eee ee
Conevucien Indies 2, Sa
‘SEALANT FOAM TAPE
i ‘This is @ 10 m ong, 10 mm wide and 3 mm thick (and more a
er your order) rolled tape with one strong adhesive side.
{tis used to prevent leakage of concrete laitance from the
* formwork,
‘CONCRETE FOAM HASP TAPE
‘Tho HASP tape consists of pressed foam on one sie, covered
_with strong waterproof adhesive used to fade out formwork seam,
“The dimensions are 10x20x1500 mm.
Installation procedures: First remove the olly surface, make
sure there is no residue onthe concrete surface, wpe with lean
cloth to make it completly dry and then fx tho tape,
_. Plastic Spacers For Reinforced Concrete Cover
‘Quality . Strength . Reliabi
POZZOLAN
‘Construdion Industries Co
CHAMFERS
TRIANGLE CHAMFERS
Triangle chamfers are made in types A, B and C, used in
rmwork corners. They create a bevel atthe
wooden oF meatal
‘edge of finished columns, beams, slabs anc etc
APLASTIC CHAMFER WITH NAILING FLANGE To install his
i ‘chamfer, tft tho point ot bevel and formwork are aligned then,
the edge of chamfer is nailed to the base plate of the wooden,
formwork
B-PVC CHAMFERS This chamferis placedin the comer of the
wooden formwork and nailed to the formwork at the comer of
the chamfer.
HOOK AND TIE WIRE
Tee wires are used by an instrument called the rotating
hook, especially made for this purpose. This instrument
is designed for three diferent logins to He up a total of
8-12, 14-16 and over 16 robars,
Rolable simple and eight (8) shaped ties are made
possible by using this instrument.
“The tie wires are packed in bundles of 5000 pieces. This
hook can te the looped tires tat come in the fotowing
80mm for 8x8 and below
450mm for G8 to 16x16
180mm for 16x16 and up
Plastic Spacors For Reinforced Concrete Cover
ee