lystration perteining to Qpercting Instructions foy
WOHLHAUPTER" Universal Facing and Boring Heads
UA4, UPAb-s5, UPAS, UPAS-s&, UAC, UPAG-s7_
lati (
regulating screw (1)
A),
Aza
ot
SQwsats
Contents
of Operating Instructions for WOHLHAUPTER Facing and Boring
bs
i
Section
”
vow bm
a)
>)
°}
7 Ill.
Annexes:
No. 1 in front:
2a at the back:
3 8 "
Heads UPA 4 to UPA 6-8 7
Purpose
The mounting of the Head
Max, admissible Speeds
Lubrication
Turning Inside and Outside Dianeters
Guick-Setting of Slide
Fine-Setting of Slide
Locking the Slide
Facing, Recessing, Underoutting
General notes on Facing
Return of slide
12 self-acting slide feeds
How to increase the feed rate
How to reduce the feed rate
How to release the 12 feed buttons
Self-acting Facing Traverse of Slide
Arresting the feed control collar
Direction of Pacing Traverse
Automatic End Release of Facing Traverse
Sensitiveness to release of the retai:
pin
Release of Retaining Pin
Setting the Stop for Precision End 2
ease
Taper Turning on Machines with Axial Feeds
Calculation of Feeds and Taper Angles
Tool Mounting
Setting the Tool true to Dianeter
Cperating Method for Taper Turning
Thread Cutting with Stationary Component
Straight Thread Cutting
Taper Thread Cutting
Operating Elements of Heads UPA 4 to UPA 6-3 7
Feed Diagram for Taper Turning
Taper Turning with stationary Component
by WOHLHAUPTER Facing & Boring Heads UPA 4
to UPA 6-S 7