„'
SU1A + 40 .95 .54 .50 .47 .41 .38 .36 .28 .19 40 18° 12" 7Q\„'
Air Cap 64 60 1.32 .59 .54 .49 .44 .41 .39 .31 .24 60 18° 14" 8Q\„'
Fluid Cap 2050 10 .47 .63 .55 .46 .40 .32 .21 10 18° 12" 7'
+ 20 .66 .73 .66 .60 .54 .48 .40 .21 .07 20 18° 13" 7Q\„'
SU1 40 1.06 .87 .81 .76 .71 .67 .61 .43 .28 40 18° 15" 8Q\„'
Air Cap 64 .98 .92 .88 .83 .79 .73 .57 .40 60 19°
60 1.48 17" 10'
Fluid Cap 2050 10 .81 .67 .61 .53 .43 .37 .29 10 18° 12" 8'
+ 20 1.20 .76 .72 .64 .56 .50 .44 .21 20 18° 13" 9'
SU2A 40 1.94 .89 .86 .82 .76 .71 .65 .46 .30 40 19° 15" 11'
Air Cap 70 .98 .96 .94 .91 .87 .81 .68 .56 60 20°
60 2.70 17" 13'
Fluid Cap 2850 10 .68 1.19 1.05 .91 .56 .47 .38 10 21° 15" 10'
+ 20 1.03 1.37 1.27 1.13 .88 .77 .68 .46 20 21° 16" 11'
SU2 40 1.70 1.57 1.47 1.32 1.15 1.05 .91 .63 .28 40 21° 18" 13'
Air Cap 70 1.48 1.41 1.30 1.08 1.02 .90 .74 60 22°
60 2.39 .52 20" 15'
Fluid Cap 60100 20 1.90 5.80 5.15 4.20 3.10 2.65 1.90 .60 20 17° 18" 12'
+ 40 3.00 6.50 5.95 5.10 4.30 3.70 3.00 1.55 .70 40 18° 20" 14'
SU4 60 4.10 6.80 6.35 5.60 4.90 4.20 3.45 2.20 1.30 60 18° 21" 16'
Air Cap 120 6.80 6.40 5.80 5.20 4.50 3.85 2.60 1.60 80 19°
80 5.20 23" 18'
Fluid Cap 100150 30 5.3 7.2 6.0 4.6 30 20° 20" 22'
+ 40 6.5 7.8 6.8 5.3 40 20° 21" 23'
SU5 60 8.8 11.4 10.6 8.3 7.4 6.2 3.2 60 21° 23" 25'
Air Cap 180 11.6 11.0 10.3 8.3 7.5 6.4 4.4 2.2 80 22°
80 11.1 25" 27'
FLAT SPRAY
Spray Set-up ATOMIZING AIR SPRAY DIMENSIONS
LIQUID CAPACITY in gph (gallons per hour)
Spray Consists of At 8" Siphon Height
Set-up Fluid and Air Air Gravity Head Siphon Height
No. Air Cap Air A B C D
Press. Capacity in.
Combination 18" 12" 6" 4" 8" 12" 24" 36" psi in. in. feet
psi scfm
Fluid Cap 2850 10 .99 .35 .33 .30 .27 .25 .22 .17 .13 10 8" 10Q\„" 15" 7'
SUF1 + 20 1.42 .31 .30 .29 .26 .25 .23 .19 .16 20 8Q\„" 11Q\„" 15" 7'
Air Cap 73420 30 1.83 .18 .16 .15 .11 .09 30 9" 12" 15" 6'
Fluid Cap 35100 20 1.86 1.01 .95 .90 .77 .72 .67 .62 .56 20 9" 12Q\„" 15" 9'
+ 30 2.42 .88 .84 .81 .75 .71 .67 .63 .57 30 9Q\„" 13Q\„" 16Q\„" 9'
SUF2C 40 2.96 40
Air Cap 120432 .76 .73 .69 .65 .61 .58 .53 .48 10Q\„" 14Q\„" 18" 10'
60 4.05 .44 .41 .37 .33 .30 .27 60 11" 15Q\„" 19" 9'
Fluid Cap 40100 20 2.26 1.35 1.28 1.20 1.01 .96 .92 .78 .62 20 7Q\„" 9" 10Q\„" 11'
+ 30 2.88 1.26 1.21 1.14 .92 .87 .82 .74 .59 30 8" 10" 11" 11'
SUF3B 40 3.52 40
Air Cap 122435 .98 .92 .87 .66 .59 .52 .44 8Q\„" 10Q\„" 12" 10'
50 4.13 .58 .52 .44
Fluid Cap 40100 20 2.10 2.01 1.90 1.71 1.47 1.40 1.32 1.17 .92 20 6Q\„" 8Q\„" 10Q\„" 11'
+ 30 2.70 2.00 1.94 1.81 1.58 1.52 1.45 1.34 1.11 30 7" 9" 11Q\„" 11'
SUF4B 40 3.28 1.82 1.74 1.63 1.42 1.34 1.22 1.03 40 8" 10Q\„" 13" 11'
Air Cap 122440 50 3.87 1.10 .97 .85 .69
1/8J & 1/4J
Air Atomizing
D PRESSURE SPRAY SET-UPS
10 (EXTERNAL MIX)
D
11
AIR ATOMIZING
Set-up Fluid and 3 psi 5 psi 10 psi 20 psi 40 psi
No. Air Cap Air Air Air Air Air Air Liquid A B C D
Combination Press. scfm gph Press. scfm gph Press. scfm gph Press. scfm gph Press. scfm gph
psi psi psi psi psi psi psi in. in. in. feet
10 3.0 15 3.6 20 4.1 35 6.3 45 7.5 10 3 5" 7Q\„" 10" 5Q\„'
Fluid Cap 15 3.6 20 4.1 25 4.9 40 6.9 50 8.2 25 3 5" 7Q\„" 10" 9'
35100 20 4.1 25 4.9 30 5.5 50 8.0 55 9.0 30 5 6" 7Q\„" 11" 10'
SUE25B + 25 4.9 3.6 30 5.5 4.7 35 6.3 6.6 60 9.4 9.4 60 9.7 13.2 35 10 6" 8Q\„" 11" 11Q\„'
Air Cap 30 5.5 40 6.9 40 6.9 70 11.0 70 11.1 35 20 6Q\„" 9" 14" 12'
134255-45° 40 6.9 50 8.0 50 8.0 80 12.7 80 12.7 60 20 6Q\„" 9" 14Q\„" 14'
50 8.0 60 9.4 60 9.4 90 14.5 90 14.5 70 40 6Q\„" 8Q\„" 12Q\„" 16'
20 5 13" 15" 19" 12Q\„'
Fluid Cap 8 3.2 10 3.6 20 5.5 30 7.4 45 10.0 30 10 13" 16" 22" 14'
35100 10 3.6 15 4.6 30 7.4 40 9.1 60 12.6 30 20 14" 18" 23" 13'
SUE28B + 3.6 4.7 6.6 9.4 13.2 45 20 15" 19" 26" 15'
Air Cap 15 4.6 25 6.5 35 8.3 50 10.9 75 15.2 60 20 15" 19" 25" 17'
122281-60° 20 5.5 30 7.4 40 9.1 60 12.6 80 16.0 55 30 16" 20" 27" 15'
60 40 15" 20" 28" 16'
10 3.0 20 4.1 25 4.9 40 6.9 50 8.2 10 3 6" 7Q\„" 10Q\„" 7'
Fluid Cap 15 3.6 25 4.9 30 5.5 45 7.5 60 9.7 25 3 6" 7Q\„" 10Q\„" 10'
40100 20 4.1 30 5.5 35 6.3 50 8.0 70 11.1 35 5 6" 8Q\„" 13" 11'
SUE25A + 25 4.9 4.8 35 6.3 6.1 40 6.9 8.7 60 9.4 12.3 75 12.0 17.4 40 10 6" 8Q\„" 14" 12Q\„'
Air Cap 30 5.5 40 6.9 50 8.0 70 11.0 80 12.7 40 20 6Q\„" 10" 14Q\„" 13'
134255-45° 40 6.9 50 8.0 60 9.4 80 12.7 90 14.5 60 20 6Q\„" 10" 14Q\„" 16'
50 8.0 60 9.4 70 11.0 90 14.5 95 15.1 75 40 7" 9" 14" 19'
15 3 13" 15" 20" 11Q\„'
Fluid Cap 8 3.2 10 3.6 15 4.6 35 8.3 50 10.9 25 10 14" 19" 25" 10'
40100 15 4.6 20 5.5 25 6.5 45 10.0 65 13.5 35 20 15" 18" 25" 12Q\„'
SUE28A + 4.8 6.1 8.7 12.3 17.4 45 20 13" 17" 24" 14'
Air Cap 20 5.5 25 6.5 35 8.3 55 11.7 85 16.8 60 20 12" 17" 23" 16'
122281-60° 25 6.5 30 7.4 40 9.1 60 12.6 95 18.5 60 30 13" 17" 24" 17'
70 40 13" 17" 24" 13'
30 5 16" 22" 30" 12'
Fluid Cap 10 3.6 15 4.6 25 6.5 45 10.0 75 15.2 40 10 18" 23" 32" 13'
60100 15 4.6 20 5.5 30 7.4 50 10.9 85 16.8 45 20 19" 23" 31" 14'
SUE28 + 9.9 12.7 18.0 25.5 36.0 65 20 17" 21" 30" 16'
Air Cap 20 5.5 30 7.4 40 9.1 70 14.3 95 18.5 80 20 15" 20" 26" 19'
122281-60° 25 6.5 35 8.3 45 10.0 80 16.0 100 19.4 55 30 19" 25" 33" 14'
90 40 16" 22" 31" 19'
15 3.6 25 4.9 35 6.3 45 7.5 55 9.0 15 3 6" 8" 10" 9'
Fluid Cap 20 4.1 30 5.5 40 6.9 50 8.0 60 9.7 30 3 6" 8Q\„" 11Q\„" 10'
60100 25 4.9 35 6.3 45 7.5 55 8.7 65 10.5 40 5 7" 9Q\„" 14" 11Q\„'
SUE25 + 30 5.5 9.9 40 6.9 12.7 50 8.0 18.0 60 9.4 25.5 70 11.1 36.0 45 20 8" 11" 15Q\„" 12'
Air Cap 35 6.3 45 7.5 60 9.4 70 11.0 80 12.7 50 10 7Q\„" 10Q\„" 15" 13'
134255-45° 40 6.9 50 8.0 70 11.0 80 12.7 90 14.5 60 20 8" 11" 15Q\„" 14'
50 8.0 60 9.4 80 12.7 90 14.5 100 16.0 80 40 7" 9Q\„" 15" 19Q\„'
25 8.3 25 8.3 35 10.5 55 14.5 25 3 6" 8" 11Q\„" 10'
Fluid Cap 30 9.2 30 9.2 40 11.6 60 15.7 40 3 6" 8" 12" 11'
60150 35 10.5 35 10.5 45 12.5 65 17.0 40 5 6" 8" 12" 13'
SUE45B + 40 11.6 10.0 40 11.6 12.9 50 13.4 18.0 70 18.4 25.5 50 10 6Q\„" 8Q\„" 12Q\„" 14'
Air Cap 45 12.5 45 12.5 55 14.5 75 20.0 55 20 6Q\„" 8Q\„" 13Q\„" 15'
200278-45° 50 13.4 50 13.4 60 15.7 80 21.2 60 15 6Q\„" 9" 13" 15Q\„'
60 15.7 60 15.7 70 18.4 90 24.2 70 20 6Q\„" 9" 13Q\„" 18'
30 9.2 40 11.6 55 14.5 70 18.4 30 3 6Q\„" 9Q\„" 13Q\„" 11Q\„'
Fluid Cap 35 10.5 45 12.5 60 15.7 75 20.0 45 3 7" 9Q\„" 14" 14'
80150 40 11.6 50 13.4 65 17.0 80 21.2 55 5 7" 10" 14" 16'
SUE45A + 45 12.5 17.4 55 14.5 22.5 70 18.4 31.5 85 22.5 44.7 70 10 7" 10" 14" 18'
Air Cap 50 13.4 60 15.7 75 20.0 90 24.2 70 20 8" 10" 15" 18'
200278-45° 60 15.7 70 18.4 80 21.2 75 15 7" 10" 15" 19'
70 18.4 80 21.2 90 24.2 80 20 8" 10" 15" 20'
40 11.6 50 13.4 65 17.0 80 21.2 40 3 7Q\„" 10" 14" 15'
Fluid Cap 45 12.5 55 14.5 70 18.4 85 22.5 55 3 8" 10" 14Q\„" 16'
100150 50 13.4 60 15.7 75 20.0 90 24.2 65 5 8" 10" 14Q\„" 17'
SUE45 + 55 14.5 27.9 65 17.0 36.0 80 21.2 50.6 72.0 75 10 8Q\„" 10Q\„" 15" 18'
Air Cap 60 15.7 70 18.4 85 22.5 80 15 8Q\„" 10Q\„" 16" 18'
200278-45° 65 17.0 75 20.0 90 24.2 80 20 8Q\„" 10Q\„" 16" 19'
70 18.4 80 21.2 85 20 8Q\„" 10Q\„" 16" 20'
1/8JJ
Air Atomizing
D NOZZLES
12
SPRAY SET-UP
AIR ATOMIZING
= + + + +
MODEL 1/8JJ 1 2 3 4 5
SPRAY SET-UP
SHUT-OFF NEEDLE ASSEMBLY
NO. 14486
MODEL 1/8JJN
= + + + + +
1 2 3 4 6
1. RETAINER RING – NO. 12582
2. AIR CAP
3. FLUID CAP CLEAN-OUT NEEDLE ASSEMBLY
MODEL 1/8JJCO 4. O-RING – NO. 7717-2/007 NO. 14471
5. NOZZLE BODY – NO. 12891
6. NOZZLE BODY – NO. 14468
NOZZLE
GENERAL INFORMATION PAGE
SERIES
Air Atomizing
PRESSURE SPRAY SET-UPS D
13
DESIGN FEATURES
For the Round Spray pattern, 12582
Retainer Air Fluid 7717-2/007
angle “A” is maintained through- ROUND Ring Cap Cap O-ring
AIR ATOMIZING
out distance “B”. Beyond “B”, the SPRAY
spray becomes turbulent and will PATTERN
project out to distance “D”.
When using a Pressure-Fed
Liquid System, the liquid is
supplied to the nozzle under
pressure. The liquid and com-
ROUND SPRAY AIR CAPS
pressed air or gas are mixed Air Caps used in these Spray Set-ups
internally to produce a completely produce a full cone, round spray. Note: The No. 12582 Retainer Ring and
atomized spray. 7717-2/007 O-ring must be
ordered separately from the spray
360° CIRCULAR SPRAY AIR CAP set-up, but are included in the
Air Cap used in Spray Set-up SUJ340C standard nozzle assembly.
produces a 360° circular spray patterns.* SEE PAGE D3 FOR ORDERING
INFORMATION.
ROUND SPRAY
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute) SPRAY DIMENSIONS
Spray Set-up
LIQUID PRESSURE in psi (pounds per square inch)
Spray Consists of Spray
Set-up Fluid and 10 psi 20 psi 30 psi 40 psi 60 psi Air Liquid Angle B D
No. Air Cap Air Air Air Air Air psi psi A in. feet
Combination Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm deg.
psi psi psi psi psi
Fluid Cap 10 .66 .55 14 1.50 .40 24 1.68 .56 32 1.86 .68 50 2.28 .98 12 10 13° 12" 9
J2050 12 .48 .67 18 1.23 .50 28 1.44 .63 36 1.62 .80 54 2.05 1.07 24 20 13° 13" 10
SUJ11 + 14 .36 .78 22 .99 .63 32 1.08 .82 40 1.32 .93 58 1.80 1.19 36 30 13° 14" 11
Air Cap 26 .72 .76 38 .72 1.03 48 .85 1.23 66 1.32 1.52 44 40 14° 15Q\„" 12Q\„
J67147 30 .45 .93 42 .54 1.19 52 .66 1.38 70 1.11 1.66 62 60 15° 17Q\„" 14Q\„
Fluid Cap 10 .66 .66 18 1.44 .87 24 1.98 1.00 30 2.40 1.14 40 3.30 1.36 12 10 12° 17" 12
J2050 12 .54 .77 20 1.32 .98 28 1.68 1.17 34 2.16 1.29 46 2.94 1.54 20 20 13° 18" 13
SUJ12A + 14 .42 .90 22 1.20 1.06 32 1.44 1.35 38 1.92 1.47 52 2.58 1.83 34 30 13° 19" 14
Air Cap 26 .90 1.26 36 1.20 1.57 44 1.50 1.78 62 2.10 2.26 42 40 13° 20" 15
J73160 40 1.02 1.76 48 1.32 1.98 70 1.68 2.67 58 60 15° 22" 17
Fluid Cap 12 1.26 .73 22 2.16 1.05 30 2.90 1.24 36 4.32 1.26 48 5.82 1.50 22 10 12° 19" 13
J2850 16 1.08 .94 26 1.74 1.26 34 2.46 1.42 40 3.85 1.36 52 5.28 1.65 34 20 13° 20" 14
SUJ12 + 20 .90 1.15 30 1.44 1.47 38 2.10 1.65 44 3.55 1.56 56 4.92 1.73 42 30 13° 21" 15
Air Cap 24 .78 1.36 38 1.08 1.87 46 1.50 2.03 52 2.46 2.01 64 4.08 2.08 48 40 14° 22" 16
J73160 28 .76 1.56 42 .94 2.04 52 1.20 2.36 60 1.86 2.36 70 3.60 2.34 60 60 15° 23Q\„" 17Q\„
Fluid Cap 16 3.44 2.68 28 5.03 3.71 40 6.10 4.72 48 7.75 5.30 65 10.70 6.74 24 10 18° 26" 16
J40100 20 2.35 3.20 32 3.70 4.17 44 5.03 5.17 55 5.95 6.07 75 8.67 7.73 40 20 20° 30" 20
SUJ22B + 22 1.90 3.46 36 2.64 4.65 48 3.95 5.65 65 3.55 7.28 80 7.65 8.25 55 30 20° 32" 22
Air Cap 26 1.23 3.97 44 1.30 5.63 60 1.56 7.12 80 1.40 9.10 90 5.64 9.40 75 40 21° 36" 26
J1401110 30 .72 4.48 50 .76 6.36 70 .73 8.35 90 .72 10.34 100 3.62 10.60 85 60 21° 38" 30
Fluid Cap 12 8.1 2.00 20 13.6 2.55 30 16.3 3.25 38 19.5 3.74 54 25.7 4.66 14 10 17° 24" 16
J60100 14 6.6 2.32 22 12.0 2.85 34 13.1 3.75 42 16.5 4.20 60 21.8 5.34 26 20 18° 27" 19
SUJ22 + 16 4.9 2.66 24 10.2 3.15 38 9.9 4.32 46 13.6 4.71 65 18.5 5.98 40 30 20° 30" 22
Air Cap 28 7.2 3.75 42 7.6 4.90 52 9.6 5.58 75 12.2 7.80 50 40 20° 31" 23
J1401110 32 4.6 4.35 46 5.6 5.50 56 7.6 6.14 85 8.0 8.90 70 60 21° 36" 28
Air Atomizing
D PRESSURE SPRAY SET-UPS
14
DESIGN FEATURES
For the Wide-Angle Round and 12582
Retainer Air Fluid 7717-2/007
Flat Sprays, dimensions “A”, “B”, Ring Cap Cap O-ring
and “C” are the pattern widths at
AIR ATOMIZING
FLAT SPRAY
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)
Spray Set-up
LIQUID PRESSURE in psi (pounds per square inch) SPRAY DIMENSIONS
Spray Consists of
Set-up Fluid and 10 psi 20 psi 30 psi 40 psi 60 psi
No. Air Cap Air Air Air Air Air
Combination Air Liquid A B C D
Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm
psi psi psi psi psi psi psi in. in. in. feet
Fluid Cap 10 1.44 .84 18 2.17 1.12 28 2.49 1.47 38 2.77 1.84 55 3.41 2.43 16 10 10" 14" 18" 8Q\„'
J2050 12 1.25 .96 22 1.82 1.31 32 2.19 1.64 42 2.49 2.01 65 2.83 2.85 30 20 14" 19" 26" 10'
SUJ13A + 14 1.09 1.08 26 1.50 1.50 36 1.89 1.82 46 2.20 2.19 75 2.26 3.26 40 30 15" 21" 30" 10Q\„'
Air Cap 18 .79 1.32 34 .93 1.87 44 1.30 2.18 60 1.25 2.81 90 1.40 3.88 50 40 18Q\„" 24" 34" 11'
J73328 22 .53 1.55 40 .57 2.16 55 .65 2.68 70 .65 3.25 100 .88 4.29 85 60 22" 29" 37" 13'
Fluid Cap 12 2.17 .70 20 3.35 .96 30 3.98 1.27 38 4.66 1.49 65 4.8 2.38 16 10 14" 18" 28" 7'
J2850 14 1.80 .82 24 2.71 1.14 34 3.41 1.45 42 4.14 1.65 70 4.21 2.62 30 20 17" 24" 32" 8'
SUJ13 + 16 1.45 .95 28 2.06 1.34 38 2.85 1.64 46 3.6 1.85 75 3.63 2.86 42 30 20" 26" 35" 8Q\„'
Air Cap 20 .77 1.2 32 1.44 1.56 46 1.72 2.07 60 1.76 2.58 85 2.48 3.35 50 40 23" 30" 38" 9'
J73328 36 .94 1.78 50 1.2 2.28 70 .76 3.09 95 1.57 3.85 80 60 23" 30" 38" 10Q\„'
Fluid Cap 18 1.04 1.05 30 1.56 1.43 42 2.06 1.75 55 2.16 2.15 75 3.20 2.66 22 10 10" 13" 18" 6'
J2850 20 .80 1.15 34 1.10 1.61 44 1.80 1.85 60 1.60 2.38 80 2.66 2.90 38 20 14" 20" 27" 6Q\„'
SUJ14 + 22 .62 1.25 36 .90 1.70 46 1.57 1.94 65 1.15 2.62 85 2.19 3.13 46 30 23" 29" 36" 6Q\„'
Air Cap 26 .35 1.45 40 .60 1.88 50 1.13 2.13 60 40 24" 29" 37" 7'
J73320 44 .35 2.07 80 60 25" 30" 38" 7Q\„'
Fluid Cap 16 2.95 1.92 28 4.45 2.66 38 5.94 3.22 46 7.50 3.66 65 9.70 4.80 20 10 6" 7" 8" 10'
J40100 18 2.25 2.10 30 3.87 2.84 40 5.40 3.40 50 6.45 3.97 70 8.60 5.20 32 20 9" 11" 13" 10Q\„'
SUJ23B + 20 1.72 2.30 32 3.30 3.04 42 4.86 3.55 52 5.90 4.15 75 7.50 5.60 42 30 10" 13" 18" 11'
Air Cap 24 1.00 2.70 36 2.28 3.40 46 3.78 3.93 56 4.87 4.50 85 5.30 6.48 54 40 12" 15" 18" 11Q\„'
J125328 60 3.84 4.90 75 60 13" 16" 19" 13'
Fluid Cap 12 7.0 1.15 22 11.5 1.65 34 12.4 2.20 46 13.7 2.75 65 18.3 3.56 16 10 7" 9" 12" 11'
J60100 14 5.4 1.35 26 8.3 2.02 38 9.8 2.57 50 10.9 3.14 75 12.6 4.47 32 20 9" 12" 16" 11Q\„'
SUJ23 + 16 4.2 1.57 30 6.0 2.40 42 7.8 2.95 54 8.7 3.51 80 10.6 4.95 46 30 10" 13" 17" 12'
Air Cap 20 2.7 1.97 34 4.3 2.78 48 5.0 3.52 60 6.4 4.06 90 6.9 5.85 56 40 12" 15" 19" 12Q\„'
J125328 38 3.0 3.16 52 3.7 3.90 70 3.3 5.00 100 4.5 6.76 85 60 13" 16" 20" 14Q\„'
1/8JJ
Air Atomizing
SIPHON/GRAVITY-FED SPRAY SET-UPS D
15
DESIGN FEATURES AIR
AIR ATOMIZING
HEIGHT
spray becomes turbulent and will
project out to distance “D”.
When using a Siphon or Gravity-
Fed Liquid System, the liquid is
supplied by either a liquid siphon Note: The No. 12582 Retainer Ring
ROUND SPRAY AND
or gravity feed. These Set-ups FLAT SPRAY AIR CAPS and 7717-2/007 O-ring must be
are designed to draw liquid Air Caps used in these Spray Set-ups ordered separately from the
produce a full cone, round spray and flat Spray Set-up, but are included in
through the feed line into the air
spray patterns. the standard nozzle assembly.
flow where it is atomized. SEE PAGE D3 FOR ORDERING
INFORMATION.
ROUND SPRAY
Spray Set-up ATOMIZING AIR SPRAY DIMENSIONS
LIQUID CAPACITY in gph (gallons per hour)
Spray Consists of At 8" Siphon Height
Set-up Fluid and Air Air Gravity Head Siphon Height Spray
No. Air Cap Air Angle B D
Press. Capacity psi A inches feet
Combination psi scfm 18" 12" 6" 4" 8" 12" 24" 36" degrees
Fluid Cap J1650 10 .40 .39 .35 .30 .23 .18 .14 10 18° 11" 6'
20 .59 .46 .43 .39 .34 .31 .28 .14 20 18° 11" 6Q\„'
SUJ1A + 40 .95 .54 .50 .47 .41 .38 .36 .28 .19 40 18° 12" 7Q\„'
Air Cap J64 60 1.32 .59 .54 .49 .44 .41 .39 .31 .24 60 18° 14" 8Q\„'
Fluid Cap J2050 10 .47 .63 .55 .46 .40 .32 .21 10 18° 12" 7'
SUJ1 + 20 .66 .73 .66 .60 .54 .48 .40 .21 .07 20 18° 13" 7Q\„'
40 1.06 .87 .81 .76 .71 .67 .61 .43 .28 40 18° 15" 8Q\„'
Air Cap J64 60 1.48 .98 .92 .88 .83 .79 .73 .57 .40 60 19° 17" 10'
Fluid Cap J2050 10 .81 .67 .61 .53 .43 .37 .29 10 18° 12" 8'
SUJ2A + 20 1.20 .76 .72 .64 .56 .50 .44 .21 20 18° 13" 9'
40 1.94 .89 .86 .82 .76 .71 .65 .46 .30 40 19° 15" 11'
Air Cap J70 60 2.70 .98 .96 .94 .91 .87 .81 .68 .56 60 20° 17" 13'
Fluid Cap J2850 10 .68 1.19 1.05 .91 .56 .47 .38 10 21° 15" 10'
SUJ2 + 20 1.03 1.37 1.27 1.13 .88 .77 .68 .46 20 21° 16" 11'
40 1.70 1.57 1.47 1.32 1.15 1.05 .91 .63 .28 40 21° 18" 13'
Air Cap J70 60 2.39 1.48 1.41 1.30 1.08 1.02 .90 .74 .52 60 22° 20" 15'
Fluid Cap J2850 10 .41 .59 .49 .29 10 18° 12" 8'
SUJ3 + 20 .61 1.22 1.05 .89 .78 .63 .26 20 18° 13" 9'
40 .99 1.68 1.56 1.45 1.34 1.22 1.10 .70 .30 40 18° 15" 11'
Air Cap J64-5 60 1.36 1.91 1.81 1.72 1.64 1.54 1.44 1.02 .56 60 19° 17" 13'
Fluid Cap J40100 10 1.30 1.40 .97 .59 10 17° 18" 10'
SUJ4B + 20 1.97 2.57 2.37 1.90 1.50 1.20 .34 20 17° 19" 11'
40 3.12 3.20 2.96 2.80 2.30 2.02 1.70 .76 .26 40 18° 21" 13'
Air Cap J120 60 4.28 3.47 3.24 3.05 2.57 2.32 2.05 1.16 .52 60 19° 23" 15'
Fluid Cap J60100 20 1.90 5.80 5.15 4.20 3.10 2.65 1.90 .60 20 17° 18" 12'
SUJ4 + 40 3.00 6.50 5.95 5.10 4.30 3.70 3.00 1.55 .70 40 18° 20" 14'
60 4.10 6.80 6.35 5.60 4.90 4.20 3.45 2.20 1.30 60 18° 21" 16'
Air Cap J120 80 5.20 6.80 6.40 5.80 5.20 4.50 3.85 2.60 1.60 80 19° 23" 18'
For the Flat Spray pattern, dimen- distance of spray projection from
sions “A”, “B”, and “C” are the the nozzle to the maximum disper-
FLAT
pattern widths at distances from sal point is represented by “D”. SPRAY PATTERN
the nozzle as shown. The total a
6"
a
9"
15"
a
FLAT SPRAY
Spray Set-up ATOMIZING AIR SPRAY DIMENSIONS
LIQUID CAPACITY in gph (gallons per hour)
Spray Consists of At 8" Siphon Height
Set-up Fluid and Air Air Gravity Head Siphon Height
No. Air Cap Air A B C D
Press. Capacity in.
Combination 18" 12" 6" 4" 8" 12" 24" 36" psi in. in. feet
psi scfm
Fluid Cap J2850 10 .99 .35 .33 .30 .27 .25 .22 .17 .13 10 8" 10Q\„" 15" 7'
SUJF1 + 20 1.42 .31 .30 .29 .26 .25 .23 .19 .16 20 8Q\„" 11Q\„" 15" 7'
Air Cap J73420 30 1.83 .18 .16 .15 .11 .09 30 9" 12" 15" 6'
Fluid Cap J35100 20 1.86 1.01 .95 .90 .77 .72 .67 .62 .56 20 9" 12Q\„" 15" 9'
SUJF2C + 30 2.42 .88 .84 .81 .75 .71 .67 .63 .57 30 9Q\„" 13Q\„" 16Q\„" 9'
Air Cap J120432 40 2.96 .76 .73 .69 .65 .61 .58 .53 .48 40 10Q\„" 14Q\„" 18" 10'
60 4.05 .44 .41 .37 .33 .30 .27 60 11" 15Q\„" 19" 9'
Fluid Cap J40100 20 2.26 1.35 1.28 1.20 1.01 .96 .92 .78 .62 20 7Q\„" 9" 10Q\„" 11'
SUJF3B + 30 2.88 1.26 1.21 1.14 .92 .87 .82 .74 .59 30 8" 10" 11" 11'
Air Cap J122435 40 3.52 .98 .92 .87 .66 .59 .52 .44 40 8Q\„" 10Q\„" 12" 10'
50 4.13 .58 .52 .44
Fluid Cap J40100 20 2.10 2.01 1.90 1.71 1.47 1.40 1.32 1.17 .92 20 6Q\„" 8Q\„" 10Q\„" 11'
SUJF4B + 30 2.70 2.00 1.94 1.81 1.58 1.52 1.45 1.34 1.11 30 7" 9" 11Q\„" 11'
40 3.28 1.82 1.74 1.63 1.42 1.34 1.22 1.03 40 8" 10Q\„" 13" 11'
Air Cap J122440 50 3.87 1.10 .97 .85 .69
1/2J
Air Atomizing
D NOZZLES
16
AIR ATOMIZING
PLUG
NO. 1706
MODEL 1/2J SPRAY SET-UP
= + + + + +
NOZZLE
GENERAL INFORMATION PAGE
SERIES
Air Atomizing
PRESSURE SPRAY SET-UPS D
Fluid Cap
17
Air Cap
DESIGN FEATURES
For the Wide-Angle Round,
Round and Flat Sprays,
AIR ATOMIZING
dimensions “A”, “B”, and “C” 9" 8491 Gasket*
are the pattern widths at 18"
27"
distances from the nozzle as 1705 Retainer Ring
shown. The total distance of
spray projection from the nozzle PRESSURE SPRAY SET-UPS
Liquid is supplied to nozzle under WIDE-ANGLE ROUND
to the maximum dispersal point SPRAY AIR CAPS
is represented by “D”. pressure. Liquid and compressed
Air Caps used in these Spray Set-ups
air or gas are mixed internally to produce a hollow cone type, wide-angle
produce a finely atomized spray. round spray pattern.
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)
Spray Set-up
Spray Consists of LIQUID PRESSURE in psi (pounds per square inch) SPRAY DIMENSIONS
Spray 5 psi 15 psi 25 psi 35 psi 55 psi
Set-up Fluid and Pattern
No. Air Cap Air Air Air Air Air
Combination Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Press. gph scfm Air Liquid A B C D
psi psi psi psi psi psi psi in. in. in. feet
Fluid Cap 28 33.0 8.4 40 28.8 11.3 58 66.0 12.2 30 25 13Q\„" 19" 26Q\„" 22
250375 Wide 30 19.8 10.8 42 15.6 13.9 60 42.0 15.0 40 35 13Q\„" 19" 26Q\„" 24
SU77 + Angle 62 25.2 18.2 60 55 14" 19Q\„" 27" 28
Air Cap Round
422-6-73-70°
Fluid Cap 8 27.0 6.5 18 42.0 7.0 32 47.0 11.0 46 42.6 18.1 70 81.0 29.5 10 5 13" 18Q\„" 25Q\„" 20
250375 Wide 10 15.0 8.2 20 29.4 8.8 34 36.0 12.8 48 32.4 20.2 75 33.0 34.5 20 15 13Q\„" 19" 26Q\„" 26
SU78 + Angle 12 8.4 9.8 22 20.2 10.5 36 25.2 14.7 50 25.8 22.2 80 22.2 39.6 36 25 13" 18Q\„" 25Q\„" 21
Air Cap Round 24 14.4 12.2 38 18.6 16.6 52 19.8 24.0 50 35 13Q\„" 19" 26Q\„" 24
422-6-94-70° 40 13.8 18.6 54 15.6 25.8 75 55 14" 19" 27" 27
Fluid Cap 10 34.2 11.4 26 46.2 20.2 40 62.6 27.5 54 75.6 32.6 75 127 39.0 12 5 14" 19Q\„" 27" 26
250375 Wide 12 21.6 13.0 28 37.2 22.0 42 52.8 29.6 56 57.0 34.3 80 108 42.4 30 15 13Q\„" 19" 26Q\„" 24
SU79 + Angle 14 12.0 14.7 30 28.4 23.7 44 43.8 31.6 58 46.8 35.8 85 98.0 45.6 46 25 13" 18Q\„" 26" 23
Air Cap Round 32 21.6 25.3 46 33.6 33.6 60 39.0 37.3 60 35 14" 19Q\„" 27" 28
469-6-125-70° 34 16.2 27.0 48 25.2 35.6 62 33.0 38.8 80 55 14" 19Q\„" 28" 30
50 18.0 37.5 65 25.8 41.2
10 35.4 11.1 18 103 15.4 26 155 17.7 36 180 23.0 54 222 29.1 10 5 13" 25" 36" 11
12 26.4 13.4 20 81.6 17.6 28 135 20.0 38 162 25.4 56 198 31.2 20 15 13" 26" 36" 16
22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34.0 32 25 11" 22" 32" 20
Fluid Cap 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3 44 35 11" 21" 29" 22
251376 Wide 34 84 27.5 44 116 32.6 62 166 38.9 64 55 11" 22" 31" 25
SU89 + Angle 36 69.5 30.0 46 101 35.1 64 154 41.6
Air Cap Round 38 56.4 32.6 48 81.5 37.6 66 142 44.1
469-6-130-70° 40 45.7 35.3 50 75.6 40.2 68 130 46.6
52 62.4 42.7 70 119 49.3
72 108 51.6
74 97.4 54.2
76 87.5 57.1
Fluid Cap 18 9.0 12.4 28 31.7 14.9 38 58.0 17.3 48 80.0 19.3 20 5 22
250375 20 6.7 13.7 32 22.5 17.0 44 37.7 20.8 54 55.2 23.6 36 15 3Q\„" 6Q\„" 10" 24
SU72 + Round 22 5.4 14.7 36 15.9 19.3 50 24.7 24.8 60 40.0 27.5 50 25 27
24 4.1 15.7 38 13.2 20.4 54 19.5 27.5 66 30.0 32.1 60 35 30
Air Cap
40 11.1 21.5 58 16.0 30.2 72 23.3 37.0
4221250 42 9.2 22.6 60 14.5 31.8 78 18.3 42.2
10 35.4 11.1 18 103 15.4 26 155 17.7 36 180 23.0 54 222 29.1 10 5 4" 7" 9" 23
12 26.4 13.4 20 81.6 17.6 28 135 20.0 38 162 25.4 56 198 31.2 20 15 6" 10" 13" 21
22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34.0 32 25 5" 8" 10" 37
Fluid Cap 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3 44 35 4" 7" 10" 41
251376 34 84 27.5 44 116 32.6 62 166 38.9 64 55 4" 7" 10" 47
SU82 + Round 36 69.5 30.0 46 101 35.1 64 154 41.6
Air Cap 38 56.4 32.6 48 81.5 37.6 66 142 44.1
4691312 40 45.7 35.3 50 75.6 40.2 68 130 46.6
52 62.4 42.7 70 119 49.3
72 108 51.6
74 97.4 54.2
76 87.5 57.1
Fluid Cap 28 39 22.4 44 44.1 31.5 58 53.0 40.0 20 10 17" 28" 35" 18
250375 30 31.8 24.0 46 37.2 33.5 60 45.6 42.0 30 15 18" 29" 36" 19
SU75 + Flat 32 24.6 25.9 48 31.2 35.1 63 38.0 44.0 40 20 19" 30" 37" 21
Air Cap 34 19.8 27.5 50 27.0 36.9 65 31.0 47.0 50 25 20" 31" 38" 23
36 15.0 29.1 52 20.6 38.7 70 21.0 52.5 60 35 24" 36" 43" 27
4533102 70 40 26" 39" 46" 29
10 35.4 11.1 18 103 15.4 26 155 17.7 36 180 23.0 54 222 29.1 10 5 20" 34" 47" 13
12 26.4 13.4 20 81.6 17.6 28 135 20.0 38 162 25.4 56 198 31.2 20 15 34" 62" 83" 15
22 63.6 19.8 30 115 22.5 40 147 27.8 58 186 34.0 32 25 34" 62" 82" 17
Fluid Cap 24 49.3 22.6 32 100 25.1 42 131 30.2 60 180 36.3 44 35 36" 66" 85" 19
251376 34 84 27.5 44 116 32.6 62 166 38.9 64 55 36" 67" 89" 21
SU85 + Flat 36 69.5 30.0 46 101 35.1 64 154 41.6
Air Cap 38 56.4 32.6 48 81.5 37.6 66 142 44.1
40 45.7 35.3 50 75.6 40.2 68 130 46.6
4693102
52 62.4 42.7 70 119 49.3
72 108 51.6
74 97.4 54.2
76 87.5 57.1
1/2J
Air Atomizing
D SPRAY SET-UPS
18
Fluid Cap
DESIGN FEATURES Air Cap
For the Flat and Round Sprays,
dimensions “A”, “B”, and “C” are
AIR ATOMIZING
AIR
HEAD
SIPHON
HEIGHT
Air Atomizing
NOZZLES D
19
AIR ATOMIZING
SPRAY SET-UP
PLUG
NO. 5714
MODEL 1J
= + + + +
1 2 3 4
SHUT-OFF
NEEDLE ASSEMBLY
MODEL 1JN 1. RETAINER RING – NO. 12814
NO. 5713 FOR STANDARD SET-UP, AND
NO. 12415 FOR EXTERNAL MIX SET-UP
2. AIR CAP
3. FLUID CAP
4. NOZZLE BODY – NO. 5710
NOZZLE
GENERAL INFORMATION PAGE
SERIES
Air Atomizing
D PRESSURE SPRAY SET-UPS
20
ALL PATTERNS
DESIGN FEATURES
Fluid Cap
For the Wide-Angle Round, Air Cap
Round and Flat Sprays,
AIR ATOMIZING
Air Atomizing
SPRAY SET-UPS D
21
Fluid Cap
DESIGN FEATURES Air Cap
AIR ATOMIZING
FLAT
widths at distances from the SPRAY PATTERN
nozzle as shown. The total dis-
tance of spray projection from the 12"
nozzle to the maximum dispersal 30"
48" 12415
point is represented by “D”. Retainer Ring
FLAT SPRAY AND ROUND Note: The No. 12415 Retainer Ring must
SPRAY AIR CAPS be ordered separately from the
External Mix Air Caps used in these Spray Set-up, but is included in
Spray Set-ups produce a flat spray the standard nozzle assembly.
pattern and Siphon Air Caps produce a SEE PAGE D3 FOR ORDERING
round spray patterns. INFORMATION.
The JAU Series Automatic Air All nozzle parts are manufactured MODELS 1/4JAU and 10880- The 6218-1/4JAU features a
Atomizing Nozzle features an to precision, quality-controlled 1/4JAU feature !\›) NPT or BSPT single air line used both for spray
internal air cylinder for controlled standards for smooth operation (F) air and liquid inlets and !\°) atomization and for operation of
‘on-off’ operation up to 180 cycles and long service life. Nozzles NPT or BSPT (F) air cylinder the air cylinder. The single air
per minute. The ‘on-off’ cycle are made in a choice of nickel- inlets. Write for Data Sheet 4547. line is regulated at the desired
interrupts only the liquid portion plated brass or stainless steel, or ‘on-off’ cycle time causing
The MODEL 1/4JAU is used with
of the spray. (Liquid flow to the can be made in special materials simultaneous flow of atomizing
smaller capacity fluid caps, while
nozzle may be by siphon or to your order. All nozzles feature air and liquid. The nozzle
model 10880-1/4JAU is specified
gravity feed, or by pressure feed.) a hard drawn stainless steel operates up to 180 cycles per
for use with Spray Set-ups con-
needle, stainless steel fluid cap, minute and requires a minimum
taining fluid cap 80150 or 100150.
and stainless steel return spring. air pressure of 30 psi (2 bar).
Write for Data Sheet 10880.
Write for Data Sheet 6218.
Liquid
B
COMMON APPLICATIONS D
E
A Liquid Strainer
F AIR
B Pressure Regulator,
LUBRICANT APPLICATION MOISTURIZING CORRUGATED Non-Relieving Type, with Gauge G
PAPER BOARD C 1⁄4JAU Air Atomizing Nozzle H
D Split-Eyelet Connector
AIR
E Solenoid Valve—3-Way
F Pressure Regulator with Gauge G
G Air Filter
H Solenoid Valve—2-Way
PLATE MOUNTED D
23
NOZZLE ASSEMBLIES
SHUT-OFF EXTENSION STANDARD ADJUSTABLE
AIR ATOMIZING
The MODEL 6083-1/4JAU The MODEL 17690-1/8JJAU The MODEL 1/4JAUPM Spray The Model 19330-1/4 JAUPM
features an auxiliary shut-off nozzle features an extension to Nozzle features the spray nozzle Adjustable Spray Nozzle has
assembly in addition to the same provide forward positioning of body held to a mounting plate, in the same features as the
operating features of the 6218- the Spray Set-up as well as addition to the same operating 1/4 JAUPM, but also features a
1/4JAU. The auxiliary shut-off the same operating features as features and choice of set-ups regulating screw for precise
assembly allows temporary the 1/8JJAU. Extensions are as the 1/4JAU Spray Nozzle. adjustment of the spray atomiza-
liquid shut-off of individual supplied in 3", 6", 9", or 12" (8 The nozzle body is attached to tion. The included hex lock nut
nozzles in a system. Write for cm, 15 cm, 23 cm, or 30 cm) the mounting plate by a single holds the spray atomization
Data Sheet 6083. lengths with the needle shut-off nut for easy removal or replace- regulating screw firmly in place.
at the fluid cap. Write for Data ment. The rear of the mounting The adjustable model of the 1/4
Sheet 17740 plate contains all inlets, permit- JAUPM offers the same choice
ting fast, easy servicing of the of Set-ups as the 1/4JAU Spray
nozzle without disturbing air and Nozzle. The nozzle body is
liquid line connections. Write for attached to the mounting plate
Data Sheet 4776. by a single nut for easy removal
and replacement. The rear of the
The MODEL 1/4JAUPMCO
mounting plate contains all inlets
Spray Nozzle combines the
permitting fast, easy servicing of
features of both the nozzle body
the nozzle without disturbing air
held in a mounting plate and a
and liquid line connections. Write
clean-out needle extension.
for Data Sheet 19330.
The MODEL 6218-1/4JAUPM
The MODEL 7310-1/4JAU Spray The MODEL 6123-1/4JAU Spray features a single air line used
Nozzle features a knurled head Nozzle features an extension to both for spray atomization and
screw control in addition to the provide forward positioning of for operation of the air cylinder
operating features of the 1/4JAU. the nozzle spray set-up as well and in addition, has the nozzle
The screw control permits as the same operating features body held in a mounting plate by
manual nozzle shut-off without as the 1/4JAU. Extensions are a single nut. All inlets are at the
disturbing the operation of other supplied in either 6" (15 cm) or rear of the mounting plate,
nozzles on a manifold. Write for 12" (30 cm) lengths. The nozzle providing quick and easy service
Data Sheet 7310. diameter at the end of the of the nozzle without disturbing
extension is less than 1" (2.5 cm). air and liquid line connections.
The MODEL 1/4JAUCO features
Write for Data Sheet 6123. Write for Data Sheet 18586.
a 5359 clean-out needle extension
in addition to the same overall
design and operating features as
the 1/4JAU Spray Nozzle. The
fluid orifice is cleaned out by the
needle extension with each ‘on-
off’ cycle of the nozzle.
ORDERING INFORMATION
Automatic Air Actuated Nozzle
Assemblies:
Please telephone or write for ordering
assistance.
pg. D27
pg. B3
pg.D22
COMPONENTS TO SIMPLIFY NOZZLE INSTALLATION
Air Atomizing
D VARIABLE SPRAY
24
AUTOMATIC NOZZLES
VAU COMMON APPLICATIONS
independent control of ⓦ Coating
flow rate and spray pattern
AIR ATOMIZING
ⓦ Moisturizing
ⓦ Recirculating systems
Fan Air
Atomized
Liquid
Fan Air
DESIGN FEATURES
The VAU variable spray AutoJet Its intricate design makes the liquids. A built-in orifice clean-out reset in seconds. Thus, settings
nozzle provides independent nozzle ideal for spraying viscous needle can be actuated to virtu- can be changed to suit one
control of liquid, atomizing air, liquids as well. ally eliminate nozzle plugging. spray application and set back to
and fan air pressures for fine previously determined settings
An independent air atomizing The VAU nozzle can utilize any
tuning of flow rate, drop size, for a different application.
line can be adjusted to vary of seven different spray set-ups
spray distribution and coverage. spray drop size without affecting that provide flow rates ranging Automatic “on/off ” operation up
The VAU nozzle was designed liquid flow rates. An additional from 0.74 gph (2.8 l/h) to 47 gph to 180 cycles per minute.
for moisturizing and coating inlet/outlet port allows for liquid (179 l/h). Minimum of 35 psi (2.4 bar) air
processes that require precise recirculation which effectively pressure for operation of air
Atomizing air, fan air, and liquid
spray distribution and coverage. maintains the flow of viscous cylinder.
flow rate settings can be set and
PERFORMANCE DATA
Liquid capacity (gph)
Spray Set-up No. Data Sheet Number Flat Spray
3 psi 20 psi
Pattern
SUV67B-SS .74 1.9 37459M-V67B
SUV67A-SS 1.1 2.9 37459M-V67A 6"
Note: The data for Set-up SUV128-SS is typical of the performance information that is provided for each of the available Spray Set-ups.
Atom. Water Spray coverage (inches) @ indicated distance from nozzle… @ fan air pressure (psi)
1/8VAU-SS air
nozzle press. 0 psi* 5 psi 10 psi 20 psi 40 psi
press. (psi)
with (psi) A B C A B C A B C A B C A B C
Spray
3 3 4 5 4.5 6 8 7 10 13 12 16 20 - - - ORDERING INFORMATION
10 10 - - - - - - - - - 11 15 22 21 26 33
set-up 20 - - - - - - - - - - - - 17 22 30 Specify Nozzle no. plus the Spray Set-up no.
No. SUV128-SS
3 3 4 5 3 4 6 5 7 9 9 12 18 14 18 26
•
consisting
20 10 - - - 3 5 6 5 7 10 8 12 16 14 19 26
Example:
of
20 - - - - - - - - - - - - 13 19 25 1/8VAU-SS+SUV128-SS
VF60100-SS 3 3 4 5 3.5 4.5 6.5 4 6 8 6 8 11 12 14 21
fluid cap 30 10 2.5 3.5 5 3 4 5.5 4 6 8.5 7 9 15 12 16 22 Nozzle Spray
& 20 - - - - - - - - - - - - 11 15 21 No. Set-up
No.
VA1282125-60-SS 3 3 4 5.5 3 4.5 6 3.5 5 7 6 8 11 10 12 17
air cap 40 10 2.5 3.5 5 3.5 4.5 6 4 5 7 6 8 10.5 11 14 20
20 2.5 3.5 5 3 4 6.5 3 5 8 6 8 11 9 13 17
*At 0 bar fan air pressure, the spray forms a round spray pattern.
Air Atomizing
AUTOMATIC AIR ACTUATED D
25
NOZZLE ASSEMBLIES
10535-1/4J 10536-1/2J 10537-1J
⁄ " inlet
14 ⁄ " inlet
12 1" inlet
Write for Data Write for Data Write for Data
AIR ATOMIZING
Sheet 10535. Sheet 10536. Sheet 10537.
DESIGN FEATURES
The J series AutoJet Air nozzle withstand continuous use steel and are built to provide
Atomizing Nozzles mix air and at temperatures up to 400°F uniform distribution of the atom-
liquid supplied at line pressures (205°C) and the air cylinder ized spray with dependable drip-
up to 125 psi (9 bar) to produce packing is recommended for free cycling operation. (Any liquid
fine atomization. The self- temperatures up to 150°F (65°C). that flows may be sprayed with
contained air cylinder provides A wide range of capacities up to these nozzles. For very viscous
controlled on-off operation at any 29 gallons per minute (110 l/min), fluid, External Mix Flat Spray
desired frequency up to 180 and a choice of round, wide Set-Ups are recommended.)
ORDERING INFORMATION cycles per minute. This AutoJet angle round, and flat spray
Automatic Air Actuated Nozzle series features a spray nozzle patterns are available with either
Assemblies:
body assembly that is completely siphon or pressure Set-Ups.
Please telephone or write for ordering
assistance. separate from the air cylinder The J series AutoJet nozzle
assembly for minimal mainte- body assemblies are made in a
nance and fast, easy, cleaning of choice of nickel-plated brass or
the nozzle. The TEFLON corrosion-resistant stainless
packings and gaskets in the
PERFORMANCE DATA
Atomizing Air Available Spray Patterns and Capacities Dimensions Packing and Air Cylinder
and Liquid Inlet Capacity Range For Spray Set-up Fluid Cap Minimum Inlet Conn. Net
Nozzle No. in gph Overall Overall
Connections Type Patterns Capacities Gasket* Operating Female Weight
NPT or BSPT (F) (gallons per hour) Refer to:
Length Height Material Pressure NPT or BSPT
Round, Wide Angle P. D6-D11
10535-1/4J Q\‰" .13 GPH-72 GPH Round and Flat Sprays 6Q\‰" 3Q\‰" 18 ⁄" 1 lb.-8 oz.
External Mix Flat Spray P. D10, D11
TEFLON 30 psi
Round, Wide Angle 2 lbs.-14 oz.
10536-1/2J Q\„" 4 GPH-306 GPH Round and Flat Sprays P. D17, D18 7Q\„" 3Q\„" ⁄ "**
14
10537-1J 1) 24 GPH-1740 GPH Round Spray P. D20, D21 11Q\„" 5" 38 ⁄" 9 lbs.-10 oz.
*1J does not require fluid cap gasket. / **Also available with 1⁄8) NPT or BSPT connection.
COMMON APPLICATIONS
PRESSURE FED
from the float box by siphon
action, or with water being
AUTOMATIC
1/4JT delivered to the nozzle under SELF-CONTAINED AUTOMATIC
Write for Data Sheet 2843 pressure. 1/4JT has built-in A totally enclosed unit, except for The No. 6110 Humidifying Unit
strainers for air and water plus a humidistat, supplied completely includes all components
ball check valve in the water line. assembled ready for connection required for an installation
Suitable for use in systems to air, water and electric lines. except the pipe and wiring. The
where water is under pressure. Cabinet assembly includes spray spray nozzles are assembled to
Both systems finely atomize nozzles, air filter, air pressure the float tank. The other
spray for rapid evaporation and regulator with gauge, solenoid- components include air filter, air
efficient humidification. operated air valve, and water pressure regulator with gauge,
tank with float. Each nozzle is a solenoid-operated air valve and
special 1/4JHC Air Atomizing humidistat. The 1/4JH Air
PERFORMANCE DATA Nozzle designed for use with this Atomizing Nozzles supplied with
unit. Choice of either No. SU1A this Unit are offered with choice
LIQUID or No. SU2A Set-ups as of either No. SU1A or No. SU2A
Spray ATOMIZING AIR CAPACITY
Spray Set-up in l/h described in the table on this Spray Set-up. See the table on
Set- Consists of
SIPHON page. Nozzle orifices should be this page for capacities. Nozzle
up Fluid and Air Air HEIGHT
No. Air Cap Pressure Capacity a minimum of 12" (30 cm) below orifices should be a minimum of
Combination psi scfm 4" 8" 12" ceiling when installed. Each 12" (30 cm) below ceiling when
nozzle may be directed to left or installed. Each nozzle can be
Fluid Cap 20 .59 .34 .31 .28 right for spray projection as directed to right or left as desired.
1650 30 .76 .39 .37 .35
SU1A + 40 .95 .41 .38 .36 desired. Overall size of cabinet is Overall tank size including top
Air Cap 50 1.13 .42 .39 .37 14#\›" high x 13&\°" wide x 6" piping is 10" high x 12!\¤" wide
64 60 1.32 .44 .41 .39 deep (38 cm high x 35 cm wide x 5" deep (25 cm high x 32 cm
Fluid Cap 20 1.20 .56 .50 .44 x 15 cm deep). Net weight wide x 13 cm deep). Net weight
2050 30 1.57 .66 .61 .55
SU2A + 40 1.94 .76 .71 .65
including humidistat is 28 lbs. for all equipment is 17 lbs.
Air Cap 50 2.32 .84 .80 .74 (12.7 kg). For layout information (7.7 kg). For layout information
70 60 2.70 .91 .87 .81 write for Data Sheet 3404. write for Data Sheet 6110.
A B C D
I J
ITEM DESCRIPTION
A Float Box with Float Valve F Air Filter
B TW Liquid Strainer G Pressure Regulator with Gauge
C Air Atomizing Nozzle H Solenoid Valve
F G H
D Spray Pipe Assembly I Switching Relay
E Pipe Hangers J Humidistat
Air Atomizing
HUMIDIFICATION AND FLUID LINE ACCESSORIES D
27
AIR ATOMIZING
For use in any tank…to shut-off
inlet flow at a desired liquid level.
Made of brass. The 3161 Valve
Will respond to humidity levels Model 124 Liquid Strainers pro- Liquid Pressure Regulators are a
is 12!\¤" (32 cm) long, has !\¤"
in the range of 20% to 80% RH. tect nozzles from clogging and rugged diaphragm type design.
NPT or BSPT male inlet connec-
Maximum operating temperature wear. They feature a large They can be used with primary
tion. The 3266 is 12" (30 cm)
125°F (52°C). 24V DC; 110V or stainless steel screen with a supply line pressures up to
long and has a !\°" NPT or BSPT
240V AC. Overall Height 6" glass-reinforced nylon bowl for 400 psi (28 bar) and can regulate
female inlet connection. Write for
(15 cm). corrosion resistance and easy pressure between 5 and 125 psi
Data Sheets 3367 and 11149.
maintenance. They are available (0.3 and 8.5 bar). See Section G
in sizes ranging from #\›" to 2!\¤" for your specific needs.
and in a variety of materials. See
Section G.
Split-Eyelet Connectors provide Designed for use with UniJet The Model 22140 Pressure Tank Equipped with 3161 float valve
a fast and economical way of Split-Eyelet and threaded con- is a high quality tank meeting the with !\¤" NPT or BSPT male inlet
installing spray nozzles on a nector bodies, these swivel unions requirements of the ASME Boiler connection. Designed with three
manifold. They provide leak- simplify installation and removal and Pressure Vessel Code and !\¤" NPT or BSPT female outlets
proof connections up to 250 psi of air atomizing assemblies. meets OSHA safety regulations. for connection of feed, drain and
(17 bar) for liquid and gas lines. Write for Data Sheet 22520. It is constructed of lightweight overflow lines. Write for Data
The connector design reduces 304 stainless steel with brass Sheet 3119.
costs by eliminating cutting, fittings. The assembly includes a
threading and brazing operations. pressure regulator with gauge,
They are available in a choice ASME coded pressure relief
of sizes to fit !\¤" to 1" pipe and valve, air bleed valve, plug valves
equivalent size tubing. See for air inlet and liquid outlet, and
Sections B & G. an EPR rubber lid seal. The air
inlet and liquid outlet have !\›"
NPT (F) connections. The maxi-
mum working pressure is 140 psi
at 100°F (9.5 bar at 38°C). Tanks
are available in 1, 2, 5, and 10
gallon (3.8, 7.6, 18.9, and 37.8
liter capacities). Write for Data
pg. D22 Sheets 22140 and 36455.
Air Atomizing
D HUMIDIFICATION AND FLUID LINE ACCESSORIES
28
Has built-in transformer which Air Line Filters remove liquid and For proper spacing between air Siphon injectors provide an
supplies low-voltage current for solid contaminants from air lines and liquid lines. Sizes fit !\¤" pip- effective means of siphoning and
humidistat circuit. 2-wire 24V to protect against excessive wear ing. Hanger is held by threaded metering concentrated chemicals
control. 115V AC. Maximum and corrosion. Manual and rod and nuts (not included) for into water spray lines. Model
temperature 115°F (46°C). Automatic Drain Filter models vertical adjustment. Made of cast 23635 has #\°" female inlet and #\°"
are available with a 50 micron aluminum. 4" (10 cm) spacing… male outlet connections. Model
filter element. See Section G for use with 2335-SE Spray Pipe 23636 features #\°" male inlet and
your specific needs. Assembly. outlet connections constructed of
brass with stainless steel ball &
spring and VITON O-ring. Write
for Data Sheet 23635.
The Solenoid Valve series Air Pressure Regulators are Use on air, oil, gas or water.
features normally closed two-way available in either relieving or See Section G.
and three-way valves for “on-off” non-relieving designs. They can
flow in air and liquid lines. be used with primary supply line
pressures up to 300 psi (20 bar)
Two-Way, Two-Way High Flow,
and can regulate pressure
Three-Way Quick Exhaust, and
between 5 and 125 psi (0.3 and
Three-Way High Flow models
Consists of straight and formed 8.5 bar). See Section G for your
are available for a range of
tubing with fittings, globe valve specific needs.
operating requirements. See
and Split-eyelet Connectors. Not
Section G for your specific needs.
assembled. (1/4JH Nozzle to be
ordered separately.) Write for
Data Sheet 2335-SE.
Spray Guns
section E
INDEX
AutoJet® (Automatic Spray Guns)
Compact Style...................................................... E2
Air Operation Medium Pressure............................E3
Air Operation High Pressure................................ E4
Electric Operation High Pressure
and Low Pressure............................................ E5
GunJet® Introduction............................................... E6
Heavy Duty High Pressure.............................E7, E8
Heavy Duty Low Pressure............................ E8, E10
Medium Duty Low-Medium Pressure......... E10, E11
Light Duty Low Pressure............................E11, E12
GunJet Extensions.....................................E13, E14
Swivel Connectors..............................................E15
High Pressure Strainers..................................... E15
Inlet and Outlet Adapters....................................E16
AUTOMATIC SPRAY GUNS—AIR OPERATION
COMPACT STYLE
E
2 1/8JJAUH 1/4JAUH
Cycles/Min.: 180 180
Pressure: 125 psi (9 bar) 125 psi (9 bar)
Capacity: 0.3 gpm (1.1 l/min) 0.8 gpm (3 l/min)
SPRAY GUNS
DESIGN FEATURES
LIQUID INLET
The 1/8JJAUH is a miniaturized The 1/4JAUH is a compact air
⁄ ) NPT or BSPT
18
air actuated automatic spray gun. actuated automatic spray gun.
female RETURN STROKE
SPRING
SHUT-OFF NEEDLE stainless steel spring
hard drawn for instantaneous
It can be used with any UniJet It can be used with any UniJet
stainless steel shut-off. spray tip to provide precise spray tip to provide precise auto-
automated control of intermittent mated control of intermittent
spraying. spraying.
Available in a choice of nickel- Available in a choice of nickel-
plated brass or stainless steel. plated brass or stainless steel.
Both the air and liquid inlets are The liquid inlet connection is !\›"
!\°" NPT or BSPT (F). NPT or BSPT (F). The air
cylinder inlet connection is !\°"
A minimum of 30 psi (2 bar) air
NPT or BSPT (F).
pressure is required for operation.
AIR-OPERATED Write for Data Sheet 19690. A minimum of 30 psi (2 bar) air
CYLINDER
for instantaneous pressure is required for operation.
PLUG retraction of shut-off
needle to start Write for Data Sheet 6125.
spraying.
1/8JJAUH
COMMON APPLICATIONS
ⓦ Spray coating
ⓦ Moisturizing
ⓦ Die lubrication
ⓦ Chain lubrication
ⓦ Web spraying
MOISTENING
COATING BAKERY PRODUCTS PRINTED MATERIAL
ORDERING INFORMATION
COMPLETE COMPACT AUTOJET SPRAY GUN ASSEMBLY COMPLETE COMPACT AUTOJET SPRAY GUN ASSEMBLY
AUTOJET ONLY SPRAY TIP AUTOJET ONLY SPRAY TIP
SPRAY GUNS
DESIGN FEATURES
Model 22AUH AutoJets feature and full cone spray tips are
a !\¤" (12.7 mm) diameter mount- available. Write for Data Sheets
LOCKING ing hole and locking screw for 8605 and 18183.
SCREW quick installation and positioning
⁄ ) (12.7 mm)
Model 22AUH-SS AutoJets
12
on a mounting bar. They are
DIAMETER offer the same performance
INTERCHANGEABLE MOUNTING HOLE constructed of brass with nickel-
UNIJET TIP
characteristics as the 22AUH
plated external surfaces. The and are constructed with an inlet
valve seat and packing are made
STAINLESS STEEL STAINLESS STEEL body and cap assembly of
SPRING—closes valve of TEFLON and the valve stem
VALVE STEM stainless steel.
is made of stainless steel. A
variety of flat spray, hollow cone,
22AUH-SS-11024 22AUH-SS-14799
TEFLON
VALVE SEAT AIR CYLINDER Cycles/Min.: 180 180
opens valve
LIQUID INLET Pressure: 600 psi (40 bar) 800 psi (55 bar)
⁄ ) NPS or BSPP (M)
14
AIR INLET
TO AIR CYLINDER
Capacity: 5 gpm (19 l/min) 2 gpm (7.6 l/min)
22AUH 18 ⁄ ) NPT or BSPT, female
DESIGN FEATURES
Model 24AUA AutoJets feature Model 24AUA-20190 AutoJets
a !\¤" (12.7 mm) diameter mount- offer the same basic features as
ing hole and locking screw for the standard 24AUA with an
LOCKING SCREW
⁄ ) (12.7 mm)
12
quick installation and easy aluminum support body and end
DIAMETER
MOUNTING HOLE positioning on a mounting bar. cap which reduce the unit’s total
TUNGSTEN CARBIDE The shut-off needle and valve weight to just 1!\› lbs. (0.6 kg).
NEEDLE STEM STEEL SPRING—
TUNGSTEN CARBIDE
closes valve seat are available in tungsten Model 24AUA-20190 operates at
NEEDLE SEAT carbide or stainless steel. The liquid pressures up to 3000 psi
valve seat is located directly (210 bar) and requires a minimum
behind the spray tip for drip-free air pressure of 42 psi (3 bar) for
shut-off. A rear knob locks the the air cylinder. Write for Data
shut-off needle in place to prevent Sheet 20190.
accidental discharge while
TUNGSTEN CARBIDE
SAFETY LOCK changing spray tips. The liquid
KNOB
SPRAY TIP inlet connection is available in
LIQUID INLET AIR CYLINDER—
1⁄4) NPS or BSPP (M)
opens valve
(See Note Below)
the standard “down” position or
AIR INLET
⁄ ) NPT or BSPT (F)
18 one of seven other positions in
24AUA intervals of 45°. Write for Data
Sheets 10751 and 13086.
24AUA-8980
Cycles/Min.: 180
Pressure: 4000 psi (280 bar)
Capacity: 0.6 gpm (2.3 l/min)
ORDERING INFORMATION
COMPLETE SPRAY GUN ASSEMBLY
AUTOJET ONLY SPRAY TIP
Model 24AUA-8980 offers the
AA24AUA-8980-8 + 8001- TC same basic design, but is Extension Extension Net
equipped with an extension in a Order No. Length Weight
AutoJet Number Extension Capacity Material
Number or Size Code choice of lengths. The valve stem
Model Number extends throughout the length of 8980-8 8" 2Q\ˆ lbs.
(optional) 8980-12 12" 2Q\‰ lbs.
the extension and the valve seat 8980-18 18" 2E\ˆ lbs.
is directly behind the spray tip for 8980-24 24" 2O\ŒÁ lbs.
instantaneous drip-free control. 8980-36 36" 2QE\ŒÁ lbs.
Write for Data Sheet 15577.
AUTOMATIC SPRAY GUNS—ELECTRIC OPERATION
HIGH PRESSURE LOW PRESSURE
E
26AUH 26AUH-24200-2 ⁄ 12 28JJAU ACCESSORIES 5
Cycles/Min.: 1000 1000 2000 Model 1200
Timing Control
Pressure: 2000 psi (138 bar) 2000 psi (138 bar) air – 125 psi (9 bar)
Capacity: 1.1 gpm (4.2 l/min) 1.1 gpm (4.2 l/min) liquid – 100 psi (7 bar)
25.7 gph (88 l/h)
SPRAY GUNS
Model 1200 timing control is
powered by 115 V or 230 V AC,
50 or 60 Hertz, single phase,
and is designed for use with 24
DESIGN FEATURES DC electrically-operated spray
The 26AUH Electric AutoJet guns. It provides accurate
high speed, high pressure, control of the “delay” and “on”
times of the spray gun.
airless spray gun is for applica- DESIGN FEATURES DESIGN FEATURES
tions requiring an intermittent An external sensor initiates the
The 26AUH-24200-2 ⁄ contains
12 The 28JJAU Compact Electric
spray. The liquid pressure alone cycle, while the user sets the
the same features as the 26AUH AutoJet is a high speed, electri-
provides an atomized spray. The delay and duration times.
AutoJet with the added feature cally automated, intermittent air
gun sprays up to 1000 cycles Internal thumb wheel switches
per minute. A faster version is of a 21⁄2) (63.5 mm) extension atomizing spray gun. The low
independently control “delay”
for interior can coating. Fluid pressure gun is primarily used
also available which sprays up and “on” times.
module replacement is possible for can coating or similar
to 1500 cycles per minute.
without disturbing the mounting applications which require a Electrical connections are made
The gun operates at liquid or electrical connections. more compact-size spray gun. through screw terminal barrier
pressures to 2000 psi (140 bar). strips and all control circuitry is
Higher flow rates are achieved For minimum gun profile, all
Maximum flow rates to 1.1 gpm mounted on one printed circuit
through the straight line liquid connections are located at the
(4.2 l/min). A 1⁄2) (12.7 mm) dia. board. Switches are provided for
flow design. The gun is supplied rear of the gun. The mounting
mounting hole and locking screw “Power” and “Auto/Off/Test.”
with a mounting block that allows and connections are not
allows quick installation and/or Light emitting diodes indicate
easy installation. The gun sprays disturbed by maintenance, as
positioning. A removable fluid power on, output to gun, and
up to 1000 cycles per minute. A the gun’s quick change fluid
module contains all fluid handling sensor input. Write for Data
faster version is also available module allows for replacing wear
parts and is replaced without Sheet 1200.
which sprays up to 1500 cycles parts with minimum downtime.
disturbing the mounting or electri-
cal connections. Wetted parts per minute. Write for Data Sheets All fluid wetted parts are stainless
are made of stainless steel or 26AUH-24200-2!\¤ and 26156. steel, carbide, EPDM rubber, or
Model 22629
tungsten carbide for maximum nylon. The gun may be mounted
Swivel Nut Branch Tee
corrosion resistance. Write for in any position, using a flat bracket
Data Sheets 26AUH and 26157-1. or 5⁄16) (7.9 mm) diameter rod.
In line or 45° spray direction fluid
modules are available. The gun
1
⁄2)/12.7mm DIAMETER LOCKING SCREW
MOUNTING HOLE sprays up to 2,000 cycles per
minute. The gun uses standard
JJ spray nozzle set-ups. Maxi-
TUNGSTEN CARBIDE
SHUT-OFF BALL mum fluid orifice is .028) (.71 mm). The model 22629-SS swivel nut
STAINLESS STEEL
RETURN SPRING LIQUID INLET Write for Data Sheet 28JJAU. branch tee may be used with the
1
⁄4) NPS OR
TIP RETAINER BSPP (M)
26AUH-24200 to provide liquid
recirculation. It is constructed of
stainless steel and has a maxi-
mum operating pressure of 2000
psi (138 bar).
Model 22629-SS features inlet
FLUID and outlet 1⁄2-20 J.I.C. male
TUNGSTEN CARBIDE
MODULE
RETAINER
ORDERING INFORMATION connections for 37° flared tubing.
SHUT-OFF SEAT NUT
STAINLESS STEEL
SHUT-OFF PLUNGER COIL
AA 26AUH - 24200 Write for Data Sheet 22629.
ASSEMBLY
CONDUIT AutoJet Model
CONNECTION Number Number
26AUH
SPRAY GUNS
INTRODUCTION
E
6
SPRAY GUNS
SPRAY
TIP
ADAPTER OR
E16 NOZZLE
EXTENSION
SWIVEL SEE
E13-E14
SPRAY GUN E15 CATALOG
E7-E12 SECTION C
FULL CONE,
FLAT SPRAY
& FINE SPRAY
DESIGN FEATURES
GunJet spray guns are available Adapters for GunJets convert the
in many different designs, from gun outlet from !!\⁄fl"-16 UniJet
high pressure models used in thread to a choice of outlet
car washing to low pressure connection sizes, allowing the
models used for washing produce. attachment of other accessories.
A complete line of accessories Standard one piece spray noz-
is available to complement all zles such as VeeJet flat spray
GunJet spray gun models. nozzles can be used with
GunJets in conjunction with
GunJets are available with a
proper adapters.
choice of extension lengths to
improve the efficiency of your Trigger valve type spray guns
spraying operation. are suitable for use at lower
pressures and smaller capacities.
Swivel connectors prevent hose
Trigger valve guns are also
twisting when using spray guns,
available with extensions and
increasing hose life and reducing
most GunJet accessories.
operator fatigue.
Strainers are available for
GunJets in a choice of screen
mesh sizes and materials.
GunJets are designed for use
with UniJet spray tip assemblies,
available in a wide selection of
spray patterns and flow capacities.
SPRAY GUNS
HEAVY DUTY
HIGH PRESSURE
E
30 CW1500A 60 80 7
Pressure: 1500 psi (105 bar) 1500 psi (105 bar) 2500 psi (175 bar) 3000 psi (210 bar)
Capacity: 5 gpm (19 l/min) 10 gpm (38 l/min) 6 gpm (23 l/min) 10 gpm (38 l/min)
Temperature: 200°F (93°C) 300°F (150°C) 300°F (150°C) 300°F (150°C)
SPRAY GUNS
The Model 30 GunJet is a heavy- The new CW1500A GunJet The Model 60 GunJet is a heavy- The Model 80 GunJet is a
duty impact-resistant spray gun spray gun is specifically designed duty impact-resistant spray gun heavy-duty impact-resistant
with a sturdy nylon handle and for car wash applications. with a sturdy nylon handle and spray gun with a sturdy nylon
trigger guard. The 30 gun is a trigger guard. The 60 gun is a handle and trigger guard. The
Equipped with high-impact nylon
high pressure gun which remains high pressure gun which remains 80 gun is a high pressure gun
handles, a forged brass body,
responsive and easy to operate responsive and easy to operate which remains responsive and
stainless steel working parts and
even at maximum flow and even at maximum flow and easy to operate even at
VITON O-rings, the CW1500
pressure conditions. The light pressure conditions. The light maximum flow and pressure
GunJet is able to withstand the
trigger pull provides positive trigger pull provides positive conditions. The light trigger pull
most demanding environments.
control. The heat-resistant control. The heat-resistant handle provides positive control. The
handle remains comfortable It is capable of delivering flow remains comfortable even at high heat-resistant handle remains
even at high temperatures. A rates up to 10 gpm (38 l/min), temperatures. A special trigger comfortable even at high
special trigger lock feature locks temperatures to 300°F (150°C), lock feature locks in the “off” temperatures. A special trigger
in the “off” position to prevent and pressures to 1500 psi (105 position to prevent accidental lock feature locks in the “off”
accidental discharge and retracts bar). Inlet/outlet connections are discharge and retracts flush into position to prevent accidental
flush into the handle when the available with !\›" and #\°" NPT or the handle when the gun is in use. gun discharge.
gun is in use. BSPT thread.
Model 60 GunJets operate at Model 80 GunJets operate at
Model 30 GunJets operate at A bottom trigger pivot reduces pressures up to 2500 psi (175 pressures up to 3000 psi (210
pressures up to 1500 psi (105 hand fatigue and the gun’s bar) and provide flow rates up to bar) and provide flow rates up
bar) and provide flow rates up overall weight is just 1.5 lbs 6 gpm (23 l/min). Liquid temper- to 10 gpm (38 l/min). Liquid
to 5 gpm (19 l/min). Liquid (680 g). An optional weep atures up to 300°F (150°C) can temperatures up to 300°F (150°C)
temperatures up to 200°F (93°C) feature option prevents freezing be handled. The 60 gun has a can be handled. The 80 gun
can be handled. The 30 gun in cold weather. 3⁄8) NPT or BSPT (F) inlet has a 3⁄8) NPT or BSPT (F) inlet
has a 1⁄4) NPT or BSPT (F) inlet Interchangeable spray nozzles connection. connection.
connection. can be connected to the outlet Model 60 spray guns feature a Model 80 spray guns feature
Model 30 spray guns feature a orifice, providing different flow VITON stem seal and a stainless a VITON stem seal and a
Buna-N stem seal, a TEFLON rates and enabling water saving steel shut-off needle. The valve stainless steel shut-off needle.
valve seat, and a stainless shut- adjustments. body is forged brass or stainless The valve body is forged brass.
off needle. The valve body is steel. Model 60W is supplied with Model 80W is supplied with a
forged brass. Model 30W is sup- a special “weep” feature which special “weep” feature which
plied with a special “weep” feature ORDERING INFORMATION helps prevent freezing. helps prevent freezing.
which helps prevent freezing.
⁄ )-16 THD outlet. Use with
11 16 ⁄ )-16 THD outlet. Use with
11 16
The Model PW4000A GunJet is The PW4000AS GunJet spray The Model 30L GunJet is a The Model 30L-PP GunJet
a durable high pressure spray gun combines high pressure heavy-duty, impact-resistant offers the same basic design as
gun that offers exceptional spray capabilities with operator spray gun with a sturdy nylon the 30L gun but is constructed
operator comfort and control, comfort and control. The gun’s handle and trigger guard. The of polypropylene for excellent
even at maximum flow and bottom trigger pivot reduces 30L gun remains responsive corrosion resistance. The light
pressure conditions. Its unique hand fatigue and the inlet swivel and easy to operate even at trigger pull provides positive
trigger design reduces hand eliminates hose twisting. maximum flow and pressure control. A special trigger lock
fatigue by making trigger pull conditions. The light trigger pull feature locks in the “off” position
The PW4000AS operates at
easier with better leverage than provides positive control. The to prevent accidental discharge
pressures up to 4000 psi (275
other similar guns. A trigger lock heat-resistant handle remains and retracts flush into the
bar), provides flow rates to
locks in the “off” position to comfortable even at high handle when the gun is in use.
10 gpm (38 l/min) and handles
prevent accidental gun discharge. temperatures. A special trigger
temperatures to 300°F (150°C). Model 30L-PP GunJets operate
The PW4000A operates at #\°" inlet and !\›" or #\°" outlet lock feature locks in the “off” at pressures up to 150 psi (10
pressures up to 4000 psi (275 available in NPT or BSPT position to prevent accidental bar) and provide flow rates up to
bar) and provides flow rates up connections. By changing spray discharge and retracts flush into 5 gpm (19 l/min). Liquid tempera-
to 10 gpm (38 l/min). Liquid nozzles, a range of flow rates the handle when the gun is in use. tures up to 120°F (50°C) can be
temperatures up to 300°F (150°C) can be used. Model 30L GunJets operate at handled. 30L-PP has a 1⁄4) NPT
can be handled. 1⁄4) and 3⁄8) NPT pressures up to 250 psi (17 bar) or BSPT (F) inlet connection.
The PW4000AS GunJet spray
and BSPT inlet and outlet and provide flow rates up to 5
gun features impact-resistant Use with UniJet spray tips.
connections are available. gpm (19 l/min). Liquid tempera-
nylon handles, VITON O-rings Write for Data Sheet 30L-PP.
Model PW4000A GunJet and a forged brass valve body tures up to 200°F (93°C) can be
features durable impact-resistant with stainless steel working handled. The 30L gun has a 1⁄4)
nylon handles, VITON stem parts. For safety, a trigger lock NPT or BSPT (F) inlet connection.
seals, and a forged brass valve prevents accidental gun Model 30L spray guns feature
body with stainless steel working discharge when not in use. An a Buna-N stem seal, a TEFLON
parts. An optional “weep” feature optional “weep” feature helps valve seat, and a stainless steel
helps prevent freezing. Write for prevent freezing. Write for Data shut-off needle. The valve body
Data Sheet PW4000A. Sheet PW4000AS. is forged brass.
⁄ )-16 THD outlet. Use with
11 16
SPRAY GUNS
The Model 23624-30L-1⁄4 The Model 30-20940 GunJet The Model 60-21580 GunJet The Model 30L-26323 GunJet
®
MeterJet Spray Gun is offers the same basic design as offers the same basic design spray gun offers the same basic
designed to deliver a precisely the 30L gun. Additionally, the gun and heavy-duty construction as design as the 30L gun but
metered volume of spray features a variable spray pattern the 60 gun. The gun also provides a liquid outlet that uses
solution for low pressure spot that adjusts from a fine mist to a features a variable spray pattern Spraying Systems’ Quick UniJet
applications of chemicals. The full cone and solid stream pattern which is adjustable from a fine caps, seat gaskets and
adjustable metering assembly by pulling back on the trigger. mist to a full cone and solid interchangeable spray tips.
allows the applicator to The gun operates at pressures stream by pulling back on the The gun is corrosion-resistant
discharge precise volumes from up to 250 psi (17 bar) and trigger. The gun operates at as wetted parts are made of
1 to 16 milliliters with a single provides flow rates up to 10 gpm lower pressures to 250 psi TEFLON and stainless steel,
pull of the trigger. Release of (38 l/min). Liquid temperatures (17 bar) with flow rates to 16 gpm with VITON seals. The light
the trigger automatically up to 300°F (150°C). Inlet (60 l/min). Liquid temperatures trigger pull provides positive
recharges the unit for the next connection in 1⁄4) NPT or BSPT up to 300°F (150°C). Inlet control. A trigger lock prevents
dosage. (F). Write for Data Sheet 20940. connection in 3⁄8) NPT or BSPT accidental discharge as it can
(F). Write for Data Sheet 21580. lock in the “off” position. When
Model 23624-30L MeterJet Spray
Gun has a maximum operating the gun is in use, the trigger lock
pressure of 75 psi (5.2 bar) and retracts flush into the handle.
minimum pressure of 25 psi (1.7 Model 30L-26323 GunJet
bar) to charge unit. Inlet con- operates at pressures up to 250
nection available in 1⁄4) NPT or psi (17 bar) and provides flow
BSPT (F). The MeterJet Spray rates to 5 gpm (19 l/min). Liquid
Gun will accept all UniJet spray temperatures to 200°F (93°C).
tips for many types of applications. Liquid connections of 1⁄4) NPT or
BSPT (F) are available. Write for
Data Sheet 26323.
ORDERING INFORMATION
AA 30 - 20940
GunJet Special Model
Number Number
(Optional)
or
Inlet size
Designed for clean-up applica- The 23L GunJet features a The 23H high pressure GunJet The 43LD GunJet features a
tions, the CU150’s trigger and strong aluminum alloy handle features a strong aluminum alloy strong aluminum alloy handle
handle are engineered for reduced with a comfortable trigger grip. handle with a comfortable trigger with a comfortable trigger grip.
operator fatigue. A trigger guard helps prevent grip. A trigger guard helps prevent A trigger guard helps prevent
accidental discharge. 23L guns accidental discharge. 23H guns accidental discharge. A special
Changeable spray caps come
are specially designed so that are designed so that only the trigger lock feature locks the gun
with 10 gpm and 16 gpm capac-
only the inlet body, tip retainer, inlet body, tip retainer, and orifice in any “on” position for easy
ities (38 and 61 l/min). Detachable
and orifice tip touch the liquid tip touch the sprayed liquid. continuous operation.
color bands identify flow rates—
sprayed.
yellow (10 gpm, 38 l/min) or red Model 23H GunJet spray guns Model 43LD GunJet spray guns
(16 gpm, 61 l/min). The color Model 23L GunJet spray guns operate at pressures from 250 operate at pressures up to 200
band also helps identify the operate at pressures up to 250 to 1000 psi (17 to 70 bar) and psi (14 bar) and provide flow
spraying end, for safer operation. psi (17 bar) and provide flow rates provide flow rates up to 5 gpm rates up to 15 gpm (57 l/min).
Spray adjusts from solid stream up to 5 gpm (19 l/min). Liquid (19 l/min). Liquid temperatures Liquid temperatures up to 200°F
to a 50° hollow cone pattern. temperatures to 200°F (93°C) up to 200°F (93°C) can be (93°C) can be tolerated. The
can be tolerated. The gun has a tolerated. The 23H gun has a 43LD gun has !\¤" NPT or BSPT
The CU150 is available in brass
!\›" NPS (M) inlet connection. !\›" NPS (M) inlet connection. (F) inlet connection.
or lightweight aluminum body
Write for Data Sheet 16852. Write for Data Sheet 16010.
construction…both, corrosion- Standard 43LD guns offer a
resistant. A rubber outer cover, Standard 23L GunJet spray Standard 23H GunJet spray guns brass inlet body and tip retainer,
available in black or white, pro- guns offer a nickel-plated inlet offer a nickel-plated inlet body a nylon valve seat, and a stain-
tects against liquid temperatures body and tip retainer, a TEFLON and tip retainer, a TEFLON valve less steel stem with a brass guide.
to 200°F (93°C). 1⁄2) NPT or valve seat and a stainless steel seat and a stainless steel stem
!!\⁄fl"-16 THD outlet. Use with
BSPT (F) inlet connection. Write stem with brass guide. Model with brass guide. Model 23H-SS
UniJet spray tips.
for Data Sheet CU150. 23L-SS features a stainless steel features a stainless steel inlet
inlet body and tip retainer and is body and tip retainer and is ideal
Optional repair kits, replaceable
ideal for spraying corrosive liquid. for spraying corrosive liquids.
rubber body covers, and swivel
connectors are available. The !!\⁄fl"-16 THD outlet. Use with !!\⁄fl"-16 THD outlet. Use with
swivel connectors come with UniJet spray tips. UniJet spray tips.
either hose shank or garden hose
connection and provide a lock-
ring that secures the trigger in
the solid stream spraying position.
Write for Data Sheet 36467. ORDERING INFORMATION
Optional swivel connector No.
11990-19 is also available with !\¤" AA 23L - SS
NPT or BSPT (MxF).
GunJet Material
Number Code
SPRAY GUNS
The 43LC GunJet features a The 43HD high pressure GunJet The 43HC high pressure GunJet The Model 31 GunJet features
strong aluminum alloy handle features a strong aluminum alloy features a strong aluminum alloy a durable brass-forged body and
with a comfortable trigger grip. handle with a comfortable trigger handle with a comfortable trigger a comfortable palm-fitting hand
A trigger guard helps prevent grip. A trigger guard helps grip. A trigger guard helps grip. Instantaneous positive
accidental discharge. A special prevent accidental discharge. A prevent accidental discharge. A trigger action provides immediate
trigger lock feature locks the gun special trigger lock feature locks special trigger lock feature locks drip-free shut-off. An optional
in any “on” position for easy the gun in any “on” position for the gun in any “on” position for trigger lock is available for easy
continuous operation. easy continuous operation. easy continuous operation. continuous spraying.
Model 43LC GunJet operates at Model 43HD GunJet operates at Model 43HC GunJet operates at Model 31 GunJets operate at
pressures up to 200 psi (14 bar) pressures from 200 to 800 psi pressures from 200 to 800 psi pressures up to 500 psi (35 bar)
and provides flow rates up to (14 to 56 bar) and provides flow (14 to 56 bar) and provides flow and provides flow rates up to
15 gpm (57 l/min). Liquid temper- rates up to 15 gpm (57 l/min). rates up to 15 gpm (57 l/min). 5 gpm (19 l/min). The 31 gun
atures up to 200°F (93°C) can be Liquid temperatures up to 200°F Liquid temperatures up to 200°F has a 1⁄4) NPS (M) inlet connec-
tolerated. The 43LC gun has !\¤" (93°C) can be tolerated. The (93°C) can be tolerated. The tion and weighs just 12 oz.
NPT or BSPT (F) inlet connection. 43HD gun has !\¤" NPT or BSPT 43HC gun has !\¤" NPT or BSPT (0.34 kg). A 1⁄4) NPT or BSPT (F)
(F) inlet connection. (F) inlet connection. inlet connection is available by
Standard 43LC GunJet spray
ordering the 31-1/4F GunJet.
guns offer a brass inlet body and Standard 43HD GunJet spray Standard 43HC GunJet spray
tip retainer, a nylon valve seat, guns offer a brass inlet body and guns offer a brass inlet body and Model 31 GunJets offer a nickel-
and a stainless steel stem with a tip retainer, a nylon valve seat, tip retainer, a nylon valve seat, plated steel trigger and a stainless
brass guide. and a stainless steel stem with a and a stainless steel stem with a steel valve stem. The valve seat
brass guide. brass guide. and packing are made of TEFLON.
Model 43LC-1/2 has a !\¤" NPT
or BSPT (F) outlet connection. !!\⁄fl"-16 THD outlet. Use with Model 43HC-1/2 has a !\¤" NPT ⁄ )-16 THD outlet. Use with
11 16
UniJet spray tips. or BSPT (F) outlet connection. UniJet spray tips. Write for Data
Model 43LC-3/4 has a #\›" NPT
Sheet 9079.
or BSPT (F) outlet connection. Model 43HC-3/4 has a #\›" NPT
or BSPT (F) outlet connection.
ORDERING INFORMATION
AA 31
GunJet
Number
Model 23L-7676 GunJets offer The extension features a valve Model 30L-22425 GunJets feature extension in a variety of lengths.
all the features of the standard seat which is located directly the same basic design and Drip-free shut-off is provided by
23L GunJets with the addition behind the spray tip for instanta- performance as standard 30L the valve stem which extends
of a brass or stainless steel neous drip-free shut-off. Write GunJets. In addition, 30L-22425 the full length of the extension.
SPRAY GUNS
extension in a variety of lengths. for Data Sheet 7676. GunJets feature a brass tubing Write for Data Sheet 30L-22425.
EXTENSIONS
Model 9004-SS is a high pressure Model 9702S is a straight high Model CP12087 is a high Model 6960 is a low pressure
stainless steel extension assem- pressure extension usually pressure aluminum extension extension assembly which features
bly with !!\⁄fl"-16 UniJet thread supplied with a 7890 cap with an with !\›" NPT or BSPT (M) inlet a siphon attachment with adjustable
inlet and outlet connections. !!\⁄fl"-16 UniJet thread inlet con- and outlet connections. liquid flow. The assembly includes
nection and a tungsten carbide a spray tip and is constructed of
Model 11806 is a high pressure Model 12086 is a high pressure
spray tip. The extension body is brass. The inlet connection is
extension assembly with !!\⁄fl"-16 extension assembly with !!\⁄fl"-16
constructed of black oxide- !!\⁄fl"-16 UniJet thread.
UniJet thread inlet and outlet UniJet thread inlet and outlet con-
coated steel. Cap and spray tip
connections and a !\›" NPS (M) nections. It is constructed of brass. Model 22665 is a medium
must be ordered separately.
liquid recirculating connection. It pressure extension assembly with
Model 7715 is a medium pres-
is available only in brass except Model 9702A offers the same !!\⁄fl"-16 (F) UniJet® thread inlet and
sure extension assembly with
for the 8" model which is also design as the 9702S extension outlet connections. Extension tube
!!\⁄fl"-16 UniJet thread inlet and
available in stainless steel. with a tip that projects a spray made of polyester, polypropylene
outlet connections. It is available
pattern at a 90° angle to the adapters and caps, with EPDM
Model 15250 is a high pressure in stainless steel and brass.
extension body. O-rings.
extension assembly with #\°"
Model 14975 is a medium pres-
NPT or BSPT (M) inlet end !!\⁄fl"- Model 9702C offers the same
16 UniJet thread outlet connec- design as the 9702S extension sure extension assembly with an MATERIAL CODES
!!\⁄fl"-16 UniJet thread inlet and
tions. It is available in stainless with a curved extension body. no material = Brass
!\°" NPT or BSPT (M) outlet con-
steel and zinc-plated steel and is SS = 303 Stainless Steel
Model 15699 is a high pressure nection. Construction is of brass.
supplied with an adjustable hand IZP = Zinc-plated Steel
extension assembly with !!\⁄fl"-16
grip for easy gun control. Model 6671 is a medium pres- AL = Aluminum
UniJet thread inlet and outlet
sure extension assembly with a I = Iron
Model 20400 is a high pressure connections. It features brass
curved body and !!\⁄fl"-16 UniJet
extension assembly with a !\›" construction and a rubber
thread inlet and outlet connec-
NPT or BSPT (M) inlet and a !\›" insulated body.
tions. Construction is of brass.
NPT or BSPT (M) or !\°" NPT or
Model 9527 is a high pressure
BSPT (F) outlet connection. It is
extension assembly with !!\⁄fl"-16 Model 4673 is a low pressure ORDERING INFORMATION
available in stainless steel or curved extension assembly with
UniJet thread inlet and outlet
zinc-plated steel.
connections and a curved body. a swivel nozzle body. Inlet and
outlet connections are !!\⁄fl"-16
7715 - 18 - SS
Model 13781 is a high pressure It is constructed of brass with a
UniJet thread and the unit is brass. Extension Extension
extension usually supplied with a rubber insulated body. Material
Number Length Code
7890 cap with !!\⁄fl"-16 UniJet (in inches)
thread inlet connection and a
13783 hollow cone spray tip.
Cap and spray tip must be
ordered separately.
EXTENSIONS (CONT.)
SPRAY GUNS
Maximum
43 1767 ⁄4
31 605 8
-1
-12 - 3⁄
Length
43 767
Extension Material Pressure
Available
24 H
30 A
0
9004 psi
-11
No. Available
AU
AU
LD
46 4
88
66
04
90
65
-1
36 1
-⁄
inches/mm
E (bar)
22
60
80
23
43
43
64
61
65
22
8) / 203
14 12) / 305
SS (acero)
11806 9004 18) / 457 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
inoxidable) 280
24) / 610
36) / 914
8) / 203
12) / 305 Brass (all)
11806 18) / 457 280 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
SS (8) only)
24) / 610
15250 36) / 914
18) / 457 IZP
15250 210 ⓦ ⓦ
SPRAY GUNS
36) / 914 SS
18) / 457 IZP
20400-1⁄4 M 20400-1⁄4 M 210 t t ⓦ ⓦ ⓦ ⓦ ⓦ
36) / 914 SS
18) / 457 IZP
20400-1⁄8 F 210 t t ⓦ ⓦ ⓦ ⓦ ⓦ
36) / 914 SS
1
20400- ⁄8 F 10) / 254 Mild
13781S 16) / 406 Steel 135 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
1 48) / 1219
10) / 254
13781S 24) / 610 Mild
9702S 135 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
48) / 1219 Steel
2 60) / 1524
10) / 254
9702S 24) / 610 Mild
9702A 135 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
48) / 1219 Steel
3
60) / 1524
9702A 10) / 254
24) / 610 Mild
9702C Steel 135 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
4 48) / 1219
60) / 1524
8) / 203
18) / 457
9702C 15699 24) / 610 Brass 70 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
36) / 914
48) / 1219
8) / 203
15699 18) / 457
9527 24) / 610 Brass 70 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
36) / 914
48) / 1219
9527 8) / 203
18) / 457
CP12087 Aluminum 70 ⓦ ⓦ ⓦ ⓦ
24) / 610
36) / 914
CP12087
8) / 203 Aluminum
18) / 457
12086 and 70 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
24) / 610 Brass
36) / 914
12086
8) / 203
12) / 305 Brass (all) 250-Brass ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
18) / 457 (17)
7715 7715 24) / 610
30) / 762 SS
36) / 914 8, 18, 35 ⓦ ⓦ ⓦ ⓦ
48) / 1219 24, 36
8) / 203
18) / 457 Brass (all)
6671
24) / 610
6671 SS 8 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
30) / 762 (36)only)
36) / 914
48) / 1219
8) / 203
18) / 457
4673 24) / 610
4673 30) / 762 Brass 8 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
36) / 914
48) / 1219
6960 72) / 1828
6960 81⁄2 )/ 216 Brass 7 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
14975 18) / 457 Brass 17 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
14975 15) / 381 Polypro-
22665 pylene
10 ⓦ
24) / 610
1 shown with 7890 cap & 13783 tip assembly t use with 14643-1⁄4-SSP stainless steel adapter
22665 2, 3, & 4 shown with 7890 cap & tungsten carbide orifice insert.
SWIVEL CONNECTORS
SPRAY GUNS
designed for use with GunJet constructed of brass and are operate at pressures up to 4000 (F) outlet connection. They are
spray guns. They attach to the available with pipe thread or hose psi (280 bar). Write for Data recommended for pressures up
inlet of spray guns to provide a shank connections in a variety of Sheet 9765. to 3000 psi (210 bar) and
smooth, leakproof, 360° swivel sizes. They operate at pressures temperatures up to 200°F (93°C).
connection. Swivel connectors up to 1000 psi (70 bar) and Write for Data Sheet 15950.
prolong hose life by eliminating temperatures up to 180°F (82°C).
21550-90NP
kinking and they reduce operator
fatigue as well.
21550
PRESSURE
Swivel CONNECTION Approx. RANGES
Connection
Ordering THREAD SIZES* Overall
Type Up To
No. (NPT/ BSPT or NPS) Length Up To
800 psi 1000 psi
21550-90NP high pressure 21550 series swivel connectors
11990-7 Q\‰" (F) NPT Q\‰" (F) NPT 2Q\ŒÁ" ✓
swivels are constructed of nickel- are made of brass and offer a
FEMALE 11990-10 Q\‰" (F) NPT Q\‰" (F) NPS 2" ✓
X 11990-14 E\ˆ" (F) NPT E\ˆ" (F) NPT 2" ✓ plated brass with Delrin bearings variety of pipe size connections.
FEMALE 11990-17 Q\„" (F) NPT Q\„" (F) NPT 2T\ŒÁ" ✓ and Buna-N O-ring, and features They operate at pressures up to
11990-20 E\ˆ" (F) NPT Q\‰" (F) NPS 1E\‰" ✓ a choice of a !\›" NPT or BSPT 1500 psi (105 bar) and temper-
11990-8 Q\‰" (M) NPT Q\‰" (M) NPT 2Q\‰" ✓ (M) or #\°" NPT or BSPT (M) atures up to 200°F (93°C). Write
MALE ✓
11990-13 Q\‰" (M) NPT Q\‰" (M) NPS 2Q\‰" inlet, and a #\°" NPT or BSPT (F) for Data Sheet 21550.
X ✓
11990-15 E\ˆ" (M) NPT E\ˆ" (M) NPT 2T\ŒÁ"
MALE ✓ outlet connection. They have a
11990-18 Q\„" (M) NPT Q\„" (M) NPT 2E\‰"
11990-6 Q\‰" (M) NPS Q\‰" (F) NPS 2Q\ŒÁ" ✓ maximum temperature of 200°F
MALE 11990-9 Q\‰" (M) NPT Q\‰" (F) NPT 2E\ŒÁ" ✓ (93°C) and a maximum pressure 36466
11990-12 Q\‰" (M) NPT Q\‰" (F) NPS 2Q\ˆ" ✓ of 1500 psi (103 bar). Write for
X ✓
11990-16 E\ˆ" (M) NPT E\ˆ" (F) NPT 2Q\‰" Data Sheet 21550-90.
FEMALE ✓
11990-19 Q\„" (M) NPT Q\„" (F) NPT 2T\ˆ"
11990-21 E\ˆ" (M) NPT Q\‰" (F) NPS 2" ✓
E
16 7029 14269 4676 15572
SPRAY GUNS
Type 7029 adapters provide a Type 14269 adapters are made Adapters are available to modify Type 15572 adapters secure the
#\›" garden hose thread (F) inlet of brass and provide a #\›" garden outlet connections on AutoJet valve seat in the inlet body of
and a !\¤" NPT or BSPT (M) hose thread (F) inlet with a !\›" and GunJet spray guns for easy 22AUH AutoJets and 23 and 31
outlet. Construction is of brass. NPS (F) outlet. Write for Data connection with hoses, nozzles, GunJets and permit the use of
Write for Data Sheet 7035. Sheet 14353. extensions and other accessories strainer assemblies directly
of various sizes. behind the spray tip. Female
inlet and male outlet connections
Type 4676 adapters convert
13212 Adapter
No.
Outlet
Conn.
Inlet
Conn. spray gun outlets from standard are both !!\⁄fl"-16 thread. Type
15572 adapters are made of
7029 ⁄ ) NPT or BSPT (M) 3⁄4)
12 !!\⁄fl"-16 thread connections to a
brass and operate at pressures
14269 1⁄4) NPS (F) Garden choice of !\°", !\›", #\°", !\¤" or #\›"
3⁄8) NPT or BSPT (M) Hose
up to 800 psi (55 bar). Write for
13212-3⁄8 NPT or BSPT (F) outlet connec-
Thread Data Sheet 15578.
13212-1⁄2 1⁄2) NPT or BSPT (M)
(F) tion. Type 4676 adapters are
available in brass or stainless
steel and operate at pressures
up to 2000 psi (140 bar) in
Type 13212 adapters feature
stainless steel. Write for Data
brass construction. They provide
Sheet 10896
a #\›" garden hose thread (F) inlet
connection and a choice of #\°" or
Outlet Conn. Inlet
!\¤" NPT or BSPT (M) outlet
connections. Write for Data
Adapter
No.
NPT or Conn. 10997
BSPT (F) (F)
Sheet 13223.
4676-1⁄8 ⁄)
18
4676-1⁄4 ⁄)
14
⁄ )-16
11 16
3⁄8)
4676-3⁄8 UniJet
1⁄2) Thd.
4676-1⁄2
3⁄4)
4676-3⁄4
7599 Adapter
No.
Outlet
Conn.
Inlet Conn.
NPT or 14643
NPS (F) BSPT (F)
Type 10997 adapters are used
7599-1⁄4 ⁄)
14
with guns having a 1" -14 (M)
⁄)
14
3⁄8)
7599-3⁄8
connection. The adapter outlet
is either !\›" or #\°" NPT or BSPT
(F). The 10997 adapter is
stainless steel and designed for
use up to 3000 psi (210 bar).
Write for Data Sheet 14721.
Type 7599 adapters offer a
choice of !\›" or #\°" NPT or BSPT
Type 14643 adapters modify
(F) inlet connections with a !\›"
gun outlets from !!\⁄fl" -16 (M)
NPS (F) outlet. Construction is
thread connections to either !\°"
of brass or stainless steel and
or !\›" NPT or BSPT (F) outlets.
the stainless steel 7599 adapter
They are constructed from
operates up to 2000 psi (140 bar).
stainless steel or nickel-plated
Write for Data Sheet 7599.
steel and are designed for pres-
sures up to 4000 psi (280 bar).
Write for Data Sheet 14721.
Special Purpose
Spray nozzles
section F
INDEX
Motor Driven Rotary Tank Washers...................F2, F3
Stationary Tank Washing Nozzles ...........................F4
Rotary (Fluid Driven) Tank Washing Nozzles....F5, F6
Foam Control, Self-Cleaning, Tube Cleaning,
and Hot Melt Glue Tips .........................................F7
DescaleJet® High Impact Nozzles
Self-Aligning, One Piece and Dove Tail .........F8, F9
CasterJet® ................................................................F9
SprayDry®
Fine Atomization Spray.......................................F10
AirJet® Fogger .......................................................F11
Adjustable Ball-Type Nozzles
Clip-Eyelet® Type
Threaded Type....................................................F12
WindJet® Blow-off Nozzles....................................F13
Self-Cleaning Manifold System......................F14, F15
Moisturizing/Coating Header .........................F16, F17
Flowback Nozzle Lances .......................................F18
MOTOR DRIVEN ROTARY TANK WASHERS
F Air Motor
Operates to 500 psi (35 bar)
Electric Motor
Operates to 500 psi (35 bar)
The 190 series tank washers
feature high impact cleaning and
significant liquid savings com-
The 190 series tank washers
feature durable construction. All
wetted parts are of 316 stainless
2 steel or TEFLON for maximum
pared to lower pressure tank
washing machines. corrosion resistance.
SPECIAL PURPOSE
AA190E-3* 3( 14 lbs.
AA190E-4* 4( 151⁄2 lbs.
Max. recommended dia. Max. recommended dia. AA190E-6* 6( 181⁄2 lbs.
coverage – 12( (3.7 m) coverage – 12( (3.7 m) *Specify solid stream nozzle no. –
for high impact for high impact such as 1⁄4MEG-0040
PERFORMANCE DATA
AIR MOTOR DATA
TOTAL FLOW OF 2 NOZZLES (EQUAL CAPACITY)
GALLONS PER MINUTE Air Approx. Air
1 Complete
NOZZLE LIQUID INLET PRESSURE (psi) Pressure at Speed Consumption
Cycle (min.)**
NO. 100 200 300 400 500 Motor psi rpm* scfm
14
⁄ MEG-0010 3.1 4.4 5.4 6.3 7.0 40 3.0 10.4 12
14
50 3.2 11.7 11
⁄ MEG-0015 4.7 6.6 8.1 9.4 10.5 60 3.4 13.0 10
1⁄4 MEG-0020
6.2 8.8 10.8 12.4 13.9
1⁄4 MEG-0025
* Assuming both exhaust filters are clean.
7.7 10.9 13.3 15.4 17.2 ** 35 revolutions are required for 1 complete cycle.
1⁄4 MEG-0030
9.1 12.9 15.8 18.2 20.4
1⁄4 MEG-0035
10.5 14.8 18.1 20.9 23.5
1⁄4 MEG-0040
11.8 16.7 20.4 23.6 26.4 ELECTRIC MOTOR DATA (115VAC)
1⁄4 MEG-0050
14.2 20.1 24.6 28.4 31.8
1⁄4 MEG-0060 AC Speed Current Power 1 Complete*
16.4 23.2 28.4 32.8 36.7
Frequency rpm amps watts Cycle (min.)
1⁄4 MEG-0070
18.3 25.9 31.7 36.6 41.0
50 HZ. 4.0 .6 40 9
1⁄4 MEG-0080
19.9 28.2 34.5 40.0 44.5 60 HZ. 4.8 .5 34 8
NOTE: Flow rates tabulated above include pressure drop through unit. *35 revolutions are required for 1 complete cycle.
Pressure drop through the unit in this area should be evaluated when sizing
pumps. Consult a Spraying Systems Co. Rep. for specific information.
190AH DESIGN FEATURES 290A DESIGN FEATURES
Air Motor
Operates to 1000 psi (69 bar)
The 190AH is designed for high
pressure applications…up to
1000 psi (69 bar). The high
Air Motor Drive
Max. 250 psi (17 bar)
The Model 290A tank washer
can be job tailored to accomplish
specific requirements by (1)
F
velocity impact of the solid stream
3
changing flow rates through
spray is ideal for many cleaning nozzle selection, (2) by adjusting
and scouring applications that
SPECIAL PURPOSE
liquid inlet pressure from 0-250
cannot be accomplished with psi (0-17 bar), and (3) by chang-
lighter duty cleaning units. ing air motor speed to regulate
Like the 190A tank washer, the the speed of the turret. In addition,
190AH features an external air the turret with its standard two
drive motor, located away from solid stream nozzle set-ups can
dirt and corrosive cleaning be fitted with four nozzles for
solutions. The spray turret fits more difficult cleaning applica-
through a 3) (76 mm) diameter tions. Spray head will fit through
tank opening and features a 7) (178 mm) diameter hole.
1) NPT or BSPT (F) liquid inlet
connections. The Model 290A is available with
3(, 4( or 6( (0.9 m, 1.2 m or 1.8
Rotational speed of the nozzle m) extensions, and features a
turret is independent of the standard adjustable flange for
cleaning liquid pressure and accurate positioning of the turret
flow. The nozzle turret accom- within the tank. Liquid inlet
modates two 1⁄4 MEG WashJet®
connection 2) NPT or BSPT (F).
nozzles that operate to a
maximum recommended flow All wetted parts feature 316
rate of 20 gpm (76 l/min). The stainless steel or TEFLON.
190AH handles liquid temper- Suitable for use with virtually
atures to 200°F (93°C). All any cleaning solution.
wetted parts are of 316 stainless
steel or TEFLON for excellent
corrosion resistance.
ACCESSORIES AA190AH-3*
AA190AH-4*
3(
4(
11 lbs.
12 1⁄2 lbs.
AA290A-3*
AA290A-4*
3(
4(
43 lbs.
47 lbs.
AA190AH-6* 6( 151⁄2 lbs. AA290A-6* 6( 56 lbs.
Model 22250 Adjustable Flange Max. recommended dia.
for variable adjustment of spray *Specify solid stream nozzle no. – coverage – 40( (12.2 m) *Specify solid stream VeeJet nozzle no. –
such as 1⁄4MEG-0040. such as H3⁄4U-00100.
turret into tank.
DESIGN FEATURES
Type 6353 and 12900 nozzle
assemblies provide effective
washing or rinsing of tanks of
many sizes.
Both models feature 13 full cone
nozzles which spray all interior DESIGN FEATURES
tank surfaces at pressures up to
60 psi (4 bar). Nozzle headers The type 12900-1 nozzle assem- The 15498 and 3150 keg and head diameter is 1#\°" (35 mm)
are available in brass, mild steel, bly offers an extra large flow drum washing nozzles are with a %\°" (16 mm) neck which
and stainless steel. capacity for cleaning larger tanks specially designed for the efficient allows for drainage while washing.
up to 22' (6.7 m) in diameter. cleaning of smaller vessels. Stainless steel construction
The type 6353 nozzle assembly Flow rates can be varied by using Both models offer a choice of 15 provides maximum corrosion
features a large flow capacity for !\¤", #\›" or 1" full cone nozzles. or 21 full cone spray tips which resistance.
cleaning tanks up to 10' (3.1 m) The 12900-1 can fit through tank
in diameter. Flow rates can be spray all interior surfaces at The type 3150 is available in
openings 9" (230 mm) in diameter.
varied by using !\›" or #\°" full cone pressures up to 150 psi (10 bar). brass or stainless steel. It
nozzles. The 6353 fits through For deep tanks, the type 12900-2 features a maximum spray head
The type 15498 is designed to
tank openings 5" (130 mm) in is available with a 1!\¤" bottom diameter of 1%\°" (41 mm) with a
pass through a standard keg
diameter or more. outlet connection for use with a #\›" (19 mm) neck to allow
bung, and to fit on automatic keg
pipe extension and a 6353 drainage during washing.
washers. The maximum spray
nozzle assembly.
PERFORMANCE DATA
TOTAL gpm and Approx. Max. Tank Size
Pipe With 13 at Pressure (psi) DIMENSIONS
Nozzle Tank
Size Nozzle FullJet 20 psi 30 psi 40 psi 50 psi
Header Diam.
NPT or Order Nozzles
Order Tank Tank Tank Tank “A”
BSPT No. Order feet Ht. Diam.
(F)
No.
No. gpm Diam. gpm Diam. gpm Diam. gpm Diam.
“A” “A” “A” “A” “B” “C”
feet feet feet feet
12900-1-1⁄2 12
⁄ HH-40 72 10' 86 11' 99 12' 109 13' 6QU\´„" 7Q\„"
DIMENSIONS & WEIGHTS
3) 12900-1-3⁄4 34
⁄ HH-7 148 12' 180 13' 205 15' 225 17' 6WU\´„" 8Q\‰"
12900-1-1 1HH-12 252 14' 306 16' 350 19' 385 22' 7U\´„" 9" Based on largest/heaviest version of each type.
6353-1⁄4GG5 8.9 10.8 12.3 13.6 4' 4Q\„" 4Q\„"
11⁄2) 6353-1⁄4GG10 17.9 22 25 27 7' 4Q\„" 4Q\„"
6353-3⁄8GG22 39 48 55 60 10' 4E\‰" 5"
PERFORMANCE DATA
1⁄)
12
CAPACITY
PIPE (gallons per minute)
Nozzle Order No.
10 20 30 40 60 80 100 150
psi psi psi psi psi psi psi psi
6353
15498-15-SS 5.5 6.3 7.0 8.5
15498-21-SS — — — — 7.7 8.7 9.6 11.7
3150-15 5.2 7.3 8.7 9.9 12.1 13.8 15.3 19.0
3150-21 7.0 9.8 11.7 13.3 16.2 18.5 20.6 25.6
“A” Diam.
Cylindrical Tank
ROTARY TANK WASHING NOZZLES
SPECIAL PURPOSE
DESIGN FEATURES
The compact 23240 nozzle will
fit through a 11⁄32) (26 mm) diam- DESIGN FEATURES
eter hole. Two flat spray orifices The Model 36640 mini tank wash-
are positioned to produce the ing nozzle’s compact size fits
DESIGN FEATURES self-rotating force and provide through 11⁄32) (26 mm) diameter
side sprays. In Model 23240-3 a and larger tank openings.
The 21400 and 18250 rotating The 21400 compact rotating type
top orifice is added, resulting in
type nozzles provide effective drum cleaning nozzle fits through The nozzle can operate at lower
a full spherical spray coverage.
internal scrubbing of small tanks openings just 21⁄4) (60 mm) in pressures and flow rates than
and drums. diameter and weighs just 1 lb. Nozzle material is 316SS, typical spinning nozzles and is
(.45 kg), making it perfect for bearings and races made of ideal for small container rinse
Both the 21400 and the 18250
drum and barrel washing. Low hardened stainless steel for applications.
feature three high impact flat
capacity flat spray tips are ideal maximum wear life…or…type
sprays mounted in a rotating The mini rotating nozzle is
for cleaning small vessels. 316 series stainless steel
spray head which is driven by the equipped with 2 flat spray tips
(optional) for maximum corrosion
flow of the cleaning liquid. These The 18250 rotating type tank and that provide cylindrical spray
resistance.
orifices are precisely positioned drum cleaning nozzle fits through coverage. The nozzle will spin in
to provide complete orbital holes just 27⁄32) (60 mm) in diam- WEIGHT 1⁄2 lb. (0.23 kg). any mounted position. Stainless
coverage of all interior surfaces. eter and weighs 1.5 lbs. (.68 kg). Maximum operating pressure is steel with hardened stainless
Slightly larger orifice capacities 200 psi (13.8 bar). Maximum steel bearings and races. Write
Type 316SS with bearings and
are available for effective clean- temperature is 350°F (177°C). for Data Sheet 36640.
races of hardened stainless steel
ing of tanks, barrels, and drums. Write for Data Sheet 23240.
for maximum wear life, or 316SS
for maximum corrosion
PERFORMANCE DATA
resistance. High impact scouring
is achieved with spray pressures CAPACITY (gallons per minute)
Nozzle Order No.
up to 100 psi (7 bar). 10 psi 20 psi 30 psi 40 psi 50 psi 60 psi
36640-1.7-SS .8 1.2 1.5 1.7 1.9 2.2
PERFORMANCE DATA
CAPACITY (gallons per minute)
CAPACITY (gallons per minute) Nozzle Order No. 20 40 60 80 100 120 150 200
Nozzle Order No.
10 psi 20 psi 30 psi 40 psi 50 psi 60 psi psi psi psi psi psi psi psi psi
23240-2-HSS-5-316SS 3.5 5.0 6.1 7.1 7.9 8.7 9.7 11.2
21400-HSS10-316SS 5 7.1 8.7 10 11.2 12.2 23240-2-HSS-8-316SS 5.7 8.0 9.8 11.3 12.6 13.9 15.5 17.9
21400-HSS18-316SS 9 12.7 15.6 18 20 22 23240-3-HSS-5.7-316SS 4.0 5.7 7.0 8.1 9.0 9.9 11.0 12.7
18250-HSS21-316SS 10.5 14.8 18.2 21 23 26 23240-3-HSS-7-316SS 4.9 7.0 8.6 9.9 11.1 12.1 13.6 15.7
18250-HSS45-316SS 23 32 39 45 50 55 23240-3-HSS-10-316SS 7.1 10.0 12.2 14.1 15.8 17.3 19.4 22.0
D IA.
ROTARY TANK WASHING NOZZLES
TEFLON TYPE®
27500 28500
F
6
SPECIAL PURPOSE
360°
E
FOAM CONTROL SELF-CLEANING TUBE CLEANING HOT MELT
NOZZLE NOZZLES NOZZLES GLUE TIPS
22561 20235 10706 26280 26281
Write for Data Sheets 20235 and
20235-2. F
7
SPECIAL PURPOSE
DESIGN FEATURES 20210 DESIGN FEATURES DESIGN FEATURES
The foam control nozzle is specif- Write for Data Sheets 20210 and The 10706 series tube cleaning Hot melt glue tip models 26280
ically designed for use on aeration 20210-2. nozzle features very high impact and 26281 are designed to fit
tanks in waste treatment plants. cleaning from six solid stream most standard and hand-held
sprays at operating pressures up extrusion guns. These econom-
It provides a deflected flat spray
to 5000 psi (350 bar). 10 degree ical glue tips each provide seven
pattern at low pressures. If
clogging occurs, simply lift the backward spray projection aids orifice diameters to choose from.
counterweight lever and allow in propelling the nozzle through The tips are constructed of brass
the solid stream flow to purge the tube. for reliable performance. Wear-
the nozzle. The 10706 series nozzle features resistant stainless steel orifices
The foam control nozzle features
DESIGN FEATURES hardened stainless steel construc- provide long wear life.
rugged bronze construction with tion. It has a 1⁄8) NPT or BSPT (F)
The 20235 series and 20210 The cap type model 26280 is
a neoprene rubber deflector and inlet connection and a maximum
series nozzles are available in designed for automatic produc-
a 1⁄4) NPT or BSPT (M) inlet con- outside diameter of 1⁄2) (12.7 mm).
fan or needle jet versions and tion line applications. Model
nection. Write for Data Sheet are self-cleaning to maintain 26281 is threaded and designed
22561. effective shower performance for either automatic or handgun
with minimal effort. applications.
Reducing the line pressure 11⁄32)
For more information, write for
retracts a purge piston to purge (8.7 mm) Bulletin 318.
fibers and other suspended Flats
solids from the clogged nozzle. 5⁄16)
This feature makes them (7.9 mm)
particularly well-suited for use “B” Diam. Diam.
Spray with white water.
The 20235 series and 20210 6 Holes Equally
series nozzles are specially Spaced-“A” Diam.
designed to interchange with
Lodding self-cleaning shower
1⁄2)
nozzles. They provide fast and
easy installation and alignment. (12.7 mm)
Diam.
Their longer length allows more
pattern offset to eliminate spray
interference and provides greater
resistance to piston binding. Both
models are constructed of 316
stainless steel.
Purge
PERFORMANCE DATA
CAPACITY “A” “B”
Nozzle (gallons per minute) Diam. Diam.
Order
300 500 1000 2000 5000 in in
No.
psi psi psi psi psi inches inches
Spray 10706-HSS .21 .58 .74 1.1 1.5 2.4 .015 .015
10706-HSS .43 1.2 1.5 2.2 3.0 4.8 .022 .022
10706-HSS .54 1.5 1.9 2.7 3.8 6.0 .025 *
10706-HSS .57 1.6 2.0 2.9 4.0 6.4 .025 .025
10706-HSS 1.04 2.9 3.7 5.2 7.4 11.6 .033 .033
10706-HSS 2.08 5.7 7.4 10.4 14.7 23 .047 .047
10706-HSS 4.2 11.5 14.9 21 30 47 .067 .067
22561 with Split-Eyelet * No. 10706-HSS .54 is supplied without front orifice.
connection
Purge
SPRAY NOZZLES
HIGH IMPACT
SELF-ALIGNING ONE PIECE
AA117AC AA118AC AA218AC H3⁄8UHSS-E 3⁄4 USSTC-E
F Write for Data Sheet 117AC. Write for Data Sheet 118AC. Write for Data Sheet 218AC. Write for Data
Sheets 6120
and 6120-1
Write for Data
Sheets 7870
and 7870-1M.
8
SPECIAL PURPOSE
3⁄4) NPT or
BSPT (M)
Tungsten
3⁄4) USSTC—E
Carbide
DESCALEJET NOZZLE ASSEMBLY
®
Orifice DescaleJet Nozzle
Insert Stainless Steel
(Standard Set-up) (Optional Set-up) Body and Tip Holder
DESCALEJET NOZZLES
DescaleJet Pipe Conn. Orifice Used with Hi-Impact Attachment No. Used
Stainless steel adapter Nozzles NPT or Mat. with Self
and BSPT (M) 21331-1- 21331-2- Strainer Align.
Assemblies E\ˆ E\‰ 1 HSS TC 127A 127B 127C 128A 128B 128C 13336 Note (1) Note (2) 11441
No. 21330-2 high
impact attachment with 117 Á Á Á** Á** Á** Á** Á
stabilizer vane, strainer, 117C Á Á Á** Á** Á** Á** Á
117A Á Á Á** Á** Á** Á** Á
and spray tip sub- 117AC Á Á Á** Á** Á** Á** Á
assemblies 118 Á Á Á Á Á Á Á
118C Á Á Á Á Á Á Á
118A Á Á Á Á Á Á Á
No. 21330-1 high 118AC Á Á Á Á Á Á Á
impact attachment with 218C Á Á Á Á Á
stabilizer vane and 218AC Á Á Á Á Á
spray tip sub-assembly H 3⁄8UHSS-E Á Á Á* Á* Á* Á*
3⁄4USSTC-E Á Á Á Á Á Á
Stainless steel retainer 17585 Á Á Á Á***
21127 Weld Conn. Á Á Á***
DOVETAIL
21127 21123 21125 19930
max. 3000 psi (210 bar)
Write for Data Sheet 21127.
max. 1500 psi (100 bar)
Write for Data Write for Data F
Sheet 21123. Sheet 21125. 9
SPECIAL PURPOSE
DESIGN FEATURES DESIGN FEATURES
●
Interchangeable spray tips Tip materials are offered to Developed to fulfill the exacting All critical parts are interchange-
slide in the groove with the accommodate a wide range of needs of continuous casting, the able. Various length extensions
spray pattern offset 15° service conditions and include patented (Pat. No. 4,349,156) can be shaped to fit customer
tungsten carbide, hardened CasterJet nozzle delivers a needs. The non-clogging design
●
Nozzle bodies available for
stainless steel, stainless steel precise mixture of air and water uses smooth, clean passages.
full or spot welding to pre-
and brass. in a flat fan spray pattern. This Metering orifices for both air and
aligned setting in headers
finely atomized spray provides water facilitate fine tuning flow
High Pressure Assemblies:
●
The spray tip is secured in high heat transfer rates for fast rates even within the same air
position with the cap 17585 and 21127 heat removal. or water pressure system. The
The self-aligning spray tips in Maximum operating pressure unique features of the CasterJet
●
Uniform water distribution
these assemblies are well-suited of 3000 psi (210 bar) provide spray accuracy and
●
Wide operating range efficiency in an easily maintained
to the rugged needs of industry. Medium Duty Assemblies:
The dovetail groove provides ●
Low air quantity demands product.
accurate, repeatable pattern 18893, 21123, 21125 ●
Non-clogging design Materials:
positions in descaling, roll and 19155
●
Self-aligning spray tips CasterJet Length Body,
cooling, continuous casting and Maximum operating pressure Model No. Approx. Tubing and
similar operations. of 1500 psi (100 bar) The atomization is produced by Target Bolt
a unique new design. Water is 19920-78-BRSS 3E\´„"
forced into the expansion cham- 19925-200-BRSS 7U\ˆ" BRASS
ber as a high velocity stream. It 19930-78-BRSS 3E\´„" AND
19930-100-BRSS 3QT\ŒÁ" STAINLESS
shatters against a long-wearing 19930-150-BRSS 5WO\´„" STEEL
target pin to give fine droplets 19930-200-BRSS 7U\ˆ"
while an air stream rushing past NOTE:
the pin creates further break-up. Model No. 19920 uses Spray Set-ups
E\ˆ CJL-6.5 thru 8
The resulting atomized spray is
Model No. 19925 uses Spray Set-ups
found to be so effective at cooling
Q\„ CJL-9 thru 12
that significant reductions in
Model No. 19930 uses Spray Set-ups
water volumes are possible. E\ˆ CJL-2.5 thru 5
SX ST SB
⁄ ), 3⁄8) NPT or BSPT (F)
14 ⁄ ), 3⁄8), 1⁄2) NPT or BSPT (F)
14 ⁄ ), 3⁄8), 1⁄2) NPT or BSPT (F)
14
F
10
SPECIAL PURPOSE
Body
Gasket
DESIGN FEATURES
Spraying Systems Co. pioneered Their orifice inserts and cores Type SB SprayDry nozzles are
the development of specialized are available in a number of based on the same basic design
nozzles for the spray drying materials to meet the needs of configuration as type ST and SX Core
industry in the early ’40’s. Today any application. nozzles, except that the SB
we continue to offer an expanded nozzles are larger and are
These are: specially hardened
and updated choice of nozzle designed to provide higher capac-
and treated stainless steel Orifice
types and materials of construction. ities. With water the SB nozzles
(A-type), chrome carbide, and Insert
provide a capacity range from
SprayDry nozzles are designed a special carbide (Y-type).
55 to 570 gph (208 to 2157 l/h)
to provide good atomization with Chrome carbide provides the at 1000 psi (69 bar) pressure.
uniform spray distribution through- best corrosion resistance of the Depending on specific orifice
out their hollow cone pattern. carbides, and fair to good wear insert core combinations, the
These durable, precision nozzles resistance. Cap
spray angles at the orifice range
are specifically designed for from 34° to 109°.
Y-carbide provides both excellent
quick and easy assembly and corrosion resistance and excel- The orifice inserts and cores
disassembly. lent wear resistance. can be supplied in a choice of
SX and ST SprayDry nozzles specially treated hardened
provide a wide capacity range of stainless steel, or Y-carbide.
3.4 to 151 gph (12.8 to 572 l/h) at Nozzle body, cap, and core body
1000 psi (69 bar) and operate at are made of type 303 stainless
up to 7000 psi (483 bar). steel. The maximum recommend-
Their nozzle body, cap and core Body ed spraying pressure is 7000 psi
bodies are machined from solid (483 bar).
303 stainless steel bar stock Recommended operating temper- COMMON APPLICATIONS
(316SS is also available). ature is 300°F (150°C) with the ⓦ Non-fat dry milk
standard fiber gasket. Optional
Gasket
gasket materials are available ⓦ Whey
to allow operation at up to
1000°F (540°C). ⓦ Coffee
23412 QJ25655
F
11
SPECIAL PURPOSE
changing the ratio of compressed The AirJet Fogger’s tip has a rel- The Split-Eyelet version features
DESIGN FEATURES air to water. atively large clog-reducing orifice. a chemical-resistant, tight-fitting
The Threaded-type air-assisted Buna-N seal to ensure leak-free
Maintenance time is reduced The Split-Eyelet version provides
AirJet Fogger produces high performance.
because the built-in check valve, a faster way of installing the
quality, cost-efficient dry fog. spray tip, and internal strainer nozzle onto the liquid supply pipe, For additional details on the
Drops from the AirJet Fogger are quickly serviced by hand, as additional pipe fittings are not AirJet Fogger, ask for Bulletin 310A.
can average fifteen microns in without tools. The nozzle can required. Pipe cutting, threading,
size and less. use PVC pipe and low pressure and brazing are eliminated.
Drop size is adjustable to meet air tubing.
specific industrial needs by
PERFORMANCE DATA
Spray Tip gph/scfm FOR NO. 23412-1/4-20
AIRJET FOGGER (FLUID ORIFICE – .020) DIA.)
COMMON APPLICATIONS
(Brass)
ⓦ Plant propagation
Water Air Pressure in psi
Pressurizing Pres.
Orifice Pocket in psi 10 20 30 40 50 60 70 80 ⓦ Humidification
BODY
Both nozzles are constructed from 42° to 54°. Write for Data
DESIGN FEATURES of polypropylene for excellent Sheets 20570 and 37235.
The versatile Clip-Eyelet nozzle chemical and heat resistance up This threaded ball-type accepts SPRAY
THREADED
system features easy, no-tool to 180°F (82°C). TIP
a variety of nozzles with !\›", #\°" BALL
installation and removal. The
The Clip-Eyelet nozzle can and !\¤" NPT or BSPT (M) threads.
assembly is affixed to the header
handle pressures to 60 psi (4.1 “No-tool” tip and threaded ball
by a spring-grade stainless steel
bar), the threaded-type 125 psi removal is quick. The retaining
clamp. It fits 1), 11⁄4),11⁄2) or 2)
(8.6 bar). cap unscrews by hand, the RETAINING CAP
pipe with 9⁄16) (14.3 mm) holes. ball-tip or threaded ball is
For both nozzles, easy identi-
The new 37235 adjustable ball- removed from the nozzle body, RETAINING CAP
fication ball-type, flat and
type nozzle combines a and a new tip is inserted. BODY
hollowcone spray tips are color- O-RING
threaded pipe connection with coded by flow rate. The total angle
an adjustable direction spray tip of tip swivel adjustment varies
for application versatility.
MAX.
TOTAL
ADJUSTMENT
COMMON APPLICATIONS
ⓦ Metal washing and finishing
COLOR CODED
ⓦ Other low pressure applications BALL-TYPE SPRAY TIP
PERFORMANCE DATA
HOLLOW CONE SPRAY TIPS Clip-Eyelet Data Threaded Nozzle Data
SPRAY COLOR CODE TO
TIP & VANE CAPACITY IN GALLONS PER MINUTE CLIP-EYELET CLAMP Pipe Inlet Adjustable Ball Type
ANGLE
SUB-ASSEMBLY NO. BODY CAP ON Conn. NPT Nozzle No. for
5 10 15 20 30 40 60 7 20 60 or BSPT Threaded Version
NO. psi psi psi psi psi psi psi psi psi psi Med. Lt. 1)
20570-1-PP Gray Gray Pipe
CA15-30.1-PP 1.6 2.3 2.8 3.2 3.9 4.5 5.4 46° 49° 51° Q\‰"* 37235-Q\‰-PP
Med. Lt. 11⁄4 ) E\ˆ" 37235-E\ˆ-PP
CA25-30.1-PP 2.0 2.8 3.4 3.9 4.7 5.4 6.6 45° 47° 50° 20570-11⁄4-PP Gray Gray Pipe
Q\„" 37235-Q\„-PP
CA50-50.1-PP 3.5 5.0 6.1 7.0 8.6 9.9 12.1 38° 46° 48° Lt. 11⁄2)
20570-11⁄2-PPB Black Gray Pipe *Not recommended for capacities over
CA50-50.3-PP 3.5 5.0 6.1 7.0 8.5 9.8 11.9 75° 75° 76° 3 gpm (11 l/min) at 40 psi (3 bar).
Lt. 2)
20570-2-PPB Black Gray Pipe
CT2560-PP CT4060-PP CT5060-PP CT6560-PP CT8060-PP Blue 2.1 2.5 3.0 4.2 5.2 6.0 7.3
Optional Seal:
CT1570-PP CT2570-PP CT4070-PP CT5070-PP CT6570-PP CT8070-PP Red 2.5 2.9 3.5 4.9 6.1 7.0 8.6 To retrofit headers with 16.7 mm
CT15100-PP CT25100-PP CT40100-PP CT50100-PP CT65100-PP CT80100-PP Brown 3.5 4.2 5.0 7.1 8.6 10.0 12.2 diameter hole:
CP20579-BU SEAL (Buna-N)
Note: No. CT PLUG-PP Optional blank tip is used to replace CA- or CT- tip to shut-off spray nozzle. CP20579-VI SEAL (VITON)
BLOW-OFF NOZZLES
SPECIAL PURPOSE
DESIGN FEATURES
Model 727 WindJet blow-off operating pressure for each is Handles up to 170°F (77°C) at applications.
nozzles deliver high impact, flat 100 psi (7 bar). 100 psi (7 bar). Although not recommended for
streams of compressed air. The air stream of the ABS The 727-RY RYTON WindJet hand-held use, the Y727-AL
Made of ABS plastic, RYTON, or version is discharged through nozzle resists chemical corro- aluminum WindJet nozzle offers
aluminum, they're designed for sixteen orifices recessed sion and temperatures to 300°F exceptional durability in severe
cooling, drying and blow-off between protective ribs. This (149°C) at 40 psi (3 bar). It too cyclic applications. The alu-
applications in conveyor, CIP keeps dead-end pressure below meets OSHA standards for minum version operates at up to
and hand-held set-ups. Side-by- OSHA requirements for manual noise and dead-end pressure, 400°F (200°C) at 100 psi (7 bar).
side positioning provides an use. Operating noise levels are and can be used in hand-held Write for Data Sheet Y727-AL.
effective air curtain. Maximum under OSHA standard 1910.95.
WindJet nozzle used with trigger valve spray gun provides excellent hand
control.
DIMENSIONS 30 SCFM
AIR FLOW
1132
(l/min)
20 SCFM
1132
(l/min)
10 SCFM
1132
(l/min)
Connection
COMMON APPLICATIONS ORDERING INFORMATION
Nozzle
A B C D ⓦ Parts cleaning/drying Specify: AA727-1/4-15
Type
(for ABS plastic)
727 3O\ŒÁ" 1U\ˆ" 1EO\Á‰" Q\‰" ⓦ Parts cooling
AA727-1/4-RY-15
727-RY 3O\ŒÁ" 1U\ˆ" 1EO\Á‰" Q\‰" ⓦ Moving of materials (for RYTON plastic)
Y727-AL 3QU\´„" 2" – Q\‰" Y727-AL
(for aluminum)
Self-Cleaning
Manifold System
THREE VERSIONS AVAILABLE
F AUTOMATIC
BRUSH VERSION
14
SPECIAL PURPOSE
MANUAL
BRUSH VERSION
Designed for
Accuracy
The manifold is fitted with self-
aligning disc-type spray nozzles,
each secured into perfect
alignment by a lock ring. A wide
range of flow rates are available
in 0°, 30° and 60° spray angles.
Nozzle spacing is determined by
the spray angle and distance to
the impact area. Each manifold
is custom designed to meet your
specific requirements.
PERFORMANCE DATA
Designed for
Flexibility
Designed for
Retrofitting
Spray Angle Nozzle
at 60 psi (4 bar) Size No.
Orifice
Diam.
in. 40 psi
CAPACITY in gallons per minute
60 psi 100 psi 250 psi 750 psi
F
You can custom order just the The new manifold system retrofits 00004 0.016 0.04 0.05 0.06 0.10 0.17
15
header system with disc-type most existing header systems. 00007 0.024 0.07 0.09 0.11 0.18 0.30
nozzles without a brush assembly For example, the flanged, multi- 00009 0.028 0.09 0.11 0.14 0.23 0.39
SPECIAL PURPOSE
if you’re looking for a quality position flush-out valve is easily 0001 0.031 0.13 0.16 0.21 0.33 0.56
0° 0002 0.039 0.23 0.28 0.36 0.58 1.00
header replacement. And later, positioned in 90° increments for 0003 0.047 0.33 0.40 0.52 0.83 1.43
you can add the self-cleaning convenient hose connection. It is 0004 0.059 0.43 0.53 0.68 1.08 1.86
brush-type assembly should the not a welded housing. 0008 0.079 0.79 0.97 1.25 1.98 3.42
need arise. 0012 0.099 1.24 1.52 1.96 3.10 5.37
Manifold diameters from 11⁄2) to 0020 0.118 1.98 2.43 3.13 4.95 8.57
The brushless type manifold can 6) are available in lengths as 3002 0.039 0.23 0.28 0.36 0.58 1.00
also be equipped with the model required, and will support 3003 0.047 0.33 0.40 0.52 0.83 1.43
20235 and 20210 self-cleaning pressures to 750 psi (52 bar). 3004 0.059 0.43 0.53 0.68 1.08 1.86
nozzles (see page F7). Elbows, flanges, hose adapters, 3006 0.071 0.61 0.75 0.96 1.53 2.64
30° 3008 0.079 0.79 0.97 1.25 1.98 3.42
and a variety of mounting options 3010 0.089 1.02 1.25 1.61 2.55 4.42
are available in many sizes… 3012 0.099 1.24 1.52 1.96 3.10 5.37
and may be specified for the inlet 3016 0.110 1.61 1.97 2.55 4.03 6.97
as well as the outlet connection. 3020 0.118 1.98 2.43 3.13 4.95 8.57
6002 0.039 0.23 0.28 0.36 0.58 1.00
Ask your local sales represen- 6003 0.047 0.33 0.40 0.52 0.83 1.43
tative for options. 6004 0.059 0.43 0.53 0.68 1.08 1.86
6006 0.071 0.61 0.75 0.96 1.53 2.64
6008 0.079 0.79 0.97 1.25 1.98 3.42
6010 0.089 1.02 1.25 1.61 2.55 4.42
6012 0.099 1.24 1.52 1.96 3.10 5.37
6016 0.110 1.61 1.97 2.55 4.03 6.97
60° 6020 0.118 1.98 2.43 3.13 4.95 8.57
6025 0.138 2.56 3.14 4.05 6.40 11.09
6031 0.157 3.14 3.85 4.96 7.85 13.60
6040 0.177 4.03 4.94 6.37 10.08 17.45
6049 0.197 4.91 6.01 7.76 12.28 21.26
6078 0.236 7.85 9.62 12.41 19.63 33.99
6099 0.276 9.88 12.10 15.62 24.70 42.78
60124 0.315 12.41 15.20 19.62 31.03 53.74
Minimum Water Pressure – 1.5 bar
ⓦ Parts washing
Clogging-type particles are effectively flushed out of the system, as shown in this ⓦ Other manifold operations
lab demonstration. where clogging is a problem
Moisturizing/coating header
VARIABLE SPRAY ATOMIZATION
AND DISTRIBUTION CONTROL
F
16
SPECIAL PURPOSE
DESIGN FEATURES
Spraying Systems’ moisturizing The clean-out needle in the Choose from seven
header can be fine-tuned for VAU nozzles is activated when set-ups
accurate, uniform spray liquid flow is shut-off, virtually
The VAU nozzles can be fitted
distribution across the contact eliminating clogged orifices.
with any of seven different spray
area. This, and an additonal
set-ups, providing flow rates
inlet/outlet port for recirculating
The pressures for the header from 0.74 gph (2.8 l/h) to 47 gph
flow, make the header ideal for
atomizing air, fan air, and liquid (179 l/h). All inlet connections
spraying viscous liquids as well.
feed lines are adjusted are !\°" NPT or BSPT (F). Wetted
independently of each other. A protective stainless steel parts are made of stainless steel
This allows exceptional control cabinet houses the nozzles, air with a TEFLON packing cup and
of the drop sizes and spray and liquid lines. Hinged covers TEFLON-coated VITON Quad
pattern. provide easy access to the rings. Automatic “on/off”
interior head assembly. An operation up to 180 cycles per
optional mounting assembly minute. Minimum of 35 psi
permits rotation of the header for (2.4 bar) air pressure for
additional access convenience. operation of air cylinder.
Note: VAU nozzles are available for other
applications and can be ordered
separately. (See page D24)
SPECIAL PURPOSE
DESIGN FEATURES
Available Spray Set-ups
The chart below gives the data
sheet numbers for each of the
seven available set-ups. These
data sheets are available through
your local Spraying Systems Co.
representative.
Simple interior
design
ⓦ Moisturizing
Fan Air
ORDERING INFORMATION
For ordering information contact your
local sales engineering representative.
Flowback
NOZZLE LANCES
FOR GAS CONDITIONING
DESIGN FEATURES
Spraying Systems Co. flowback head configurations with standard atomization with infinitely For example, as the gas volume
lance design provides efficient bolt-on or quick release flange- variable flow adjustment through increases or decreases, the reg-
cooling and conditioning of hot mounted tube assemblies. The the 10 to 1 turn down ratio. ulating valve is used to adjust
gases by delivering consistently low cost two-piece nozzle design the flow rate of the nozzle to meet
A valve on the return line or
fine atomization of liquids. Drop requires no special tools allowing the changing process require-
flowback side of the lance allows
size is maintained regardless of easy removal for cleaning or ments. The unused liquid can be
manual adjustment of the flow
changes in flow rate requirements. replacement. returned to the reservoir for reuse
rate. Or, if required, by adding
This precise control of flow to help lower operating costs.
The flowback nozzle produces a process control package, a
enhances evaporation and a hollow cone spray pattern. motorized valve positioner can
improves system efficiency. Based on a constant inlet be utilized to offer a flexible
Flowback lances are available pressure, the flowback design response to changes in flow
in single or multiple orifice spray provides consistently fine requirements.
LANCE MOUNTING/
PROTECTIVE TUBE
COMMON APPLICATIONS ORDERING INFORMATION
Gas cooling for cement, steel, Contact your local Spraying
and aluminum plants. Aqueous Systems Co. office for order infor-
Straight or 45° angle nozzle Each lance can be equipped with ammonia injection for pollution mation regarding this product.
lances are available with single or a quick release flange and control or any place where fine
multiple orifice heads…in lengths mounting/protective tube or atomization and precise fluid
required for custom installation. special connections. control is required.
Fluidline
Accessories
section G
INDEX
Split-Eyelet Connectors........................................G2
Adjustable Ball Fittings.........................................G3
Valves
Check, Plug and Rollover ....................................G4
Shut-Off ................................................................G5
Throttling and Pressure Relief/Regulating...........G6
Solenoid ...............................................................G7
Pressure Regulators and Gauges
for Air and Liquid ...........................................G8, G9
Line Filters for Air .................................................G10
Liquid Strainers
Low-Medium Pressure
Up to 6) Connection .............................G11, G12
Low-Medium Pressure
Up to 21⁄ ) Connection..................G13, G14, G15
2
High Pressure
Up to 1) Connection ......................................G16
Swivel Connectors ..............................................G16
Quick Couplers ....................................................G16
Tank Mixing Eductor ...........................................G16
Split-Eyelet
CONNECTORS
Outlet Conn.: 1⁄8), 1⁄4) NPT or BSPT (F) 1⁄8), 1⁄4), 3⁄8), 1⁄2) NPT or BSPT (F) 1⁄4), 3⁄8), 1⁄2), 3⁄4),1" NPT or BSPT (F) 1⁄8), 1⁄4) NPT or BSPT (F)
G
2
FLUIDLINE ACCESSORIES
DESIGN FEATURES
Split-Eyelet connectors provide a eliminating cutting, threading, within the flange if nozzles must
fast and economical way of and brazing operations. It can be removed or installed after the
installing nozzles and other also be used to reinstall nozzles connector is in place. The body
fittings in piping systems. Simply in thread stripped manifolds. inlet extends high into the pipe to
drill the specified diameter hole, retard entry of sediment and
Connector bodies are machined
slip the split eyelet connector minimize clogging. The Buna-N
from bar stock with a choice of
around the pipe and tighten the clamp gasket is resistant to most
outlet connection sizes. The
clamp bolts to lock in place. This materials, and provides a leak-
design prevents body rotation
unique design reduces costs by proof seal.
G
3
FLUIDLINE ACCESSORIES
DESIGN FEATURES
45° TOTAL Adjustable ball fittings provide to minimize clogging and smooth pressure rating is 300 psi (21 bar).
INCLUDED
ANGLE OF adjustable positioning of spray finished sealing surfaces to Nozzle removal for cleaning and
ADJUSTMENT nozzles for more exact control assure leakproof connections. readjustment is quick and simple.
IN ANY DIRECTION
of spray direction. They permit The machined-type ball fitting Cast-type fittings feature locking
accurate pipe alignment and features a lock ring that holds screws that hold the nozzle in
convenient nozzle positioning the nozzle in position when position when jarred or subjected
without disturbing pipe jarred or subjected to vibration. to vibration. They are rated for
connections. Adjustable ball The fitting has a relatively small pressures up to 125 psi (9 bar).
fittings are available in a wide diameter for applications requir-
range of pipe connections. They ing a compact size. Its maximum
feature large internal passages
1⁄2M
1⁄2F
1⁄2F
36275-1⁄2 x 1⁄2 Brass
27⁄32 121⁄32 10 no material code = Brass 1 x 1 - SS
36275-1⁄2 x 1⁄2-SS St. Steel
SS = 303 Stainless Steel
3⁄4M 3⁄4F 36275-3⁄4 x 3⁄4 Brass Inlet Outlet Material
3⁄4M 3⁄4F 213⁄32 129⁄32 17 Connection Connection Code
36275-3⁄4 x 3⁄4-SS St. Steel Size Size
Cast Type
Call for availability of reducing sizes.
no material code = Brass
I = Cast Iron
INLET SS = 303 Stainless Steel and
CONN. Cast 316 Stainless Steel
OUTLET
INLET CONN. OUTLET CONN. CONN.
NPT (M) OR NPT (F) OR CAST FLANGE
BSPT (M) BSPT (F)
Valves
CHECK PLUG ROLLOVER
AB BB 23220 23830
ball type ball type ⁄ x ⁄
23220- 1 4F 1 4F
1⁄8"-1⁄4" NPT or BSPT 1⁄4" NPT or BSPT
23220-1⁄8F x 1⁄8F
Write for Data Sheet 15664. Write for Data Sheet 3936.
G 23830
4 (with swivel
23220-1⁄4M x T connection)
FLUIDLINE ACCESSORIES
23220-1⁄4F x T 23830-1⁄4M
10742A 12328 (with male
diaphragm type diaphragm type thread inlet)
14
⁄ " NPT or BSPT 12
⁄ "-3⁄4" NPT or BSPT
23220-1⁄4M x 1⁄4F
23830-1⁄4F
(with female
thread inlet)
23220-1⁄4F x 1⁄4M
DESIGN FEATURES DESIGN FEATURES
Check valves are installed with (8 l/min) for AB and .5 gpm (2 This useful accessory permits
spray nozzles to provide positive l/min) for the BB. quick switch-over between two
drip-free shut-off, and to maintain nozzles. Liquid flow is dispersed
10742A and 12328 series
line pressure during on-and-off spring-loaded diaphragm type DESIGN FEATURES from one outlet, with a standby
spraying cycles. nozzle in the second outlet. To
check valves offer the important The versatile in-line plug valve switch nozzles, flow must be shut-
AB and BB series spring-loaded advantage of line flows without features a brass body with a off before the second or standby
ball type check valves are avail- pressure drop through the valve. one-piece CELCON plug/handle. nozzle can be rotated 180° into
able with brass or stainless steel They have an opening pressure Shut-off is quick and easy. A the liquid outlet portion. Ideal for
bodies and a stainless steel ball of 7 psi (0.5 bar) and are not simple 90° rotation of the lever systems that need frequent
and spring. They operate at affected by vibrations or other actuates the on/off position. The cleaning, or where two different
pressures up to 125 psi (9 bar) external disturbances. 10742 valve can also be actuated by spray patterns may be used in the
and feature a choice of 5, 10, or series brass check valves offer using a hex allen wrench in the system. Three inlet connections
20 psi rated (0.35, 0.7 or 1.4 bar) !\›" NPT or BSPT connections hex opening at the tip of the are available; a swivel connection
springs. AB series check valves and flow rates to 2 gpm (8 l/min) lever. Several models are avail- that permits positioning of the
are supplied with a !\°" or !\›" NPT while 12328 series valves offer able to accommodate various spray direction or fixed !\›" male or
or BSPT male inlet and female !\¤" or #\›" NPT or BSPT connec- thread combinations…at maxi- female inlet connections. Write for
outlet. BB series check valves tions and flow rates to 15 gpm mum operating pressure of 400 Data Sheet 23830-1.
are supplied with a !\›" NPT or (57 l/min). Materials are nylon psi (27 bar). Write for Data
BSPT male inlet and male outlet. with CELCON bonnet. Sheet 23220.
The maximum flow rate is 2 gpm
G
5
FLUIDLINE ACCESSORIES
and disassembly and offer excel- Model AA344M-2-PP provides
DESIGN FEATURES lent corrosion resistance. All positive on-off control. Model
DESIGN FEATURES
AA344M ball valves feature a wetted parts are glass-reinforced AA344M-3-PP offers no shut-off Type 20900 UniJet ball valves
heavy-duty reinforced nylon polypropylene, TEFLON, and diverts flow to either outlet. provide on-off control for individ-
body with a polypropylene ball polypropylene or VITON. ual nozzles. They feature a !\›"
The 346M-PP manually operated
and TEFLON seals. They provide NPT or BSPT (male or female)
AA343M-PP ball valves operate ball valves offer pipe connections
a simple method of controlling inlet connection. Outlet
at pressures up to 150 psi (10 bar). of 1!\›" or 1!\¤" NPT or BSPT
liquid flows. The AA344M installs connections are !!\⁄fl"-16 male
MODEL AA343M-2-PP provides (female), and have a maximum
quickly and is designed for easy thread for use with UniJet tip
complete shut-off to full flow with pressure rating of 125 psi (8 bar).
maintenance. Special retainers and adapters.
just a quarter turn of the handle. Their special 3-piece construction
3-piece construction allows Model AA343M-3-PP diverts makes them easy to service Brass body construction with
removal of the valve body with- flow to either outlet and offers no without disturbing pipe connec- stainless steel ball, pressures up
out disturbing pipe connections. shut-off. Write for Data Sheets tions. Their polypropylene con- to 400 psi (28 bar). Write for
Model AA344M-2 provides 343M-2-PP and 343M-3-PP struction offers excellent corrosion Data Sheet 20900.
positive on-off control with a resistance and durability.
The AA344M-PP manually
!\› turn of the handle. Model operated ball valves have a The AA346M-2-PP provides for
AA344M-3 diverts flow to either maximum operating pressure of shut-off to full flow with a !\› turn
outlet and does not shut off. 125 psi (8 bar). Their full-port of the handle. The AA346-3-PP
AA344M ball valves operate at design provides unrestricted flow model does not shut off but
pressures up to 300 psi (21 bar). with minimal pressure drop diverts the flow to either outlet.
Their full-port design provides when fully open. Write for Data Sheets 346M-2-PP
unrestricted flow with minimal and 346M-3-PP.
The AA344M-PP valves offer
pressure drop when wide open. excellent corrosion resistance
Write for Data Sheets 344M-2 Inlet & Outlet Conn.
and easy installation. Valve body Model No. NPT or BSPT (F)
and 344M-3. removal is simple because of AA344M-PP-2-3/4 E\‰"
AA343M-PP ball valves easily special 3-piece construction, with- AA344M-PP-3-3/4 E\‰"
install in systems. They are out disturbing pipe connections. AA344M-PP-2-1 1"
designed for ease of assembly Write for Data Sheet 344M-2-PP. AA344M-PP-3-1 1"
Inlet & Outlet Conn. Inlet & Outlet Conn. Inlet & Outlet Conn. Ball Valve No. Connections
Model No. NPT or BSPT (F) Model No. NPT or BSPT (F) Model No. NPT or BSPT (F)
20900-1⁄4M x T Q\‰" NPT (M) x
AA344M-2-3/4 E\‰" AA343M-PP-2-3/8 E\ˆ" AA346M-PP-2-11⁄4 1Q\‰" QQ\ŒÁ" - 16 (M)
AA344M-2-1 1" AA343M-PP-3-3/8 E\ˆ" AA346M-PP-3-11⁄4 1Q\‰" 20900-1⁄4F x T Q\‰" NPT (F) x
AA344M-3-3/4 E\‰" AA343M-PP-2-1/2 Q\„" AA346M-PP-2-11⁄2 1Q\„" QQ\ŒÁ" - 16 (M)
AA344M-3-1 1" AA343M-PP-3-1/2 Q\„" AA346M-PP-3-11⁄2 1Q\„"
G
6
FLUIDLINE ACCESSORIES
Sheets 23520-!\¤ and 23520-#\›. with the liquid and provides 9840-1⁄2-DI 1⁄2
Ductile Iron
Up to 300 psi 8 1⁄2) 2
responsive, chatter-free operation. 9840-3⁄4-DI 3⁄4 and Aluminum
Model 23120-PP pressure relief
These valves also feature a port
valve is constructed of polypro- 6815-1⁄2-50 Up to 50 psi
for pressure gauge installation.
pylene with a nylon adjusting cap 6815-1⁄2-300 Up to 300 psi Brass
Write for Data Sheet 8460-I.
for excellent chemical resistance. 6815-1⁄2-700 300 to 700 psi 12
⁄ 6 5⁄8) 11⁄4
The valve is adjustable by hand Model 9840 diaphragm relief Brass and
to maintain control of line pressure valves offer a design similar to 6815-1⁄2-HSS-1200 700 to 1200 psi Hardened S.S.
at any pressure within the valve Model 8460. Construction of the
6815-3⁄4-50 Up to 50 psi
operating range. The selected inlet body is of brass, aluminum,
6815-3⁄4-300 Up to 300 psi Brass
pressure setting is firmly held in or ductile iron. Write for Data
6815-3⁄4-700 300 to 700 psi 34
⁄ 6 5⁄8) 11⁄4
place by the locknut. Sheet 9840.
Brass and
The Model 23120-PP offers !\¤) Model 6815 piston type pressure 6815-3⁄4-HSS-1200 700 to 1200 psi Hardened S.S.
or #\›) NPT or BSPT (M) inlet relief valves are available in !\¤) 6815- ⁄ -AL-50
12
Up to 50 psi
and (F) outlet connections. The or #\›) pipe sizes with operating 6815-1⁄2-AL-300 Up to 300 psi 12
⁄ Aluminum 6 5⁄8) 12
⁄
valve can handle pressures up pressures to 1200 psi (85 bar). 6815-1⁄2-AL-700 300 to 700 psi
to 150 psi (10.4 bar). It comes An extra large valve passage
6815-3⁄4-AL-50 Up to 50 psi
with a !\›) NPT or BSPT (F) port provides full flow through the
6815-3⁄4-AL-300 Up to 300 psi 34
⁄ Aluminum 6 5⁄8) 12
⁄
for pressure gauge connection. valve passage with minimum
6815-3⁄4-AL-700 300 to 700 psi
Write for Data Sheet 23120. pressure loss. A free floating seat
design improves overall speed 110-1⁄4-300 Up to 300 psi
and sensitivity of the valve action. 110-1⁄4-700 300 to 700 psi 14
⁄ Brass 4) .4
Write for Data Sheet 6815. 110-1⁄4-1000 700 to 1000 psi
Model 110 pressure relief valves 110-3⁄8-300 Up to 300 psi
offer a piston type design in a 110-3⁄8-700 300 to 700 psi 38
⁄ Brass 4) .4
choice of pipe connection sizes, 110-3⁄8-1000 700 to 1000 psi
with operating pressures up to 110-1 1 7 1⁄4) 2 3⁄4
1000 psi (70 bar). An extra large 110-11⁄4 Up to 150 psi 11⁄4 Brass 7 1⁄2) 3
valve passage provides full flow
110-11⁄2 11⁄2 7 3⁄4) 4
with minimum pressure loss. A
110-1-AL 1 7 1⁄4) 11⁄4
guide vane type seat stabilizes
110-11⁄4-AL Up to 150 psi 11⁄4 Aluminum 7 1⁄2) 11⁄2
flow through the valve to reduce
110-11⁄2-AL 11⁄2 7 3⁄4) 13⁄4
chatter. The valve bonnet is
easily removed for service 110-1-DI 1 7 1⁄4) 21⁄2
Ductile
without disturbing the fluid line 110-11⁄4-DI Up to 150 psi 11⁄4 7 1⁄2) 23⁄4
Iron
connections. Write for Data 110-11⁄2-DI 11⁄2 7 3⁄4) 3 1⁄2
Sheets 11826, 13154, 14706,
14706-2, and 19697.
Valves
SOLENOID
2-WAY 3-WAY
See charts below for See charts below for
specific model no. specific model no.
G
7
FLUIDLINE ACCESSORIES
DESIGN FEATURES
Spraying Systems’ solenoid The coils are rated for dual pilot orifice helps eliminate The solenoid valves can be
valves are designed for automat- frequency operation suitable for premature leaking and increases mounted in any position and are
ically operated systems requiring international use. The coil is service life. Kel-F or VITON direct pipe mounted. Additional
on-off flow. They are normally encapsulated in a molding seals are molded into stainless bottom mounting is provided on
closed and are designed to give compound to resist high steel floating bottom plungers. models 11438-20, -21, and -22
dependable service in both air humidity and fungus growth. The floating plungers automat- by two 10-24 tapped holes.
and liquid lines within the ically compensate for vibration,
The enclosure can be rotated 360° The valve action within these
temperature ranges of 40°F to shock, wear, and deformation,
and is electrostatically powder- models is either diaphragm, pilot
165°F (5°C to 75°C). providing a bubble-tight seal.
coated for durability. It includes a operated diaphragm, or direct
Ten watt, class “F” coils are for 1⁄2) NPT connection. Buna-N material is used with acting poppet.
continuous duty, and are UL and diaphragm valves.
The solenoid valve bodies are For additional solenoid flow or
CSA approved. Ambient operating
available in stainless steel or capacity information, request Data
temperatures range from 15°F to
brass as shown below. For high Sheet 11438-SOLENOID (1), (2).
122°F (-10°C to 50°C).
velocity flow, a stainless steel
STANDARD ASSEMBLY
Type Port Max. Type of Model
Model Body Seal Valve Orifice **Cv W X Y Z
of Conn. Pressure Valve Number
Number Material Material Action Size Factor
Valve NPT (F) psi
11438-20
15⁄8) 229⁄32) 115⁄16) ⁄ )
11 32
11438-20 ⁄)
14
Stainless VITON Direct 60* ⁄ )
3 16
.50 11438-21
Steel Acting
11438-21 ⁄)
14
Kel-F Poppet 205* ⁄)
18
.28 11438-22 131⁄32) 39⁄16) 219⁄32) ⁄ )
19 32
Two
Two 11438-22 ⁄)
38 ⁄ )
7 16
2.5 Way
Way 150* 11438-23 221⁄32) 413⁄32) 313⁄32) ⁄ )
17 32
11438-23 ⁄)
12 Forged Pilot- ⁄)
58
4.0
or Cast Buna-N Operated
11438-24
11438-24 ⁄)
34
Brass Diaph. ⁄)
34
7.8 315⁄16) 43⁄4) 323⁄32) ⁄)
78
230 11438-25
11438-25 1) 1) 13
11438-30 19⁄16) 33⁄4) 23⁄4) 11⁄8)
11438-30 ⁄)
14 Forged VITON Poppet 100 ⁄ )
3 32
.25/.38 Three
Three or Cast Way
Way 11438-31 33⁄32) 55⁄8) 35⁄32) 11⁄16)
11438-31 ⁄)
12 Brass Buna-N Diaph. 150 ⁄)
12
3.6
* For maximum pressures for coils “C” and “D”, write for Data Sheet 11438-SOLENOID (1).
** For use of Cv factor, write for Data Sheet 11438-SOLENOID (2).
Pressure Regulators
FOR AIR
11438-**
** See charts below for
specific model no.
G
8
FLUIDLINE ACCESSORIES
DESIGN FEATURES
These air pressure regulators non-relieving style requires bar) and regulate pressure from
are diaphragm type regulators some other means of relief to 5 to 125 psi (0.3 to 8.5 bar).
with a balanced valve design. reduce trapped pressure. Design operating temperature
They come in two styles: The materials of construction range maximums are 0° to 175°F
relieving and non-relieving. The for the bodies and bonnets are (-15° to 80°C) with dewpoint
relieving style automatically diecast aluminum, zinc or less than air temperature below
relieves excessive pressure in a stainless steel. The stainless 35°F (2°C).
regulated air line, and even steel versions meet NACE
when the line is dead-ended it Gauges are supplied separately.
standard MR-01-75 for corrosion
allows the regulated line Note: Model 11438-45S has the
resistance.
pressure to be reduced with the same flow limitations as a stan-
regulator adjusting knob. The They can be used with supply dard !\°" NPT port regulating valve.
line pressures up to 300 psi (20
Non-Relieving Type
Liquid pressure Air filter
regulator with gauge
Air filter
Strainer-liquid
Spray
Nozzle
PERFORMANCE DATA
2-way valve for control RELIEVING TYPE
Atomizing air line of atomizing air line
1⁄4) pipe (optional) Main Gauge
Regulator Body
Ports Ports
Order Number Material
NPT (F) NPT (F)
11438-45 ⁄)
14 ⁄)
14 Zinc
DIMENSIONS 11438-45S ⁄)
14 ⁄)
18 316 Stainless Steel
3⁄8) 1⁄4)
11438-46 Zinc
1⁄2) 1⁄4)
DIMENSIONS 11438-47 Zinc
Model 11438-47S 1⁄2) 1⁄4) 316 Stainless Steel
No. E 3⁄4) 1⁄4)
A B C D 11438-48 Aluminum
Dia. 1⁄4)
11438-49 1) Aluminum
11438-35
11438-36
11438-45 3QQ\ŒÁ" 1U\ŒÁ" 5Q\ˆ" 23⁄4" 2" NON-RELIEVING TYPE
11438-46
Main Gauge
11438-37 Regulator Body
11438-47 4E\ˆ" 1Q\„" 5U\ˆ" 3Q\„" 2Q\‰" Ports Ports
Order Number Material
NPT (F) NPT (F)
11438-38
11438-39 11438-35 ⁄)
14 ⁄)
14 Zinc
4Q\„" 2E\ˆ" 6U\ˆ" 4Q\‰" 2Q\‰"
11438-48 11438-36 ⁄)
38 ⁄)
14 Zinc
11438-49 11438-37 1⁄2) ⁄)
14 Zinc
11438-45S 3⁄4) 1⁄4)
2E\ˆ" E\ˆ" 2E\‰" 1Q\„" 1Q\„" 11438-38 Aluminum
1⁄4)
11438-47S 6E\ŒÁ" 1T\ˆ" 7QE\ŒÁ" 3Q\„" 2Q\‰" 11438-39 1) Aluminum
Pressure Gauges Pressure Regulators
FOR LIQUID
FLUIDLINE ACCESSORIES
to 125 psi (0.3 to 8.5 bar).
Design operating temperature
range maximums are 35°F to
175°F (2° to 80°C) for the stain-
DESIGN FEATURES DESIGN FEATURES DESIGN FEATURES less steel versions and 35°F to
The model 26385 pressure Models 26383- ⁄ - - and 26383-
18 These liquid pressure regulators 200°F (2° to 93°C) for the others.
gauge offers stable, accurate 1⁄4 - - have the same basic are non-relieving diaphragm type Gauges are supplied separately.
needle readings up to the rated mechanical design as model regulators.
maximum pressure. Eleven 26385 but feature a center back They are made with bodies of
bottom inlet models are available connection with NPT pipe brass, brass-plated zinc, or
from maximum 60 psi to maxi- connections in !\°" or !\›" sizes. stainless steel. The stainless steel
mum 3000 psi (4.2 to 207 bar). These gauges are housed in a versions meet NACE standard
2" diameter ABS case.
The gauge features a patented MR-01-75 for corrosion resistance.
spring suspended movement,
protected by a corrosion and
impact-resistant 2!\¤" diameter
ABS housing with polycarbonate
window. All wetted parts are brass, DIMENSIONS
NPT
with a combination brass/bronze Model Pressure
(M) DIMENSIONS
No. Range psi Model
connection and bourdon tube. Conn. E
No. A B C D
Features !\›" NPT (M) bottom 26383-Q\ˆ-60 Q\ˆ" 0-60 Dia.
inlet. Grade B accuracy within 26383-Q\‰-60 Q\‰" 0-60 11438-250 41⁄4) 11⁄2) 53⁄4) 23⁄4) 25⁄16)
11438-251
± 2% in the middle 50% of the 26383-Q\ˆ-100 Q\ˆ" 0-100
11438-252 45⁄16) 119⁄32) 515⁄16) 35⁄16) 27⁄16)
scale, with 3% accuracy in the 26383-Q\‰-100 Q\‰" 0-100 11438-253 7⁄)
78
1⁄)
58
9⁄)
12
5) 47⁄8)
high and low ends of the scale. 11438-254
26383-Q\ˆ-160 Q\ˆ" 0-160
Includes dual scales in psi and 11438-250S 23⁄8) 3⁄8)
23⁄4) 11⁄2) 11⁄2)
bar. 26383-Q\‰-160 Q\‰" 0-160
11438-252S 63⁄16) 15⁄8) 713⁄16) 31⁄2) 21⁄4)
Optimum
Model Max.
Operating
No. psi
Range (psi) PERFORMANCE DATA
26385-60 60 15 - 45
Main Gauge
26385-100 100 25 - 75 Regulator Body
Ports Ports
Order Number Material
NPT (F) NPT (F)
26385-160 160 40 - 120
11438-250 ⁄)
14 ⁄)
14 Brass
26385-200 200 50 - 150 11438-250S ⁄)
14 ⁄)
18 316 Stainless Steel
3⁄8) 1⁄4)
26385-300 300 75 - 225 11438-251 Brass
1⁄2) 1⁄4)
11438-252 Brass
26385-400 400 100 - 300 11438-252S 1⁄2) 1⁄4) 316 Stainless Steel
3⁄4) 1⁄8)
26385-600 600 150 - 450 11438-253 Brass
1⁄8)
11438-254 1) Brass
26385-1000 1000 250 - 750
AIR
26385-1500 1500 375 - 1125 AIR PRESSURE FILTER
REGULATOR
26385-2000 2000 600 - 1500 WITH GAUGE
AIR
LINE
26385-3000 3000 750 - 2250
LIQUID
LINE
3-WAY
SOLENIOD
AIR VALVE TW LINE
STRAINER
AutoJet
SPRAY NOZZLE
Hanger Rod LIQUID PRESSURE
REGULATOR
WITH GAUGE
Line Filters
FOR AIR
11438-**
** See charts below for
specific model no.
G
10
FLUIDLINE ACCESSORIES
DESIGN FEATURES
These Air Line Filters remove synthetics. Models 11438-19, -4, at the bottom of the bowl for
liquid and solid contaminants and -5 have screw-on metal bowls manual drainage when needed,
from air lines to protect equipment with sight glasses making the and requires that the filter be
from corrosion and excessive liquid clearly visible. All bowls easily accessible.
wear. Models 11438-16, -17, -1, have a 50 micron filter element The Automatic Drain Air Filter
-2, and -3 have screw-on trans- and are designed to operate at model features a float-operated
parent polycarbonate plastic a maximum pressure of 150 psi mechanism at the bottom of the
bowls with bowl guards for (10 bar) and a maximum bowl that automatically expels
breakage resistance. They should temperature of 125°F (50°C). liquid when it is over a critical
not be used in systems where The Manual Drain Air Filter level. It is specially designed for
the air compressors are model features a simple petcock use in inaccessible locations.
lubricated with fire-resistant
DIMENSIONS
AUTOMATIC DRAIN FILTER DIMENSIONS Approx. flow at
100 psig with
Model NPT E
A B C D 5 psi press. drop
No. Conn. Dia. through filter
11438-16 Q\‰" 7" QQ\ŒÁ" 6T\ŒÁ" 3T\ˆ" 3" 50 scfm
11438-17 Q\„" 7" QQ\ŒÁ" 6T\ŒÁ" 3WO\´„" 3" 150 scfm
11438-19 1" 11Q\ˆ" 1Q\ŒÁ" 10Q\ŒÁ" 4E\‰" 4O\ŒÁ" 445 scfm
TW TWC TWF
removable bottom cap bottom plug for flush cleaning bottom plug for flush cleaning
1⁄4" -21⁄2" NPT or BSPT (F) 21⁄2" -4" NPT or BSPT (F) 3" - 6" flange connection
G
11
FLUIDLINE ACCESSORIES
16106 9830
bottom plug for flush cleaning removable bottom cap/300 psi (21 bar)
11⁄2" -21⁄2" NPT or BSPT (F) 3⁄4" -1" NPT or BSPT (F)
Page G9
Page G2
Efficient Continuous
Flow Assembly Page G11
For systems requiring contin-
uous operation, install strainers Page G5
in parallel. Use one side of line Flush Line
(optional)
while other is being cleaned.
Liquid Strainers
LOW-MEDIUM PRESSURE (CONT.)
UP TO 6"
1.3
Area
12.4
12 ⁄ TW
14 Q\‰"
• 50 SS 2.5
.8 7.4
2!\„" 2E\‰" 1Q\ˆ
• 80 .8 7.7
• 100 .8 7.4
FLUIDLINE ACCESSORIES
• 16 2.9 15.4
⁄ TW
38 E\ˆ"
• • 50 SS 5.8
1.8 9.2
3Q\‰" 3Q\„" 2Q\‰
• • 80 1.8 9.6
• • 100 1.8 9.2
• 16 2.9 9.7
⁄ TW
12 Q\„"
• • 50 SS 5.8
1.8 5.8
3Q\‰" 3Q\„" 2
• • 80 1.8 6.0 TWC
• • 100 1.8 5.8
• 16 8.1 15.2
⁄ TW
34 E\‰"
• • 50 SS 16
4.8 9.1
5Q\‰" 5T\ˆ" 5Q\ˆ
• • 80 5.0 9.4
• • 100 4.8 9.1
• 16 8.1 9.4
1 TW 1"
• • 50 SS 16
4.8 5.6
5Q\‰" 5T\ˆ" 4E\‰
• • 80 5.0 5.8
• • 100 4.8 5.6
• 16 15.5 10.4
11⁄4 TW 1Q\‰"
• • 50 SS 31
9.3 6.2
7Q\‰" 6E\‰" 13Q\„
• • 80 9.6 6.4
• • 100 9.3 6.2 TWF
• 16 15.5 7.6
11⁄2 TW 1Q\„"
• • 50 SS 31
9.3 4.6
7Q\‰" 6E\‰" 13Q\ˆ
• • 80 9.6 4.7
• • 100 9.3 4.6
• 16 28 8.3
2 TW 2"
• • 50 SS 55
16.7 5.0
9Q\‰" 8Q\„" 25
• • 80 17.3 5.2
• • 100 16.7 5.0 SCREEN MESH OPENINGS
• 16 28 5.8
• • 50 16.7 3.5 Mesh Size of Mesh Size of
21⁄2 TW 2Q\„" • • 80 SS 55 17.3 3.6 9Q\‰" 8Q\„" 20Q\„ Size Opening Size Opening
• • 100 16.7 3.5 16 .045" 100 .006"
• • 50x40 SS 74 15.5
30 .021"
40 x 200
.003"
21⁄2 TWC 2Q\„" • • 80x70 SS 183 62 12.9 10" 20Q\„" 69 Dutch Weave
Perf. Screen Brass 69 14.5
50 .011" 16P Perforated
• • 50x40 SS 74 10.0 .045" Diam.
80 .007" Sheet
3 TWC 3" • • 80x70 SS 183 62 8.3 10" 20Q\„" 64
Perf. Screen Brass 69 9.4
• • 50x40 Monel 129 10.1
4 TWC 4" • • 80x70 Monel 318 108 8.5 12" 26Q\„" 107
Perf. Screen Brass 119 9.4 ORDERING INFORMATION
for 3" • • 50x40 SS 74 10.0
3 TWF pipe
**
• • 80x70
Perf. Screen
SS
Brass
183 62
69
8.3
9.4
11" 20Q\„" 75
16106- 2 TW-SS 100
for 4" • • 50x40 Monel 129 10.1
4 TWF pipe • • 80x70 Monel 318 108 8.5 13" 26Q\„" 130 Strainer Inlet/ Strainer Material Mesh
Perf. Screen Brass 119 9.4 Prefix Outlet Type Code Size
** Number Connec-
for 6" • • 50x40 Monel 278 9.6 (9830, tion
6 TWF pipe • • 80x70 Monel 685 231 8.0 17" 32" 275 16106
only)
Size
** Perf. Screen Brass 255 8.8
• 16 10.5 19.8
9830-3⁄4TW E\‰" • • 50 SS 21 6.3 11.8 5Q\‰" 7" 8E\‰
• • 100 6.3 11.8 3 TWC - 16P
• • 16 10.5 12.2
9830-1TW 1" • • 50 SS 21 6.3 7.3 5Q\‰" 7" 8Q\„ Inlet/ Strainer Mesh
• • 100 6.3 7.3 Outlet Type Size
Connec-
16 15.5 7.6 tion
16106-11⁄2TW-B 50 9.3 4.6 Size
1Q\„" 80 SS 31 9.6 4.7 7Q\‰" 6E\‰" 13Q\ˆ
16106-11⁄2TW-SS 100 9.3 4.6
16 28 8.3
16106-2TW-B 50 16.7 5.0
2" 80 SS 55 17.3 5.2 9Q\‰" 8Q\„" 25
16106-2TW-SS 100 16.7 5.0
16 28 5.8
16106-21⁄2TW-B 50 16.7 3.5
2Q\„" 80 SS 55 17.3 3.6 9Q\‰" 8Q\„" 20Q\„
16106-21⁄2TW-SS 100 16.7 3.5
*30 mesh and 40 x 200 Dutch Weave mesh also available for Type TW.
**Flange connection
Liquid Strainers
LOW-MEDIUM PRESSURE
TYPE 122
122-PP 122-PC
polypropylene bowl & polycarbonate bowl &
head 150 psi/10 bar polypropylene head
1⁄2)-3⁄4) NPT or BSPT (F) 150 psi/10 bar
1⁄2)-3⁄4) NPT or BSPT (F)
G
13
FLUIDLINE ACCESSORIES
DESIGN FEATURES
Model 122 liquid strainers are Both model strainers feature hand Model 122-PC features a
ideal for lower volume applica- removable guide bowls. Various polypropylene head with a “clear” —1
tions at medium pressures. screen mesh sizes are available. and UV-resistant polycarbonate
bowl for easy visual inspection of
The Model 122-PP features a The Model 122 strainers have
the internal screen.
polypropylene bowl and head for a maximum pressure rating of
corrosion and chemical resistance. 150 psi (10 bar). They are avail-
able with 1⁄2) or 3⁄4) NPT or BSPT
(F) pipe connections.
—2
G
14
FLUIDLINE ACCESSORIES
DESIGN FEATURES
Model 124 liquid strainers Model 124A-PP-PC strainers with Model 124A-SC-NYB offers a
feature extra large stainless steel polycarbonate bowls provide easy self-cleaning design. The strainer
screens for maximum flow rates. visual inspection of the internal allows the filtered liquid to pass
The larger screens also allow for screen and are UV-resistant. through, while any liquid particles
less frequent cleaning and are returned back to the liquid
The strainers will accommodate
maintenance. supply through a return outlet.
pipe sizes ranging from 3⁄4) to 21⁄2),
Various material combinations and will operate at pressures from The self-cleaning strainer is
are available – including nylon, 75 psi (5 bar) to 150 psi (10 bar). useful in many applications
polypropylene, polycarbonate, including those where produc-
Model 124ML-AL provides
cast iron, and aluminum. Each is tion processes leave little time
mounting holes that allow for
resistant to certain chemicals. for strainer inspection.
mounting to machinery or an
The aluminum version strainers
angle iron.
are ideal for applications requir-
ing a more lightweight unit.
Liquid Strainers
LOW-MEDIUM PRESSURE
TYPE 124 (CONT.)
PERFORMANCE DATA
SCREENS DIMENSIONS Approx.
Pipe
Flow Rate
Conn. Mesh OPEN AREA
Strainer Net with
Strainer Female • Single Full
Head Screen Times Weight 5 psi
No. NPT ••Double Area A B
Material lbs. Pressure
G
or No. Sq. Inlet
Rein- sq. in. inch Pipe Drop
BSPT forced Area in gpm
124A-3⁄4-I Cast Iron 21⁄8 15
43⁄16) 6)
124A-3⁄4-AL 1
Aluminum • 16 16903-1
FLUIDLINE ACCESSORIES
124ML-3⁄4-AL
8.6 16.1
124A- ⁄4-NYB
3
Nylon • 30 16903-3 33⁄4) 63⁄4) 0.6
6.9 13.0 23
124A-3⁄4-PP 3
⁄4" Polypropylene • 50 16903-4
5.1 9.6
124A-3⁄4-PP-PC Polypropylene • 80 16903-5 63⁄4) 0.4
5.3 10.0 33⁄4)
124A-3⁄4-NYB-PC Nylon
124A-3⁄4SC-NYB Nylon ** * 8) 0.7
17
124A-1-I Cast Iron 21⁄8
43⁄16) 6)
124A-1-AL 1
124ML-1-AL Aluminum • 16 16903-1
8.6 9.9
124A-1-NYB Nylon • 30 16903-3 33⁄4) 63⁄4) 0.6
6.9 8.0 34
124A-1-PP 1" Polypropylene • 50 16903-4
5.1 5.9
1— 124A-1-PP-PC Polypropylene • 80 16903-5 63⁄4) 0.4
5.3 6.2 33⁄4)
124A-1-NYB-PC Nylon
124A-1SC-NYB Nylon ** * 8) 0.7
124-11⁄4-I Cast Iron • 16 15941-1 20.8 13.9 43⁄4
124-11⁄4-AL • 30 15941-2 16.7 11.2 53⁄8) 8)
124ML-11⁄4-AL 11⁄4" Aluminum • 50 15941-3 12.4 8.3 21⁄2 60
124-1 ⁄ -NYB
14
Nylon • 80 15941-4 12.9 8.6 5⁄)
18
9⁄) 14
1⁄14
41
124-11⁄2-I Cast Iron • 16 15941-1 20.8 10.2 41⁄2
2—
124-11⁄2-AL • 30 15941-2 16.7 8.2 53⁄8) 8)
124ML-11⁄2-AL 11⁄2" Aluminum • 50 15941-3 12.4 6.1 21⁄2 70
124-1 ⁄ -NYB
12
Nylon • 80 15941-4 12.9 6.3 5⁄)
18
9⁄) 14
1⁄14
Page G15
HIGH PRESSURE STRAINERS SWIVEL CONNECTORS
15925 8310A 5082 4386
50 mesh screen (bottom bottom plug for flush cleaning/ single 280° swivel double 280° swivel
plug for flush cleaning) choice of screens 1⁄8"- 1⁄4" NPT or BSPT (F) 1⁄8"- 1⁄4" NPT or BSPT (M)
3 ⁄4"- 1" NPT or BSPT (F) 1⁄4"- 1⁄2" NPT or BSPT (F)
Write for Data Sheet 5082. Write for Data Sheet 4386.
G DESIGN FEATURES
16
Swivel connectors allow exact ranges of 280° or 360°. They are
2820 positioning of spray nozzles at any available with NPT or BSPT inlet
FLUIDLINE ACCESSORIES
in-line design/choice of screens angle within the swivel arc range. and outlet connections of !\°" and
1⁄4"- 1⁄2" NPT or BSPT (F) A slight turn of the locknut holds !\›". These swivel connectors
the swivel in place with no slipping. operate at pressures up to
DESIGN FEATURES Swivel connectors feature single 125 psi (9 bar) except type
or double swivel bodies and arc 10314 which operates up to
Model 15925 liquid strainers fea- 600 psi (42 bar).
ture a black oxide-coated mild ORDERING INFORMATION
steel body with a 50 mesh stain-
less steel screen. 15925 strainers Inlet Outlet
operate at pressures up to 2000 Pipe Pipe DIMENSIONS
Swivel Swivel
psi (138 bar). A removable Conn. Conn. Net
Type Connector Material Arc
bottom pipe plug provides an ORDERING INFORMATION Order No.
(F) (F) Overall Overall Weight
Range
easy method for flush cleaning. NPT or NPT or Width Height
Write for Data Sheet 15996. 15925 BSPT BSPT
1⁄8)
Inlet and Outlet Conn. 5082-1⁄8 x 1⁄8 1⁄8)
Model 8310A liquid strainers Stainer No.* NPT or BSPT (F) 1⁄4)
5082-1⁄8 x 1⁄4
offer stainless steel construction 1⁄8) Brass 1E\‰" 2" 5 oz. 280°
15925-3⁄4 E\‰" 5082-1⁄4 x 1⁄8 1⁄4)
throughout with a choice of
15925-1 1" 1⁄4)
screen mesh sizes. 8310A strain- 5082-1⁄4 x 1⁄4
ers operate at pressures up to *With 50 Mesh Screen 7618-1⁄8 x 1⁄8 1⁄8) 1⁄8) Brass 2Q\„ oz.
1E\‰" 1"
5000 psi (350 bar). A removable 8310A Single 7618-1⁄8 x 1⁄8-AL Alum. 1Q\„ oz.
bottom pipe plug provides an Swivel 7620-1⁄8 x 1⁄4 1⁄8) 1⁄4) Brass 2Q\„ oz.
easy method for flush cleaning. Inlet and Outlet Conn.
Stainer No.* NPT or BSPT (F) 7620-1⁄8 x 1⁄4-AL Alum. 1Q\„ oz. 360°
Write for Data Sheet 8310A. 2" 1Q\‰"
8310A- ⁄ -*
14
Q\‰" 7620-1⁄4 x 1⁄4 1⁄4) 1⁄4) Brass 2Q\„ oz.
Model 2820 in-line strainers 8310A-3⁄8-* E\ˆ" 7620-1⁄4 x 1⁄4-AL Alum. 1Q\„ oz.
feature a stainless steel body 8310A-1⁄2-* Q\„" 1⁄8) 1⁄4)
10314-1⁄8 x 1⁄4 Brass 1U\ŒÁ" 1T\ˆ" 4 oz.
with a stainless steel or Monel *Specify Mesh size (16, 30, 50 or 100) 11717-1⁄4 x 1⁄4 * ⁄4) *1⁄4) Brass
1 1E\‰" 2E\ˆ" 6 oz. 280°
screen in a choice of mesh sizes. 4203D-1⁄8 x 1⁄8 1⁄8)
2820 strainers operate at pres- 2820 4203C-1⁄8 x 1⁄4
1⁄8)
1⁄4)
sures up to 5000 psi (350 bar). Inlet Conn. Outlet Conn. 1⁄8)
Brass 2Q\„" 2" 6 oz.
Stainer NPT or NPT or 4203A-1⁄4 x 1⁄8 1⁄4)
No.* BSPT (F) BSPT (F) 4203B-1⁄4 x 1⁄4 1⁄4)
QUICK 2820-1⁄4-* Q\‰" Q\‰" 4386-1⁄8 x 1⁄4 1⁄8) *1⁄4)
Brass 8 oz.
280°
COUPLERS 2820-3⁄8-*
2820-1⁄2-*
E\ˆ"
Q\„"
Q\‰"
Q\‰"
4386-1⁄8 x 1⁄4-AL Alum.
2Q\„" 2Q\‰"
6 oz.
4386-1⁄4 x 1⁄4 1⁄4) Brass 8 oz.
*1⁄4)
19610 *Specify Mesh size (16, 30, 50 or 100) Double 4386-1⁄4 x 1⁄4-AL Alum. 6 oz.
Swivel 7205-1⁄8 x 1⁄8 Brass 3Q\„ oz.
cam type/316SS ing nozzles, headers or hoses. 1⁄8) 1⁄8)
2Q\‰" 1"
1" - 3" NPT or BSPT (F) Two cam lock handlers with pull 7205-1⁄8 x 1⁄8-AL Alum. 2 oz.
rings lock the coupler securely in 7450B-1⁄8 x 1⁄4 1⁄8) 1⁄4) Brass 3Q\„ oz.
place without the use of tools. 7450B-1⁄8 x 1⁄4-AL Alum. 2 oz.
360°
19610 couplers are constructed 7450C-1⁄4 x 1⁄8 1⁄4) 1⁄8) Brass 3Q\„ oz.
entirely of 316 stainless steel 2E\‰" 1Q\‰"
7450C-1⁄4 x 1⁄8-AL Alum. 2 oz.
with a VITON gasket. They 7450A-1⁄4 x 1⁄4 Brass 3Q\„ oz.
1⁄4) 1⁄4)
operate at pressures up to 250
psi (17 bar) and are available in 7450A-1⁄4 x 1⁄4-AL Alum. 2 oz.
a variety of connection sizes. *Indicates Male Thread Conn.
Model 19610 quick couplers 19610 couplers and adapters
provide a fast and easy method are interchangeable with other
for connecting and disconnect- major manufacturers. Write for
ORDERING INFORMATION
Data Sheet 19610. TANK MIXING EDUCTOR
ratio. Capable of circulating large
Pipe Conn. Hex. Size Overall Maximum
Y9270-PP volumes of liquid, the eductor
Coupler Assembly nozzle prevents settling, as
NPT or For Adapter Length Pressure
No. agitation assures uniform mix-
BSPT (F) & Coupler (Approx.) psi (bar)
ture of chemical solutions. It’s
19610-1-316SS 1) 15⁄8) (42 mm) 31⁄4) (83 mm) 250 (17)
constructed of fiberglass
19610-11⁄4-316SS 11⁄4) 2) (51 mm) 321⁄32) (93 mm) 250 (17) reinforced polypropylene for
19610-11⁄2-316SS 11⁄2) 29⁄32) (58 mm) 37⁄16) (87 mm) 250 (17) excellent chemical and heat
19610-2-316SS 2) 23⁄4) (70 mm) 43⁄8) (112 mm) 250 (17) Spraying Systems’ eductor resistance (194°F, 90°C). #\°" and
19610-21⁄2-316SS 21⁄2) 35⁄16) (85 mm) 43⁄4) (121 mm) 225 (15) nozzle increases circulation #\›" NPT or BSPT connections
19610-3-316SS 3) 4) (102 mm) 431⁄32) (127 mm) 200 (14) rates of small pumps by a 4:1 are available.
Appendix
TRADEMARK REGISTRATIONS
AND OWNERSHIP
Trademark Property of:
Celcon ® Hoechst Celanese Corporation
Delrin® E.I. DuPont de Nemours and Company
Duranickel ® Inco Alloys International, Inc.
Everdur ® BancBoston Financial Company
Fairprene ® E.I. DuPont de Nemours and Company
Hastelloy® Haynes International, Inc.
Haveg ® Ametek, Inc.
Illium ® Stainless Foundry & Engineering, Inc.
Incoloy ® The International Nickel Company, Inc.
Inconel® Inco Nickel Sales, Inc.
Kynar ® Atochem North America, Inc.
Lucite ® E.I. DuPont de Nemours and Company
Monel ® The International Nickel Company, Inc.
Refrax® The Carborundum Company
Ryton ® Phillips Petroleum Company
Stellite ® Stoody Deloro Stellite, Inc.
Teflon ® E.I. DuPont de Nemours and Company
Ultimet® Haynes International, Inc.
Viton ® E.I. DuPont de Nemours and Company
Zircalloy ® E.I. DuPont de Nemours and Company
North American
Sales Engineering Offices
Regional sales offices of
Spraying Systems Co.
products.
Angle Type
INTRODUCTION GENERAL PURPOSE NOZZLES GA-W, GGA-W...............................C33, C34
Spraying Systems Co. Overview ...........2-5 FullJet®
Hollow Cone
KYNAR Series HH-KY ..........................C35
Spray Characteristics.............................6, 7 WhirlJet®
SpiralJet®
Engineering Discussions .....................8-12 Small Capacity
SpiralJet® Threaded
Nozzle Maintenance ...........................13, 14 Standard Angle HHSJ .......................................................C36
A, AX, B, BX.....................................C2, C3
SpiralJet® Flanged
Wide Angle
QUICKJET® SYSTEM A-W, AX-W, B-W, BX-W .........................C4
HFSJ .......................................................C37
SpiralJet® Extra Large Free Passage
QuickJet® Components.....................A2, A3 Extra Wide Angle HHSJX ..................................................C38
Hollow Cone E..............................................................C5
Flat Spray
Quick WhirlJet® Medium-Large Capacity VeeJet®
QA, QLA .....................................................A4 C, CX, D ...........................................C6, C7 Standard Type
QA-W, QLA-W ............................................A5 H-VV, H-VVL, H-U, U....................C40-C43
QAP ............................................................A6 Large Capacity
CRC, CF .................................................C8 VeeJet®
QAP-W .......................................................A7
KYNAR Series HVV-KY, HU-KY ...........C44
Full Cone 9360 Polypropylene FlatJet®
Quick FullJet® AP, LAP, LBP...................................C9-C11 Narrow Angle–High Impact
QG, QLG ....................................................A8 In-Line Series P...................................................C45, C46
QH, QLH.....................................................A9 BD .........................................................C12 FloodJet®
QH-W, QLH-W .........................................A10 Wide Angle, For Liquid, Air & Steam
QH-SQ, QLH-SQ......................................A11 Miner Nozzles
K............................................................C47
QG15, QG30, QLG15, QLG30 ................A12 BDM......................................................C13
QG-W, QLG-W .........................................A13 WashJet®
30° HollowJet® High Pressure-Washing
ProMax® G, H.......................................................C13 MEG, MEG-SSTC, QCMEG, MEF
QPH .................................................A14, A15
High Pressure SprayDry® 23990, 24055...............................C48, C49
H-KY .........................................................A16
AA, BB, AAA, 104 ........................C14, C15 High Pressure-Coating
Flat Spray RotoClean® Attachments
Offset Type
Quick VeeJet® 106A, 220A .................................C50, C51
QSU-KY, QSVV-KY ..................................A17 BA .........................................................C16
RotoClean® Attachment
QSVV, QSU, QVV, QU, QLU............A18-A21 DeflectoJet® 225........................................................C52
ProMax® 8686......................................................C16
Fine Spray
QPT..................................................A22, A23 SpiralJet® Threaded Type FogJet®
Quick FlatJet® BSJ .......................................................C17 Large Capacity/Wide Angle
QLP ..........................................................A24 SpiralJet® Flanged Type 7N, 7G .....................................................C54
Quick FloodJet® BFSJ .....................................................C18 Hydraulic Atomizing
QTK, QSTK ..............................................A25 Fine Spray/Hollow Cone
Quick WashJet® Full Cone LN, LNN-W, LN-D, N, N-W, M................C55
QEG..........................................................A26 FullJet® FogJet®
Standard Spray Angle Large Capacity/Narrow Angle
G, GG, H, HH ........................C20, C22, C23 FF, F ........................................................C56
UNIJET® SYSTEM Wall Mounted
UniJet® System Components............B2-B5 GD, GGD, HD.................................C21-C23
Quick UniJet® System ........................B6, B7 Angle Type AIR ATOMIZING NOZZLES
Hollow Cone GA, GGA.........................................C21-C23 Basic Nozzle Installations ..........................D2
TX, T-W ......................................................B8 Square Spray How to Order, Material Code,
D ........................................................B9, B10 G-SQ, GG-SQ, H-SQ, HH-SQ ......C24, C25 Choice of Spray Set-Ups ...........................D3
Full Cone Oval Spray 1/8J & 1/4J
TG .............................................................B11 G-VL, GG-VL ..........................................C26 (Basic Nozzle Parts & Assemblies) ...........D4
TG-SQ ......................................................B12
TG-W ........................................................B13 Vaneless Air Atomizing Nozzle Body Assemblies
TH-W ........................................................B14 GANV, GGANV.......................................C27 W/Strainer, Miniature, Back Connect,
D ..............................................................B15 Extensions, Top Inlet, Steam Jacket,
DistriboJet® Thick Walls, Thin Walls, Screw Mount,
Flat Spray R, RR, RF.............. .........................C28, C29 Top Inlet, 20470 Lube Gun, Swivel,
TP .....................................................B16-B19 FullJet® Cluster Type, Twin Spray ...........................D5
TK .............................................................B20
Narrow Angle -15° Pressure Spray Set-Ups
High Pressure G15, GG15, H15.....................................C30 Round Spray, Deflected Flat Spray ...........D6
EG ............................................................B21 Wide Angle Round Spray,
TC ....................................................B22, B23 Narrow Angle -30°
360° Circular Spray....................................D7
G30, GG30, HH30 ..................................C31
Fine Spray Flat Spray ...................................................D8
TN, TNSSTC ............................................B24 Wide Angle
Siphon/Gravity-Fed Spray Set-Ups
23825, HV ORIFICES, 11430, G-W, GG-W, H-W, HH-W ...............C32-C34
Round Spray, Flat Spray............................D9
BLOW-OFF NOZZLES.........................B25 Square Spray, Wide
22624, 23945 ...........................................B26
Pressure Spray Set-Ups (External Mix)
H-WSQ, HH-WSQ .........................C33, C34 Flat Spray ........................................D10, D11
Master Index