Professional Documents
Culture Documents
ELECTRONICS PLANT
DATE 06.07.2010
BULLETIN
NO
ELK-10/11-REVISED
CHASSIS T6
DESCRIPTION :
SOLUTION:
1.) Change IC900 with 453763R-1 IC-SMD MP2205ADL QFN14 T&R coded
component,
2.) Change R902 with 173129R RC-CHIP 12K %1 1/16W /0603 coded
component,
3.) Change R903 with 173396R RC-CHIP 39K %1 1/16W /0603 SERITLI
coded component,
1/4
IF, as seen in figure 2, there is capacitor on the R903 (typical handmade
modification), remove resistor and capacitor from R903 position. After
removing them, add ONLY 173396R RC-CHIP 39K %1 1/16W /0603 SERITLI
coded chip resistor on R903 position.
There is extra rework which must be applied also depends on the features of the
chassis.
2/4
For chassis without DVD and USB; firstly remove the ferrite bead from L903 and then
transfer the removed component to the L902 position. Or you can use 055626R
FERRITE BEAD-CHIP 120R/100MHZ 3A/1206 coded ferrite bead instead of
removed component for L902 position.
3/4
Figure 6. Another chassis with USB(Chameleon)
There is no extra rework method for chassis with DVD and/or USB. Only check that
ferrite bead must be on L903 position.
4/4