SERVICE MANUAL
FILE NO. 97 La
Liquid Crystal Colour Model No. PLC-220P
Video Projector
(Europe, Asia, Africa, ME)
Model No. PLC-220PP
NewZealand)
Contents
Safety Instructions ===. 2
Specitcatons « concen
Fundamental Principles of
Lguis Crystal Projector 4
Systom Control Ce
Description nf PLO-220P)PB/PP oo. o..8
Troubloshceting Chart + -+---.25-28--- 20
Lamp Replacement »=2+--++> EI
Mechanical Disasserblias --=+-
LOD Panel Replacements.
(Optical Agjustmenta ===
Convernence Acjusunants
Giearing Metnocs
Service Adjustiienis sas .e +.
(Chassis Electrical Parts Lst =~
Cabinet Parts List += :
Votage & Waveforms
Block Diagrams =
Schomae Diagrams +--
Component and Testpolnt Lecations =. 95
PRODUCT CODE
PAaAA(PLC-220P) ; 1122 008 00
PaAC(PLC-220PP); 1122 008 02
ORIGINAL VERSION
Service PLC-220P.00
Ret. No.
PLC-220PP.09
REFERENCE No. SMs2so14SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS
WARNING: The chassis of this projector is isolated (COLD)
from AC line by using the converter Vanstorner, Primary sie
cf the converter transformer and lamp power supely un circuit
| connected to the AC fine and it fs het, which hot circu i
entitled wit the ling in the schematic diagram. For continued
product safety and protection of personnel injury, servicing
should be mace wih quattied personnel.
‘The folowing precoutions must be observed:
1. An isolation tansfarmar should be cannected in the power
line between tie receiver and the AC ine before any service is
Pertarrnad an the projector,
2. Comply with all cauton and satety-related notes provided
fn the cabinet back, esbiret bottom, inside the cabinet or on
the chassis,
'3, When replacing a chassis in the cabinet, always be certain
that all the protective devices are instaed propery, such as
ccantral knots, acjustment covers or shields and barriers.
DO NOT OPERATE THIS PROJECTOR WITHOUT THE
PROTECTIVE SHIELD IN POSITION AND PROPERLY SE.
CURED.
44 Before replacing the cabinet eovar, Merouphy inspect the
Inside of the cabinet 1o se tat no stray parte or tools have
boon loft insite,
Botore: returning any projecter to the customer, the service
personnel must perform the folowing safety chacks and be
sure that It's completely sale to operate without danger af
lacvical shock,
PRODUCT SAFETY NOTICE
Product safety should be considered when a component
feplacemnent is made in ary area ofthe projector, Components
ated by a mati {yin the parts list and the achemaile
diagram dacignate components In which safeyy can be of
special signiicance, it, therefore, paricueriy recommended
{hat the replacement of these parts must be made by exactly
the same parts,
* SERVICE PERSONNEL ---- WARNING " and the
following or the equivalent : * Eye Damage May
Rosult From Directly Viewing Tho Light Produced By
‘Tho Lamp Used In This Equipment.
Always Turn Off Lamp Before Opening Cover.
Ultraviolot Radiation Eye Protection Required During
This Servicing,”
Never turn the power on without the lamp to avoid
‘electric - shock or damage of the devices since the
stabilizer generates high voltages(10kV - 15kV) at its
start,
‘Since the lamp is vory high temperature during units
‘operation replacement of the lamp should be done at
least one hour ator the power has been tured off,
to allow the lamp cool - off.SPECIFICATIONS
Projector Type Portable LO colour video projector
Dimensions (Hx Wx D} 263 mm X 268 rm x 650 mm
Net Weight 13.6 ka (28.9 Ibs)
LGD Pansi Syatern 3.7 TFT Active Matrix type ( Thin Film Transistor) x9
Number of Pixels 396,400 (112,800 * 8)
‘Colour System 4 colour system (PAL, SEGAM, NTSG4.49 and NTSC)
Projactian Image Size (Diagonal) | 61 om ia762 om (2010900 inch) Adjustable
Gonirast Ratio 1004
Horizontal Resolution 450 TWiines
Projectian Lens 14.2 4.5 lens with 15mm ~ 270 mm Mator-drive zoom and focus
[Lens Aperture | 67mm
“Throw Distance 7 9m-19.4m
Projection Lamp Metal Halide, 180 watt
Projection Mieror Dichrole mirror system
"AV input jacks PHONO Type X 1 (video, Audie Fland 1),
DIN 4 pin (S-Video) %.1 and 21 pin (SGART) x 1
‘Audio Monitor Output Jacks PHONO Type x4 (R and L)
Bulltin Speaker SW RMS
Image Elevation Adjustment Ups* , Downs
Voltage 220 ~ B40V AC, 50/60 He
Power Consumption 260 Watts
‘Operating Temperature SC = 38
Storage Temperature =o = 60°C
Remote Control Battery ‘AA, UMS or ROS type x 5
‘Standard Accessories ‘Homote Control Unit, FC Cable (1.5m), AC Cord
“Onmer's Instruction Manual, Protective Dust Cover