Professional Documents
Culture Documents
BRG Carrier PDF
BRG Carrier PDF
6. Does the geometric tolerance on the location of the five holes apply at MMC or RFS?
7. What would the material condition symbol “L” in a circle signify if it appeared in a feature control frame?
8. What is the shape of the tolerance zone for the location of the mounting holes?
9. What two basic dimensions establish the location of the tolerance zones for the mounting holes?
10. What size is the tolerance zone for location of the mounting holes if there exact size is .531?
11. What size is the tolerance zone for location of the mounting holes if there exact size is .533?
12. What is the minimum projected height of the positional tolerance zone for the mounting hole locations?
15. Is the geometric tolerance on the inside groove diameter total runout or circular runout?
19. Calculate the minimum distance between the left side of the 1.874 counterbore and the right side of the
inside groove.
20. Taking all tolerances into consideration, calculate the minimum possible web between the side of a
mounting hole and the OD of the flange.